Caseta Wireless In-Wall Dimmer SPEC (369804)

Caseta Wireless In-Wall Dimmer SPEC (369804)
CasétaT Wireless
PD-6WCL
In-Wall Dimmer
369804c 1 06.19.14
CasétaT Wireless In-Wall Dimmer
The CasétaT Wireless in-wall dimmer controls
lighting loads automatically through wireless sensors
and wireless remote controls, providing a system that
delivers energy savings, convenience, and ease of
installation.
The CasétaT Wireless in-wall dimmer uses LutronR
patented Clear ConnectR RF Technology, which
enables wireless communication with Radio Powr
SavrT sensors and PicoR remote controls for total
load control.
Receiving Device
CasétaT Wireless
In-Wall Dimmer
Transmitting Devices
Radio Powr SavrT Sensors
Ceiling-mounted
occupancy / vacancy
sensor
Wall-mounted
occupancy / vacancy
sensor
Features
•The CasétaT Wireless in-wall dimmer provides
dimming of multiple load types and allows remote
control and occupancy/vacancy sensing when paired
with wireless transmitting devices.
PicoR remote control
•LutronR patented Clear ConnectR RF Technology
works through walls and floors.
•Includes Front Accessible Service Switch (FASST) for
safe lamp replacement.
•Two-wire dimmer ideal for retrofit applications.
No neutral required.
•Power failure memory: If power is interrupted, the
control will return to its previously set level prior to
interruption.
•Works with dimmable LEDs and CFLs as well as
incandescent and halogen light bulbs.
Load Types and Capacity*
LED
up to 150 W
CFL
up to 150 W
Halogen
up to 600 W
Incandescent
up to 600 W
*See Ganging and Derating section.
SPECIFICATION SUB MIT T AL
Job Name:
Job Number:
Model Numbers:
Page 1
CasétaT Wireless
PD-6WCL
In-Wall Dimmer
369804c 2 06.19.14
Specifications
Regulatory Approvals
System Communications and Capacity
•cULus Listed
•NOM certified
•FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
•Industry Canada certified
•COFETEL certified
Power
Operating voltage:
120 V~ 50/60 Hz
•The CasétaT Wireless in-wall dimmer communicates
with the PicoR remote controls and Radio Powr
SavrT sensors through radio frequency (RF).
•The CasétaT Wireless in-wall dimmer must be
located within 60 ft (18 m) line-of-sight or 30 ft (9 m)
through walls, of PicoR remote controls and Radio
Powr SavrT sensors.
•Up to ten transmitting devices may be associated to
each in-wall dimmer.
Environment
Key Design Features*
•Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with
IEC 61000-4-2.
•Tested to withstand surge voltages without damage or
loss of operation, in accordance with
IEEE C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
•Dimmers always operate locally and do not require
system control.
•Power failure memory: should power be interrupted,
the control will return to its previously set level prior to
the interruption when power is restored.
•Uses LutronR ClaroR wallplates or designer‑style
wallplates from other manufacturers. Wallplates are
sold separately.
•LutronR ClaroR wallplates snap on with no visible
means of attachment.
•Requires a 1-gang U.S. wallbox. 31⁄2 in (89 mm) deep
recommended, 21⁄4 in (57 mm) deep minimum.
•Green LEDs indicate load status.
•Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%-90% humidity, non-condensing.
Indoor use only.
* For advanced features, tips on how to use CasétaTM Wireless dimmers with CFLs and LEDs, the complete CasétaTM Wireless product line, and
more, please visit www.casetawireless.com/features
SPECIFICATION SUB MIT T AL
Job Name:
Job Number:
Model Numbers:
Page 2
CasétaT Wireless
PD-6WCL
In-Wall Dimmer
369804c 3 06.19.14
Operation
In-Wall Dimmer
Status LEDs
Indicate load status
On
Raise
Lower
Off
TM
S
• FA STM •
• FASSTM •
TM
SSTM • FASS
FA
FASST
Front
Accessible
Service
Switch
•
SSTM FASS
FA
IMPORTANT NOTICE:
FASST - Front Accessible Service Switch - to service load, remove power by pulling the FASST switch out
completely on Switch. After servicing load, push the FASST switch back in fully to restore power to the control.
Mounting
Dimmer
Mounting
Screws
Adapter
Mounting
Screws
Wallbox
Dimmer
Wallplate / Adapter purchased
separately.
SPECIFICATION SUB MIT T AL
Job Name:
Job Number:
Model Numbers:
Page 3
CasétaT Wireless
PD-6WCL
In-Wall Dimmer
369804c 4 06.19.14
Dimensions
Side View
Front View
411⁄16 in
(119 mm)
215⁄16 in
(75 mm)
5/16 in
(8 mm)
11⁄8 in
(30 mm)
Ganging and Derating
When ganging with other controls in the same wallbox, derating is required.
See Load Type and Capacity chart.
Do not remove outside fins on
end of gang controls
Load Type and Capacity *
A
CFL/LED Total Wattage
B
Each control has
inside fins removed
Middle of gang
control has all fins
removed
B
C
B
Incandescent/Halogen Total Wattage
A
0W
1 W – 25 W
26 W – 50 W
51 W – 75 W
76 W – 100 W
101 W – 125 W
126 W – 150 W
B
+
+
+
+
+
+
+
600 W
500 W
400 W
300 W
200 W
100 W
0W
B
500 W
400 W
300 W
200 W
100 W
50 W
0W
C
400 W
300 W
200 W
100 W
50 W
0W
0W
• Mixing bulb types (using a combination of CFL / LED and incandescent / halogen
bulbs) reduces maximum wattage as shown in the chart above.
• In-wall dimmer has a minimum load requirement of 25 W or one bulb from the
compatible bulb list.
*See www.casetawireless.com/bulblist for the latest list of compatible bulbs.
SPECIFICATION SUB MIT T AL
Job Name:
Job Number:
Model Numbers:
Page 4
CasétaT Wireless
PD-6WCL
In-Wall Dimmer
369804c 5 06.19.14
Wiring Diagrams
Single Location Installation
Line / Hot
Black
CasétaT
Wireless
In-Wall
Black
Dimmer
Green
120 V~
50 / 60 Hz
Load
Ground
Neutral
Multi-Location Installation
With Pico® remote controls (PJ2-XX-XX) and wallbox mounting adapters (PICO-WBX-ADAPT)
Black
Black
Line / Hot
Pico
remote
control
and
wallbox
mounting
adapter
Pico
remote
control
and
wallbox
mounting
adapter
CasétaT
Wireless
In-Wall Black
Dimmer
Green
120 V~
50 / 60 Hz
Load
Ground
Neutral
Colors and Finishes
Gloss Finishes
White
WH
Black
BL
Ivory
IV
Light Almond
LA
ue to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual
D
product colors.
SPECIFICATION SUB MIT T AL
Job Name:
Job Number:
Model Numbers:
Page 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement