Liquidynamics Product Catalog 5/08

Liquidynamics Product Catalog 5/08

U

FL

ID

A

H

N

D

LI

G

N

TE

C

H

N

O

LO

Y

G

O urr C pa nyy

Since the founding of Liquidynamics in 1996, we have experienced tremendous growth, thanks to our many loyal customers. At that time we pledged to provide excellent products, service and value.

With this updated catalog, we continue this tradition by introducing a significantly improved product line in terms of reliability, performance and value.

In addition to product improvements and the introduction of many new items, we are proud to be able to offer an excellent value for your dollar.

Consistent with our goal of providing our customers with innovative products, you will find many new, unique and interesting items within the following pages.

With the foregoing in mind, we would like to renew our commitment to provide our customers with superior products and service. Liquidynamics will continue to provide products and customer service second to none in quality and performance, while remaining competitively priced.

As always, we are interested to hear from you if there is anything that we can do to better serve you.

Sincerely,

Frank Russold

President

ALPHABETICAL INDEX

Fuel Nozzles, Accessories . . . . . . . . . . . . . . . . . . . . . . 111

Grease Pump Accessories . . . . . . . . . . . . . . . . . . . . 75-76

Grease Gun Accessories . . . . . . . . . . . . . . . . . . . . . . . . 85

Hose Reel Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 71

Meter Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Oil Bar Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Oil Pump Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Oil Extractor Accessories . . . . . . . . . . . . . . . . . . . . . . . 103

Pneumatic Oil Pump Accessories . . . . . . . . . . . . . . . . 7-8

Storage Tank Accessories . . . . . . . . . . . . . . . . . . . . . . . 52

Tote (IBC) System Accessories . . . . . . . . . . . . . . . . . . . 19

B ullkk T

C on

Reeg nssffeerr P um orrss . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Double Diaphragm Kits . . . . . . . . . . . . . . . . . . . . . . . . . 11

Electric Oil Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Pneumatic Grease Pumps, Stationary . . . . . . . . . . . . . . 77

Pneumatic Grease Pump, Mobile . . . . . . . . . . . . . . . 77-78

Pneumatic Oil Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . 9

Poly Tank Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-23

Mobile Oil Pump Kits, Pneumatic . . . . . . . . . . . . . . 28-31

Mobile Oil Pump Kits, Hand Operated . . . . . . . . . . . . . . 35

Mobile Oil Dispensers . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Used Oil Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Wall Mount Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Lube Bar/Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Electronic Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-44

Electronic, Non-Preset . . . . . . . . . . . . . . . . . . . . . . . 45-46

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Grease Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

In-Line Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-50

Mechanical Oil Meters . . . . . . . . . . . . . . . . . . . . . . . 41-42

Pulsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Remote Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Drru m H dlliin g,, D olllliieess . . . . . . . . . . . . . 26-27

Oiill P um

Oiill P um

FFiillttrraattiio Caarrttss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89-91

Lo w P

FFiittttiin gss,, H waarree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 un

Haan neellss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

H ossee

Caad

Grreeaassee C

Grreeaassee G d P d P dyy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 on um nss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83-84 mp

Air/Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Air/Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65-67

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-65

Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-61

P um

Double Diaphragm Pumps . . . . . . . . . . . . . . . . . . . . . . 10

Electric Oil Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14

Gasoline, Diesel Pumps, Electric . . . . . . . . . . . . . 107-110

Gasoline, Diesel Pump, Hand . . . . . . . . . . . . . . . . . . . 110

Pneumatic Grease Pumps . . . . . . . . . . . . . . . . . . . . . . . 74

Pneumatic Grease Pumps w/camlock . . . . . . . . . . . . . . 81

Piston Oil Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Seelleeccttiio n G

Mobile Oil Cart Selection Guide . . . . . . . . . . . . . . . . 30-31

Oil Reel System Selection Guide . . . . . . . . . . . . . . . . . . 16

Pneumatic Grease Pump Selection Guide . . . . . . . . . . . 79

Pneumatic Oil Pump Selection Guide . . . . . . . . . . . . . . . 4

Poly Tank System Selection Guide . . . . . . . . . . . . . . . . 23

Tank System Selection Guide . . . . . . . . . . . . . . . . . . 17-18

Tote (IBC) System Selection Guide . . . . . . . . . . . . . . . . 20

Tank Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Steel Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Poly Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

T hrreeaad

Waallll M ou ntt P um www.liquidynamics.com

3

4

NEW OIL PUMP SELECTION GUIDE

Oil Pump Selection Guide

Pressure Ratio 1:1

P/N

32091, 32095, 32071, 32072

AND

D.D. Pumps

The 1:1 piston pumps are an economical way to transfer new engine oil, hydraulic fluid, transmission fluid and 100% antifreeze for distances of approximately 100 ft. or less.

Double Diaphragm pumps are ideal for transfer of used oil, as well as fluids mentioned above. Maximum output pressure is 120 PSI.

Pressure Ratio 3:1

P/N

20001T, 20073T

AND

20094T

An excellent choice for pumping engine oil, gear oil, hydraulic fluid, transmission fluid and antifreeze over distances of up to 150 ft. These pumps will service several dispensing points simultaneously. Maximum output pressure is 360 PSI.

Pressure Ratio 5:1

P/N

21100T, 21073T

AND

21094T

These pumps will do everything the 1:1 and 3:1 pumps do, but can be used to transfer fluid up to

200 ft. and will still service several dispensing points simultaneously. Maximum fluid pressure output is

600 PSI.

High Volume 5:1 Ratio Pumps

P/N

21200

AND

21300

These pumps also have a maximum fluid pressure output of 600 PSI but have flow rates more than twice the output of normal 5:1 pumps. These pumps are an excellent choice for high flow applications in truck shops or industry where multiple dispense points are required.

High Ratio Oil Pumps

P/N

21400

AND

21500

Higher ratio oil pumps provide additional capability when dealing with long distance oil dispensing, higher viscosities, unusual line restrictions or a combination of these factors. The 21400 pump is a 8:1 ratio pump with flow rates up to 5.5 GPM while the 21500 is a

13:1 ratio pump with a flow rate of 4 GPM. These are both universal stub pumps that can be easily adapted to fit most any tank or drum application.

800.894.3572

PNEUMATIC OIL PUMPS

Part Number

(w/o Bung Adapter)

Part Number

(w/ Bung Adapter)

Ratio

Flow Rate @ 90 PSI (GPM)

Maximum Air Pressure (PSI)

Air Inlet Size

Fluid Inlet Size

Fluid Outlet Size

Noise

Air Consumption (cfm)

Suction Tube Diameter

Suction Tube Length

Fits Drum Sizes (Gal.)

Shipping Weight, lbs.

32091

32091-S1

32095

32095-S1

1:1 1:1

5 5

32071

32071-S1

1:1

15

32072

32072-S1

1:1

15

20001T

20001T-S2

3:1

5

20073T

20073T-S2

3:1

5

20094T

20094T-S2

3:1

5

120 120 120 120 120 120 120

1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT

1” NPT - 1” NPT 1” NPT -

1/2” NPTF 1/2” NPTF 3/4” NPTF 3/4” NPTF 1/2” NPTF 1/2” NPTF 1/2” NPTF

79 db

12

1.65”

11”

Universal

11

79 db

12

1.65”

37”

55

14

79 db

12

1.65”

11”

Universal

13

79 db

12

1.65”

37”

55

15

79 db

12

1.65”

11”

Universal

10

79 db

12

1.65”

29”

16/30

13

79 db

12

1.65”

37”

55

15

Note: For longer pump life and efficiency, we recommend the use of dried air or an air filter. As with any pneumatic equipment, you can expect longer trouble free operation with the use of clean, dry air. The use of an air drier, separator, or minimally an air filter, is advantageous. See page 56 for our selection of air regulators, separators (filter) and dryers.

www.liquidynamics.com

5

PNEUMATIC OIL PUMPS

6

Part Number

(w/o Bung Adapter)

Part Number

(w/ Bung Adapter)

Ratio

Flow Rate @ 90 PSI (GPM)

Maximum Air Pressure (PSI)

Air Inlet Size

Fluid Inlet Size

Fluid Outlet Size

Noise

Air Consumption (cfm)

Suction Tube Diameter

Suction Tube Length

Fits Drum Sizes (Gal.)

Shipping Weight, lbs.

21100T

21100T-S2

5:1

5

21073T

21073T-S2

5:1

5

21094T

21094T-S2

5:1

5

21200

21200-S1

5:1

8

21300

21300-S1

5:1

11

21400

21400-S2

8:1

5.5

21500

21500-S2

13:1

4.0

120 120 120 120 120 120 120

1/4” NPT 1/4” NPT 1/4” NPT 3/8” NPT 3/8” NPT 3/8” NPT 3/8” NPT

1” NPT 1 1 ⁄

2

” NPT 1 1 ⁄

2

” NPT 1” NPT 1” NPT

1/2” NPTF 1/2” NPTF 1/2” NPTF 3/4” NPTF 3/4” NPTF 3/4” NPTF 3/4” NPTF

79 db

12

1.65”

11”

Universal

12

79 db

12

1.65”

29”

16/30

14

79 db

12

1.65”

37”

55

16

79 db

18

2”

15”

79 db

21

2”

17”

79 db

21

2”

11”

79 db

22

2”

11”

Universal Universal Universal Universal

19 21 22 24

Note: For longer pump life and efficiency, we recommend the use of dried air or an air filter. As with any pneumatic equipment, you can expect longer trouble free operation with the use of clean, dry air. The use of an air drier, separator, or minimally an air filter, is advantageous. See page 53 for our selection of air regulators, separators (filter) and dryers.

800.894.3572

PNEUMATIC OIL PUMP ACCESSORIES

P/N

32091-S1

1:1

P/N

20001T-S2

3:1

P/N

21100T-S2

5:1

Modular

Suction Tubes

For 1:1, 3:1 and 5:1 Pumps

(Note: Will not fit 21200 &

21300 High Volume Pumps, unless pump inlet is reduced to 1”.)

P/N

22255T-08

Length 8”

P/N

22255T-16

Length 16”

P/N

22255T-24

Length 24”

P/N

22255T-35

Length 35”

1/4”

1/4”

P/N

22268

Connector, male/male, pump to modular tubes and modular tube to 1” foot valve.

P/N

22254

Connector, male/male for modular tube to modular tube.

P/N

950002

1” NPTF foot valve

P/N

950047

1 1 ⁄

2

” NPTF foot valve

22268

1/4”

22255T-08

22268

950002

1/4”

1/4”

NOTE: 16 gallon drum depth 27”

30 gallon drum depth 29”

55 gallon drum depth 35”

22268

1/4”

22255T-16

22254

22255T-08

22268

950002

1/4” www.liquidynamics.com

22268

22255T-35

7

PNEUMATIC OIL PUMP ACCESSORIES

P/N

21200-S1

5:1, 8 GPM

P/N

21300-S1

5:1, 12 GPM

P/N

21400-S1

8:1, 5.5 GPM

P/N

21500-S1

13:1, 4 GPM

8

1/4”

1/4”

900365-0B

22268

22255T-24

22268

950002

Note: Use P/N 900365-B reducer bushing when using modular tubes with

P/N 21200 and 21300 pumps.

OR

Use 1 1 ⁄

2

” pipe cut to your required length.

P/N

900365-B

1 1 ⁄

2

” NPTM x 1” NPTF

Reducer Bushing to allow use of modular tubes with

21200 and 21300 pumps.

Will fit through 2” bung adapter where normal reducer bushing will not.

950047

PVC Extension Pipes

Specify length in inches

(e.g.; 901020A-16 designates a 1” PVC pipe 16” long.)

P/N

901020A-XX

1” PVC Pipe, Sch 80, Threaded

P/N

901020A-XXA

1” PVC Pipe, w/ 45° end, Sch 80

P/N

901021A-XX

1

1

2

” PVC Pipe, Sch 80, Threaded

P/N

901019A-XX

1

1

2

” PVC Pipe, w/ 45° end, Sch 80

P/N 950065 shown

P/N

950065

Suction tube kit to fit 55 gal. drum includes 35” suction tube, foot valve, bung adapter, 90 degree elbow and 1”x 6’ suction hose.

P/N

950064

Suction tube kit, 44” deep to fit 275 gallon oval tanks and totes.

800.894.3572

PNEUMATIC OIL PUMP KITS

P/N

32097-S1

• 32091, 1:1 Stub Pump

• 22157, Heavy Duty Bung Adapter

• 23104, Spigot

P/N

32099-S2

• 32095, 1:1 Drum Pump

• 22157, Heavy Duty Bung Adapter

• 23104, Spigot

• 23103, Support Shelf

P/N

32099-S1

• 32095, 1:1 Drum Pump

• 22157, Heavy Duty Bung Adapter

• 23104, Spigot

(Drum and measure not included)

P/N

23103

Support/Drip Tray for use with 1:1 Pumps

Models 32091 & 32095

P/N

23104

Self-closing Spigot with connecting elbow for use with 1:1 Pumps.

STAINLESS STEEL AIR OPERATED PUMPS

Designed for use with windshield washer fluid and pre-mix antifreeze. These pumps are available in two different lengths and pumping ratios to fit most any application as noted below. Bung adapter included.

P/N

32091SS

1:1 pumps are recommended for pumping distances of approximately 100 ft or less. This universal pump may be wall mounted or adapted to fit most any tank depth by the simple addition of an appropriate length suction pipe and foot valve, 3/4” NPTM inlet.

P/N

32095SS

This 1:1 pump is designed specifically to fit

55 gallon drums and requires no further modification. It is recommended for pumping distances of 100 ft. or less.

P/N

20001TSS

3:1 pumps are recommended for pumping distances greater than 150 ft. This universal pump may be wall mounted or adapted to fit most any tank depth by the simple addition of an appropriate length suction pipe and foot valve, 3/4” NPTM inlet.

P/N

20094TSS

This 3:1 pump is designed specifically to fit

55 gallon drums and requires no further modification. It is recommended for pumping distances of 150 ft. or greater.

www.liquidynamics.com

9

DOUBLE DIAPHRAGM PUMPS

P/N

20011-Y

1/4” Double Diaphragm Pump with polypropylene body, PTFE diaphragm and seals. Pump is rated at 3.4 GPM maximum flow rate at 100 PSI air supply pressure. Maximum dry suction lift of 5 ft. and maximum discharge distance of 180 ft. (with reduced flow). Suitable for use with windshield washer fluids, antifreeze and other fluids compatible with the materials of construction. Maximum fluid temperature 180° F. Note: Pump will bypass small amount of air when in the stalled condition.

P/N

20025-V

3/8” Double Diaphragm Pump is very compact but has a flow rate exceeding 6 GPM at 100

PSI air pressure input. Has polypropylene body and valve seats with Santoprene or Geolast diaphragm. Can pass a maximum particle size of 0.10”. Fluid inlet and outlet are 3/8” NPTF and has 1/4” NPTF air inlet. Maximum air pressure is 100 PSI.

P/N

20012-V

1/2” Double Diaphragm Pump with polypropylene body, Buna-N diaphragm and seals. Pump is rated at 15 GPM at 100 PSI air supply, dry lift capacity of 8 ft. and maximum discharge distance of

180 ft. (with reduced flow). Suitable for use with antifreeze, fresh and used oil. Maximum fluid temperature 180° F.

P/N

20012-Y2

Same as 20012-V above except pump uses a dual inlet to allow mixing of fluids at 50:50 ratio.

Typically used to mix antifreeze and water.

P/N

20015-Y

3/4” Double Diaphragm Pump with aluminum body, Buna N diaphragm and seals. Pump is rated at 27 GPM at 100 PSI air supply, dry lift capacity of 18 ft. and discharge distance of 180 ft. (with reduced flow). Typically used with fresh and used oil. Maximum fluid temperature 180° F.

P/N

20015-Y2

Same as 20015-Y above except it uses a dual inlet to allow mixing of fluids at 50:50 ratio.

Typically used to mix antifreeze and water.

P/N

20016-Y

Same as 20015-Y except is UL listed for use with diesel fuel.

P/N

20015-YV

3/4” D.D. Pump w/ vertical manifold allows mounting of pump directly onto tank or drum. Has 1” NPTF inlet fitting. See P/N 950027 on page 107 for complete pump kit to fit 55 gallon drum or 275 gallon oval tank.

P/N

20013-Y

1” Double Diaphragm Pump with aluminum body, Buna N diaphragm and seals. Pump is rated at 48 GPM at 100 PSI, dry lift capacity of 18 ft. and discharge distance of 180 ft. (with reduced flow). Typically used with fresh and used oil. Maximum fluid temperature 180° F.

P/N

20013-Y2

Same as 20013-Y except pump is fitted with a dual inlet to allow mixing of fluids at 50:50 ratio. Typically used to mix antifreeze and water.

P/N

20017-Y

Same as 20013-Y except pump is UL listed for use with diesel fuel.

10

800.894.3572

DOUBLE DIAPHRAGM PUMP KITS

P/N

950003

1/2” Double Diaphragm Pump Kit; includes model 20012-V pump, 950020 mounting bracket, 81200-06, 6’ suction hose, 81200-06, 6’ discharge hose,

540201-G air filter/regulator with gauge, 81100-06, 6’ air hose, 900256 air coupler set and appropriate fittings for connection of components.

P/N

950049

3/4” Double Diaphragm Pump Kit; includes model 20015-Y pump, 950020 mounting bracket, 81250-06, 6’ suction hose,

81250-06, 6’ discharge hose, 540015-G filter/regulator with gauge, 81100-06, 6’ air hose, 900256 air coupler set and appropriate fittings for connection of components.

P/N

950051

1” Double Diaphragm Pump Kit; includes model 20013-Y pump, 950020 mounting bracket, 81260-06, 6’ suction hose, 81260-06, 6’ discharge hose,

540204-G filter/regulator with gauge, 81125-06 6’ air hose.

P/N 950049 shown

P/N

950022-55

Convenient kit for use with 55 gallon drums, has 2” male NPT threads to fit drum and tank bungs. Includes 1/2” double diaphragm pump, mounting bracket, hardware, 35” long suction tube and 1/4” air filter/regulator. A 3/8” return port is included in the bung to allow use with a thermal relief valve if desired.

P/N

950022-16

Same as 950022-55 above except has 27” long suction pipe to fit 16 gallon drums

P/N 950022-55 shown

P/N

950022-275

Same as 950022-55 above except has 44” long suction pipe to fit 275 gallon oval tanks and IBC tote tanks.

P/N

950027-55

3/4” D.D. pump w/vertical inlet manifold kit to fit 55 gallon drum. Kit includes

“close” nipple and double tap with 3/8” return port for use with thermal expansion valve kit.

P/N

950027-275

3/4” D.D. pump w/vertical inlet manifold to fit 275 gallon tank. Has 44” long suction pipe,

“close” nipple and double tap with 3/8” return port for use with thermal expansion valve kit.

Schedule 80 PVC suction pipe can easily be trimmed to fit shorter tank depths

DOUBLE DIAPHRAGM MOUNTING BRACKETS

P/N

950019

Wall Mounting Bracket for 1/4” Double Diaphragm Pumps.

P/N

950020

Wall Mounting Bracket for 1/2”, 3/4” and 1” Double Diaphragm Pumps.

DRY BREAK DISCONNECT

P/N

900290

Female 1/2” Dry Break Coupler

P/N

900291

Male 1/2” Dry Break Nipple

P/N

900294

Female 3/4” Dry Break Coupler

P/N

900295

Male 3/4” Dry Break Nipple

P/N

900292

Female 1” Dry Break Coupler

P/N

900293

Male 1” Dry Break Nipple

P/N 900291

(Shown)

P/N 950020 shown

P / N

900325

Polypropylene “T” Strainer,

100 mesh (150 micron), 3/4” NPTF

P / N

900351

Polypropylene “T” Strainer,

60 mesh, 1” NPTF www.liquidynamics.com

11

ELECTRIC OIL PUMPS

The Liquidynamics family of Electric Oil Pumps are designed to provide an effective alternative solution to pumping viscous fluids such as engine and gear oil, as well as non-viscous fluids such as hydraulic fluid, transmission fluid and 100% (nonmixed) antifreeze. Pumps are intended for indoor use only.

Available models include the ability to operate “on demand” when the discharge valve is opened and then shut-off automatically when the discharge valve is closed.

Advantages to using Electric Oil Pump includes; air compressor not being required, quiet operation, non-pulsating flow for improved metering accuracy and reduced maintenance. Please contact Liquidynamics to ensure correct pump choice for your specific application. Variables to consider when choosing an electric pump include fluid viscosity, fluid temperature, plumbing length, plumbing diameter, suction distance and any pertinent restrictions such as hose reels, control valves, elbows, etc.

P/N 33221 shown

P/N 33250 shown

P/N

33221

A great choice for use in transfer of medium and high viscosity fluids up to

2,000 centistoke. Maximum discharge pressure of 170 PSI with full bypass at

240 PSI. Uses specially designed steel gears for efficient and quiet transfer of fluids such as engine oils, gear oils, etc. Manual on/off switch integrated into electrical connection box.

P/N

33222

Same design as P/N 33221 but utilizes a 2.0 HP motor for additional pressure and flow rate capability. Will pump up to 4.0 GPM with pressure up to 325

PSI and is rated for continuous operation. For use with fluids up to

2,000 centistoke.

P/N

33250

This high flow pump has an adjustable bypass for pressures up to 80 PSI and is ideal for transferring larger quantities of light oils, hydraulic and transmission fluids, 100% antifreeze and similar fluids over short distances.

Manual on/off switch, 115 VAC motor with short extension cord and plug for easy connection.

Part Number Description

33221

33222

33250

560083

560084

560085

560086

2.5 GPM, 170 PSI Max, Manual Shut-off

4.0 GPM, 230 PSI Max, Manual Shut-off

7.0 GPM, 90 PSI Max, Manual Shut-off

4.5 GPM, 200 PSI Max, Manual Shut-off

9.0 GPM, 200 PSI Max, Manual Shut-off

2.5 GPM, 450 PSI Max, Auto Shut-off

2.5 GPM, 650 PSI Max, Auto Shut-off

P by-pass Amps HP Shipping Weight

240

325

80

200

200

450

650

15

13

13

12

18

12

16

1.2

2.0

1.6

1.0

2.0

1.0

1.5

33 lbs.

44 lbs.

34 lbs.

60 lbs.

65 lbs.

63 lbs.

71 lbs.

Inlet Discharge

Dimensions Dimensions

3/4”

3/4”

3/4”

1”

1”

1”

1”

3/4”

3/4”

3/4”

3/4”

3/4”

3/4”

3/4”

12

800.894.3572

ELECTRIC MEDIUM PRESSURE OIL TRANSFER PUMPS

These electric oil pumps are available in manual “on/off” and “on-demand” versions and are intended for use with hydraulic fluid, transmission fluid, light and medium weight engine oil and 100% antifreeze. The housing is constructed of heavy duty cast iron for durability and are self priming. A unique “quick-detach” coupler provides easy mounting and transfer ability on tanks, carts and barrels, while its center balance design reduces stress on mounting hardware. A fine mesh inlet screen protects pump components from damage and is easily accessed for cleaning without having to remove the pump.

MANUAL ON / MANUAL OFF

P/N

560083

4.5 GPM, 1 HP, 115 VAC, 12 amp Transfer Pump has a maximum discharge pressure of 200 PSI which is suitable for pumping light and medium viscosity lubricants, ATF and hydraulic fluids up to approximately 100’. Pump has manual on/off switch and internal bypass with 1” NPTF inlet and 3/4”

NPTF discharge.

P/N

560084

9 GPM, 2 HP, 115 VAC, 18 amp Transfer Pump with 200 PSI discharge pressure capability is designed to transfer large quantities of light to medium viscosity lubricants, ATF and hydraulic fluids. Pump has manual on/off switch and internal bypass with 1” NPTF inlet and 3/4” NPTF discharge.

P/N 560083 shown

AUTOMATIC ON/OFF ELECTRIC (ON DEMAND)

P/N

560085

2.5 GPM, 1 HP, 12 amp, 115 VAC auto on/off Oil Supply

Pump will generate 450 PSI of discharge pressure and will therefore operate similarly to a 3:1 air operated pump.

Pump inlet is 1” NPTF, discharge is 3/4” NPTF and has a built in bypass valve and thermal relief valve to prevent pump overload.

P/N

560086

2.5 GPM, 1 1 ⁄

2

HP, 16 amp, 115 VAC auto on/off Oil Supply

Pump will generate 650 PSI of discharge pressure and will therefore operate similarly to a 5:1 air operated pump.

Pump inlet is 1” NPTF, discharge is 3/4” NPTF and has a built in bypass valve and thermal relief valve to prevent pump overload.

P/N 560085 shown www.liquidynamics.com

13

ELECTRIC OIL PUMPS WITH SPIGOT – 115 VAC

These 115 VAC Electric Spigot Pumps provide a continuous, smooth stream of fluid and eliminate the pulsations and splashing created by air operated piston or diaphragm pumps. Applications include dispensing of motor oil, gear oil, cutting oil, ATF, hydraulic fluid, 100% antifreeze and similar fluids. These pumps may be mounted vertically on a 55 gallon drum or horizontally on a tank or wall bracket.

P/N

33221-S1

Versatile horizontal mount system has excellent priming capability. Ideal for use with deep tanks and wall mount systems. Inlet fitting is 3/4” NPTF.

P/N

33221-S3

Vertical mount system includes 3.0 GPM electric pump, spigot, 2” double tap, 1”x30” suction pipe and foot valve.

Ideal for use with 55 gallon drums and bench tanks.

LOW PRESSURE OIL TRANSFER KITS

P/N

560081

4.5 GPM, 1/3 HP, 115 VAC, 5.2 amp Transfer Pump has maximum 50 PSI discharge pressure. This pump kit is ideal for transferring from 55 gallon drums. Pump has an internal bypass, manual on/off switch and 1” NPTF inlet, 3/4” discharge.

P/N

560082

9 GPM, 1 HP, 115 VAC, 12 amp Transfer Pump with a maximum 50 PSI discharge pressure is ideal for transferring larger quantities of light to medium viscosity lubricants, ATF and hydraulic fluids.

P/N 560081 shown

P/N

560080

4.5 GPM, 1/2 HP, 12 VDC, 39 amp Transfer Pump also has a maximum discharge pressure of 50 PSI and is intended for use in portable applications where 115 VAC is not available. Pump has manual on/off switch and internal bypass with 1” NPTF inlet and 3/4” NPTF discharge.

ACCESSORIES INCLUDED

With 560080, 560081, 560082 shown above.

3/4” x 8’ Discharge Hose

1” Threaded

Suction Pipe

14

Manual Fuel Nozzle

800.894.3572

P/N

20001-S7

Wall mounted pump kit to fit 55 gallon drums (37” suction tube)

Includes:

• P/N 20001T, 3:1 Stub Pump

• P/N 22242, Wall Bracket

• P/N 950065, Suction Kit

• P/N 540201-G, 1/4”

Air Filter/Regulator

P/N

21100-S7

Same as 20001-S7 above except uses

21100T, 5:1 stub pump

P/N

32091-S7

Same as 20001-S7 above except uses

32091, 1:1 stub pump

WALL MOUNT PUMP KITS

P/N

20094-S9

Wall mounted pump kit with direct mount for 55 gallon drum

Includes:

• P/N 20094T, 3:1 Drum Pump

• P/N 22157, Heavy Duty Bung Adapter

• P/N 100600-RA, Electronic Digital Oil Meter

• P/N 42015, Drip Tray

• P/N 81200-06, 1/2” x 6' Connecting Hose

• P/N 43003-30L, 1/2” x 30' Hose Reel

• P/N 540201-G, 1/4” Air Filter/Regulator

P/N

21094-S9

Same as 20094-S9 above, except uses

21094T, 5:1 drum pump

P/N

20001-S8

Wall mounted pump kit to fit 55 gallon drums (37” suction tube)

Includes:

• P/N 20001T, 3:1 Stub Pump

• P/N 22242, Wall Bracket

• P/N 950065, Suction Kit

• P/N 43003-30L, 1/2” x 30' Hose Reel

• P/N 81200-06, 1/2' x 6'

Connecting Hose

• P/N 42015, Drip Tray

• P/N 100600-RA, Electronic Digital

Oil Meter

• P/N 540201-G, 1/4” Air

Filter/Regulator

P/N

21100-S8

Same as 20001-S8 above, except uses

21100T, 5:1 stub pump www.liquidynamics.com

P/N

20094T-S4

3:1 pump kit to fit 275 gallon oval tank, has 44” long suction tube w/ foot valve

P/N

21094T-S4

5:1 pump kit to fit 275 gallon oval tank, has 44” long suction tube w/foot valve

15

OIL REEL SYSTEM SELECTION GUIDE

The selection guide below allows you to customize the pump/reel/meter system to best fit your application and allows you to take advantage of “system” pricing.

The selection guide steps you through the selection process with the end result being a unique model number detailing your system configuration. Model RS25R25ENQRAFR2 is shown below. It includes a 5:1 stub pump, foot valve, 25 foot hose reel w/

2 foot jumper hose, electronic meter with quart calibration, rigid spout, auto-tip and a 150 PSI rated filter/regulator with gauge.

Note: Optional items that you may need to complete your system: P/N 540025 Relief Valve Kit, 750 PSI

P/N 540035 2” Double Tap with 3/8” Return Port

P/N 22159 2” Bung Spacer with 3/8” Return Port

Note: If you will be plumbing any of these systems with hard, rigid pipe, it is highly recommended to install a relief valve kit, model #540025. When using a stub pump, use relief valve kit #540025 in conjunction with 2” double tap

#540035, or bung spacer #22159, for convenient return of

“relieved” fluid. See page 25.

SYSTEM IDENTIFIER

RS25R25ENQRAFR2 shown

RS Oil Transfer System

PUMP SELECTION

20 3:1 Stub Pump w/bung adapter

21 3:1 Drum Pump to fit 55 Gallon drum, w/bung adapter

22 3:1 Pump Kit to fit 275 Gallon Oval Tank, 44” length, w/bung adapter

23 5:1 High Flow Stub Pump, 12 GPM

24 5:1 High Flow Stub Pump, 8 GPM

25 5:1 Stub Pump w/ bung adapter

26 5:1 Drum Pump to fit 55 Gallon drum, w/bung adapter

27 5:1 Pump Kit to fit 275 Gallon Oval Tank, 44” length, w/bung adapter

REEL SELECTION

H20 1/2” x 20’ Hose Only

R25 1/2” x 25’ Hose Reel

R30 1/2” x 30’ Hose Reel

R40 1/2” x 40’ Hose Reel

R50 1/2” x 50’ Hose Reel

METER SELECTION

VN Control Valve w/o Meter, VN200 Series

EN Electronic Non-Preset Meter, LD150 Series

EB Electronic Non-Preset Meter, LB300 Series

EP Electronic Preset Meter, K500 Series

ES Standard Model Electronic Preset Meter, BP100 Series

MN Mechanical Non-Preset Meter

MP Mechanical Preset Meter

G

P

TYPE OF CALIBRATION

X Not Applicable

Q Quart Calibration

Gallon Calibration

Pint Calibration

TYPE OF DISCHARGE SPOUT

R Rigid

F

H

Flex

Hose, 12”

TYPE OF DISCHARGE TIP

A Automatic

M

H

Manual

High Flow Manual

AIR FILTER/REGULATOR/LUBRICATOR W/GAUGE

xxx No Filter/Regulator

FR1 FRL Combo, 150 PSI

FR2 FR COMBO, 150 PSI

FR3 FRL COMBO, 230 PSI

FR4 FR COMBO, 230 PSI

RS 25 R25 EN Q R A FR2

Example: Transfer system w/ 5:1 pump, 25’ Hose Reel, non-preset electronic meter w/quart calibration, rigid spout, automatic discharge tip and filter regulator combo w/gauge.

NOTE: For pricing see back section of price booklet.

16

800.894.3572

TANK SYSTEMS

The “system selection guide” may be used to customize your tank systems, which are completely assembled at the factory and ready for introduction of product and air or electric power supply.

All tank systems include the following components to ensure that your system is ready for use:

• Your choice of tank

• Your choice of pump, 1:1, 3:1, 5:1 or 115 VAC Electric (3:1 pump standard)

• 2” bung adapter (allows easy adjustment of pump height)

• Suction pipe with foot valve

• Air filter/regulator (not supplied w/electric pump)

• Your choice of meter and control handle (100600-RA standard)

• Your choice of hose reel length (1/2” x 25’ standard)

• 1/2” x 2’ oil jumper hose

• 3/8” x 6’ air jumper hose (not supplied w/electric pump)

• 1/4” air quick coupler (not supplied w/electric pump)

• Tank level gauge

• Vented fill cap (lockable)

Systems are skid mounted (oval tanks) and protected by a heavy carton to allow easy handling and to ensure the system arrives at the customers location in excellent condition.

Model TS20R40ENQRATI shown

Model TS21R25ENQRAB2 shown

Model TS60R40EPXRAB2 shown

1:1 SPIGOT PUMP TANK SYSTEMS

Model

32093-S21

32093-S22

32093-S23

Tank Capacity

165 Gallon

225 Gallon

280 Gallon

Tank Dimensions

36” L x 33” D x 33” W

48” L x 33” D x 33” W

60” L x 33” D x 33” W

Systems Include: • Tank specified above

• 32099-S1 1:1 Pump

• 901054 Vent/Fill Cap (lockable)

• 901057 Tank Level Gauge

• 540201-G Air Filter/Regulator w/gauge

• 23104 Self Closing Spigot www.liquidynamics.com

17

BULK OIL TANK SYSTEM SELECTION GUIDE

SYSTEM IDENTIFIER

TS Tank System

PUMP SELECTION

12 1:1 Pump, 5 GPM – without spigot

20 3:1 Pump, 5 GPM

21 5:1 Pump, 5 GPM

22 5:1 Pump, 8 GPM

23 5:1 Pump, 12 GPM

60 Elec. Auto Pump, 2.5 GPM, 450 psi (115 VAC)

61 Elec. Auto Pump, 2.5 GPM, 650 psi (115 VAC)

REEL SELECTION

H20 1/2” x 20’ Hose Only

R25 1/2” x 25’ Hose Reel

R30 1/2” x 30’ Hose Reel

R40 1/2” x 40’ Hose Reel

R50 1/2” x 50’ Hose Reel

Model TS21R50ESQRAT3 shown

METER SELECTION

VN Control Valve w/o Meter, VN200 Series

EN Electronic Non-Preset Meter, LD150 Series

EB Electronic Non-Preset Meter, LB300 Series

EP Electronic Preset Meter, K500 Series

ES Standard Model Electronic Preset Meter, BP100 Series

MN Mechanical Non-Preset Meter

MP Mechanical Preset Meter

Q

G

TYPE OF CALIBRATION

X Not Applicable

P

Quart Calibration

Gallon Calibration

Pint Calibration

TYPE OF DISCHARGE SPOUT

R Rigid

F

H

Flex

Hose, 12”

TYPE OF DISCHARGE TIP

A Automatic

M

H

Manual

High Flow Manual

TANK SELECTION

T1 275 Gallon Oval

60” L x 27” D x 52” H

T2 330 Gallon Oval 72” L x 27” D x 52” H

T3 275 Gallon Oval Vertical 52” L x 27” D x 60” H

B1 165 Gallon Bench 36” L x 33” D x 39” H

B2 225 Gallon Bench 48” L x 33” D x 39” H

B3 280 Gallon Bench 60” L x 33” D x 39” H

C3 336 Gallon Tower 36” L x 36” D x 64” H

R3 300 Gallon Round 37.75” Dia. x 62”

R4 300 Gallon Round UL Listed 38” Dia. x 60”

R6 500 Gallon Round UL Listed 46” Dia. x 71.5”

TS 20 R25 EN Q R A T1

Example: Tank system w/3:1 pump, 25’ reel, electronic meter w/quart cal., rigid spout, auto non drip tip and 275 gallon oval tank. System comes complete with foot valve, 2” bung adapter, air filter/regulator, air coupler set, 1/2” x 2’ oil connection hose, 3/8” x 6’ air connection hose, tank gauge, vented fill cap.

NOTE: For pricing see back section of price booklet.

18

800.894.3572

The Tote System is a convenient method of mounting transfer equipment onto IBC tote tanks. Steel mounting plate supports weight of pump, reel and meter, preventing damage to tank. Basic mounting plate kit is 40” wide and is provided with a versatile hold down bracket to fit most commonly used IBC tote tanks such as

Clawson, Hoover and Greif.

Optional bulkhead fitting and vent cap kit allows equipment to be left in place while providing tank venting and refilling access.

By using the convenient selection guide provided, you can easily customize your system to fit your particular application.

TOTE SYSTEMS

Note: Tote tank not included.

P/N

950026

IBC Tote Mounting Plate Hardware Kit, includes all hardware to attach mounting plate to tote tank and allow mounting of pneumatic pump, hose reel and discharge valve/meter. Fits most standard IBC tote tanks w/40” wide frame.

BULKHEAD FITTING

& VENT KIT:

P/N

900352

Includes Bulkhead Fitting,

Buna N Gasket & Vent with Screen

P/N

901071

275 Gallon IBC Tote Tank with galvanized steel tubing frame.

UV stabilized, high density polyethelene blow molded tank.

May be stacked up to three high. Four way fork lift access.

Dimensions are 48”W x 40”D x 46”H. Six inch lid has a 2”

NPTF opening and 2” discharge valve at bottom. Shipping weight, 145 lbs.

BULKHEAD FITTING FEATURES:

• 2” Bulkhead Fitting (3” hole size)

• Glass reinforced polypropylene

• Nitrile Gasket (EPDM optional)

P/N

900236

Bulkhead Fitting (comes standard with Buna N Gasket)

P/N

900348

EPDM Bulkhead Gasket

P/N

900349

Buna N Bulkhead Gasket

VENT CAP FEATURES:

• 2” Male NPT

• Glass reinforced polypropylene

• 304 Stainless Steel Screen

P/N

900289-S

Vent w/Screen www.liquidynamics.com

19

IBC OIL TANK SYSTEM SELECTION GUIDE

SYSTEM IDENTIFIER

TO Tote System

*

PUMP SELECTION

10 1:1 Pump Kit to fit 44” deep Tote Tank, w/Bung Adapter

22 3:1 Pump Kit to fit 44” deep Tote Tank, w/Bung Adapter

27 5:1 Pump Kit to fit 44” deep Tote Tank, w/Bung Adapter

60 Electric Auto Pump, 2.5 GPM, 450 PSI

61 Electric Auto Pump, 2.5 GPM, 650 PSI

REEL SELECTION

H20 1/2” x 20’ Hose Only

R25 1/2” x 25’ Hose Reel

R30 1/2” x 30’ Hose Reel

R40 1/2” x 40’ Hose Reel

R50 1/2” x 50’ Hose Reel

METER SELECTION

VN Control Valve w/o Meter, VN200 Series

EN Electronic Non-Preset Meter, LD150 Series

EB Electronic Non-Preset Meter, LB300 Series

EP Electronic Preset Meter, K500 Series

ES Standard Model Electronic Preset Meter, BP100 Series

MN Mechanical Non-Preset Meter

MP Mechanical Preset Meter

Model TO27R50ENQRAFR2 shown

Q

G

TYPE OF CALIBRATION

X Not Applicable

P

Quart Calibration

Gallon Calibration

Pint Calibration

TYPE OF DISCHARGE SPOUT

R Rigid

F

H

Flex

Hose, 12”

TYPE OF DISCHARGE TIP

A Automatic

M

H

Manual

High Flow Manual

AIR FILTER/REGULATOR/LUBRICATOR W/GAUGE

XXX No Filter/Regulator

FR1 FRL Combo, 150 PSI

FR2 FR Combo, 150 PSI

FR3 FRL Combo, 230 PSI

FR4 FR Combo, 230 PSI

TO 27 R25 EN Q R A FR2

Note: All systems above include mounting bracket and hardware to support pump, reel and discharge valve/meter as shown. Bulkhead fitting, vent and tote tank must be ordered seperately.

*Tote tank not included.

NOTE: For pricing see back section of price booklet.

20

800.894.3572

POLY-TANK GRAVITY FLOW SYSTEMS

Poly-Tank Systems are a compact, convenient and inexpensive solution for storing and dispensing multiple fluids. High density, UL rated, food grade polyethylene is used to rotationally mold these sturdy tanks. Their unique corrugated V-groove side walls are engineered for superior strength and the patented 61⁄2” cut out area in the bottom corner allows easy filling when stacked.

The see-through plastic allows you to see fluid levels at all times, thus eliminating the need for a separate level gauge. There is no guessing on volumes, all tanks have gauges embedded in the plastic, therefore eliminating product run-outs and down time.

Stackable tanks have unique top outer grooves that interlock with bottom inner grooves to secure tanks in place when stacked. These tanks are easy to set up and are user friendly.

Poly Tanks

P/N

901090T-35

35 Gallon Poly Tank, 32” square x 10” H

2 ea. 2” NPTF openings, stackable up to four high

P/N

901090T-70

70 Gallon Poly Tank, 32” square x 20” H

2 ea. 2” NPTF openings, stackable up to three high

P/N

901090T-120

120 Gallon Tank, 32” square x 32” H

2 ea 2” NPTF openings, stackable up to two high

P/N

901090T-180

180 Gallon Tank, 42” square x 32”H

2 ea. 2” NPTF openings, stackable up to two high

P/N

901090T-240

240 Gallon Tank, 42” square x 42” H

2 ea. 2” NPTF openings, stackable up to two high

Note: Order steel converting bracket P/N 901097 T when stacking 32” square tank on top of 42” square tank.

www.liquidynamics.com

Accessories for Poly Tanks

P/N 900521 Brass Spring Release Valve for Poly Tanks

P/N 901096T-A Steel Stand for stacking 32” sq. tanks

P/N 901096T-C Steel Stand for stacking 42” sq. tanks

P/N 901097T Steel Converting Bracket, 32” tanks on top of 42” tanks

P/N 901098T-A Steel Drip Tray Holder, 3 pans & screens for 32” sq. tanks

P/N 901098T-B Steel Drip Tray Holder, 2 pans & screens for 42” sq. tanks

P/N 900524 1” Elbow with Mounting Stud

P/N 950013 Gravity Flow Kit for Stacked Poly Tanks (Plastic fittings, hose and clamps). Order 1 kit for each stacked tank.

21

POLY TANK EQUIPMENT PACKAGES

Wall Mount Packages

Tank Packages Include:

• Your choice of 35, 70, 120,

180 or 240 gallon tank

• Heavy duty tank stand

• 3:1 air operated pump

• 1/2” x 25’ hose reel

• Electronic meter and control handle

• Air filter/regulator

• 1” x 6’ connecting hose from tank to pump

• 1/2” x 6’ connecting hose from pump to hose reel

• Wall mounting bracket for pump

• Drip tray

P/N

62102-35

(35 GALLON TANK)

P/N

62102-70

(70 GALLON TANK)

P/N

62102-120

(120 GALLON TANK)

P/N

62102-180

(180 GALLON TANK)

P/N

62102-240

(240 GALLON TANK)

Tank Mount Packages

Tank Packages Include:

• Your choice of 35, 70, 120, 180 or 240 gallon tank

• Heavy duty tank stand

• 3:1 air operated pump

• 1/2” x 25’ hose reel

• Electronic meter and control handle

• Air filter/regulator

• 1/2” x 6’ connecting hose from pump to hose reel

• Drip tray

P/N

62101-35

(35 GALLON TANK)

P/N

62101-70

(70 GALLON TANK)

P/N

62101-120

(120 GALLON TANK)

P/N

62101-180

(180 GALLON TANK)

P/N

62101-240

(240 GALLON TANK)

22

P/N

20025-S1

3/8” double diaphragm pump kit includes pump,

1/2” x 3’ suction hose, 1/2” x 15’ discharge hose, electronic digital meter w/rigid spout, manual tip and air filter/regulator.

800.894.3572

POLY-TANK SYSTEM SELECTION GUIDE

Note: These systems do not include tank or tank stand.

SYSTEM IDENTIFIER

PTS

PWS

35G

70G

Poly-Tank Tank Mount Equipment Package

Poly-Tank Wall Mount Equipment Package

35 Gallon Poly Tank Pump System

70 Gallon Poly Tank Pump System

120G

180G

240G

120 Gallon Poly Tank Pump System

180 Gallon Poly Tank Pump System

240 Gallon Poly Tank Pump System

PUMP SELECTION

31 1:1 Pump w/Bung Adapter

33

35

3:1 Pump w/Bung Adapter

5:1 Pump w/Bung Adapter

HOSE/REEL SELECTION

H12 1/2” x 12’ Oil Hose

H15 1/2” x 15’ Oil Hose

R25 1/2” x 25’ Oil Hose Reel

R30 1/2” x 30’ Oil Hose Reel

R40 1/2” x 40’ Oil Hose Reel

R50 1/2” x 50’ Oil Hose Reel

R75 1/2” x 75’ Oil Hose Reel

METER SELECTION

VN Control Valve w/o Meter

EN Electronic Non-Preset Meter, LD150

ES Standard Electronic Preset Meter, BP100S

TYPE OF DISCHARGE SPOUT

R Rigid

F Flex

TYPE OF DISCHARGE TIP

A Automatic

M Manual

AIR FILTER/REGULATOR W/GAUGE

FR2 Air F/R combo, 150 PSI

FR4 Air F/R combo, 230 PSI

PTS 120G 33 R25 EN R A FR2

Example: Poly-Tank System, PTS120G33R25ENRAFR2 as shown above is a tank mount equipment package including a 3:1 pump sized to fit a 120 gallon poly tank, 2” bung adapter, air filter/regulator, 25’ hose reel, 1/2” x 6’ connection hose, electronic digital meter with rigid spout & automatic tip and wall mounted drip tray. NOTE: POLY TANK AND SUPPORT STAND

MUST BE ORDERED SEPERATELY

NOTE: For pricing see back section of price booklet.

www.liquidynamics.com

23

OIL BAR

Oil bars are ideal for quick and easy dispensing of fluids such as engine oils, gear oils or antifreeze. You may choose one, two or three taps and metering capability.

Each module is supplied with one tap, meter display covers and removable oil drip tray. A drain tube may be easily installed for permanent drain capability.

27”

27”

17

1

2

13”

P/N

23101

Oil Bar with two dispense point capability. Supplied standard with one tap.

17

1

2

18”

P/N

23102

Oil Bar with three dispense point capability. Supplied standard with one tap.

P/N

950111

Electronic Digital Meter kit for Oil Bars

P/N 23101 and 23102, uses two AAA alkaline batteries.

P/N

23105

Automatic Tap for oil and antifreeze, complete with fittings shown, 1/2” NPTF fitting.

P/N

23105A

Same as 23105 except with Viton Seals for use with windshield washer fluid, 1/2” NPTF fitting.

P/N

950112

Same as above except uses meter P/N

530020, uses long life lithium batteries.

24

800.894.3572

2” Double Tap

Duplex Bushing:

P/N

P/N

540038

2” x 1” x 1”

540039

1 1 ⁄

2

” x 1” x 1”

OIL PUMP ACCESSORIES

P/N

22159

Bung Spacer, 2” NPT w/ 3/8” return port for use w/models 1:1, 3:1 and 5:1 pumps.

Provides convenient return path for relief valve kits.

2” Double Tap Connection with

Return Port:

P/N

540035

with 1” NPTF Suction, 1” NPTM Pump

Connection & 3/8” Relief Valve Return Port.

P/N

540036

with 1 1 ⁄

2

” NPTF Suction, 1 1 ⁄

2

” Pump Connection & 3/8” Relief

Valve Return Port.

Bung Adapters:

P/N

22242

Wall Mount Bracket for use with

1:1 (32091), 3:1 (20001T) and

5:1 (21100T) Stub Pumps.

P/N

22243

Wall Mount Bracket for use with high flow 5:1 pumps 21200 and 21300.

P/N

22156

(A.) Standard duty 2”bung adapter fits

1:1, 3:1 and 5:1 pumps.

P/N

22157

(B.) Heavy duty 2” bung adapter fits 1:1,

3:1 and 5:1 pumps.

P/N

22158

(C.) Heavy duty 2” bung adapter for 5:1 high flow pumps 21200, 21300, and high ratio pumps 21400 and 21500.

A.

C.

B.

Expansion/Thermal Relief Valve Kits:

All fluids are subject to thermal expansion, this can be a significant problem in any shop and may be the cause of leaks, blistered hoses, dripping meter/control handles, stiff and hard to pull triggers on control handles and many other related problems. This is especially the case when fluid is pumped from outside or basement locations or when fluid lines are near ceilings subject to heating. Pressure has been measured to increase approximately 43 PSI per degree

Fahrenheit in a typical hose reel. These potential over pressurization problems can be easily remedied with the installation of a thermal expansion relief kit, so as to limit fluid line pressure buildup. Listed below is a selection of applications.

Used on installed plumbing for relief of excessive pressure, due to fluid temperature rise.

150 PSI Relief Valve Kits, for use with 1:1 and Double

Diaphragm Pumps

P/N

540043

Relief valve kit for 1/2” discharge pumps

P/N

540044

Relief valve kit for 3/4” discharge pumps

P/N

540045

Relief valve kit for 1” discharge pumps

P/N

540060

Brass relief valve for use with water based products. Adjustable from 20 to 300 PSI.

750 PSI Relief Valve Kits, for use with 3:1 and 5:1 Ratio Pumps

P/N

540025

Relief valve kit for 1/2” discharge pumps

P/N

540037

Relief valve kit for 3/4” discharge pumps

For Fuel Systems

P/N

540050

1/2” expansion relief valve for fuel systems, 40 PSI relief pressure.

1500 PSI Relief Valve Kits, for use with 8:1 and

13:1 Ratio Pumps

P/N

540046

3/4” NPTM x 3/4” NPTF for easy connection to pump. Use with P/N 22159 bung spacer for convenient fluid return port.

Foot Valves:

For use with modular tubes and NPT extension pipe.

P/N

P/N

950002

1” NPTF

950047

1 1 ⁄

2

” NPTF www.liquidynamics.com

25

DRUM CARTS AND DOLLIES

P/N

51004C

Two wheel drum cart for 120 lb. / 16 gallon drums. Zinc coated steel construction.

Features hanger for hose and oil control handle. Dim. 18 1 ⁄

2

” W x 24” D x 41 1 ⁄

2

” H.

P/N

51003C

Four wheel drum cart for

120 lb. / 16 gallon drums. Zinc coated steel construction, includes drip tray for pump placement during drum change.

Dim. 20” W x 21” D x 38” H.

Tool tray

Bracket and drip tray for drum change

Heavy Duty Drum Covers

Recommended for use with air operated pumps as well as hand pumps. Complete with 2” bung.

P/N

901002

5 Gallon Cover

P/N

901006

16 Gallon Cover

P/N

901005

55 Gallon Cover

P/N

950007

5 gallon / 35 lb. Drum Dolly

P/N

950006

16 gallon / 120 lb. Drum Dolly

Drum dollies have powder coated finish w/outrigger casters for stability and durability. Urethane ball bearing casters provide quiet, trouble free operation and long life.

Adjustable band to fit variations in drum diameter.

26

Swivel caster with brake

P/N

51009C

Heavy duty four wheel drum cart for 420 lb. /

55 gallon drums. Heavy zinc coated steel construction with bracket and drip tray for drum change. Now includes tow bar for improved handling capability. Dim. 31” W x

36” D x 36” H.

These drum dollies utilize heavy duty steel wheels on ball bearings. Casters are bolted to the powder coated 12 gauge steel frame, allowing easy replacement.

P/N

950012

30 gallon Drum Dolly

P/N

950008

55 gallon / 420 lb. Drum Dolly

Casters are bolted for easy replacement

800.894.3572

DRUM HANDLING EQUIPMENT AND COVERS

55 Gallon Drum Handler

Height 38 1 ⁄

2

” x 33” overall width and 27” opening width. Shipping weight is 48 lb., unit is UPS shippable.

P/N

950060

Heavy Duty Drum Cradle

Heavy duty one piece construction provides an economical drum stand for draining and storing 30 and 55 gallon drums.

Complete with zinc plated handle for additional leverage.

P/N

950009

Drum Cradle, 1,000 lb. capacity

Hand Truck

Dual purpose design allows moving conventional boxed items as well as 16, 30 and 55 gallon drums. Unique chime hook design can be rotated out of the way when not being used.

600 lb. capacity, 10” solid rubber wheels, 50” overall height.

P/N

950066

Drum Handling Hand Truck

P/N

950068

Engineered to efficiently and safely move a variety of drum types and sizes. The unique chime hook assembly will handle both steel or fiber drums from

25” to 48” in height. The drum cradle provides perfect balance while loading and moving.

Small rollers placed behind the “toes” allow easy loading and unloading from pallets. This drum handler is equipped with 10” x 2 1 ⁄

2

” moldon rubber wheels with roller bearings and grease fittings for long life. 1,000 pound capacity. Ships via common carrier, 75 lb.

Drum Heaters

Heavy duty silicone rubber band heaters feature a patented serpentine wound and grounded heating element laminated between two layers of 20 mil fiberglass reinforced silicone rubber. These 120 VAC heaters include a 6 foot power cord and plug. Not for use with lined steel

drums or plastic drums.

P/N

950071-05

Fits 5 gallon/35 lb pails,

120 VAC, 550 watt, 4.6 amp heater

P/N

950071-16

Fits 16 gallon/120 lb drums, 120 VAC, 700 watt, 6 amp heater

P/N

950071-30

Fits 30 gallon drums, 120 VAC, 1000 watt, 8.4 amp heater

P/N

950071-55

Fits 55 gallon/420 lb drums, 120 VAC, 1200 watt, 10 amp heater

Drum Quilt

Protects the contents of 55 gallon/420 lb drums from rapid temperature change.

Uses patented multilayer insulating technology where each layer is designed to act as a barrier to any of the heat transfer mechanisms, such as conduction, convection, moisture and radiation.

Ruggedly built and easy to install. Caution: These quilts are not designed for use with heaters of any kind.

P/N

950073

55 Gallon/420 lb Drum Quilt www.liquidynamics.com

27

MOBILE OIL SYSTEMS

P/N

20073-S16

Basic 3:1 Gear Oil Pump System, Includes:

• P/N 20073T, 3:1 Oil Pump with foot valve and inlet screen

• P/N 901006, 16 gallon drum cover with 2” bung

• P/N 22157, 2” bung adapter

• 540201-G, 1/4” Air Filter/Regulator w/Gauge

P/N

21073-S16

Same as 20073-S16 except with 5:1 Pump

P/N

20073-S17

Complete 3:1 Gear Oil Pump System with

Control Handle, Includes:

• P/N 20073T, 3:1 Oil Pump with foot valve and inlet screen

• P/N 901006, 16 gallon drum cover with 2” bung

• P/N 22157, 2” bung adapter

• P/N 81200-10, 1/2” x 10’ oil hose

• P/N 950006, 4 wheel band dolly

• P/N 100113-RA, Oil Control Handle with rigid spout and auto tip

• P/N 540201-G, 1/4” Air Filter/Regulator w/Gauge

P/N

21073-S17

Same as 20073-S17 except with 5:1 Pump

(Drum not included)

P/N 20073 - S18 shown

P/N

20073-S18

Complete 3:1 Gear Oil Pump System with Electronic Meter, Includes:

• P/N 20073T, 3:1 Oil Pump with foot valve and inlet screen

• P/N 901006, 16 gallon drum cover with 2” bung

• P/N 22157, 2” bung adapter

• P/N 81200-10, 1/2” x 10’ oil hose

• P/N 950006, 4 wheel band dolly

• P/N 100600-RA, Electronic meter with rigid spout and auto tip

• P/N 540201-G, 1/4” Air

Filter/Regulator w/Gauge

P/N

21073-S18

Same as 20073-S18 except with

5:1 Pump

Mobile Cart System for use with

16 Gallon / 120 lb. Drums

P/N

20073-S41

Includes:

• P/N 20073T, 3:1 pump

• P/N 22157, bung adapter

• P/N 51003C, cart

• P/N 81200-12, 1/2” x12’ oil hose

• P/N 901006, cover

• P/N 100600-RA, electronic meter

• P/N 540201-G, 1/4” air filter/regulator w/gauge

P/N

20073-S41-V1

Same as above but w/o cover

P/N

20073-S42

Includes:

• P/N 20073T, 3:1 pump

• P/N 22157, bung adapter

• P/N 51003C, cart

• P/N 81200-12, 1/2” x 12’ oil hose

• P/N 901006, cover

• P/N 100113-RA, oil control handle

• P/N 540201-G, 1/4” air filter/regulator w/gauge

P/N

20073-S42-V1

Same as above but w/o cover

28

800.894.3572

MOBILE CART SYSTEMS

Mobile Heavy Duty Cart System for use with

55 gallon Drums

P/N

20094-S31

Includes:

• P/N 20094T, 3:1 Pump

• P/N 22157, Bung Adapter

• P/N 81200-12, 1/2” x 12’ Oil Hose

• P/N 100600-RA, Electronic Meter

• P/N 51009C, Heavy Duty Cart

• P/N 540201-G, 1/4” Air Filter/Regulator

P/N 20084-S31 shown

Mobile Heavy Duty Cart System for use with 55 gallon

Drums w/ 25’ Hose Reel

P/N

20094-S32

Includes:

• P/N 20094T, 3:1 Pump

• P/N 22157, Bung Adpater

• P/N 43003-25L, 1/2” x 25’ Hose Reel

• P/N 100600-RA, Electronic Meter

• P/N 51009C, Heavy Duty Cart

• P/N 540201-G, 1/4” Air Filter/Regulator

P/N 20094T-S32 shown

Electric Oil Transfer Cart for 55 gallon Drums w/25’ Reel,

System Includes:

P/N

51009C-S1

• P/N51009C, Heavy Duty 55 Gallon Drum Cart

• P/N 33221, 3 GPM, 115 VAC Electric Pump, 170 PSI max.

• P/N 950065, 1” x 6’ Suction Hose Kit w/stinger

• P/N 43003-25L, 1/2” x 25’ Hose Reel

• P/N 100600-RA, Electronic Meter w/rigid spout & auto tip

P/N

51009C-S2

Same as 51009C-S1 except uses 7 GPM electric transfer pump and high flow manual tip on meter to maximize flow rate

P/N 51009C-S2 shown www.liquidynamics.com

29

MOBILE CART SYSTEM

The Liquidynamics Mobile Cart System with 75 gallon storage tank provides a clean, safe and efficient way to dispense fluids.

The 20 additional gallons of storage capacity allows the user to add the entire contents of a 55 gallon drum before running out of product. This eliminates the potential of having partially empty 55 gallon drums accumulate and does away with the difficulty, mess and time consuming chore of changing drums – you simply pump the fluid from the 55 gallon drum into the

Mobile Cart!

The standard system includes a 3:1 pneumatic pump, 1/2” x 25’ hose reel, electronic meter, control handle with rigid spout, automatic tip, air filter/regulator, 75 gallon storage tank and heavy duty cart. The heavy duty cart features large 10” dia.

wheels, 8” dia. casters (with brake) and tow bar for easy maneuverability.

You can easily customize this system to best fit your application by choosing components from the provided selection chart.

In keeping with the current emphasis on fluid cleanliness, Liquidynamics offers dessicant breathers to ensure air drawn into the tank is free of particulate and moisture contamination. As a final assurance that only clean fluid is being dispensed from your mobile cart, a high pressure discharge filter is available in several micron ratings.

1/2” x 25’ Hose Reel, up to 50’ length available

Available Dessicant Breather

75 Gallon

Storage Tank

(95 Gallon

Tank Available)

Available

Discharge Filter

10” dia. Wheels

3:1 Pneumatic Pump, other ratios available

Air Filter Regulator

Tank Level Gauge

Specifications

Height w/ reel

Width

Length

56”

29”

28”

Weight (empty) 295 lbs.

Available Air Reel up to 40’ length

8” dia. Casters with Brake

Heavy Duty Cart with Tow Bar

30

800.894.3572

MOBILE CART SYSTEM SELECTION GUIDE

SYSTEM IDENTIFIER

MX 55 Gallon Drum Cart System

M7 Cart System with 75 Gallon Tank

M9 Cart System with 95 Gallon Tank

PUMP SELECTION

P12 1:1 Pump w/Bung Adapter

P20 3:1 Pump w/Bung Adapter

P21 5:1 Pump w/Bung Adapter

P51 3.0 GPM Electric Pump, Manual on/off, 115 VAC, 170 PSI Max

FLUID REEL/HOSE SELECTION

H12 1/2” x 12’ Oil Hose

R25 1/2” x 25’ Oil Hose Reel

R40 1/2” x 40’ Oil Hose Reel

R50 1/2” x 50’ Oil Hose Reel

METER SELECTION

VN Control Valve w/o Meter

EN Electronic Non-Preset Meter, LD150

EP Electronic Preset Meter, K500

ES Electronic Preset Meter, BP100S

MN Mechanical Non-Preset Meter

MP Mechanical Preset Meter

TYPE OF DISCHARGE SPOUT

R

F

H

Rigid

Flex

Hose, 12”

TYPE OF DISCHARGE TIP

A

M

H

Automatic

Manual

High Flow Manual

AIR REEL

XXX Not Required

A30 30’ Air Reel

A40 40’ Air Reel

P/N M7P20R25ENRM XXX XX XX shown

DESSICANT BREATHERS (Includes Pre-Vent Fill Cap)

XX Not Required

D1 PureLube Dessicant Breather, 3”x3”

D2 PureLube Dessicant Breather, 5”x5”

DISCHARGE FILTER

XX Not Required

F1 Discharge Filter, 10 micron

F3 Discharge Filter, 3 micron

F5 Discharge Filter, 5 micron

MX P20 R25 EN R M XXX XX XX

Example: Mobile Cart System MX P20 R25 ENRM XXX XX XX as shown above is a basic mobile cart system with heavy duty cart for 55 gallon drums, 3:1 pneumatic pump to fit a 55 gallon drum, 1/2” x 25’ hose reel 1/2” x 6’ connection hose, air filter/regulator and electronic digital meter with rigid spout and manual tip.

Your Mobile Cart can easily be customized to fit your specific application by selecting options shown above.

NOTE: For pricing see back section of price booklet.

www.liquidynamics.com

31

MODEL

MA-5R,

P/N 10005R

Cast iron rotary hand pump, two vane construction, for use with lubricating oils.

Comes complete with 2” bung adapter and three piece steel suction pipe. Not recommended for use with gasoline. Approx. 20 revolutions per gallon.

HAND OPERATED PUMPS

MODEL

MA-16,

P/N 10016

Heavy duty hand operated lever drum pump, with high volume output and hose thread fitting at discharge. Fits 16, 30 and 55 gallon drums. For use with light oils, ATF,

100% antifreeze, hydraulic fluids and diesel fuel. Includes telescoping suction pipe. Approx. 12 strokes/gal.

MODEL

MODEL

MA-9,

P/N 10009

“T” Handle pump with curved “turn up” non drip spout. Includes 2” bung adapter suitable for 16 to 55 gallon drums. Typical uses include diesel fuel, light oils,

ATF, antifreeze and other similar petroleum products.

Approx. 1 stroke/qt.

MA-9T,

P/N 10009T

Same as above but with heavy duty construction for heavy duty applications.

P/N

904005

Non Drip Tip with garden hose threads for use with MA-16 hand pumps.

MODEL

MA-10,

P/N 10010

Lever pail pump fits 5 to 6 1 ⁄

2 gallon pails.

Dispenses gear lube via a 6’ nylon reinforced vinyl hose with curved discharge spout. Positive lock nut holds pump securely in position.

Approx. 16 strokes/pint.

MODEL

MA-12,

P/N 10012

Tire sealant pump constructed entirely from aluminum to prevent corrosion.

Has unique double shaft seal to allow high pressure application without leakage past piston seal. Includes 2” bung adapter with integral return port, quick release coupler, graduated pump shaft and 6’ nylon reinforced hose. Max.

discharge volume of 8 oz. per stroke.

MODEL

MA-12-C,

P/N 10012-C

Same as model MA-12 except this includes cover and retaining nut to fit 5 - 6 1 ⁄

2 gallon container.

MODEL

MA-12-K,

P/N 10012-K

Extension kit designed to fit models MA-12 to allow pump to be used with 16 gallon, 30 gallon and 55 gallon drums. Also includes 6’ discharge hose extension.

MODEL

MA-10P,

10010P

Same as MA-10, but includes P/N

100600 Electronic pint meter.

MODEL

MA-10M,

P/N 10010M

Same as P/N 10010 except a lower gear case fitting replaces the discharge spout. For use with outboard marine engines.

P/N

981001R

6’ Hose Kit with curved spout and hose clamp to fit MA-5R.

P/N

981001P

6’ Hose Kit with curved spout and garden hose connection to fit MA-16.

32

800.894.3572

HAND OPERATED PUMPS

MODEL

MA-7,

P/N 10007

Lever hand pump for use with heavy gear oils. Fits 16 gallon and

30 gallon drums. Comes complete with 2” bung adapter and 6’ nylon reinforced discharge hose with curved discharge spout. Approx.

12 strokes/qt.

P/N

10007-S3

Same as P/N 10007 above, but includes P/N 100600 Electronic

Meter

MODEL

MA-70,

P/N 30200

Heavy duty gear oil hand pump designed to fit 5, 16, 30 and 55 gallon containers. Comes complete with 2” bung adapter, telescoping suction pipe,

6’ nylon reinforced discharge hose, ball shutoff valve and curved discharge spout. Approx. 4 strokes/qt.

P/N

30200-S3

Same as P/N 30200 above, but includes P/N 100600 Electronic Meter

MODEL

FR31,

P/N 560028

Heavy cast iron quart stroke pump that reliably and accurately dispenses one quart with each handle rotation. Rack and pinion design allows for easy calibration.

Provision for padlock feature.

Includes swing return drain tube and telescoping suction pipe.

MODEL

FR152,

P/N 560000

Lightweight cast aluminum piston hand pump uses a stainless steel inner liner to prevent wear of cylinder. Pump delivers up to 20 gallons per 100 strokes and is ideal for use with gasoline, diesel fuel and light oils.

Includes anti-siphoning device, padlock feature, bung adapter and telescoping suction pipe.

MODEL

FR112,

P/N 560003

Cast aluminum rotary vane pump suitable for pumping medium viscosity liquids as well as oils, gasoline and diesel fuels.

Rotary action allows smooth, continuous fluid transfer at up to 10 gallons per 100 revolutions.

Complete with telescoping suction pipe, bung adapter, 8 ft. nitrile hose with nozzle and vacuum breaker to prevent siphoning.

P/N

10015

High Flow rotary hand pump discharges approximately 1 quart per revolution and can empty a 55 gallon drum in a matter of minutes.

Pump body is constructed of lightweight aluminum with gear driven impellers and Nitrile seals which makes this pump ideal for transferring larger quantities of lightweight oils, hydraulic fluids, transmission fluid, antifreeze and diesel fuel.

Pump is supplied with bung adapter, suction pipe, inlet strainer and 1” x 6’ oil discharge hose with nozzle.

www.liquidynamics.com

33

HAND OPERATED PUMPS

MODEL

MA-2,

P/N 10002

Rugged polypropylene construction with polypropylene coated steel shaft and nitrile seals. Fits 5 to 55 gallon containers and comes with adapter to fit 2” buttress as well as 2” pipe threads. For use with light oils, hyd. fluid, ATF, mixed antifreeze and mild corrosive fluids.

Approx. 14 strokes/gal.

MODEL

MA-20,

P/N 560008

Polypropylene piston pump uses

Buna-N seals for transfer of fluids such as engine oil, gear oil, antifreeze and similar fluids compatible with materials of construction. Complete with telescoping suction pipe to fit drums up to 55 gallon. Approx. 12 strokes/gal.

MODEL

MA-2N,

P/N 10002N

Strong nylon body utilizes a stainless steel pump shaft and

Teflon shaft seal for compatibility with a broad range of fluids. Pump is sized to fit 55 gallon drums, complete with 2” bung adapter and discharge spout.

MODEL

MA-20V,

P/N 560008V

Same as MA-20 except uses viton seals for use with various industrial chemicals such as mild acids, methyl ethyl ketone and similar fluids.

MODEL

MA-3,

P/N 560006

Polypropylene plunger pump screws directly onto the Reike spout on 5 gallon containers. Complete with 5’ nylon reinforced hose, ball valve nozzle and spout. For use with light oils, ATF, hyd.

fluid and 100% antifreeze. Approx. 4 strokes/qt.

MODEL

MA-3J,

P/N 560006J

Same features and construction as the

MA-3 above, except made to fit 2 1 ⁄

2 gallon jug with 63mm cap. For use with light oils, ATF, hyd. fluid and 100% antifreeze. Approx. 1 fluid oz. per stroke.

MODEL

MA-31,

P/N 10031

Polypropylene construction with nitrile seals and stainless steel piston shaft which allows use with water, water based chemicals, mild acids and mild alkali solutions as well as oils. Approx.

16 strokes/gal.

P/N

560101

Buttress adapter allows use of NPT threaded pumps in plastic drums using buttress threads.

MODEL

MA-6,

P/N 10006C

Heavy duty syphon pump constructed of polyethylene. For use with light oils, water, antifreeze and many chemicals.

Flow rate of approx. 5 gal./min. nominal.

34

MODEL

MA-40,

P/N 560019

All brass plunger pump ideal for use with solvents and chemicals compatible with brass construction and PTFE seals.

Complete with 2” NPT threads to fit 55 gallon drums. Approx.

1/2 pint/stroke.

800.894.3572

P/N

30200-S6

Mobile Hand Pump

System for use with

16 gallon drums.

Includes:

• 30200 Hand Pump

• 51003C 4 Wheel Cart

• 901006 Cover

HAND OPERATED MOBILE GEAR OIL PUMP KITS

P/N

30200-S8

Mobile Hand Pump System for use with 55 gallon drums.

Includes:

• 30200 Hand Pump

• 51009C 4 Wheel Cart

P/N

30200-S9

Same as above but includes

P/N 100600 In-line Meter

P/N

30200-S7

Same as above but includes P/N

100600 In-line Meter

(Drum not included)

Light Duty Gear Oil

Hand Pump Systems for 16 gallon drums.

P/N

10007C

Pump & Cover

P/N

10007-S2

Pump, Cover & Dolly

P/N

10007-S1

Pump, Cover, Dolly, Meter

P/N 10007-S1 shown

Heavy Duty Gear Oil

Hand Pump Systems for 16 gallon drums.

P/N

30200-C

Pump & Cover

P/N

30200-S1

Pump, Cover, Dolly

P/NL

30200-S2

Pump, Cover, Dolly and

Meter

(Drum not included)

P/N 30200-S2 (shown) www.liquidynamics.com

Heavy Duty Gear Oil

Hand Pump Systems for 55 gallon drums.

P/N

30200-S10

Pump & Dolly

P/N

30200-S11

Pump, Dolly and Meter.

(Drum not included)

P/N 30200-S10 (shown)

35

P/N

24136-06

This unique 21 gallon transfer kit utilizes an on board 1:1 air operated pump and valve system to dispense fluid as would normally be expected and then refill itself by changing valve positions utilizing the same on board pump. There is no need to have a separate pump to fill the portable tank.

Includes 6’ discharge hose and electronic meter with control valve.

MOBILE OIL DISPENSERS

P/N

24128

6 Gallon Capacity oil dispenser pressurizes to 120 PSI air pressure to dispense oil. Includes oil level sight gauge, 6 ft.

discharge hose, oil dispense valve and manual non drip tip.

P/N

24128MQ

Same as P/N 24128 above, except includes P/N 100600

Electronic Meter.

P/N

24135

Air operated oil dispenser, 21 gallon capacity. Includes 3:1 ratio pump, 12 ft. discharge hose and oil control valve with rigid spout and auto tip.

P/N

24135MQ

Same as P/N 24135 above, except includes Electronic Meter.

P/N

24127

Hand operated oil dispenser,

6 gallon capacity. Includes 6 ft. discharge hose, sight level gauge, curved spout and shutoff valve.

36

P/N

24130

Hand operated oil dispenser with 21 gallon capacity. Supplied with 6 ft. discharge hose, curved spout and shutoff valve.

P/N

24130MQ

Same as P/N 24130 above, except includes P/N

100600 Electronic Meter.

P/N

24132

This highly portable 25 gallon oil caddy is ideal for dispensing specialty lubricants using a high output double diaphragm pump. Included are a double diaphragm pump,electronic meter, fluid control handle, 1/2” x

8’ oil discharge hose and an air filter/regulator .

Constructed of high strength, cross linked polyethylene for durability and long life. Intended for use with motor oils, ATF and differential oils.

800.894.3572

MCO FLUID MANAGEMENT SYSTEM

The MCO Fluid Management System is a flexible and user friendly method of controlling and monitoring OIL, ATF,

Hydraulic fluid, Antifreeze and similar shop fluids.

System Highlights are:

• Inventory control and management

• Dispensing allowed only by authorized personnel

• Ability to preset quantity of fluid desired

• Precision dispensing via two stage solenoid valve

• On board ticket printer capability

• Possibility to use as stand alone or with PC interface

• Remote LED display option

• Operator ID number

• Expandable to 32 connected modules for a total of 384 dispensing point capability

• Handles multiple products www.liquidynamics.com

37

MCO FLUID MANAGEMENT SYSTEM

Power Unit (PU)

Supplied with each control unit (CU)

• Connected to a 115 VAC power source, it provides low voltage power to the system, houses the solenoid relays, fuses and distribution circuitry.

• The Power Unit is capable of directly controlling up to four dispense points.

• Two Expansion Power Units (EPU) may be added to the

Power Unit for a total of 12 dispense points.

(Supplied with control unit)

P/N 100703

P/N 100704 (2 stage)

P/N 100715 (single stage)

Pulser/Solenoid Module (GPV) and (GPVS)

• (GPV) A single module that contains a metering pulser and dual solenoids for improved preset metering control. Two stage solenoids, P/N 100704, are recommended when using high flow rates or low viscosity fluids and high accuracy is desired.

• (GPVS) A single stage solenoid/pulser, P/N 100715, (GPVS) is available for most normal installations and provides an accurate and cost effective fluid control solution.

• An inlet filter screen is included to protect the solenoids as well as the pulser.

• Connection is via 1/2” NPTF inlet/outlet fittings.

• User addressable calibration.

38

Oil

P/N 100701 (w/o ticket printer)

P/N 100702 (w/ ticket printer)

800.894.3572

P/N 100706

Expansion Power Unit (EPU)

P/N 100703

• When connected to the Power Unit (PU) it allows control of an additional four dispense points.

• Two Expansion Power Units may be connected to the same Power Unit (PU) for a maximum of 12 dispense points.

• Houses the additional solenoid relays, fuses and control circuitry required.

LED Display (LD)

P/N 100706

• Provides excellent visibility from a distance via brightly lit 2

1

4

” tall digits.

• Displays the on-going batch total during dispensing.

• Alternately displays selected dispenser number.

Computer not included with system.

P/N 100705

Control Unit (CU)

P/N 100701 w/o ticket printer

and (CU/TE)

P/N 100702 w/ticket printer

A large keyboard and easy to read LCD display allows the user to access all of the MCO control functions.

• Initiate dispensing operation by keying a pre-assigned, four digit PIN code.

• Input a pre-assigned 4 digit numeric or “free input” 10 digit alphanumeric job function if desired.

• Select the product to be dispensed. Product name is displayed on the LCD panel to prevent errors.

• Preset, as well as manual dispensing is allowed. All quantities dispensed are recorded as to date, time, PIN number, quantity and type of fluid.

• An optional ticket printer (CU/TE), P/N 100702, provides local report capability after each operation or upon request.

• Up to 16 CUs may be networked for a total of 192 dispense point capability.

PC Communication Kit

(PC and RSC)

P/N 100705

• A software program that allows the collection of relevant data from dispensing operations of up to 99 operators.

• Includes an RSC adapter (RS235/RS485 converter), which allows remote data transmission via RS485 protocol.

• Very user friendly due to the use of the Windows

Operating System.

• Allows any number of tanks and fluids to be set up.

The system updates and displays each tank level, warns if low tank level conditions exists and stops pump operation when fluid outage occurs.

• Declining balance inventory capability.

• System logs and stores in memory all tank loading/unloading operations.

• Data output may be filtered and/or arranged to optimize the relevant data (according to time period, user, tank or product).

• Limits access to information by use of various levels of passwords.

• Microsoft Access ® and Windows 2000 required for operation.

® or higher www.liquidynamics.com

39

40

“C”

“C”

“C”

“C” (Max. 50’ typical)

“C”

“C”

“C”

“C”

“C”

“C”

“C”

“C”

Reel 12

Reel 11

Reel 10

MECHANICAL METERS

Liquidynamics supplies a broad selection of oil meters, control valves and accessories.

Preset and non-preset meters are available in both mechanical and electronic versions.

Mechanical Meters Preset and Non-Preset

Accuracy of these meters is +/- 0.65% within the flow range of 0.4 to 4 GPM. Maximum operating pressure is 1,000 PSI.

MODEL

BM03 Non-Preset

P/N 530100

Pint calibration with 8 pint dial

capacity and 1/4 pint graduation, totalizes in pints. Ten inch tall discharge spout is equipped with a

1/4” manual tip designed to allow easy filling of differentials. Inlet is 1/2”

NPTF swivel. For use with gear oils.

MODEL

BM08 Non-Preset

P/N 530101

Quart calibration with 16 quart dial

capacity and 1/4 quart graduations, totalizes in quarts. Rigid discharge spout has an automatic non drip tip.

Meter comes standard with 1/2” NPTF inlet swivel. For use with motor oils, gear oils, ATF and antifreeze (ethylene glycol).

MODEL

MODEL

BM15 Non-Preset

P/N 530102

Quart calibration with 16 quart dial capacity and

1/4 quart graduation, totalizes in quarts. Meter comes with a flex discharge spout and manual shutoff tip. For use with motor oils, gear oils, ATF and antifreeze (ethylene glycol).

BM19 Preset

P/N 530107

Quart calibration with preset capability, 16 quart dial capacity,

1 quart graduations and quart totalizer. Comes complete with rigid spout, non drip tip and 1/2”

NPTF inlet swivel. For use with motor oils, gear oils, ATF and antifreeze (ethylene glycol).

MODEL

BM20 Preset

P/N 530109

Quart calibration with preset capability,

60 quart dial capacity, 1 quart graduations and gallon totalizer. Comes complete with rigid spout, non drip tip and

1/2” NPTF inlet swivel. For use with motor oils, gear oils, ATF and antifreeze (ethylene glycol).

MODEL

BM20-HM

P/N 530109-HM

Same as 530109 but with 1/2” x 12” hose and manual tip

MODEL

BM20-RH

530109-RH

Same as 530109 but with 4” rigid spout and manual tip, 7” overall length

MODEL

BM20-BA

530109-BA

Same as 530109 but with rigid bent spout and automatic tip,

7” overall length

MODEL

BM19-HM

P/N 530107-HM

Same as 530107 but with 1/2” x 12” hose and manual tip

MODEL

BM19-RH

P/N 530107-RH

Same as 530107 but with 4” rigid spout and manual tip, 7” overall length

MODEL

BM19-BA

P/N 530107-BA

Same as 530107 but with rigid bent spout and automatic tip,

7” overall length

MODEL

BM20G Preset

P/N 530113

Gallon calibration with preset capability, 60 gallon dial capacity,

1 gallon graduations and gallon totalizer. Meter includes rigid spout, non drip tip and 1/2” NPTF inlet swivel.

For use with motor oils, ATF and antifreeze (ethylene glycol).

www.liquidynamics.com

41

MECHANICAL METERS, NON-PRESET

The Liquidynamics LD25 mechanical meter is designed to be simple and reliable and is intended for use with engine oils, gear oils, ATF, hydraulic fluids and 100% antifreeze. Oval gear technology is used to measure the amount of fluid passing through the measuring chamber. The oval gears then drive a simple mechanical counter to provide high accuracy measurement with low pressure loss. The LD25 has a 4 digit (999.9), resetable batch total, which indicates quarts dispensed and a 6 digit non-resetable, cumulative total, which indicates cumulative gallons dispensed.

A die cast aluminum body provides a strong housing that is rated to 1,000 PSI operating pressure and 3,000 PSI burst pressure.

The control handle features an inlet strainer to protect the valve and oval gears, while a trigger guard prevents accidental activation. A “balanced” valve design reduces trigger pressure and allows gradual starting and stopping of fluid flow. The LD25 mechanical meter is available in a wide variety of nozzle configurations to fit most any application.

P/N 100395-RA (shown)

42

P/N

100395-RA

Mechanical Meter w/ Control Handle,

Rigid Spout and Auto Tip

P/N

100395-RM

Mechanical Meter w/ Control Handle,

Rigid Spout and Manual Tip

P/N

100395-RMH

Mechanical Meter w/ Control Handle, Rigid

Spout and Manual High Flow Tip

P/N

100395-HM

Mechanical Meter w/ Control Handle, 3/8”x

12” Hose and 1/2” Manual Tip

P/N

100395-FA

Mechanical Meter w/ Control Handle, Flex

Spout and Auto Tip

P/N

100395-FM

Mechanical Meter w/ Control Handle, Flex

Spout and Manual Tip

P/N

100395-FMH

Mechanical Meter w/ Control Handle, Flex

Spout and High Flow Manual Tip

P/N

100395-HMH

Mechanical Meter w/ Control Handle, 1/2”x 12”

Hose and Manual High Flow Tip

800.894.3572

ELECTRONIC METERS PRESET

Model K500 Series

The K-500 Electronic Preset Meter may be used to dispense a preset quantity of oil, transmission fluid, hydraulic fluid, antifreeze and other compatible fluids. It is powered by four, field replaceable 1.5V AA batteries. Units of measurement are easily switched between pints, quarts, gallons and liters. The meter flow range is 1/4 to 8 GPM with a maximum operating pressure of 1,000 PSI and an accuracy of +/- 1/2%. Preset capability is from 0.1 to 99.9 units and may be programmed with up to 5 different frequently used preset quantities in addition to quick recall of the last used preset quantity. May also be used to show flow rate in gallons per minute. This preset meter is available with a wide selection of discharge spouts to fit most any application. Discharge spout may be positioned at five different angles and tip rotates 90°. Inlet is 1/2” NPTF swivel.

Spout may be rotated 90° and discharge tip may be rotated 270°

P/N 100351-RSA shown

P/N

100351-RSA

K500 Meter with Rigid Spout and

Automatic Tip; tip rotates 270°

P/N

100351-RM

K500 Meter with Rigid Spout and

1/4” Manual Tip; tip rotates 270°

P/N

100351-RMH

K500 Meter with Rigid Spout and

High Flow Manual Tip; tip rotates 270° www.liquidynamics.com

P/N

100351-FA

K500 Meter w/ Flex Spout and Auto Tip

P/N

100351-FM

K500 Meter w/ Flex Spout and 1/4” Manual Tip

P/N

100351-FMH

K500 Meter w/ Flex Spout and High Flow Manual Tip

43

ELECTRONIC METERS – PRESET

Model BP100 Series

This pre-settable electronic meter features a greatly simplified operation; you simply enter the quantity you wish to dispense and pull the trigger. Meter is powered by four AA alkaline batteries which can be easily replaced without loss of calibration or data. Units of measure displayed can be changed from quarts, to pints, gallons or liters. Inlet is 1/2” NPTF and includes a filter screen to protect the oval gear metering elements. This meter is intended for use with engine oil, gear oil, transmission fluid, hydraulic fluid and antifreeze.

P/N

530125S-RA

Standard Meter w/rigid spout and auto tip

P/N

530125S-RM

Standard Meter w/rigid spout and manual tip

P/N

530125S-FA

Standard Meter w/flex spout and auto tip

P/N

530125S-FM

Standard Meter w/flex spout and manual tip

P/N

530125S-RMH

Standard Meter w/rigid spout and high flow manual tip

P/N

530125S-FMH

Standard Meter w/flex spout and high flow manual tip

44

P/N

530125S-HM

Standard Meter w/12” flex hose and manual tip

P/N

530125S-HMH

Standard Meter w/12” flex hose and high flow manual tip

800.894.3572

ELECTRONIC METER NON-PRESET

Model LD150 Series

These compact and lightweight, electronic digital meters provide the user with a cost effective method for measuring fluids such as engine oil, gear oil, transmission fluid, and antifreeze (ethylene glycol). Two rotating oval gears are used to provide a simple, reliable method of measurement. Meters are powered by two field replaceable AAA alkaline batteries, with a minimum one year life expectancy. Accuracy is +/- 0.5% over a flow range of 0.26 to 8 GPM and maximum operating pressure of 1,000

PSI, inlet is 1/2” NPTF swivel. The units of measure are shown on the LCD display and are easily changed from quarts to

pints, gallons or liters, cumulative total indicates gallons (or liters).

P / N

100600-RA

Meter with rigid spout and auto tip

P / N

100600-RM

Meter with rigid spout and manual tip

P / N

100600-FA

Meter with flex spout and auto tip

P / N

100600-FM

Meter with flex spout and manual tip

P / N

100600-RMH

Meter with rigid spout and manual high flow tip

P / N

100600-FMH

Meter with flex spout and manual high flow tip

P / N

100600-HM

Meter with 3/8” x 12” hose and 1/4” manual tip

P / N

100600-HMH

Meter with 1/2” x 12” hose and 1/2” manual high flow tip www.liquidynamics.com

45

ELECTRONIC METERS NON-PRESET

Model LB300 Series

These meters may be programmed to display pints, quarts, gallons or liters. Power is supplied by a lithium battery with a life expectancy of 3 to 5 years. Flow range is 0.25 to 8.0

GPM and 1,500 PSI operating pressure.

P/N

530124-RA

Meter with rigid spout and auto tip

P/N

530124-RM

Meter with rigid spout and manual tip

P/N

530124-RMH

Meter with rigid spout and manual high flow tip

P/N

530124-FA

Meter with flex spout and auto tip

P/N

530124-FM

Meter with flex spout and manual tip

P/N

530124-FMH

Meter with flex spout and manual high flow tip

P/N

530124-HM

Meter with 3/8” x 12” hose and 1/4” manual tip

Electronic Meter – Pistol Grip, Non-Preset

These meters provide perfect balance and a comfortable grip while being lightweight and rugged. They are designed specifically to dispense Motor Oil, Gear

Oil, Transmission Fluid and Anti-Freeze and are a perfect choice for overhead reel systems.

Powered by a lithium battery with a typical 5 year life expectancy.

P/N

530115

Pistol grip electronic meter with rigid spout and auto tip

46

P/N

530124-HMH

Meter with 1/2” x 12” hose and 1/2” manual high flow tip

P/N

530116

Pistol grip electronic meter with flex spout and manual tip

800.894.3572

FLUID CONTROL VALVES

Model VN-200 Series

These fluid control valves are an economical and reliable method of controlling and dispensing common shop fluids such as engine oil, gear oil, transmission fluid, antifreeze and hydraulic fluid.

The “balanced” valve design with trigger guard allows positive fluid control for easy “topping off” without splashing. The valve is also available in a “trigger lock” version.

Trigger Lock Option

P/N

100113-RA

Fluid Control Valve with rigid spout and auto tip

P/N

100113T-RA

w/ trigger lock

P/N

100113-RM

Fluid Control Valve with rigid spout and manual tip

P/N

100113T-RM

w/ trigger lock

P/N

100113-FA

Fluid Control Valve with flex spout and auto tip

P/N

100113T-FA

w/ trigger lock

P/N

100113-FM

Fluid Control Valve with flex spout and manual tip

P/N

100113T-FM

w/ trigger lock

P/N

100113-RMH

Fluid Control Valve with rigid spout and manual high flow tip

P/N

100113T-RMH

w/ trigger lock

P/N

100113-FMH

Fluid Control Valve with flex spout and manual high flow tip

P/N

100113T-FMH

w/ trigger lock

P/N

100113-HM

Fluid Control Valve with 3/8” x 12” hose and 1/4” manual tip

P/N

100113T-HM

w/ trigger lock

P/N

100113-HMH

Fluid Control Valve with 1/2” x 12” hose and 1/2” manual high flow tip

P/N

100113T-HMH

w/ trigger lock www.liquidynamics.com

47

P/N

METERS AND ACCESSORIES

32107

These high flow control valves are an excellent accessory when maximum flow is desired, especially when Liquidynamics high flow pumps are being used.

These control valves are rated to

1,000 PSI and are for use with motor oil, gear oil, hydraulic fluid, transmission fluid and antifreeze. They are supplied with a 1” NPTF swivel inlet and your choice of discharge fittings.

The range of High Flow Control Valves has been expanded to include rigid and flex discharge spouts and either automatic or manual tips.

P/N

900297

Lightweight polypropylene ball valve with 8” angled end flange for convenient transfer of liquids into tanks, drums, etc. Uses stainless steel nuts and bolts for a wide range of fluid compatibility. 1” NPTF inlet, 150 PSI max pressure.

P/N

Control Valve with Rigid Spout and Auto Tip

P/N

32107-RA

32107-RM

Control Valve with Rigid Spout and Manual Tip

High Flow Control Valve and Meter

This meter and control valve combination is rated for flow rates of 1.6 to 15 GPM with a working pressure of 1,000 PSI and is ideal for use with high flow pneumatic ratio pumps such as P/N 21200 and 21300. The meter has a 5 digit resettable batch total with floating decimal (will record up to

99,999 units) and a 6 digit non re-settable total. Units of measure can be easily changed from quarts to pints, gallons or liters. Valve inlet is 1” NPTF.

P/N

32107-FA

Control Valve with Flex Spout and Auto Tip

P/N

32107-FM

Control Valve with Flex Spout and Manual Tip

P/N

100163

Swivel Guard, Red

P/N

100161

Swivel Guard, Yellow

P/N

100164

Swivel Guard, Green

P/N

100160

Swivel Guard, Blue

P/N

100162

Swivel Guard, Black

P/N

100390-HMH

High flow meter and valve combination with 12” discharge hose and high flow manual tip.

P/N

100150

Compression Nut Assy.

P/N

100390-RMH

High flow meter and valve combination with rigid discharge spout and manual high flow tip.

P/N

900253

Straight swivel, 1/2” NPTF x 1/2” NPTM,

1,000 PSI working pressure.

For use on mechanical meters only.

P/N

100132

N Size, 1.5V Alkaline Battery Pack

(2 pcs) to fit all K400 electronic meters.

48

800.894.3572

P/N

900245

Rigid spout with auto tip for use with mechanical meters, 1/2” NPTM

P/N

Ridge spout with manual tip for use with mechanical meters, 1/2” NPTM

P/N

81200-01A

1/2” x 12” Hose, 1/2” NPTM x 1/2” NPTM

P/N

900247

81230A

METER ACCESSORIES

3/8” x 12” Hose, 1/2” NPTM x 1/4” NPTM

P/N

81231A

3/8” x 18” Hose, 1/2” NPTM x 1/4” NPTM

P/N

900268

Manual high flow tip, 1/2” NPTF

(for use with 1/2” hose P/N 81200-01A)

P/N

900268-BSP

Manual high flow tip, 1/4” BSP (for replacement on rigid and flex spouts)

P/N

900270

Automatic tip, 1/4” NPTF

(for use with 3/8” hose P/N 81230A)

P/N

900270-BSP

Automatic tip, 1/4” BSP (for replacement on rigid and flex spouts)

P/N

900266

Manual tip, 1/4” NPTF (for use with 3/8” hose P/N 81230A)

P/N

900266-BSP

Manual tip, 1/4” BSP (for replacement on rigid and flex spouts)

ELECTRONIC IN-LINE METERS AND PULSERS

A broad range of in-line meters and pulsers are available for use with viscous fluids in the range of 2 to 2,000 cst. Typical fluids include engine oil, gear oil, transmission fluid, hydraulic fluid and other compatible fluids. Material of construction include; aluminum body, chrome plated steel shafts, acetal gears, neodynium magnet and Buna N Seals.

These meters use oval gear technology to provide excellent accuracy and repeatability with very little pressure drop. The LCD display provides batch and cumulative totals, which are powered by two, type 1N, alkaline batteries. Pulse data is generated by a reed switch, which provides a square wave, switch closure signal. Specific meter and pulser data is detailed in the specification chart on next page.

In-Line Meters w/Display:

P/N

100600

This compact and economical meter has a flow range of 0.25 to 8.0 GPM, 1/2”

NPTF inlet and outlet, operating pressure rating of 1,000 PSI. Units of measure may be easily changed from pints, quarts, gallons or liters. Uses 2 ea. AAA 1.5V

alkaline batteries, 3.0”W x 2.6”L x 2.15”H dim.

P/N

100385

Compact and economical turbine meter is ideal for use with windshield washer fluid, mixed antifreeze solutions and other water based fluids with low viscosities.

Housing is constructed from a conductive polymer to allow static charge dissipation. Display features a rotatable, five digit, resettable batch total with floating decimal and a six digit non re-settable cumulative total. Units of measure can be easily changed from quarts to gallons, pints or liters, meter is powered by two field replaceable AAA alkaline batteries.

1” NPTF inlet/outlet.

P/N

530020

Compact in-line meter has a flow range of 0.25 to 8.0 GPM, has 1/2” NPTF inlet and outlet, operating pressure of 1,500

PSI. Units of measure may be changed from pints, quarts, gallons or liters. Uses a lithium battery for approx. 5 year operating life, 4” Dia. x 2.75” H.

P/N

530021

High flow meter has a flow range from 0.80 to 15 GPM, with a pressure rating of 1,500 PSI which makes it ideal for use with high flow 5:1 pumps as well as the higher ratio 8:1 and

13:1 oil pumps. Functionally it is the same as P/N 530020 described above, but has 3/4” NPTF inlet and outlet threads, approx. 4” dia. x 3.3” high.

P/N

100395

Mechanical in-line meter uses oval gear technology to ensure low pressure drop and high precision and is intended for use with lubricating oils, hydraulic fluids, transmission fluid and 100% antifreeze. The die cast aluminum body is rated to 1,000 PSI working pressure with burst pressure of 3,000 PSI. Measured fluid is displayed via a 3 digit (plus fraction) re-settable batch total which reads in quarts, while the non re-settable totalizer has a 6 digit display reading in gallons. Inlet and outlet fittings are 1/2” NPTF.

www.liquidynamics.com

49

ELECTRONIC IN-LINE METERS AND PULSERS

In-Line Pulsers and Remote Display:

P/N

100104

0.25 – 8.0 GPM, 1/2” NPTF

P/N

100360

1.3 – 13.0 GPH, 1/4” NPTF

(0.022 – 0.22 GPM)

P/N

100380

Gallon calibration, 1.3 – 13.0 GPM, 3/4” NPTF

P/N

100381

Gallon calibration, 2.6 – 26.0 GPM, 1” NPTF

P/N

100382

Gallon calibration, 4.0 – 40 GPM, 11⁄2” NPTF

P/N

100715

Pulser/solenoid module incorporates a metering pulser and 24V solenoid in one convenient package. Has 1/2”

NPTF inlet/outlet.

P/N

100370

1.3 – 13.0 GPM, 3/4” NPTF

P/N

100371

2.6 – 26.0 GPM, 1” NPTF

P/N

100372

4.0 – 40.0 GPM, 11⁄2” NPTF

50

Remote Display for

In-Line Pulsers:

P/N

100366

Universal remote display has 4 digit, re-settable batch total and 6 digit non re-settable cumulative total. Display may be configured to indicate gallons, quarts, pints or liters and may also be used to display flow rate of fluid being measured.

This display can be easily scaled to work with in-line pulsers

P/N 100104, 100360, 100370, 100371, 100372, 100380,

100381 and 100382 shown above.

Unit is powered by two AA alkaline batteries which are easily field replaceable.

800.894.3572

Tower Cube

Ideal for locations where floor space is limited and a large capacity is desired. Tank is constructed from 10 gauge carbon steel to prevent

“bulging”, supplied with a reel mounting bracket, three

2” bung openings and a 1” drain. Finish is gray laquer.

P/N

901075

336 Gallon capacity; 36”L x

36”W x 60”H (65” overall height). Shipping weight 465 lbs.

STORAGE TANKS

P/N

901060V

275 Gallon Vertical Oval Tank, 29”W x 45”L x 64”H, shipping weight 328 lbs. U.L. Listed.

P/N 901068 shown

P/N 901075 shown

Oval Tanks:

These tanks are UL 142 listed, constructed of 12 gauge carbon steel with reinforced “strap” legs.

Tanks have three 2” bung openings, one 3” emergency vent and a 1” drain. Powder coat finish.

P/N

901060

275 Gallon Oval; 60”L x 27”W x 50”H, shipping weight 328 lbs.

P/N 901060 shown

P/N

901061

330 Gallon Oval, 72”L x 27”W x 50”H, shipping weight

369 lbs.

Round Storage Tanks:

Constructed from 12 gauge carbon steel with reel mounting plate, three 2” bung openings, lifting lug and a 1” drain. Legs are 2” x 2” x 1/8” angle iron. Finish is a light gray powder coat for improved durability.

P/N

901068-UL

500 Gallon Round; 45 1 ⁄

2

” Dia. x 74”L, shipping weight 455 lbs. UL Listed.

P/N

901076

300 Gallon Round; 37.75” Dia. x 62” L, shipping weight 250 lb.

P/N 901064 shown

Bench

Tanks:

Bench tanks are constructed from

12 gauge carbon steel with 3” channel bottom and 3” backsplash on three sides.

Tank has a 1” drain, three 2” bung openings and comes standard with a reel mounting plate.

P/N

901062

165 Gallon Bench; 36”L x 33”W x 33”H (39” high overall), shipping weight 225 lbs.

P/N

901063

225 Gallon Bench; 48”L x 33”W x 33”H (39” high overall), shipping weight 255 lbs.

P/N

901064

280 Gallon Bench; 60”L x 33”W x 33”H (39” high overall), shipping weight 285 lbs.

P/N

901060-CH

275 Gallon Used Oil Tank used for bulk storage has a convenient hatch opening with cover to allow filter elements to be drained prior to disposal. Tank has two 2” bung openings and one 3” bung opening, along with a

1” drain. Powder coat finish for durability.

Note: Contact Liquidynamics for availability of other tanks such as double wall or special sizes.

www.liquidynamics.com

51

STORAGE TANK ACCESSORIES

Level Gauges:

Simple, direct mechanical action ensures reliability and high visibility. These gauges are available for tanks up to 12 ft.

deep and can be used when mounting close to a tank wall.

Contact Liquidynamics for other sizes.

P/N

901053

Tank Gauge for 275 Gallon Oval Tank

P/N

901057

Tank Gauge for 33” Deep Bench Tanks

P/N

901058

Tank Gauge for 45

1

2

” Deep 500 Gallon Round Tanks

P/N

901056

Tank Gauge for 60” Deep Tower Tank and 275 Gallon Oval

Vertical

P/N

901058-38

Tank Gauge for 38” Deep 300 Gallon Round Tank

Fill Cap:

Loose-seal vented style cap with hinged cover. Fits 2” tank openings and may be locked with a padlock for security.

Construction is cast iron with a black lacquer finish.

P/N

901054

2” NPTM Fill Cap

Emergency Vent:

Emergency Vents (pressure relief only) are used on above ground tanks as a code requirement and helps prevent tanks from becoming over-pressurized and rupturing if exposed to fire, UL listed.

P/N

901946

3” Emergency Vent, 8 oz/sq in. opening pressure, with 59,900

CFH @ 2.5 PSI Venting Capacity,

UL Listed.

P/N

901948

4” Emergency Vent, 8 oz./sq. in. opening pressure, with 119,750

CFH @ 2.5 PSI venting capacity. UL Listed.

P/N

901055

The Pre-Vent Fill Cap is designed for use on small above ground gasoline, diesel and oil storage tanks. The primary purpose of this cap is to pressurize the storage tank and reduce evaporation loss and condensation.

The pressure cap valve opens at 2

1

2

PSI and the vacuum release opens at 1 1 ⁄

2 ounces. Threads are 2” NPTM.

P/N

900256

1/4” Quick Connect Air Coupler set

P/N

900283

3/8” Quick Connect Air Coupler set

P/N

900257

1/2” Quick Connect Air Coupler set

Thread Sealant

Designed for hydraulic and pneumatic systems up to 2” diameter. Sealant has excellent solvent resistance and a temperature range of –65° F to +300° F. Most importantly, it has a pressure rating of 10,000 PSI which allows it to be used on oil and grease systems. May also be disassembled with hand tools.

P/N

904001

50 ml bottle, enough for hundreds of fittings.

P/N

904003

250 ml bottle.

P/N

904002

0.5 ml tube, ideal for small jobs.

52

800.894.3572

AIR FILTERS, REGULATORS AND LUBRICATORS

Aluminum die cast construction provides a rugged housing that is compact and modular in design. Space requirements are reduced by combining the regulator and filter into one unit and incorporating the pressure gauge into the body.

These air regulators have a maximum operating input pressure of 150 PSI and a regulating pressure range of 7 to

120 PSI. The filter element is rated at 5 micron and should be changed yearly or when a pressure drop of 15 PSI is reached.

“High Pressure” air filter/regulators and lubricators are necessary when air pressure supplying these devices exceeds 150 PSI, which is the maximum pressure rating for the normal “Low Pressure” filter/regulators. This is the case if you are using a two stage air compressor which typically has a pressure of 220 – 250 PSI.

P/N

540235

Air filter/regulator lockout to prevent unauthorized adjustment of air pressure regulator. Uses any user supplied key or combination lock with a hasp diameter of 0.30” or less.

Note: Filter/regulator and lock not included.

P/N

540104-G

1/4” Mini Filter/Regulator/Lubricator combination - 250 PSI

This mini combo includes an air filter/regulator and mini lubricator, rated to 18 SCFM with a maximum air input pressure of 250 PSI.

P/N

540100-G

1/4” Mini Filter/

Regulator – 250 PSI

P/N

540103

1/4” Mini Lubricator – 250 PSI

Mini FRL Combo Unit - 150 PSI

Maximum 150 PSI input pressure. Recessed pressure gauge included, manual drain.

P/N

540200-G

1/4” Mini Filter/Regulator/Lubricator combination w/gauge

P/N

540203-G

3/8” Mini Filter/Regulator/Lubricator combination w/gauge

P/N

540112-G

3/8” Modular Filter/Regulator/

Lubricator – 250 PSI

Two unit combo air filter/regulator with lubricator provides excellent water removal efficiency and is rated to 40 SCFM with a maximum input pressure of

250 PSI.

P/N

540115-G

3/8” Modular Filter/

Regulator – 250 PSI

P/N

540111

3/8” Modular Lubricator – 250 PSI

Mini Filter/Regulator - 150 PSI

Maximum 150 PSI input pressure. Recessed pressure gauge included, manual drain.

P/N

540201-G

1/4” Filter/Regulator w/gauge

P/N

540204-G

3/8” Filter/Regulator w/gauge

P/N

540207-G

1/2” Filter/Regulator w/gauge

Individual components as shown above, maximum input pressure 150 PSI.

P/N

540202

1/4” Mini Lubricator

P/N

540205

3/8” Lubricator

P/N

540208

1/2” Lubricator

Ambient Air Dryers

Removes 99% of all free moisture and includes a built in automatic drain. Excellent solution for “problem” air supplies without the expense of refrigerant or desicant dryers.

Note: Does not lower dew point of air.

P/N

540300

1/4” Ambient Dryer

P/N

540301

3/8” Ambient Dryer

P/N

540302

1/2” Ambient Dryer

P/N

540303

3/4” Ambient Dryer www.liquidynamics.com

53

VALVES AND FAUCETS

Gate Valves

Available in cast iron or aluminum construction. Excellent for dispensing viscous products such as heavy oils, flowable greases, varnish and molasses from drums by gravity draining.

P/N

900226

3/4” Iron Gate Valve

P/N

900227

2” Iron Gate Valve

P/N

900228

3/4” Aluminum Gate Valve

P/N

900229

2” Aluminum Gate Valve

Drum Faucets

Constructed of polyethylene for excellent chemical resistance.

P/N

810202

3/4” Drum Faucet

P/N

810201

2” Drum Faucet

Self-Closing Drum Faucet

Zinc plated steel for improved corrosion resistance. For dispensing petroleum products, lacquers, varnishes, thinners and antifreeze from drums by gravity draining, 3/4” NPTM.

P/N

810233

P/N

900230

Radiator faucet with rubber spout, thumb operated control valve, 1/4” NPTF inlet thread with maximum operating pressure of 300 PSI.

Bung Wrench

Aluminum die-casting prevents sparks. Can be used for 3/4” and 2” bung closures.

P/N

810200

P/N

900234

Radiator faucet with aluminum spout, thumb operated control valve, 1/4” NPTF inlet thread, maximum operating pressure of 300 PSI.

1” Four-Way Reversing Valve

Simplifies plumbing and installation by eliminating the need for multiple valves typically found on waste oil systems.

Allows one pump to be used to fill waste oil tank as well as to empty it, has four 1” NPTF ports. Aluminum body with brass spool. Rated to 200 PSI, 4.75” Dia. x 4.5” H.

P/N

900372

Overfill Warning Valve for Waste Oil

Systems

Valve installs on 2” bung opening at top of waste oil tank, air supply is routed through valve before going to the pump.

Valve will close off pump air supply when liquid level reaches 90% of tank capacity diverting air to provide an audible signal.

P/N

100555-AS

54

800.894.3572

Isolation Valves:

VALVES AND FITTINGS

Low Pressure Ball Valves, for use with air and water applications. Rated to 600 PSI maximum working pressure, bronze construction.

P/N

900366

1/4” NPTF

P/N

900367

3/8” NPTF

P/N

900285

1/2” NPTF

P/N

900287

3/4” NPTF

P/N

900288

1” NPTF

P/N

900324

1/2” NPTF w/bleed-off

Medium Pressure Ball Valves, for use with oil systems.

Rated to 2,000 PSI maximum working pressure, carbon steel construction.

P/N

900286

1/2” NPTF

P/N

900299

3/4” NPTF

P/N

900371

1” NPTF

High Pressure Needle Valve, for use with grease systems. Rated to 10,000

PSI maximum working pressure, carbon steel construction.

P/N

900787

1/2” NPTF

P/N

900360

3/4” NPTF

Nipple - Reducing

Part No.

Thread Size

Male x Male, NPT

900382

1/4” x 1/8” NPT

900383

3/8”x 1/4” NPT

900384

1/2” x 1/4” NPT

900385

1/2” x 3/8” NPT

900386

3/4” x 1/2” NPT

900399

1” x 3/4” NPT

Reducing Bushings:

Part No.

Thread Size

Male x Female, NPT

900375

1/4” x 1/8” NPT

900361

3/8” x 1/4” NPT

900231

1/2” x 1/4” NPT

900376

1/2” x 3/8” NPT

900328

3/4” x 1/2” NPT

900377

1” x 1/2” NPT

900323

1” x 3/4” NPT

900365

1 1 ⁄

2

” x 1” NPT

900510

2” NPTM x 1/2” NPTF www.liquidynamics.com

Plug - Square Head

Part No.

Thread Size

NPT Male

900403

1/8” NPT

900265

1/4” NPT

900284

3/8” NPT

900404

1/2” NPT

900405

3/4” NPT

900406

1” NPT

Pipe Adapter:

Part No.

Thread Size

Female x Male, NPT

900391

1/4” x 1/8” NPT

900392

3/8” x 1/4” NPT

900393

1/2” x 1/4” NPT

900342

1/2” x 3/8” NPT

900394

3/4” x 1/2” NPT

900398

1” x 3/4” NPT

Elbow

Part No.

Thread Size

Male x Female, NPT

900387

1/4” x 1/4” NPT

900388

3/8” x 3/8” NPT

900262

1/2” x 1/2” NPT

900389

3/4” x 3/4” NPT

900390

1” x 1” NPT

900417

1” x 1” NPTF both ends

Nipple - Standard

Part No.

Thread Size

Male x Male, NPT

900232

1/4” x 1/4” NPT

900313

3/8” x 3/8” NPT

900314

1/2” x 1/2” NPT

900397

3/4” x 3/4” NPT (close)

900396

1” x 1” NPT (close)

Coupler

Part No.

Thread Size

Female x Female, NPT

900223

1/4” x 1/4” NPT

900401

3/8” x 3/8” NPT

900327

1/2” x 1/2” NPT

900402

3/4” x 3/4” NPT

901036

1” x 1” NPT

55

Plastic Measures

Transparent high density polyethylene construction with flex spout, cap and lid to prevent contamination. Scale molded on both sides for improved accuracy and visibility.

P/N

810240

1 Quart Pitcher

P/N

810241

2 Quart Pitcher

P/N

810244

5 Quart Pitcher

P/N

950010

Combo Kit includes 5qt.

Pitcher and 7” Funnel.

MEASURES AND FUNNELS

Plastic Funnels

Molded from high density polyethylene. Complete with flex spout, threaded cap, lid and screen filter.

P/N

810253

7” diameter funnel

P/N

810254

9” diameter funnel

P/N

810230-5

5 Quart flow control measure features one hand operation, bottom discharge and “lock open” thumb flow control. Has extra long flexible spout, steel construction with black enamel finish.

Note: Contact

Liquidynamics for additional sizes.

P/N

810261

10” diameter drain funnel screws securely to 2” drum or tank openings. Allows rapid filling without danger of funnel tipping over. Hinged cover prevents contamination and may be pad locked. 3.5 quart capacity.

Super Funnel

Five inch diameter funnel with tapered rigid length of 18”.

High density polyethylene construction.

P/N

810271

Transmission Funnel

Six inch funnel with a 13” flexible spout. High density polyethylene construction.

P/N

810270

3 Piece Funnel Set

Sizes include 1 ea. 2 quart, 1 pint and

1/2 pint funnels. High density polyethylene construction.

P/N

810272

Super Funnel

Eliminate overspills while pouring. Large surface area permits drainage of multiple containers simultaneously.

Highly durable, it will resist rust, dents and chemicals and will give many years of trouble free service. Fits all types of 55 gallon drums.

P/N

2400-14

56

800.894.3572

SPRING REWIND HOSE REELS

A great tool for the modern workplace. Provides for a safer, cleaner and more efficient working environment.

Constructed of heavy gauge steel with a high density polypropylene hose drum for durability. These reels are extremely rugged and intended for heavy duty use.

Metal enclosure protects hose from dirt, UV and damage

Optional swivel mount available

Available in open and enclosed configurations

"Tempered" spring is containerized for easy and safe replacement

Rugged fiber reinforced polyethylene hose drum will not chip, dent or rust

Unique "Slip-On" mounting makes installation simple

Easy access swivel may be serviced without dismounting reel

Sturdy and durable "non-pinch" hose guide

Large capacity drum accepts up to 50 ft. of

1/2" hose

Rugged hose stop (P/N S45007) provided as standard equipment www.liquidynamics.com

57

SPRING REWIND HOSE REELS – OIL

Open Reel, 43002 and 43003 Series:

An excellent tool to ensure a clean, efficient and safe working environment. These reels are constructed of heavy gauge, powder coated steel with a high density polypropylene hose drum to ensure durability and corrosion resistance. Reels have double pedestal and double arm construction for rigidity. Easy access inlet swivel design utilizes “quad” seals with PTFE backup and secondary ‘O’ Ring to ensure long life. Hose guide arms are adjustable to allow bench, wall or ceiling mounting.

Both open and enclosed reel styles are supplied standard with rigid, fixed mounts. An optional swivel mount bracket is available for both the open and enclosed reel styles.

Reels are supplied complete with ball stop and 1/2” x 2' connecting hose. Maximum vertical mounting height is 12’.

Contact Liquidynamics if higher mounting height is required.

Compact Hose Reel:

P/N

43003-25L

This compact reel offers heavy duty steel construction with corrosion resistant powder coated finish, fully enclosed with lubricated spring and full flow swivel to minimize pressure drop. The hose guide arm is easily adjusted to allow wall, ceiling or floor mounting.

8.5”

4.25”

15”

Mounting Pattern

Common both reels.

6.75”

P/N

43002

8.5”

4.25”

19”

4.75”

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

Connecting Hose Length

Shipping Weight, lb.

P/N 43002 P/N 43002-25L P/N 43002-30L P/N 43002-40L P/N 43002-50L P/N 43003 P/N 43003-25L

1,700 PSI

1,700 PSI

25 ft.

1,700 PSI

30 ft.

1,700 PSI

40 ft.

1,700 PSI

50 ft.

1,700 PSI

1,700 PSI

25 ft.

— 1/2” 1/2” 1/2” 1/2” — 1/2”

1/2” NPTF 1/2” NPTF 1/2” NPTF 1/2” NPTF 1/2” NPTF 1/2” NPTF 1/2” NPTF

1/2” NPTF 1/2” NPTM 1/2” NPTM 1/2” NPTM 1/2” NPTM 1/2” NPTM 1/2” NPTM

— 2 ft.

2 ft.

2 ft.

2 ft.

— 2 ft.

28

Note: See page 71 for reel mounting kits.

37 38 40 43 26 34

58

800.894.3572

SPRING REWIND HOSE REELS – OIL

Enclosed Reel, 44002 Series:

The 44002 series enclosed reel provides hose protection from dirt, UV and physical damage as well as improved aesthetics.

Enclosed reels are easy to mount via a unique “slip–on” reel mounting system. Additionally, these reels provide simple maintenance via an easy access swivel, which can be serviced without dismounting the reel. The tempered, containerized spring allows quick and safe replacement. Reels are supplied complete with hose stop and 1/2” x 2’ jumper hose.

8.75”

5.5”

21”

Mounting Pattern

6.75”

4.75”

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

P/N 44002

1,700 PSI

1/2” NPTF

1/2” NPTF

3/8” Max. Winding Capacity 60 ft.

1/2” Max. Winding Capacity 50 ft.

Connecting Hose Length

Shipping Weight, lb.

38

P/N 44002-25L

1,700 PSI

25 ft.

1/2”

1/2” NPTF

1/2” NPTM

2 ft.

47

P/N 44002-30L

1,700 PSI

P/N 44002-40L

1,700 PSI

30 ft.

1/2”

40 ft.

1/2”

1/2” NPTF 1/2” NPTF

1/2” NPTM 1/2” NPTM

2 ft.

48

2 ft.

51

P/N 44002-50L

1,700 PSI

50 ft.

1/2”

1/2” NPTF

1/2” NPTM

—’

2 ft.

52 www.liquidynamics.com

59

SPRING REWIND HOSE REELS – OIL

Spring Rewind Hose Reels – Large Capacity:

These large capacity hose reels are ideal for use with 1/2” hose up to 75’, 3/4” hose up to 50’ lengths and 1” hose with lengths up to 40’. They are compact, sturdy and versatile. Reels are constructed from heavy gauge steel with full double pedestal and double arm supports for rigidity and powder coated for durability. Support arm is easily adjusted to allow installation on ceiling, wall, floor or bench without binding hose. Hose ball stop included.

P/N 88402-40L

(shown)

88402 and 88403 Series

11

3

4

23 1 ⁄

2

6”

88405 Series

14”

7 1 ⁄

2

P/N 88405-40L

(shown)

23 1 ⁄

2

11 1 ⁄

2

9 1 ⁄

2

7

1

2

9

1

2

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

P/N 88403-50L P/N 88403-75L P/N 88402 P/N 88402-40L P/N 88402-50L P/N 88405 P/N 88405-30L P/N 88405-40L

1,160 PSI

50 ft.

1/2”

1/2” NPTF

1/2” NPTF

1,160 PSI

75 ft.

1/2”

1/2” NPTF

1/2” NPTF

1,160 PSI

3/4” NPTF

3/4” NPTF

Max Winding Capacity 1/2” x 75’ 1/2” x 75’ 3/4” x 50’

Connecting Hose 2 ft.

2 ft.

—-

1,160 PSI

40 ft.

3/4”

3/4” NPTF

3/4” NPTF

See Note

870 PSI

50 ft.

3/4”

See Note

1,160 PSI 1,160 PSI

—-

3/4” NPTF 1” NPTF

3/4” NPTF 1” NPTF

1” x 40’

—-

30 ft.

1”

1” NPTF

1” NPTF

See Note

1,160 PSI

40 ft.

1”

1” NPTF

1” NPTF

See Note

Shipping Weight 70 lb 76 lb 62 lb 78 lb

Note: Order connecting hose separately to fit your specific installation

86 lb 74 lb 84 lb 96 lb

60

800.894.3572

SPRING REWIND HOSE REELS – EXTREME DUTY

These reels are intended for industrial applications where an extra heavy duty reel is required. Reels are constructed from thick gauge, powder coated steel with full double pedestal drum supports.

Drum shaft is 3/4” diameter supported by ball bearings on each side. Inlet swivel is machined solid brass with easily accessible seals for simple maintenance.

46200 series reels are supplied complete with ball stop and connecting hose.

46200 Series

11 1 ⁄

4

8 3 ⁄

4

5 1 ⁄

2

24”

3 1 ⁄

2

12 5 ⁄

8

3 3 ⁄

4

9 1 ⁄

4

P/N 46200-75L

(shown)

5 3 ⁄

4

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

P/N 46200

1,700 PSI

1/2” NPTF

1/2” NPTF

1/2” Max. Winding Capacity 80 ft.

1” Max. Winding Capacity —

Connecting Hose Length

Shipping Weight, lb.

66

P/N 46200-50L

1,700 PSI

50 ft.

1/2”

1/2” NPTF

1/2” NPTM

2 ft.

81

Note: Order connecting hose separately to fit your specific installation

P/N 46200-75L

1,700 PSI

75 ft.

1/2”

1/2” NPTF

1/2” NPTM

2 ft.

87

46500 Series

16 1 ⁄

2

13 1 ⁄

4

10”

24”

13 1 ⁄

2

P/N 46500

1,160 PSI

1” NPTF

1” NPTM

45 ft.

66

3 1 ⁄

2

P/N 46501-50L

1,160 PSI

50 ft.

3/4”

1” NPTF

3/4” NPTM

See Note

94

P/N 46502-40L

1,160 PSI

40 ft.

1”

1” NPTF

1” NPTM

See Note

96

12 5 ⁄

8

3 3 ⁄

4

5 1 ⁄

4

” 5 1 ⁄

4

” www.liquidynamics.com

61

SPRING REWIND HOSE REELS – GREASE

Open Reel, 43102, 43103 and 43104 Series:

An excellent tool to ensure a clean, efficient and safe working environment. These reels are constructed of heavy gauge, powder coated steel with a high density polypropylene hose drum to ensure durability and corrosion resistance. Reels have double pedestal and double arm construction for rigidity. Easy access inlet swivel design utilizes “quad” seals with PTFE backup and secondary ‘O’ Ring to ensure long life. Hose guide arms are adjustable to allow bench, wall or ceiling mounting.

Both open and enclosed reel styles are supplied standard with rigid, fixed mounts. An optional swivel mount bracket is available for both the open and enclosed reel styles.

Reels are supplied complete with ball stop and connecting hose.

8.5”

4.25”

15”

Compact Hose Reel:

P/N

43104

This compact reel offers heavy duty construction with corrosion resistant powder coated finish, fully enclosed and lubricated spring and full flow swivel to minimize pressure drop. The hose guide arm is easily adjusted to one of 9 positions to allow wall, ceiling or floor mounting.

8.25”

4.25”

19”

Mounting Pattern

Common both reels.

6.75”

62

4.75”

P/N 43102 shown

P/N 43102 P/N 43102-30G P/N 43102-50G P/N 43103-30G P/N 43103-50G P/N 43104 P/N 43104-25G

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

8,700 PSI 8,700 PSI 8,700 PSI 8,700 PSI 8,700 PSI 8,700 PSI 8,700 PSI

— 30 ft.

50 ft.

30 ft.

50 ft.

— 25 ft.

— 1/4” 1/4” 3/8” 3/8” — 1/4”

1/4” NPTF 1/4” NPTF 1/4” NPTF 1/4” NPTF 1/4” NPTF 1/4” NPTF 1/4” NPTF

Outlet Connection 1/4” NPTM 1/4” NPTM 1/2” NPTF 1/4” NPTM 1/4” NPTM 1/4” NPTM 1/4” NPTM

1/4” Max. Winding Capacity 65 ft.

— — — — 40 ft.

3/8” Max. Winding Capacity 65 ft.

Connecting Hose Length —

Shipping Weight, lb.

28

2 ft.

35

2 ft.

40

2 ft.

40

2 ft.

45

40 ft.

26

2 ft.

33

800.894.3572

SPRING REWIND HOSE REELS – ENCLOSED DRUM – GREASE

Enclosed Reel, 44100 Series:

The 44100 series enclosed reel provides hose protection from dirt, UV and physical damage as well as improved aesthetics.

Enclosed reels are easy to mount via a unique “slip–on” reel mounting system. Additionally, these reels provide simple maintenance via an easy access swivel, which can be serviced without dismounting the reel. The tempered, containerized spring allows quick and safe replacement. Reels are supplied complete with hose stop and jumper hose.

8.75”

6.5”

5.5”

21”

Mounting Pattern

6.75”

4.75”

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

1/4” Max. Winding Capacity

3/8” Max. Winding Capacity

Connecting Hose Length

Shipping Weight, lb.

P/N 44102

8,700 PSI

1/4” NPTF

1/2” NPTF

65 ft.

65 ft.

39

P/N 44102-30G

8,700 PSI

P/N 44102-50G P/N 44103-30G

8,700 PSI 8,700 PSI

30 ft.

1/4”

50 ft.

1/4”

1/4” NPTF 1/4” NPTF

1/4” NPTM 1/4” NPTM

30 ft.

3/8”

P/N 44103-50G

8,700 PSI

50 ft.

3/8”

1/4” NPTF 1/4” NPTF

1/4” NPTM 1/4” NPTM

2 ft.

47

2 ft.

52

2 ft.

52

2 ft.

57 www.liquidynamics.com

63

HOSE REELS – EXTREME DUTY – GREASE

These reels are intended for extreme applications where an extra heavy duty reel is required. Reels are constructed from thick gauge, powder coated steel with full double pedestal drum supports.

Drum shaft is 3/4” diameter supported by ball bearings on each side. Inlet swivel is machined solid brass with easily accessible seals for simple maintenance.

Reels are supplied complete with ball stop and connecting hose.

11 1 ⁄

4

8 3 ⁄

4

5 1 ⁄

2

3 1 ⁄

2

12 5 ⁄

8

3 3 ⁄

4

9 1 ⁄

4

24”

5 3 ⁄

4

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

1/4” Max. Winding Capacity

3/8” Max. Winding Capacity

Connecting Hose Length

Shipping Weight, lb.

P/N 46202-75G

(shown)

P/N 46201

8,700 PSI

P/N 46201-50G P/N 46201-75G P/N 46202-50G P/N 46202-75G

8,700 PSI 8,700 PSI 8,700 PSI 8,700 PSI

50 ft.

1/4”

75 ft.

1/4”

50 ft.

3/8”

75 ft.

3/8”

3/8” NPTF 3/8” NPTF 3/8” NPTF 3/8” NPTF 3/8” NPTF

1/2” NPTF 1/4” NPTM 1/4” NPTM 1/4” NPTM 1/4” NPTM

80 ft.

80 ft.

66

2 ft.

79

2 ft.

84

2 ft.

84

2 ft.

89

64

800.894.3572

SPRING REWIND HOSE REELS – OPEN DRUM – AIR/WATER

Open Reel, 43002 and 43003 Series:

An excellent tool to ensure a clean, efficient and safe working environment. Liquidynamics reels are constructed of heavy gauge, powder coated steel with a high density polypropylene hose drum to ensure durability and corrosion resistance. These reels are extremely rugged and are intended for heavy duty use. Both open and enclosed styles are supplied with a standard rigid fixed mount. An optional swivel mount bracket is available for both the open and enclosed reel styles.

Reels are supplied complete with ball stop and connecting hose. Maximum vertical mounting height is 12’. Contact

Liquidynamics if higher mounting height is required.

8.5”

Compact Hose Reel:

P/N

43003-30A

This compact reel offers heavy duty steel construction with corrosion resistant powder coated finish.

Fully enclosed and lubricated spring and full flow swivel to minimize pressure drop. The hose guide arm is easily adjusted to one of 9 positions to allow wall, ceiling or floor mounting.

4.25”

15”

Mounting Pattern

Common both reels.

6.75”

P/N

43002

8.5”

4.25”

19”

4.75”

P/N 43002 shown

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

Connecting Hose Length

Shipping Weight, lb.

P/N 43002

1,160 PSI

P/N 43002-30A P/N 43002-50A

250 PSI

30 ft.

250 PSI

50 ft.

P/N 43003

1,160 PSI

P/N 43003-30A P/N 43003-50A

250 PSI

30 ft.

250 PSI

50 ft.

1/2” NPTF

3/8”

1/2” NPTF

3/8”

1/2” NPTF

1/2” NPTF

3/8”

3/8” NPTF

1/2” NPTF 1/2” NPTM 1/2” NPTM 1/2” NPTM 3/8” NPTF

— 2 ft.

2 ft.

— 2 ft.

28 34 37 27 32

3/8”

3/8” NPTF

3/8” NPTF

2 ft.

38 www.liquidynamics.com

65

SPRING REWIND HOSE REELS – ENCLOSED DRUM – AIR/WATER

Enclosed Reel, 44002 Series:

8.75”

21”

5.5”

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

Shipping Weight, lb.

P/N 44002

1,160 PSI

1/2” NPTF

1/2” NPTF

3/8” Max. Winding Capacity 60 ft.

Connecting Hose Length —

39

P/N 44002-30A P/N 44002-50A

250 PSI

30 ft.

3/8”

1/2” NPTF

3/8” NPTM

2 ft.

46

250 PSI

50 ft.

3/8”

1/2” NPTF

3/8” NPTM

2 ft.

49

Large Capacity, 88403 Series:

Mounting Pattern

6.75”

4.75”

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

Shipping Weight, lb.

P/N 88403

1,160 PSI

1/2” NPTF

1/2” NPTF

3/8” Max. Winding Capacity 80 ft.

Connecting Hose Length —

62

P/N 88403-50A P/N 88403-75A

250 PSI

50 ft.

1/2”

1/2” NPTF

1/2” NPTM

2 ft.

68

250 PSI

75 ft.

1/2”

1/2” NPTF

1/2” NPTM

2 ft.

74

11

3

4

6”

23 1

2

P/N 88403-50A

(shown)

66

800.894.3572

SPRING REWIND HOSE REELS – AIR/WATER

Extreme Duty 46200 Series:

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

1/2” Max. Winding Capacity 80 ft.

Connecting Hose Length —

Shipping Weight, lb.

46200 46200-50A

1,160 PSI

1/2” NPTF

1/2” NPTF

66

250 PSI

50 ft.

1/2”

1/2” NPTF

1/2” NPTM

2 ft.

76

46200-75A

250 PSI

75 ft.

1/2”

1/2” NPTF

1/2” NPTM

2 ft.

81

P/N 46200-75A

(shown)

Stainless Steel 47400 and 47500 Series:

P/N 47502-75

(shown)

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

Outlet Connection

47400 47400-30

2,900 PSI

1/2” NPTF

1/2” NPTF

3/8” Max. Winding Capacity 60 ft.

1/2” Max. Winding Capacity 50 ft.

2,900 PSI

30 ft.

3/8”

1/2” NPTF

1/2” NPTM

47400-50

2,900 PSI

50 ft.

3/8”

1/2” NPTF

1/2” NPTM

Connecting Hose Length

Shipping Weight, lb.

28

2 ft.

40

2 ft.

45

47500 47501-75 47502-50 47502-75

2,900 PSI 2,900 PSI 2,900 PSI 2,900 PSI

75 ft.

3/8”

50 ft.

1/2”

75 ft.

1/2”

1/2” NPTF 1/2” NPTF 1/2” NPTF 1/2” NPTF

1/2” NPTF 1/2” NPTM 1/2” NPTM 1/2” NPTM

60 ft.

80 ft.

66

2 ft.

89

2 ft.

76

2 ft.

87 www.liquidynamics.com

67

SPRING REWIND HOSE REELS – FUEL

Spring Rewind Hose Reels – Large Capacity:

These large capacity hose reels are ideal for use with 3/4” hose up to 50’ lengths and 1” hose with lengths up to 40’. They are compact, sturdy and versatile. Reels are constructed from heavy gauge steel with full double pedestal and double arm supports for rigidity and powder coated for durability. Support arm is easily adjusted to allow installations on ceiling, wall, floor or bench without binding of hose. Hose ball stop included.

Diesel 88000

Series:

P/N 88402-50D

(shown)

9

1

2

Working Pressure

Hose Length

Hose Dia., ID

Inlet Connection

88402 88402-40D 88402-50D

870 PSI

150 PSI

40 ft.

150 PSI

50 ft.

88405

870 PSI

88405-30D 88405-40D

150 PSI

30 ft.

150 PSI

40 ft.

— 3/4” 3/4” — 1” 1”

3/4” NPTF 3/4” NPTF 3/4” NPTF 1” NPTF 1” NPTF 1” NPTF

Outlet Connection 3/4” NPTF 3/4” NPTM 3/4” NPTM 1” NPTM 1” NPTM 1” NPTM

Max. Winding Capacity 3/4” x 50’ — — 1” x 40’ — —

Connecting Hose

Shipping Weight, lb.

62

Note

78

Note

86

74

Note

84

Note

96

P/N 88402

11

3

4

6”

23 1 ⁄

2

14”

7 1 ⁄

2

Note: Order connecting hose separately to fit your specific installation.

P/N 88405

11 1 ⁄

2

7

1

2

9

1

2

These reels are intended for industrial applications where an extra heavy duty reel is required. Reels are constructed from thick gauge, powder coated steel with full double pedestal drum supports.

Drum shaft is 3/4” diameter supported by ball bearings on each side. Inlet swivel is machined solid brass with easily accessible seals for simple maintenance.

46000 series reels are supplied complete with ball stop.

46500 46504-25D

Diesel Reel,

46000 Series:

Working Pressure

Hose Length

1,160 PSI

Hose Dia., ID

Inlet Connection

1” NPTF

Outlet Connection 1” NPTF

Connecting Hose Length —

Shipping Weight, lb.

66

150 PSI

25 ft.

46504-50D

150 PSI

50 ft.

3/4”

1” NPTF

3/4”

1” NPTF

3/4” NPTM 3/4” NPTM

Note Note

82 94

46505-25D

150 PSI

25 ft.

1”

1” NPTF

1” NPTM

Note

84

46505-40D

150 PSI

40 ft.

1”

1” NPTF

1” NPTM

Note

96

11 1 ⁄

4

8 3 ⁄

4

5 1 ⁄

2

24”

Note: Order connecting hose separately to fit your specific installation.

9 1 ⁄

4

P/N 46504-50D

(shown)

3 1 ⁄

2

12 5 ⁄

8

3 3 ⁄

4

5 3 ⁄

4

68

800.894.3572

FLUID AND AIR HOSES – LOW & MEDIUM PRESSURE

These hoses are suitable for use with Air, Water, Oil, Hydraulic Fluid, Transmission Fluid and Antifreeze as appropriate. Hoses are typically supplied with a rigid fitting on one side and a swivel fitting on the other side.

Please contact Liquidynamics if you require a special hose type, length or fittings

LOW PRESSURE AIR AND WATER HOSE

A premium high quality multi-purpose hose that is an excellent choice for air and water applications. The hose is constructed with high tensile textile cord reinforcement and a red neoprene cover. This construction provides excellent kink resistance, a working pressure of 300 PSI, a 4:1 safety factor and a temperature range of -20˚ F to +212˚ F.

81125-30

81125-40

81125-50

81150-02

81150-04

81150-06

81150-10

81150-15

81150-25

81150-30

81150-40

81150-50

81150-75

P/N

81100-02

81100-04

81100-06

81100-10

81100-15

81100-25

81100-30

81100-40

81100-50

81125-02

81125-04

81125-06

81125-10

81125-15

81125-25

HOSE SIZE

3/8” x 2’

3/8” x 4’

3/8” x 6’

3/8” x 10’

3/8” x 15’

3/8” x 25’

3/8” x 30’

3/8” x 40’

3/8” x 50’

3/8” x 2’

3/8” x 4’

3/8” x 6’

3/8” x 10’

3/8” x 15’

3/8” x 25’

FITTINGS

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 30’

3/8” x 40’

3/8” x 50’

1/2” x 2’

1/2” x 4’

1/2” x 6’

1/2” x 10’

1/2” x 15’

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 25’

1/2” x 30’

1/2” x 40’

1/2” x 50’

1/2” x 75’

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

(A) NPTM Rigid fitting x NPTM Swivel fitting

LOW PRESSURE OIL HOSE 3/4” & 1” ID

For use with Double Diaphragm Pumps.

A good multi-purpose hose for applications requiring maximum flexibility with good resistance to air, water and oils. Construction is a type “B” elastomer with high tensile textile cord reinforcement with an operating temperature range of -40˚ F to +200˚ F. Outside diameter is 1.15” (3/4”), 1.47” (1”) and has a maximum working pressure of 250 PSI and a maximum suction of 20” Hg.

Minimum bend radius is 5”.

P/N

81225-02

81225-04

81225-06

81225-25

81225-30

81225-40

81225-50

81230-02

81230-04

81230-06

81230-25

81230-30

81230-35

81230-40

81230-50

HOSE SIZE

3/4” x 2’

3/4” x 4’

3/4” x 6’

3/4” x 25’

3/4” x 30’

3/4” x 40’

3/4 “x 50’

1” x 2’

1” x 4’

1” x 6’

1” x 25’

1” x 30’

1” x 35’

1” x 40’

1” x 50’

FITTINGS

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 1” (A)

3/4” x 1” (A)

3/4” x 1” (A)

1” x 1” (A)

1” x 1”

1” x 1”

1” x 1”

1” x 1”

1” x 1”

1” x 1”

1” x 1”

(A)

(A)

(A)

(A)

(A)

(A)

(A)

(A) NPTM Rigid fitting x NPTM Swivel fitting

MEDIUM PRESSURE OIL HOSE 1/2” ID

For use with all ratio pumps up to and including 13:1 pumps.

An excellent general purpose hose used for oil, hydraulic fluid, transmission fluid and antifreeze. Hose is constructed with a neoprene tube, high tensile steel wire braid and oil and weather resistant synthetic rubber. Hose is rated to a maximum working pressure of 2,500 PSI and a minimum burst of

10,000 PSI and has a temperature range of -40˚ F to +250˚ F. The hose is

SAE/USCG marine listed and exceeds SAE 100R1 specifications. It is very flexible with a minimum bend radius of 3.0 inches, OD is 0.75”. Hose may be used for suction or discharge.

P/N

81200-02

81200-04

81200-05

81200-06

81200-08

81200-12

81200-15

81200-20

81200-25

81200-30

81200-35

81200-40

81200-45

81200-50

81200-75

81200-100

HOSE SIZE

1/2” x 2’

1/2” x 4’

1/2” x 5’

1/2” x 6’

1/2” x 8’

1/2” x 12’

1/2” x 15’

FITTINGS

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 20’

1/2” x 25’

1/2” x 30’

1/2” x 35’

1/2” x 40’

1/2” x 45’

1/2” x 50’

1/2” x 75’

1/2” x 1/2”

1/2” x 1/2” (A)

1/2” x 1/2”

1/2” x 1/2” (A)

1/2” x 1/2”

(A)

(A)

(A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 1/2” (A)

1/2” x 100’ 1/2” x 1/2” (A)

(A) NPTM Rigid fitting x NPTM Swivel fitting

MEDIUM PRESSURE OIL HOSE 3/4” & 1” ID

For use with High Volume Ratio Pumps.

An excellent general purpose hose used for oil, hydraulic fluid, transmission fluid and antifreeze. Hose is constructed with a neoprene tube, high tensile steel wire braid and oil and weather resistant synthetic rubber. Hose is rated to a maximum working pressure of 1,250 PSI and a minimum burst of

5,000 PSI and has a temperature range of -40˚ F to +250˚ F. The hose is

SAE/USCG marine listed and exceeds SAE 100R1 specifications. It is very flexible with a minimum bend radius of 4.3” inches, OD is 1.01”. Hose may be used for suction or discharge.

P/N

81250-02

81250-04

81250-06

81250-12

81250-20

81250-25

81250-30

81250-40

81250-50

81260-02

81260-04

81260-06

81260-12

81260-20

81260-25

81260-30

81260-40

81260-50

HOSE SIZE

3/4” x 2’

3/4” x 4’

3/4” x 6’

3/4” x 12’

3/4” x 20’

3/4” x 25’

3/4” x 30’

3/4” x 40’

3/4” x 50’

1” x 2’

1” x 4’

1” x 6’

1” x 12’

1” x 20’

1” x 25’

1” x 30’

1” x 40’

1” x 50’

FITTINGS

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

1” x 1” (A)

1” x 1”

1” x 1”

1” x 1”

1” x 1”

1” x 1”

1” x 1”

1” x 1”

1” x 1”

(A)

(A)

(A)

(A)

(A)

(A)

(A)

(A)

(A) NPTM Rigid fitting x NPTM Swivel fitting www.liquidynamics.com

69

GREASE HOSE & FUEL HOSE

These hoses are suitable for use with Hydraulic Fluid and Grease. Hoses are typically supplied with a rigid fitting on one side and a swivel fitting on the other side.

Please contact Liquidynamics if you require a special hose type, length or fittings

HIGH PRESSURE HOSE

For use with 60:1 Grease Pumps.

High pressure hose used for grease and hydraulic fluid transfer. Hose is constructed with a neoprene tube, two high tensile strength wire braids and

MSHA approved oil and weather resistant synthetic rubber cover, (3/8” hose has a polyester tube and neoprene cover). Maximum working pressure for the 1/4” ID hose is 5,000 PSI with a minimum burst pressure of 20,000

PSI, while the 3/8” ID hose has a maximum working pressure of 4,000 PSI and a minimum bursting pressure of 16,000 PSI. High pressure hoses are flexible, with a minimum bend radius of 2.0” and 6.0” respectively.

Hoses have a working temperature of -40˚ F to +212˚ F and are SAE/USCG marine listed.

81301-50

81301-60

81315-02

81315-04

81315-06

81315-12

81315-20

81315-25

81315-30

81315-40

81315-50

81315-60

81316-25

81316-30

81316-40

81316-50

P/N

81300-02

81300-04

81300-05

81300-06

81300-08

81300-12

81300-15

81300-20

81300-25

81300-30

81300-40

81300-50

81301-25

81301-30

81301-40

HOSE SIZE

1/4”x 2’

1/4”x 4’

1/4”x 5’

1/4”x 6’

1/4”x 8’

1/4” x 12’

1/4” x 15’

1/4” x 20’

1/4” x 25’

1/4” x 30’

1/4” x 40’

1/4” x 50’

1/4” x 25’

1/4” x 30’

1/4” x 40’

1/4” x 50’

1/4” x 60’

3/8” x 2’

3/8” x 4’

3/8’ x 6’

3/8” x 12’

3/8” x 20’

3/8” x 25’

3/8” x 30’

3/8” x 40’

3/8” x 50’

3/8” x 60’

3/8” x 25’

3/8” x 30’

3/8” x 40’

3/8” x 50’

FITTINGS

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 1/4” (A)

1/4” x 9/16” (B)

1/4” x 9/16” (B)

1/4” x 9/16” (B)

1/4” x 9/16” (B)

1/4” x 9/16” (B)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 3/8” (A)

3/8” x 9/16” (B)

3/8” x 9/16” (B)

3/8” x 9/16” (B)

3/8” x 9/16” (B)

81317-06

81317-12

81317-20

81317-50

1/2” x 6’

1/2” x 12’

1/2” x 20’

1/2” x 50’

1/2”

1/2”

1/2”

1/2”

81318-06

81318-12

3/4” x 6’

3/4” x 12’

3/4”

3/4”

81318-20 3/4” x 20’ 3/4”

(A) NPTM Rigid fitting x NPTM Swivel fitting

(C)

(C)

(C)

(C)

(C)

(C)

(C)

(B) NPTM Rigid fitting x 18 JICV fitting

(C) NPTM Rigid fitting both ends, 10,000 PSI Working Pressure

GROUNDED FUEL HOSE

For use with Electric Fuel Pumps and U.L. Approved D.D. Pumps.

Single wire braid construction provides the flexibility of a softwall and the durability of a hardwall and is resistant to crushing, cuts, abrasions, sun and weather. This hose is compatible with leaded and unleaded gasoline, gasohol and diesel fuel. Tubing is black nitrile with black nitrile / PVC cover and has a single wire braid with solid brass couplings for positive grounding. Temperature range is -40˚ F to +180˚ F and a working pressure of 150 PSI.

P/N

82400-06

82400-10A

82400-12

82400-12A

82400-20A

82400-25

82400-30

82400-35

82400-40

82400-50

82410-06

82410-10

82410-10A

82410-12A

82410-25

82410-25A

82410-30

82410-35

82410-40

82410-50

HOSE SIZE

3/4” x 6’

3/4” x 10’

3/4” x 12’

3/4” x 12’

3/4” x 20’

3/4” x 25’

3/4” x 30’

3/4” x 35’

3/4” x 40’

3/4” x 50’

1” x 6’

1” x 10’

1” x 10’

1” x 12’

FITTINGS

3/4” x 3/4” (A)

3/4” x 3/4” (D)

3/4” x 3/4” (A)

3/4” x 3/4” (D)

3/4” x 3/4” (D)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

3/4” x 3/4” (A)

1” x 1”

1” x 1”

1” x 1”

1” x 1”

(A)

(A)

(D)

(D)

1” x 25’

1” x 25’

1” x 30’

1” x 35’

1” x 1”

1” x 1”

1” x 1”

1” x 1”

(A)

(D)

(A)

(A)

1” x 40’

1” x 50’

1” x 1”

1” x 1”

(A)

(A)

(A) NPTM Rigid fitting x NPTM Swivel fitting

(D) NPTM Rigid fitting both ends

NON GROUNDED FUEL HOSE

For use with Gravity or Hand Operated Equipment.

A quality hose designed for gravity flow applications for use in agricultural and construction sites. Hose has a working pressure of 75 PSI with a 2 spiral polyester yarn construction and Nitrile / PVC cover.

P/N

82450-08

82450-10

82450-12

82450-15

82450-20

82460-08

82460-10

82460-12

82460-15

82460-20

HOSE SIZE

3/4” x 8’

3/4” x 10’

3/4” x 12’

3/4” x 15’

3/4” x 20’

1” x 8’

1” x 10’

FITTINGS

3/4”

3/4”

3/4”

3/4”

3/4”

1”

1”

1” x 12’

1” x 15’

1”

1”

1” x 20’ 1”

(D) NPTM Rigid fitting both ends

(D)

(D)

(D)

(D)

(D)

(D)

(D)

(D)

(D)

(D)

70

800.894.3572

REEL ACCESSORIES

Hose Reel Mounting Channel Kit

Reel mounting kits secure the 43002, 43003 and 44002 reels to “I” beams without having to drill any holes. Will fit “I” beams with flanges up to 7” wide.

Kits are available for mounting 1 to 3 reels. For reel banks over 3 reels, use multiple channels, i.e. for 6 reel bank, use two 950043 reel kits.

P/N

950041

1 Reel Mounting Kit

P/N

950042

2 Reel Mounting Kit

P/N

950043

3 Reel Mounting Kit

Swivel Mount Kit

P/N

950091

Swivel mount bracket adapts rigid mount open and enclosed reels to swivel mount, for P/N 43002, 43003 and 44002 series reels.

Product Service Labels

Product service labels (3/4” x 4 1 ⁄

4

”) are used to identify type of product being dispensed from a reel, control handle or meter. Labels are engraved brass for durability and provided with mounting hardware for the specific product label listed.

P/N

902010

Motor Oil

P/N

902011

Synthetic Oil

P/N

902012

Gear Lube

P/N

902013

ATF

P/N

902014

Hydraulic Oil

P/N

902015

Air

P/N

902016

Water

P/N

902017

Antifreeze

P/N

902018

Grease

P/N

902019

Evacuation

P/N

902020

Waste Oil

Note: Custom labels are available upon request. Please call for availability.

P/N

42015

Wall mounted drip tray. Used to retain control handle and catch the occasional drip. Catch tray is easily removed for cleaning.

www.liquidynamics.com

71

LUBE BAR

LUBE DISPENSING BAR AND CONSOLE

Economical and efficient, the lube dispensing bar and console mounts in the lube bay and allows product delivery from either side. Hoses gravity feed through floor via self-lubricating composite hose guides at top and bottom for smooth operation.

Available in eight and ten outlet console models or seven and nine outlet bar models.

P/N

49007

7 Station Lube Bar

• Locate Between Bays to Provide Service to Both Bay Areas

• Heavy Duty Steel Construction

• Powder Coated Finish for Durability

• Metal Floor Plate with Composite Bushing Helps Prevent

Hose Wear

• Molded Composite Meter Saddles Accepts any Type Meter

• Dimensions: 8”W x 42”L x 32”H

(Floor Opening: 5”W x 40”L)

P/N

49009

9 Station Lube Bar

• Same Features as P/N 49007 except has 9 Stations

• Dimensions: 8”W x 52”L x 32”H

(Floor Opening: 5”W x 50”L)

P/N

49011

Computer Work Station

Heavy duty 14 gauge steel construction has shelving to hold a

CPU, printer and supplies. Cabinet top is designed to protect computer display.

Cabinet has a red powder coat finish for appearance and durability. Supplied with adjustable padded feet. 23” W x

28” D x 48” H

P/N

49008

8 Station Lube Console

• Locate Between Bays to Provide Service to Both Bay Areas

• Heavy Duty Steel Construction

• Powder Coated Finish for Durability

• Polymer Hose Guides Reduce Hose Wear

• Eliminates Need for Expensive Hose Reels

• Slim Line Design Allows for Pairing with Work Station

• Dimensions: 23”W x 14”D x 43”H

(Floor Opening: 20”W x 11”D)

P/N

49010

10 Station Lube Console

• Same Features as P/N 49008 except has 10 stations

• Dimensions: 30”W x 14”D x 45”H

(Floor Opening: 26”W x 11”D)

P/N 49008 shown

72

800.894.3572

GREASE PUMP SELECTION GUIDE

Pressure Ratio 10:1

P/N

11748

Designed for bulk transfer of grease and high viscosity oils over short distances. Has a maximum discharge pressure of

1,450 PSI and a discharge rate of over 70 lb/min. Available cam-lock connections with stingers allow this pump to be used with metal and cardboard bulk grease containers.

Pressure Ratio 13:1

P/N

11848

Also designed for bulk transfer of grease and high viscosity oils over short distances, it has a maximum discharge pressure of 1,885 PSI and a higher discharge rate of 100 lb/min. May be used with available cam-lock connections for use with metal and cardboard bulk grease containers.

Pressure Ratio 35:1

P/N

11595

An excellent choice for grease applications where there is a requirement for medium discharge pressure of up to 4,200

PSI and discharge rates of up to 9 lb/min. These pumps are designed to fit 420 lb drums

Pressure Ratio 60:1

P/N

11148T, 11174T

AND

11195T

These pumps produce a maximum grease pressure of

7,200 PSI and are ideal for both fixed and mobile applications. Grease output volume is sufficient for most demanding applications requiring grease transfer for distances up to 200 ft.

Pressure Ratio 80:1

P/N

11348, 11374

AND

11395

A great combination of grease pressure and volume in one pump. With an 80:1 ratio these pumps have the capability to produce 9,600 PSI, enough to free most any "stuck" grease fitting. These pumps also have a large output volume and may be plumbed directly to 3/4" or 1/2" plumbing, minimizing pressure losses. Pumps are powerful enough to push grease to 200 ft. or greater. These pumps may be ordered with "camlock" fittings to allow them to be used with

5,000 lb. grease totes.

www.liquidynamics.com

73

AIR OPERATED GREASE PUMPS

Part Number

Pump Ratio

11148T

60:1

11174T

60:1

11195T

60:1

11348

80:1

11374

80:1

11395

80:1

11748

10:1

11848

13:1

11595

35:1

Delivery Rate (oz/min) 48 48 48 126 126 126 70 100 140

Working Pressure PSI 80-120 80-120 80-120 80-120 80-120 80-120 80-145 80-145 80-120

Air Inlet (NPTF)

Grease Outlet (NPTF)

1/4” 1/4” 1/4” 3/8”

*

1/4”

*

1/4”

*

1/4” 3/4”

Air Consumption (cfm) 12

Noise (dB) 79

12

79

12

79

20

79

3/8”

3/4”

20

79

3/8”

3/4”

20

79

3/8”

1”

87

79

3/8”

1

1

4

103

79

3/8”

3/4”

20

79

Drum Size (lb) 30/60

Dia., Suction Tube (in) 1.26

Length Suction Tube (in) 19.75

Shipping Weight (lb) 12

120

1.26

29.50

14

420

1.26

37.50

16

30/60

1.42

19.75

20

120

1.42

29.50

22

420

1.42

37.50

24

N/A

2.00

N/A

32

N/A

3.00

N/A

40

420

1.65

37.5

26

Note: For longer pump life and efficiency, we recommend the use of dried air or an air filter. As with any pneumatic equipment, you can expect longer trouble free operation with the use of clean, dry air. The use of an air drier, separator (filter), or minimally an air filter is advantageous. See page 53 for selection of air regulators, separators (filter) and dryers.

*

Order with a “-02” suffix (eg; 11174T-02) to receive 3/8” discharge.

74

800.894.3572

AIR OPERATED GREASE PUMP ACCESSORIES

Follower Plates:

The follower plate is indispensable when using heavy greases. The follower is pulled towards the bottom of the drum by the vacuum created by the pump operation and provides the following advantages:

It keeps the grease clean and free of impurities.

It compresses the grease which eliminates the formation of air pockets and possible cavitation of the pump.

It ensures complete emptying of the drum contents.

It is constructed of heavy duty materials with a double 'O' ring seal on the I.D. to prevent air entrainment.

P/N

12031T

Follower plate for use with P/N 11148T, 60:1 pumps and 5-6 1 ⁄

2 gal. pails, with

I.D. between 10.6” and 11.8”.

P/N

12037T

Follower plate for use with P/N 11174T, 60:1 pumps and 120 lb. drums, with

I.D. between 13.2” and 14.2”.

P/N

12037HV

Follower plate for use with P/N 11374, 80:1 high volume grease pump and

120 lb. drums with ID between 13.2” and 14.2”.

P/N

12058T

Follower plate for use with P/N 11195T, 60:1 pumps and 420 lb. drums with I.D.

between 21.3” and 22.8”.

P/N

12059

Follower plate for use with P/N 11395, 80:1 high volume, high pressure grease pumps and 420 lb. drums with I.D. between

21.3” and 22.8”.

P/N

12063

Follower plate for use with P/N 11595, 35:1 high volume grease pump and 420 lb. drums with I.D. between 21.3” and 22.8”.

Grease Drum Covers:

The drum cover keeps dust and impurities from contaminating the grease. It also keeps the pump in a vertical position and at the proper height to prevent the pump from sucking up the “bag” used in many drums.

P/N

12132T

Drum cover for use with P/N 11148T pumps and 35/60 lb. grease containers. Will fit containers with O.D. between 10.2” and 12.2”.

P/N

12138T

Drum cover for use with P/N 11174T pumps and 120 lb. drums. Will fit containers with

O.D. between 13.4” and 15.2”.

P/N

12138HV

Drum cover for use with P/N 11374 high volume, high pressure grease pump and 120 lb. drums with OD between 13.4” and 15.2”.

P/N

12160T

Drum cover for use with P/N 11195T, 60:1 pumps and 420 lb. drums. Will fit containers with O.D. between 21.6” and 23.6”.

P/N

12161

Drum cover for use with P/N 11395, 80:1 high volume, high pressure grease pumps and 420 lb. drums with O.D. between

21.6” and 23.6”

P/N

12163

Drum cover for use with P/N 11595, 35:1, high volume grease pumps and 420 lb. drums with O.D. between 21.6” and 23.6”.

P/N

12136

Closure plug for grease covers prevents water and dust entry when used outdoors. Plugs slot normally used to secure drum to cart.

www.liquidynamics.com

75

GREASE CONTROL VALVES AND ACCESSORIES

Grease Control Valves

P/N

12072T

Grease control valve with rigid tube and

4 jaw coupler. Length of discharge tube including coupler is

6 1 ⁄

2

”. Inlet connection is 1/4” NPTF.

P/N

12072TS

Same as 12072T above, but includes P/N 12001T straight swivel.

P/N

12072TZ

Same as 12072T above, but includes P/N 12003T ‘Z’ swivel.

P/N

12070T

Grease control valve with 12” flex hose and 4 jaw coupler.

Inlet connection is 1/4” NPTF.

P/N

12070TS

Same as 12070T above, but includes P/N 12001T straight swivel.

P/N

12070TZ

Same as 12070T above, but includes P/N 12003T 'Z' swivel.

P/N 12070T shown

P/N

12073T

Booster grease control valve allows discharge pressure to be built up to 14,000

PSI by squeezing control handle. Includes manual relief valve to relieve pressure for easy disconnection from grease zert.

High pressure grease hose to fit grease control valves P/N

12070T, 12072T, 12073T and 12085T. 23,000 PSI burst, heavy duty.

P/N

12087

M10X1 threads, 12” long

P/N

12087-20

M10X1 threads, 20” long

P/N

12087-24

M10X1 threads, 24” long

P/N

12087-36

M10X1 threads, 36” long

P/N

12087-40

M10X1 threads, 40” long

P/N 12085TZ shown

P/N

12085T

Grease control valve with 6” rigid tube, 12” flex hose and 4 jaw coupler.

P/N

12085TS

Same as 12085T above, but includes P/N 12001T straight swivel.

P/N

12085TZ

Same as 12085T above, but includes P/N 12003T 'Z' swivel.

P/N

12001T

Straight swivel with 1/4” NPTM x 1/4”

NPTF fittings. This swivel allows free rotation of the control handle even when system is under pressure.

P/N

12071T

Heavy duty 4 jaw grease coupler to fit control valves P/N 12070T, 12072T and 12085T.

P/N

12003T

'Z' swivel with 1/4” NPT male/female fittings.

Allows free rotation of grease control handle in all directions, even when system is under pressure.

P/N

12112T

Handle for portable grease kits. For use with P/N 11148T pumps and 12132T covers.

76

800.894.3572

STATIONARY AND MOBILE GREASE PUMP KITS

120 lb. Stationary

Grease System 60:1

P/N

13062T-S1

Includes:

• P/N 11174T Pump

• P/N 12138T Drum Cover

• P/N 12037T Follower Plate

• P/N 81300-06 1/4" x 6' High Pressure Hose

• P/N 81100-06 3/8" x 6' Air Hose

• P/N 540201-G Filter Regulator w/gauge

• P/N 13063T-S1 120 lb. Grease System 60:1

Same as 13062T-S1 except has 12’ grease hose P/N 81300-

12 and P/N 12072TZ grease control handle with ‘Z’ swivel.

Note: See selection guide if variations from base system are desired.

35 lb. Portable

Grease System

P/N

13027T-S1

Portable Grease Kit for

35-60 lb. (5-6 1 ⁄

2 gal.) Pails.

Kit comes complete with a unique carrying handle which allows easy movement of the grease pail.

Includes:

• P/N 11148T 60:1 Grease Pump

• P/N 12132T Drum Cover

• P/N 12031T Follower Plate

• P/N 12072T Control Valve w/Rigid Tube and Four Jaw Coupler

• P/N 12003T “Z” Swivel

• P/N 81300-06 1/4” X 6 ft. High Pressure Hose

• P/N 12112T Grease Kit Carrying Handle

Note: See selection guide if variations from base system are desired.

420 lb. Stationary

Grease System 60:1

P/N

13071T-S1

Includes:

• P/N 11195T Pump

• P/N 12160T Drum Cover

• P/N 12058T Follower Plate

• P/N 81300-06 1/4" x 6' High

Pressure Hose

• P/N 81100-06 3/8" x 6' Air Hose

• P/N 540201-G Filter Regulator w/gauge

• P/N 13072T-S1 420 lb. Grease System 60:1

Same as 13071T-S1 except has 12’ grease hose P/N 81300-12 and P/N 12072TZ grease control handle with ‘Z’ swivel.

Note: See selection guide if variations from base system are desired.

120 lb. Mobile

Grease System

P/N

13051T-S1

Portable Grease Kit for

120 lb. (16 gal.) Drums.

Kit includes sturdy two wheel cart which allows the operator to easily maneuver over obstructions such as hoses, floor cracks and tools.

Includes:

• P/N 11174T 60:1 Grease Pump

• P/N 12138T Drum Cover

• P/N 12037T Follower Plate

• P/N 12072T Control Valve w/Rigid Tube and

Four Jaw Coupler

• P/N 12003T “Z” Swivel

• P/N 81300-12 1/4” x 12 ft. High Pressure Hose

• P/N 51004C Two Wheel Cart, secures drum to cart at top and bottom of drum

Note: See selection guide if variations from base system are desired.

www.liquidynamics.com

77

MOBILE GREASE KITS

420 lb. Mobile Grease System with

Heavy Duty Cart

P/N

13070-S1

Portable Grease Kit for 420 lb. (55 gal.) Drums. Convenient kit allows efficient dispensing of grease for high volume applications. Heavy duty cart has large wheels and tow bar for easy maneuverability and space for addition of hose reel if desired. Retainer bracket to hold pump during drum change is standard.

Items included in kit are as follows:

• P/N 11195T 60:1 Grease Pump

• P/N 12160T Drum Cover

• P/N 12058T Follower Plate

• P/N 12070T Control Valve with Flex Hose

• P/N 12003T “Z” Swivel

• P/N 81300-12 12 ft. High Pressure Hose

• P/N 51009C Heavy Duty 4 Wheel Cart

• P/N 540201-G Air Filter/Regulator w/gauge

Note: See selection guide if variations from base system are desired.

420 lb. Mobile Grease Kit with

Heavy Duty Cart and Reel

P/N

13070-S3

Mobile Grease Kit for 420 lb. drums with heavy duty cart and 50’ reel. System is ideal for use in shops with rough and uneven floors.

Following items are included:

• P/N 11195T 60:1 Grease Pump

• P/N 12160T Drum Cover

• P/N 12058T Follower Plate

• P/N 12070T Control Valve with Flex Hose

• P/N 12003T “Z” Swivel

• P/N 43102-50G 1/4” x 50’ Grease Reel

• P/N 540201-G Air Filter/Regulator w/gauge

• P/N 81300-06 1/4” x 6’ Grease Connection Hose

• P/N 51009C Heavy Duty 4 Wheel Cart

Note: See selection guide if variations from base system are desired.

78

800.894.3572

GREASE SYSTEM SELECTION GUIDE

This grease system selection guide allows you to customize your Grease Pump System and still take advantage of our kit pricing. System pricing applies when a minimum of four additional items are selected in addition to the base system

G35, G120 or G420.*

SYSTEM IDENTIFIER

G35

35 lb. Grease System, 60:1 Pump

G120 120 lb. Grease System, 60:1 Pump

G420

420 lb. Grease System, 60:1 Pump

R

F

B

CONTROL HANDLE SELECTION

X Not Required

Control Handle w/Rigid Spout

Control Handle w/ Flex Spout

Control Handle w/ Rigid and Flex Spouts

P/N G120FZL12XXD3FR2 shown

SWIVEL SELECTION

X Not Required

S

Z

Straight Swivel

Z Swivel

GREASE HOSE/REEL SELECTION

XX Not Required

H6 1/4” x 6’ Hose

H12 1/4” x 12’ Hose

H20 1/4” x 20’ Hose

L6 3/8” x 6’ Hose

L12 3/8” x 12’ Hose

L20 3/8” x 20’ Hose

R50 1/4” x 50’ Grease Reel

S50 3/8” x 50’ Grease Reel

AIR HOSE SELECTION

XX Not Required

A6 3/8” x 6’ Hose

A10 3/8” x 10’ Hose

A15 3/8” x 15’ Hose

CART/DOLLY SELECTION

XX Not Required

D1 Carrying Handle

D2 Drum Dolly (G35 Only)

D3 Drum Dolly

(G120 Only)

D4 Drum Dolly (G420 Only)

D5 2 Wheel Cart (G35 and G120)

D6 4 Wheel Cart (G35 and G120)

D8 Heavy Duty 4 Wheel Cart (G420 Only)

AIR FILTER/REGULATOR SELECTION

XXX Not Required

FR1 FRL Combo, 150 PSI

FR2 FR Combo, 150 PSI

FR3 FRL Combo, 230 PSI

FR4 FR Combo, 230 PSI

G120 F Z L12 XX D3 FR2

Example of customized grease system for 120 lb. drums includes a flex control handle with ‘Z’ swivel, a 3/8” x 12’ hose, no air hose, a 120 lb. drum dolly and air filter/regulator w/gauge (150 PSI input capability).

*Note: For pricing see back section of price booklet.

www.liquidynamics.com

79

GREASE METER CONTROL VALVE

GREASTER

The compact and lightweight design of this metered control handle allows it to be used in place of normal, non-metered, grease control handles. As with any grease control handle it may be fitted with your choice of flex or rigid discharge spout and either a straight or “Z” swivel at the inlet.

The Greaster incorporates both a resettable batch total displayed in ounces, and a non-resettable cumulative total displayed in pounds.

Why use a grease meter? Under normal operating conditions the amount of grease dispensed is highly variable due to various factors such as pump size, efficiency, plumbing diameter and length, type of grease, ambient temperature and line restrictions to name just a few. With the Greaster

Meter you can now be assured of the amount of grease that is actually dispensed, regardless of the system operating conditions.

Body: Machined aluminum body, handle and gear cover. Steel control lever handle contains receptacle for two user replaceable 1.5V standard AA batteries.

Inlet: 1/4” NPTF Outlet: 1/8” NPTF

Meter: Oval gear sensing elements, easily accessed via front cover held in place by 4 ea. 3 mm allen screws.

Electronics: Microprocessor controlled with LCD display. Batch total (resettable), cumulative total (non-resettable).

Control Lever Lock: Allows discharge lever to be safely secured to prevent accidental opening of the discharge valve.

Performance Specifications:

Operating Pressure (max.)

Burst Pressure (min.)

Metering Accuracy

Display

7,250 PSI

14,500 PSI

+/- 3%

Batch Total (oz.), 4 digits, 0.31” digit height

Cumulative Total (lb.), 4 digits, 0.16” digit height

Battery Type/Life

Weight

2 ea. AA / 10,000 hrs.

2.16 lb. (batteries included)

Operating Temperature Range 30° F to 140° F

Battery Access

1/4” NPTF Inlet

Serial Number Location

Oval Gear Access Cover

1/8” NPTF Discharge

Discharge Lever Locking Screw

Popular Models Available:

P/N

100450

Model LG-100, Grease Meter Only (oz./lb. display)

Re-settable Batch

Total LCD Display

P/N

100451

Model LG-100-ZR, Grease Meter w/ ‘Z’ swivel and rigid spout

P/N

100452

Model LG-100-ZF, Grease Meter w/ ‘Z’ swivel and flex spout

P/N

100454

Model LG-100-F, Grease Meter w/ straight swivel and flex spout

Note: Other models available upon request

8 3 ⁄

4

Non-Resettable Cumulative

Total LCD Display

Batch Total

Reset Button

P/N

100460

Low flow capability In-Line Meter for grease applications at working pressures up to 7,800 PSI. A re-settable LCD display indicates oz. (weight) of grease dispensed and a non re-settable cumulative total in lb. Metering accuracy is +/- 3%, power is supplied by two 1N alkaline batteries, 1/8” NPTF threads.

80

800.894.3572

GREASE CAMLOCK PUMPS

P/N

11149

60:1 Grease Pump with 19” suction tube and 3” camlock adapter mounting to fit bottom mount of

Bulk Grease Tote Tanks. Uses P/N 11148T pump with output of approximately 48 oz. per minute.

P/N

11196

60:1 Grease Pump with 37” suction tube and 3” camlock adapter mounting to fit side pocket mount of Bulk Grease Tote Tanks. Uses P/N

11195T grease pump with output of approximately

48 oz. per minute.

P/N

11349

80:1 Grease Pump with 19” suction tube and 3” camlock adapter mounting to fit bottom mount of Bulk Grease Tote Tanks.

Uses P/N 11348 grease pump with output of approximately 126 oz. per minute.

P/N

11396

80:1 Grease Pump with 37” suction tube and 3” camlock adapter mounting to fit side pocket mount of Bulk Grease Tote Tanks.

Uses P/N 11395 grease pump with output of approximately 126 oz.

per minute.

P/N

900298

3” Female Camlock Coupler with 3” NPTM threads used in conjunction with Bulk Grease

Tote Camlock Pumps. Coupler mounts to Grease Tote Tank at side pocket or at bottom, depending on pump to be used.

P/N

900298-A

3” Female Camlock Coupler with 2” NPTM threads, otherwise same as P/N 900298.

These stingers are designed to be used with high volume grease transfer pumps P/N 11748 and 11848 for use with large

Metal or Cardboard (collapsible) Grease Totes. Stingers will thread directly into the inlet of the High Volume Grease Transfer

Pumps while the 3” Camlock connects to the bottom discharge of the grease tote.

P/N

900298-A-EZ

Has a 2” male fitting and 11” stinger for use with P/N 11748

(10:1 ratio, 70 lb/min) grease pump and collapsible cardboard grease totes.

P/N

900298M-A-EZ

Has 2” male fitting and 19” stinger for use with P/N 11748

(10:1 ratio, 70 lb/min) grease pumps and metal grease totes.

P/N

900298-EZ

Has 3” male fitting and 11” stinger for use with P/N 11848

(13:1 ratio, 100 lb/min) grease pump and collapsible cardboard grease totes.

P/N

900298M-EZ

Has 3” male fitting and 19” stinger for use with P/N 11848

(13:1 ratio, 100 lb/min) grease pumps and metal grease totes.

P/N 900298M-A-EZ

P/N 900298M-EZ

P/N 900298-A-EZ

P/N 900298-EZ www.liquidynamics.com

81

HAND OPERATED GREASE PUMPS

MODEL

MA-11

P/N 10011

Bulk Fill Hand Operated Grease Pump Kit, fits 5 to 6 1 ⁄

2 gallon pails. Pump is used to refill grease guns, bearing packers and for bulk transfer of grease. Pump is not intended for pressure applications. Kit includes pump, cover, follower plate, and grease gun bulk fill nozzle.

MODEL

MA-13

P/N 10013

Same as MA-11 above except pump, cover and follower are sized to fit 120 lb. drums.

MODEL

MA-11BP

P/N 10011BP

Complete Bearing Packing system includes pump, cover and follower plate, fits 5 to 6 1 ⁄

2 gallon pails. Bearing Packer designed to service up to 6” diameter bearings. Bearing Packer mounts directly to pump via supplied adapter.

MODEL

MA-13BP

P/N 10013BP

Same as MA-11BP above except pump, cover and follower plate are sized to fit 120 lb. drums.

MODEL

BP-11

P/N 10113

Bearing packer for portable or permanent application. Ideal for use with hand or air operated grease guns. Will accommodate bearings up to 6” diameter. Gold zinc plated for durability.

P/N

10050

Heavy duty hand operated grease pump to fit 5 to 6 1 ⁄

2 gallon pails. Pump is intended for pressure applications and is supplied complete with cover, follower plate, 10 ft. hose, shut-off valve and 4 jaw coupler. Generates 6,000 PSI and

1 oz. per stroke.

82

800.894.3572

HAND OPERATED GREASE GUNS

P/N

500102

Mini pistol grip grease gun for use with 3 oz. cartridges or bulk suction loading. Features dual port head which allows straight on use. Bright zinc plate finish and knurled barrel. Includes 6” rigid extension with 4 jaw coupler.

Approximately 35 strokes per oz.

Alternate spout mounting

P/N

500101

Standard lever grease gun with bright zinc finish for use with

14 oz. grease cartridge. Supplied with 6 1 ⁄

2

” rigid extension and 4 jaw coupler. May be fitted with bulk loader nipple,

P/N 500123, sold separately. Approximately 18 strokes per oz.

P/N

500101F

Same as P/N 500101 except provided with 12” flex extension in place of rigid extension.

P/N

500100

Handgrip grease gun with 3 way loading capability, 14 oz. cartridges, filler pump or bulk fill. Features an air vent and dual port head, which allows straight on use. Bright zinc plate finish with knurled barrel. Includes 4” rigid extension with 4 jaw coupler. Approximately 35 strokes per oz.

P/N

500100F

Same as P/N 500100 except provided with 12” flex extension in place of rigid extension.

Alternate spout mounting

P/N

500129

Heavy duty cast iron head has 3 way loading capability; 14 oz. cartridge, filler pump or bulk fill. Rugged steel tube with non-slip knurling will provide years of reliable service.

Provided with 6” rigid extension and heavy duty 4 jaw coupler.

Approximately 24 strokes per oz.

P/N

500129F

Same as P/N 500129 except provided with 12” flex extension in place of rigid extension.

P/N

500128

Premium high performance lever grease gun with heavy steel barrel, cast iron head and bright zinc finish. Has short stroke capability and will produce better than 10,000 PSI using extra leverage steel handle. 6” rigid extension with

4 jaw coupler may be attached in one of two directions for maximum flexibility. Fill 3 ways, bulk fill pump using available bulk loader nipple (P/N 500123 sold separately),

14 oz. cartridge or bulk hand fill. Approximately 15 strokes per oz.

P/N

500128F

Same as P/N 500128 except provided with 12” flex extension in place of rigid extension.

www.liquidynamics.com

83

HAND, BATTERY AND AIR OPERATED GREASE GUNS

P/N

500141R

Unique lever grease gun has seals designed for use with oils and light (flowable) greases without leakage. Hydraulic coupler is fitted with a ball check to prevent leakage. Will generate 5,800 PSI pressure with oil or grease. Uses standard

14 oz. grease cartridges or may be bulk loaded (using P/N

500123 sold separately). Supplied with 7” rigid extension and

4 jaw coupler. Approximately 21 strokes per oz.

P/N

500103

Premium high performance lever grease gun with heavy steel barrel and head. Will produce better than 10,000 PSI using extra leverage steel handle. Scales on handle allows

“metering” of grease using “short” stroke capability. Fill 3 ways using filler nipple (P/N 500123 sold separately), 14 oz.

cartridge or bulk fill. Includes 7” rigid extension, heavy-duty

4-jaw coupler and ergonomic cushioned handle grip.

Approximately 15 strokes per oz.

P/N

P/N

500103F

Same as P/N 500103 except provided with 12” flex extension in place of rigid extension.

P/N

500141F

Lever grease gun same as P/N 500141R but with 12” flex spout.

P/N

500119

Oil suction gun holds approximately 16 oz. of fluid. Comes with 10” flexible suction tube and bright zinc plated finish.

Ideal for emptying small reservoirs.

P/N

500177

18 VDC Battery Operated Grease Gun

This new Liquidynamics Battery Operated Grease Gun combines versatility, reliability and increased power to provide the user with excellent greasing capability. The powerful 18 VDC motor delivers a constant flow of grease at up to 6,000 PSI at a flow rate of 2.4 oz./min. providing reliable and effective lubrication. Complete with carrying case, 18 V NiCad battery, battery charger and 26” flex tube with coupler. Fill three ways, using filler nipple (P/N 500123 sold separately), 14 oz. cartridge or bulk fill.

P/N

500143

Air operated hand grease gun delivers a continuous stream

of grease while trigger is depressed. 50:1 ratio has a maximum pressure capability of 6,000 PSI. Output is approximately 5 oz. per minute. For use with 14 oz. grease cartridges, filler pump (using P/N 500123 sold separately) or bulk fill. Provided with 6” rigid extension and 4-jaw coupler.

84

800.894.3572

HAND GREASE GUN ACCESSORIES

P/N

500131

Grease gun holder may be mounted to most any surface. Will hold any grease gun or suction gun with a barrel diameter of approximately 2 1 ⁄

4

”. Can be used in conjunction with BP-11 bearing packer for bench top bearing packer system.

P/N

500107

4 jaw hydraulic grease coupler w/o ball check.

P/N

500108

4 jaw hydraulic grease coupler w/ball check.

P/N

500145

12” Whip hose for use w/hand grease guns, 1/8” NPTM.

P/N

500146

18” Whip hose for use w/hand grease guns, 1/8” NPTM.

P/N

500137

24” Whip hose for use w/hand grease guns, 1/8” NPTM.

P/N

500138

36” Whip hose for use w/hand grease guns, 1/8” NPTM.

P/N

500126

Extra Heavy duty grease coupler with three jaw attachment and ball check.

P/N

500132

Needle nose adapter for hard to reach applications, 1/8” NPTF.

P/N

500130

6” Curved steel pipe for hand grease gun use, 1/8” NPTM.

P/N

500123

Loader nipple for use with filler valve P/N 900267, MA-11 and

MA-13. Thread is 1/8” NPTM.

P/N

500139

Seal off adapter w/rubber tip.

P/N

500133

Injector needle lubricator for sealed bearings.

www.liquidynamics.com

P/N

900267

Filler pump adapter for use with P/N 500123 loader nipple.

Has 3/8” NPTF threads.

85

86

GREASE FITTINGS

Part No.

Description Pkg. Qty. / Type

500134 1/4” NPT (PTF extra short), Straight

500109 1/8” NPT (PTF extra short), Straight

500110 1/8” NPT (PTF extra short), 45°

500111 1/8” NPT (PTF extra short), 90°

500113 1/4” - 28 (SAE LT taper), Straight

500114 1/4” - 28 (SAE LT taper), 45°

500115 1/4” - 28 (SAE LT taper), 90°

500135 5/16” Drive Type, straight w/ball

500154 5/16” Drive Type, straight w/o ball

500155 1/4” Drive Type, straight, w/ball

500156 1/4” Drive Type, straight, w/o ball

500163 6 mm x 1.0 straight

500164 8 mm x 1.0 straight

500165 10 mm x 1.0 straight

500166 6 mm x 1.0, 45°

500167 6 mm x 1.0, 90°

500168 8 mm x 1.0, 90°

500157 1/8” NPT Button Head, ball type

500158 1/4” NPT Button Head, ball type

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

500159 3/8” NPT Button Head, ball type 1 pc. / bulk

500160 1/2” NPT Giant Button Head, plunger type 1 pc. / bulk

500161 Button Head coupler, 16 mm

500162 Giant Button Head Coupler, 22 mm

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

1 pc. / bulk

Bulk Part No.

500134-100

500109-100

500110-100

500111-100

500113-100

500114-100

500115-100

500135-100

500154-100

500155-100

500156-100

500163-100

500164-100

500165-100

500166-100

500167-100

500168-100

Pkg. Qty. / Type

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

100 pcs. / bulk

Straight Fitting

90° Fitting

45° Fitting

Button Head Coupler

Button Head Fitting,

Ball Type

Button Head Fitting,

Plunger Type

800.894.3572

BULK TRANSFER PUMPS

Designed for the transfer of Motor Oil, Gear Oil, Transmission Fluid, Hydraulic Fluid and 100% Antifreeze, these versatile pumps offer flexibility, economy and simplicity. A unique patented gear and rotor design provides for efficient positive displacement pumping. This, in conjunction with a specially designed bypass allows for the transfer of a wide range of fluids up to a viscosity of 3,150 cps. Liquidynamics Bulk Transfer Pumps are designed to automatically minimize current draw by responding to increases in viscosity by limiting output flow, thus staying within the amperage limitations imposed by 115 VAC power sources. Other configurations available, contact Liquidynamics for more information. Any of the Transfer Pumps below may be fitted with the optional “PowerMaster” control by adding a ‘P’ suffix to the base number, i.e.; P/N 33280 with

PowerMaster becomes P/N 33280P. See page 90 for features and benefits of the PowerMaster control option.

Three Speed Bulk Transfer Cart (Patent pending)

P/N

33280

and

P/N

33280P

A unique three speed gear box allows this pump to be used over a tremendous range of viscosities ranging up to 3,150 cps. By simply shifting gears you can pump “thin” fluids such as 100% Antifreeze or Hydraulic Oil at 40 GPM, medium viscosity fluids such as 10W30 Motor Oil at 20 GPM or “thick” fluids such as 120 wt Gear Oil at 10 GPM.

The mobile cart is constructed of heavy gauge 1” steel tubing for strength and powder coated for durability. The cart is supplied complete with 2” x 10’ suction hose, 1 1 ⁄

2

” x 15’ discharge hose, 1 1 ⁄

2

” manual nozzle and 12 ga. x 25’ three wire power cord. An integral 2 1 ⁄

2 gallon drip catch tank stores any drippage from the suction hose, stinger or discharge nozzle and has a convenient drain valve for draining. Cam-locks are provided on both ends of the suction and discharge hoses for easy removal of hoses and accessories.

Dimensions, 24” W x 24” D x 48” H.

P/N 33280 shown

Single Speed Transfer Cart for Medium Viscosities

P/N

33267-20CG

and

P/N

33267P-20CG

This cart system is similar in design and function to P/N 33280 described above, except that it has a single speed gear reduction, which allows pumping of “light” and medium viscosities (max 625 cps) at 20 GPM. It is a more economical solution for applications where the versatility of the three speed gear reduction is not required.

High Volume Transfer Cart for Light Viscosities

P/N

33267

and

P/N

33267P

Ideal for high volume transfer of “light” (max 165 cps) viscosities such as 100%

Antifreeze, Transmission Fluid, Hydraulic Fluid and Cutting Oils. It is similar in design and function to P/N 33280 described above, except that is does not utilize a gear reduction between the pump and motor, which allows transfer rates of 40 GPM. It is an excellent solution for applications where a fixed gear reduction or the versatility of the three speed gear reduction is not required.

Medium Viscosity 20 GPM Transfer Cart

P/N

33271

and

P/N

33271P

Designed for transfer of light Oils, Hydraulic Fluid, Transmission Fluid and

Antifreeze, this versatile gear pump offers economy, reliability and simplicity.

The Bronze construction allows this pump to be used for bulk transfer of premixed antifreeze and other water based fluids up to 165 cps. ‘C’ face mountings ensure rigid and maintenance free alignment between pump and motor.

The system is equipped with a 1” x 10’ suction hose, 1” x 20’ discharge hose, ball control nozzle and a 30 mesh inlet strainer. Plumbing is constructed of bronze fittings and schedule 40 bronze piping for maximum compatibility with a wide range of fluids. The sturdy two wheel cart is constructed of heavy gauge 1” powder coated steel tubing and has large 10” pneumatic tires for ease of portability. A rotary on/off switch is provided for pump control along with 25’ of 12 gauge, 3 wire power cord. An optional meter may be installed to monitor transfer quantities for inventory control purposes. Dimensions; 24”W x 16”D x 48”H

P/N 33271 shown www.liquidynamics.com

87

BULK TRANSFER CARTS

High Volume Transfer Pump Skid for Light

Viscosities

P/N

33265

An economical solution for the high volume transfer of

“light” (max 165 cps) viscosities such as 100% Antifreeze,

Transmission Fluid and Cutting Oils. The pump and motor are identical to the High Volume Transfer Pump Cart System

P/N 33267, but utilizes a heavy duty skid frame to house the pump and motor. Order optional accessories shown below as necessary, to customize your skid configuration.

Single Speed Transfer Pump Skid for Medium Viscosities

P/N

33265-20SG

This versatile skid mounted gear pump offers an economical, reliable and simple solution for the transfer of “medium” viscosity fluids such as 10W30 Motor Oils (max 625 cps). The pump, motor and gear reduction are identical to the Single

Speed Transfer Pump Cart system P/N 33267-20CG, but utilizes a skid frame to house the pump, motor and gear box. Order optional accessories shown below as necessary, to customize your skid configuration.

The skid cage is constructed of heavy gauge 1” steel tubing for strength and powder coated for durability. The pump is fitted with quick connect cam lock fittings to allow easy attachment of available accessories such as suction hose, stinger, discharge hose and nozzle.

Hand Carry 7 GPM Bulk Transfer Pump

P/N

33261

Ideal for transfer of Motor Oils, Transmission Fluid, Hydraulic Fluid and

100% Antifreeze, this versatile vane pump offers economy, reliability and simplicity. The five vane rotor design provides efficient positive displacement pumping. This, in conjunction with the continuous rated,

1 1 ⁄

2

HP motor allows for transfer of a wide range of fluids up to 490 cps.

The unique hand carry frame mount is extremely portable, yet the system can empty a 55 gallon drum of oil in less than 8 minutes. An integral on/off rocker switch, 6’ grounded power cord and quick connect cam-lock fittings are provided for convenient pump connection and control. The use of a cast iron pump body bolted directly to the motor ensures a rigid and maintenance free alignment between pump and motor. Dimensions 14”W x 21”L x 12”H.

Part Number

Nominal GPM

Max. Viscosity, cps

Fluid Inlet

Fluid Outlet

Horsepower

Voltage

Amperage

Weight

33280

10/20/40

3,150

2”

1.5”

2.0

16/8

220

33267

40

165

2”

1.5”

2.0

16/8

160

33267-20CG 33265 33265-20SG

20

625

2”

1.5”

40

165

2”

1.5”

20

625

2”

1.5”

2.0

2.0

115/230 VAC Single Phase

2.0

16/8

140

16/8

88

16/8

140

33271

20

370

1”

1”

2.0

12/6

160

33261

7

490

1”

.75”

1.6

8/4

25

Optional Accessories:

P/N

950084

Suction 1 1 ⁄

2

” x 4’ Stinger w/ cam-lock

88

P/N

81291-10

2” x 10’ PVC

Suction Hose

P/N

81281-15

1

1

2

” x 15’ PVC

Discharge Hose

P/N

32108

1

1

2

” High Flow Control

Valve

800.894.3572

PURELUBE FILTER SYSTEMS

Liquidynamics PureLube Filter Systems offer excellent solutions for fluid filtering applications by providing a wide selection of filter carts, mini carts, portable hand carry systems and custom designed systems. These filter carts are designed to handle a broad range of viscosities and flow rates in order to efficiently and economically filter small, medium and large capacity gear boxes, reservoirs and storage tanks.

For high viscosity applications, Liquidynamics uses “Depth” type filters that provide efficient particulate removal via long flow paths which, achieves low micron filtration in the 1 to 3 micron range. These filters are also efficient for removing water at up to 1 gallon per element. Choose your filter element below to best fit your application.

High Viscosity Filter Cart:

P/N

33277

For absolute filtration of high viscosity fluids up to and including ISO 680, this is the solution. Two Depth Filters plumbed in parallel provide a large surface area which allows very slow movement of fluid for effective filtration of particles in the 1 to 3 micron range along with water removal of up to 1 gallon of water per element.

The heavy gauge 1” steel tubing cart frame is powder coated for strength and durability, 10” pneumatic wheels provide easy control and movement. Standard equipment includes 5

GPM internal gear pump with 2 HP, 115 VAC motor, 1” x 10’ suction hose with 4’ probe, 1” x 15’ discharge hose with probe, cam-lock hose connections, filter pressure gauges and probe/discharge nozzle retainer/drip catch system.

High Viscosity Filter Cart w/PowerMaster Control:

P/N

33277-P

Same as P/N 33277 but includes PowerMaster option.

See page 90 for additional information on PowerMaster features and benefits.

REFERENCE INFORMATION:

Relative Sizes of Particles

Substance Micron Inches

Grain of table salt 100 .0039

Human hair 70 .0027

Lower limit visibility 40 .0016

Milled flour 25 .0010

Red blood cells

Bacteria

8

2

.0003

.0001

www.liquidynamics.com

Replacement Filter Elements:

For use with P/N

33277 and 33277-P High Viscosity Filter Carts.

P/N

71460-2

Two element filter for use with light weight oils, ISO 10 through 32 such as hydraulic fluid, cutting oils, turbine oils, etc.

P/N

71460-4

Four element filter for use with medium weight oils,

ISO 32 through 68, such as mineral and synthetic hydraulic, dielectric, turbine oil, lubricating oils and cutting oils.

P/N

71460-6

Six element filter for use with medium weight lube oils,

ISO 68 through 150.

P/N

71460-8

Eight element filter for use with heavy weight lube oils,

ISO 150 through 680.

89

PURELUBE FILTER SYSTEMS

Liquidynamics PureLube filter systems offer excellent solutions for fluid filtering applications by providing a wide selection of filter carts, mini carts, portable hand carry systems and custom designed systems. These filter carts are designed to handle a broad range of viscosities and flow rates in order to efficiently and economically filter small, medium and large capacity gear boxes, reservoirs and storage tanks.

To ensure efficient filtering, Liquidynamics uses 5 layer, high performance filter elements, which have exceptionally high contaminant holding capacities while also achieving Beta ratios exceeding 200. This ensures reaching your target ISO fluid cleanliness levels while maintaining high fluid quality and superior system longevity. These elements are available in cartridge and spin-on styles for both particulate and water removal applications.

20 GPM Absolute Filtration Cart:

P/N

33276

Practical, versatile and reliable are some of the ways to describe this

Filter/Transfer Cart. Versatile plumbing allows this cart to be used for bulk transfer at up to 20 GPM, as well as filtration, by simply opening and closing a couple of valves. With its well designed features and sturdy construction, this cart is eminently practical. Engineered reliability is evident from the heavy gauge

1” steel tubing construction, powder coated for durability. Easy maneuverability is assured with 10” pneumatic tires. Unit is supplied with unique probe/discharge nozzle retainer/drip catch system.

The cart is equipped with a 10’ suction hose, 20’ discharge hose and 4’ suction and discharge probe. Hose and probes are fitted with cam-lock fittings to allow easy connection/disconnection. The probes are easily stored in the handy drip receptacles while the hoses can be coiled on the provided retainers. Optional fluid sample ports may be added before and/or after the filter as desired. Pressure gauges are provided after each filter to allow monitoring of filter condition.

20 GPM Absolute Filtration Cart w/PowerMaster Control:

P/N

33276-P

Same as P/N 33276 but includes PowerMaster option. See below for features and benefits of the PowerMaster control option.

P/N 33276 shown w/ series filtration

P/N

33276L-P

Same as P/N 33276 but includes PowerMaster option and parallel filters. See below for features and benefits of the

PowerMaster control option.

PowerMaster Control Option:

(patent pending)

The “PowerMaster” (patent pending) is a revolutionary device that prevents nuisance tripping of circuit breakers which commonly occurs when transferring or filtering viscous fluids. This amazing device automatically senses available circuit current, user selectable for either 15 or 20 amp circuits, and adjusts pump speed to maintain current draw below circuit breaker limits. This eliminates tripping of circuit breakers, speeds up filtering and ensures efficient filtering.

Additional benefits of this technology allows the user to manually adjust flow rate to “best” filter specifications depending on fluid viscosity, required ISO cleanliness level and quantity of fluid to be filtered. You can also extend filter element life by adjusting flow rate to maintain optimum filtration performance.

Whereas, fixed flow rate systems obligate you to change filters when the maximum differential pressure is exceeded.

90

800.894.3572

PURELUBE FILTER SYSTEMS

Hand Carry Absolute Filter Module w/Dual Inline Filters:

P/N

33273-2

This small, compact hand carry module is ideal for use with light to medium viscosities such as hydraulic fluids and engine oils. Applications include kidney loop systems, 55 gallon drums and other portable or temporary applications.

This model uses two 11” spin-on filter elements, your choice of 3, 5, 10 or 20 micron elements, plumbed in series with a

7 GPM pump. Pump inlet is protected with a 20 mesh ‘Y’ strainer and has 3/4” NPTF suction/discharge. Pump discharge/bypass pressure is adjustable to 80 PSI, 1.5 HP

Motor, 115 VAC, 13 amp.

Hand Carry Absolute Filter Module w/Parallel Filters:

P/N

33273L-2

Same as P/N 33273-2 except filters are plumbed in parallel for increased contaminant holding capacity and/or higher viscosity capability.

Hand Carry Absolute Filter Module w/Single Filter:

P/N

33273-1

Same as P/N 33273-2 except that only one 11” canister filter is used. This provides a more economical initial investment and is ideal for situations where contaminant loads are not expected to be very high.

P/N 33273-2 shown

Replacement Filter Media:

For use with P/N 33276, 33276-P, 33273-1, 33273-2 and

33273L-2 Filter Systems.

These high efficiency filter canisters are designed to meet a full range of filtration requirements. They use an exceptionally durable and highly efficient proprietary 5 layer synthetic media that assures trouble free operation for all hydraulic and lubrication oil applications. With Beta ratios exceeding 200, pressure rating of 200 PSI and exceptionally high dirt holding capacities, these elements are the best choice for achieving target fluid cleanliness levels while maintaining high fluid quality.

P/N

71246-03

For target fluid cleanliness Level of 16/14/12 or better

P/N

71246-05

For target fluid cleanliness Level of 18/16/14 or better

P/N

71246-10

For target fluid cleanliness Level of 20/18/15 or better

P/N

71246-20

For target fluid cleanliness Level of 22/19/16 or better

P/N

71246-10W

For water absorption and cleanliness Level of 20/18/15

Oil Filter Cart, With Nominal Filtration

P/N

33275

The ideal tool for circulating and filtering oil in existing tanks. This portable cart uses a 115 VAC pump rated at 7

GPM and includes a 6’ suction hose with inlet screen.

The 6’ discharge hose includes a 3’ stinger. An included pressure gauge allows easy determination of when the

10 micron nominal filter is dirty. See page 94 and 95 for replacement filter cartridges.

www.liquidynamics.com

91

PURELUBE ABSOLUTE HIGH PRESSURE FILTERS

Purelube Absolute Discharge Filters are designed to be installed at the discharge side of 1:1, 3:1 and 5:1 ratio pneumatic pumps and will handle working pressures up to 800 PSI with 2,000 PSI typical burst pressure. A convenient visual indicator provides a warning when the filter element needs to be changed, i.e.; a 35 PSI differential pressure will cause the indicator to show “Red”. The filter head has 1” NPTF threads to minimize pressure drop and maximize fluid flow. Filter elements are easily changed by loosening the large ring collar and removing the filter housing.

PureLube absolute discharge filters are available in 8” and 13” element lengths to accommodate various flow rates, fluid viscosities and particle holding capacities. Filter elements come in a choice of 3, 5, 10 and 20 micron ratings for ISO cleanliness ratings of 16/14/12, 18/16/14, 20/18/15 and 22/19/16 respectively.

All filter assemblies include 800 PSI rated filter head and bowl, 50 PSI bypass, 35 PSI visual indicator and filter element as indicated below.

8” Short Bowl Filter Assembly

Part Number Description

71150-03 Includes 3 micron filter for ISO 16/14/12 cleanliness level

71150-05 Includes 5 micron filter for ISO 18/16/14 cleanliness level

71150-10 Includes 10 micron filter for ISO 20/18/15 cleanliness level

71150-20 Includes 20 micron filter for ISO 22/19/16 cleanliness level

Replacement 8” filter elements

71250-03 3 micron filter element for 8” bowls

71250-05 5 micron filter element for 8” bowls

71250-10 10 micron filter element for 8” bowls

71250-20 20 micron filter element for 8” bowls

13” Long Bowl Filter Assembly

71160-03 Includes 3 micron filter for ISO 16/14/12 cleanliness level

71160-05 Includes 5 micron filter for ISO 18/16/14 cleanliness level

71160-10 Includes 10 micron filter for ISO 20/18/15 cleanliness level

71160-20 Includes 20 micron filter for ISO 22/19/16 cleanliness level

Replacement 13” filter elements

71260-03 3 micron filter element for 13” bowls

71260-05 5 micron filter element for 13” bowls

71260-10 10 micron filter element for 13” bowls

71260-20 20 micron filter element for 13” bowls

P/N

71160-10

P/N

71150-10

Filter not included

P/N

901111

High Pressure Filter wall mounting kit; includes isolation valves, wall mounting bracket and hardware to attach bracket to filter head. Allows filter element to be changed with minimal leakage and without having to remove air pressure from pump.

NOTE: Does not include hardware to mount bracket to wall.

REFERENCE INFORMATION:

Contamination Prevention and Removal

The main objective of contamination prevention is to stop contamination from initial entry. Studies have shown that it is ten times more cost effective to prevent contamination than it is to remove it, once it is present in a system. Specific solutions include desiccant and particulate breathers, pump and shaft seals and improved storage and handling of fluids.

Several technologies exist for the removal of solid and moisture contaminants from lubrication systems. The most widely used method is filtration, due to its simplicity and cost effectiveness.

It is important to institute a contamination control program for the establishment and monitoring of appropriate target cleanliness codes for machinery, storage and dispensing of lubricants. Periodic cleaning of reservoir tanks and storage vessels, along with the installation of breathers to reduce ingression of contaminants, will serve to ensure proper maintenance of target ISO cleanliness levels.

Oil analysis can be used to track trends in determining the value of various preventive maintenance efforts.

92

800.894.3572

PURELUBE DESICCANT AND AIR BREATHER FILTER

Liquidynamics PureLube desiccant breathers are a unique, patented air filter and vapor removal system designed to eliminate water, particulate and vapor contamination from entering storage tanks, drums, industrial equipment, transformers and other fluid reservoirs. Silica Gel desiccant adsorbs up to 40% of its weight in water and turns from gold to dark green to indicate when the breather needs to be replaced. Solid contaminants are removed prior to air entering the water adsorbent desiccant section of the filter by a two micron particulate filter. Another two micron particulate filter at the bottom of the unit prevents any desiccant dust from entering the storage vessel. Additionally, a layer of activated carbon removes oil vapors, fumes and odors as air is expelled from the storage vessel.

These desiccant breathers are available in a variety of shapes and sizes to fit most any application, the most popular sizes are listed below. Additional sizes and designs are available for applications that require larger quantities of desiccant, metal construction or special connections.

Compact Desiccant Breathers, 10 CFM Max Air Flow

Part Number Description

710131

710132

710133

710134

2” diameter, 1.35” tall, 1/2” NPTF Fitting

2” diameter, 3” tall, 1/2” NPTF Fitting

3 1 ⁄

4

” diameter, 1.75” tall, 1/2” NPTF Fitting

3 1 ⁄

4

” diameter, 3” tall, 1/2” NPTF Fitting

Disposable Desiccant Breathers, 35 CFM Max Air Flow

710100 5” diameter, 3.5” tall, 0.2 lb water capacity, 1” Slip Fitting*

710101

710102

5” diameter, 5” tall, 0.4 lb water capacity, 1” Slip Fitting*

5” diameter, 8” tall, 0.9 lb water capacity, 1” Slip Fitting*

*900424-01 1” female slip x 1” NPTM dapter fitting

Disposable Desiccant Breather, 100 CFM Max Air Flow

710108 5” diameter, 10” tall, 1.3 lb water capacity, 2” NPTM Fitting

Disposable Desiccant Cartridge, 250 CFM Max Air Flow

710109 6” diameter, 14” tall, 1.6 lb water capacity, 3” NPTM Fitting

PURELUBE AIR BREATHER FILTER

Storage tanks “breath” as fluid and air temperatures vary as well as when fluid is removed or added to storage tanks. This breathing process also introduces contaminants such as dust, dirt, pollen and other particulate matter. A simple solution is to add a breather filter in place of an open vent. The Liquidynamics PureLube Air Breathers are engineered for use on lubricant storage drums, tanks and totes. These breathers come standard with 2” NPTM threads and your choice of 10 micron wire mesh media (94% efficient at 10 micron), 5 micron layered polyester media (98% efficient at 5 micron) or 5 micron pleated paper media (99.3% efficient at 5 micron).

The wire mesh and polyester media may be cleaned in a suitable solvent and reused. The paper media is not reusable.

Following is a listing of available breathers and replacement elements:

Part Number Description

72101 2” NPTM, 10 Micron Wire Mesh Media, 94% efficient

72102

72103

72110

72111

72112

2” NPTM, 5 Micron Polyester Media, 98% efficient

2” NPTM, 5 Micron Pleated Paper Media, 99.3% efficient

Replacement Wire Mesh Media

Replacement Layered Polyester Media

Replacement Pleated Paper Media

4.06”

3.75” www.liquidynamics.com

93

LOW PRESSURE NOMINAL FILTERS AND ADAPTERS

Liquidynamics offers a wide range of water absorption and nominal particulate filters for use with oil, diesel and gasoline.

Maximum flow ranges are from 15 GPM for your dispenser type pumps to 40 GPM for truck service applications. Included are filter elements utilizing a 1” flow path to minimize the pressure drop for gravity flow applications.

Note: Not for use in filtering aviation fuels.

Filter

Part Number Hydrosorb

70002

70003

70004

70005

70061

70062

70067

70064

70019

70063

70068

Type 2

Type 2

Type 2

Type 2

Type 2

Type 2

Particulate

Micron

Rating

10µ

10µ

30µ

30µ

10µ

10µ

10µ

10µ

10µ

10µ

30µ

with

Draincock

Max. Flow

Rate

No

No

No

No

Yes

No

Yes

No

18 GPM (67 LPM)

18 GPM (67 LPM)

18 GPM (67 LPM)

18 GPM (67 LPM)

18 GPM (67 LPM)

18 GPM (67 LPM)

18 GPM (67 LPM)

15 GPM (56 LPM)

No 40 GPM (150 LPM)

No 40 GPM (150 LPM)

No 40 GPM (150 LPM)

Case

Qty.

12

12

12

12

6

6

6

6

6

6

6

Flow Port

Size

Recommended Adapters

Aluminum Iron

3/4” 1

1

2

” 3/4”

3/4” 50181

3/4” 50181

1”

1”

1” —

3/4” 50181

3/4” 50181

3/4” 50181

1 1 ⁄

4

1

1

4

1 1 ⁄

4

50163

50163

50163

1”

Thread

Type

50003 50002 NPT

50003 50002 NPT

50004

50004

NPT

NPT

— 50004 NPT

50003 50002 NPT

50003 50002 NPT

50003 50002 NPT

NPT

NPT

NPT

P/N

70002

P/N

70004

With draincock

3.70”

3.68”

1 3 ⁄

8

” - 12 UNF Thread

P/N

70003

P/N

70005

Without draincock

3.70”

3.68”

1 3 ⁄

8

” - 12 UNF Thread

P/N

70064

Without draincock

1” - 12 UNF Thread

9 3 ⁄

4

” 9”

8.00”

7.98”

7.25”

7.23”

P/N

70061

P/N

70062

P/N

70067

Without draincock

Water Absorbtion

Filter

3.70”

3.68”

1” - 12 UNF Thread

10 1 ⁄

2

8.65”

8.60”

P/N

70019

P/N

70063

P/N

70068

Without draincock

Water Absorbtion

Filter

5.06”

5.04”

1 1 ⁄

2

” - 16 UN Thread

13 1 ⁄

2

11.00”

10.95”

94

800.894.3572

P/N

70002

10 micron particulate filter with draincock, 3/4” flow port , 18 GPM max flow.

P/N

70003

10 micron particulate filter without draincock, 3/4” flow port, 18 GPM max flow.

P/N 70003 shown

NOMINAL FILTERS AND ADAPTERS

P/N

70061

Type 2 water absorption filter, 10 micron particulate,

1” flow port, 18 GPM max flow.

P/N

70062

Type 2 water absorption filter, 10 micron particulate, 3/4” flow port, 18 GPM max flow.

P/N

70067

Type 2 water absorption filter,

30 micron particulate, 3/4” flow port, 18 GPM max flow.

P/N

70064

Type 2 water absorption filter, 30 micron particulate, 3/4” flow port, 15 GPM max flow.

P/N

70004

10 micron particulate filter with draincock, 1” flow port, 18 GPM max flow.

P/N

70005

10 micron particulate filter without draincock, 1” flow port,

18 GPM max flow.

P/N 70004 shown

P/N 70063 shown

P/N 70061 shown

P/N

70019

10 micron particulate filter without draincock, 1 1 ⁄

4

” flow port, 40 GPM max flow.

P/N

70063

10 micron filter for water absorption, 1 1 ⁄

4

” flow port,

40 GPM max flow.

P/N

70068

30 micron filter for water absorption, 1

1

4

” flow port,

40 GPM max flow.

P/N 50003 shown

P/N

50003

3/4” NPTF Cast Iron in line filter adapter (3/4” flow path)

P/N

50002

1” NPTF Cast Iron in line filter adapter (3/4” flow path)

P/N

50004

1” NPTF Cast Iron in line filter adapter (1” flow port)

P/N

71146

Dual element aluminum filter adapter with 50 PSI internal bypass. Has 1 1 ⁄

2

” NPTF threads for use with P/N 70019,

70063 and 70068 high flow filter elements. Filter head has differential ports available for installation of gauges and/or visual indicator to warn of dirty filters.

P/N

50181

3/4” NPTF Aluminum in line filter adapter (3/4” flow port)

P/N

50109

P/N 50109 shown

1” NPTF Aluminum in line filter adapter (1 1 ⁄

4

” flow port).

For use with P/N 70019, 70063 and 70068 high flow filter elements.

P/N

50163

1 1 ⁄

2

” NPTF Aluminum in line filter adapter (1 1 ⁄

4

” flow path).

For use with P/N 70019, 70063 and 70068 high flow filter elements.

www.liquidynamics.com

95

USED OIL DRAINS

Used Oil Drain Features

31”

Large 21” diameter offset collection bowl with

31” total reach, 25 quart capacity.

21”

Collection bowl grate allows draining of filters

Positive-locking neck prevents slippage

Unique safety air vents prevent oil blow back through down tube

Uses standard air chuck to pressurize

Safety relief valve to prevent over pressurization

Easy-to-read gauge shows tank level

Tray conveniently stores tools and drain plugs and has removable drip container for hose storage

Casters are on the same side as the handle for easy manuevering

96

Discharge hose may be replaced by dry break disconnect to allow evacuation by a double diaphragm pump

800.894.3572

USED OIL DRAINS

P/N

24175

Self-evacuating, pressurized

Used Oil Drain has 21-gallon capacity tank with 25-quart capacity collection bowl.

Collection bowl is offset to provide a full 31” coverage.

Comes with large tool tray, level gauge, and ball-bearing wheels and casters.

P/N

950103

Economical Used Oil Drain Kit for 55 gallon drums (drum not included).

Includes:

• P/N 24220 Collection Bowl Drain Kit

• P/N 950008 55 Gallon Drum Dolly

P/N 950103 shown

NOTE: Drum not included

P/N

950017

Optional Dry Break Quick Disconnect kit for use on model

24175 oil drain to allow use with double diaphragm pumps.

1/2” NPTF fitting on female coupler for connection to hose.

1/2” NPTM fitting on male coupler for connection to tank.

P/N 950100 shown

NOTE: Drum not included

P/N

950100

Economical Used Oil Drain

Kit for 16-gallon drums (drum not included).

Includes:

• P/N 24220 Collection Bowl

Drain Kit

• P/N 950006 16 Gallon Drum

Dolly

• P/N 901006 16 Gallon Cover

P/N 950102 shown

NOTE: Drum not included

P/N

950102

Used Oil Drain Kit for 55-gallon drums.

Includes heavy-duty 4-wheel cart that comes complete with a tool tray and provision for storing drain pan while drum is being emptied.

Drain pan kit is supplied with 2” bung adapter to fit standard openings.

Includes:

• P/N 24220 Collection Bowl Drain Kit

• P/N 51009C 4 Wheel Cart, 55 Gallon www.liquidynamics.com

P/N 950101 shown

P/N

950101

Same as P/N 950102 except fits

16-gallon drums.

Includes:

• P/N 24220 Collection Bowl Drain Kit

• P/N 51003C 4 Wheel Cart, 16 Gallon

• P/N 901006 16 Gallon Cover

NOTE: Drum not included

97

USED OIL DRAINS

P/N

42070

Low profile, Portable Used Oil Drain has a large 25-gallon capacity and two internal baffles to prevent sloshing. Has 9” overall height, 2

1

2

” steel casters and sturdy ‘T’ handle for easy maneuverability. Standard unit comes with 1” ball valve drain. Dry break disconnects available for use with Double

Diaphragm Pumps. 9” H x 24 1 ⁄

2

” W x 46” L.

Male Dry Break Nipples:

P/N

900291

1/2” NPTF nipple

P/N

900295

3/4” NPTF nipple

P/N

900293

1” NPTF nipple

Female Dry Break Couplers:

P/N

900290

1/2” NPTF coupler

P/N

900294

3/4” NPTF coupler

P/N

900292

1” NPTF coupler

P/N

950093

1/4 HP, 115 VAC Electric Pump Kit with inlet screen. Pump is rated at 7 GPM and will empty full drain in less than 4 minutes.

P/N

42071

Same as P/N 42070 above except has an on board 3/8”

Double Diaphragm Pump and 6’ discharge hose with curved spout. Flow rate of 5 GPM @ 100 PSI will empty full drain in less than 5 minutes. Includes ‘T’ strainer to protect pump.

“T” Strainer with

30 Mesh Screen

P/N

950004

Evac kit only. 3/8” Double Diaphragm Pump, mounting hardware, ‘T’ strainer and 6’ discharge hose with curved spout. Flow rate of 5 GPM @ 100 PSI will empty full drain in less than 5 minutes.

P/N

950092

1/2” Double Diaphragm Pump Kit with wall mounting bracket, 1/2” x 6’ suction hose, 1/2” x 2’ discharge hose, air filter regulator w/gauge, 3/8” x 6’ air hose and 1/4” air coupler set and 1/2” dry break coupler set. Used to quickly empty low profile oil drain in less than 3 minutes

(approximately 10 GPM @ 100 PSI).

Does not include drain.

Shown as example only.

98

800.894.3572

USED OIL DRAINS

P/N

2400-20J

8 gallon capacity Oil Drain with translucent body to allow easy viewing of oil level. Height is adjustable from

48” to 71”. Hand grips are provided on top and bottom of container for convenient emptying by hand. Unit is supplied with four ball bearing casters for mobility.

P/N

2400-19J

18 Gallon Oil Drain features a translucent polyethylene body to allow easy viewing of oil level.

18” funnel height is adjustable from 48” to 71”and is supplied with ball bearing casters for mobility. Unit may be emptied via 3/4” drain valve, by hand via spout or by optional oil drain pump kit, P/N 2400-26.

P/N

2400-37

Low-Boy Oil Drain is constructed of heavy-duty polyethylene that will not rust or dent. Used oil is emptied with a 115 VAC electric pump, unit rolls easily on 4 lubricated recessed casters. Overall dimensions are 8” H x 25” W x 46” L and has a 17 gallon capacity.

P/N

2400-27

Optional oil drain kit for use with

2400-19J oil drain. Kit includes rotary hand pump, suction tube and

6’ discharge ose with curved spout.

NOTE: Drain not included.

P/N

2400-18J

Oversized Drain Pan fits 8 and 18 gallon drains shown, 24”

W x 37” L, constructed of heavy duty polyethylene.

P/N 2400-27 shown with

18 gallon drain P/N 2400-19J www.liquidynamics.com

99

USED OIL DRAINS AND TANKS

P/N

42075

Rolling Oil Drain Pan is fabricated from 14 gauge welded steel with a capacity of 34 gallons. Rollers have ball bearing action for smooth operation and are adjustable from 30” to

44” wide to fit most pit systems. Has utility shelf area, removable grill and interior baffle to reduce sloshing.

Supplied with front & rear 1 1 ⁄

2

” NPTF drain fittings.

P/N

901060-CH

275 Gallon Used Oil Tank for bulk storage, has a convenient hatch opening with cover to allow filter elements to be drained prior to disposal. Hatch opening is also handy for empting small containers of used ol. Tank has two 2” bung openings and one 3” bung opening, along with a 1” drain.

Powder coated for durability.

100

P/N

950027-55

3/4” D.D. Pump w/vertical inlet manifold kit to fit 55 gallon drum. Kit includes “close” nipple, suction pipe and double tap with 3/8” return port for use with thermal expansion valve kit.

P/N

950027-275

3/4” D.D. Pump w/vertical inlet manifold to fit 275 gallon tank. Has 44” long suction pipe,

“close” nipple and double tap with 3/8” return port for use with thermal expansion valve kit.

Schedule 80 PVC suction pipe can easily be trimmed to fit shorter tank depths.

800.894.3572

OIL EXTRACTORS

These fluid extractors are a reliable and efficient method for removing fluids from most any engine, transmission, differential, transfer case or gearbox. They are extremely easy to operate and maintain and are ideal for use with automobiles, trucks, tractors, farm machinery, marine engines, forklifts, industrial machinery and various other small engines. A shop air supply at approximately 100 PSI @ 15 CFM is all that is required to create a vacuum. All extractors are supplied with a set of 6 flexible probes, 3 adapters (to fit Mercedes, BMW, Citroen and VW), 12’ suction hose and 6’ discharge hose

(not included in model 24224T). Units have powder coat finish for durability and long life. Not for use with flammable or explosive fluids.

P/N

24224T

Fluid Extractor with 6-gallon tank capacity. This unit is emptied manually by lifting and tipping unit. Has wheels and handle for easy mobility.

Dimensions, 13” W x 11” D x 37” H, empty weight 31 pounds.

P/N

24270

Fluid Extractor with 21-gallon capacity, has level gauge and

6’ discharge hose. Unit is self-evacuating by pressurizing tank with approximately 10 PSI. Dimensions, 18” W x 21” D x 39” H, empty weight 70 pounds.

P/N

24271

Fluid Extractor with 21-gallon capacity, supplied with 2 gallon transparent bowl to allow operator to check quantity and quality of oil prior to discharging into tank below. Dimensions, 18” W x

21” D x 56” H, empty weight 85 pounds.

www.liquidynamics.com

101

OIL EXTRACTORS

P/N

24272

Combination extractor and oil drain with 21-gallon tank capacity. Used oil is discharged by pressurizing tank to approximately 10 PSI. Comes complete with a set of 6 flexible probes and 3 adapters. Maximum drain pan extension height is 64”. Dimensions, 18” W x 21” D x 46” H minimum, empty weight 84 pounds.

P/N

24273

Combination extractor and oil drain with 2 gallon transparent bowl. Has 21-gallon tank capacity and is supplied complete with a set of 6 flexible probes and 3 adapters. Maximum drain pan extension height is 64”. Dimensions, 18” W x 21”

D x 56” H minimum, empty weight 91 pounds.

P/N

900212

Replacement suction hose,

3/8” x 12’, wire reinforced.

For use with P/Ns 24224T,

24270, 24271, 24272 and

24273 extractors.

P/N

S3331

Replacement suction hose assembly for use with oil extractors P/N

24224T, 24270,

24271, 24272 and

24273. Includes 3/8” x 12 wire reinforced hose, handle, ball valve and suction fitting complete with

‘O’ rings.

102

P/N

S3344

Set of replacement ‘O’ rings to fit suction probe assembly P/N S3331. For use on all

Liquidynamics oil extractors.

800.894.3572

P/N

24304

OIL EXTRACTOR ACCESSORIES

Flexible Probe .020” (5 mm) Dia., 27

1

2

” (700 mm) Length

P/N

24305

Metal Probe .020” (5 mm) Dia., 27 1 ⁄

2

” (700 mm) Length

P/N

24316

Flexible Probe .024” (6 mm) Dia., 27 1 ⁄

2

” (700 mm) Length

P/N

24306

Metal Probe .024” (6 mm) Dia., 27 1 ⁄

2

” (700 mm) Length

P/N

24307

Flexible Probe 0.28” (7 mm) Dia., 39.4” (1000 mm), Length

P/N

24308

Flexible Probe 0.31 (8 mm) Dia., 27 1 ⁄

2

” (700 mm) Length

P/N

24310

Flexible Probe 0.20” (5 mm) Dia., 59” (1500 mm) Length

P/N

24426

Flexible Probe 0.24” (6 mm) Dia., 59” (1500 mm) Length

P/N

24427

Flexible Probe 0.28” (7 mm) Dia., 59” (1500 mm) Length

P/N

24428

Flexible Probe 0.31” (8 mm) Dia., 59” (1500 mm) Length

P/N

24450

Flexible Probe 0.47” (12 mm) Dia., 27

1

2

” (700 mm) Length

P/N

24307

P/N

24306

P/N

24308

P/N

24316

P/N

24305

P/N

24304

P/N

950054

Probe Container

Kit with Wall

Mount Bracket

P/N

24300

Connector for

VW Engine

P/N

24302

Connector for

BMW Engine

P/N

24303

Connector for

Citroen Engine

P/N

900210

Connector for OMC

Marine Engine

P/N

900235

Connector for Marine

Outboard Engines

P/N

900199

Connector for

Mastercraft

Marine Engine www.liquidynamics.com

P/N

950050

Kit of probes includes:

• P/N 24304 Flexible Probe

• P/N 24305 Metal Probe

• P/N 24316 Flexible Probe

• P/N 24306 Metal Probe

• P/N 24307 Flexible Probe

• P/N 24308 Flexible Probe

103

P/N

100550 High/Low

Tank Alarm

Self contained tank monitor designed for use on single or double wall aboveground tanks. Float sensor can easily be adjusted for sensor depth from 2” to 10’ and may be used to monitor interstitial space of double walled tanks. When activated to an alarm condition, the alarm sounds a 103 decibel siren for up to 4 days with a fresh 9 volt battery. An optional transformer, P/N

100556 may be connected to eliminate battery operation. Intended for indoor use.

TANK MONITORING

Air Shutoff Valve

P/N

100552

Air Shutoff Valve for high tank level conditions.

Operates mechanically without any power supply, ensuring positive air pump shutoff. Has operating pressure range of 50 to 150 PSI.

P/N

100556 UL Transformer

12 VDC Transformer has permanent mounting screw fitting to ensure secure connection to 115 VAC outlet. Unit is self re-setting if overloaded and is UL listed. For use with P/N 100550.

P/N

100551

This three piece package will monitor either a high or low tank level. When the preset float is activated, a 103 decibel siren will sound and a strobe light will flash and activate an optional solenoid, P/N 100554, if installed. The control panel is mounted indoors while the remote sensor may be mounted outdoors and fits a standard 2” bung opening. System can drive up to 10 solenoid valves, P/N 100554, and also includes a 12 VDC UL transformer.

104

P/N

100554L Solenoid Valve

Low voltage solenoid valve for use with P/N 100551 Tank

Monitor, to shut off pump air supply when in the alarm condition. May be located up to 350’ away from P/N 100551

Tank Monitor. Has rugged die cast aluminum housing and includes transformer.

800.894.3572

OIL FILTER CRUSHERS

Air over hydraulic filter crushers for use with automotive and heavy duty truck type filters. Heavy aluminum frame cabinet surrounds the high pressure hydraulic hose, shielding components from damage and for added personal safety. Unitized construction allows easy access for maintenance while the specially designed door channel prevents leakage, keeping oil in the chamber and not on the floor.

It is easy to operate, load the filter and close the door to activate the crushing cycle of approximately 55 seconds.

Specifications for the two available models are shown below.

P/N

830151D

Oil Filter Crusher for use with automotive type filters. Has 7 1 ⁄

2

” filter height capacity and generates 10 tons of crushing force.

Operates on shop air with the use of an optional 1/4” air filter/regulator

P/N 540201-G

P/N

830163D

Handy and compact wall bracket mount for use with the Automotive

Filter Crusher, P/N 830151D. Wall anchors not included.

P/N

830153D

Oil Filter Crusher for use with heavy duty truck filters up to 13” tall and 6” diameter.

Generates 15 tons of crushing force therefore reducing filter size by 75% and removing over 95% of the residual oil. Filter crushers require the use of an optional 1/4” air filter/regulator P/N 540201-G.

P/N

830160D

Compact floor stand for use with either the automotive or truck filter crusher. Stand is sized to accommodate a 5 gallon pail and measures 16”W x 18”D x 31”H.

Specifications:

Height

Width

Max Filter Height

Max Filter Diameter

Crushing Force

Pump Type

P/N 830151D

28

1

2

12 3 ⁄

4

7

1

2

6”

10 Tons

Air/Hydraulic

P/N 830153D

40”

12 3 ⁄

4

13”

6”

15 Tons

Air/Hydraulic

P/N

830161D

Full sized floor stand designed to accommodate a 16 gallon drum and support the automotive or truck oil filter crushers. Measures 23” W x

23” D x 36” H.

P/N

830164

Filter Crusher Tank Mount Kit allows filter crushers,

P/N 830151D or 830153D, to be mounted onto bulk storage tank. Crushed filters drain directly into storage tank eliminating need to transfer used oil from drums or pails.

Includes all necessary hardware to mount filter crushers onto tank.

www.liquidynamics.com

P/N

830162D

Deluxe floor stand includes an area to drain used filters prior to crushing. Designed for use with either the automotive or truck filter crushers. Will accommodate a 16 gallon drum. Measures 28”

W x 23” D x 37” H.

105

FUEL HANDLING

P/N

560203

25 Gallon Gas Caddy features heavy duty metal construction with fill level gauge and an industrial grade two-way rotary hand pump that can be used to siphon or dispense gasoline or diesel fuel. The Caddy is supplied with a ground wire and clamp, fire-screened vent and filler neck combination and a set of decals for contents identification.

This Gas Caddy complies with OSHA guidelines and is FM approved.

Makes fuel transfer safe and easy. Ideal for auto repair shops, motorcycle shops, salvage yards and marinas where fuel tanks need to be drained before repair or removal.

Dimensions: 46” H (with pump) x 21” W x 21” D

P/N

560204

This economical 25 Gallon Gas Caddy is designed for fuel storage and transfer via gravity flow and provides a safe and easy way to fuel watercraft, ATV’s, lawn and other motorized equipment. It is constructed of high strength cross linked polyethylene and features a molded-in handle which also serves as a secure rest when the unit is being transported lying down. 10” semi-pneumatic wheels allow easy movement over almost any surface. Caddy includes a 3/4” x 10’ discharge hose and heavy duty spring loaded nozzle.

P/N

560205

Two way pumping capability of this 25 gallong Gas Caddy allows it to be used for fuel transfer as well as siphoning. The unit is constructed of high strength, cross linked polyethylene for excellent durability and features a molded-in handle which also serves as a secure rest when in the horizontal position. 10” semi-pneumatic wheels allow easy movement over almost any surface. Caddy comes with heavy duty hand pump for siphoning or dispensing and includes 3/4” x 10’ hose and spout.

106

800.894.3572

FUEL HANDLING

Standard Duty

Pumps and Meters

Features

Warranty

Pump body construction

Maximum flow rate with factory provided hose and nozzle

Rotor composition

Explosion-proof motor with two sealed ball bearings

Amps

Thermal overload protection

Inlet

Outlet

Threaded tank adapter

Bypass valve

Built-in strainer

Motor approvals

Pump may be padlocked

Nozzle hanger

Duty cycle

P/N 560066

Model SD1202

P/N 560066A

Model SD1202A

12 Volt DC Pump 12 Volt DC Pump w/ Automatic Nozzle

One Year

Cast Iron

One Year

Cast Iron

P/N 560072

Model SD602

P/N 560072A

Model SD602A

115 Volt AC Pump 115 Volt AC Pump w/Automatic Nozzle

One Year

Cast Iron

One Year

Cast Iron

13 GPM (49 LPM) 10 GPM (38 LPM) 13 GPM (49 LPM) 10 GPM (38 LPM)

Bronze/Iron Bronze/Iron Bronze/Iron Bronze/Iron

1/4 HP

20 AMP

Yes

1” NPT

3/4” NPT

2” NPT

Yes

Yes

U/L, cU/L

Yes

Yes

30 minute

1/4 HP

20 AMP

Yes

1” NPT

3/4” NPT

2” NPT

Yes

Yes

U/L, cU/L

Yes

Yes

30 minute

1/4 HP

1.5 AMP

Yes

1” NPT

3/4” NPT

2” NPT

Yes

Yes

U/L, cU/L

Yes

Yes

30 minute

1/4 HP

1.5 AMP

Yes

1” NPT

3/4” NPT

2” NPT

Yes

Yes

U/L, cU/L

Yes

Yes

30 minute

Available Options

807CMK Meter Kit (gal or liters) Yes

Automatic Nozzle Yes

3/4” Manual Nozzle Standard

Particulate & Hydrosorb Filter Kits Yes

Box Contents

Suction pipe 15 to 55 gal. drums 2-Piece Polymer

15’ (4.6m) – 3 wire power cable Yes

3/4” Hose with static wire

3/4” Manual Nozzle

3/4” Automatic Nozzle

10 Feet (3m)

Yes

Applications

Compatible fluids

(Not to be used with fluids that have a flash point of 100°F or less.)

Diesel Fuel, gasoline, kerosene, mineral spirits

Yes

Standard

Yes

Yes

2-Piece Polymer

Yes

10 Feet (3m)

Yes

Diesel Fuel, gasoline, kerosene, mineral spirits

Yes

Yes

Standard

Yes

3-Piece Polymer

10 Feet (3m)

Yes

Diesel Fuel, gasoline, kerosene, mineral spirits

Yes

Standard

Yes

Yes

3-Piece Polymer

10 Feet (3m)

Yes

Diesel Fuel, gasoline, kerosene, mineral spirits

These pumps shall not be used for direct fueling of aircraft without filters and separators necessary to ensure product purity.

www.liquidynamics.com

107

FUEL HANDLING

Heavy Duty DC

Pumps and Meters

Features

Warranty

Construction pump housing

Maximum flow rate with factory provided hose and nozzle

Rotor composition

Explosion-proof motor with two sealed ball bearings

Amp draw from battery

Thermal overload protection

Inlet

Outlet

Threaded tank adapter

Internal bypass valve

Built-in strainer

Motor approvals

Spring driven diaphragm

Built-in check valve

Pump may be padlocked

Nozzle hanger

Machined carbon vanes

Duty cycle

P/N 560012

Model 1210C

12 Volt DC

Rotary Vane Pump

Two Year

Cast Iron

15 GPM (57 LPM)

Iron

1/4 HP

20 AMP

Yes

1” NPT

3/4” NPT

2” NPT

Yes

Yes

U/L, cU/L, CE

Yes

Yes

Yes

Yes

30 minute

Available Options

Model 800C/820 meter (gal or liters) Yes (Series 800C)

Series 900 Meter (gallons or liters) —

Automatic Nozzle

Ball valve nozzle for chemicals

Santoprene diaphragm for increased chemical compatibility

Yes

24 Volt 1/4 HP

Series FR2400C

10 Amp motor

Box Contents

Telescoping steel suction pipe 1” NPT Yes

U/L hose with static wire

Nozzle

18 (4.6m) 3-wire power cable

3/4” x 12’ (3.7m)

3/4” Manual

Yes

Applications

Compatible fluids

(Not to be used with fluids that have a flash point of 100°F or less)

P/N 560062

Model FR4210D

12 Volt DC

High Flow Pump

Two Year

Cast Iron

20 GPM (76 LPM)

Iron

1/4 HP

22 AMP

Yes

1” NPT

1” NPT

2” NPT

Yes

Yes

U/L, cU/L, CE

Yes

Yes

Yes

Yes

30 minute

No

Yes

Series FR4400

13 Amp motor

Yes

1” x 12’ (3.7m)

1” Manual

Yes

P/N 560045

Model FR410

12 Volt DC

Diaphragm Pump

Two Year

Polypropylene

13 GPM (49 LPM)

(Dependent on viscosity)

1/4 HP

20 AMP

Yes

1” NPT

1” NPT

2” NPT

Not required

No

U/L, cU/L, CE

Yes

Yes

No

Yes

N/A

30 minute

Yes (Series 800C/820)

Yes

Yes

Series 200

10 Amp motor

Yes

1” x 12’ (3.7m)

1” Manual

Yes

Diesel Fuel, gasoline, kerosene, mineral spirits,

Stoddard solvent and heptane

Diesel Fuel, gasoline, kerosene, mineral spirits,

Stoddard solvent and heptane

Ethylene Glycol, diesel fuel grease, hydraulic oil, kerosene, motor oil, and water

108

800.894.3572

FUEL HANDLING

Heavy Duty AC

Pumps and Meters P/N 560026

Model FR610C

P/N 560014

Model FR700

P/N 560042/560027

Model FR300/FR310

P/N 560024

Model FR450

Features

Warranty

115 Volt AC

Pump

Two Year

115 Volt AC

High Flow Pump

Two Year

115 Volt AC

Super High Flow

Two Year

115 Volt AC

Diaphragm Pump

Two Year

Pump body construction Cast Iron Cast Iron Cast Iron Polypropylene

Maximum flow rate with factory 15 GPM (57 LPM) 20 GPM (76 LPM)

1/2 HP: (FR300)

provided hose and nozzle 20 GPM (76 LPM)

13 GPM (49 LPM)

(Dependent on

3/4 HP: (FR310)

35 GPM (132 LPM) viscosity)

Rotor composition Iron

Expl. proof motor w/ ball bearings 1/4 HP

AC / hertz 115 Volt / 60Hz

Thermal overload protection

Inlet

Outlet

Tank Adapter

Approvals

Yes

1” NPT

3/4” NPT

2” NPT

UL, cUL Listed

Iron

1/3 HP

115 Volt / 60 Hz

Iron

1/2 HP & 3/4 HP

N/A

1/4 HP

Dual Voltage 115 Volt / 60 Hz

115/230 VAC / 50-60Hz

Yes

1” NPT

3/4” NPT

Yes

1 1 ⁄

2

“ NPT

1” NPT

Yes

1” NPT

1” NPT

2” NPT 2” NPT 2” NPT

UL, cUL, CSA Listed UL, cUL, CSA Listed UL, cUL (motor)

Pump may be padlocked

Spring driven diaphragm

Bypass valve & built-in strainer

Yes

Yes

Integral check valve Yes

Nozzle boot to protect from dirt Yes

Machined carbon vanes Yes

Duty cycle 30 minute

Yes

Yes

Yes

Yes

Yes

30 minute

Yes

Yes

Yes

Yes

Yes

30 minute

Yes

Not required

No

Yes

N/A

30 minute

Available Options

Model 800 meter (gal. or liters) Yes

Series 900 meter (gal. or liters) —

Auto nozzles and nozzle hangers Yes

Ball valve nozzle for chemicals —

Pedestal for underground tanks —

Yes

Yes

Yes

Yes

Yes

Yes

Santoprene diaphragm for increased chemical compatibility

230 Volt AC Explosion

Proof Motor

— —

Series FR650-X661, Model 700G

50Hz with 1” hose, UL listed 1/3 Hp

Standard

CE Marked (18 GPM/LPM) Motor 230 VAC 50/60Hz

Australian & EX approved models Yes Yes Yes

Box Contents

Telescoping steel suction pipe

U/L hose with static wire

Nozzle

Yes

3/4” x 12’ (3.7m)

3/4” Manual

3/4” x 12’ (3.7m)

3/4” Manual

1” x 12’ (3.7m)

1” Manual

Yes

Yes

Yes

Model FR450E

1/4 HP motor

230 VAC 50Hz

Yes

1” x 12’ (3.7m)

3/4” Manual

Applications

Compatible fluids

(Not to be used with fluids that have a flash point of 100°F or less)

Diesel Fuel, gasoline, kerosene, mineral spirits, Stoddard solvent and heptane

Diesel Fuel, gasoline, kerosene, mineral spirits, Stoddard solvent and heptane

Diesel Fuel, gasoline, kerosene, mineral spirits, Stoddard solvent and heptane

Ethylene Glycol, diesel fuel grease, hydraulic oil, kerosene, motor oil, and water www.liquidynamics.com

109

FUEL HANDLING – HAND PUMPS

MODEL

FR1211C,

P/N 560060

Model FR1210C Pump with

FR807C Meter installed, 20 GPM

MODEL

FR4211D,

P/N 560064

Model FR4210D Pump with

FR901 Meter installed, 20 GPM

MODEL

FR31,

P/N 560028

Heavy Cast Iron quart stroke Pump that reliably and accurately dispenses one quart with each handle rotation. Rack and pinion design allows for easy calibration and provision for padlock feature.

Includes swing return drain tube and telescoping suction pipe.

MODEL

FR701,

P/N 560015

115 VAC Pump FR700 with

FR807C Meter installed, 20 GPM

MODEL

FR301,

P/N 560043

Model FR300 Pump with

FR901 Meter installed, 20 GPM

MODEL

FR311,

P/N 560022

Model FR310 Diesel Fuel Pump with FR901 Meter installed,

20 GPM

MODEL

MA-20,

P/N 560008

Polypropylene Piston Pump uses Buna-N seals for transfer of fluids such as engine oil, gear oil, antifreeze and similar fluids compatible with materials of construction.

Fits drums up to 55 gallons. Approx.

12 strokes/gal.

MODEL

MA-5R,

P/N 10005R

Cast iron Rotary Hand Pump, two vane construction, for use with lubricating oils.

Comes complete with 2” bung adapter and three piece steel suction pipe. Not recommended for use with gasoline. Approx. 20 revolutions/gal.

MODEL

FR152,

P/N 560000

Lightweight cast aluminum Piston Hand

Pump uses a stainless steel inner liner to prevent wear of cylinder. Pump delivers up to 20 gallons per 100 strokes and is ideal for use with gasoline, diesel fuel and light oils. Includes anti-siphoning device, padlock feature, bung adapter and telescoping suction pipe.

MODEL

FR112,

P/N 560003

Cast aluminum Rotary Vane Pump suitable for pumping medium viscosity liquids as well as oils, gasoline and diesel fuels. Rotary action allows smooth, continuous fluid transfer at up to 10 gallons per 100 revolutions. Complete with telescoping suction pipe, bung adapter, 8 ft. nitrile hose with nozzle and vacuum breaker to prevent siphoning.

110

800.894.3572

MODEL

LM-301,

P/N 100403

FUEL HANDLING ACCESSORIES

Economical nutating disc meter for use with fluids such as gasoline and diesel fuel. The large easy to read 3 digit mechanical display may be reset on either the left or the right side which allows more flexibility upon installation.

The display orientation may be rotated in increments of 90 degrees to accommodate various plumbing requirements. Flow range is from 5 to 30 GPM with an accuracy to within

±1% and an operating pressure of 50 PSI.

Maximum resettable batch total is 99.9 with five digit totalizer. Inlet and outlet are 1” NPTF. Not for gravity flow use.

MODEL

LM-401,

P/N 100407

Four digit resettable batch total of 999.9

gallons allows fueling of large vehicles.

Flow range and other specifications are same as model LM-301. Not for gravity flow use.

MODEL

FR807CMK,

P/N 560034-CMK

Three digit meter kit to fit standard duty pump Models

SD1202 and SD602.

MODEL

FR807C,

P/N 560034

Industry standard nutating disc meter for use with gasoline, diesel fuel and similar fluids. Easy calibration allows accuracy of up to ±1%. Flow range of

5 to 20 GPM via 3/4” NPTF ports, pressure rated to 50 PSI, 3 digit resettable total with 6 digit totalizer.

MODEL

FR806C,

P/N 560034-V1

Same as P/N 560034 above except designed for use with gravity flow above ground tanks. Includes 1” NPTF inlet strainer.

MODEL

LS-100,

P/N 100415

Stainless steel 400 mesh strainer for use with models LM-301 and

LM-401 mechanical meters. Strainer may be easily removed for cleaning.

MODEL

FR901,

P/N 560001

High flow nutating disc meter with a flow range of 6 to 40 GPM and ±2% accuracy. Resettable batch total displays four digits.

P/N

560050

3/4” Inlet automatic unleaded fuel nozzle, UL listed.

P/N

560048

3/4” manual nozzle with unleaded spout and hook, UL listed.

P/N

560051

1” Inlet automatic diesel fuel nozzle, UL listed.

www.liquidynamics.com

P/N

560052

1” manual nozzle, diesel spout with hook, UL listed.

111

10002 . . . . . . . . . . . .34

10002N . . . . . . . . . . .34

10005R . . . . . . .32,110

10006C . . . . . . . . . . .34

10007 . . . . . . . . . . . .33

10007C . . . . . . . . . . .35

10007-S1 . . . . . . . . .35

10007-S2 . . . . . . . . .35

10007-S3 . . . . . . . . .33

10009 . . . . . . . . . . . .32

10009T . . . . . . . . . . .32

10010 . . . . . . . . . . . .32

10010M . . . . . . . . . .32

10010P . . . . . . . . . . .32

100104 . . . . . . . . . . .50

10011 . . . . . . . . . . . .82

10011BP . . . . . . . . . .82

100113-FA . . . . . . . .47

100113-FM . . . . . . . .47

100113-FMH . . . . . . .47

100113-HM . . . . . . .47

100113-HMH . . . . . .47

100113-RA . . . . . . . .47

100113-RM . . . . . . .47

100113-RMH . . . . . .47

100113T-FA . . . . . . .47

100113T-FM . . . . . . .47

100113T-FMH . . . . . .47

100113T-HM . . . . . . .47

100113T-HMH . . . . .47

100113T-RA . . . . . . .47

100113T-RM . . . . . . .47

100113T-RMH . . . . .47

10012 . . . . . . . . . . . .32

10012-C . . . . . . . . . .32

10012-K . . . . . . . . . .32

10013 . . . . . . . . . . . .82

10013BP . . . . . . . . . .82

10015 . . . . . . . . . . . .33

10016 . . . . . . . . . . . .32

10031 . . . . . . . . . . . .34

100132 . . . . . . . . . . .48

100150 . . . . . . . . . . .48

100160 . . . . . . . . . . .48

100161 . . . . . . . . . . .48

100162 . . . . . . . . . . .48

100163 . . . . . . . . . . .48

100164 . . . . . . . . . . .48

100351-FA . . . . . . . .43

100351-FM . . . . . . . .43

100351-FMH . . . . . . .43

100351-RM . . . . . . .43

100351-RMH . . . . . .43

100351-RSA . . . . . . .43

100360 . . . . . . . . . . .50

100366 . . . . . . . . . . .50

100370 . . . . . . . . . . .50

100371 . . . . . . . . . . .50

100372 . . . . . . . . . . .50

100380 . . . . . . . . . . .50

100381 . . . . . . . . . . .50

100382 . . . . . . . . . . .50

100385 . . . . . . . . . . .49

100390-HMH . . . . . .48

100390-RMH . . . . . .48

100395 . . . . . . . . . . .49

100395-FA . . . . . . . .42

100395-FM . . . . . . . .42

100395-FMH . . . . . . .42

100395-HM . . . . . . .42

NUMERIC INDEX

100395-HMH . . . . . .42

100395-RA . . . . . . . .42

100395-RM . . . . . . .42

100395-RMH . . . . . .42

100403 . . . . . . . . . .111

100407 . . . . . . . . . .111

100415 . . . . . . . . . .111

100450 . . . . . . . . . . .80

100451 . . . . . . . . . . .80

100452 . . . . . . . . . . .80

100454 . . . . . . . . . . .80

100460 . . . . . . . . . . .80

10050 . . . . . . . . . . . .82

100550 . . . . . . . . . .104

100551 . . . . . . . . . .104

100552 . . . . . . . . . .104

100554L . . . . . . . . .104

100555-AS . . . . . . . .54

100556 . . . . . . . . . .104

100600 . . . . . . . . . . .49

100600-FA . . . . . . . .45

100600-FM . . . . . . . .45

100600-FMH . . . . . . .45

100600-HM . . . . . . .45

100600-HMH . . . . . .45

100600-RA . . . . . . . .45

100600-RM . . . . . . .45

100600-RMH . . . . . .45

100701 . . . . . .38,39,40

100702 . . . . . .38,39,40

100703 . . . . . .38,39,40

100704 . . . . . .38,39,40

100705 . . . . . .38,39,40

100706 . . . . . .38,39,40

100707 . . . . . .38,39,40

100708 . . . . . .38,39,40

100709 . . . . . .38,39,40

100710 . . . . . .38,39,40

100715 . . .38,39,40,50

10113 . . . . . . . . . . . .82

11148T . . . . . . . .73,74

11149 . . . . . . . . . . . .81

11174T . . . . . . . .73,74

11195T . . . . . . . .73,74

11196 . . . . . . . . . . . .81

11348 . . . . . . . . .73,74

11349 . . . . . . . . . . . .81

11374 . . . . . . . . .73,74

11395 . . . . . . . . .73,74

11396 . . . . . . . . . . . .81

11595 . . . . . . . . .73,74

11748 . . . . . . . . .73,74

11848 . . . . . . . . .73,74

12001T . . . . . . . . . . .76

12003T . . . . . . . . . . .76

12031T . . . . . . . . . . .75

12037HV . . . . . . . . . .75

12037T . . . . . . . . . . .75

12058T . . . . . . . . . . .75

12059 . . . . . . . . . . . .75

12063 . . . . . . . . . . . .75

12070T . . . . . . . . . . .76

12070TS . . . . . . . . . .76

12070TZ . . . . . . . . . .76

12071T . . . . . . . . . . .76

12072T . . . . . . . . . . .76

12072TS . . . . . . . . . .76

12072TZ . . . . . . . . . .76

12073T . . . . . . . . . . .76

12085T . . . . . . . . . . .76

12085TS . . . . . . . . . .76

12085TZ . . . . . . . . . .76

12087 . . . . . . . . . . . .76

12087-20 . . . . . . . . .76

12087-24 . . . . . . . . .76

12087-36 . . . . . . . . .76

12087-40 . . . . . . . . .76

12112T . . . . . . . . . . .76

12132T . . . . . . . . . . .75

12136 . . . . . . . . . . . .75

12138HV . . . . . . . . . .75

12138T . . . . . . . . . . .75

12160T . . . . . . . . . . .75

12161 . . . . . . . . . . . .75

12163 . . . . . . . . . . . .75

13027T-S1 . . . . . . . .77

13051T-S1 . . . . . . . .77

13062T-S1 . . . . . . . .77

13063T-S1 . . . . . . . .77

13070-S1 . . . . . . . . .78

13070-S3 . . . . . . . . .78

13071T-S1 . . . . . . . .77

13072T-S1 . . . . . . . .77

20001-S7 . . . . . . . . .15

20001-S8 . . . . . . . . .15

20001T . . . . . . . . . . .4,5

20001T-S2 . . . . . . . . .5

20001TSS . . . . . . . . . .9

20011-Y . . . . . . . . . .10

20012-V . . . . . . . . . .10

20012-Y2 . . . . . . . . .10

20013-Y . . . . . . . . . .10

20013-Y2 . . . . . . . . .10

20015-Y . . . . . . . . . .10

20015-Y2 . . . . . . . . .10

20015-YV . . . . . . . . .10

20016-Y . . . . . . . . . .10

20017-Y . . . . . . . . . .10

20025-S1 . . . . . . . . .22

20025-V . . . . . . . . . .10

20073-S16 . . . . . . . .28

20073-S17 . . . . . . . .28

20073-S18 . . . . . . . .28

20073-S41 . . . . . . . .28

20073-S41-V1 . . . . .28

20073-S42 . . . . . . . .28

20073-S42-V1 . . . . .28

20073T . . . . . . . . . . .4,5

20073T-S2 . . . . . . . . .5

20094-S31 . . . . . . . .29

20094-S32 . . . . . . . .29

20094-S9 . . . . . . . . .15

20094T . . . . . . . . . . .4,5

20094T-S2 . . . . . . . . .5

20094T-S4 . . . . . . . .15

20094TSS . . . . . . . . . .9

21073-S16 . . . . . . . .28

21073-S17 . . . . . . . .28

21073-S18 . . . . . . . .28

21073T . . . . . . . . . . .4,6

21073T-S2 . . . . . . . . .6

21094-S9 . . . . . . . . .15

21094T . . . . . . . . . . .4,6

21094T-S2 . . . . . . . . .6

21094T-S4 . . . . . . . .15

21100-S7 . . . . . . . . .15

21100-S8 . . . . . . . . .15

21100T . . . . . . . . . . .4,6

21100T-S2 . . . . . . . . .6

21200 . . . . . . . . . . . .4,6

21200-S1 . . . . . . . . . .6

21300 . . . . . . . . . . . .4,6

21300-S1 . . . . . . . . . .6

21400 . . . . . . . . . . . .4,6

21400-S2 . . . . . . . . . .6

21500 . . . . . . . . . . . .4,6

21500-S2 . . . . . . . . . .6

22156 . . . . . . . . . . . .25

22157 . . . . . . . . . . . .25

22158 . . . . . . . . . . . .25

22159 . . . . . . . . . . . .25

22242 . . . . . . . . . . . .25

22243 . . . . . . . . . . . .25

22254 . . . . . . . . . . . . .7

22255T-08 . . . . . . . . .7

22255T-16 . . . . . . . . .7

22255T-24 . . . . . . . . .7

22255T-35 . . . . . . . . .7

22268 . . . . . . . . . . . . .7

23101 . . . . . . . . . . . .24

23102 . . . . . . . . . . . .24

23103 . . . . . . . . . . . . .9

23104 . . . . . . . . . . . . .9

23105 . . . . . . . . . . . .24

23105A . . . . . . . . . . .24

2400-14 . . . . . . . . . .56

2400-18J . . . . . . . . .99

2400-19J . . . . . . . . .99

2400-20T . . . . . . . . .99

2400-27 . . . . . . . . . .99

2400-37 . . . . . . . . . .99

24127 . . . . . . . . . . . .36

24128 . . . . . . . . . . . .36

24128MQ . . . . . . . . .36

24130 . . . . . . . . . . . .36

24130MQ . . . . . . . . .36

24132 . . . . . . . . . . . .36

24135 . . . . . . . . . . . .36

24135MQ . . . . . . . . .36

24136-06 . . . . . . . . .36

24175 . . . . . . . . . . . .97

24224T . . . . . . . . . .101

24270 . . . . . . . . . . .101

24271 . . . . . . . . . . .101

24272 . . . . . . . . . . .102

24300 . . . . . . . . . . .103

24302 . . . . . . . . . . .103

24303 . . . . . . . . . . .103

24304 . . . . . . . . . . .103

24305 . . . . . . . . . . .103

24306 . . . . . . . . . . .103

24307 . . . . . . . . . . .103

24308 . . . . . . . . . . .103

24310 . . . . . . . . . . .103

24316 . . . . . . . . . . .103

24426 . . . . . . . . . . .103

24427 . . . . . . . . . . .103

24428 . . . . . . . . . . .103

24450 . . . . . . . . . . .103

27273 . . . . . . . . . . .102

30200 . . . . . . . . . . . .33

30200-C . . . . . . . . . .35

30200-S1 . . . . . . . . .35

30200-S9 . . . . . . . . .35

30200-S10 . . . . . . . .35

30200-S11 . . . . . . . .35

30200-S2 . . . . . . . . .35

30200-S3 . . . . . . . . .33

30200-S6 . . . . . . . . .35

30200-S7 . . . . . . . . .35

30200-S8 . . . . . . . . .35

32071 . . . . . . . . . . . .4,5

32071-S1 . . . . . . . . . .5

32072 . . . . . . . . . . . .4,5

32072-S1 . . . . . . . . . .5

32091 . . . . . . . . . . . .4,5

32091-S1 . . . . . . . . . .5

32091-S7 . . . . . . . . .15

32091SS . . . . . . . . . . .9

32093-S21 . . . . . . . .17

32093-S22 . . . . . . . .17

32093-S23 . . . . . . . .17

32095 . . . . . . . . . . . .4,5

32095-S1 . . . . . . . . . .5

32095SS . . . . . . . . . . .9

32097-S1 . . . . . . . . . .9

32099-S1 . . . . . . . . . .9

32099-S2 . . . . . . . . . .9

32107 . . . . . . . . . . . .48

32107-FA . . . . . . . . .48

32107-FM . . . . . . . . .48

32107-RA . . . . . . . . .48

32107-RM . . . . . . . . .48

32108 . . . . . . . . . . . .88

33221 . . . . . . . . . . . .12

33221-S1 . . . . . . . . .14

33221-S3 . . . . . . . . .14

33222 . . . . . . . . . . . .12

33250 . . . . . . . . . . . .12

33261 . . . . . . . . . . . .88

33265 . . . . . . . . . . . .88

33265-20SG . . . . . . .88

33267 . . . . . . . . .87,88

33267-20CG . . . .87,88

33271 . . . . . . . . .87,88

33273-1 . . . . . . . . . .91

33273-2 . . . . . . . . . .91

33273L-2 . . . . . . . . .91

33275 . . . . . . . . . . . .91

33276 . . . . . . . . . . . .90

33276-P . . . . . . . . . .90

33276L-P . . . . . . . . .90

33277 . . . . . . . . . . . .89

33277-P . . . . . . . . . .89

33280 . . . . . . . . .87,88

42015 . . . . . . . . . . . .71

42070 . . . . . . . . . . . .98

42071 . . . . . . . . . . . .98

42075 . . . . . . . . . . .100

43002 . . . . . . . . .58,65

43002-25L . . . . . . . .58

43002-30A . . . . . . . .65

43002-30L . . . . . . . .58

43002-40L . . . . . . . .58

43002-50A . . . . . . . .65

43002-50L . . . . . . . .58

43003 . . . . . . . . .58,65

43003-25L . . . . . . . .58

43003-30A . . . . . . . .65

43003-50A . . . . . . . .65

43102 . . . . . . . . . . . .62

43102-30G . . . . . . . .62

43102-50G . . . . . . . .62

43103 . . . . . . . . . . . .62

43103-30G . . . . . . . .62

43103-50G . . . . . . . .62

43104 . . . . . . . . . . . .62

43104-25G . . . . . . . .62

44002 . . . . . . . . .59,66

44002-25L . . . . . . . .59

112

800.894.3572

44002-30A . . . . . . . .66

44002-30L . . . . . . . .59

44002-40L . . . . . . . .59

44002-50A . . . . . . . .66

44002-50L . . . . . . . .59

44100 . . . . . . . . . . . .63

44102 . . . . . . . . . . . .63

44102-30G . . . . . . . .63

44102-50G . . . . . . . .63

44103-30G . . . . . . . .63

44103-50G . . . . . . . .63

46000 . . . . . . . . . . . .61

46200 . . . . . . . . .61,67

46200-50A . . . . . . . .67

46200-50L . . . . . . . .61

46200-75A . . . . . . . .67

46200-75L . . . . . . . .61

46201 . . . . . . . . . . . .64

46201-50G . . . . . . . .64

46201-75G . . . . . . . .64

46202-50G . . . . . . . .64

46202-75G . . . . . . . .64

46500 . . . . . . . . .61,68

46501-50L . . . . . . . .61

46502-40L . . . . . . . .61

46504-25D . . . . . . . .68

46504-50D . . . . . . . .68

46505-25D . . . . . . . .68

46505-40D . . . . . . . .68

47400 . . . . . . . . . . . .67

47400-30 . . . . . . . . .67

47400-50 . . . . . . . . .67

47500 . . . . . . . . . . . .67

47501-75 . . . . . . . . .67

47502-50 . . . . . . . . .67

47502-75 . . . . . . . . .67

49007 . . . . . . . . . . . .72

49008 . . . . . . . . . . . .72

49009 . . . . . . . . . . . .72

49010 . . . . . . . . . . . .72

49011 . . . . . . . . . . . .72

50002 . . . . . . . . .94,95

50003 . . . . . . . . .94,95

50004 . . . . . . . . .94,95

500100 . . . . . . . . . . .83

500100F . . . . . . . . . .83

500101 . . . . . . . . . . .83

500101F . . . . . . . . . .83

500102 . . . . . . . . . . .83

500103 . . . . . . . . . . .84

500103F . . . . . . . . . .84

500107 . . . . . . . . . . .85

500108 . . . . . . . . . . .85

500109 . . . . . . . . . . .86

500109-100 . . . . . . .86

500110 . . . . . . . . . . .86

500110-100 . . . . . . .86

500111 . . . . . . . . . . .86

500111-100 . . . . . . .86

500113 . . . . . . . . . . .86

500113-100 . . . . . . .86

500114 . . . . . . . . . . .86

500114-100 . . . . . . .86

500115 . . . . . . . . . . .86

500115-100 . . . . . . .86

500119 . . . . . . . . . . .84

500123 . . . . . . . . . . .85

500126 . . . . . . . . . . .85

500128 . . . . . . . . . . .83

500128F . . . . . . . . . .83

NUMERIC INDEX

500129 . . . . . . . . . . .83

500129F . . . . . . . . . .83

500130 . . . . . . . . . . .85

500131 . . . . . . . . . . .85

500132 . . . . . . . . . . .85

500133 . . . . . . . . . . .85

500134 . . . . . . . . . . .86

500134-100 . . . . . . .86

500135 . . . . . . . . . . .86

500135-100 . . . . . . .86

500137 . . . . . . . . . . .85

500138 . . . . . . . . . . .85

500139 . . . . . . . . . . .85

500141F . . . . . . . . . .84

500141R . . . . . . . . . .84

500143 . . . . . . . . . . .84

500145 . . . . . . . . . . .85

500146 . . . . . . . . . . .85

500154 . . . . . . . . . . .86

500154-100 . . . . . . .86

500155 . . . . . . . . . . .86

500155-100 . . . . . . .86

500156 . . . . . . . . . . .86

500156-100 . . . . . . .86

500157 . . . . . . . . . . .86

500158 . . . . . . . . . . .86

500159 . . . . . . . . . . .86

500160 . . . . . . . . . . .86

500161 . . . . . . . . . . .86

500162 . . . . . . . . . . .86

500163 . . . . . . . . . . .86

500163-100 . . . . . . .86

500164 . . . . . . . . . . .86

500164-100 . . . . . . .86

500165 . . . . . . . . . . .86

500165-100 . . . . . . .86

500166 . . . . . . . . . . .86

500166-100 . . . . . . .86

500167 . . . . . . . . . . .86

500167-100 . . . . . . .86

500168 . . . . . . . . . . .86

500168-100 . . . . . . .86

500177 . . . . . . . . . . .84

50163 . . . . . . . . .94,95

50181 . . . . . . . . .94,95

51003C . . . . . . . . . . .26

51004C . . . . . . . . . . .26

51009C . . . . . . . . . . .26

51009C-S1 . . . . . . . .29

51009C-S2 . . . . . . . .29

530020 . . . . . . . . . . .49

530021 . . . . . . . . . . .49

530100 . . . . . . . . . . .41

530101 . . . . . . . . . . .41

530102 . . . . . . . . . . .41

530107 . . . . . . . . . . .41

530107-BA . . . . . . . .41

530107-HM . . . . . . .41

530107-RH . . . . . . . .41

530109 . . . . . . . . . . .41

530109-BA . . . . . . . .41

530109-HM . . . . . . .41

530109-RH . . . . . . . .41

530113 . . . . . . . . . . .41

530115 . . . . . . . . . . .46

530116 . . . . . . . . . . .46

530124-FA . . . . . . . .46

530124-FM . . . . . . . .46

530124-FMH . . . . . . .46

530124-HM . . . . . . .46

530124-HMH . . . . . .46

530124-RA . . . . . . . .46

530124-RM . . . . . . .46

530124-RMH . . . . . .46

530125S-FA . . . . . . .44

530125S-FM . . . . . . .44

530125S-FMH . . . . .44

530125S-HM . . . . . .44

530125S-HMH . . . . .44

530125S-RA . . . . . . .44

530125S-RM . . . . . .44

530125S-RMH . . . . .44

540025 . . . . . . . . . . .25

540035 . . . . . . . . . . .25

540036 . . . . . . . . . . .25

540037 . . . . . . . . . . .25

540038 . . . . . . . . . . .25

540039 . . . . . . . . . . .25

540043 . . . . . . . . . . .25

540044 . . . . . . . . . . .25

540045 . . . . . . . . . . .25

540046 . . . . . . . . . . .25

540050 . . . . . . . . . . .25

540060 . . . . . . . . . . .25

540100-G . . . . . . . . .53

540103 . . . . . . . . . . .53

540104-G . . . . . . . . .53

540111 . . . . . . . . . . .53

540112-G . . . . . . . . .53

540115-G . . . . . . . . .53

540200-G . . . . . . . . .53

540201-G . . . . . . . . .53

540202 . . . . . . . . . . .53

540203-G . . . . . . . . .53

540204-G . . . . . . . . .53

540205 . . . . . . . . . . .53

540207-G . . . . . . . . .53

540208 . . . . . . . . . . .53

540235 . . . . . . . . . . .53

540300 . . . . . . . . . . .53

540301 . . . . . . . . . . .53

540302 . . . . . . . . . . .53

540303 . . . . . . . . . . .53

560000 . . . . . . .33,110

560001 . . . . . . . . . .111

560003 . . . . . . .33,110

560006 . . . . . . . . . . .34

560006J . . . . . . . . . .34

560008 . . . . . . .34,110

560008V . . . . . . . . . .34

560012 . . . . . . . . . .108

560014 . . . . . . . . . .109

560015 . . . . . . . . . .110

560019 . . . . . . . . . . .34

560022 . . . . . . . . . .110

560024 . . . . . . . . . .109

560026 . . . . . . . . . .109

560027 . . . . . . . . . .109

560028 . . . . . . .33,110

560034 . . . . . . . . . .111

560034-CMK . . . . .111

560034-V1 . . . . . . .111

560042 . . . . . . . . . .109

560043 . . . . . . . . . .110

560045 . . . . . . . . . .108

560048 . . . . . . . . . .111

560050 . . . . . . . . . .111

560051 . . . . . . . . . .111

560052 . . . . . . . . . .111

560060 . . . . . . . . . .110

560062 . . . . . . . . . .108

560064 . . . . . . . . . .110

560066 . . . . . . . . . .107

560066A . . . . . . . . .107

560072 . . . . . . . . . .107

560072A . . . . . . . . .107

560080 . . . . . . . . . . .14

560081 . . . . . . . . . . .14

560082 . . . . . . . . . . .14

560083 . . . . . . . .12,13

560084 . . . . . . . .12,13

560085 . . . . . . . .12,13

560086 . . . . . . . .12,13

560101 . . . . . . . . . . .34

560203 . . . . . . . . . .106

560204 . . . . . . . . . .106

560205 . . . . . . . . . .106

62101-35 . . . . . . . . .22

62101-70 . . . . . . . . .22

62101-120 . . . . . . . .22

62101-180 . . . . . . . .22

62101-240 . . . . . . . .22

62102-35 . . . . . . . . .22

62102-70 . . . . . . . . .22

62102-120 . . . . . . . .22

62102-180 . . . . . . . .22

62102-240 . . . . . . . .22

70002 . . . . . . . . .94,95

70003 . . . . . . . . .94,95

70004 . . . . . . . . .94,95

70005 . . . . . . . . .94,95

70019 . . . . . . . . .94,95

70061 . . . . . . . . .94,95

70062 . . . . . . . . .94,95

70063 . . . . . . . . .94,95

70064 . . . . . . . . .94,95

70067 . . . . . . . . .94,95

70068 . . . . . . . . .94,95

710100 . . . . . . . . . . .93

710101 . . . . . . . . . . .93

710102 . . . . . . . . . . .93

710108 . . . . . . . . . . .93

710109 . . . . . . . . . . .93

710131 . . . . . . . . . . .93

710132 . . . . . . . . . . .93

710133 . . . . . . . . . . .93

710134 . . . . . . . . . . .93

71146 . . . . . . . . . . . .95

71150-03 . . . . . . . . .92

71150-05 . . . . . . . . .92

71150-10 . . . . . . . . .92

71150-20 . . . . . . . . .92

71160-03 . . . . . . . . .92

71160-05 . . . . . . . . .92

71160-10 . . . . . . . . .92

71160-20 . . . . . . . . .92

71246-03 . . . . . . . . .91

71246-05 . . . . . . . . .91

71246-10 . . . . . . . . .91

71246-10W . . . . . . . .91

71246-20 . . . . . . . . .91

71250-03 . . . . . . . . .92

71250-05 . . . . . . . . .92

71250-10 . . . . . . . . .92

71250-20 . . . . . . . . .92

71260-03 . . . . . . . . .92

71260-05 . . . . . . . . .92

71260-10 . . . . . . . . .92

71260-20 . . . . . . . . .92

71460-2 . . . . . . . . . .89

71460-4 . . . . . . . . . .89

71460-6 . . . . . . . . . .89

71460-8 . . . . . . . . . .89

72101 . . . . . . . . . . . .93

72102 . . . . . . . . . . . .93

72103 . . . . . . . . . . . .93

72110 . . . . . . . . . . . .93

72111 . . . . . . . . . . . .93

72112 . . . . . . . . . . . .93

810200 . . . . . . . . . . .54

810201 . . . . . . . . . . .54

810202 . . . . . . . . . . .54

810230-5 . . . . . . . . .56

810233 . . . . . . . . . . .54

810240 . . . . . . . . . . .56

810241 . . . . . . . . . . .56

810244 . . . . . . . . . . .56

810253 . . . . . . . . . . .56

810254 . . . . . . . . . . .56

810261 . . . . . . . . . . .56

810270 . . . . . . . . . . .56

810271 . . . . . . . . . . .56

810272 . . . . . . . . . . .56

81100-02 . . . . . . . . .69

81100-04 . . . . . . . . .69

81100-06 . . . . . . . . .69

81100-10 . . . . . . . . .69

81100-15 . . . . . . . . .69

81100-25 . . . . . . . . .69

81100-30 . . . . . . . . .69

81100-40 . . . . . . . . .69

81100-50 . . . . . . . . .69

81125-02 . . . . . . . . .69

81125-04 . . . . . . . . .69

81125-06 . . . . . . . . .69

81125-10 . . . . . . . . .69

81125-15 . . . . . . . . .69

81125-25 . . . . . . . . .69

81125-30 . . . . . . . . .69

81125-40 . . . . . . . . .69

81125-50 . . . . . . . . .69

81150-02 . . . . . . . . .69

81150-04 . . . . . . . . .69

81150-06 . . . . . . . . .69

81150-10 . . . . . . . . .69

81150-15 . . . . . . . . .69

81150-25 . . . . . . . . .69

81150-30 . . . . . . . . .69

81150-40 . . . . . . . . .69

81150-50 . . . . . . . . .69

81150-75 . . . . . . . . .69

81200-01A . . . . . . . .49

81200-02 . . . . . . . . .69

81200-04 . . . . . . . . .69

81200-05 . . . . . . . . .69

81200-06 . . . . . . . . .69

81200-08 . . . . . . . . .69

81200-12 . . . . . . . . .69

81200-15 . . . . . . . . .69

81200-20 . . . . . . . . .69

81200-25 . . . . . . . . .69

81200-30 . . . . . . . . .69

81200-35 . . . . . . . . .69

81200-40 . . . . . . . . .69

81200-45 . . . . . . . . .69

81200-50 . . . . . . . . .69

81200-75 . . . . . . . . .69

81200-100 . . . . . . . .69

81225-02 . . . . . . . . .69

81225-04 . . . . . . . . .69

www.liquidynamics.com

113

81225-06 . . . . . . . . .69

81225-25 . . . . . . . . .69

81225-30 . . . . . . . . .69

81225-40 . . . . . . . . .69

81225-50 . . . . . . . . .69

81230-02 . . . . . . . . .69

81230-04 . . . . . . . . .69

81230-06 . . . . . . . . .69

81230-25 . . . . . . . . .69

81230-30 . . . . . . . . .69

81230-35 . . . . . . . . .69

81230-40 . . . . . . . . .69

81230-50 . . . . . . . . .69

81230A . . . . . . . . . . .49

81231A . . . . . . . . . . .49

81250-02 . . . . . . . . .69

81250-04 . . . . . . . . .69

81250-06 . . . . . . . . .69

81250-12 . . . . . . . . .69

81250-20 . . . . . . . . .69

81250-25 . . . . . . . . .69

81250-30 . . . . . . . . .69

81250-40 . . . . . . . . .69

81250-50 . . . . . . . . .69

81260-02 . . . . . . . . .69

81260-04 . . . . . . . . .69

81260-06 . . . . . . . . .69

81260-12 . . . . . . . . .69

81260-20 . . . . . . . . .69

81260-25 . . . . . . . . .69

81260-30 . . . . . . . . .69

81260-40 . . . . . . . . .69

81260-50 . . . . . . . . .69

81281-15 . . . . . . . . .88

81291-10 . . . . . . . . .88

81300-02 . . . . . . . . .70

81300-04 . . . . . . . . .70

81300-05 . . . . . . . . .70

81300-06 . . . . . . . . .70

81300-08 . . . . . . . . .70

81300-12 . . . . . . . . .70

81300-15 . . . . . . . . .70

81300-20 . . . . . . . . .70

81300-25 . . . . . . . . .70

81300-30 . . . . . . . . .70

81300-40 . . . . . . . . .70

81300-50 . . . . . . . . .70

81301-25 . . . . . . . . .70

81301-30 . . . . . . . . .70

81301-40 . . . . . . . . .70

81301-50 . . . . . . . . .70

81301-60 . . . . . . . . .70

81315-02 . . . . . . . . .70

81315-04 . . . . . . . . .70

81315-06 . . . . . . . . .70

81315-12 . . . . . . . . .70

81315-20 . . . . . . . . .70

81315-25 . . . . . . . . .70

81315-30 . . . . . . . . .70

81315-40 . . . . . . . . .70

81315-50 . . . . . . . . .70

81315-60 . . . . . . . . .70

81316-25 . . . . . . . . .70

81316-30 . . . . . . . . .70

81316-40 . . . . . . . . .70

81316-50 . . . . . . . . .70

81317-06 . . . . . . . . .70

81317-12 . . . . . . . . .70

81317-20 . . . . . . . . .70

81317-50 . . . . . . . . .70

NUMERIC INDEX

81318-06 . . . . . . . . .70

81318-12 . . . . . . . . .70

81318-20 . . . . . . . . .70

82400-06 . . . . . . . . .70

82400-10A . . . . . . . .70

82400-12 . . . . . . . . .70

82400-12A . . . . . . . .70

82400-20A . . . . . . . .70

82400-25 . . . . . . . . .70

82400-30 . . . . . . . . .70

82400-35 . . . . . . . . .70

82400-40 . . . . . . . . .70

82400-50 . . . . . . . . .70

82410-06 . . . . . . . . .70

82410-10 . . . . . . . . .70

82410-10A . . . . . . . .70

82410-12A . . . . . . . .70

82410-25 . . . . . . . . .70

82410-25A . . . . . . . .70

82410-30 . . . . . . . . .70

82410-35 . . . . . . . . .70

82410-40 . . . . . . . . .70

82410-50 . . . . . . . . .70

82450-08 . . . . . . . . .70

82450-10 . . . . . . . . .70

82450-12 . . . . . . . . .70

82450-15 . . . . . . . . .70

82450-20 . . . . . . . . .70

82460-08 . . . . . . . . .70

82460-10 . . . . . . . . .70

82460-12 . . . . . . . . .70

82460-15 . . . . . . . . .70

82460-20 . . . . . . . . .70

830151D . . . . . . . . .105

830153D . . . . . . . . .105

830160D . . . . . . . . .105

830161D . . . . . . . . .105

830162D . . . . . . . . .105

830163D . . . . . . . . .105

830164 . . . . . . . . . .105

88000 . . . . . . . . . . . .68

88402 . . . . . . . . .60,68

88402-40D . . . . . . . .68

88402-40L . . . . . . . .60

88402-50D . . . . . . . .68

88402-50L . . . . . . . .60

88403 . . . . . . . . .60,66

88403-50A . . . . . . . .66

88403-50L . . . . . . . .60

88403-75A . . . . . . . .66

88403-75L . . . . . . . .60

88405 . . . . . . . . .60,68

88405-30D . . . . . . . .68

88405-30L . . . . . . . .60

88405-40D . . . . . . . .68

88405-40L . . . . . . . .60

900199 . . . . . . . . . .103

900210 . . . . . . . . . .103

900212 . . . . . . . . . .102

900223 . . . . . . . . . . .55

900226 . . . . . . . . . . .54

900227 . . . . . . . . . . .54

900228 . . . . . . . . . . .54

900229 . . . . . . . . . . .54

900230 . . . . . . . . . . .54

900231 . . . . . . . . . . .55

900232 . . . . . . . . . . .55

900234 . . . . . . . . . . .54

900235 . . . . . . . . . .103

900236 . . . . . . . . . . .19

900245 . . . . . . . . . . .49

900247 . . . . . . . . . . .49

900253 . . . . . . . . . . .48

900256 . . . . . . . . . . .52

900257 . . . . . . . . . . .52

900262 . . . . . . . . . . .55

900265 . . . . . . . . . . .55

900266 . . . . . . . . . . .49

900266-BSP . . . . . . .49

900267 . . . . . . . . . . .85

900268 . . . . . . . . . . .49

900268-BSP . . . . . . .49

900270 . . . . . . . . . . .49

900270-BSP . . . . . . .49

900283 . . . . . . . . . . .52

900284 . . . . . . . . . . .55

900285 . . . . . . . . . . .55

900286 . . . . . . . . . . .55

900287 . . . . . . . . . . .55

900288 . . . . . . . . . . .55

900289-S . . . . . . . . .19

900290 . . . . . . . .11,98

900291 . . . . . . . .11,98

900292 . . . . . . . .11,98

900293 . . . . . . . .11,98

900294 . . . . . . . .11,98

900295 . . . . . . . .11,98

900297 . . . . . . . . . . .48

900298 . . . . . . . . . . .81

900298-A . . . . . . . . .81

900298-A-EZ . . . . . .81

900298-EZ . . . . . . . .81

900298M-A-EZ . . . . .81

900298M-EZ . . . . . . .81

900299 . . . . . . . . . . .55

900313 . . . . . . . . . . .55

900314 . . . . . . . . . . .55

900323 . . . . . . . . . . .55

900324 . . . . . . . . . . .55

900325 . . . . . . . . . . .11

900327 . . . . . . . . . . .55

900328 . . . . . . . . . . .55

900342 . . . . . . . . . . .55

900348 . . . . . . . . . . .19

900349 . . . . . . . . . . .19

900351 . . . . . . . . . . .11

900352 . . . . . . . . . . .19

900360 . . . . . . . . . . .55

900361 . . . . . . . . . . .55

900365 . . . . . . . . . . .55

900365-B . . . . . . . . . .8

900366 . . . . . . . . . . .55

900367 . . . . . . . . . . .55

900371 . . . . . . . . . . .55

900372 . . . . . . . . . . .54

900375 . . . . . . . . . . .55

900376 . . . . . . . . . . .55

900377 . . . . . . . . . . .55

900382 . . . . . . . . . . .55

900383 . . . . . . . . . . .55

900384 . . . . . . . . . . .55

900385 . . . . . . . . . . .55

900386 . . . . . . . . . . .55

900387 . . . . . . . . . . .55

900388 . . . . . . . . . . .55

900389 . . . . . . . . . . .55

900390 . . . . . . . . . . .55

900391 . . . . . . . . . . .55

900392 . . . . . . . . . . .55

900393 . . . . . . . . . . .55

900394 . . . . . . . . . . .55

900396 . . . . . . . . . . .55

900397 . . . . . . . . . . .55

900398 . . . . . . . . . . .55

900399 . . . . . . . . . . .55

900401 . . . . . . . . . . .55

900402 . . . . . . . . . . .55

900403 . . . . . . . . . . .55

900404 . . . . . . . . . . .55

900405 . . . . . . . . . . .55

900406 . . . . . . . . . . .55

900417 . . . . . . . . . . .55

900510 . . . . . . . . . . .55

900521 . . . . . . . . . . .21

900524 . . . . . . . . . . .21

900787 . . . . . . . . . . .55

901002 . . . . . . . . . . .26

901005 . . . . . . . . . . .26

901006 . . . . . . . . . . .26

901019A-XX . . . . . . . .8

901020A-XX . . . . . . . .8

901020A-XXA . . . . . . .8

901021A-XX . . . . . . . .8

901036 . . . . . . . . . . .55

901053 . . . . . . . . . . .52

901054 . . . . . . . . . . .52

901055 . . . . . . . . . . .52

901056 . . . . . . . . . . .52

901057 . . . . . . . . . . .52

901058 . . . . . . . . . . .52

901058-38 . . . . . . . .52

901060 . . . . . . . . . . .51

901060-CH . . . .51,100

901060V . . . . . . . . . .51

901061 . . . . . . . . . . .51

901062 . . . . . . . . . . .51

901063 . . . . . . . . . . .51

901064 . . . . . . . . . . .51

901068-UL . . . . . . . .51

901071 . . . . . . . . . . .19

901075 . . . . . . . . . . .51

901076 . . . . . . . . . . .51

901090T-35 . . . . . . .21

901090T-70 . . . . . . .21

901090T-120 . . . . . .21

901090T-180 . . . . . .21

901090T-240 . . . . . .21

901096T-A . . . . . . . .21

901096T-C . . . . . . . .21

901097T . . . . . . . . . .21

901098T-A . . . . . . . .21

901098T-B . . . . . . . .21

901111 . . . . . . . . . . .92

901946 . . . . . . . . . . .52

901948 . . . . . . . . . . .52

902010 . . . . . . . . . . .71

902011 . . . . . . . . . . .71

902012 . . . . . . . . . . .71

902013 . . . . . . . . . . .71

902014 . . . . . . . . . . .71

902015 . . . . . . . . . . .71

902016 . . . . . . . . . . .71

902017 . . . . . . . . . . .71

902018 . . . . . . . . . . .71

902019 . . . . . . . . . . .71

902020 . . . . . . . . . . .71

904001 . . . . . . . . . . .52

904002 . . . . . . . . . . .52

904003 . . . . . . . . . . .52

904005 . . . . . . . . . . .32

940200-G . . . . . . . . .53

950002 . . . . . . . . .7,25

950003 . . . . . . . . . . .11

950004 . . . . . . . . . . .98

950006 . . . . . . . . . . .26

950007 . . . . . . . . . . .26

950008 . . . . . . . . . . .26

950009 . . . . . . . . . . .27

950010 . . . . . . . . . . .56

950012 . . . . . . . . . . .26

950013 . . . . . . . . . . .21

950017 . . . . . . . . . . .97

950019 . . . . . . . . . . .11

950020 . . . . . . . . . . .11

950022-16 . . . . . . . .11

950022-55 . . . . . . . .11

950022-275 . . . . . . .11

950026 . . . . . . . . . . .19

950027-275 . . . .11,100

950027-55 . . . . .11,100

950041 . . . . . . . . . . .71

950042 . . . . . . . . . . .71

950043 . . . . . . . . . . .71

950047 . . . . . . . . .7,25

950049 . . . . . . . . . . .11

950050 . . . . . . . . . .103

950051 . . . . . . . . . . .11

950054 . . . . . . . . . .103

950060 . . . . . . . . . . .27

950064 . . . . . . . . . . . .8

950065 . . . . . . . . . . . .8

950066 . . . . . . . . . . .27

950068 . . . . . . . . . . .27

950071-05 . . . . . . . .27

950071-16 . . . . . . . .27

950071-30 . . . . . . . .27

950071-55 . . . . . . . .27

950073 . . . . . . . . . . .27

950084 . . . . . . . . . . .88

950091 . . . . . . . . . . .71

950092 . . . . . . . . . . .98

950093 . . . . . . . . . . .98

950100 . . . . . . . . . . .97

950101 . . . . . . . . . . .97

950102 . . . . . . . . . . .97

950103 . . . . . . . . . . .97

950111 . . . . . . . . . . .24

950112 . . . . . . . . . . .24

981001P . . . . . . . . . .32

981001R . . . . . . . . . .32

S3331 . . . . . . . . . . .102

S3344 . . . . . . . . . . .102

Grease System

Selection Guide . .79

IBC Oil Tank Sys.

Selection Guide . . .20

Mobil Cart System

Selection Guide . .31

Oil Reel System

Selection Guide . . .16

Poly-Tank System

Selection Guide . .23

Tank System

Selection Guide . .18

114

800.894.3572

GENERAL REFERENCE DATA

The following viscosity information is provided as a general guide to help you determine which pump would be most suitable for your application. It is also helpful in determining consequences of changes in temperature and how it will affect system performance.

Please contact Liquidynamics if you need help in choosing equipment for your specific application and environment.

Technical information provided in the plumbing chart is a composite of generally available industry information and is meant to be used a guide only. For specific information pertaining to your installation please contact your plumbing supplier.

TUBING

SIZE

5/8”

3/4”

1”

5/8”

3/4”

1”

1/2”

3/4”

1”

1

1

4

1 1 ⁄

2

1/2”

3/4”

1”

1

1

4

1 1 ⁄

2

WALL

0.035

0.035

0.049

0.083

0.095

0.120

0.109

0.113

0.133

0.140

0.145

0.040

0.045

0.050

0.055

0.060

O.D.

I.D.

L OW ES SU

0.555

0.680

AREA

E S

0.242

0.363

TE L T

WORKING

PRESSURE

UB

WEIGHT

PER FT.

0.625

0.750

2500

2100

0.221

0.267

1.000

0.902

0.639

2200

Tubing conforming to SAE J525 and J536 specifications

0.498

0.625

0.750

1.000

HIIG H P SS UR E S TE TU BIIN

0.459

0.166

8100

0.560

0.760

0.246

0.454

7700

7250

Tubing conforming to SAE J525 and J536 specifications

L OW PR ES UR E S CH UL E 4 0 S TE PIIP E

0.480

0.665

1.130

0.840

1.050

1.315

1.660

1.900

0.620

0.824

1.049

1.380

0.304

0.533

0.864

1.496

640

560

490

440

L OW

1.610

PR ES UR

2.036

E T YP E “ L” OP ER

420

UB G

0.850

1.130

1.678

2.272

2.717

0.625

0.875

1.125

1.625

0.660

0.900

1.140

0.342

0.636

1.020

613

495

420

373

L OW

1.380

1.495

PR ES UR E T YP “M ” C PP

347

R T BIIN

0.285

0.455

0.655

0.884

1.140

GALLONS

PER FT.

0.0126

0.0188

0.0332

0.0086

0.0128

0.0236

0.00158

0.0277

0.0449

0.0777

0.1058

TUBING

SUPPORT

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

1/2”

3/4”

1”

1

1

4

1 1 ⁄

2

0.028

0.032

0.035

0.042

0.049

0.875

1.125

1.375

1.625

0.686

0.930

1.166

1.527

0.369

0.679

1.067

1.831

346

286

287

282

0.328

0.465

0.682

0.940

8 ft. O.C.

8 ft. O.C.

8 ft. O.C.

TEMPERATURE

Fluid

A.T.F

5w-20

10 w

5w-30

Hydraulic

10w-30

20w

30w

10w-40

15w-40

40w

20w-50

80w-90

50w

80w-140

90w gear

140w gear

#2 grease

Peanut Butter

ISO No.

32

46

68

100

150

220

320

460

100 F

70

68

100

97

123

128

164

143

38 C

35

46

37

61

46

226

263

331

479

90 F

91

92

135

126

164

178

222

198

32 C

44

59

49

78

61

321

359

479

702

70 F

165

181

267

228

311

370

440

412

21 C

72

101

87

134

114

709

720

1099

1658

60,000

250,000

80 F

121

127

187

168

223

253

308

282

27 C

56

76

64

101

82

470

502

713

1060

50 F

331

405

596

454

656

887

976

975

10 C

127

188

176

252

241

1807

1615

2926

4557

60 F

230

266

392

317

445

562

645

622

15 C

95

136

122

182

163

1110

1062

1757

2693

40 F 30 F 20 F 10 F 0 F

491

640

940

669

998

1457

1530

1591

4 C

176

268

263

359

370

-1 C

250

394

407

528

592

755

1059

1547

1017

1575

2510

2494

2717

-7 C

366

598

659

801

995

1205

1843

2670

1605

2585

4555

4243

4880

-12 C

544

944

1120

1262

1763

2010

3392

4854

2635

4437

8765

7575

9275

-18 C

872

1557

2012

2070

3319

3517

6651

9364

4523

7999

18015

14266

18770

3074

2542

5491 10358 20769 44595

4152 7068 12596 23621

5099 9346 18121 37417 82894

8077 15065 29745 62574 141305

Numbers shown are absolute viscosity in centipoise (In this case; centipoise = centistokes x 0.9)

Grease is a thixotropic fluid: a fluid with viscosity that decreases as shear rate or agitation increases www.liquidynamics.com

115

2211 S. Edwards

Wichita, KS 67213

Toll Free: 800-894-3572

Phone: 316-943-5477

Fax: 316-943-4760 www.liquidynamics.com

E-mail: [email protected]

5/08

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement