forklifts - Access Solutions

forklifts - Access Solutions
FORKLIFTS
AUSTRALIA
2.5 - 3.5 TONNE ROUGH TERRAIN FORKLITS SPECIFICATIONS
LOAD CHART
GENERAL SPECIFICATIONS
Model
Power Type
Rated Capacity (kg)
Load Centre (mm)
FDT25T-CW3
FDT35T-CW3
Diesel
2500
3500
500
CHARACTERISTICS AND DIMENSIONS
Lift Height (mm)
Free Lift Height (mm)
Fork Size LxWxT (mm)
Fork Regulating Range Min./Max.
Mast Tilt Angle F/R (Deg)
Front Overhang (mm)
Rear Overhang (mm)
Min. Ground Clearance (mm)
Length to Face of Fork (without Fork) (mm)
Overall Width
Mast Lowered Height (mm)
Mast Extended Height (with Backrest) (mm)
Overhead Guard Height (mm)
Turning Radius (outside) (mm)
Min. Right Angle Stacking Aisle Width
(add Load Length and Clearance) (mm)
3000
160
165
1100x122x40
1220x122x40
250/1160
10°/12°
586
601
520
270
2946
2956
1557.5
1600.5
2265
2330
4175
4305
2256.5
2276
2783
4795
4805
PERFORMANCE
Travel (Unladen/Laden) (km/h)
Lifting (Unladen/Laden) (mm/s)
Lowering (Unladen/Laden) (mm/s)
Max. Drawbar Pull (Laden/Unladen) (KN)
Max. Gradeability (Loaden) (%)
20/18
600/570
420/445
22/22
480/450
400/500
17000
20
16
TYRE
2500kg
TRIPLEX 3.7m,
4.0m
1500
TRIPLEX 4.5m
DUPLEX 4.5m
1000
DUPLEX 2.7m,
3.0m, 3.3m,
3.5m, 3.7m,
3000
Load Capacity
2000
TRIPLEX 3.7m,
4.0m
2500
DUPLEX 4.5m
2000
TRIPLEX 4.35m
1500
TRIPLEX 4.7m
Unladen Weight
Distribution (kg)
Front Axle
Rear Axle
Front Axle
Rear Axle
4465
5990
975
1785
2680
5180
7725
955
2070
3110
POWER AND TRANSMISSION
Battery Voltage/Capacity (V/Ah)
Model
Manufacture
Rated Output/r.p.m (kW)
Rated Torque/r.p.m (N.m)
Engine
No. of Cylinders
BorexStroke (mm)
Displacement (L)
Fuel Tank Capacity (L)
Manufacture
Type
Stage (F/R)
Operating Pressure (For Attachments) (Mpa)
Min. Right Angle Stacking Aisle Width (mm)
12/90
12/90
4TNE98-BQFLC
YANMAR
42.1/2300
186-206/1700
4
98x110
3.318
55
China
YQXD30-XH
YQXD40MKS-XH
1/1
20
2615
Specifications and characteristics are subject to change without notice.
2.5 T Load Curve
900
1000
1100mm
700
600
WEIGHT
Self Weight (kg)
Laden Weight
Distribution (kg)
800
500
500
900
1000
1000
1100mm
700
800
TRIPLEX 4.7m
600
500
3500kg
DUPLEX 2.7m,
3.0m, 3.3m,
3.5m, 3.7m,
4.0m
500
12-16.5-14PR
14-17.5-14PR
27x10-12-12PR
27x10-12-12PR
1205.5
1205
680
680
650
650
1010
1880
Load Capacity
Front Tyre
Rear Tyre
Front Tread (mm)
Rear Tread (mm)
Front Tyre Pressure (bar)
Rear Tyre Pressure (bar)
Seat to Ceiling inside Height (mm)
Wheelbase (mm)
3.5 T Load Weight Curve
MAST OPTIONS
Duplex
3.3m
3.5m
3.7m
4.0m
4.5m
FFL Triplex
3.7m
4.0m
4.7m
Global Power Services LLC retains the right to interpret.
FORKLIFTS
AUSTRALIA
STANDARD FEATURES
TWO-WHEEL DRIVE SYSTEM
Forklifts Australia Rough Terrain Forklift is a tough, compact forklift with a two-wheel drive system. The forklift is based on a conventional forklift, but
built for rough terrain performance.
ENGINE
FLOATING SYSTEM
Forklifts Australia’s 2.5T and 3.5T Rough
Terrain Forklifts adopt Yanmar 4TNE98(EUIII)
diesel engine. It is world renowned for superior
performance, economy and longetivity. Timed
glow plug cold start in cold climeates allows
faster warm up and fuel savings. Yanmar
engine conforms to all world environmental EPA
standards.
Forklifts Australia’s Rough Terrain Forklifts
adopt a floating R.O.P system. Engineers have
adapted the latest ergonomics for operator
convenience. A superior full floating operator
cabin is installed with rubber damping instead of
the traditional rigid design. This greatly reduces
machine vibration and offers a smoother ride
over rough terrain and reduces operator fatigue.
Travel and hydraulic controls are positioned
forward for most ergonomic natural operation.
The fully adjustable tilt steering wheel and fully
suspension seat with seat belt accomodate all
size operators.
TRANSMISSION WITH
DIFFERENTIAL LOCK
MAST: WIDE VIEW AND DURABLE
The power shift transmission with torque
converter features two inching pedals, brake
control and full reversal allowing faster cycle
times. The differential is specifically designed for
rough terrain and features automatic differential
lock providing ultimate traction during inclement
weather conditions and rough operating surfaces.
STEER AXLE
The oscillating steel axle allows either wheel to
step over obstacles keeping the machine and
load level. Floatation drive and steer tyres provide
excellent traction and stability. The steering angle
is from 54° to 78° with very small turning radius.
The 2.5T Rough Terrain Forklift’s mast width is
1557.5mm. The 3.5T Rough Terrain Forklift’s
mast width is 1600.5mm. Maximum mast tilt
angle F/R reaches to 10°/12°. The wide view
mast provides excellent through-the-mast
visibility improving the work efficiency and
allowing safe operation of the forklift. Beam rails
and heavy tie bar construction reduce twisting
while handling long, lateral loads on rough
surface applications. Sealed bearing load rollers
and are externally adjustable to compensate
for long term wear. Side thrust rollers on top
and bottom of all rails and carriage side thrust
rollers reduce mast roller maintenance and
replacements. A clear view to the forks and
surrounding area is optimised through the
wide view mast. Excellent rearwards visibility is
enhanced with the sloping rear counterweight
and fenders. The dash and LED monitor panel
is mounted low and in line of sight for operator
convenience.
APPEARANCE: MODERN DESIGN
Forklifts Australia’s Rough Terrain Forklift design
has adopted a clear and concise appearance
with a modern design.
Specifications and characteristics are subject to change without notice.
Global Power Services LLC retains the right to interpret.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement