door and gate operators
D O O R A N D G AT E O P E R AT O R S
T h e C a t a l o g u e | 2 017
M A D E I N I T A LY
Excellence is the constant
striving towards perfection.
MOVING LIFE
A company constantly on the move, celebrating 30 years
of history and always looking forward to the future: for
two generations, innovation and research have been
the DNA of TAU. Each TAU product is the result of the
application of the newest technologies to a very simple
idea: make everyday life a little easier. While browsing
through our website, you will discover a wide range of
sliding and swing gate operators, garage door openers,
traffic barriers, automatic doors, parking guards, tubular
motors, rolling shutter motors and window openers.
MADE IN ITALY
EMOTIONAL DESIGN
Italian style at its best: a perfect blend
of emotional design, rational appeal,
technology and attention to details.
INSTALLING COMFORT
Enjoy enhanced comfort and security
by installing TAU Gate Operators in
your home.
SAFETY FIRST
Look for the products with the green EN 12445-12453 icon in
the catalogue. The EN logo indicates that the gate operator
has been tested in accordance with EN 12445-23453 (Safety
in use of power operated doors). The use of products with the
green EN 12445-12453 icon simplifies the task of issuing the EC
Declaration of Conformity.
FOR A
SAFER HOME
Technology must be safe, clean and easy for people
to use. TAU products have been designed to enhance
Customer satisfaction. Tranquillity of use is guaranteed
by the sophisticated prevention systems installed in all
products and tested for years at our laboratories. The
experience of our technicians and constant testing in the
most extreme conditions form the bases for making our
systems ideal for integration in all situations. Rigorous
product testing and design are the guarantee of safety
for everyday use. These inspections and checks are
applied to the mechanical construction of parts through
to the production process. In fact TAU also means
quality of work and attention to the human resources
employed for business development.
NEWS
New family of controllers “DIAMOND”
TAU unveils the new family of controllers “DIAMOND”.
Based on the innovative technology “ADAPTA”, the new family of electronic control units provides
superior performances and capabilities to a wide range of TAU DC Gate Operators and Barriers.
Among the functional highlights are:
Technology “Adapta”: the microprocessor acquires and monitors the
data from the gate operator and, in case of changes due to seasonal
climate conditions or to the wear and tear of the operator is capable to
make adaptive decisions and adjust the working parameters in real time
Solar-Friendly Technology: the electronic control boards of the “DIAMOND”
family have been developed to minimize power consumption during standby times in order to increase battery life and optimize solar performances
Technology Made Easy: the technology of the electronic control boards
of the “DIAMOND” family is designed with simplicity in mind: easy to
install, user-friendly interface, easy to operate. Its innovative one-touch
system makes programming the easiest task.
Advanced Users: thanks to the TAUPROG handheld device, a wide range
of operating parameters can be adjusted to fit individual requirement.
State of the art: the new family of controllers “DIAMOND” come packed
with useful functions such as on-board battery charger, 2-channel radio
receiver, soft-start, soft-stop, intelligent obstacle detection, vehicle and
pedestrian opening, adjustable auto close, diagnostic center, digital limit
switches and much more.
Preview
News on Tau's Products
T-ONE10B DC sliding gate operator with encoder, complete with electronic control unit
and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 1000 kg.
Page 14
MASTER-R fast DC sliding gate operator with
encoder, complete with electronic control unit
and built-in 433,92 MHz rolling code radio receiver. Speed up to 24 m/min. Maximum gate
weight 1200 kg.
Page 18
T-ONE8BR DC sliding gate operator with encoder, complete with electronic control unit
and built-in 433,92 MHz rolling code radio receiver. Speed up to 24 m/min. Maximum gate
weight 800 kg.
Page 14
ARM3000 Electromechanical covered screw
gate operator. Maximum leaf 4 m. Available in
low voltage with encoder and 230 V.
Pages 28 and 30
BIUNO Operator for folding doors max 1,2 m,
available in low voltage and 230 V.
Pages 64 and 66
INDY Side mounted operator for rolling shutters
and industrial sectional doors with rotating shaft
and manual emergency chain operations.
Pages 68
Preview
News on Tau's Products
RBLO-L DC automatic barrier, painted steel cabinet, for booms up to 6 m, complete with built-in
electronic control board, radio receiver and battery charger.
Page 88
RBLO-LX DC automatic barrier, painted steel
cabinet, for elliptical booms up to 5 m, complete
with built-in electronic control board, radio receiver and battery charger.
Page 90
LUXSFA and XSFA The special joint of the boom
with break out system allows to release and rotate the boom in case of crush, thus following the
movement of a vehicle that breaks the barrier
down. Available for LUXE and RBLO-X barriers.
Pages 87 and 93.
ABTSE and XABTSE The joint for folding elliptical bar completes the range of accessories for the LUXE and RBLO-X barriers. The application of the joint allows
managing low ceiling passage up to 5 m wide.
Pages 87 and 93.
PARKXL e PARKMXL Park space saver plus,
available in automatic and manual version.
Page 95
BSD Safety edge kit with mechanical contact.
Without any rigid parts and thanks to a special
internal mechanism, sensitive edges deform
all along their length, guaranteeing always
maximum safety for both people and vehicles.
Page 120
Table
of content
SLIDING GATES
SWING GATES
T-OnePage 12
MasterPage 18
Big Page 22
ArmPage 28
R18 - R18benc Page 36
R30 - R40
Page 40
Easy
Page 44
Zip
Page 48
GARAGE DOORS
COMMERCIAL
T-SkyPage 54
SpinPage 58
BIUNO-BTPage 64
BIUNO Page 66
INDYPage 68
F10Page 70
AUTOMATIC DOORS
BARRIERS
BrinkPage 74
T-LINEPage 76
KIT
Page 80
FRAME BRAKE-OUT SYSTEM
Page 81
Rblo Page 84
Rblo-XPage 86
Rblo-LPage 88
Rblo-LXPage 90
LUXEPage 92
ParkPage 95
T-STOPPage 96
WINDOWS & SHUTTERS
ACCESSORIES
T-Win Page 100
MrcmPage 102
MF30Page 106
TransmittersPage 110
OpticPage 116
FotPage 117
RtaPage 118
LampPage 119
Safety EdgesPage 120
T-keyPage 122
Control UnitsPage 124
Solar EnergyPage 130
Force MetersPage 132
ExpoPage 133
SpecsPage 134
Sales TermsPage 135
SLIDING GATES
T-One
Master
Big
MADE IN ITALY
24 T-ONE
GATE OPERATOR
VOLT
3B
For gates up to 400 Kg
350T-ONE3B
DC sliding gate operator with encoder, complete with electronic control unit and built-in 433,92
MHz rolling code radio receiver. Maximum gate
weight 400 kg.
Features:
• residential / apartment building use
• for gates up to 400 kg
• low voltage DC gate operator
• encoder technology
(no limit switches required)
• electronic control unit with built-in receiver
• only available in the kit version
Pros:
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage
thanks to the optional backup battery
• external emergency release available
(optional, P/N 650ESE03)
• soft start and soft stop
Protected
control Board:
The electronic control
unit is well protected
from the outside within
its plastic shell.
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Max. operating speed
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
Max. gate leaf weight
Pinion module
Electronic control unit
T-ONE3B
230 V AC (50 - 60 Hz)
24 V DC
1,3 A
200 W
14 m/min
100 %
320 N
-20° C ÷ +55° C
IP 54
400 kg
4
K120M
Safety:
Encoder technology as
standard on all versions
in order to grant a
continued and reliable
obstacle control.
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
12
M A D E I N I T A LY
288,3
T-ONEKIT3BT
Complete automation kit for sliding gates up to 400 kg, with 350T-ONE3B gate
operator
92,9
Accessories included in the kit:
163,5
202,7
900OPTIC
300T-KEY
aluminium
+ LED TSL
250ANTD
900LAMP5
250K-SLIMRP
308,5
C-CRT
Accessories
200KB3
Battery charger and backup battery kit
650ESE03
External emergency release
device (flush-mounted) with
tamper-proof housing and 4
m cable
400CPO
Counterplate
900BSD15
Deformable safety edge kit
l=1,5 m
400CPOR
Adjustable counterplate
900TWC
Wireless safety edge
transmitter
400CN
Steel core, fibreglass
reinforced, 22x22 nylon rack
(Module 4, max 800 kg)
900TWM
Wireless safety edge
master receiver
400VP40
Screws for 400CN (40
screws per pkg)
700BAP4
Gate stopper with spring
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
S-350K120M00
Replacement electronic
control unit
13
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
12 T-ONE
GATE OPERATOR
VOLT
5B-8BR-10B
For gates up to 1000 Kg
350T-ONE5B
DC sliding gate operator with encoder, complete
with electronic control unit and built-in 433,92 MHz
rolling code radio receiver. Maximum gate weight
600 kg.
350T-ONE8BR
DC sliding gate operator with encoder, complete
with electronic control unit and built-in 433,92 MHz
rolling code radio receiver. Speed up to 24 m/min.
Maximum gate weight 800 kg.
350T-ONE10B
DC sliding gate operator with encoder, complete
with electronic control unit and built-in 433,92 MHz
rolling code radio receiver. Maximum gate weight
1000 kg.
Features:
• residential / apartment building use
• for gates up to 1000 kg
• low voltage DC gate operator
• optical encoder technology
(no limit switches required)
• electronic control unit with built-in
two-channel receiver
• built-in battery charger
Pros:
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage thanks to the
optional backup battery
• 35% faster than the 230 V version
• intensive use, ideal for use on apartment
buildings and public entrances
• external emergency release available
(optional, P/N 650ESE03)
• soft start and soft stop
Protected control
board: The electronic
control unit is well protected from the outside
within its plastic shell
Safety:
Optical encoder
technology as standard
on all versions in order
to grant a continued
and reliable obstacle
control.
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Max. operating speed
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
Max. gate leaf weight
Pinion module
Electronic control unit
T-ONE5B
T-ONE8BR
230 V AC (50 - 60 Hz) 230 V AC (50 - 60 Hz)
18 V DC
24 V DC
1,05 A
1,05 A
250 W
300 W
14 m/min
24 m/min
100 %
100 %
980 N
980 N
-20° C ÷ +55° C
-20° C ÷ +55° C
IP 54
IP 54
600 kg
800 kg
4
4
K125M
K126MA
T-ONE10B
230 V AC (50 - 60 Hz)
18 V DC
1,1 A
300 W
14 m/min
100 %
1080 N
-20° C ÷ +55° C
IP 54
1000 kg
4
K126MA
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
14
M A D E I N I T A LY
T-ONEKIT5BT
288,3
Complete automation kit for sliding gates up to 600 kg, with 350T-ONE5B gate
operator
T-ONEKIT10BT
92,9
Complete automation kit for sliding gates up to 1000 kg, with 350T-ONE10B
gate operator
Accessories included in the kit:
900OPTIC
300T-KEY
aluminium +
LED TSL
250ANTD
163,5
202,7
900LAMP4
250K-SLIMRP
308,5
C-CRT
Accessories
200BATT
12 V back-up battery, 7,2 Ah
with cable
650ESE03
External emergency release
device (flush-mounted) with
tamper-proof housing and 4
m cable
M-030KITKB20
Battery cables kit
(20 pcs)
900BSD15
Deformable safety edge kit
l=1,5 m
400CPO
Counterplate
900TWC
Wireless safety edge
transmitter
400CPOR
Adjustable counterplate
900TWM
Wireless safety edge
master receiver
S-350K125M00
Replacement electronic
control unit
S-500K126MA00
Replacement electronic
control unit
250SM126
Memory card for 126 radio
codes
250SM254
Memory card for 254 radio
codes
900T-COMM
Interface for connecting two
(2) control boards on master/
slave mode; enabling with
Tauprog for T-ONE8BR and
T-ONE10B models.
700BAP4
Gate stopper with spring
400CN
Steel core, fibreglass
reinforced, 22x22 nylon rack
(Module 4, max 800 kg)
400VP40
Screws for 400CN (40
screws per pkg)
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
15
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GATE OPERATOR
T-ONE
5-8-XL
For gates up to 1200 Kg
350T-ONE5
230 V sliding gate operator with encoder and electromechanical limit switch, complete with electronic control unit and built-in 433,92 MHz rolling code
radio receiver. Maximum gate weight 500 kg.
350T-ONE8
230 V sliding gate operator with encoder and electromechanical limit switch, complete with electronic
control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 800 kg.
350T-ONEXL
230 V sliding gate operator with encoder and electromechanical limit switch, complete with electronic
control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 1200 kg.
Features:
• residential / apartment building use
• for gates up to 500 / 800 / 1200 kg
• 230 V gate operator
• built-in mechanical limit switches,
magnetic limit switches available (optional)
• optical encoder technology for obstacle detection
• electronic control unit with built-in
two-channel receiver
• quick programming
Pros:
• quick and easy installation
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards*
suitable for large sliding gates
• high torque and power
• external emergency release available
(optional, P/N 650ESE03)
Control electronics:
Quick and intuitive
programming thanks to
signalling LEDs. Twochannel radio receiver
built-in the control unit
(433,92 MHz, 24 codes
to memorize)
Installation:
Safer installation thanks
to the 4 fixing points
and to the practical
height adjustment. The
cover is made of nonscratch UVA-resistant
engineering plastics.
Technical features
Power supply
Motor power supply
Absorption
Power rating
Speed maneuver
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
Max. gate leaf weight
Pinion module
Electronic control unit
T-ONE5
T-ONE8
T-ONEXL
230 V AC (50 - 60 Hz) 230 V AC (50 - 60 Hz) 230 V AC (50 - 60 Hz)
230 V AC
230 V AC
230 V AC
1,2 A
1,3 A
2,1 A
220 W
240 W
340 W
10,5 m/min
10,5 m/min
10,5 m/min
40 %
40 %
40 %
920 N
1160 N
1310 N
-20° C ÷ +55° C
-20° C ÷ +55° C
-20° C ÷ +55° C
150°C
150°C
150°C
IP 54
IP 54
IP 54
500 kg
800 kg
1200 kg
4
4
4
K580M
K580M
K580M
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
16
110
VOLT
M A D E I N I T A LY
AVAILABLE
T-ONEKIT5T
288,3
Complete automation kit for sliding gates up to 500 kg, with 350T-ONE5 gate
operator
T-ONEKIT8T
92,9
Complete automation kit for sliding gates up to 800 kg, with 350T-ONE8 gate
operator
T-ONEKITXLT
Complete automation kit for sliding gates up to 1200 kg, with 350T-ONEXL gate
operator
163,5
202,7
308,5
Accessories included in the kit:
900OPTIC
300T-KEY
aluminium
+ LED TSL
250ANTD
900LAMP3 250K-SLIMRP
C-CRT
Accessories
400CPO
Counterplate
900BSD15
Deformable safety edge kit
l=1,5 m
400CPOR
Adjustable counterplate
900TWC
Wireless safety edge
transmitter
400CN
Steel core, fibreglass
reinforced, 22x22 nylon rack
(Module 4, max 800 kg)
400CFZ12
Steel rack 30x12, complete
with screws (Module 4, max
2000 kg)
400VP40
Screws for 400CN
(40 screws per pkg)
900TWM
Wireless safety edge
master receiver
650ESE03
External emergency release
device (flush-mounted) with
tamper-proof housing and 4
m cable
S-350K580M00
Replacement electronic
control unit
700BAP4
Gate stopper with spring
400FCM
Magnetic limit switches
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
*The use of the wireless safety edge system is necessary in order to certify an installation
when the gate weight is more than 500 kg
17
12 MASTER
GATE OPERATOR
VOLT
For gates up to 1800 Kg
500MASTER-R
DC sliding gate operator with encoder, complete
with electronic control unit and built-in 433,92 MHz
rolling code radio receiver. Speed up to 24 m/min.
Maximum gate weight 1200 kg.
500MASTER18QR
DC sliding gate operator with encoder, complete
with electronic control unit and built-in 433,92 MHz
rolling code radio receiver. Maximum gate weight
1800 kg.
Features:
• apartment building / commercial use
• for gates up to 1800 kg
• low voltage DC gate operator
• optical encoder technology
• built-in battery charger
Pros:
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards*
• works even during power outage thanks to the
optional backup battery
• fast operating speed
• intensive use, ideal for use on apartment buildings and public entrances
• external emergency release available
(optional, P/N 650ESE02)
Protected control
board:
The electronic control
unit is well protected
from the outside within
its plastic shell
Technical features
Power supply
MASTER-R
230V AC (50 - 60 Hz)
MASTER18QR
230V AC (50 - 60 Hz)
Motor power supply
24 V DC
18 V DC
Open circuit voltage
Power rating
1,8 A
360 W
24 m/min (opening)
14 m/min (closing)
100 %
1300 N
-20° C ÷ +55° C
-
1,6 A
360 W
Max. operating speed
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
14 m/min
100 %
1500 N
-20° C ÷ +55° C
-
Degree of protection
IP 54
IP 54
Max. gate leaf weight
Pinion module
Electornic control unit
1200 Kg
Module 4
K126MA
1800 Kg
Module 4
K126MA
Practical:
The manual release
is easy, intuitive and
protected by a personal
key.
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
18
M A D E I N I T A LY
Accessories
550CPM
Counterplate
200BATT
12 V back-up battery, 7,2 Ah
with cable
550CPMR
Adjustable counterplate
650ESE02
External emergency release
device (flush-mounted) with
tamper-proof housing and 4
m cable
250SM126
Memory card for 126 radio
codes
250SM254
Memory card for 254 radio
codes
250SM1022
Memory card for 1022 radio
codes
S-500K126MA00
Replacement electronic control unit (500MASTER18QR
+ MASTER-R)
900TWC
Wireless safety edge
transmitter
900BSD20
Deformable safety edge kit
l=2 m
900TWM
Wireless safety edge
master receiver
400CFZ12
Steel rack 30x12, complete
with screws (Module 4, max
2000 kg)
700BAP4
Gate stopper with spring
400CFZ22 Steel rack 22x22 (Module 4,
max 3000 kg)
C-CRT
Warning signal
400VSF20
Screws and brackets for
400CFZ22 (40 units per pkg)
C-TARG
Aluminium CE mark label,
self adhesive
900T-COMM
RS485 Serial Interface to
connect two control units as
Master/Slave. Activation though
TAUPROG handheld device.
(K126MA-K206MA-D749MA)
*The use of the wireless safety edge system is necessary in order to certify an installation
when the gate weight is more than 500 kg
19
325
93
360
180,3
221,3
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GATE OPERATOR
MASTER
20
For gates up to 2000 Kg
500MASTER20QR
230 V sliding gate operator with encoder and limit
switch, complete with electronic control unit and
built-in 433,92 MHz rolling code radio receiver.
Maximum gate weight 2000 kg.
500MASTER20QM
230 V sliding gate operator with encoder and magnetic limit switches, complete with electronic control unit and built-in 433,92 MHz rolling code radio
receiver. Maximum gate weight 2000 kg.
500MASTER20T
400 V three-phase sliding gate operator with encoder without electronic control unit. Maximum gate
weight 2000 kg
Features:
• commercial use
• for gates up to 2000 kg
• 230 V (MASTER20QR/QM)
and 400 V (MASTER20T) gate operators
• optical encoder technology
for obstacle detection (MASTER20QR/QM only)
• electronic brake
• irreversible gate operator
• lever manual release mechanism
Pros:
• obstacle detection and crush prevention
• suitable for large sliding gates
• high torque and power thanks to the three-phase
400 Vac version (MASTER20T)
• external emergency release available
(optional, P/N 650ESE02)
Protected control
board:
The electronic control
unit is well protected
from the outside within
its plastic shell
Technical features
Power supply
Motor power supply
Motor Absorption
Power rating
Speed maneuver
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
Max. gate leaf weight
Pinion module
Electornic control unit
MASTER20QR/QM
230 V AC (50 - 60 Hz)
230 V AC
3,4 A
550 W
10,5 m/min
40 %
1890 N
-20° C ÷ +55° C
160° C
IP 54
2000 kg
Module 4
K580M
MASTER20T
400 V AC (50 - 60 Hz)
400 V AC
3,7 A
1000 W
10,5 m/min
58 %
1890 N
-20° C ÷ +55° C
150° C
IP 54
2000 kg
Module 4
D703 (external)
Practical:
The manual release
is easy, intuitive and
protected by a personal
key.
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
20
110
VOLT
M A D E I N I T A LY
AVAILABLE
Accessories
550CPM
Counterplate
650ESE02
External emergency release
device (flush-mounted) with
tamper-proof housing and 4
m cable
550CPMR
Adjustable counterplate
S-350K580M00
Replacement electronic control
unit (MASTER20QR/QM)
900BSD15
Deformable safety edge kit
l=1,5 m
600D703
230/400 V electronic control
unit for one gate operator
with electrical brake
(MASTER20T)
900BSD20
Deformable safety edge kit
l=2 m
400CFZ12
Steel rack 30x12, complete
with screws (Module 4, max
2000 kg)
900TWM
Wireless safety edge
master receiver
400CFZ22
Steel rack 22x22 (Module 4,
max 3000 kg)
900TWC
Wireless safety edge
transmitter
400VSF20
Screws and brackets for
400CFZ22 (40 units per
pkg)
250RXSM2
Self-learning, two-channel,
433,92 MHz plug-in radio
receiver. Accepts up to 14
rolling code transmitters or
unlimited dipswitch transmitters.
C-TARG
Aluminium CE mark label,
self adhesive
700BAP4
Gate stopper with spring
C-CRT
Warning signal
325
93
360
180,3
221,3
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
21
400
VOLT
GATE OPERATOR
BIG
18QI
For gates up to 2500 Kg
500BIG18QI
400 V three-phase sliding gate operator complete
with electronic control unit. Maximum gate weight
2500 kg. STAINLESS STEEL housing.
See page 25 for accessories
Features:
• commercial use
• for gates up to 2500 kg
• 400 V three-phase gate operator
• STAINLESS STEEL housing
• manual release mechanism
• adjustable mechanical clutch
Technical features
Power supply
Motor power supply
Absorption
Power rating
Speed maneuver
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
Max. gate leaf weight
Pinion module
Electornic control unit
Pros:
• suitable for large sliding gates
• high torque and power thanks
to the three-phase technology
• self-ventilated operator to increase
the working cycle
• metal and bronze gears to increase
endurance and reduce noise
BIG18QI
400 V AC (50 - 60 Hz)
400 V AC
3A
1000 W
10 m/min
55 %
1850 N
-20° C ÷ +55° C
150° C
IP 54
2500 kg
Module 4
D703
420
99
262
312
312
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
22
O P E R AT O R
BIG
30Q
400
VOLT
For gates up to 3500 Kg
500BIG30Q
400 V three-phase sliding gate operator complete
with electronic control unit. Maximum gate weight
3500 kg.
See page 25 for accessories
Technical features
Power supply
Motor power supply
Absorption
Absorbed power
Speed maneuver
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
Max. gate leaf weight
Pinion module
Electornic control unit
Features:
• commercial use
• for gates up to 3500 kg
• 400 V three-phase gate operator
• oil bath vertical pinion operator
• painted steel housing
• manual release mechanism
• mechanical clutch for crush prevention
BIG30Q
400 V AC (50 - 60 Hz)
400 V AC
3,6 A
1500 W
12,5 m/min
50 %
3500 N
-20° C ÷ +55° C
150° C
IP 54
3500 kg
Module 4
D703
Pros:
• suitable for large sliding gates
• high torque and power thanks
to the three-phase technology
• self-ventilated operator to increase
the working cycle
• metal and bronze gears to increase
endurance and reduce noise
573
179
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
23
300
352,5
370
400
VOLT
GATE OPERATOR
BIG
40Q
For gates up to 4000 Kg
500BIG40Q
400 V three-phase sliding gate operator for intensive use complete with electronic control unit and
“soft-start”. Maximum gate weight 4000 kg.
Features:
• commercial use
• for gates up to 4000 kg
• 400 V three-phase gate operator
• oil bath vertical pinion operator
• soft start acceleration ramp and soft stop
• manual release mechanism
• module 6 rack pinion version
available upon request
• mechanical clutch for crush prevention
Technical features
Power supply
Motor power supply
Absorption
Power rating
Max. operating speed
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
Max. gate leaf weight
Pinion module
Electornic control unit
Pros:
• suitable for huge sliding gates
• high torque and power thanks to the
three-phase technology
• self-ventilated operator to increase
the working cycle
• metal and bronze gears to increase
endurance and reduce noise
• intensive use (50% duty cycle)
BIG40Q
400 V AC (50 - 60 Hz)
400 V AC
3,6 A
1500 W
12,5 m/min
50 %
3500 N
-20° C ÷ +55° C
150° C
IP 54
4000 kg
Module 4
D703
616
179
370
422
440
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
24
M A D E I N I T A LY
Accessories for “BIG” series of Sliding Gate Operators
400CP12
BIG18QI counterplate
S-600D703M00
230/400 V replacement
electronic control unit for
one gate operator with
electrical brake
400CP30
BIG30Q counterplate
400CFZ22
Steel rack 22x22 (Module 4,
max 3000 kg)
400CP40
BIG40Q counterplate
400VSF20
Screws and brackets for
400CFZ22 (40 units per
pkg)
900BSD15
Deformable safety edge kit
l=1,5 m
550CFZ06
Steel rack 30x30 (Module 6,
max 4000 kg)
900BSD20
Deformable safety edge kit
l=2 m
M-ING0000Z12BIG
Pinion module 6
(BIG30Q/40Q)
900TWC
Wireless safety edge
transmitter
C-TARG
Aluminium CE mark label,
self adhesive
900TWM
Wireless safety edge
master receiver
750COL
Control unit mounting post
700BAP4
Gate stopper with spring
250RXSM2
Self-learning, two-channel,
433,92 MHz plug-in radio
receiver. Accepts up to 14 rolling
code transmitters or unlimited
dipswitch transmitters.
C-CRT
Warning signal
250SM126
Memory card for 126 radio
codes
25
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
SWING GATES
Arm2000
Arm200
R18
R40/30
Easy
Zip
MADE IN ITALY
12 ARM
GATE OPERATOR
VOLT
2000BI
3000BI
For gate leaves up to 4 m
650ARM2000BI
DC electromechanical covered screw gate operator with encoder. Maximum gate leaf 3 m.
650ARM3000BI
DC electromechanical covered screw gate operator with encoder. Maximum gate leaf 4 m.
Features:
• residential use
• for gates leaves up to 4 m
• low voltage DC gate operator
• optical encoder technology
• covered screw gate operator
Pros:
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage thanks to the
optional backup battery
• fast operating speed
• soft start and soft stop
• intensive use, ideal for use on apartment buildings and public entrances
• bronze lead nut for strength and silent operation
• electrical connections are easier thanks to the
larger upper space
• quick and easy installation
Easy mounting
Multi-position adjustable brackets allow
greater flexibility during
assembly even on non
standard sized posts
(sold separately).
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Opening time 90°
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
ARM2000BI
230 V AC (50 - 60 Hz)
18 V DC
1,1 A
120 W
12 sec.
100 %
2600 N
-20° C ÷ +55° C
IP 44
ARM3000BI
230 V AC (50 - 60 Hz)
18 V DC
1,1 A
120 W
18 sec.
100 %
2600 N
-20° C ÷ +55° C
IP 44
Manual release with
personal key
Easy-to-operate manual
release with key lock for
the less skilled users.
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
28
M A D E I N I T A LY
KARM2000BI
122,5
Complete double arm automation kit for gates up to 3 + 3 m, with two
650ARM2000BI gate operators
396 (ARM2000)
506 (ARM3000)
KARM3000BI
803 (ARM2000)
913 (ARM3000)
Complete double arm automation kit for gates up to 4 + 4 m, with two
650ARM3000BI gate operators
907,3 (ARM2000)
1016,7 (ARM3000)
Accessories included in the kit:
99
900OPTIC
750D749MA
300T-KEY
aluminium
+ LED TSL
250ANTD
900LAMP4
Limit to use*
800
C-CRT
Accessories
200BATT
12 Volt Battery, 7,2 Ah
with cable
M-030KITKB20
Battery cables kit (20 pcs)
750D749MA
Electronic control unit for one
or two DC gate operators with
encoder, complete with 433,92
Mhz rolling code radio receiver,
battery charger, transformer and
enclosure
700BAP
Gate stopper for heavy
leaves
M-030000CC50
Multicore cable (2 x 2.5
sq.mm + 3 x 0.5 sq.mm)
700BAP1
Gate stopper for light leaves
600
Weight of leaf (Kg)
250K-SLIMRP
ARM2000BI
ARM3000BI
500
400
320
1
700GS5
Weatherproof cable
connector for 5-core 12 V
cable
1,5
2
2,5
3
3,5
4
Width of leaf (m)
*They refer to leaves with openings and not totally
closed panels.
700BAP2
Gate stopper wall/floor
mount
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
650ARMKITFCR
Adjustable mechanical
stoppers (2 pcs)
P-650ARMKITSTF
Multi-position adjustable
brackets
250SM126
Memory card for 126 radio
codes
Use only M-030000CC50 cable or equivalent
See page 134 for assembly measurements and opening angle
29
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GATE OPERATOR
ARM
2000IS/IF/IFC
3000IFC
For gate leaves up to 4 m
650ARM2000IS
230 V electromechanical covered screw gate
operator. Maximum gate leaf 3 m.
650ARM2000IF
230 V electromechanical covered screw gate
operator with opening electical limit switch. Maximum gate leaf 3 m.
650ARM2000IFC
230 V electromechanical covered screw gate
operator with opening and closing electrical limit
switches. Maximum gate leaf 3 m.
650ARM3000IFC
230 V electromechanical covered screw gate
operator with opening and closing electrical limit
switches. Maximum gate leaf 4 m.
Features:
• residential use
• for gates leaves up to 4 m
• 230 V gate operator
• built-in capacitor
• covered screw gate operator
• adjustable mounting brackets (sold separately)
Pros:
• bronze lead nut for strength and silent operation
• electrical connections are easier thanks to the
larger upper space
• quick and easy installation
• manual release with key lock
• high torque and power
Easy mounting
Quick and easy
installation thanks to the
multi-position adjustable
mounting brackets
supplied with each
gate operator (sold
separately).
Technical features
Power supply
Motor power supply
Absorption
Power rating
Opening time 90°
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
ARM2000IS/IF/IFC
230 V AC (50 - 60 Hz)
230 V AC
1,5 A
280 W
20 sec.
36 %
2300 N
-20° C ÷ +55° C
160° C
IP 44
ARM3000IFC
230 V AC (50 - 60 Hz)
230 V AC
1,5 A
280 W
28 sec.
36 %
2300 N
-20° C ÷ +55° C
160° C
IP 44
Adjustable limit
switches
Electro-mechanical limit
switches allow gate
position adjustment
even when gate
stoppers are not used
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
30
110
VOLT
M A D E I N I T A LY
AVAILABLE
KARM2000IS
122,5
Complete double arm automation kit for gates up to 3 + 3 m, with two
650ARM2000IS gate operators
396 (ARM2000)
506 (ARM3000)
KARM3000IS
803 (ARM2000)
913 (ARM3000)
Complete double arm automation kit for gates up to 4 + 4 m, with two
650ARM3000IFC gate operators
907,3 (ARM2000)
1016,7 (ARM3000)
Accessories included in the kit:
99
750D760M
900OPTIC
300T-KEY
aluminium +
LED TSL
250ANTD
900LAMP3
Limit to use*
800
C-CRT
Accessories
750D760M
Electronic control unit for one or
two 230 V gate operators with
soft-stop and built-in 433,92
MHz rolling code radio receiver,
complete with enclosure
700BAP
Gate stopper for heavy
leaves
750CUP
Control unit enclosure
protective lid
700BAP1
Gate stopper for light leaves
700GS3
Weatherproof cable
connector for 3-core 230 V
cable
700BAP2
Gate stopper wall/floor
mount
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
650ARMKITFCR
Adjustable mechanical
stoppers (2 pcs)
C-TARG
Aluminium CE Mark Label,
self adhesive
P-650ARMKITSTF
Multi-position adjustable
brackets
600
Weight of leaf (Kg)
250K-SLIMRP
ARM2000
ARM3000
500
400
320
1
1,5
2
2,5
3
3,5
4
Width of leaf (m)
*They refer to leaves with openings and not totally
closed panels.
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
See page 134 for assembly measurements and opening angle
31
12 ARM
GATE OPERATOR
VOLT
BI
For gate leaves up to 5 m
650ARM225BI
DC electromechanical linear gate operator with
encoder. Maximum gate leaf 3 m.
650ARM250BI
DC electromechanical linear gate operator with
encoder. Maximum gate leaf 4 m.
650ARM270BI
DC electromechanical linear gate operator with
encoder. Maximum gate leaf 5 m.
Features:
• residential / apartment building / commercial use
• for gates leaves up to 5 m
• low voltage DC gate operator
• optical encoder technology
• rod extension gate operator
• adjustable mounting brackets (sold separately)
Pros:
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage thanks to the
optional backup battery
• fast operating speed
• soft start and soft stop
• intensive use, ideal for use on apartment
buildings and public entrances
• electrical connections are easier thanks
to the larger upper space
• quick and easy installation
• suitable for large gates and non standard
sized posts
Easy mounting
Multi-position adjustable
brackets allow greater
flexibility during
assembly even on non
standard sized posts
(sold separately)
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Opening time 90°
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
ARM225BI
ARM250BI
ARM270BI
230 V AC (50 - 60 Hz) 230 V AC (50 - 60 Hz) 230 V AC (50 - 60 Hz)
18 V DC
18 V DC
18 V DC
1A
1A
1A
120 W
120 W
120 W
12 sec.
12,5 sec.
13 sec.
100 %
100 %
100 %
2600 N
2600 N
2600 N
-20° C ÷ +55° C
-20° C ÷ +55° C
-20° C ÷ +55° C
IP 44
IP 44
IP 44
Manual release with
personal key
Easy-to-operate manual
release with key lock for
the less skilled users
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
32
M A D E I N I T A LY
KARM225BI
122,5
Complete double arm automation kit for gates up to 3 + 3 m, with two
650ARM225BI gate operators
A
KARM250BI
B
Complete double arm automation kit for gates up to 4 + 4 m, with two
650ARM250BI gate operators
C
KARM270BI
99
Complete double arm automation kit for gates up to 5 + 5 m, with two
650ARM270BI gate operators
Accessories included in the kit:
900OPTIC
750D749MA
300T-KEY
aluminium +
LED TSL
250ANTD
ARM
A
B max
C max
225BI
290
1070
1098
250BI
425
1350
1378
270BI
530
1560
1588
900LAMP4
Limit to use*
800
600
250K-SLIMRP
C-CRT
Accessories
750D749MA
Electronic control unit for one
or two DC gate operators with
encoder, complete with 433,92
Mhz rolling code radio receiver,
battery charger, transformer and
enclosure
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
200BATT
12 Volt Battery, 7,2 Ah
700BAP
Gate stopper for heavy
leaves
M-030KITKB20
Battery cables kit (20 pcs)
700GS5
Weatherproof cable
connector for 5-core 12 V
cable
M-030000CC50
Multicore cable (2 x 2.5
sq.mm + 3 x 0.5 sq.mm)
C-TARG
Aluminium CE Mark Label,
self adhesive
250SM126
Memory card for 126 radio
codes
P-650ARMKITSTF
Multi-position adjustable
brackets
Weight of leaf (Kg)
500
400
320
ARM225BI
260
ARM250BI
ARM270BI
220
1,5
2
2,5
3
3,5
4
4,5
5
Width of leaf (m)
*They refer to leaves with openings and not totally
closed panels.
Use only M-030000CC50 cable or equivalent
See page 134 for assembly measurements and opening angle
33
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GATE OPERATOR
ARM
225I/250I/270I
For gate leaves up to 5 m
650ARM225I
230 V electromechanical linear gate operator.
Maximum gate leaf 3 m.
650ARM250I
230 V electromechanical linear gate operator.
Maximum gate leaf 4 m.
650ARM270I
230 V electromechanical linear gate operator.
Maximum gate leaf 5 m.
Features:
• residential / commercial use
• for gates leaves up to 5 m
• 230 V gate operator
• built-in capacitor
• rod extension gate operator
• adjustable mounting brackets (sold separately)
Pros:
• electrical connections are easier
thanks to the larger upper space
• quick and easy installation
• manual release with key lock
• high torque and power
• suitable for large gates and non standard
sized posts
Easy mounting
Multi-position adjustable
brackets allow greater
flexibility during
assembly even on non
standard sized posts
(sold separately)
Technical features
Power supply
Motor power supply
Absorption
Power rating
Opening time 90°
Duty cycle
Max. thrust
Operating temperature
Motor thermal protection
Degree of protection
ARM225I
ARM250I
ARM270I
230 V AC (50 - 60 Hz) 230 V AC (50 - 60 Hz) 230 V AC (50 - 60 Hz)
230 V AC
230 V AC
230 V AC
1,5 A
1,5 A
1,5 A
280 W
280 W
280 W
20 sec.
20,5 sec.
21 sec.
36 %
36 %
36 %
2300 N
2300 N
2300 N
-20° C ÷ +55° C
-20° C ÷ +55° C
-20° C ÷ +55° C
160° C
160° C
160° C
IP 44
IP 44
IP 44
Exclusive design
The new shapes adapt
to any type of gate and
have been designed to
simplify installation and
maintenance
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
34
110
VOLT
M A D E I N I T A LY
AVAILABLE
KARM225I
Complete double arm automation kit for gates up to 3 + 3 m, with two
650ARM225I gate operators
122,5
A
KARM250I
B
Complete double arm automation kit for gates up to 4 + 4 m, with two
650ARM250I gate operators
C
KARM270I
Complete double arm automation kit for gates up to 5 + 5 m, with two
650ARM270I gate operators
Accessories included in the kit:
900OPTIC
750D760M
300T-KEY
aluminium +
LED TSL
250ANTD
99
ARM
A
B max
C max
225I
290
1070
1098
250I
425
1350
1378
270I
530
1560
1588
900LAMP3
800
Limit to use*
600
250K-SLIMRP
C-CRT
Accessories
Weight of leaf (Kg)
500
400
320
ARM225I
260
ARM250I
ARM270I
220
1,5
2
2,5
3
3,5
4
4,5
5
Width of leaf (m)
750D760M
Electronic control unit for one or
two 230 V gate operators with
soft-stop and built-in 433,92
MHz rolling code radio receiver,
complete with enclosure
700BAP
Gate stopper for heavy
leaves
750CUP
Control unit enclosure
protective lid
700BAP1
Gate stopper for light leaves
700GS3
Weatherproof cable
connector for 3-core 230 V
cable
700BAP2
Gate stopper wall/floor
mount
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
C-TARG
Aluminium CE Mark Label,
self adhesive
*They refer to leaves with openings and not totally
closed panels.
P-650ARMKITSTF
Multi-position adjustable
brackets
See page 134 for assembly measurements and opening angle
35
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
12 R18
GATE OPERATOR
VOLT
BENC
For gate leaves up to 1,8 m
650R18BENC
DC electromechanical gate operator with encoder. Maximum gate leaf 1,8 m (foundation
box to be ordered separately) with cable l=2,3 m.
650R18BENCL
DC electromechanical gate operator with encoder. Maximum gate leaf 1,8 m (foundation box
to be ordered separately) with cable l=5 m.
650R18BENCVEL
DC fast electromechanical gate operator with
encoder. Maximum gate leaf 1,2 m / 200 kg
(foundation box to be ordered separately) with
cable l=2,3 m.
Features:
• residential use
• for gates leaves up to 1,8 m
• low voltage DC gate operator
• optical encoder technology
• electromechanical motor
Pros:
• compact size
• virtually invisible, does not affect
the design of the gate
• opening up to 360° with no additional accessories
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage
thanks to the optional backup battery
• fast operating speed
• intensive use, ideal for use on apartment
buildings and public entrances
Watertight
The new watertight
collar diverts rain water
ensuring a complete
and lasting protection.
Opening up to 360°
The compact R18 gate
operator is ideal where
space is an issue
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
R18BENC/L
230 V AC (50 - 60 Hz)
18 V DC
0,7 A
120 W
13 sec.
100 %
192 Nm
-20° C ÷ +55° C
IP 67
R18BENCVEL
230 V AC (50 - 60 Hz)
18 V DC
0,8 A
120 W
9 sec.
100 %
180 Nm
-20° C ÷ +55° C
IP 67
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
36
M A D E I N I T A LY
INSIDEKIT04A
Complete underground automation kit for gates up to 1,8 + 1,8 m, with two
650R18BENC gate operators (1 with cable l=2,3 m + 1 with cable l=5 m)
417
130
Accessories included in the kit (foundation boxes to be ordered separately):
161
900OPTIC
250K-SLIMRP
750D749MA
300T-KEY
aluminium +
LED TSL
250ANTD
900LAMP4
C-CRT
Accessories
200BATT
12 Volt Battery, 7,2 Ah
with cable
700CFR18X
Stainless steel foundation
box with release system
M-030KITKB20
Battery cables kit (20 pcs)
Weight of leaf (Kg)
400
700CFR18CT
Cataphoresis steel
foundation box with release
system
Limit to use*
200
R18BENCVEL
150
R18BENC
0,6
1,2
1,8
Width of leaf (m)
700BRC18
R18 Retrofit adapter arm
700GS5
Weatherproof cable
connector for 5-core 12 V
cable
750D749MA
Electronic control unit for one
or two DC gate operators with
encoder, complete with 433,92
Mhz rolling code radio receiver,
battery charger, transformer and
enclosure
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
M-030000CC50
Multicore cable (2 x 2.5
sq.mm + 3 x 0.5 sq.mm)
250SM126
Memory card for 126 radio
codes
650FCR18
“R18” mechanic limit switch
250SM254
Memory card for 254 radio
codes
Use only M-030000CC50 cable or equivalent
37
*They refer to leaves with openings and not totally
closed panels.
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GATE OPERATOR
R18
For gate leaves up to 1,8 m
650R18
230 V electromechanical gate operator. Maximum gate leaf 1,8 m (foundation box to be
ordered separately) with cable l=2,3 m.
650R18L
230 V electromechanical gate operator. Maximum gate leaf 1,8 m (foundation box to be
ordered separately) with cable l=5 m.
Features:
• residential use
• for gates leaves up to 1,8 m
• 230 V gate operator
• electromechanical motor
Pros:
• compact size
• virtually invisible, does not affect
the design of the gate
• opening up to 360° with no additional
accessories
• manual release
• high torque and power
Watertight
The new watertight
collar diverts rain water
ensuring a complete
and lasting protection.
Technical features
Power supply
Motor power supply
Absorption
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
R18/L
230 V AC (50 - 60 Hz)
230 V AC
1,3 A
240 W
22 sec.
32 %
148 Nm
-20° C ÷ +55° C
160° C
IP 67
Opening up to 360°
The compact R18 gate
operator is ideal where
space is an issue
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
38
M A D E I N I T A LY
INSIDEKIT05T
Complete underground automation kit for gates up to 1,8 + 1,8 m, with two
650R18 gate operators (1 with cable l=2,3 m + 1 with cable l=5 m)
417
130
Accessories included in the kit (foundation boxes to be ordered separately):
900OPTIC
750D760M
250K-SLIMRP
300T-KEY
aluminium +
LED TSL
250ANTD
161
900LAMP3
C-CRT
Accessories
700GS3
Weatherproof cable
connector for 3-core 230 V
cable
700CFR18X
Stainless steel foundation
box with release system
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
Weight of leaf (Kg)
700CFR18CT
Cataphoresis steel
foundation box with release
system
Limit to use*
400
200
150
R18
0,6
1,2
1,8
Width of leaf (m)
700BRC18
R18 Retrofit adapter arm
700BAP
Gate stopper for heavy
leaves
*They refer to leaves with openings and not totally
closed panels.
750D760M
Electronic control unit for one or
two 230 V gate operators with
soft-stop and built-in 433,92
MHz rolling code radio receiver,
complete with enclosure
700BAP1
Gate stopper for light leaves
750CUP
Control unit enclosure
protective lid
700BAP2
Gate stopper wall/floor
mount
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
650FCR18
“R18” mechanic limit switch
39
12 R40
GATE OPERATOR
VOLT
For gate leaves up to 3,5 m
650R40
DC electromechanical gate operator with encoder. Maximum gate leaf 3,5 m / 400 kg with
cable l=2,3 m (foundation box to be ordered separately).
650R40L
DC electromechanical gate operator with encoder.
Maximum gate leaf 3,5 m / 400 kg with cable l=9
m (foundation box to be ordered separately).
Features:
• residential / apartment building use
• for gates leaves up to 3,5 m
• low voltage DC gate operator
• optical encoder technology
• electromechanical motor
• protection degree IP67
Pros:
• virtually invisible, does not affect the design
of the gate
• opening up to 180° thanks
to the optional 700KIT180 kit
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even in case of a power cut thanks
to the optional battery pack
• works even during power outage thanks
to the optional backup battery
• intensive use, ideal for use on apartment
buildings and public entrances
• watertight for reliable operation
Watertight
Water proof
design ensuring a
complete and lasting
proteaction.
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
R40/L
230 V AC (50 - 60 Hz)
18 V DC
1,3 A
300 W
13 sec.
100 %
458 Nm
-20° C ÷ +55° C
IP 67
Stainless Steel Box
The stainless steel
foundation box ensures
the highest resistance
from corrosion.
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
40
M A D E I N I T A LY
Accessories
700CFCT
Cataphoresis steel
foundation box with release
system
750D749MA
Electronic control unit for one
or two DC gate operators with
encoder, complete with 433,92
Mhz rolling code radio receiver,
battery charger, transformer and
enclosure
700CFC
Hot-dip galvanized
foundation box with release
system
200BATT
12 Volt Battery, 7,2 Ah
700CFX
Stainless steel foundation
box with release system
M-030KITKB20
Battery cables kit (20 pcs)
S-700CFR4060C
Stainless steel cover lid for
foundation box
700GS5
Weatherproof cable
connector for 5-core 12 V
cable
330
159
404
Limit to use*
800
Weight of leaf (Kg)
600
500
400
2
700KIT180
180° opening kit
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
700KITBFR
Adjustable mechanical stop
lever
M-030000CC50
Multicore cable (2 x 2.5
sq.mm + 3 x 0.5 sq.mm)
C-TARG
Aluminium CE Mark Label,
self adhesive
250SM126
Memory card for 126 radio
codes
250SM254
Memory card for 254 radio
codes
250SM1022
Memory card for 1022 radio
codes
Use only M-030000CC50 cable or equivalent
41
2,5
3
3,5
Width of leaf (m)
*They refer to leaves with openings and not totally
closed panels.
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GATE OPERATOR
R30
For gate leaves up to 3,5 m
650R30
230 V electromechanical gate operator. Maximum
gate leaf 3,5 m / 400 kg with cable l=2,3 m (foundation box to be ordered separately).
650R30L
230 V electromechanical gate operator. Maximum
gate leaf 3,5 m / 400 kg with cable l=9 m (foundation box to be ordered separately).
Features:
• residential use
• for gates leaves up to 3,5 m
• 230 V gate operator
• electromechanical motor
• protection degree IP67
Pros:
• virtually invisible, does not affect
the design of the gate
• opening up to 180° thanks to
the optional 700KIT180 kit
• watertight for reliable operation
• manual release
• high torque and power
• suitable for large gates and non standard
sized posts
Watertight
Water proof
design ensuring a
complete and lasting
proteaction.
Technical features
Power supply
Motor power supply
Absorption
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
R30/L
230 V AC (50 - 60 Hz)
230 V AC
1,4 A
260 W
16,5 sec.
33 %
402 Nm
-20° C ÷ +55° C
160° C
IP 67
Stainless Steel Box
The stainless steel
foundation box ensures
the highest resistance
from corrosion.
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
42
M A D E I N I T A LY
330
159
Accessories
404
700CFCT
Cataphoresis steel
foundation box with release
system
750CUP
Control unit enclosure
protective lid
700CFC
Hot-dip galvanized
foundation box with release
system
700GS3
Weatherproof cable
connector for 3-core 230 V
cable
Limit to use*
800
700CFX
Stainless steel foundation
box with release system
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
Weight of leaf (Kg)
600
500
400
2
3
3,5
Width of leaf (m)
S-700CFR4060C
Stainless steel cover lid for
foundation box
700BAP
Gate stopper for heavy
leaves
700KIT180
180° opening kit
700BAP2
Gate stopper wall/floor
mount
700KITBFR
Adjustable mechanical stop
lever
750D760M
Electronic control unit for one
or two 230 V gate operators
with soft-stop and built-in
433,92 MHz rolling code radio
receiver, complete with enclosure
C-TARG
Aluminium CE Mark Label,
self adhesive
2,5
*They refer to leaves with openings and not totally
closed panels.
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
43
12 EASY
GATE OPERATOR
VOLT
12
For gate leaves up to 2,3 m
650EASY12 DX
DC electromechanical gate operator with encoder.
Right Hand operation. Maximum gate leaf 2,3 m.
Complete with hinged arm.
650EASY12 SX
DC electromechanical gate operator with encoder.
Left Hand operation. Maximum gate leaf 2,3 m.
Complete with hinged arm.
650EASY12QR DX
DC electromechanical gate operator with built-in
electronic control board and rolling code radio receiver. Right hand operation, conceived for gate
leaves up to 2,3m, complete with hinged arm.
650EASY12QR SX
DC electromechanical gate operator with builtin electronic control board and rolling code radio
receiver. Left hand operation, conceived for gate
leaves up to 2,3m, complete with hinged arm.
Features:
• residential use
• for gates leaves up to 2,3 m
• low voltage DC gate operator
• optical encoder technology
• electromechanical motor
Pros:
• compact size
• ideal for big posts
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage
thanks to the optional backup battery
• fast operating speed
• intensive use, ideal for use on apartment
buildings and public entrances
• external emergency release available
(optional, P/N 650ESE)
Manual release
Easy-to-operate manual
release with key lock
for the less skilled
users. Optional external
emergency release
device
Protected
Control Board
The electronic control
unit – with built-in
radio receiver– is well
protected within its
plastic shell.
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
Electornic control unit
EASY12
230 V AC (50 - 60 Hz)
18 V DC
0,5 A
120 W
10 sec.
100 %
157 Nm
-20° C ÷ +55° C
IP 44
D749MA
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
44
M A D E I N I T A LY
EASYKIT03C
Complete double arm automation kit for gates up to 2,3 + 2,3 m, with one
650EASY12QR and one 650EASY12 gate operators
241
Accessories included in the kit:
197
900OPTIC
300T-KEY
aluminium +
LED TSL
250ANTD
900LAMP4
250K-SLIMRP
C-CRT
Accessories
650ESE
External emergency release
device with tamper-proof
housing and 5 m cable
700GS5
Weatherproof cable
connector for 5-core 12 V
cable
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
Limit to use*
300
250
Weight of leaf (Kg)
S-750D749MA
Replacement electronic
control unit
205
215
200
1
1,5
2
2,3
Width of leaf (m)
*They refer to leaves with openings and not totally
closed panels.
200KBE
Back-up battery kit
700BAP2
Gate stopper wall/floor
mount
650BRCE1
Straight arm with driving
track
M-030000CC50
Multicore cable (2 x 2.5
sq.mm + 3 x 0.5 sq.mm)
650KITFCEASY
“Easy” mechanic limit
switches kit
250SM126
Memory card for 126 radio
codes
C-TARG
Aluminium CE Mark Label,
self adhesive
BRCE1
Use only M-030000CC50 cable or equivalent
45
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GATE OPERATOR
EASY
QR
For gate leaves up to 2,3 m
650EASY DX
230 V electromechanical gate operator. Right
Hand operation. Maximum gate leaf 2,3 m. Complete with hinged arm.
650EASY SX
230 V electromechanical gate operator. Left Hand
operation. Maximum gate leaf 2,3 m. Complete
with hinged arm.
650EASYQR DX
230 V electromechanical gate operator complete with
electronic control unit and built-in 433,92 MHz rolling
code radio receiver. Right Hand operation. Maximum
gate leaf 2,3 m. Complete with hinged arm.
650EASYQR SX
230 V electromechanical gate operator complete with
electronic control unit and built-in 433,92 MHz rolling
code radio receiver. Left Hand operation. Maximum
gate leaf 2,3 m. Complete with hinged arm.
Features:
• residential use
• for gates leaves up to 2,3 m
• 230 V gate operator
• electronic control unit with built-in 433,92 MHz
radio receiver (EASYQR)
Pros:
• compact size
• easy and intuitive installation
• ideal for big posts
• external emergency release available
(optional, P/N 650ESE)
Manual release
Easy-to-operate manual
release with key lock
for the less skilled
users. Optional external
emergency release
device
Technical features
Power supply
Motor power supply
Absorption
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
EASYQR
EASY
230 V AC (50 - 60 Hz)
230 V AC
1,5 A
275 W
16 sec.
32 %
160 Nm
-20° C ÷ +55° C
150° C
IP 44
Protected
Control Board
The electronic control
unit – with built-in
radio receiver - is well
protected within its
plastic shell
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
46
M A D E I N I T A LY
EASYKIT02T
Complete double arm automation kit for gates up to 2,3 + 2,3 m, with one
650EASYQR and one 650EASY gate operators
241
Accessories included in the kit:
197
300T-KEY
aluminium +
LED TSL
250ANTD
900LAMP3
250K-SLIMRP
C-CRT
Accessories
650ESE
External emergency release
device with tamper-proof
housing and 5 m cable
Limit to use*
300
700BAP
Gate stopper for heavy
leaves
250
700GS3
Weatherproof cable
connector for 3-core 230 V
cable
700BAP1
Gate stopper for light leaves
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
700BAP2
Gate stopper wall/floor
mount
650KITFCEASY
“Easy” mechanic limit
switches kit
S-650D727M00
Electronic control unit
(replacement board)
650BRCE1
Straight arm with driving
track
C-TARG
Aluminium CE Mark Label,
self adhesive
Weight of leaf (Kg)
900OPTIC
205
215
200
1
1,5
2
2,3
Width of leaf (m)
*They refer to leaves with openings and not totally
closed panels.
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
BRCE1
47
12 ZIP
GATE OPERATOR
VOLT
12
For gate leaves up to 3,5 m
650ZIP12
DC electromechanical gate operator. Maximum
gate leaf 3,5 m.
Features:
• residential / apartment building use
• for gates leaves up to 3,5 m
• low voltage DC gate operator
• optical encoder technology
• electromechanical motor
• built-in limit switch
Pros:
• ideal for big posts
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage
thanks to the optional backup battery
• fast operating speed
• intensive use, ideal for use on apartment
buildings and public entrances
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
ZIP12
230 V AC (50 - 60 Hz)
18 V DC
1A
250 W
8 sec.
100 %
416 Nm
-20° C ÷ +55° C
IP 44
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
48
M A D E I N I T A LY
125
433
Accessories
140
750D749MA
Electronic control unit for one
or two DC gate operators with
encoder, complete with 433,92
Mhz rolling code radio receiver,
battery charger, transformer and
enclosure
700BAP
Gate stopper for heavy
leaves
200BATT
12 Volt Battery, 7,2 Ah
M-030KITKB20
Battery cables kit (20 pcs)
Limit to use*
300
700BAP1
Gate stopper for light leaves
250
Weight of leaf (Kg)
M-030000CC50
Multicore cable (2 x 2.5
sq.mm + 3 x 0.5 sq.mm)
700GS5
Weatherproof cable
connector for 5-core 12 V
cable
700BAP2
Gate stopper wall/floor
mount
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
C-TARG
Aluminium CE Mark Label,
self adhesive
250SM126
Memory card for 126 radio
codes
250SM254
Memory card for 254 radio
codes
215
200
2
2,5
3
3,5
Width of leaf (m)
*They refer to leaves with openings and not totally
closed panels.
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
250SM1022
Memory card for 1022 radio
codes
Use only M-030000CC50 cable or equivalent
49
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GATE OPERATOR
ZIP
For gate leaves up to 3,5 m
650ZIP
230 V electromechanical gate operator. Maximum gate leaf 3,5 m.
Features:
• residential use
• for gates leaves up to 3,5 m
• 230 V gate operator
• electromechanical motor
Pros:
• easy and intuitive installation
• ideal for big posts
• high torque and power
Technical features
Power supply
Motor power supply
Absorption
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
ZIP
230 V AC (50 - 60 Hz)
230 V AC
1A
190 W
13 sec.
50 %
334 Nm
-20° C ÷ +55° C
150° C
IP 44
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
50
M A D E I N I T A LY
125
433
140
Accessories
700BAP
Gate stopper for heavy
leaves
Limit to use*
250
Weight of leaf (Kg)
750D760M
Electronic control unit for one
or two 230 V gate operators
with soft-stop and built-in
433,92 MHz rolling code
radio receiver, complete with
enclosure
300
215
200
2
2,5
3
3,5
Width of leaf (m)
750CUP
Control unit enclosure
protective lid
700BAP1
Gate stopper for light leaves
700GS3
Weatherproof cable
connector for 3-core 230 V
cable
700BAP2
Gate stopper wall/floor
mount
650ESV1-2
Electric lock (1 = left hand
opening – 2 = right hand
opening)
C-TARG
Aluminium CE Mark Label,
self adhesive
51
*They refer to leaves with openings and not totally
closed panels.
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
GARAGE DOORS
T-Sky
Spin
MADE IN ITALY
24 T-SKY
GARAGE OPERATOR
VOLT
Torque 650 N
Features:
• residential use
• for sectional and up-and-over garage doors
• torque 650 N
• low voltage DC garage door opener
• optical encoder technology
• electronic control unit with built-in radio receiver
• built-in battery charger
• manual release mechanism
• courtesy light with time delay
Pros:
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage thanks to the
optional backup battery
• intensive use
• motor head turns 90° left/right
for installation in shorter garages
• pre-programmed electronic control unit
• exclusive “push & flip” opening system
Battery Pack
T-SKY garage door
opener will work even
when the power goes
out thanks to the
optional backup battery.
Technical features
Drive system
Power supply
Motor power supply
Open circuit voltage
Power rating
Max. operating speed
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
Traction Power
Electornic control unit
T-SKYKITC
T-SKYKITB
chain
belt
230 V AC (50 - 60 Hz)
24 V DC
1,3 A
250 W
0,185 m/s
100 %
10 Nm
-20° C ÷ +55° C
IP 40
650 N
K691
Push and Flip
The electronic control
unit is easily accessible
thanks to the exclusive
“push & flip” opening
system.
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
54
M A D E I N I T A LY
T-SKYKITB
DC garage door opener complete with one-piece 3 m belt drive rail and one
250T-4RP transmitter
270
T-SKYKITB3
DC garage door opener complete with three-piece (3 x 1 m) belt drive rail and
one 250T-4RP transmitter
148
427
T-SKYKITC
DC garage door opener complete with one-piece 3 m chain drive rail and one
250T-4RP transmitter
T-SKYKITC3
DC garage door opener complete with three-piece (3 x 1 m) chain drive rail and
one 250T-4RP transmitter
Accessories included in the kit:
Belt or chain
drive rail
250T-4RP
Transmitter
Accessories
750BATTSKY
Back-up battery kit, 1,2 Ah
and cable
900LAMP5
24 V flashing light
150SE
External emergency release
900OPTIC
Set of safety photocells
100BANT
Adapter for up-and-over
garage doors
100PROC
1 m extension chain drive rail
100BINSUPP
Set of additional fixing
brackets
100PROB
1 m extension belt drive rail
150SETSKY
External emergency release
for sectional door
M-030LAMP024LED
24V LED lamp
55
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
24 T-SKY
GARAGE OPERATOR
VOLT
1
Torque 1000 N
Features:
• residential use
• for sectional and up-and-over garage doors
• torque 1000 N
• low voltage DC garage door opener
• optical encoder technology
• electronic control unit with built-in radio receiver
• built-in battery charger
• manual release mechanism
• courtesy light with time delay
Pros:
• higher torque
• ideal for large garage doors
• intensive use
• motor head turns 90° left/right for installation
in shorter garages
• pre-programmed electronic control unit
• exclusive “push & flip” opening system
For installation in limited
spaces, T-SKY head
unit can be rotated 90
degrees clockwise or
counterclockwise.
Technical features
Drive system
Power supply
Motor power supply
Open circuit voltage
Power rating
Speed maneuver
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
Traction Power
Electornic control unit
T-SKYKIT1C
T-SKYKIT1B
chain
belt
230 V AC (50 - 60 Hz)
24 V DC
1,5 A
300 W
0,185 m/s
100 %
12 Nm
-20° C ÷ +55° C
IP 40
1000 N
K691
The new, user-friendly
manual release
mechanism allows to
hook the garage door at
any position
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
56
M A D E I N I T A LY
T-SKYKIT1B
DC garage door opener complete with one-piece 3 m belt drive rail and one
250T-4RP transmitter
270
T-SKYKIT1B3
DC garage door opener complete with three-piece (3 x 1 m) belt drive rail and
one 250T-4RP transmitter
148
427
T-SKYKIT1C
DC garage door opener complete with one-piece 3 m chain drive rail and one
250T-4RP transmitter
T-SKYKIT1C3
DC garage door opener complete with three-piece (3 x 1 m) chain drive rail and
one 250T-4RP transmitter
Accessories included in the kit:
Belt or chain
drive rail
250T-4RP
Transmitter
Accessories
750BATTSKY
Back-up battery kit, 1,2 Ah
and cable
900LAMP5
24 V flashing light
150SE
External emergency release
900OPTIC
Set of safety photocells
100BANT
Adapter for up-and-over
garage doors
100PROC
1 m extension chain drive
rail
100BINSUPP
Set of additional fixing
brackets
100PROB
1 m extension belt drive rail
150SETSKY
External emergency release
for sectional door
M-030LAMP024LED
24V LED lamp
57
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
12 SPIN
GARAGE OPERATOR
VOLT
12
For up-and-over garage
doors
100SPIN12QR
DC garage door opener with encoder, complete
with built-in electronic control unit and 433,92 MHz
two-channel radio receiver.
100SPIN12
DC garage door opener with encoder.
Features:
• residential / apartment building use
• low voltage DC motor
• optical encoder technology
• electronic control unit with built-in radio receiver
• manual release mechanism
• courtesy light with time delay
• built-in open / close buttons (SPIN12QR)
Pros:
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage thanks to the
optional backup battery
• fast operating speed
• intensive use
• soft stop
• irreversible gate operator
• small and compact to grant the widest opening
of the garage door
The door opener with
built-in electronic
control unit features two
pushbuttons to open /
close the door from the
inside, as well as an
efficient courtesy light
with time delay.
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
Max. door surface
Electornic control unit
SPIN12
SPIN12QR
230 V AC (50 - 60 Hz)
18 V DC
0,9 A
200 W
11 sec.
100 %
295 Nm
-20° C ÷ +55° C
IP 40
10 m²
K996M
Quick and easy
installation thanks to
the built-in electronic
control unit (no visible
wires).
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
58
M A D E I N I T A LY
Accessories
150KITB1SP
Central mount (single
opener) installation kit (no
welding required)
150KITBCL1
2 x side mount (twin
openers) telescopic curved
arms with brackets
150KITB1S
Central mount (single
opener) installation kit (1 x
L16S, 2 x BD, 2 x T1)
150KITBC
2 x central mount (single
opener) telescopic curved
arms with brackets
150KITB1D1S
Side mount (twin openers)
installation kit (2 x L16S, 2
x BDL1)
150KITCPB
Set of 6 counterweights (1,7
kg each)
150SESP
External emergency release
device with cable.
200K996M
Electronic control unit for one
or two DC up-and-over garage
door openers with soft-stop,
built-in 433,92 MHz radio
receiver and enclosure
150SESPIN
External emergency key
release device
200BATT
12 V back-up battery, 7,2 Ah
150KITBDL1
2 x side mount (twin
openers) telescopic arms
with brackets
750SCB12C
Battery charger (optional)
150KITBD
2 x central mount (single
opener) telescopic arms
with brackets
M-030Z15G000
Pedestrian door microswitch
150T1
1500 mm long 1” pipe with
bushing
900KICM120
Safety edge l=1,2 m
150T2
2000 mm long 1” pipe with
bushing
900KICM180
Safety edge l=1,8 m
150L16S
Support, 1600 mm
900KONT120
Controlled safety edge l=1,2
m (8,2 kΩ)
150L25S
Support, 2500 mm
900KONT180
Controlled safety edge l=1,8
m (8,2 kΩ)
C-TARG
Aluminium CE Mark Label,
self adhesive
59
600
90
107,6
100
SMALL AND COMPACT
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
GARAGE OPERATOR
SPIN
QRE/F
For up-and-over garage
doors
100SPINQRE
230 V garage door opener with limit switch and
encoder complete with built-in electronic control
unit and 433,92 MHz two-channel radio receiver.
100SPINF
230 V garage door opener with limit switch.
Features:
• residential use
• 230 V motor
• built-in limit switch
• electronic control unit with built-in radio receiver
• manual release mechanism
• courtesy light with time delay
• built-in open / close buttons (SPINQRF)
Pros:
• semi-intensive use
• higher torque and power
• encoder for obstacle detection and crush prevention
• irreversible gate operator
• small and compact to grant the widest opening
of the garage door
The door opener with
built-in electronic
control unit features two
pushbuttons to open /
close the door from the
inside, as well as an
efficient courtesy light
with time delay.
User-friendly manual
release. The installation
of the external
emergency release
device is recommended
when the main garage
door is the only garage
exit
Technical features
Power supply
Motor power supply
Absorption
Power rating
Opening time 90°
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
Max. door surface
Electornic control unit
SPINF
SPINQRE
230 V AC (50 - 60 Hz)
230 V AC
2A
370 W
21 sec.
30 %
490 Nm
-20° C ÷ +55° C
150° C
IP 40
10 m²
K892M
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
60
M A D E I N I T A LY
Accessories
150KITB1SP
Central mount (single
opener) installation kit (no
welding required)
150KITBCL1
2 x side mount (twin
openers) telescopic curved
arms with brackets
150KITB1S
Central mount (single
opener) installation kit (1 x
L16S, 2 x BD, 2 x T1)
150KITBC
2 x central mount (single
opener) telescopic curved
arms with brackets
150KITB1D1S
Side mount (twin openers)
installation kit (2 x L16S, 2
x BDL1)
150KITCPB
Set of 6 counterweights (1,7
kg each)
150SESP
External emergency release
device with cable.
200K892M
Electronic control unit for one or
two 230 V up-and-over garage
door openers with soft-stop,
built-in 433,92 MHz radio
receiver and enclosure
150SESPIN
External emergency key
release device
M-030Z15G000
Pedestrian door microswitch
150KITBDL1
2 x side mount (twin
openers) telescopic arms
with brackets
900KICM120
Safety edge l=1,2 m
150KITBD
2 x central mount (single
opener) telescopic arms
with brackets
900KICM180
Safety edge l=1,8 m
150T1
1500 mm long 1” pipe with
bushing
900KONT120
Controlled safety edge l=1,2
m (8,2 kΩ)
150T2
2000 mm long 1” pipe with
bushing
900KONT180
Controlled safety edge l=1,8
m (8,2 kΩ)
150L16S
Support, 1600 mm
C-TARG
Aluminium CE Mark Label,
self adhesive
150L25S
Support, 2500 mm
61
600
90
107,6
100
SMALL AND COMPACT
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
COMMERCIAL FOLDING
BIUNO-BT
BIUNO
INDY
F10 / F15
MADE IN ITALY
12 BIUNO-BT
INDUSTRIAL OPERATOR
VOLT
For door leaves up to 1,2 m
650BIUNO-BT Rh/Lh
DC electromechanical folding door irreversible
operator with encoder. Maximum leaf 1,2 m, complete with mounting bracket (telescopic arm to be
ordered separately).
Features:
• commercial use
• low voltage DC motor
• optical encoder technology
Pros:
• obstacle detection and crush prevention
• in accordance with EN 12445-12453 standards
• works even during power outage thanks to the
optional backup battery
• fast operating speed
• intensive use
• soft start and soft stop
• irreversible door operator
• adaptive controller for the different seal problems
Technical features
Power supply
Motor power supply
Open circuit voltage
Power rating
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
Opening time 90°
Reduction ratio
Max. wing widht
BIUNO-BT
230 V AC (50 - 60 Hz)
18 V DC
1A
250 W
100 %
395 Nm
-20° C ÷ +55° C
IP 40
16 sec.
1/672
1,2 m
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
64
M A D E I N I T A LY
Accessories
650BTB1
Telescopic arm for BIUNO
operator
300PPI
Heavy duty pushbutton
panell
750D749MA
Electronic control unit for one
or two DC gate operators with
encoder, complete with 433,92
Mhz rolling code radio receiver,
battery charger, transformer and
enclosure
750D749MA-R
Electronic control unit for one or
two 28V DC gate operators with
encoder, for fast opening/closing
(11 sec.), complete with 433,92
Mhz rolling code radio receiver,
battery charger, transformer and
enclosure
750COP2
Control unit box cover with
2 command buttons
750COP3
Control unit box cover with
3 command buttons
650SVB1
External release with knob
550MS
Release system
200BATT
12 V back-up battery, 7,2 Ah
con cavo
M-030KITKB20
Battery cables kit (20 pcs)
C-CRT
Warning signal
C-TARG
Aluminium CE Mark Label,
self adhesive
120
118
150
430
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
65
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
230
VOLT
INDUSTRIAL OPERATOR
BIUNO
For door leaves up to 1,2 m
650BIUNO Rh/Lh
230V electromechanical folding door irreversible operator. Maximum leaf 1,2 m, complete with
mounting bracket (telescopic arm to be ordered
separately).
Features:
• commercial use
• built-in electrical limit switches
Pros:
• semi-intensive use
• high torque and power
• strong telescopic arm
Technical features
Power supply
Motor power supply
Absorption
Power rating
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
Opening time 90°
Reduction ratio
Max. wing widht
BIUNO
230 V AC (50 - 60 Hz)
230 V AC
1A
190 W
50 %
350 Nm
-20° C ÷ +55° C
150° C
IP 40
19 sec.
1/672
1,2 m
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
66
M A D E I N I T A LY
120
118
Accessories
650BTB1
Telescopic arm for BIUNO
operator
750D760M
Electronic control unit for
one or two 230 V gate
operators with soft-stop and
built-in 433,92 MHz radio
receiver, complete with
enclosure
750COP2
Control unit box cover with
2 command buttons
750COP3
Control unit box cover with
3 command buttons
300PPI
Heavy duty pushbutton
panel
550MS
Release mechanism
650SVB1
External release with knob
C-TARG
Aluminium CE Mark Label,
self adhesive
150
430
C-CRT
Warning signal
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
67
230/400
VOLT
INDUSTRIAL OPERATOR
INDY
For industrial doors
650INDY
230 Volt side mounted operator, 50 Nm, for rolling
shutters and industrial sectional doors with rotating
shaft and manual emergency chain operations.
650INDYT
400 Volt side mounted operator, 100 Nm, for rolling shutters and industrial sectional doors with
rotating shaft and manual emergency chain operations.
Features:
• electromecanic irriverible operator
• manual emergency chain
• built-in electric limit switch simple and precise to
set
• oil bath motor with hardened steel and bronze
gears for high performances and durability
Technical features
Power supply
Motor power supply
Absorption
Power rating
Duty cycle
Max. torque
Operating temperature
Speed output shaft
Degree of protection
Ø output shaft
68
INDY
230 V AC (50 Hz)
230 V AC
3,3 A
600 W
15 %
50 Nm
-20° C ÷ +55° C
22 rpm
IP 54
25,4 mm
INDYT
400 V AC (50 Hz)
400 V AC
2,3 A
900 W
25 %
100 Nm
-20° C ÷ +55° C
22 rpm
IP 54
25,4 mm
Accessories
600D703
230/400 V electronic control
unit for one gate operator
with electrical brake
300PPI
Heavy duty pushbutton
panel
750COP2
Control unit box cover with
2 command buttons
750COP3
Control unit box cover with
3 command buttons
250RXSM2
Self-learning, two-channel,
433,92 MHz plug-in radio
receiver. Accepts up to 14
rolling code transmitters
or unlimited dipswitch
transmitters
250SM126
Memory card for 126 radio
codes
250SM254
Memory card for 254 radio
codes
250SM1022
Memory card for 1022 radio
codes
C-CRT
Warning signal
C-TARG
Aluminium CE mark label,
self adhesive
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
69
230/400
VOLT
GATE OPERATOR
F10
For sliding or folding doors up
to 1500 kg
500F10CA1
230 V chain drive sliding or folding door operator,
complete with limit switch. Maximum door weight
1000 kg.
500F15C1
400 V chain drive sliding or folding door operator,
complete with limit switch. Maximum door weight
1500 kg.
Features:
• commercial use
• for folding or sliding doors up to 1500 kg
• irreversible motor
Pros:
• semi-intensive use
• high torque and power
• irreversible door operator
• ideal for wide hall openings
(multi-leaf folding doors)
• quick and easy installation thanks to the built-in
limit switch (F10CA1 / F15CA1)
• version with separated limit switch (F10CA / F15CA)
recommended where a higher precision is required
Technical features
Power supply
Motor power supply
Absorption
Power rating
Duty cycle
Max. torque
Operating temperature
Motor thermal protection
Degree of protection
Output speed
Max. gate leaf weight
F10CA1
230 V AC (50 - 60 Hz)
230 V AC
3,9 A
720 W
50 %
39 Nm
-20° C ÷ +55° C
150° C
IP 40
10,3 m/min
<1000 kg
F15C1
400 V AC (50 - 60 Hz)
400 V AC
3,25 A
1800 W
55 %
60 Nm
-20° C ÷ +55° C
150° C
IP 40
10,3 m/min
<1500 kg
Chain transmission
SPEED2CTN can
directly be installed on
the door thanks to the
chain transmission
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
70
M A D E I N I T A LY
Accessories
600D703
230/400 V electronic control
unit for one gate operator
with electrical brake
M-03083850LR
Limit switch
750COP2
Control unit box cover with
2 command buttons
750COP3
Control unit box cover with
3 command buttons
550TEN
Chain stretcher
550MS Release system
550CAT5
1/2" x 5/16" chain (5 m)
800B600100
F10/F15 Mounting plate
300PPI
Heavy duty pushbutton
panel
C-TARG
Aluminium CE mark label,
self adhesive
C-CRT
Warning signal
250RXSM2
Self-learning, two-channel,
433,92 MHz plug-in radio
receiver. Accepts up to 14 rolling
code transmitters or unlimited
dipswitch transmitters
250SM126
Memory card for 126 radio
codes
250SM254
Memory card for 254 radio
codes
320
200
210
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
71
AUTOMATIC DOORS
BRINK
T-LINE
MADE IN ITALY
DOOR OPENER
BRINK
For doors up to 130 kg
10DOORBRINK
Single leaf swing door opener, powered opening,
powered closing, wind stop. Max. leaf 130 kg and
1000 mm.
10DOORBRINK-S
Single leaf swing door opener, powered opening,
spring closing, wind stop. Max. leaf 130 kg and
1000 mm.
10DOORBRINK-SL
Single leaf swing door opener, powered opening,
spring closing, wind stop. Max. leaf 100 kg and
1000 mm.
Features:
• commercial use
• max. opening 95°
• for door panels up to 130 kg and 1000 mm
• built-in electronic control unit
• in or out swing
• single or double swing leaf installation
Pros:
• intensive use
• ideal for offices, supermarkets, hospitals and
public entrances
• can automate most swing doors, new or existing
• quick and easy installation
• react immediately to any obstacle
• wind stop: resists wind pressure
• high reliability and smooth operation
Technical features
Power supply
Motor power supply
Absorbed power
Opening speed
Closing speed
Duty cycle
Operating temperature
Degree of protection
Max. opening
Max. gate leaf weight
BRINK / BRINK-S
115/230 V AC (50 - 60 Hz)
24 V DC with encoder
120 W
4 - 12 sec.
5 - 15 sec.
100 %
-20° C ÷ +50° C
IP 32
95°
130 kg
BRINK-SL
115/230 V AC (50 - 60 Hz)
24 V DC withw encoder
120 W
4 - 12 sec.
5 - 15 sec.
100 %
-20° C ÷ +50° C
IP 32
95°
100 kg
Compact and reliable
operator
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
74
M A D E I N I T A LY
Accessories
S-10DOORBST
Track (PULL operation)
Lenght of
door (mm)
Max weight
(Kg)
S-10DOORBSS
Scissor arm (PUSH operation)
Lenght of
door (mm)
Max weight
(Kg)
700
750
800
850
900
950
1000
130
124
118
113
108
104
100
800
850
900
950
1000
92
89
85
83
80
S-10DOORSS340
Safety sensor
for obstacle
detection
S-10DOORRAD2
Radar for activation
and safety
S-10DOORPROGT
Programming keypad
S-10DOORRAD
Active infrared motion
detector
S-10DOORSELFB
Mechanical program switch for
BRINK
S-10DOORRADM
Microwave radar detector,
unidirectional, scanned
area 4 m, turtle mode for
enhanced pedestrian safety
S-10DOORSELFBC
Mechanical key switch for
BRINK
S-10DOORTL
Microwave, hygienic,
touchless, automatic door
activation switch, scanned
area 4 m, 3 different
faceplate included
S-10DOORKIT2BRK
Aluminium cover for two
BRINK openers, complete
with cable for Master/Slave
connection
550
75
110
120
DOOR OPENER
T-LINE
Features:
• commercial use
• emergency operation with integrated backup
battery pack
• suitable for single leaf or bi-parting sliding doors
• max. door panel weight 1 x 150 kg or 2 x 130 kg
• max. clear passage width 3100 mm
• control unit built-in
Pros:
• intensive use
• ideal for offices, supermarkets, hospitals and
busy environments
• obstacle detection and crush prevention
• large vertical (20 mm) and horizontal (36 mm)
leaf adjustment range
• fast, trouble-free, installation at the job site thanks
to the preassembled package
Noiseless and long life
operation thanks to a
new reduction profile
Technical features
Power supply
Motor power supply
Absorbed power
Opening speed
Closing speed
Duty cycle
Operating temperature
Degree of protection
Max. gate leaf weight
T-LINE
230 V AC (50 - 60 Hz)
48 V DC with encoder
120 W
max. 70 cm/sec. for wing
max. 50 cm/sec. for wing
100 %
-20° C ÷ +50° C
IP 22
1 wing: 150 kg
2 wings: 130 kg
Strong and reliable
operator
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
76
M A D E I N I T A LY
SINGLE LEAF AUTOMATIC SLINDING DOOR MAX 150 KG:
10T-LINE1.195
10T-LINE1.435
10T-LINE1.215
10T-LINE1.455
10T-LINE1.235
10T-LINE1.475
10T-LINE1.255
10T-LINE1.495
10T-LINE1.275
10T-LINE1.515
10T-LINE1.295
10T-LINE1.535
10T-LINE1.315
10T-LINE1.555
10T-LINE1.335
10T-LINE1.575
10T-LINE1.355
10T-LINE1.595
10T-LINE1.375
10T-LINE1.615
10T-LINE1.395
10T-LINE1.635
Single leaf sliding door opener. Maximum profile length 1950 mm
Single leaf sliding door opener. Maximum profile length 2150 mm
Single leaf sliding door opener. Maximum profile length 2350 mm
Single leaf sliding door opener. Maximum profile length 2550 mm
Single leaf sliding door opener. Maximum profile length 2750 mm
Single leaf sliding door opener. Maximum profile length 2950 mm
Single leaf sliding door opener. Maximum profile length 3150 mm
Single leaf sliding door opener. Maximum profile length 3350 mm
Single leaf sliding door opener. Maximum profile length 3550 mm
Single leaf sliding door opener. Maximum profile length 3750 mm
Single leaf sliding door opener. Maximum profile length 3950 mm
Single leaf sliding door opener. Maximum profile length 4350 mm
Single leaf sliding door opener. Maximum profile length 4550 mm
Single leaf sliding door opener. Maximum profile length 4750 mm
Single leaf sliding door opener. Maximum profile length 4950 mm
Single leaf sliding door opener. Maximum profile length 5150 mm
Single leaf sliding door opener. Maximum profile length 5350 mm
Single leaf sliding door opener. Maximum profile length 5550 mm
Single leaf sliding door opener. Maximum profile length 5750 mm
Single leaf sliding door opener. Maximum profile length 5950 mm
Single leaf sliding door opener. Maximum profile length 6150 mm
Single leaf sliding door opener. Maximum profile length 6350 mm
10T-LINE1.415
Single leaf sliding door opener. Maximum profile length 4150 mm
77
DOOR OPENER
T-LINE
DOUBLE LEAF AUTOMATIC SLIDING DOOR MAX 130+130 KG:
10T-LINE2.215
10T-LINE2.455
10T-LINE2.235
10T-LINE2.475
10T-LINE2.255
10T-LINE2.495
10T-LINE2.275
10T-LINE2.515
10T-LINE2.295
10T-LINE2.535
10T-LINE2.315
10T-LINE2.555
10T-LINE2.335
10T-LINE2.575
10T-LINE2.355
10T-LINE2.595
10T-LINE2.375
10T-LINE2.615
10T-LINE2.395
10T-LINE2.635
Double leaf sliding door opener. Maximum profile length 2150 mm
Double leaf sliding door opener. Maximum profile length 4550 mm
Double leaf sliding door opener. Maximum profile length 2350 mm
Double leaf sliding door opener. Maximum profile length 4750 mm
Double leaf sliding door opener. Maximum profile length 2550 mm
Double leaf sliding door opener. Maximum profile length 4950 mm
Double leaf sliding door opener. Maximum profile length 2750 mm
Double leaf sliding door opener. Maximum profile length 5150 mm
Double leaf sliding door opener. Maximum profile length 2950 mm
Double leaf sliding door opener. Maximum profile length 5350 mm
Double leaf sliding door opener. Maximum profile length 3150 mm
Double leaf sliding door opener. Maximum profile length 5550 mm
Double leaf sliding door opener. Maximum profile length 3350 mm
Double leaf sliding door opener. Maximum profile length 5750 mm
Double leaf sliding door opener. Maximum profile length 3550 mm
Double leaf sliding door opener. Maximum profile length 5950 mm
Double leaf sliding door opener. Maximum profile length 3750 mm
Double leaf sliding door opener. Maximum profile length 6150 mm
Double leaf sliding door opener. Maximum profile length 3950 mm
Double leaf sliding door opener. Maximum profile length 6350 mm
10T-LINE2.415
Double leaf sliding door opener. Maximum profile length 4150 mm
10T-LINE2.435
Double leaf sliding door opener. Maximum profile length 4350 mm
78
M A D E I N I T A LY
S-10DOORRAD
Active infrared motion
detector
S-10DOORCRIS15
Aluminium clamp for frameless
glass panels (thickness 10
mm), length 1,5 m
S-10DOORRAD2
Radar for activation and
safety
S-10DOORRAD/STA
Radar for active infrareds.
Narrow field for lateral security
79
120
87
ANTI-DERAILMENT DEVICES
S-10DOORCRIS10
Aluminium clamp for frameless
glass panels (thickness 10 mm),
length 1 m
ANTI-DERAILMENT DEVICES
S-10DOORRADMU
Microwave radar detector,
unidirectional, scanned
area 4 m
SAFETY ELECTRO-BLOCKING DEVICE
S-10T-LINEBATT
Back up battery kit
ANTI-DERAILMENT DEVICES
S-10DOORRADM
Microwave radar detector,
turtle mode for enhanced
pedestrian safety
ALLUMINIUM BEAM
S-10DOORTL
Microwave, hygienic, touchless,
automatic door activation
switch, scanned area 4 m, 3
different faceplate included
ANTI-DERAILMENT DEVICES
S-10T-LINEBLOCF
Electromechanical lock with
side handle release
CONTROL BOARD
S-10T-LINETD
Digital key pad
MOTOR WHIT ENCODER
S-10T-LINEBLOCL
Electromechanical lock with
center release
ALUMINIUM BEAM COVER
S-10T-LINESELF
Function selector
157.5
105
S-10DOORFOTOG
Pair of photocells
SOUND CONTROL GASKET
TRACK
SIDE HANDLE UNLOCKING DEVICE
Accessories
DOOR OPENER
T-LINE
Unassembled openers for
sliding doors
Features:
• door opener components supplied as a kit
to be completed with structural parts
• commercial use
• emergency operation with integrated backup
• battery pack
• suitable for single leaf or bi-parting sliding doors
Pros:
• competitive costs
• increased flexibility
• eliminates the need to stock complete door
packages
• logistics optimization
• prompt delivery to the end-user of a customized
door package
T-LINEKIT1.150
Single leaf sliding door opener (max 150 kg)
T-LINEKIT2.130
Double leaf sliding door opener (max 130 + 130 kg)
A
D
C
B
E
A) S-10T-LINETRA65
T-Line support beam L 6500 mm
B) S-10T-LINECAR65
T-Line front cover L 6500 mm
C) S-10T-LINEROT65
T-Line track L 6500 mm.
D) S-10T-LINEANK65
T-Line anchor template L 6500 mm
E) S-10T-LINEANR
Anti-vibration gasket for T-Line track. (200 m per pkg)
M-0300000380
Extruded rubber (100 m per pkg)
S-10DOORCING
Traction belt (50 m per pkg)
80
FRAME BREAK-OUT
SYSTEM FOR
M A D E I N I T A LY
SLIDING DOORS
The break-out system is the best solution for escape routes.
The system enables sliding and sidelight panels to be swung
out in an emergency situation by pushing the door.
S-10DOORSF1M
Configuration: single sliding with fixed sidelight panels. Frame break-out system
composed of 1 x break-out kit, 1 x upper profile 1300 mm, 1 x floor track 1400
mm. Specify right or left-hand (consult TAU for additional information)
Additional components (to be purchased separately):
S-10DOORFOTOGAdditional set of safety photocells
(if a set of DOORFOTO1 is already installed)
S-10DOORSTF Metal housing for DOORFOTOG
S-10DOORSF2M
Configuration: bi-parting with fixed sidelight panels. Frame break-out system composed
of 2 x break-out kits, 2 x upper profiles 1300 mm, 2 x floor tracks 1400 mm
Additional components (to be purchased separately):
S-10DOORFOTOGAdditional set of safety photocells
(if a set of DOORFOTO1 is already installed)
S-10DOORSTF Metal housing for DOORFOTOG
S-10DOORSF2MF
Configuration: single sliding with break-out sidelight panel. Frame break-out
system composed of 1 x break-out kit, 1 x upper profile 1300 mm, 1 x floor track
1400 mm, 1 x ball-lock, 1 x magnetic contact Specify right or left-hand (consult
TAU for additional information)
Additional components (to be purchased separately):
S-10DOORSQ2 S-10DOORCRN2
S-10DOORGP S-10DOORGPS Lock brackets to prevent opening from the outside (2 brackets per pkg)
Hinges (2 hinges per pkg)
Photocell foldaway case
Photocell foldaway case
S-10DOORSF4MF
Configuration: bi-parting with break-out sidelight panels. Frame break-out
system composed of 2 x break-out kits, 2 x upper profiles 1300 mm, 2 x floor
tracks 1400 mm, 2 x ball-locks, 2 x magnetic contact
Additional components (to be purchased separately):
S-10DOORSQ4 S-10DOORCRN4 S-10DOORGP2 S-10DOORGPS2 Lock brackets to prevent opening from the outside(4 brackets per pkg)
Hinges (2 hinges per pkg)
Lock brackets to prevent opening from the outside (2 brackets per pkg)
Hinges (2 hinges per pkg)
81
AUTOMATIC BARRIERS
LUXE
RBLO
PARK
T-STOP
MADE IN ITALY
12/230
VOLT
AUTOMATIC BARRIER
RBLO
For barrier boom length up
to 3 - 4 m
800RBLO
Rh/Lh
DC automatic barrier, painted steel cabinet, for
booms up to 4 m, complete with built-in electronic
control board, radio receiver and battery charger.
Boom and spring must be ordered separately.
800RBLO-E
Rh/Lh
Barrier Kit 230 V with 3 m boom included, painted cabinet, complete with electric control board
with radio receiver 433,92 Mhz, rolling code.
Spring included.
Features:
• residential / commercial use
• for booms up to 3 or 4 m
• opening time 2,2 seconds
Pros:
• intensive use
• fast opening
• ideal for busy entrances and car parks
• possibility to install photocells and flashing lights
directly on the barrier cabinet
Technical features
Power supply
Motor power supply
Absorption
Power rating
Min. opening time 90°
Duty cycle
Max. torque
Operating temperature
Degree of protection
Max width of passage clearance
Electornic control unit
RBLO
230 V AC (50 - 60 Hz)
18 V DC
1A
250 W
2,2 sec.
100 %
155 Nm
-20° C ÷ +55° C
IP 54
4m
K206MA
RBLO-E
230V AC (50 - 60 Hz)
230V AC
1,2 A
180 W
2,2 sec.
120/ora
160 Nm
-20° C ÷ +55° C
IP 54
3m
K101M
Easy-to-operate,
intuitive manual release
with key lock for the
less skilled users
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
84
M A D E I N I T A LY
Accessories
M-06000B3000
Spring wire dia. 4,2 mm, load 50
kg (light green)
M-0600000028
Spring wire dia. 5,2 mm, load
90 kg (green)
M-060B3060FP
Spring wire dia. 6,2 mm, load
135 kg (Blue)
M-060CITY0FP
Spring wire dia. 7 mm, load 155
kg (red)
800AFI4 Anodized aluminium round
section boom, 4 m, complete
with adhesive refractor strips
800ABT1
Anodized aluminium round
section telescopic boom, 3 m,
c/w adhesive refractor strips
4449,5 (RBLO)
3449,5 (RBLO-E)
215,7
max. 4000 mm (RBLO)
max. 3000 mm (RBLO-E)
1328
1135
340,5
200
320
938
RBLO / RBLO-E
800CPRBL
Counterplate (RBLO / RBLO-X)
200BATT
12 V back-up battery, 7,2 Ah
with cable
800AT
Boom support
M-030KITKB20
Battery cables kit (20 pcs)
900T-COMM
Interface to connect two control
units as Master/Slave (Activation
though TAUPROG handheld
device). Only for RBLO
900TOWERF
Photocells mounting post
SPRING
900LAMP4
12 V flashing light
(RBLO)
900OPTIC
Set of safety photocells
900LAMP3
230 V flashing light
(RBLO-E)
250SM126
Memory card for 126 radio
codes (RBLO)
300SA1
Magnetic loop detector
250SM254
Memory card for 254 radio
codes (RBLO)
800SFA
Boom break-out system
250SM1022
Memory card for 1022 radio
codes (RBLO)
A)
M-06000B3000 (ø 4,2 mm)
Color: Light green RAL 6019
B)
M-0600000028 (ø 5,2 mm)
Color: Green RAL 6002
C)
M-060B3060FP (ø 6,2 mm)
Color: Blue RAL 5003
D)*
M-060CITY0FP (ø 7 mm)
Color: Red RAL 3000
BAR AND ACCESSORIES
BAR LENGHT
2m
2,5 m
800AFI4 (RBLO) / 800ABT1 (RBLO-E)
A
A
800AFI4 (RBLO) / 800ABT1 (RBLO-E) + 800AT
A
A
3m
3,5 m
4m
B
C
D
The RBLO-E barrier is supplied as standard with the “B” spring (M-0600000028), suitable for booms
up to 3 m. For different boom lengths or when further optionals are to be installed please order a
different spring as per enclosed chart.
For boom lengths equal or greater than 3 mt. it MUST USE (compulsory) the ground boom support or
the pendulum support.
85
Right-hand version
Left-hand version
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
12 RBLO-X
AUTOMATIC BARRIER
VOLT
For booms up to 4 m
800RBLO-X
Rh/Lh
DC automatic barrier, painted steel cabinet, for elliptical
booms up to 4 m, complete with built-in electronic control board, radio receiver and battery charger. Boom,
spring and led lights must be ordered separately.
800RBLO-IX
Rh/Lh
DC automatic barrier, stainless steel cabinet, for
elliptical booms up to 4 m, complete with built-in
electronic control board, radio receiver and battery
charger. Boom, spring and led lights must be ordered separately.
Features:
• residential / commercial use
• for booms up to 4 m
• optical encoder technology
Pros:
• intensive use
• fast opening
• ideal for busy entrances and car parks
• possibility to install photocells and flashing lights
directly on the barrier cabinet
Technical features
Power supply
Motor power supply
Absorption
Power rating
Min. opening time 90°
Duty cycle
Max. torque
Operating temperature
Degree of protection
Max width of passage clearance
Electornic control unit
RBLO-X / RBLO-IX
230 V AC (50 - 60 Hz)
18 V DC
1A
250 W
2,2 sec.
100 %
155 Nm
-20° C ÷ +55° C
IP 54
4m
K206MA
Easy-to-operate,
intuitive manual release
with key lock for the
less skilled users
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
86
M A D E I N I T A LY
Accessories
M-06000B3000
Spring wire dia. 4,2 mm, load 50
kg (light green)
M-060CITY0FP
Spring wire dia. 7 mm, load 155
kg (red)
M-060B3060FP
Spring wire dia. 6,2 mm, load
135 kg (Blue)
M-060LUXE000
Spring wire dia. 9 mm, load 335
kg (yellow)
800AE4
Elliptical white painted aluminium
boom, 4 m. Flashing LED lights and
rubber bead to be ordered separately
800AE3
Elliptical white painted aluminium
boom, 3 m. Flashing LED lights and
rubber bead to be ordered separately
SPRING
800LA4
LED flashing lights for LUXE
elliptical boom, single piece
8m long
800PG4
4 m rubber bead for elliptical
boom
800AE2
Elliptical white painted aluminium
boom, 2 m. Flashing LED lights and
rubber bead to be ordered separately
200BATT
12 V back-up battery, 7,2 Ah
800CPRBL
Counterplate (RBLO)
M-030KITKB20
Battery cables kit (20 pcs)
800AT
Boom support
300SA1
Magnetic loop detector
800ATE
Boom support with
electromagnet
900T-COMM
RS485 Serial Interface to connect two
control units as Master/Slave
(ActivationthoughTAUPROGhandhelddevice)
900TOWERF
Photocells mounting post
250SM126
Memory card for 126 radio
codes
900OPTIC
Set of safety photocells
250SM254
Memory card for 254 radio
codes
900LAMP4
12 V flashing light
250SM1022
Memory card for 1022 radio
codes
800XABTSE
Joint for elliptical boom
(RBLO-X / RBLO-LX)
800XSFA
Boom break-out system
for elliptical boom (RBLO-X)
A)
M-06000B3000 (Ø 4,2 mm)
Color: Light green RAL 6019
B)
M-0600000028 (Ø 5,2 mm)
Color: Green RAL 6002
D)*
M-060CITY0FP (ø 7 mm)
Color: Red RAL 3000
E)
M-060LUXE000 (ø 9 mm)
Color: Yellow RAL 1004
BAR AND ACCESSORIES
C)
2,5 m
800AE
A
A
800AE + 800AT
A
800AE + 800AT + 800XABTSE
-
215,7
1328
max. 3746 mm
1135
328,3
200
320
947
RBLO-X
Right-hand version
Left-hand version
M-060B3060FP (Ø 6,2 mm)
Color: Blue RAL 5003
BAR LENGHT
2m
4189,5
3m
3,5 m
4m
A
C
D
D*
-
E
E
E
* Eyelet in max. load position
* For different boom lengths or when further optionals are to be installed please order a different spring
as per enclosed chart.
For boom lengths equal or greater than 3 mt. it MUST USE (compulsory) the ground boom support or the
pendulum support.
ATTENTION: FOR ELLIPTIC BOOM IS REQUIRED THE RUBBER PROFILE (800PG4 - 800PG8).
87
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
12 RBLO-L
AUTOMATIC BARRIER
VOLT
For barrier boom length up
to 6 m
800RBLO-L
Rh/Lh
DC automatic barrier, painted steel cabinet, for booms up to 6 m, complete with built-in electronic control board, radio receiver and battery charger. Boom
and spring must be ordered separately.
800RBLO-IL Rh/Lh
DC automatic barrier, stinless steel cabinet, for
round tescopic booms up to 6 m, complete with
built-in electronic control board, radio receiver and
battery charger. Boom and spring must be ordered
separately.
Features:
• residential / commercial use
• for booms up to 6 m
• opening time 3,5 seconds
Pros:
• intensive use
• fast opening
• ideal for busy entrances and car parks
• possibility to install photocells and flashing lights
directly on the barrier cabinet
Technical features
Power supply
Motor power supply
Absorption
Power rating
Min. opening time 90°
Duty cycle
Max. torque
Operating temperature
Degree of protection
Max width of passage clearance
Electornic control unit
RBLO-L / RBLO-IL
230 V AC (50 - 60 Hz)
18 V DC
1A
250 W
3,5 sec.
100 %
155 Nm
-20° C ÷ +55° C
IP 54
6m
K206MA
Easy-to-operate,
intuitive manual release
with key lock for the
less skilled users
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
88
M A D E I N I T A LY
Accessories
M-0600000028
Spring wire dia. 5,2 mm, load
90 kg (green)
228,6
M-060CITY0FP
Spring wire dia. 7 mm, load 155
kg (red)
6218,5
1333,5
1143,5
max. 5721 mm
M-060B3060FP
Spring wire dia. 6,2 mm, load
135 kg (Blue)
800ABT2
Anodized aluminium round
section telescopic boom, 6 m,
c/w adhesive refractor strips
350,4
200BATT
12 V back-up battery, 7,2 Ah
with cable
800CPRBLO-L
Counterplate (RBLO-L)
800AT
Boom support
M-030KITKB20
Battery cables kit (20 pcs)
800FPT2
Pendulum boom support
for round boom
900T-COMM
RS485 Serial Interface to
connect two control units
as Master/Slave (Activation
though TAUPROG handheld
device)
900TOWERF
Photocells mounting post
250SM126
Memory card for 126 radio
codes
900OPTIC
Set of safety photocells
250SM254
Memory card for 254 radio
codes
900LAMP4
12 V flashing light
250SM1022
Memory card for 1022 radio
codes
210
370
937
RBLO-L
Right-hand version
Left-hand version
300SA1
Magnetic loop detector
SPRING
C)
M-060B3060FP (ø 6,2 mm)
Color: Blue RAL 5003
BAR AND ACCESSORIES
B)
M-0600000028 (ø 5,2 mm)
Color: Green RAL 6002
D)*
M-060CITY0FP (ø 7 mm)
Color: Red RAL 3000
BAR LENGHT
4m
4,5 m
5m
5,5 m
6m
800ABT2 + 800AT
B3
C3
C2
C1
D1
800ABT2 + 800FPT2
C3
C2
C1
D1
D1
1
2
3
Eyelet in the max. load position.
Eyelet in the med. load position.
Eyelet in the min. load position.
For boom lengths equal or greater than 5 mt. it MUST USE (compulsory) the ground boom support or
the pendulum support.
89
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
12 RBLO-LX
AUTOMATIC BARRIER
VOLT
For booms up to 5 m
800RBLO-LX Rh/Lh
DC automatic barrier, painted steel cabinet, for elliptical booms up to 5 m, complete with built-in electronic
control board, radio receiver and battery charger. Boom,
spring and led lights must be ordered separately.
800RBLO-ILX
Rh/Lh
DC automatic barrier, stainless steel cabinet, for elliptical booms up to 5 m, complete with built-in electronic control board, radio receiver and battery charger. Boom, spring and led lights must be ordered
separately.
Features:
• residential / commercial use
• for booms up to 5 m
• optical encoder technology
• min. opening time 3,5 sec.
Pros:
• intensive use
• fast opening
• ideal for busy entrances and car parks
• possibility to install photocells and flashing lights
directly on the barrier cabinet
Technical features
Power supply
Motor power supply
Absorption
Power rating
Min. opening time 90°
Duty cycle
Max. torque
Operating temperature
Degree of protection
Max width of passage clearance
Electornic control unit
RBLO-LX / RBLO-ILX
230 V AC (50 - 60 Hz)
18 V DC
1A
250 W
3,5 sec.
100 %
155 Nm
-20° C ÷ +55° C
IP 54
5m
K206MA
Easy-to-operate,
intuitive manual release
with key lock for the
less skilled users
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
90
M A D E I N I T A LY
Accessories
M-0600000028
Spring wire dia. 5,2 mm, load
90 kg (green)
M-060CITY0FP
Spring wire dia. 7 mm, load 155
kg (red)
M-060B3060FP
Spring wire dia. 6,2 mm, load
135 kg (Blue)
M-060CITY0F8
Spring wire dia. 7 mm,
load 290 kg (black)
800AE4
Elliptical white painted aluminium
boom, 4 m. Flashing LED lights and
rubber bead to be ordered separately
800AE3
Elliptical white painted aluminium
boom, 3 m. Flashing LED lights and
rubber bead to be ordered separately
800AE5
Elliptical white painted aluminium
boom, 5 m. Flashing LED lights and
rubber bead to be ordered separately
800AE2
Elliptical white painted aluminium
boom, 2 m. Flashing LED lights and
rubber bead to be ordered separately
800LA8
LED flashing lights for LUXE
elliptical boom, double piece 8+8
m long
800RA
Reinforcement insert for elliptical
boom longer than 5m
800LARG4
LED flashing light (red&green),
single piece 4m long
200BATT
12 V back-up battery, 7,2 Ah
1333,5
900T-COMM
RS485 Serial Interface to
connect two control units as
Master/Slave (Activation though
TAUPROG handheld device)
800CPRBLO-L
Counterplate (RBLO-L)
800AT
Boom support
345
210
370
947
RBLO-LX
Right-hand version
Left-hand version
250SM254
Memory card for 254 radio
codes
800ATE
Boom support with
electromagnet
800FPL
Pendulum boom support
800GA2
Aluminium bottom skirt
800PGA2
Aluminium bottom skirt
extension
B)
M-0600000028 (Ø 5,2 mm)
Color: Green RAL 6002
C)
D)*
M-060CITY0FP (ø 7 mm)
Color: Red RAL 3000
F)*
BAR AND ACCESSORIES
1143,5
max. 4719 mm
M-030KITKB20
Battery cables kit (20 pcs)
800PG8
8m rubber bead for elliptical
boom
SPRING
228,6
5213,5
M-060B3060FP (Ø 6,2 mm)
Color: Blue RAL 5003
M-060CITY0F8 (ø 7 mm)
Color: Black
BAR LENGHT
4m
4,5 m
5m
5,3 m
800AE + 800PG + 800AT
B1
C2
D1
F3
800AE + 800PG + 800FPL
C2
D1
D1
F3
800AE + 800GA2 + 800AT
C
1
-
-
-
800AE + 800GA2 + 800FPL
C2
-
-
-
Eyelet in the max. load position.
Eyelet in the med. load position.
3
Eyelet in the min. load position.
1
2
For bars with useful passage exceeding 3m, it is COMPULSORY to use the 800RA reinforcement.
For bars with useful passage exceeding 2.5m with mobile support (800FPL) or rack (800GA2), it is
COMPULSORY to use the 800RA reinforcement.
When dealing with long booms with joint, in addition to the reinforcement insert 800RA, it is necessary to install
the shortest part of the boom with the joint towards the cabinet of the barrier.
For boom lengths equal or greater than 4 mt. it MUST USE (compulsory) the ground boom support or the pendulum support.
ATTENTION: FOR ELLIPTIC BOOM IS REQUIRED THE RUBBER PROFILE (800PG4 - 800PG8).
91
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
12 LUXE
AUTOMATIC BARRIER
VOLT
for booms up to 7m
800LUXE
Rh/Lh
Automatic barrier with painted cabinet for booms
up to 7m, complete with built-in electronic control
board, radio receiver and battery charger.
Springs, boom and flashing lights must be ordered
separately.
800LUXE/I
Rh/Lh
Automatic barrier with stainless steel cabinet for booms up to 7m, complete with built-in electronic
control board, radio receiver and battery charger.
Springs, boom and flashing lights must be ordered
separately.
Features:
• commercial use
• for booms up to 7 m
• low voltage DC motor
• optical encoder technology
Pros:
• intensive use
• works even during power outage thanks to the
optional backup battery
• obstacle detection and crush prevention
• in accordance with EN 12445-12543 standards
The twin spring system
is easily adjustable
according to the
length of the boom. No
additional tools needed.
Different models of
springs available
according to the
features of the
installation.
Technical features
Frequency
Power supply
Power rating
Motor power supply
Absorption
Max. torque
Reduction ratio
Min. operating time
Degree of protection
Duty cycle
Operating temperature
Min. width of passage clearance
Max. width of passage clearance
Weight
Electornic control unit
LUXE - LUXE/I
50 - 60 Hz
230 V AC ±10%
300 W
18 V DC
2,8 A
300 Nm
1/512
6 sec.
IP 44
100 %
-20°C ÷ +55°C
4 mt
7 mt
70 Kg
K206MA
Plastic safety cover to
protect the movement
of the boom from
shearing.
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards.
92
M A D E I N I T A LY
Accessories
M-0600000028
Spring wire dia. 5,2 mm, load 90
kg (green)
M-060B3060FP
Spring wire dia. 6,2 mm, load
135 kg (blue)
M-060CITY0FP
Spring wire dia. 7 mm, load 155
kg (red)
M-060LUXE000
Spring wire dia. 9 mm, load 335
kg (yellow)
800CPL
Luxe counterplate
800AE3
Elliptical white painted
aluminium boom, 3 m.
Flashing LED lights and rubber
bead to be ordered separately
800AE2 Elliptical white painted
aluminium boom, 2 m.
Flashing LED lights and rubber
bead to be ordered separately
800AE4
Elliptical white painted aluminium boom, 4 m. Flashing
LED lights and rubber bead to
be ordered separately
800AE5
Elliptical white painted aluminium boom, 5 m. Flashing
LED lights and rubber bead to
be ordered separately
800AT
Boom support
800PG8
8m rubber bead for elliptical
boom
800ATE
Boom support with
electromagnet
900TOWERM 10 cm side photocells
mounting post
800FPL
Pendulum boom support
800GA2
Aluminium bottom skirt, 2,5 m.
800PGA2
Aluminium bottom skirt
extension, 2 m. Max 6 m for
Luxe.
228
447
945
Right-hand version
Left-hand version
800LUXSFA
Boom break-out system
for elliptical boom (LUXE).
Max 5 m.
800ABTSE
Joint for elliptical boom
(LUXE)
800LA4
LED flashing lights for LUXE
elliptical boom, single piece 8m long
800LARG4
LED flashing light (red&green),
single piece 4m long
800LL
LED flashing lights for LUXE
cabinet
1105
max. 6650 mm
800GI
Joint for elliptical boom
800RA
Reinforcement insert for elliptical
boom longer than 5m
800LA8
LED flashing lights for LUXE
elliptical boom, double piece
8+8 m long
339
7098
800LARG8
LED flashing light
(red&green), single piece
8m long
800LLR
LED flashing lights for LUXE
cabinet (red&green)
93
Solar power
Thanks to the
Photovoltaic (PV)
Technology, every
low voltage DC gate
operator can be solar
powered. Discover the
advantages of the solar
energy at page 130
Further accessories:
Transmitters page 110
Photocells page 116
Flashing lights page 119
12 LUXE
AUTOMATIC BARRIER
VOLT
for booms up to 7m
200KBL
Battery kit (LUXE)
250SM126
Memory card for 126 radio
codes
300SA1
Magnetic loop detector
900T-COMM
RS485 Serial Interface to
connect two control units as
Master/Slave
(Activation though TAUPROG
handheld device)
250SM254
Memory card for 254 radio
codes
250SM1022
Memory card for 1022 radio
codes
SPRING
BOOM AND ACCESSORIES
C)
M-060B3060FP (ø 6,2 mm)
Color: Blue RAL 5003
D)
M-060CITY0FP (ø 7 mm)
Color: Red RAL 3000
E)
M-060LUXE000 (ø 9 mm)
Color: Yellow RAL 1004
BOOM LENGTH
4,25 ÷ 4,74
(m)
B+B
B+C
2
B +D
800AE + 800AT + 800PG
B+B
800AE + 800FPL + 800PG
B+C
800AE + 800AT + 800GA2
B+B
800AE + 800FPL + 800GA2
M-0600000028 (ø 5,2 mm)
Color: Green RAL 6002
4 ÷ 4,24
(m)
800AE + 800PG
800AE + 800AT + 800ABTSE
B)
1
2
B +C
4,75 ÷ 5,24
(m)
2
5,25 ÷ 5,74
(m)
5,75 ÷ 6,24
(m)
6,25 ÷ 6,74
(m)
6,75 ÷ 7
(m)
-
1
C +D
-
-
-
C+C
C+C
-
-
-
1
2
B+C
C +D
D+D
C+C
D+D
D +E
C+C
D+D
D +E
2
C+C
D +E
-
D+E
1
2
D+E
1
D+E
1
2
D +E
2
E+E
E+E
2
E+E
E+E
E+E
D +E
D+E
1
E+E
E+E
1 The strongest spring must be installed on the side of the vehicle entrance
2 The weakest spring must be installed on the side of the vehicle entrance
For bars with useful passage exceeding 3m, it is COMPULSORY to use the 800RA reinforcement.
For bars with useful passage exceeding 2.5m with mobile support (800FPL) or rack (800GA2), it is COMPULSORY to use the 800RA reinforcement.
For boom lengths equal or greater than 5 mt. it MUST USE (compulsory) the ground boom support or the pendulum support.
ATTENTION: FOR ELLIPTIC BOOM IS REQUIRED THE RUBBER PROFILE (800PG4 - 800PG8).
Guide to choose and combine booms and accessories
800AE4
4m
800AE5
5m
800AE3
+ 800RA +
+ 800RA +
+ 800GI +
800AE3
+ 800GI +
800AE4
+ 800GI +
800AE2
800AE3
800AE3
5m
6m
7m
All the booms must be fitted with rubber profile (800pg4 - 800pg8). All the booms are predisposed for led signal lights (800la4 - 800la8), pendulum
fork (800fpl) and aluminium bottom skirt (800ga2)
94
SPACE SAVER
PARK
M A D E I N I T A LY
automatic
800PARK
DC automatic park space saver.
800PARKM
Manual park space saver without motor.
800PARKXL
DC automatic park space saver plus.
PARKXL
800PARKMXL
PARK
Manual park space saver plus without motor.
Accessories
750D780M
Electronic control unit for a
single PARK parking space
saver with built-in radio receiver
(expandable up to 4 units)
Technical features
Power supply
Motor power supply
Absorption
Absorbed power
Operating time
Duty cycle
Resistance to weight
Operating temperature
Motor thermal protection
Degree of protection
750EXP780M
Single expansion module for
D780M
Features:
• residential, industrial and public use
• low voltage DC motor
• opening time 5 seconds
• radio-controlled operation
• manual release
Pros:
• fast opening
• ideal to save the park space
• obstacle detection and crush prevention
PARK/XL
230 V AC (50 - 60 Hz)
18 V DC
1,6 A
30 W
5 sec.
100 %
2,5 kg/cm²
-20° C ÷ +55° C
IP 54
451,5
505
293
700
450
293
95
505
Bollard
T-STOP
resistance to impact up to 29.000 J
T-STOP1404-5
Oil-hydraulic bollard, diameter 140 mm, stroke 500 mm, wall thickness 4 mm, complete with
formwork.
T-STOP1404-7
Oil-hydraulic bollard, diameter 140 mm, stroke 700 mm, wall thickness 4 mm, complete with
formwork.
T-STOP1412-5
Oil-hydraulic bollard, diameter 140 mm, stroke
500 mm, wall thickness 12 mm, complete with
formwork.
T-STOP1412-7
Oil-hydraulic bollard, diameter 140 mm, stroke
700 mm, wall thickness 12 mm, complete with
formwork.
T-STOP2004-5
Oil-hydraulic bollard, diameter 200 mm, stroke 500 mm, wall thickness 4 mm, complete with
formwork.
T-STOP2004-7
Hydraulic bollard, diameter 200 mm, stroke 700
mm, wall thickness 4 mm, complete with formwork.
Specifications:
• Bollard complete with formwork
• Removable single-body casing, carbon steel tube,
built-in oil-hydraulic pump, LED flashing light and
room for cables connection box
• High quality carbon steel tube (type 304 stainless
steel available on request)
• Hot-dip galvanized bollard
• Reflective strip
T-STOP2012-5
Oil-hydraulic bollard, diameter 200 mm, stroke
500 mm, wall thickness 12 mm, complete with
formwork.
T-STOP2012-7
Oil-hydraulic bollard, diameter 200 mm, stroke
700 mm, wall thickness 12 mm, complete with
formwork.
T-STOP3012-7
Oil-hydraulic bollard, diameter 270 mm, stroke
700 mm, wall thickness 12 mm, complete with
formwork.
96
M A D E I N I T A LY
Accessories
800TSSEN20
Sensitive head (pressure
activated safety device) for
T-STOP20
800TSSEN30
Sensitive head (pressure
activated safety device) for
T-STOP30
A
800TSVAL
Solenoid for automatic lowering
in case of a power failure for
T-STOP14/20
Impact height
500 mm
800TSSEN
Sensitive head (pressure
activated safety device) for
T-STOP14
D
B
C
E
800TSVAL30
Solenoid for automatic lowering
in case of a power failure for
T-STOP30
800TSPROG
Single electronic control unit,
built-in 433,92 MHz radio
receiver, solenoid and traffic
light, complete with IP56 box
A
T-STOP14
800TSPROG 4
Electronic control unit for up
to 4 bollards, built-in 433,92
MHz radio receiver, solenoid
and traffic light, complete with
IP56 box
800TSRAE
Siren sensor to detect sounds
emitted from emergency vehicles. It is necessary to specify
the country in which the bollard
will be installed.
800TSCH
Security pump lock
(T-STOP14/20)
800TSCH30
Security pump lock
(T-STOP30)
T-STOP20
T-STOP14
T-STOP20
B
140
A
C
D
500/700
B 730/930
200
C443
500/700 735/935
140
500/700
200
507
730/930
500/700
730/930
E
262
D
E
327
443
262
507
327
Ø 273
~ 700
Ø 481
~ 931
800TSRES
Heater kit 250W 230V for low
temperature, complete with
bracket and 1,5m cable to insert
in the bollard (T-STOP14/20)
800TSRES30
Heater kit 250W 230V for low
temperature, complete with
bracket and 1,5m cable to insert
in the bollard (T-STOP30)
800TSAC Acoustic 230 V IP67 alarm
with 0,2 m cable to insert in the
bollard (T-STOP14/20)
800TSAC30
Acoustic 230 V IP67 alarm
with 0,2 m cable to insert in the
bollard (T-STOP30)
Voltage
T-STOP1404-5
T-STOP1404-7
T-STOP1412-5
T-STOP1412-7
T-STOP2004-5
T-STOP2004-7
T-STOP2012-5
T-STOP2012-7
T-STOP3012-7
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
Diameter
140 mm
140 mm
140 mm
140 mm
200 mm
200 mm
200 mm
200 mm
270 mm
Stroke
500 mm
700 mm
500 mm
Wall
Thickness
4 mm
4 mm
12 mm
700 mm
12 mm
700 mm
4 mm
500 mm
500 mm
700 mm
700 mm
4 mm
12 mm
12 mm
12 mm
Manual
Emergency
Release
•
•
•
•
•
•
•
•
•
Resistance
to Impact
2000 J
2000 J
7000 J
7000 J
5000 J
5000 J
15000 J
15000 J
29000 J
97
T-STOP30
Weight
52 Kg
62 Kg
75 Kg
86 Kg
70 Kg
81 Kg
98 Kg
117 Kg
180 Kg
LED
Light
•
•
•
•
•
•
•
•
•
Sensitive
Head
optional
optional
optional
Solenoid
-
-
optional
optional
optional
optional
-
optional
optional
optional
optional
Stainless
Steel
Coating
-
-
-
-
-
-
optional
-
optional
optional
-
-
optional
WINDOWS & SHUTTERS
TWIN
MRC-M
MRC
MF30
MADE IN ITALY
O P E R AT O R
T-WIN
For roller shutters up to 320 kg
850T-WIN22
230 V central motor, shaft Ø 48-60 mm, crown
Ø 200-220 mm; Maximum weight 140 kg.
850T-WIN22P
230 V central motor, shaft Ø 48-60 mm, crown
Ø 200-220 mm; Maximum weight 180 kg.
850T-WIN24
230 V central motor, shaft Ø 76 mm, crown Ø 240
mm; Maximum weight 180 kg.
850T-WIN24BM
230 V central motor, shaft Ø 76 mm, crown Ø 240
mm; Maximum weight 320 kg.
Features:
• residential / commercial use
• lifting capacity up to 320 kg
• 230 V gate operator
• built-in mechanical limit switches
• electrical brake (optional, P/N 850BRK)
Pros:
• suitable for existing roller shutters
• adapters for shaft Ø 48, 60 or 76 mm
• robust, maintenance-free
Technical features
Power supply
Motor power supply
Absorption
Absorbed power
Crown Speed
Lifting Power
Operating temperature
Motor thermal protection
Degree of protection
Shutter max height
100
T-WIN22
1,6 A
400 W
140 kg
T-WIN22P
T-WIN24
220 V AC ± 10% (50 - 60 Hz)
220 V AC
2A
2,8 A
600 W
600 W
10 rpm
180 kg
180 kg
-20° C ÷ +80° C
150° C
IP 32
8m
T-WIN24BM
5,7 A
1200 W
320 kg
110
VOLT
M A D E I N I T A LY
AVAILABLE
Accessories
850BRK
Electrical brake system*
300TKEY
Die-cast aluminium key
switch
A
320
A
T-WIN22
T-WIN22-1
T-WIN22P
T-WIN22P1
T-WIN24
T-WIN24-1
T-WIN24BM
T-WIN24BM1
300BEPS
External surface-mounted
pushbutton with tamperproof housing
300TKEYD
Europrofile cylinder, die-cast
aluminium key switch
300BIP
External flush-mounted
pushbutton with tamper-proof
housing
750K330M
Electronic control unit for 230
V central motors with built-in
433,92 MHz radio receiver,
complete with enclosure
300BIPS
External flush-mounted
pushbutton with emergency
release system and tamperproof housing
* Lifting capacity and torque decrease respectively by 10 kg an 10 Nm when the brake
system is installed
101
ø 200
ø 200
ø 200
ø 200
ø 240
ø 240
ø 240
ø 240
O P E R AT O R
MRC-M
For awnings and shutters.
Maximum torque 50 Nm.
850MRC20M
230 V Tubular motor, hand crank function, Ø 45
mm, c/w bracket and adapters for tube Ø 70 mm
20 Nm torque.
850MRC30M
230 V Tubular motor, hand crank function, Ø 45
mm, c/w bracket and adapters for tube Ø 70 mm
30 Nm torque.
850MRC40M
230 V Tubular motor, hand crank function, Ø 45
mm, c/w bracket and adapters for tube Ø 70 mm
40 Nm torque.
850MRC50M
230 V Tubular motor, hand crank function, Ø 45
mm, c/w bracket and adapters for tube Ø 70 mm
50 Nm torque.
Features:
• tubular motor Ø 45 mm
• 230 V motor
• built-in hand crank function
• self-braking motor
• max. run time 4’
Pros:
• ideal for awnings’ projection up to 4 m
• quick installation
• easy setting of limit switches
• emergency manual operation thanks to the optional hand crank
• easy limit switch setting
Technical features
Degree of protection
Power supply
Absorption
Absorbed power
Crown Speed
Lifting Power
Operating temperature
Operating time
Torque
102
MRC20M
0,92 A
205 W
15 rpm
38 kg
20 Nm
MRC30M
MRC40M
IP 44
230 V AC (50 - 60 Hz)
1,1 A
1,3 A
230 W
292 W
15 rpm
15 rpm
56 kg
76 kg
-10° C ÷ +60° C
4 min.
30 Nm
40 Nm
MRC50M
1,4 A
308 W
12 rpm
94 kg
50 Nm
110
VOLT
AVAILABLE
ø 45
Accessories
850AD70C
Replacement crown drive
adapter kit for tube Ø 70 mm
850CSVP
Weather station
850SND45C
45°/90° hand crank loop for
shutter box
850ANCP
Wind and twilight sensor
850DZ68
Replacement bracket for
MRC-M tubular motors
850PLV
Rain sensor
850MAN150
Steel hand crank, 1500 mm,
with joint arm
300PP
External surface-mounted
pushbutton
A
(mm)
A
MRC20M
MRC30M
MRC40M
MRC50M
590
640
640
640
850OCC
Hand crank loop
Application chart for awnings
ARMS
1
1,5
2
Ø
2,5
3
3,5
4
4,5
5
5,6
TUBE
6
1
70
2
70
4
70
4
70
6
70
ARMS
PROMINENCE AWNING
1
1,5
2
2,5
3
70
TUBE
3,5
2,5
3
References
PROMINENCE AWNING
1
Ø
2
2
ARM WITH 45 Kg. POWER
ARM WITH 35 Kg. POWER
TUBE
1,5
Ø
SERIE Ø 45 mm
2
ARMS
PROMINENCE AWNING
1,5
2
Ø
2
2,5
3
3,5
4
70
103
MRC50M
PROMINENCE AWNING
MRC40M
TUBE
MRC20M
ARMS
ARM WITH 25 Kg. POWER
MRC30M
ARM WITH 15 Kg. POWER
O P E R AT O R
MRC
For interior blinds and shutters.
Maximum torque 50 Nm.
850MRC10
230 V Tubular motor, Ø 45 mm, c/w bracket and
crown drive adapter kit for octagonal tube 60 mm.
10 Nm torque.
850MRC20
230 V Tubular motor, Ø 45 mm, c/w bracket and
crown drive adapter kit for octagonal tube 60 mm.
20 Nm torque.
850MRC30
230 V Tubular motor, Ø 45 mm, c/w bracket and
crown drive adapter kit for octagonal tube 60 mm.
30 Nm torque.
850MRC40
230 V Tubular motor, Ø 45 mm, c/w bracket and
crown drive adapter kit for octagonal tube 60 mm.
40 Nm torque.
850MRC50
230 V Tubular motor, Ø 45 mm, c/w bracket and
crown drive adapter kit for octagonal tube 60 mm.
50 Nm torque.
Materials
PVC
Wood
Insulated aluminium
Extruded aluminium
Insulated steel
Armour-plated steel
Kg/m2
5
10
4
8
10
16
Technical features
Degree of protection
Power supply
Absorption
Absorbed power
Crown Speed
Lifting Power
Operating temperature
Operating time
Torque
Features:
• tubular motor Ø 45 mm
• torque up to 50 Nm
• 230 V motor
• self-braking motor
• max. run time 4’
Pros:
• ideal for existing shutters / blinds
quick installation
• easy setting of limit switches
104
MRC10
0,63 A
146 W
15 rpm
18 kg
10 Nm
MRC20
MRC30
MRC40
IP 44
230 V AC (50 - 60 Hz)
0,92 A
1,1 A
1,3 A
205 W
230 W
292 W
15 rpm
15 rpm
15 rpm
38 kg
56 kg
76 kg
-10° C ÷ +60° C
4 min.
20 Nm
30 Nm
40 Nm
MRC50
1,4 A
308 W
12 rpm
94 kg
50 Nm
110
VOLT
AVAILABLE
Accessories
850AD60C
Replacement crown drive
adapter kit for octagonal tube
60 mm
850DZ68
Replacement bracket for tubular
motors
850SF553
Replacement bracket for
MRC tubular motors
850CT60
Universal idler end cap for tube
Ø 60 mm
850SF523
Adjustable bracket for MRC
tubular motors
850BTOT607 Anti-lift stopper for octagonal
tube 60 mm
850SF511 Bracket for MRC tubular
motors
300PP
External surface-mounted
pushbutton
850SF823 Click-in bracket for MRC
tubular motors
750K330M
Electrical control panel with
433,92 MHz radio receiver and
casing
ø 45
A
(mm)
Application chart for rolling shutters
TUBE
LAST
0
Ø
10 20
30 40
50 60 70 80
References
90 100 110 120
SERIE Ø 45 mm
105
MRC50
MRC40
MRC30
MRC20
MRC10
60
A
MRC10
MRC20
MRC30
MRC40
MRC50
488
488
558
558
558
O P E R AT O R
MF30
For top or bottom hinged
windows. Maximum weight
30 kg
850MF30
230 V hinged window opener. Maximum window
weight 30 kg.
49
335
101
Technical features
Power supply
Maximum thrust load capacity
Maximum traction load capacity
Corse (selezionabili in qualsiasi momento)
Absorption
Loadless translation speed
Duration of maximum loadless travel
Double electrical insulation
Type of service
Operating temperature
Protection of electrical devices
Adjustment of the window frame connection
Pins adjustment for swivel brackets
Connection in parallel more actuators on the same
window
Parallel connection of multiple actuators on different
windows
Chain position control
Electronics equipped with audible warning device to
signal incorrect assembly (buzzer)
Weight of installed equipment
Features:
• 230 V motor
• double flex stainless steel chain
• compact size
• two chain adjustments: 200 or 380 mm
Pros:
• suitable for top or bottom hinged windows
• noiseless and compact
• quick installation
• robust, maintenance-free
106
MF30
230 V AC (50 Hz)
300 N
300 N
200 and 380 mm
0,32 A
24 mm/sec.
16 sec.
Yes
S2 of 4 min.
-5° C ÷ +50° C
IP 30
15 mm
15 mm
Only by means of suitable electronic device
Yes (see wiring diagram)
Yes
Yes
1,1 kg
ACCESSORIES
Transmitters and Radio
Receivers
Safety Devices
Access Control
Safety Edges
Key Switches
Electronic Control Units
Solar Energy
MADE IN ITALY
TRANSMITTERS AND
TECHNOLOGY
RADIO RECEIVERS
Features:
• frequency: 433,92 MHz
• range: up to 200 m in open air (the effective
range depends on terrain and possible radio frequency interferences)
• 281.000 billion code combinations
• rolling code technology: every time the transmitter sends a code, it generates a new code using
an encoder. An algorithm identifies and validates
only the signal of the transmitters encoded by the
radio receiver.
Pros:
• virtually impossible to duplicate
• code can be personalized thanks to the TAUPROG programmer
• ideal for multi-user systems
• a transmitter can be programmed into any number of self-learning radio receivers, thus avoiding
the use of different transmitters
• tougher shells
ROLLING CODE
250K-SLIMRP
Two-channel transmitter, rolling
code technology, 433,92 MHz.
250T-4RP
Four-channel transmitter, rolling
code technology, 433,92 MHz, complete with support.
NEW FUNCTIONS
250TAUPROG
Handheld device to program preset
radio receivers and electronic control boards.
Thanks to the TAUPROG handheld programmer and
the new TAUPROG management software it is possible to create and manage an access control database, with a wide range of new functions. Rolling
code transmitters can’t be duplicated or added an
existing system unless enabled by the same TAUPROG handheld programmer, thanks to the unique
code embedded in each TAUPROG encoder. The
user-friendly TAUPROG database management software (PC version) stores database contents and
allows multiple functions such as customize and
add comments to every transmitter stored, add/remove new transmitters to an existing system, enable/disable codes, make back-up copies and prints.
It is possible to modify advanced parameters on DIAMOND control boards, as closing speed, acceleration
and deceleration time on opening and closing and a
far more. It is very simple just connect TAU-PROG to
the control board through a cable (included) and your
control board will be adjustable at your wish.
110
M A D E I N I T A LY
250T-RADIO1
250T-RADIO2
Universal system made of one
433,92 MHz single-channel and
self-learning receiver with built-in
aerial and a two-channel K-SLIM
transmitter
with
rolling
code
technology.
Universal system made of one 433,92
MHz two-channel and self-learning
receiver with built-in aerial and two
four-channel T-4RP transmitters with
rolling code technology.
69
29
11,5
Radio receivers
250RXSM1
Self-learning, single-channel, 433,92
MHz plug-in radio receiver. Accepts
up to 14 rolling code transmitters or
unlimited dipswitch transmitters.
250RXSM4
Self-learning, four-channel, 433,92 MHz
radio receiver with enclosure. Accepts
up to 14 rolling code transmitters or
unlimited dipswitch transmitters.
250RXSM2
Self-learning, two-channel, 433,92
MHz plug-in radio receiver. Accepts
up to 14 rolling code transmitters or
unlimited dipswitch transmitters.
250RXSM4T
230 V Self-learning, four-channel,
433,92 MHz radio receiver with
enclosure. Accepts up to 14 rolling
code transmitters or unlimited dipswitch
transmitters.
250RXSM1B
Self-learning, single-channel, 433,92
MHz radio receiver with enclosure. Accepts up to 14 rolling code transmitters
or unlimited dipswitch transmitters.
250SM126
Memory card for 126 radio
codes
250RXSM2B
Self-learning, two-channel, 433,92
MHz radio receiver with enclosure.
Accepts up to 14 rolling code
transmitters or unlimited dipswitch
transmitters.
250SM254D
Memory card for 254 radio
codes
250SM1022
Memory card for 1022 radio
codes
Accessories
200BATTBUG
Batteries for T-4, K-SLIM and
BUG2-4 transmitters
250ANTD
Aerial with 5 m cable (to be
mounted on LAMP flashing
lights)
250ANTD1
Aerial with mounting bracket and
5 m cable
111
73
45
37
10
14
TRANSMITTERS AND
TECHNOLOGY
RADIO RECEIVERS
Features:
• frequency: 433,92 MHz
• range: up to 200 m in open air (the effective
range depends on terrain and possible radio frequency interferences)
• 1024 code combinations
• dipswitch technology
Pros:
• easy programming
• code can be easily changed by setting the
switches inside the transmitter
• dipswitch transmitters can be programmed both
in dipswitch and self-learning radio receivers
• a transmitter can be programmed into any number of self-learning radio receivers, thus avoiding
the use of different transmitters
DIP-SWITCH
250K-SLIM*
Two-channel transmitter, dipswitch
technology, 433,92 MHz.
250T-4*
Four-channel transmitter, dipswitch
technology, 433,92 MHz, complete
with support.
* not compatible with the newest control boards generation (Diamond).
112
M A D E I N I T A LY
250TXD2*
Two-channel transmitter, dipswitch technology, 433,92 MHz.
69
29
11,5
250TXD4*
Four-channel
transmitter,
technology, 433,92 MHz.
dipswitch
73
45
37
10
14
Radio receivers
250RXSM1
Self-learning, single-channel, 433,92
MHz plug-in radio receiver. Accepts
up to 14 rolling code transmitters or
unlimited dipswitch transmitters.
250RXSM2
Self-learning, two-channel, 433,92
MHz plug-in radio receiver. Accepts
up to 14 rolling code transmitters or
unlimited dipswitch transmitters.
250RXSM1B
Self-learning, single-channel, 433,92
MHz radio receiver with enclosure.
Accepts up to 14 rolling code
transmitters or unlimited dipswitch
transmitters.
250RXSM2B
Self-learning, two-channel, 433,92
MHz radio receiver with enclosure.
Accepts up to 14 rolling code
transmitters or unlimited dipswitch
transmitters.
Accessories
200BATTTX
Batteries for TXD2 and TXD4
transmitters
250ANTD1
Aerial with mounting bracket
and 5 m cable
200BATTBUG
Batteries for T-4, K-SLIM and
BUG2-4 transmitters
250ANTD
Aerial with 5 m cable (to be
mounted on LAMP flashing
lights)
113
51
85
18
TRANSMITTERS AND
TECHNOLOGY
RADIO RECEIVERS
Features:
• frequency: 433,92 MHz
• range: up to 200 m in open air (the effective
range depends on terrain and possible radio frequency interferences)
• 1024 code combinations
• self-learning technology
SELF LEARNING
250K-SLIMC*
Two-channel transmitter, self-learning technology, 433,92 MHz.
Pros:
• quick and easy programming, without opening
the transmitter’s shell
• these transmitters can be programmed both in
dipswitch and self-learning radio receivers
• ideal for multi-user systems
• a transmitter can be programmed into any number of self-learning radio receivers, thus avoiding
the use of different transmitters
250T-4C*
Four-channel transmitter, self-learning technology, 433,92 MHz, complete with support.
* not compatible with the newest control boards generation (Diamond).
114
M A D E I N I T A LY
Radio receivers
250RXSM1
Self-learning, single-channel,
433,92 MHz plug-in radio
receiver. Accepts up to 14 rolling
code transmitters or unlimited
dipswitch transmitters.
250RXSM4
Self-learning, four-channel,
433,92 MHz radio receiver
with enclosure. Accepts up to
14 rolling code transmitters or
unlimited dipswitch transmitters.
250RXSM2
Self-learning, two-channel,
433,92 MHz plug-in radio
receiver. Accepts up to 14 rolling
code transmitters or unlimited
dipswitch transmitters.
250RXSM4T
230 V Self-learning, four-channel,
433,92 MHz radio receiver with
enclosure. Accepts up to 14 rolling
code transmitters or unlimited
dipswitch transmitters.
250RXSM1B
Self-learning, single-channel,
433,92 MHz radio receiver
with enclosure. Accepts up to
14 rolling code transmitters or
unlimited dipswitch transmitters.
250SM126
Memory card for 126 radio
codes
250RXSM2B
Self-learning, two-channel,
433,92 MHz radio receiver
with enclosure. Accepts up to
14 rolling code transmitters or
unlimited dipswitch transmitters.
250SM254D
Memory card for 254 radio
codes
29
11,5
73
250SM1022
Memory card for 1022 radio
codes
Accessories
250ANTD1
Aerial with mounting bracket
and 5 m cable
69
200BATTBUG
Batteries for T-4, K-SLIM and
BUG2-4 transmitters
250ANTD
Aerial with 5 m cable (to be
mounted on LAMP flashing
lights)
115
45
37
10
14
SAFETY DEVICES
OPTIC
M A D E I N I T A LY
Photocells and Mounting posts
Features:
• synchronized infrared beams
• maximum range 20 m
• beam alignment adjustable up to 15°
• 12 / 24 V power input
• surface mount (no welding required)
Pros:
• compact design
• design suits any architectural style
• full range of accessories
• removable mounting post cover
for easy installation
• photocells can be mounted inside the post in three different positions
• flat back post fits snugly against the wall and allows back-to-back installation
900OPTIC
Set of infrared safety photocells, 12 / 24 V,
surface mount, beam alignment adjustable up to 15°, up to 20 m range.
900TOWERF
Photocell standard mounting post, painted aluminium, 49 cm, with removable
cover for easy installation and photocell
adjustment.
900TOWER2F
Photocell double mounting post, painted aluminium, 98 cm, with removable
cover for easy installation and photocell
adjustment (optional key-switch and keyswitch bracket to be ordered separately).
Accessories
116
900CPTOWER TOWER counterplate
300TKEY
Die-cast aluminium key
switch
300TKEYS
Key switch bracket
300TKEYD
Die-cast aluminium key switch,
Euro Profile Cylinder
900CPOPTIC
Photocell side supports
900CFOTI
Hole-cover plate for 900FOTI
photocells
900TOWERP
Reinforced pedestal Tower
800ATE
Boom support with electromagnet
SAFETY DEVICES
FOT
M A D E I N I T A LY
Photocells
900FOTI
Features:
• synchronized infrared beams
• maximum range 20 m
• adjustable up to 180° (FOTEC)
• 12 / 24 V power input
Set of infrared safety photocells, 12 / 24
V, flush mount, beam alignment adjustable
up to 15°, up to 20 m range.
Pros:
• compact design
• design suits any architectural style
• 180° adjustable photocells are very useful when
beams can’t be perfectly aligned
900FOTEC
Set of infrared safety photocells, 12 / 24 V,
surface mount, adjustable up to 180°, up
to 10 m range.
117
ACCESS CONTROL
RTA
for max. 80 users
300RTA
Proximity transponder reader for access control.
Maximum 80 users.
Features:
• 12 / 24 V power input
• up to 80 users
• NO / NC contact output
• self-learning card memorization through master
card
Pros:
• ideal for small scale applications
• simplified user management
• 12 / 24 V power input
• standalone system (no PC or
special equipment needed)
Accessories
300APM
300RTA extended range aerial
300CARD Transponder card
118
300PK
Key fob transponder
SAFETY DEVICES
LAMP
M A D E I N I T A LY
Flashing light
Features:
• wide input voltage range 230 VAC, 24 VDC and
18 VDC
• built-in aerial support
• cycle count for maintenance alert available
• built-in bracket for wall mount
Pros:
• horizontal or vertical installation
• versions with cycle count for maintenance
alert will indicate when the requisite threshold (set
by the user) has been reached
900LAMP1
12/18 V flashing light.
900LAMP2
230 V flashing light with its own internal circuit.
900LAMP3
230 V flashing light suitable for some TAU control units.
900LAMP4
12/18 V flashing light for TAU electronic control units.
900LAMP5
24 V flashing light for TAU electronic control units.
900LAMPCON3
230 V flashing light with cycle count for maintenance alert.
900LAMPCON4
12/18 V flashing light with cycle count for maintenance alert.
900T-LED
12/24 V led flashing light.
119
SAFETY
EDGES
For sliding gates and doors
900BSD15
1,5 m deformable safety edge kit.
900BSD20
2
m deformable safety edge kit.
Features:
• electromechanical safety edge to stop the gate
operator in case of impact
• rubber edge height: 60 mm
• standard length: 1,5 and 2 m (longer edges available upon request)
900TWC
Wireless safety edge
transmitter
Pros:
• Protection board completely deformable even on
the upper part (where the micro switches are based) to assure a complete safety
• ideal for sliding gates and doors
• possible wireless application; the safety edge
fitted to the leading edge of the gate will offer maximum safety and compliance to EN 12978 standards
• possibility to decide on a normally closed contact
or a resistive 8,2kΩ
120
900TWM
Wireless safety edge master
receiver
SAFETY
M A D E I N I T A LY
EDGES
For up-and-over garage doors and
swing gates
900KICM120
1,20 m safety edge.
900KICM180
1,80 m safety edge.
900KONT120
1,20 m controlled safety edge (8,2K Ω).
900KONT180
1,80 m controlled safety edge (8,2K Ω).
900TAP
Set of 2 plugs for KICM/
KONT
900CUR
Set of 2 curves for KICM/
KONT
900GIU
Set of 2 joints for KICM/
KONT
Features:
• electromechanical safety edge to stop the gate
operator in case of impact
• low voltage watertight micro switches
• standard length: 1,2 and 1,8 m
• controlled version available (8,2k Ω )
Pros:
• ideal for up-and-over garage doors and swing gates
• ensure compliance to EN 12978 standards
• possible wireless application; the safety edge
fitted to the leading edge of the gate will offer maximum safety and compliance to EN 12445-12453
standards
121
KEYSWITCHES
T-KEY
300TKEY
Die-cast aluminium key switch.
300TKEYD
Die-cast aluminium key switch, Europrofile cylinder.
Features:
• available with standard or Europrofile cylinder
die-cast aluminium key switch
• LED courtesy light available
• surface or post mount
300TSL
LED courtesy light for T-KEY
900TOWER2F
Pros:
• tamper-proof
• easy installation
Photocell double
mounting post, painted
aluminium, 98 cm, with
removable cover for easy
installation and photocell
adjustment
122
300TKEYS
Key switch bracket
OTHER
M A D E I N I T A LY
ACCESSORIES
300SC
300SCE
Key switch, flush mount
Key switch, surface mount
300TSG-4RP
250T-PHONE
Wireless keypad, battery operated.
Works with RXDC radio receivers or
with electronic control units with built-in
radio receiver
900-1800 MHz GSM dual band
activator
900T-COMM
750T-RELE
RS485 Serial Interface to connect two
control units as Master/Slave. Activation though TAUPROG handheld device. (K126MA-K206MA-D749MA)
Relay board for multiple installations
300SCMS1
300SA1
Magnetic key switch
Magnetic loop detector
300SCMS3
300PPI
Decoder for 300SCMS1
Heavy duty pushbutton
panel
300CMS
300PP
Magnetic key
Pushbutton panel
123
12 D749MA
ELECTRONIC CONTROL UNIT
VOLT
For swing gate operators
750D749MA
Electronic control unit for one or two DC gate operators with encoder, complete with 433,92 Mhz
rolling code radio receiver, battery charger, transformer and enclosure.
230
124
300
Programmable Functions
D749MA
Accessories
Automatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
200BATT
12 V Battery, 7,2 Ah
with cable
750CUP
Control unit enclosure
protective lid
M-030KITKB20
Battery cables kit (20 pcs)
750COL
Control unit mounting post
250SM126
Memory card for 126 radio
codes
250SM254
Memory card for 254 radio
codes
Programming through TAUPROG handheld device
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Outputs-Inputs
M1 output
M2 output
Flashing light output
Delay wing closing
Courtesy light output
Electronic force adjustment
Electric lock output
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Gate open LED output
12 Vdc output for auxiliaries
24 Vdc output for auxiliaries
Internal photocell FTI output
Pedestrian feature
External photocell FTE output
Clock function
Open/close input
Encoder
Pedestrian input
Built-in radio card
Slow-down
Receiver preset for digital keypads
Stop input
Open button input
Close button input
Sensitive edge input
124
D749MA
230
ELECTRONIC CONTROL UNIT
D760M
VOLT
For swing gates operators
750D760M
Electronic control unit for one or two 230 V gate
operators with soft-stop and built-in 433,92 MHz
radio receiver, complete with enclosure.
230
124
300
Accessories
Programmable Functions
Automatic operation
750CUP
Control unit enclosure
protective lid
750COL
Control unit mounting post
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Outputs-Inputs
Close 5 secs after photocells
D760M
Working time (TL) adjustment
M1 output
Gate open time (TCA) adjustment
M2 output
Flashing light output
Gate open time (TCA) disable
Courtesy light output
Delay wing closing
Electric lock output
Electronic force adjustment
Gate open LED output
Automatic realignment after black-out
12 Vdc output for auxiliaries
Step-by-step operation (openstop-close-stop-open)
24 Vdc output for auxiliaries
Internal photocell FTI output
No reverse in opening manoeuvre
External photocell FTE output
Pedestrian feature
Open/close input
Clock function
Pedestrian input
Encoder
Stop input
Built-in radio card
Open button input
Slow-down
Close button input
Receiver preset for digital keypads
Sensitive edge input
125
D760M
12 K996M
ELECTRONIC CONTROL UNIT
VOLT
For up-and-over garage
door openers
200K996M
Electronic control unit for one or two DC up-andover garage door openers with soft-stop, built-in
433,92 MHz radio receiver and enclosure.
230
202
131
255
Programmable Functions
K996M
Accessories
Automatic operation
750SCB12C
Battery charger (optional)
Semiautomatic operation
Man present functions
Pre-flashing disable
200BATT
12 V Battery, 7,2 Ah
with cable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Outputs-Inputs
M1 output
M2 output
Flashing light output
Delay wing closing
Courtesy light output
Electronic force adjustment
Electric lock output
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Gate open LED output
12 Vdc output for auxiliaries
24 Vdc output for auxiliaries
Internal photocell FTI output
Pedestrian feature
External photocell FTE output
Clock function
Open/close input
Encoder
Pedestrian input
Built-in radio card
Slow-down
Receiver preset for digital keypads
Stop input
Open button input
Close button input
Sensitive edge input
126
K996M
ELECTRONIC CONTROL UNIT
K892M
For up-and-over garage door
openers
200K892M
Electronic control unit for one or two 230 V up-andover garage door openers with soft-stop, built-in
433,92 MHz radio receiver and enclosure.
230
202
101
255
Programmable Functions
Automatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Outputs-Inputs
Close 5 secs after photocells
K892M
Working time (TL) adjustment
M1 output
Gate open time (TCA) adjustment
M2 output
Flashing light output
Gate open time (TCA) disable
Courtesy light output
Delay wing closing
Electric lock output
Electronic force adjustment
Gate open LED output
Automatic realignment after black-out
12 Vdc output for auxiliaries
Step-by-step operation (openstop-close-stop-open)
24 Vdc output for auxiliaries
Internal photocell FTI output
No reverse in opening manoeuvre
External photocell FTE output
Pedestrian feature
Open/close input
Clock function
Pedestrian input
Encoder
Stop input
Built-in radio card
Open button input
Slow-down
Close button input
Receiver preset for digital keypads
Sensitive edge input
127
K892M
ELECTRONIC CONTROL UNIT
D703
For commercial sliding gate
operators
600D703
230/400 V electronic control unit for one gate operator with electrical brake, complete with enclosure.
230
124
300
Programmable Functions
D703
Accessories
Automatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
750CUP
Control unit enclosure
protective lid
750COL
Control unit mounting post
750COP2
Control unit box cover with
2 command buttons
750COP3
Control unit box cover with
3 command buttons
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Outputs-Inputs
M1 output
M2 output
Flashing light output
Delay wing closing
Courtesy light output
Electronic force adjustment
Electric lock output
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Gate open LED output
12 Vdc output for auxiliaries
24 Vdc output for auxiliaries
Internal photocell FTI output
Pedestrian feature
External photocell FTE output
Clock function
Open/close input
Encoder
Pedestrian input
Built-in radio card
Slow-down
Receiver preset for digital keypads
Stop input
Open button input
Close button input
Sensitive edge input
128
D703
ELECTRONIC CONTROL UNIT
K330M
For central motors
750K330M
Electronic control unit for 230 V central motors with
built-in 433,92 MHz radio receiver, complete with enclosure.
112
49
112
139
Programmable Functions
Automatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Outputs-Inputs
Close 5 secs after photocells
K330M
Working time (TL) adjustment
M1 output
Gate open time (TCA) adjustment
M2 output
Flashing light output
Gate open time (TCA) disable
Courtesy light output
Delay wing closing
Electric lock output
Electronic force adjustment
Gate open LED output
Automatic realignment after black-out
12 Vdc output for auxiliaries
Step-by-step operation (openstop-close-stop-open)
24 Vdc output for auxiliaries
Internal photocell FTI output
No reverse in opening manoeuvre
External photocell FTE output
Pedestrian feature
Open/close input
Clock function
Pedestrian input
Encoder
Stop input
Built-in radio card
Open button input
Slow-down
Close button input
Receiver preset for digital keypads
Sensitive edge input
129
K330M
12 PF40
SOLAR POWER
VOLT
200PF40
40 Watt photovoltaic panel.
200BATTMFR
12 Volt 27Ah battery.
200RCF
Adjustment board for photovoltaic panel.
200PSP
Support pole for photovoltaic panel.
200APP
Wall fixing bracket.
Features:
• photovoltaic panels can be combined with all TAU
12 V operators
• no need for power lines or a smart grid
Pros:
• easy and quick installation
• ideal when the installation is far from available
power lines
• battery ensures that the gate continues to work
even in the event of prolonged cloudy weather
• energy saving and environmental friendly
200BATTMFR
200RCF
200PSP
200APP
130
To find out the optimal size of the PV power system please contact our customer care at: [email protected]
131
IMPACT FORCE
GAUGE
Features:
• impact force gauge for automatic/power operated doors/gates according to EN12445-EN12453
standards
• display and internal storage allowing up to 50
measurements to be saved
• interactive menu allows sending, deleting and
scrolling saved tests
Pros:
• quick and easy set-up and software installation
• blue-tooth version allows a quick data transmission to the PC for an immediate analysis of values
and diagrams
• with the extension (supplied) and the practical
180° turning handle all tests can easily be carried
out even on difficult installations
900FUSB
USB FORCE IMPACT GAUGE
Supplied in a cushioned carrying case complete with software (PC), USB cable
for data transmission, handle key, memory up to 50 tests, instruction manual
and calibration certificate. Linear extension for 30 to 50 cm included.
900FBLU
BLUETOOTH FORCE IMPACT GAUGE
Supplied in a cushioned carrying case complete with software (PC), Bluetooth
Dongle Key for data transmission, spanner for handle, memory up to 50 tests,
instruction manual and calibration certificate. Linear extension for 30 to 50 cm
included.
132
Demo material
EXPO
M A D E I N I T A LY
Point-Of-Purchase tools
C-SHOW01
Demogate with R18BENC
swing gate operator
C-BLN
underground
Notepad C-SHOW02
C-PENNA
Demogate with T-ONE5B sliding gate operator
Pen
C-SHOW03
C-TOTEM
Demogate with ARM2000ENC swing gate
operator
Advertising totem pole, 165 cm
133
SPECS
ARM200
Installation (mm)
ARM2000
Installation (mm)
A
C
A
B
B
Y°
L
L
Installation sizes (mm)*
Code
ARM225I ARM225BI
ARM250I ARM250BI
ARM270I ARM270BI
Code
90°
100°
90°
100°
110°
90°
100°
110°
Installation sizes (mm)*
A
110 ÷ 165
130 ÷ 135
120 ÷ 200
145 ÷ 200
170 ÷ 200
150 ÷ 225
175 ÷ 225
210 ÷ 225
B
120 ÷ 165
120 ÷ 130
110 ÷ 280
110 ÷ 235
135 ÷ 270
170 ÷ 345
170 ÷ 285
170 ÷ 225
C
20
20
20
20
20
20
20
20
L
1070
1070
1350
1350
1350
1560
1560
1560
Code
ARM2000IS/IF ARM2000BI
ARM2000IFC
Door opening
90°
100°
90°
95°
A
145 ÷ 175
165 ÷ 170
145 ÷ 175
150 ÷ 170
* Follow the instructions for the installation
* Follow the instructions for the installation
Note: to work correctly, the angle formed by the actuator and the gate
(Y° fig. 4) must be > 3° (ARM225 - ARM250) and > 4° (ARM270) both with
the gate completely closed and completely open.
EASY
Installation (mm)
BRCE1
Installation (mm)
minimum
250 mm
90°
90°
260
140
EASYwith articulated arm
EASY with BRCE1
134
B
150 ÷ 190
150 ÷ 155
150 ÷ 180
150 ÷ 165
L
800
800
780
780
SALES
M A D E I N I T A LY
TERMS
SALES CONDITIONS
Unless agreed otherwise, prices indicated in the current price-list are intended
as ex works and inclusive packing in cardboard boxes. VAT and all Taxes are
to the customer’s charge. The prices indicated in the current price-list are not
binding and company TAU s.r.l. reserves the right to amend them without notice.
TAU s.r.l. disclaims all resposibility for non-compliance of safety standars and
for incorrect use of the product by unqualified installer. Company TAU s.r.l.
conserves ownership of the goods supplied until such time as full payment has
been made. For bulk quantities ask for offer.
DELIVERY: Ex works.
GUARANTEE: See the certificate enclose to the product.
N.B.: Due to its continued product improvement policy and its desire to more
closely satisfy market requirements, TAU srl reserves the right to modify the
technical data and the contents of this publication without prior notice. It also
declines liability for any printing or transcription errors.
135
C - C A T 17- G B 0 6 / 17
Via Enrico Fermi, 43 - 36066 Sandrigo (VI) Italia
Tel +39 0444 750190 - Fax +39 0444 750376 - [email protected] - www.tauitalia.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement