Fibre Optic Cabling
European Product Catalog 2006
Tyco Electronics AMP NETCONNECT
For Eastern European Countries
not shown please call
+49-6103-709-1166
For Middle East and African
Countries not shown
please call +33-1-3420-2122
2006
European
Product Catalog
Premises Cabling
Intelligent Infrastructure Management System
Fully automated system
●
reduces costly network
failures and downtimes
●
integrates network layer
and physical layer
management
●
offers 100% accurate documentation in real-time
●
features integration into
facility management tools
●
improves asset utilization
●
increases the company’s
productivity
Prepare your network
today for tomorrow’s
intelligent infrastructure
management requirements –
without an uplift in cost!
The AMPTRAC Ready! patch panel series
enables you to prepare your network for an
Intelligent Infrastructure Management System years
before you actually implement the AMPTRAC system.
These industry standard 19" patch panels are
installed like any other typical passive panel in
your rack. Once an Infrastructure Management
is needed, just plug upgrade kits onto these panels
and enjoy all features of the AMPTRAC System
without any cutting off or disruption of the
installed cabling system!
Learn more about this remarkable product set
in this catalog on pages 10 & 13 (for UTP) and 31 & 32 (for STP).
Content
Table of Contents
1
2
3
4
5
6
7
Unshielded Twisted Pair (UTP) Cabling Systems
7
Shielded Twisted Pair (STP) Cabling Systems
27
Fibre Optic (FO) Cabling Systems
49
Ethernet LAN Solutions
85
Universal Outlets/Faceplates (unpopulated)
93
Tools, Baluns, Miscellaneous
101
Index
119
25 Years Warranty
The AMP NETCONNECT Warranties
Twenty-five years from now, you’ll thank us.
We are confident that your AMP NETCONNECT
It’s Standard Equipment
system will keep performing to current industry
This coverage is automatically part of the pack-
standards. If ever it does not meet those stan-
age when you specify AMP NETCONNECT pro-
dards within 25 years of the date of installation,
ducts end-to-end and when a Tyco Electronics-
we’ll provide the reasonable parts and labor
authorized NETCONNECT Design & Installation
(ND&I) contractor registers the network design
to replace or repair the AMP NETCONNECT
product.
with Tyco Electronics and performs the actual installation in accordance with AMP NETCONNECT
requirements.
●
25 years coverage on system performance
●
25 years coverage on components
●
25 years coverage on applications
Who’s Covered
●
Based on industry standards
Unlike most system suppliers, Tyco Electronics
●
Includes parts and labor
provides warranty coverage directly to the end user.
●
Tyco Electronics provides coverage directly
Many suppliers provide coverage to the installers,
to the end user— if something is wrong,
who then provide coverage to the customers.
Tyco Electronics will make it right
But with the Tyco Electronics warranties, there
are no middlemen. The warranties are between
you and Tyco Electronics.
Which means if something goes wrong, we’ll fix it.
Some conditions may apply. For more information
contact your local AMP NETCONNECT sales office
(see backpage of this catalog for Phone and Fax).
2
http://www.ampnetconnect.com/EMEA
How to select a Cabling System
AMP NETCONNECT is one of the leading companies in premise cabling systems and offers a big spectrum of products for
networking installations. The intention of this catalog is to provide a good overview over the available components in different
technologies. Therefore the catalog is splitted into Unshielded Twisted Pair (Chapter 1), Shielded Twisted Pair (Chapter 2) and
Fibre Optic (Chapter 3) Cabling Systems. Within these chapters the components are grouped by family (system cables, patch panels,
connectivity, outlets, patch cords etc.). Unpopulated universal outlets and faceplates applicable for all 3 technologies can be
found in Chapter 5. Active devices like Ethernet Switches, Media Converters or Wireless LAN equipment are located in Chapter 4.
Tools, baluns, cable management and labeling accessories in Chapter 6 are completing the product portfolio.
To provide a quick guide for selecting the correct system components in an easy way, the following 3 pages offer a “system
selection guideline”:
●
Step 1: Which technology is selected?
Unshielded Twisted Pair (UTP), Shielded Twisted Pair (STP) or Fibre Optic (FO)
●
Step 2: Which System Performance is needed?
Category 3, 5E, 6 or 7 for Twisted Pair – OM1, 2, 3 (multimode) or OS1 (singlemode) for Fibre Optic
●
Step 3: What kind of connector termination should be used?
Classic IDC Block Jack, variable edge connector system or CrossConnect for Twisted Pair (TP) – Epoxy/splicing technologies,
quick termination technology or a ready-terminated system for Fibre Optic
After these main questions are answered only those Connectivity Systems remain that meet the selected criteria. The planner can
use the block arrow schemes on pages 4, 5 and 6 which refer to a channel link (see figure below). Following these block arrows from
left to right will help finding the required system components quickly. Within one arrow all components are exchangeable and can be
combined with other products of the following arrows.
Example: A shielded, Category 6 IDC Block Jack System should be created (➜ STP ➜ Cat. 6 ➜ IDC Block Jack).
System Pathfinder
Turning the Right Components Into a Complete Network Infrastructure System
Remaining options are the SL 110Connect System with cable jacks (page 41) as well as the AMP-TWIST-6S System using either
die-cast dual outlets (page 45) or also cable jacks (page 41). The patch panel choice for both systems is either the PCB-based
24-port-panel (page 31) or unpopulated patch panels (page 32) that can be filled with cable jacks. For system horizontal cable
PiMF COMPACT 250 (page 28) is the minimum choice. Patch cords for this system are found on page 46, accessories in the related
chapters mentioned at the bottom of each of the following 3 pages.
Outlet
Horizontal Cable
Patch Panel
Patch Cord
Patch Cord
Link Model of a Complete Network System
http://www.ampnetconnect.com/EMEA
3
System Pathfinder UTP
System Pathfinder
Technology Performance Termination-Technique
Relevant System Components with Page References
Connect. System
IDC Block Jack
Cat. 6
CrossConnect
IDC Block Jack
UTP
Cat. 5E
CrossConnect
Industrial
Cat. 3
IDC Block Jack
SL110Connect
BS Low Profile
http://www.ampnetconnect.com/EMEA
22
610XC Conn. Blocks 16
610XC WiringBlocks 16
610XC Kits
17
System Cables
PCB Panel
10
SL 110C Panels 10, 11,13 U/UTP Horizontal
Unpopulated Panels 13
610XC 19“ Panel
U/UTP Horizontal
610XC Frames
110XC Conn. Blocks 18 110XC 19“ Panel
110XC WiringBlocks 18
110XC Kits
19 110XC Frames
EtherSeal Kits
21
Faceplates/Enclosures 97
SL110Connect
SLToolless
Standard110Connect
Telephone Coupler
Patch Cords
RJ-45 (LSZH or PVC) 23
8
CPT Cable Assembly 26
16
610XC/610XC
25
610XC/RJ-45
25
8
17
SL110Connect
20 PCB Panel
11
SL Toolless
20 SL110C Panel 11,13 U/UTP Horizontal
Standard110Connect 21,22
12 25pair PS Cable
BS Low Profile
22 6Block Panels
„Mosaic“ Dual Outlet 22 Unpopulated Panels 13
The following sections are valid for all systems on this page:
4
20
Patch Panels
8
RJ-45 (LSZH or PVC) 24
9
CPT Cable Assembly 26
18
U/UTP Horizontal
8
110XC/110XC
25
19
25pair PS Cable
9
110XC/RJ-45
25
PCB Panel
11
SL110C Panel
11,13
U/UTP EtherSeal Cable 8
6Block Panels
12
Unpopulated Panels 13
EtherSeal Cord
26
RJ-45 (Cat.5E)
24
20
20 Telephone Panels
21 Unpopulated Panels
21
12 TelephoneBackboneCable 9
13 25pairPS Cable (Cat.5E) 9
Ethernet LAN Solutions
85-92
Outlets/Faceplates
93-100
Twisted Pair Tools
103-104
Cable Management
113-114
Labeling
115-118
System Pathfinder STP
Relevant System Components with Page References
Connect. System
Cat.7+
ACO+ Inserts
Variable Edge Connector
System Cables
33
ACO+ Outlet Kits 42-44
IDC Block Jack
30
PiMF 600 MHz
28
46
RJ-45 PiMF 600 MHz 46
PiMF COMPACT 600 28
PCB Panel
31
41 Modular Jack Panel 32
PiMF COMPACT 250 28
CPT Cable Assembly 48
ACO+ Inserts
Variable Edge Connector
28
RJ-45 PiMF 600 MHz 46
SL 110Connect
AMP-TWIST-6S (Outlet) 45
Cat.6
PiMF 1200 MHz
Patch Cords
TERA™
ACO+ Panel Kits
ACO+ EdgeC. MkII 43
AMP-TWIST-6S (Jack) 41
STP
Patch Panels
System Pathfinder
Technology Performance Termination-Technique
Unpopulated Panels 32
34,37
ACO+ Outlet Kits 42-44
ACO+ Panel Kits
30
PiMF COMPACT 250 28
RJ-45 PiMF 600 MHz 46
31
SF/UTP Horizontal 29
RJ-45 SF/UTP
47
32
F/UTP Horizontal
RJ-45 F/UTP
47
RJ-45 SF/UTP
47
30
PiMF COMPACT 250 28
RJ-45 F/UTP
47
ACO+ EdgeC. MkII 43
IDC Block Jack
Cat.5E
SL 110Connect
41
SL Toolless
41 PCB Panel
Standard 110Connect 41 Unpopulated Panels
„Mosaic“ Dual Outlet 45
ACO+ Inserts
Variable Edge Connector
35-38
ACO+ Outlet Kits 42-44
ACO+ Panel Kits
ACO+ EdgeC. MkII 43
Industrial
EtherSeal Kits
29
41
PCB Panel
31
Unpopulated Panels
32
SF/UTP EtherSeal Cable 29 EtherSeal Cord
Faceplates/Enclosures 97
The following sections are valid for all systems on this page:
Ethernet LAN Solutions
48
85-92
Outlets/Faceplates
93-100
Twisted Pair Tools
103-104
Cable Management
113-114
Labeling
115-118
http://www.ampnetconnect.com/EMEA
5
System Pathfinder FO
System Pathfinder
Technology Performance Termination-Technique
Relevant System Components with Page References
Connect. System
Classic Epoxy/Splice
OS1
9µm
FO
OM3
50µm
XG
57-63
70, 71, 80 19’’ST,SC,LC
19’’ MT-RJ 57,59-61,63
MT-RJ (Pigtail)
80 Wall Mount Enclosure 64-67
LightCrimp ST
Ready-terminated
MPO Cassettes
77 19’’ST, SC
60 19’’ Rack Mount
MPO Fanout Cords
OM1
62,5µm
Ready-terminated
59
57-63
70, 71, 80 19’’SC,LC
19’’ MT-RJ 57,59-61,63
MT-RJ (Pigtail)
80 Wall Mount Enclosure 64-67
SC, LC
81, 83
ST, SC, LC
82, 83
MT-RJ
81, 83
ST, SC, LC
82, 83
MT-RJ
81, 83
SC, LC
82, 83
MT-RJ
81
19’’ SC, LC
SC, LC
82, 83
MT-RJ
81
SC, LC
82, 83
MT-RJ
81
Fiber Optic Cable 51-56
57-63
MT-RJ XG
68, 69
Wall Mount Enclosure 64-66
60 19’’ Rack Mount
59
MPO Trunk Cable
MPO Fanout Cords
84
84 Wall Mount Enclosure 64-66
57-63
70, 71, 80 19’’ST,SC,LC
19’’ MT-RJ 57,59-61,63
MT-RJ (Pigtail)
80 Wall Mount Enclosure 64-67
Fiber Optic Cable 51-56
57-63
LightCrimp ST, SC 77 19’’ ST, SC
LightCrimpPlus ST,SC,LC 76 19’’ MT-RJ 57,59-61,63
MT-RJ
68,69 Wall Mount Enclosure 64-66
Fiber Optic Cable 51-56
ST, SC, LC
MPO Cassettes
60 19’’ Rack Mount
59
MPO Trunk Cable
MPO Fanout Cords
84 Wall Mount Enclosure 64-66
Ethernet LAN Solutions
Outlets/Faceplates
http://www.ampnetconnect.com/EMEA
MT-RJ
Fiber Optic Cable 51-56
The following sections are valid for all systems on this page:
6
82, 83
84
84 Wall Mount Enclosure 64-66
MPO Cassettes
&
57-63
MPO Trunk Cable
Ready-terminated
Quick Termination
ST, SC, LC
Fiber Optic Cable 51-56
LightCrimp Plus SC, LC 76 Wall Mount Enclosure 64-66
LightCrimp Plus SC,LC 76
Classic Epoxy/Splice
Patch Cords
Fiber Optic Cable 51-56
Quick Termination
OM2
50µm
System Cables
ST, SC, LC
Quick Termination
Classic Epoxy/Splice
Patch Panels
ST, SC, LC
82, 83
MT-RJ
81, 83
ST, SC, LC
82, 83
MT-RJ
81, 83
ST, SC, LC
82, 83
MT-RJ
81, 83
84
85-92
93-100
Fibre Optic Tools
105-112
Cable Management
113-114
Labeling
115-118
Unshielded Twisted Pair (UTP)
Cabling Systems
1.
● Cost effective components for fast and easy installation
● Complete Systems (System Cable, Patch Panels,
Outlets, Patch Cords)
● Available from Cat. 3 up to Cat. 6:
– Cat. 6: High-end technology,
Pyramid Tested, Gigabit Ethernet
– Cat. 5E: Reliable cost-effective technology,
Gigabit Ethernet
– Cat. 3: Standard technology for telephone
applications, very cost effective and
high density
● Patch panels & outlets in PCB design or
for discrete jacks
Unshielded
Twisted Pair (UTP)
Cabling Systems
● MRJ-21 connector system:
– High density modular plugable cabling
system supporting Gigabit Ethernet
– Perfect for data center environments
System Cables
Patch Panels
10
● CrossConnect XC System:
MRJ-21 Connector System
14
CrossConnect XC
16
Connectivity
20
Wall Outlets
22
Patch Cords
23
– reliable and cost effective high-density
distribution system
– Cat. 6 or 5E performance for Data and
Voice Applications
8
System Cable (Horizontal)
Unshielded Twisted Pair Cabling
Cat. 6 U/UTP 250 MHz Cable
Product Facts:
●
●
●
250 MHz Cat. 6 U/UTP Cable acc. ISO 11801 2nd edition
and EIA/TIA-854
X-Web Spacer Design
AWG 23
Color: white
-X
Packaging
-2
-3
305 m, Reel-In-A-Box
1000 m, Reel
Sheathing
Type
OD
Packaging
Part Number
PVC
Simplex
5,7 mm
see table
0-0219584-X
LSZH
Simplex
5,7 mm
see table
0-0219585-X
LSZH
Duplex
2 x 5,7 mm
500 m/Reel
0-1711053-1
Cat. 5E U/UTP 100 MHz Cable
Product Facts:
●
●
●
100 MHz Cat. 5E U/UTP Cable
Very low skew, supports
Gigabit Ethernet 1000Base-T
AWG 24
Color: white
-X
Packaging
-2
-3
305 m, Pullbox
1000 m, Reel
Sheathing
Type
OD
Packaging
Part Number
PVC
Simplex
5,1 mm
see table
0-0057535-X
LSZH
Simplex
5,1 mm
see table
0-0057538-X
LSZH
Duplex
2 x 5,1 mm
500 m/Reel
0-1711043-1
EtherSeal Cat. 5E U/UTP 100 MHz Cable
Product Facts:
●
●
●
●
●
●
Meets or exceeds TIA/EIA and ISO Category 5E specifications
Exceeds all requirements for Gigabit Ethernet
Sunlight (UV) resistant for harsh environments
Oil resistant, Level II
Double jacketed – PVC
CMR (Riser) rated
Color: grey
8
http://www.ampnetconnect.com/EMEA
Sheathing
OD
Packaging
Part Number
Solid conductors
6,35 mm
305 m/Reel
0-1499447-3
Stranded conductors
6,60 mm
305 m/Reel
0-1499448-3
System Cable (Backbone)
Product Facts:
●
●
●
Cat. 5 Backbone Cable, also for horizontal cabling
25 Pair construction
AWG 24
Color: white
Sheathing
OD
Packaging
Part Number
PVC
12,2 mm
305 m/Reel
0-0057534-1
LSZH
12,2 mm
305 m/Reel
0-0057537-1
Multi-Pair Cat. 3 Backbone Cable
Product Facts:
●
●
●
Cat. 3 Telephone Backbone Cable
AWG 24
LSZH Jacket
Color: white
No. of Pairs
OD
Packaging
Part Number
50
15,4 mm
305 m/Reel
0-0057888-4
100
21,9 mm
305 m/Reel
0-0057533-4
http://www.ampnetconnect.com/EMEA
Unshielded Twisted Pair Cabling
25 Pair Cat. 5 PowerSum Backbone Cable
9
Patch Panels
Unshielded Twisted Pair Cabling
Cat. 6 – AMPTRAC Ready! Patch Panel
Product Facts:
●
●
●
●
●
●
●
●
Description
Color
Part Number
Cat. 6 Full AMPTRAC patch panel
black (RAL 9005)
0-1711147-1
Cat. 6 AMPTRAC Ready! patch panel
black (RAL 9005)
0-1711147-2
Cat. 6 AMPTRAC Ready! patch panel
light grey (RAL 7035) 0-1711147-3
I/O Upgrade Kit from AMPTRAC Ready! to Full AMPTRAC black
19, 1 U, RJ-45 Patch Panel with 24 ports
AMPTRAC Ready! version:
prepared for AMPTRAC upgrade
Full AMPTRAC version:
fully equipped with AMPTRAC functionality
Cat. 6 Pyramid Tested (see page 127)
LSA+ tool compatible enhanced 110 IDC blocks
Rear cable management
Universal wiring – T568 A or B wiring pattern
Protected PCB
0-1711148-1
Cat. 6 – SL 110C Patch Panel without Rear Cable Management
Product Facts:
●
●
●
●
●
●
●
No. of Ports
-X
Delivery
-1
-2
Jacks installed
Jacks loose
Height
Part Number
12
mounts vertically
0-1375013-X
24
1U
0-1375014-X
48
2U
0-1375015-X
96
4U
0-1375016-X
●
19, RJ-45 patch panel (except 12 port)
12-Port Mini Patch Panel mounts vertically
on 89D bracket (included)
Cat. 6 Pyramid Tested (see page 127)
Ports may be exchanged individually
Universal wiring – T568 A or B wiring pattern
Incl. strain relief
Replacement labels and clear label covers
on page 117
Can be supplied with jacks loose packed
to allow easier installation
Color: black
Cat. 6 – SL 110C Angled Patch Panel without Rear Cable Management
Product Facts:
●
●
●
●
●
●
●
No. of Ports
10
Height
Part Number
24
1U
0-1499600-1
48
2U
0-1499601-1
http://www.ampnetconnect.com/EMEA
Angled patch panels with 140 mm protrusion
Eliminates the need for horizontal cable
management
Cat. 6 Pyramid Tested (see page 127)
Ports may be exchanged individually
Universal wiring – T568 A or B wiring pattern
Incl. strain relief
Can be supplied with jacks loose packed
to allow easier installation
Color: black
Patch Panels
Product Facts:
●
●
●
●
●
●
19, 1 U, RJ-45 patch panel with 24 ports
Cat. 6 Pyramid Tested (see page 127)
Inclined design for ergonomic termination
Ports may be exchanged individually
Universal wiring – T568 A or B wiring pattern
Replacement labels and clear label covers on page 117
Color: black
Description
Part Number
Cat. 6 – inclined PCB Patch Panel with rear cable management
0-0336653-1
Cat. 5E – PCB Patch Panels with Rear Cable Management
Product Facts:
●
●
●
●
19, 1 U, RJ-45 patch panel with 24 or 48 ports
Cat. 5E
LSA+ & 110Connect compatible connecting blocks
Universal wiring – T568 A or B wiring pattern
No. of Ports
Height
Color
Part Number
24
1U
see table
0-0336695-X
48
1U
black
0-1711284-1
-X
Color
-1
-2
-3
grey (RAL 7032)
black (RAL 9005)
light grey (RAL 7035)
Cat. 5E – SL 110C Patch Panel without Rear Cable Management
Product Facts:
●
●
●
●
●
●
●
19, RJ-45 patch panel (except 12 port)
12-Port Mini Patch Panel mounts vertically
on 89D bracket (included)
Cat. 5E
Ports may be exchanged individually
Universal wiring – T568 A or B wiring pattern
Replacement labels and clear label covers on page 117
Can be supplied with jacks loose packed to allow easier installation
Color: black
No. of Ports
Height
Part Number
-X
Delivery
12
mounts vertically
0-1479153-X
24
1U
0-1479154-X
-1
-2
Jacks installed
Jacks loose
48
2U
0-1479155-X
96
4U
0-1479156-X
Unshielded Twisted Pair Cabling
Cat. 6 – Inclined SL 110C Patch Panel with Rear Cable Management
Cat. 5E – SL 110C Angled Patch Panel without Rear Cable Management
Product Facts:
●
●
●
●
●
●
●
Angled patch panels with 140 mm protrusion
Eliminates the need for horizontal cable management
Cat. 5E
Ports may be exchanged individually
Universal wiring – may be terminated to T568A or T568B
Incl. strain relief
Can be supplied with jacks loose packed to allow easier installation
Color: black
No. of Ports
Height
Part Number
24
1U
0-1499602-1
48
2U
0-1499603-1
http://www.ampnetconnect.com/EMEA
11
Patch Panels
Unshielded Twisted Pair Cabling
Cat. 5E – 6Block Patch Panels without Rear Cable Management
Product Facts:
●
19, RJ-45 patch panel (except 12 port)
●
12-Port Mini Patch Panel mounts vertically
on 89D bracket (included)
Cat. 5E
LSA+ & 110Connect compatible connecting
blocks
Termination also with 5 Pair tool supported
Universal wiring – T568 A or B wiring pattern
Replacement labels and clear label covers
on page 117
●
●
●
●
●
Color: black
No. of Ports
Height
Part Number
12
mounts vertically
0-0406390-1
24
1U
0-0406330-1
48
2U
0-0406331-1
96
4U
0-0406332-1
Cat. 5E – Inclined 6Block Patch Panel with Rear Cable Management
Product Facts:
●
19, 1 U, RJ-45 Patch Panel with 24 ports
●
Cat. 5E
With rear cable management
Inclined design for ergonomic termination
LSA+ & 110Connect compatible connecting blocks
Termination also with 5 Pair tool supported
Universal wiring – may be terminated
to T568A or T568B
Replacement labels and clear label covers
on page 117
●
●
●
●
●
●
Color: black
Description
Part Number
Cat. 5E – inclined PCB patch panel with rear cable management
0-0336647-1
Cat. 3 – PCB Patch Panels for Telephone Applications
Product Facts:
●
●
●
●
●
●
12
Description
Active Pins
Color
Part Number
50 port panel
3-4-5-6
light grey (RAL 7035)
0-1394060-1
50 port panel
3-4-5-6
black (RAL 9005)
0-1394060-2
50 port panel
3-4-5-6
green (RAL 6032)
0-1394060-4
50 port panel
1-2-4-5
black (RAL 9005)
0-1394060-5
50 port panel
4-5-7-8
black (RAL 9005)
0-1394060-6
http://www.ampnetconnect.com/EMEA
19, 1 U, telephone panel with 50 ports
With rear cable management
LSA+ compatible connecting blocks
Connecting blocks for conductor diameter range
of 0.4–0.65 mm
3 holders for additional cable strain relief
(comfort)
Additional options for active pin presentation
allow full PBX support
Patch Panels
Product Facts:
●
●
●
24 port angled patch panel in low profile design
Allows installation within an enclosed cabinet
environment
Panels are supplied with connectivity (24 Jacks)
Description
Part Number
Hi-D patch panel with 24 Cat. 6 SL UTP Jacks
1-1671079-1
Hi-D patch panel with 24 Cat. 5E SL UTP Jacks
1-1671079-3
Flushmount AMPTRAC Ready! Patch Panel (unloaded)
Product Facts:
●
●
●
●
●
19 unloaded flushmount patch panel to be equipped
with different SlimLine jacks (see below)
AMPTRAC Ready! version:
prepared for AMPTRAC upgrade
Full AMPTRAC version:
fully equipped with AMPTRAC functionality
Hosts up to 24 SL Jacks
AMPTRAC functionality not applicable for jacks with dustcover
Description
Color
Part Number
Full AMPTRAC Unloaded flushmount panels
black (RAL 9005)
0-1711278-1
AMPTRAC Ready! unloaded flushmount panels
black (RAL 9005)
0-1711278-2
AMPTRAC Ready! unloaded flushmount panels
light grey (RAL 7035) 0-1711278-3
I/O Upgrade Kit from AMPTRAC Ready! to Full AMPTRAC black
0-1711148-1
Flushmount Patch Panels (unloaded)
Product Facts:
●
●
●
19 Standard Modular unloaded panel to be equipped
with different modular jacks (see below)
Including VDE 0100 ground clamp
Ports are iconable (see page 115)
-X
Color
-1
-2
-3
-4
black (RAL 9005)
grey (RAL 7032)
creme white (RAL 9001)
light grey (RAL 7035)
16-Port-Panel
No. of Ports
Height
Part Number
16
1U
0-0336525-X
24 (for SL Jacks only)
1U
0-0336526-X
Unshielded Twisted Pair Cabling
Angled Modular Patch Panel (loaded)
24-Port-Panel
The Panels above are to be equipped with the following Modular Jacks (see also Page 20/21):
SL 110Connect Jack
110Connect Jack
SL Toolless Jack
http://www.ampnetconnect.com/EMEA
13
MRJ-21 Connector System
Unshielded Twisted Pair Cabling
MRJ-21 Snap-In Cassette
Product Facts:
●
●
●
●
●
High-performance copper cabling for guaranteed
application performance
High-density, small form factor connectivity
Factory terminated and tested solution
Modular, pluggable solution
Application specific cassettes
Color: black
Description
MRJ-21 Plugs
RJ-45 Ports
Part Number
Snap-In Cassette for 100Base-T
1
12
0-1479452-1
Snap-In Cassette for 1000Base-T
1
6
0-1479459-1
19“ Frontplate panel 1 U for 3 Cassettes
–
–
0-1479451-1
MRJ-21 Patch Panel, 1 U, Angled
Product Facts:
●
●
●
●
●
●
●
High-performance copper cabling for guaranteed
application performance
High-density, small form factor copper connector interface
Angled panel with 48 ports on 1 U
Available with AMPTRAC functionality
Factory terminated and tested solution
Modular, pluggable solution
Angled panel with 140 mm protrusion
Color: black
Description
MRJ-21 Plugs
RJ-45 Ports
Part Number
Standard angled panel for 1000Base-T
8
48
0-1777052-1
AMPTRAC angled panel for 1000Base-T
8
48
0-1777053-1
MRJ-21 Patch Panel, 1 U, Straight
Product Facts:
●
●
●
●
●
●
High-performance copper cabling for guaranteed
application performance
High-density, small form factor copper connector interface
Straight panel with 24 or 48 ports on 1 U
Available with AMPTRAC functionality
Factory terminated and tested solution
Modular, pluggable solution
Color: black
Description
14
http://www.ampnetconnect.com/EMEA
MRJ-21 Plugs
RJ-45 Ports
Part Number
Standard straight panel for 1000Base-T
4
24
0-1777029-1
AMPTRAC straight panel for 1000Base-T
4
24
0-1777029-2
Standard straight panel for 100Base-T
4
48
0-1435965-1
AMPTRAC straight panel for 100Base-T
4
48
0-1777042-1
Standard straight panel for 1000Base-T
8
48
0-1435971-1
AMPTRAC straight panel for 1000Base-T
8
48
0-1777041-1
MRJ-21 Connector System
Product Facts:
●
●
●
●
●
●
●
Factory terminated and tested solution
Modular, pluggable solution
Dense CHAMP style double blade design with offset jackscrew
Contact layout and footprint for differential pairs creates reduced crosstalk
and built-in compension
1,5 to 4 times the port density of 2 x 6 Stacked Mod Jack (RJ-45)
3 times the port density of an RJ-21
Jackscrew for positive latching
and secure cable retention
Color: grey
Description
MRJ-21 to MRJ-21, 180° back shell
Part Number
Y- -X Length
Y- -X Length
Y-1499515-X
01112-
23345-
-5
-0
-5
-7
-0
5,0
10,0
15,0
17,0
20,0
m
m
m
m
m
-5
-0
-5
-0
-0
25,0
30,0
35,0
40,0
50,0
m
m
m
m
m
Other lengths on request!
MRJ-21 to RJ-21 Cable Assemblies
Product Facts:
●
●
●
●
●
●
Factory terminated and tested solution
Modular, pluggable solution
Dense CHAMP style double blade design with offset screw fixing
Contact layout and footprint for differential pairs creates reduced
crosstalk and built-in compensation
1,5 to 4 times the port density of
2 x 6 Stacked Mod Jack (RJ-45)
Jackscrews for positive latching and
secure cable retention
Color: grey
Description
Part Number
MRJ-21 to RJ-21, 180° back shell
Y-1499516-X
Y- -X Length
Y- -X Length
01112-
23345-
-5
-0
-5
-7
-0
5,0
10,0
15,0
17,0
20,0
m
m
m
m
m
-5
-0
-5
-0
-0
25,0
30,0
35,0
40,0
50,0
m
m
m
m
m
Other lengths on request!
Unshielded Twisted Pair Cabling
MRJ-21 to MRJ-21 Cable Assemblies
MRJ-21 Fanout Cable to Multiple RJ-45 Plugs
Product Facts:
●
●
●
●
●
●
Factory terminated and tested solution
Modular, pluggable solution
Dense CHAMP style double blade design with offset screw fixing
Contact layout and footprint for differential pairs creates reduced
crosstalk and built-in compensation
3 times the port density of an RJ-21
Jackscrews for positive latching and secure cable retention
Color: grey
Description
Part Number
Y- -X Length
Y- -X Length
MRJ-21 to 6 RJ-45 for 1000Base-T, 180° back shell
Y-1499520-X
MRJ-21 to 12 RJ-45 for 100Base-T, 180° back shell
Y-1499521-X
01112-
23345-
-5
-0
-5
-7
-0
5,0
10,0
15,0
17,0
20,0
m
m
m
m
m
-5
-0
-5
-0
-0
25,0
30,0
35,0
40,0
50,0
m
m
m
m
m
Other lengths on request!
http://www.ampnetconnect.com/EMEA
15
CrossConnect (610XC)
Unshielded Twisted Pair Cabling
610XC – Connecting Blocks
Product Facts:
●
●
●
●
●
Cat. 6
Double sided IDC contacts
Terminates AWG 22–24 (solid or stranded) wires
4 or 5 Pair blocks with corresponding colour coding
UL listed
No. of Pairs
Part Number
4 pairs
0-1479245-1
5 pairs
0-1479246-1
610XC – Wiring Blocks with Mounting Legs
Product Facts:
●
●
●
●
●
●
Wiring blocks including mounting legs
Cat. 6
Terminates AWG 22–24 (solid or stranded) wires
Available for 50, 100 or 300 pairs for wall mount applications
Labeling accessories available (see page 118)
UL listed
No. of Pairs
Part Number
50 pairs
0-1479247-1
100 pairs
0-1479248-1
300 pairs
0-1479249-1
610XC – Wiring Blocks without Mounting Legs
Product Facts:
●
●
●
●
●
Wiring blocks without mounting legs
Cat. 6
Terminates AWG 22–24 (solid or stranded) wires
Labeling accessories available (see page 118)
UL listed
No. of Pairs
Part Number
50 pairs
0-1479250-1
100 pairs
0-1479251-1
610XC – 19 Panels
Product Facts:
●
●
●
●
16
http://www.ampnetconnect.com/EMEA
Cat. 6
For installation of 610XC CrossConnect in 19 racks
Cable management panels available as an option (see page 113)
UL listed
No. of Pairs
Height
Part Number
100 pairs
1U
0-1479622-1
200 pairs
2U
0-1479623-1
400 pairs
5U
0-1479624-1
CrossConnect (610XC)
Product Facts:
●
●
●
●
●
●
●
Kits include wiring blocks with mounting legs, connecting blocks
as well as label holders and labels
Cat. 6
Terminates AWG 22–24
Available for 50, 100 or 300 pairs
For 4 and 5 pairs
Labeling accessories available (see page 118)
UL listed
No. of Pairs Wiring Blocks
No. of Pairs Connecting Blocks
Part Number
50 pairs
4 pairs
0-1479252-1
50 pairs
5 pairs
0-1479253-1
100 pairs
4 pairs
0-1479254-1
100 pairs
5 pairs
0-1479255-1
300 pairs
4 pairs
0-1479256-1
300 pairs
5 pairs
0-1479257-1
610XC – CrossConnect Distribution Frame Kits
Product Facts:
●
Easy and fast installation
●
Reduces time for planning and installation of a complete distribution frame
●
Kits include metal back frame, wiring blocks, connecting blocks,
cable management troughs as well as designation strips and
appropriate hardware
●
UL listed
No. of Pairs Wiring Blocks
No. of Pairs Connecting Blocks
Part Number
300 pairs
4 pairs
0-1479258-1
300 pairs
5 pairs
0-1479259-1
900 pairs
4 pairs
0-1479260-1
900 pairs
5 pairs
0-1479261-1
Unshielded Twisted Pair Cabling
610XC – CrossConnect Kits
CrossConnect Patch Cords see Page 25
http://www.ampnetconnect.com/EMEA
17
CrossConnect (110XC)
Unshielded Twisted Pair Cabling
110XC – Connecting Blocks
Product Facts:
●
●
●
●
●
Cat. 5E
Double sided IDC contacts
Terminates AWG 22–26 (solid or stranded) wires
3, 4 or 5 Pair blocks with corresponding colour coding
UL listed
No. of Pairs
Part Number
3 pairs
0-0558400-1
4 pairs
0-0558401-1
5 pairs
0-0558402-1
110XC – Wiring Blocks with Mounting Legs
Product Facts:
●
●
●
●
●
●
Wiring blocks including mounting legs
Cat. 5E
Terminates AWG 22–26 (solid or stranded) wires
Available for 50, 100 or 300 pairs for wall mount applications
Labeling accessories available (see page 118)
UL listed
No. of Pairs
Part Number
50 pairs
0-0558841-1
100 pairs
0-0558842-1
300 pairs
0-0558843-1
110XC – Wiring Blocks without Mounting Legs
Product Facts:
●
●
●
●
●
Wiring blocks without mounting legs
Cat. 5E
Terminates AWG 22–26 (solid or stranded) wires
Labeling accessories available (see page 118)
UL listed
No. of Pairs
Part Number
50 pairs
0-0558839-1
100 pairs
0-0558840-1
110XC – 19 Panels
Product Facts:
●
●
●
●
18
http://www.ampnetconnect.com/EMEA
Cat. 5E
For installation of 110XC CrossConnect in 19 racks
Cable management panels available as an option (see page 113)
UL listed
No. of Pairs
Height
Part Number
100 pairs
1U
0-0558635-1
200 pairs
2U
0-0558637-1
400 pairs
5U
0-0558639-1
CrossConnect (110XC)
Product Facts:
●
●
Kits include wiring blocks with mounting legs, connecting blocks
as well as label holders and labels
UL listed
No. of Pairs Wiring Blocks
No. of Pairs Connecting Blocks
Part Number
50 pairs
3 & 4 pairs
0-0569432-1
50 pairs
4 & 5 pairs
0-0569433-1
50 pairs
5 pairs
0-0569434-1
100 pairs
3 & 4 pairs
0-0569438-1
100 pairs
4 & 5 pairs
0-0569439-1
100 pairs
5 pairs
0-0569440-1
300 pairs
3 & 4 pairs
0-0569444-1
300 pairs
4 & 5 pairs
0-0569445-1
300 pairs
5 pairs
0-0569446-1
110XC – CrossConnect Distribution Frame Kits
Product Facts:
●
Easy and fast installation
●
Reduces time for planning and installation of a complete distribution frame
●
Kits include metal back frame, wiring blocks, connecting blocks,
cable management troughs as well as designation strips and
appropriate hardware
●
UL listed
No. of Pairs Frames
No. of Pairs Connecting Blocks
Part Number
300 pairs
3 & 4 pairs
0-0569853-1
300 pairs
4 & 5 pairs
0-0569854-1
300 pairs
5 pairs
0-0569855-1
900 pairs
3 & 4 pairs
0-0569856-1
900 pairs
4 & 5 pairs
0-0569857-1
900 pairs
5 pairs
0-0569858-1
Unshielded Twisted Pair Cabling
110XC – CrossConnect Kits
CrossConnect Patch Cords see Page 25
http://www.ampnetconnect.com/EMEA
19
Connectivity
Unshielded Twisted Pair Cabling
SL Series 110Connect Jacks
Product Facts:
Y- -X Color
000000000-
-1
-2
-3
-4
-5
-6
-7
-8
-9
beige
black
white
grey
orange
blue
red
yellow
green
●
SlimLine (SL) Series: Thin profile improves outlet density
●
Cat. 6 Pyramid Tested (see page 127)
●
Jacks available with integral dust covers
●
90° or 180° cable dress for easy termination
●
Universal wiring label permits wiring to T568A or T568B
●
Bend-limiting strain relief included
●
UL listed
Description
Wiring pattern
Part Number
Cat. 6
T568A/T568B
0-1375055-X
Cat. 6 with dust cover
T568A/T568B
0-1375187-X
Cat. 5E
T568A/T568B
0-1375191-X
Cat. 5E with dust cover
T568A/T568B
0-1375190-X
Cat. 3 (6-Pos.)
RJ11C/RJ14C/RJ25C
0-1375192-X
Cat. 3 (6-Pos.) with dust cover
RJ11C/RJ14C/RJ25C
0-1375193-X
Cat. 6 RJ-45 Jacks
Cat. 5E RJ-45 Jacks
Cat. 3 RJ-11 Jacks
SL Series Toolless Jacks
Product Facts:
Y- -X Color
000000000-
-1
-2
-3
-4
-5
-6
-7
-8
-9
beige
black
white
grey
orange
blue
red
yellow
green
●
SlimLine (SL) Series: Thin profile improves outlet density
●
Cat. 5E
●
Terminate with common pliers
●
Hinged stuffer cap simplifies assembly
●
Jacks available with integral dust covers
●
Universal wiring label permits wiring to T568A or T568B
●
UL listed
Description
Wiring pattern
Part Number
Cat. 5E
T568A/T568B
0-1116604-X
Cat. 5E with dust cover
T568A/T568B
0-1339189-X
Cat. 3 (6-Pos.)
RJ11C/RJ14C/RJ25C
0-1116603-X
Cat. 3 (6-Pos.) with dust cover
RJ11C/RJ14C/RJ25C
0-1339188-X
Cat. 5E Jacks
Cat. 3 Jacks
For Faceplates see Chapter 5 (page 93)
20
http://www.ampnetconnect.com/EMEA
Connectivity
Product Facts:
●
Cat. 5E
●
Universal wiring label permits wiring to
T568A or T568B
●
Y- -X Color
000000000-
UL listed
Description
-1
-2
-3
-4
-5
-6
-7
-8
-9
beige
black
white
grey
orange
blue
red
yellow
green
Wiring pattern
Part Number
T568A/T568B
0-0406372-X
Cat. 3 (8-Pos.)
T568A/T568B
0-0406373-X
Cat. 3 (6-Pos.)
RJ11C/RJ14C/RJ25C
0-0406375-X
Cat. 5E RJ-45 Jacks
Cat. 5E
Cat. 3 RJ-45 and RJ-11 Jacks
Modular Telephone-Couplers
Product Facts:
●
●
●
Straight or angled Cat. 3 telephone coupler
SL Series, fits into all faceplates
Connects either 2 RJ-45 (8 pos.) or 2 RJ-11 (6 pos.) plugs
Color: black
Description
Cable Exit
Part Number
RJ-45 Coupler (8 pos.)
straight (180°)
0-0555052-1
RJ-45 Coupler (8 pos.)
angled (90°)
0-0555051-1
RJ-11 Coupler (6 pos.)
straight (180°)
0-0555050-1
RJ-11 Coupler (6 pos.)
angled (90°)
0-0555049-1
EtherSeal Jack and Coupler Kits
Unshielded Twisted Pair Cabling
Standard 110Connect Jacks
Product Facts:
●
●
●
●
●
●
●
Category 6 or 5E and IP67 compliant, unshielded
Traditional 110 tool and toolless versions
Front-loading into enclosures and outlets
Push-On and Twist Off Mating Action
Blind mate with Polarized Keying
Tactile feedback confirms full mating
Optional Outlet Cap with tether available
Description
Part Number
Cat. 6 SL Series 110Connect Modular Jack Kit
0-1479565-2
Cat. 5E SL Series 110Connect Modular Jack Kit
0-1479563-2
Cat. 5E SL Series Toolless Modular Jack Kit
0-1479561-2
Cat. 5E SL Series In-Line Coupler Kit
0-1479599-2
Jack/Outlet Cap
0-1479591-2
For Faceplates see Chapter 5 (page 93)
http://www.ampnetconnect.com/EMEA
21
Outlets
Unshielded Twisted Pair Cabling
Cat. 6 Low Profile Jacks (British Standard)
Product Facts
●
●
●
●
Fixed wired RJ-45 Outlet
Cat. 6 Pyramid Tested (see page 127)
With integrated shutter
Corresponding BS 50 mm mounting frame available (see page 98)
Color: signal white (RAL 9003)
Description
Part Number
Cat. 6 Low Profile Jack 25 x 50 mm
0-0336633-1
Cat. 6 Low Profile Jack LJ6C
0-0336631-1
Cat. 5E Low Profile Jacks (British Standard)
Product Facts
●
●
●
●
Fixed wired RJ-45 Outlet
Cat. 5E
With integrated shutter
Corresponding BS 50 mm mounting frame available (see page 98)
Color: signal white (RAL 9003)
Description
Part Number
Cat. 5E Low Profile Jack 25 x 50 mm
0-1339044-1
Cat. 5E Low Profile Jack LJ6C
0-1339042-1
Cat. 5E Outlet-Kit 110Connect (DIN)
Product Facts
●
●
●
●
DIN Flushmount kit incl.
1 or 2 Standard 110Connect jacks
Cat. 5E
With integrated shutters
With labeling field
Y-
Color
02-
almond (RAL 1013)
pure white (RAL 9010)
Description
Part Number
Cat. 5E 1port-outlet
Y-0966106-5
Cat. 5E 2port-outlet
Y-0966105-5
Cat. 5E Dual Outlet 45 x 45 mm “Mosaic”
Product Facts
●
●
●
●
●
●
Hard wired dual RJ-45 Outlet unshielded
Cat. 5E
Compatible to “Mosaic”
With integrated shutters
Side cable exit
Individual ports are icon-able (see page 115)
Color: pure white (RAL 9010)
22
http://www.ampnetconnect.com/EMEA
Description
Part Number
Cat. 5E Dual Outlet 45 x 45 mm “Mosaic”
0-0284232-1
Patch Cords
Product Facts:
●
●
●
●
●
Category 6 according to ISO/IEC 11801 2nd Ed. and EN-50173-1
4 Pair stranded U/UTP cable
LSZH sheath
Color-matched snagless boots
Universal wiring
Color
Part Number
Y- -X Length
white
Y-1711091-X
blue
Y-1711094-X
grey
Y-1711093-X
yellow
Y-1711097-X
100001-
red
Y-1711096-X
green
Y-1711095-X
-1 0,5
-1 1,0
-2 2,0
-3 3,0
-5 5,0
-0 10,0
m
m
m
m
m
m
Other lengths and
colors on request!
Cat. 6 Patch Cord RJ-45 PVC (white)
Product Facts:
●
●
●
●
●
●
Category 6 according to ISO/IEC 11801 2nd Ed.
4 Pair stranded U/UTP cable AWG 24
Snagless boots
Universal wiring
PVC sheath
UL listed
Color
Part Number
white
Y-1499001-X
Y- -X Length
000001-
-9 0,5
-5 1,0
-6 2,0
-7 3,0
-8 5,0
-1 10,0
m
m
m
m
m
m
Other lengths
on request!
Cat. 6 Patch Cord RJ-45 PVC (colored)
Unshielded Twisted Pair Cabling
Cat. 6 Patch Cord RJ-45 LSZH
Product Facts:
●
●
●
●
●
●
Category 6 according to ISO/IEC 11801 2nd Ed.
4 Pair stranded UTP cable AWG 24
Color-matched snagless boots
Universal wiring
PVC sheath
UL listed
Color
Part Number
Y- -X Length
blue
Y-0219886-X
grey
Y-0219885-X
yellow
Y-0219890-X
red
Y-0219888-X
000113-
green
Y-0219887-X
-2
-3
-7
-0
-6
-0
0,6
0,9
2,1
3,0
4,9
9,1
m
m
m
m
m
m
Other lengths and
colors on request!
http://www.ampnetconnect.com/EMEA
23
Patch Cords
Unshielded Twisted Pair Cabling
Cat. 5E Patch Cord RJ-45 LSZH
Product Facts:
●
●
●
●
●
Category 5E according to ISO/IEC 11801 2nd Ed. and EN-50173-1
4 Pair stranded U/UTP cable
LSZH sheath
Color-matched snagless boots
Universal wiring
Color
Part Number
Y- -X Length
white
Y-1644076-X
blue
Y-1711035-X
grey
Y-1711038-X
yellow
Y-1711037-X
100001-
red
Y-1711028-X
green
Y-1711034-X
-1 0,5
-1 1,0
-2 2,0
-3 3,0
-5 5,0
-0 10,0
m
m
m
m
m
m
Other lengths and
colors on request!
Cat. 5E Patch Cord RJ-45 PVC (white)
Product Facts:
●
●
●
●
●
●
Category 5E according to ISO/IEC 11801 2nd Ed.
4 Pair stranded U/UTP cable AWG 24
Snagless boots
Universal wiring
PVC sheath
UL listed
Color
Part Number
white
Y-0941761-X
Y- -X Length
000001-
-9 0,5
-5 1,0
-6 2,0
-7 3,0
-8 5,0
-1 10,0
m
m
m
m
m
m
Other lengths
on request!
Cat. 5E Patch Cord RJ-45 PVC (colored)
Product Facts:
●
●
●
●
●
●
24
http://www.ampnetconnect.com/EMEA
Category 5E according to ISO/IEC 11801 2nd Ed.
4 Pair stranded U/UTP cable AWG 24
Color-matched snagless boots
Universal wiring
PVC sheath
UL listed
Color
Part Number
Y- -X Length
blue
Y-0219242-X
grey
Y-0219241-X
yellow
Y-0219246-X
red
Y-0219244-X
000113-
green
Y-0219243-X
-2
-3
-7
-0
-6
-0
0,6
0,9
2,1
3,0
4,9
9,1
m
m
m
m
m
m
Other lengths and
colors on request!
Patch Cords
Product Facts:
●
●
●
●
Patch cord 610XC to RJ-45 Cat. 6
4 Pair stranded U/UTP cable, AWG 24 conductors, universal wiring
PVC sheath
UL listed
Color: black
Y- -X Length
00001-
-2
-4
-6
-8
-0
0,6
1,2
1,8
2,4
3,0
m
m
m
m
m
Description
Wiring pattern
Part Number
4 pairs 610XC to RJ-45
T568A
Y-1499414-X
4 pairs 610XC to RJ-45
T568B
Y-1499413-X
Cat. 6 610XC to 610XC Patch Cord
Product Facts:
●
●
●
●
Patch cord 610XC to 610XC Cat. 6
4 Pair stranded U/UTP cable, AWG 24 conductors, universal wiring
PVC sheath
UL listed
Color: black
Y- -X Length
00001-
-2
-4
-6
-8
-0
0,6
1,2
1,8
2,4
3,0
m
m
m
m
m
Description
Part Number
1 pair 610XC to 610XC
Y-1479265-X
2 pairs 610XC to 610XC
Y-1479266-X
4 pairs 610XC to 610XC
Y-1479267-X
Cat. 5E 110XC to RJ-45 Patch Cord
Product Facts:
●
●
●
●
Patch cord 110XC to RJ-45 Cat. 5E
4 Pair stranded U/UTP cable, AWG 24 conductors, universal wiring
PVC sheath
UL listed
Color: grey
Y- -X Length
00001-
-2
-4
-6
-8
-0
0,6
1,2
1,8
2,4
3,0
m
m
m
m
m
Description
Wiring pattern
Part Number
2 pairs 110XC to RJ-45
T568A/10BASE-T
Y-0569685-X
2 pairs 110XC to RJ-45
T568B/10BASE-T
Y-0569669-X
4 pairs 110XC to RJ-45
T568A
Y-0569527-X
4 pairs 110XC to RJ-45
T568B
Y-0569528-X
Unshielded Twisted Pair Cabling
Cat. 6 610XC to RJ-45 Patch Cord
Cat. 5E 110XC to 110XC Patch Cord
Product Facts:
●
●
●
●
Patch cord 110XC to 110XC Cat. 5E
4 Pair stranded U/UTP cable, AWG 24 conductors, universal wiring
PVC sheath
UL listed
Color: grey
Y- -X Length
00001-
-2
-4
-6
-8
-0
0,6
1,2
1,8
2,4
3,0
m
m
m
m
m
No. of Pairs
Part Number
1 pair 110XC to 110XC
Y-0569523-X
2 pairs 110XC to 110XC
Y-0569524-X
3 pairs 110XC to 110XC
Y-0569525-X
4 pairs 110XC to 110XC
Y-0569526-X
http://www.ampnetconnect.com/EMEA
25
Patch Cords
Unshielded Twisted Pair Cabling
Consolidation Point Transition Cable Assemblies
26
Product Facts:
●
●
●
●
●
●
●
●
Unshielded Twisted Pair Cable Assemblies
Save time and money on moves adds and changes
Performance according to ISO/IEC 11801 2nd Ed. and EN-50173-1
Form connections between work area outlet and consolidation point
SL Series 110Connect Jack to modular plug
Solid wire cable
Y- -X Length
LSZH cable sheath
0- -5
5,0 m
1- -4
7,5 m
Universal wiring
Color: white
1- -0
1- -5
2- -0
10,0 m
15,0 m
20,0 m
Performance
Part Number
Category 6
Y-1711027-X
Category 5E
Y-1711040-X
EtherSeal Cat. 5E Patch Cord
Product Facts:
●
●
●
●
●
●
●
●
Category 5E and IP67 compliant
Unshielded cable assembly
Utilizes EtherSeal, industrial grade Cat. 5E cable
Factory-terminated and tested for quality
Push-On and Twist Off Mating Action
Blind mate with Polarized Keying
Tactile feedback confirms full mating
Optional Plug Cap with available tether
Color: grey
http://www.ampnetconnect.com/EMEA
Y- -X Length
00011-
-3
-5
-7
-0
-5
0,9
1,5
2,1
3,0
4,5
m
m
m
m
m
Description
Part Number
EtherSeal to EtherSeal
Y-1479601-X
EtherSeal to Standard RJ-45
Y-1479602-X
Plug Cap with Tether
0-1479592-2
Shielded Twisted Pair (STP) Cabling Systems
2.
● Optimized EMC and transmission quality based on various
shielding technologies (PiMF, S-FTP, FTP), maximized
bandwith for copper cabling systems
● Complete systems (system cables, patch panels,
wall outlets, patch cords)
● Available from Cat. 5E to Cat. 7:
– Cat. 7: 600/1000 MHz bandwith, maximum
future proof, most sophisticated services
like 10 Gigabit Ethernet, 1000Base-TX2,
CATV and multi-media
– Cat. 6/6A: 250/500 MHz high end
connecting hardware,
Pyramid Tested according to latest
de-embedded test standards,
supports 10 Gigabit Ethernet
– Cat. 5/5E: proven 100 MHz technology, cost efficient, supports
Gigabit Ethernet (1000Base-T)
● Patch panels and wall outlets are either
PCB-based or with Keystone Jacks
● AMP CO Plus System
– modular and flexible
– sheath sharing
– all possible services and interfaces
Shielded
Twisted Pair (STP)
Cabling Systems
System Cables
28
Patch Panels
30
Connectivity
33
Wall Outlets (hard wired)
42
Patch Cords
46
System Cables
Shielded Twisted Pair Cabling
PiMF 1200 MHz Cable
Product Facts:
●
●
●
●
●
1200 MHz high performance S/FTP cable
Enables broadband applications like CATV, multi-media etc
Individually shielded pairs (aluminium foil) plus overall copper braid
AWG 22 or 23 solid conductor
For more
LSZH sheath material
Information
see page 127
Color: white
AWG
Type
OD
Packaging
Part Number
22
Simplex
8,1 mm
1000 m/Reel
0-1499101-1
23
Simplex
8,0 mm
1000 m/Reel
0-1499102-1
22
Duplex
2 x 8,1 mm
500 m/Reel
0-1711003-1
23
Duplex
2 x 8,0 mm
500 m/Reel
0-1711004-1
Cat. 7 PiMF 600 MHz Cable
Product Facts:
●
●
●
●
600 MHz Cat. 7 S/FTP cable
Individually shielded pairs (aluminium foil) plus overall copper braid
AWG 23 solid conductor
LSZH sheath material
For more
Information
see page 127
Color: white
AWG
Type
OD
Packaging
Part Number
23
Simplex
7,8 mm
1000 m/Reel
0-0057893-1
23
Duplex
2 x 7,8 mm
500 m/Reel
0-1711005-1
Cat. 7 PiMF COMPACT 600 MHz Cable
Product Facts:
●
●
●
●
●
600 MHz Cat. 7 F/FTP cable
Compact Cat. 7 compliant shielded cable
Individually foiled pairs plus overall foil shield
AWG 23 solid conductor
LSZH sheath material
For more
Information
see page 127
Color: white
AWG
Type
OD
Packaging
Part Number
23
Simplex
7,0 mm
1000 m/Reel
0-1711163-2
23
Simplex
7,0 mm
500 m/Reel
0-1711163-1
Cat. 6 PiMF COMPACT 250 MHz Cable
Product Facts:
●
●
●
●
●
250 MHz Cat. 6 F/FTP cable
Compact Cat. 6 compliant shielded cable
Individually foiled pairs plus overall foil shield
AWG 23 solid conductor
LSZH sheath material
Color: white
28
http://www.ampnetconnect.com/EMEA
AWG
Type
OD
Packaging
Part Number
23
Simplex
7,4 mm
500 m/Reel
0-1711007-1
23
Duplex
2 x 7,4 mm
500 m/Reel
0-1711008-1
System Cables
Product Facts:
●
●
●
●
100 MHz Cat. 5E SF/UTP cable
Overall copper braid plus foil shield
Very low delay skew, suitable for 1000Base-T
AWG 24 solid conductor
Color: white
Sheathing
Type
OD
Packaging
Part Number
LSZH
Simplex
6,5 mm
1000 m/Reel
0-0219484-1
LSZH
Simplex
6,5 mm
500 m/Reel
0-0219484-2
Cat. 5E F/UTP 100 MHz Cable
Product Facts:
●
●
●
●
100 MHz Cat. 5E F/UTP cable
Overall foil shield
Very low delay skew, suitable for 1000Base-T
AWG 24 solid conductor
Color: white
-X
Packaging
-2
-3
305 m, Pullbox
1000 m, Reel
Sheathing
Type
OD
Packaging
Part Number
LSZH
Simplex
6,2 mm
see table
0-0219420-X
LSZH
Duplex
2 x 6,2 mm
500 m/Reel
0-0136816-1
PVC
Simplex
6,2 mm
see table
0-0219413-X
EtherSeal Cat. 5E SF/UTP 100 MHz Cable
Shielded Twisted Pair Cabling
Cat. 5E SF/UTP 100 MHz Cable
Product Facts:
●
●
●
●
●
●
Meets or exceeds TIA/EIA and ISO Category 5E specifications
Exceeds all requirements for Gigabit Ethernet
Sunlight (UV) resistant for harsh environments
Oil resistant, Level II
Double jacketed – PVC (only stranded conductors)
CMR (Riser) rated
Color: grey
Conductors
No. of Sheaths
OD
Packaging
Part Number
Solid
1
6,35 mm
305 m/Reel
0-1499449-3
Stranded
2
7,26 mm
305 m/Reel
0-1499450-3
http://www.ampnetconnect.com/EMEA
29
Patch Panels
Shielded Twisted Pair Cabling
AMP CO Plus 8 Port Patch Panel
Product Facts:
● 19 patch panel for 8 inserts
● Performance up to 2,0 GHz
● Straight cable exit plus management bar
● Kit includes 8 shielded housings, edge connectors,
frames and mounting material incl. grounding bolt
Type
Height
Color
Part Number
Standard
Standard
1U
light grey (RAL 7035)
0-1394576-1
1U
black (RAL 9005)
0-1394576-3
With label arrays
1,5 U
pure white (RAL 9010)
7-0101022-6
AMP CO Plus 16 Port Patch Panel
Product Facts:
19 patch panel for 16 inserts
● Performance up to 2,0 GHz
● Straight cable exit plus management bar
● Kit includes 16 shielded housings,
edge connectors, frames and
mounting material incl. grounding bolt
●
Type
Height
Color
Part Number
Standard
Standard
2U
light grey (RAL 7035)
0-1394573-1
2U
black (RAL 9005)
0-1394573-3
With label arrays and management bar
3U
pure white (RAL 9010) 7-0101022-3
With label arrays, without management bar
3U
pure white (RAL 9010) 7-0101022-4
AMP CO Plus 32 Port Patch Panel
Product Facts:
19 patch panel for 32 inserts
● Performance up to 2,0 GHz
● Straight cable exit plus management bar
● Kit includes 32 shielded housings,
edge connectors, frames and
mounting material incl. grounding bolt
●
Type
Height
Color
Part Number
Standard
Standard
4U
light grey (RAL 7035)
0-1394575-1
4U
black (RAL 9005)
0-1394575-3
With label arrays
5U
pure white (RAL 9010)
7-0101022-1
AMP CO Plus 24 Port High Density Patch Panel
Product Facts:
19 patch panel for 24 inserts
● Performance up to 2,0 GHz
● Straight cable exit plus management bar
● Kit includes 12 shielded dual housings and frames,
24 edge connectors plus mounting material incl. grounding bolt
●
Type
Height
Color
Part Number
Standard
Standard
2U
light grey (RAL 7035)
0-1394574-1
2U
black (RAL 9005)
0-1394574-3
Housing protection kit
2U
silver
E41188-000
For necessary inserts see page 33 ff
For compatible labeling products etc. see page 115
30
http://www.ampnetconnect.com/EMEA
Patch Panels
Product Facts:
●
●
●
●
●
●
●
●
●
●
●
●
19, 1 U, RJ-45 Patch Panel with 24 ports
AMPTRAC Ready! version:
prepared for AMPTRAC upgrade
Full AMPTRAC version:
fully equipped with AMPTRAC functionality
Cat. 6 Pyramid Tested (see page 127)
Up to 10 GBit/s
LSA+ tool compatible enhanced 110 IDC blocks
Rear cable management
Cover adapts to different cable diameters via variable
snap-in position
Shield connection separated from strain relief
VDE grounding bolt
Universal wiring – T568 A or B wiring pattern
Protected PCB
For more
Information
see page 127
Description
Color
Part Number
Cat. 6 Full AMPTRAC patch panel
black (RAL 9005)
0-1644042-1
Cat. 6 AMPTRAC Ready! patch panel
black (RAL 9005)
0-1644042-2
Cat. 6 AMPTRAC Ready! patch panel
light grey (RAL 7035) 0-1644042-3
I/O Upgrade Kit from AMPTRAC Ready! to Full AMPTRAC black
0-1711148-1
Cat. 5E – Patch Panels with Rear Cable Management
Product Facts:
●
●
●
●
●
●
●
●
19, 1 U, RJ-45 Patch Panel with 24 ports
Cat. 5E
LSA+ tool compatible enhanced 110 IDC blocks
Cover adapts to different cable diameters via
variable snap-in position
Shield connection separated from strain relief
VDE grounding bolt
T568 A or B wiring pattern
Protected PCB
Description
Part Number
Cat. 5E patch panel 24 Port
0-0336671-X
-X
Color
-1
-2
-3
pebble grey (RAL 7032)
black (RAL 9005)
light grey (RAL 7035)
Shielded Twisted Pair Cabling
Cat. 6 – AMPTRAC Ready! Patch Panel
For UTP Cat. 3 telephone panels see page 12
http://www.ampnetconnect.com/EMEA
31
Patch Panels
Shielded Twisted Pair Cabling
Angled Modular Patch Panel (loaded)
Product Facts:
●
●
●
24 port angled patch panel in low profile design
Allows installation within an enclosed cabinet
environment
Panels are supplied with connectivity (24 Jacks)
Description
Part Number
Hi-D patch panel with 24 AMP-TWIST-6S SL Jacks
1-1671079-2
Flushmount AMPTRAC Ready! Patch Panel (unloaded)
Product Facts:
●
●
●
●
●
19 unloaded flushmount patch panel to be equipped
with different SlimLine jacks (see below)
AMPTRAC Ready! version:
prepared for AMPTRAC upgrade
Full AMPTRAC version:
fully equipped with AMPTRAC functionality
Hosts up to 24 SL Jacks
AMPTRAC functionality not applicable for jacks with
dustcover
Description
Color
Part Number
Full AMPTRAC unloaded flushmount panels
black (RAL 9005)
0-1711278-1
AMPTRAC Ready! unloaded flushmount panels
black (RAL 9005)
0-1711278-2
AMPTRAC Ready! unloaded flushmount panels
light grey (RAL 7035) 0-1711278-3
I/O Upgrade Kit from AMPTRAC Ready! to Full AMPTRAC black
0-1711148-1
Flushmount Patch Panels (unloaded)
Product Facts:
●
●
16-Port-Panel
●
24-Port-Panel
19 Standard Modular unloaded panel to be equipped
with different modular jacks (see below)
Including VDE 0100 ground clamp
Ports are iconable (see page 115)
-X
Color
-1
-2
-3
-4
black (RAL 9005)
grey (RAL 7032)
creme white (RAL 9001)
light grey (RAL 7035)
No. of Ports
Height
Part Number
16
1U
0-0336525-X
24 (for SL Jacks only)
1U
0-0336526-X
The following connectors can be mounted into the panels shown above (see page 41):
AMP-TWIST-6S SL Jack
32
http://www.ampnetconnect.com/EMEA
SL 110Connect Jack
110Connect Jack
SL Toolless Jack
Connectivity
3
5
6
8
7
3T
3R
4T
4R
4
2R
2
1
2T
PR
0-0336480-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
1T
Insert Cat. 7 TERA™
-X
J1
Part Number
PR
Pin out: EIA/TIA 568A; 8 pins, shielded
Type
Shield
PR
●
Exchangeable system insert 1 x ISO Cat. 7 (Siemon TERA™)
Cat. 7/Class F
For more
Application: all applications incl. Gigabit
Information
see page 127
and 10 Gigabit Ethernet
P1
●
PR
●
1R
Product Facts:
TERA™ is a Trademark
of the Siemon Company
Type
Part Number
Insert 2 x RJ-45 Cat. 7
0-0336556-X
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
7
8
6
5
4
3
8
7
6
5
4
PR
PR
8
6
2
7
5
1
3
PR
4
2
Shield
Pin out: 12,78 + 12,78; 2 x 4 pins, shielded
3
●
Exchangeable system insert 2 x RJ-45
Cat. 7/Class F
(pair 12,78 according E DIN 44312-5)
Application: 2 x ATM 622 MBit/s or
Gigabit Ethernet 1000 Base-TX2
1
●
PR
●
2
Product Facts:
1
AMP CO Plus Cat. 7 Dual RJ-45 Insert, Two Pairs
AMP CO Plus Broadband Insert for CATV
Product Facts:
●
●
Shielded Twisted Pair Cabling
AMP CO Plus TERA™ Cat. 7 Insert for All Applications (incl. 10 Gigabit Ethernet)
Exchangeable system insert with F-Series connector and 1 or 2 RJ-45
Application: 1 x CATV + 1 x Ethernet/ISDN or
1 x CATV + 1 x Ethernet + 1 x ISDN
Pin out: Balun 75Ω + 12,36,45; shielded (1 x RJ-45) or
Balun 75Ω + 12,36 + 45; shielded (2 x RJ-45)
Type
Part Number
-X
Color
Insert F-Series + 1 x RJ-45
0-0336684-X
Insert F-Series + 2 x RJ-45
0-1711336-X
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
For accessories and tools see pages 103 and 104
http://www.ampnetconnect.com/EMEA
33
Connectivity
8
7
4
2
1
3
6
PR
P1
Product Facts:
Exchangeable system insert 1 x RJ-45
Cat. 6 Pyramid Tested (s.p. 127) / Class E
Application: 1 x all applications incl. Gigabit Ethernet
1000 Base-T, 1000 Base-TX or 1,2 GBit ATM, 10 GBit Ethernet
PR
●
Shield
●
PR
PR
●
8
7
6
5
4
3
2
1
J1
Pin out: EIA/TIA 568 A: 8 pins, shielded
For more
Information
see page 127
-X
Color
Type
Part Number
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
Insert 1 x RJ-45 Cat. 6
0-0336548-X
Insert 1 x RJ-45 10 GBE
0-1711188-X
8
7
6
5
4
3
2
1
AMP CO Plus Cat. 6 Dual RJ-45 Insert for Fast Ethernet
P1
Product Facts:
●
Shield
PR
PR
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
J1
●
Exchangeable system insert 2 x RJ-45
Cat. 6 Pyramid Tested (s.p.127) / Class E
Application:
2 x Fast Ethernet 100 Base-TX
Pin out:
12,36 + 12,36; 2 x 4 pins, shielded
J2
PR
PR
●
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
Type
Part Number
Insert 2 x RJ-45 Cat. 6 Ethernet
0-0336553-X
8
7
6
5
4
1
2
P1
3
AMP CO Plus Cat. 6 Dual RJ-45 Insert for Fast Ethernet + Voice/Data
Product Facts:
●
Shield
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
●
Exchangeable system insert 2 x RJ-45
Cat. 6 Pyramid Tested (s.p.127) / Class E
Application:
1 x Fast Ethernet 100 Base-TX,
1 x ISDN, xDSL or Token Ring
Pin out:
36,45 + 12,36 ; 2 x 4 pins, shielded
J2
PR
PR
PR
PR
●
J1
Shielded Twisted Pair Cabling
5
AMP CO Plus Cat. 6 RJ-45 Insert for All Applications (incl. 10 Gigabit Ethernet)
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
Type
Part Number
Insert 2 x RJ-45 Cat. 6 mixed
0-0336549-X
P1
AMP CO Plus Cat. 6 Dual RJ-45 Insert for Voice/Data
Product Facts:
PR
PR
●
Shield
PR
PR
●
8
7
6
5
4
3
2
J2
Pin out:
36,45 + 36,45 ; 2 x 4 pins, shielded
1
8
7
6
5
4
3
2
1
J1
●
Exchangeable system insert 2 x RJ-45
Cat. 6 Pyramid Tested (s.p.127) / Class E
Application:
2 x ISDN, xDSL or Token Ring
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
Type
Part Number
Insert 2 x RJ-45 Cat. 6 ISDN
0-0336554-X
For accessories and tools see pages 103 and 104
34
http://www.ampnetconnect.com/EMEA
Connectivity
7
8
8
4
7
2
1
3
4
6
3
PR
6
5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
2
0-0284584-X
Color
-1
-3
-5
1
Insert 1 x RJ-45 Cat. 5E
-X
J1
Part Number
PR
Pin out: EIA/TIA 568 A; 8 pins, shielded
Type
Shield
PR
●
Exchangeable system insert 1 x RJ-45
Cat. 5E / Class D
Application:
1 x all applications incl. Gigabit Ethernet 1000 Base-T
P1
●
PR
●
5
Product Facts:
Type
Part Number
Insert 2 x RJ-45 Cat. 5E Ethernet
0-0183636-X
8
6
2
7
5
1
4
3
Shield
PR
PR
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
8
7
6
5
4
8
3
J2
PR
-X
7
6
5
4
3
1
J1
Pin out:
12,36 + 12,36 ; 2 x 4 pins, shielded
2
●
Exchangeable system insert 2 x RJ-45
Cat. 5E / Class D
Application:
2 x Fast Ethernet 100 Base-TX
PR
●
P1
Product Facts:
●
2
1
AMP CO Plus Cat. 5E Dual RJ-45 Insert for Fast Ethernet
6
7
2
3
8
5
4
1
1
6
Type
Part Number
Insert 2 x RJ-45 Cat. 5E mixed
0-0183641-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
8
7
6
5
8
7
4
3
-X
4
J2
PR
Shield
PR
PR
1
J1
Pin out:
36,45 + 12,36 ; 2 x 4 pins, shielded
2
●
Exchangeable system insert 2 x RJ-45
Cat. 5E / Class D
Application: 1 x Fast Ethernet 100 Base-TX,
1 x ISDN, xDSL or Token Ring
PR
●
5
Product Facts:
●
2
P1
3
AMP CO Plus Cat. 5E Dual RJ-45 Insert for Fast Ethernet + Voice/Data
Shielded Twisted Pair Cabling
AMP CO Plus Cat. 5E RJ-45 Insert for All Applications (incl. Gigabit Ethernet)
Insert 2 x RJ-45 Cat. 5E ISDN
0-0183635-X
6
5
8
5
6
PR
7
4
6
Shield
PR
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
8
7
2
8
1
J2
-X
7
2
1
J1
Part Number
4
1
5
Pin out:
36,45 + 36,45 ; 2 x 4 pins, shielded
Type
3
2
4
●
Exchangeable system insert 2 x RJ-45
Cat. 5E / Class D
Application: 2 x ISDN, xDSL or Token Ring
PR
●
PR
●
3
Product Facts:
3
P1
AMP CO Plus Cat. 5E Dual RJ-45 Insert for Voice/Data
For accessories and tools see pages 103 and 104
http://www.ampnetconnect.com/EMEA
35
Connectivity
8
6
7
5
2
3
1
P1
Shield
Power
Converter
●
●
●
Converts IEEE 802.3af mode A or B
input to mode A output
Uses Power Mux/Demux Technology
Application: 2 x PoE (input mode independent),
e.g. VoIP, over a 4 pair cable (sheath sharing)
8
7
6
3
2
1
5
4
8
7
6
3
2
1
5
4
J1
Power
Converter
Product Facts:
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
Type
Part Number
Insert 2 x PoE Power Conversion
0-1711125-X
AMP CO Plus Dual Patch Panel Insert ISDN/PoE Power Conversion
P1
Product Facts:
J1
Shield
Power
Converter
●
●
●
8
7
6
3
2
1
5
4
8
7
6
3
2
1
5
4
●
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
PoE Port: Converts IEEE 802.3af
mode A or B input to mode A output
ISDN Port: analog telephone or ISDN
Uses Power Mux/Demux Technology
at the PoE Port
Application: 1 x PoE (input mode independent),
e.g. VoIP, and 1 x ISDN over a 4 pair cable
(sheat sharing)
Type
Part Number
Insert ISDN + PoE Power Conversion
0-1711130-X
8
7
6
5
4
3
2
P1
1
AMP CO Plus Dual Insert PoE Mode A
Product Facts:
●
Shield
PR
PR
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
●
2 x PoE IEEE 802.3af Mode A
Used at the outlet
Application: 2 x PoE, e.g. VoIP,
over a 4 pair cable (sheath sharing)
Pin out:
12,36 + 12,36; 2 x 4 pins; shielded
J2
PR
PR
●
J1
Shielded Twisted Pair Cabling
4
AMP CO Plus Dual Patch Panel Insert PoE Power Conversion
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
Type
Part Number
Insert 2 x PoE Mode A
0-1711135-X
8
7
6
5
4
1
2
3
AMP CO Plus Dual Insert ISDN/PoE Mode A
P1
Product Facts:
●
Shield
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
J1
J2
PR
PR
PR
PR
●
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
●
1 x ISDN; 1 x PoE IEEE 802.3af Mode A
Used at the outlet
Application: 1 x PoE, e.g. VoIP, and 1 x ISDN
over a 4 pair cable (sheat sharing)
Pin out:
36,45 + 12,36; 2 x 4 pins; shielded
Type
Part Number
Insert ISDN + PoE Mode A
0-1711140-X
For accessories and tools see pages 103 and 104
36
http://www.ampnetconnect.com/EMEA
Connectivity
Shield
8
7
6
5
4
3
2
1
8
7
6
3
J3
PR
PR
PR
J2
2
1
8
7
6
3
Pin out:
45 + 45 + 12,36; 2 x 2 pins unshielded;
1 x 4 pins shielded
Type
Part Number
Insert 3 x RJ-45
0-1711100-X
-X
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
5
2
4
7
6
1
5
6
7
8
9
2
4
8
1
●
3
●
P1
Product Facts:
J1
AMP CO Plus 4 Pair Sub-D 9pos Insert
Sub-D 9pos insert with 4 connected pairs
Incl. M3 nuts for locking
Description
Part Number
Sub-D insert
0-0183553-1
3
Shield
Color: almond (RAL 1013)
AMP CO Plus Blank Insert
Product Facts:
●
●
Blank insert
Dust protection for unused ports
Description
Part Number
Blank insert
0-0555644-X
-X
Color
-1
-3
-9
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
Shielded Twisted Pair Cabling
8
7
6
3
5
4
5
1
4
2
5
PR
J1
●
Exchangeable system insert 3 x RJ-45
1 x Cat. 6 Pyramid Tested (s. page 127),
2 x Cat. 3
Application:
2 x telephone (2 wire use),
1 x Fast Ethernet 100 Base-TX
2
●
1
●
P1
Product Facts:
4
AMP CO Plus 3-Port Insert
For accessories and tools see pages 103 and 104
http://www.ampnetconnect.com/EMEA
37
Connectivity
Shielded Twisted Pair Cabling
Inserts for Voice Applications
Description
Phone devices in the work area with different
connector types (RJ-11, RJ-45, TAE, TT83 or FT)
can be easily integrated into the system.
In the patch panel, RJ-45 is preferred.
Jack
Shielded
The table below provides an overview of different
insert types for the various applications in the
work area as ISDN, S , UpN, TAE or TT83 and
the corresponding insert on the panel side.
O
Terminated
Use at
Note
Color
-1
-3
-5
almond (RAL 1013)
black (RAL 9005)
pure white (RAL 9010)
Part Number
1x RJ-45
no
no
outlet / panel
panel + outlet
0-0555672-1
1x RJ-45
no
100 Ω
outlet
panel side 0-0555672-1
0-0555681-1
2x RJ-45
no
no
outlet / panel
panel + outlet
0-0183723-1
2x RJ-45
no
no
outlet / panel
for E1 dedicated lines
0-0183725-1
2x RJ-45
no
no
panel
outlet s. 0-0557264-1 or 0-0183482-1
0-0183736-1
2x RJ-45 parallel
no
no
outlet
panel side 0-0555672-1
0-0555648-1
2x RJ-45 parallel
no
100 Ω
outlet
panel side 0-0555672-1
0-0555680-1
2x RJ-45 parallel
yes
no
outlet
panel side 0-0555672-1
0-0555622-1
2x RJ-45 parallel
yes
100 Ω
outlet
panel side 0-0555672-1
0-0555602-1
4x RJ-45
no
no
outlet / panel
panel + outlet
0-1711000-X
4x RJ-45
no
100 Ω
outlet
panel side 0-0183723-1
0-1711001-X
4x RJ-45
no
no
outlet /panel
french version
0-1644016-X
1x RJ-11
no
no
outlet
panel side 0-0555672-1
0-0555611-1
2x RJ-11
no
no
outlet
panel side 0-0183723-1
0-0555614-1
2x TAE NF
no
no
outlet
panel side 0-0183736-1
0-0557264-1
2x TAE FF
no
no
outlet
panel side 0-0183736-1
0-0183482-1
6pos. TT 83
no
no
outlet
different pin outs configurable
5-0101003-0
12pos. TT 83
no
no
outlet
different pin outs configurable
0-0101011-3
8pos. FT
no
no
outlet
french standard
0-0144268-1
For accessories and tools see pages 103 and 104
38
-X
http://www.ampnetconnect.com/EMEA
Connectivity
J1
J1
J1
PR
P1
5
1
6
2
3
3
4
2
5
1
6
7
1
2
PR
3
PR
8
PR
P1
2
6
3
3
3
4
2
4
2
5
1
5
1
6
4
4
6
4
7
7
7
7
8
8
8
PR
PR
PR
4
2
5
1
6
7
J2
J2
R2
100Ω
1/2 W
4
PR
8
PR
R1
100Ω
1/2 W
3
3
8
PR
P1
PR
1
2
5
PR
J1
P1
1
PR
7
1
8
2
1
3
2
PR
4
6
3
7
5
5
4
6
6
5
5
7
6
8
8
PR
Shield
PR
7
8
Part Number 0-0555672-1
Part Number 0-0555681-1
Part Number 0-0183723-1
Part Number 0-0183725-1
J1
J1
1
PR
3
J1
5
2
3
2
5
6
PR
1
PR
3
4
2
6
8
7
7
6
8
8
7
1
2
1
3
2
4
3
8
4
3
6
5
4
7
1
6
4
7
J2
1
8
2
PR
J2
PR
3
7
4
6
5
5
6
5
8
PR
7
6
8
7
8
PR
6
2
5
8
4
5
3
4
4
8
2
3
PR
3
7
1
5
PR
J2
1
4
6
PR
3
7
J2
5
2
2
5
P1
PR
1
3
4
6
J1
PR
PR
2
R2
100Ω
1/2 W
R1
100Ω
1/2 W
P1
PR
1
1
4
P1
1
P1
2
8
J3
7
1
8
2
Part Number 0-0183736-1
Part Number 0-0555648-1
Part Number 0-0555680-1
3
4
5
J1
R1
100Ω
1/2 W
P1
PR
5
1
2
6
PR
3
3
4
2
5
1
PR
6
4
7
7
8
8
1
J1
2
3
4
2
J1
J4
5
1
2
PR
4
2
3
3
7
7
3
2
4
8
8
4
1
5
6
PR
J2
6
4
5
6
3
4
P1
PR
1
1
5
2
3
7
6
PR
8
4
5
Part Number 0-1711001-X
5
6
6
7
7
8
8
Shield
Pin Out:
Shield
Part Number 0-0555622-1
P1
J1
1
Jack Side
Part Number 0-0555602-1
P1
J1
(N) 1
PR
Part Number 0-0555611-1
1
J1
(F) 1
2
2
2
3
2
3
2
3
3
4
1
4
4
5
4
5
5
6
6
PR
J2
1
7
3
6
4
5
5
8
3
3
4
4
5
6
PR
Part Number 0-0555614-1
P1: 21
J2: 45
P1: 43
1
J3: 45
P1: 65
2
J4: 45
P1: 87
P1
Part Number 0-1711000-X
Pin Out:
J2
1
(F)
2
2
Terminals 1&6 and 2&5 of
J1 and J2 are not shorted
when Connector is mated
Part Number 0-0557264-1
Cable Side
J1: 45
6
J2
(F) 1
PR
2
6
R4
100Ω
1/2 W
8
PR
6
PR
3
1
2
R3
100Ω
1/2 W
7
5
1
PR
J2
R1
100Ω
1/2 W
6
R2
100Ω
1/2 W
P1
PR
R2
100Ω
1/2 W
Shielded Twisted Pair Cabling
Wiremap
3
4
Jack Side
Cable Side
J1: 45,78
P1: 21
4
J2: 45,78
P1: 43
5
J3: 45,78
P1: 65
J4: 45,78
P1: 87
3
6
Terminals 1&6 and 2&5
of J1 and J2 are not shorted
when Connector is mated
Part Number 0-0183482-1
Part Number 0-1644016-X
http://www.ampnetconnect.com/EMEA
39
Connectivity
Shielded Twisted Pair Cabling
Balun Inserts
Description
Integration of applications using
50Ω, 75Ω, 93Ω or 150Ω can be done
quickly, easily and cost efficiently with
BALUN inserts.
The adaption to the required impedance
to the 100Ω cabling side can be done
by inserts listed here.
Connectors
Horizontal Cable
Patch Cord
Application
Part Number
1x BNC
100 Ω
93 Ω
IBM 3270
0-0555664-1
2x BNC
100 Ω
93 Ω
IBM 3270
0-0557245-1
1x BNC
100 Ω
50 Ω
10 Base-2
0-0555675-1
1x RJ-45
150 Ω
100 Ω
100 Base-TX
0-0558912-1
1x RJ-45
150 Ω
100 Ω
10 Base-T
0-0555694-1
1x RJ-45
150 Ω
150 Ω
Token Ring
0-0183733-1
2x BNC
150 Ω
93 Ω
IBM 3270
0-0555634-1
1x BNC
150 Ω
50 Ω
10 Base-2
0-1116746-1
Wiremap
IC 1
IC 1
93
Ohms
4
3
G
6
2
PR
G
2
1
3
93
Ohms
C1
.01 µF
500 V
S
6
3
G
8
105
Ohms
93
Ohms
G
2
4
1
3
50
Ohms
P1
2
P1
Signal Conditioning
Network
S
105
Ohms
4
P
BNC
Plug
105
Ohms
6
J1
RV 1
Surge
Suppressor
P1
2
93
Ohms
105
Ohms
2
4
S
1
105
Ohms
93
Ohms
PR
J2
P1
J1
S
110
Ohms
P
7
PR
IC 2
Part Number 0-0555664-1
Part Number 0-0557245-1
Part Number 0-0555675-1
IC 1
P1
J1
4
S
3
G
Part Number 0-0558912-1
6
8
1
C1
.01 µF
500 V
RV 1
Surge
Suppressor
Part Number 0-0555694-1
7
150
Ohms
93
Ohms
NC
1
NC
2
NC
5
NC
6
IC 1
J2
4
S
3
G
J1
S
Signal Conditioning
Network
50
Ohms
G
Part Number 0-0183733-1
40
http://www.ampnetconnect.com/EMEA
Part Number 0-1116746-1
6
1
P1
7
8
4
3
Green
Red
Orange
Black
150
Ohms
RV 2
Surge
Suppressor
3
105
Ohms
93
Ohms
C2
.01 µF
500 V
Part Number 0-0555634-1
4
Connectivity
Product Facts:
●
●
●
●
●
Cat. 6 Pyramid Tested (see p. 127)
Easiest installation with only 2 parts
Termination time less than 1 Minute (using Tyco’s patented AWC technique)
Patented shield clamp with integrated strain relief
Available with or without dust cover
Description
Part Number
Cat. 6 die-cast Jack with dust cover
0-1711160-1
Cat. 6 die-cast Jack without dust cover
0-1711342-1
For more
Information
see page 127
SL Series 110Connect Jacks
Product Facts:
●
●
●
Cat. 6 Pyramid Tested (see p. 127)
Universal wiring – T568 A or B wiring pattern
Available with 180° or 90° cable exit
Description
Part Number
Cat. 6 with straight cable exit (180°)
0-1375188-1
Cat. 6 with lateral cable exit (90°)
0-1479552-1
Cat. 5E with straight cable exit (180°)
0-1375189-1
Cat. 5E with lateral cable exit (90°)
0-1479717-1
For more
Information
see page 127
SL Series Toolless Jacks
Product Facts:
●
●
●
●
Cat. 5E
Terminated with common pliers, hinged stuffer cap simplifies assembly
Universal wiring – T568 A or B wiring pattern
For AWG 24 cables only
Description
Part Number
Cat. 5E
0-1339015-1
Standard 110Connect Jacks
Shielded Twisted Pair Cabling
AMP-TWIST-6S SL Jack
Product Facts:
●
●
Cat. 5E
Universal wiring – T568 A or B wiring pattern
Description
Part Number
Cat. 5E
0-1116515-1
EtherSeal Jack and Coupler Kits
Product Facts:
●
●
●
●
●
Category 6 or 5E and IP67 compliant, shielded
Front-loading into enclosures and outlets
Push-On and Twist-Off Mating Action, confirmed by tactile feedback
Blind mate with Polarized Keying
Optional Outlet Cap with tether available
Description
Part Number
Cat. 6 SL Series 110Connect Modular Jack Kit
0-1479566-2
Cat. 5E SL Series 110Connect Modular Jack Kit
0-1479564-2
Cat. 5E SL Series Toolless Modular Jack Kit
0-1479562-2
Cat. 5E SL Series In-Line Coupler Kit
0-1479600-2
Jack/Outlet Cap
0-1479591-2
http://www.ampnetconnect.com/EMEA
41
Outlets
Shielded Twisted Pair Cabling
AMP CO Plus Installation Kit 50 x 50 mm (Compatible with Frame Series)
Product Facts:
● Shielded installation kit flushmount
● DIN faceplate 50 x 50 mm
● Metal frame
● Compatible with standard and
designer frame series
●
●
●
●
●
Shielded edge connector Mark II
with PiMF management
Shielded housing with
360° cable clamp
Strain relief
Top, left or right cable entry
2,0 GHz performance
Color
Part Number
Almond (RAL 1013)
0-0336627-1
Pure white (RAL 9010)
2-0336627-1
Black (RAL 9005)
0-0336627-3
AMP CO Plus Installation Kit Flushmount
Product Facts:
● Shielded installation kit flushmount
● DIN faceplate 68 x 68 mm
with 6 x 32 label
● Metal frame
● Shielded edge connector Mark II
with PiMF management
●
●
●
●
Shielded housing with 360° cable
clamp
Strain relief
Top cable entry
2,0 GHz performance
Color
Part Number
Almond (RAL 1013)
0-1394581-1
Pure white (RAL 9010)
2-1394581-1
AMP CO Plus Installation Kit Angled
Product Facts:
● Shielded installation kit angled
● DIN faceplate 68 x 68 mm
with 6 x 32 label
● Metal frame
● Shielded edge connector Mark II
with PiMF management
●
●
●
●
Shielded housing with 360° cable
clamp
Strain relief
Rear cable entry
2,0 GHz performance
Color
Part Number
Almond (RAL 1013)
0-1394582-1
Pure white (RAL 9010)
2-1394582-1
For additional mounting adaptors like wallmount boxes, frames, mounting or underfloor frames see pages 94/95
42
http://www.ampnetconnect.com/EMEA
Outlets
Product Facts:
● Shielded installation kit
● Bottom cable exit
● For underfloor installation boxes
●
●
●
●
Shielded edge connector Mark II with
PiMF management
Shielded housing with 360° cable clamp
Strain relief
2,0 GHz performance
For Ackermann Boxes (60 mm mounting)
Color
Faceplate
Part Number
Almond (RAL 1013)
70 x 58 mm
0-1394763-1
For Elektraplan (KD E2, E4 and Q4)
Color
Faceplate
Part Number
Almond (RAL 1013)
50 x 50 mm
0-1394583-1
Ackermann is a Trademark
of Honeywell
AMP CO Plus Installation Kit 45 x 45 mm “Mosaic”
Product Facts:
● Shielded installation kit
flushmount
● Applicable to 45 x 45 mm
“Mosaic” systems
● Faceplate 45 x 45 mm
●
●
●
●
●
Shielded edge connector Mark II with
PiMF management
Shielded housing with 360° cable clamp
Strain relief
Left or right cable exit
2,0 GHz performance
45 x 45 mm Installations Kit
Color
Part Number
Almond (RAL 1013)
0-1379179-1
Pure white (RAL 9010)
0-1379179-2
Adapter Frame to 50 x 50 mm
Color
Part Number
Almond (RAL 1013)
0-1379156-1
AMP CO Plus Edge Connector for Upgrading AMP CO Classic Cablings
Product Facts:
●
●
●
●
●
Shielded Twisted Pair Cabling
AMP CO Plus Installation Kit Underfloor
Shielded edge connector Mark II for AWG 22–24 twisted pair cables
2,0 GHz performance
110C compatible IDC block
Universal color code
Fully shielded
Description
Part Number
Edge connector Mk II
0-0336455-X
-X
Quantity
-1
-2
-3
100 pieces
8 pieces
10 pieces
For more
Information
see page 127
AMP CO Classic Edge Connector for Type 1 (150 Ω) Cablings
Product Facts:
●
●
●
●
Unshielded edge connector Mark I for ICS Type 1 and Type 1A cabling
200 MHz performance
Insulation displacement barrel contacts
Universal color code + IBM Type 1 code
Description
Part Number
Edge connector Mk I
0-0556609-X
-X
Quantity
-1
-2
10 pieces
16 pieces
For additional mounting adaptors like underfloor frames see page 95
http://www.ampnetconnect.com/EMEA
43
Outlets
Shielded Twisted Pair Cabling
AMP CO Plus Installation Kit CH “EDIZIOdue”
Product Facts:
●
●
●
●
●
●
●
Description
Color
Part Number
AP: Surface mount, Gr. I, 50 mm
pure white
9-0101021-1
UP: Wall mount, Gr. I, 42 mm
pure white
0-1711187-1
UP: Wall mount, Gr. I, 42 mm
black
0-1711187-2
KNL: Tehalit trunk
pure white
9-0101021-3
KNL: Tehalit trunk
light grey
0-1644097-1
KNL: Tehalit trunk
dark grey
0-1644097-2
KNL: Tehalit trunk
black
0-1644097-3
●
Shielded installation kit
flushmount
Applicable to "EDIZIOdue"
systems
Left, right or top cable exit
Faceplate “EDIZIOdue”
Shielded edge connector Mark II
with PiMF management
Shielded housing with
360° cable clamp
Strain relief
2,0 GHz performance
AMP CO Plus Installations-Kit CH “Standard”
Product Facts:
●
●
●
●
●
●
●
Color
Part Number
Pure white
7-0101021-X
-X
Description
-0
-1
-3
UP: Wall mount, Gr. I, 42 mm
AP: Surface mount, Gr. I, 50 mm
KNL: Trunk, 60 mm
Shielded installation kit
flushmount
Left, right or top cable exit
Faceplate “Standard”
Shielded edge connector Mark II
with PiMF management
Shielded housing with 360° cable
clamp
Strain relief
2,0 GHz performance
AMP CO Plus Installations-Kit CH “FLF”
Product Facts:
●
●
●
●
●
●
44
Color
Part Number
Pure white
7-0101021-X
http://www.ampnetconnect.com/EMEA
-X
Description
-4
-5
-8
-9
FLF: Cable exit 90°
FLF-AP: Cable exit 90°
FLF: Cable exit 180°
FLF-AP: Cable exit 180°
●
●
Shielded installation kit
flushmount
Applicable to “FLF” systems
Left, right or top cable exit
Faceplate “FLF”
Shielded edge connector Mark II
with PiMF management
Shielded housing with 360° cable
clamp
Strain relief
2,0 GHz performance
Outlets
Product Facts:
●
●
●
●
●
●
●
●
●
Cat. 6 Pyramid Tested (see page 127)
Planar version: flush-mount outlet 100% compatible
with standard and designer frame series
Floor version: flat die-cast design for easy floor box mounting
50 x 50 mm faceplate universal fit
Cable entry angled to avoid bending
LSA+ compatible blocks
Universal label for TIA 568 A or TIA 568 B wiring
Protected PCB
For faceplate frame and back box see pages 94/95
For more
Information
see page 127
Description
Ports
Part Number
Planar outlet
2
Y-0336675-1
Planar outlet
1
Y-1711088-1
Planar outlet UP 0
2
5-0336675-1
Planar outlet UP 0
1
5-1711088-1
Floor outlet
2
Y-0336539-1
Spare faceplate for Planar Version
2
Y-1711161-1
Spare faceplate for Planar Version
1
Y-1711162-1
Spare faceplate for Floor Version
2
Y-1644070-1
Y-
Color
02-
almond (RAL 1013)
pure white (RAL 9010)
Cat. 5E Dual Outlet 45 x 45 mm “Mosaic”
Product Facts
●
●
●
●
●
●
Hard wired dual RJ-45 Outlet shielded
Cat. 5E
Compatible to “Mosaic”
With integrated shutters
Side cable exit
Individual ports are icon-able (see page 115)
Color: pure white (RAL 9010)
Description
Part Number
Cat. 5E Dual Outlet 45 x 45 mm “Mosaic”
0-0284265-1
http://www.ampnetconnect.com/EMEA
Shielded Twisted Pair Cabling
Cat. 6 DIN Dual Outlet AMP-TWIST-6S
45
Patch Cords
Shielded Twisted Pair Cabling
TERA™ Cat. 7 Patch Cord
Product Facts:
For more
Information
see page 127
●
●
Category 7 shielded
4 Pair stranded AWG 26/7
LSZH jacket
Color: white
Y- -X Length
Description
Part Number
TERA™ to TERA™
Y-1711177-X
TERA™ to RJ-45
Y-0336488-X
100001-
-1 0,5
-1 1,0
-2 2,0
-3 3,0
-5 5,0
-0 10,0
m
m
m
m
m
m
Other lengths
on request!
PiMF 600 Patch Cord
Product Facts:
● Manufactured with Category 7 cable
● 600 MHz S/FTP cable construction (Pairs in Metal Foil)
● 4 Pair stranded AWG 26/7
● LSZH jacket
● Color-matched snagless boots
● Universal wiring
For more
Information
see page 127
46
●
http://www.ampnetconnect.com/EMEA
Color
Part Number
Y- -X Length
white
Y-0959385-X
blue
Y-1711079-X
grey
Y-1711076-X
yellow
Y-1711078-X
100001-
red
Y-1711080-X
green
Y-1711077-X
-1 0,5
-1 1,0
-2 2,0
-3 3,0
-5 5,0
-0 10,0
m
m
m
m
m
m
Other lengths and
colors on request!
Patch Cords
Product Facts:
● F/UTP shield (foil) and SF/UTP shield (foil and braid) versions
● Category 5E according to ISO/IEC 11801 2nd Ed. and EN-50173-1
● 4 Pair stranded AWG 26/7
● LSZH jacket
● Color-matched snagless boots
● Universal wiring
Color
Part Number
F/UTP
Part Number
SF/UTP
white
Y-1644077-X
–
blue
Y-0959308-X
Y-0959239-X
grey
Y-0959305-X
Y-0959236-X
yellow
Y-0959307-X
Y-0959238-X
red
Y-0959309-X
Y-0959240-X
green
Y-0959306-X
Y-0959237-X
Y- -X Length
100001-
-1 0,5
-1 1,0
-2 2,0
-3 3,0
-5 5,0
-0 10,0
m
m
m
m
m
m
Other lengths and
colors on request!
Cat. 5E SF/UTP Patch Cord (white)
Product Facts:
● SF/UTP shield (foil and braid)
● Category 5E according to ISO/IEC 11801 2nd Ed. and EN-50173-1
● 4 Pair stranded AWG 26/7
● LSZH jacket
● Snagless boots
● Universal wiring
Shielded Twisted Pair Cabling
Cat. 5E F/UTP and SF/UTP Patch Cord
Y- -X Length
Color
Part Number
white
Y-0346925-X
000001-
-9 0,5
-5 1,0
-6 2,0
-7 3,0
-8 5,0
-1 10,0
m
m
m
m
m
m
Other lengths
on request!
http://www.ampnetconnect.com/EMEA
47
Patch Cords
Shielded Twisted Pair Cabling
Consolidation Point Transition Cable Assemblies
Product Facts:
●
●
●
●
●
●
For connections between work area outlet and consolidation point
Cat. 6 Shielded Twisted Pair Cable Assemblies
Performance according to ISO/IEC 11801 2nd Ed. and EN-50173-1
SL Series 110Connect Jack to modular plug
LSZH sheath
Universal wiring
Color: white
Y- -X Length
Description
Part Number
Category 6 transition cable
Y-1711029-X
01112-
-5
-4
-0
-5
-0
5,0
7,5
10,0
15,0
20,0
m
m
m
m
m
EtherSeal Cat. 5E SF/UTP Patch Cord
Product Facts:
●
●
●
●
●
●
●
●
Category 5E and IP67 compliant
SF/UTP shielded (foil and braid)
Utilizes EtherSeal, industrial grade Cat. 5E cable
Factory-terminated and tested for quality
Push-On and Twist Off Mating Action
Blind mate with Polarized Keying
Tactile feedback confirms full mating
Optional Plug Cap with available tether
Color: grey
48
http://www.ampnetconnect.com/EMEA
Description
Part Number
EtherSeal to EtherSeal
Y-1479603-X
EtherSeal to Standard RJ-45
Y-1479604-X
Plug Cap with Tether
0-1479592-2
Y- -X Length
00011-
-3
-5
-7
-0
-5
0,9
1,5
2,1
3,0
4,5
m
m
m
m
m
Fibre Optic Cable
3.
● Available in MM, SM and hybrid
● LSZH sheath
● Available in different fibre categories
Patch Panels
● 1 U standard versions
● Modular versions for Snap-In connector modules
● 4 U fibre distribution unit
Fibre Optic (FO)
Cabling Systems
Wallmount Enclosures
● Available for connector modules
● Available for splicing technologies
● Unpopulated or preloaded
Connectors
●
●
●
●
Epoxy connectors
Quick termination connectors
Adapters
Available in MM and SM
Outlets
System Cables
50
● Available for floorboxes and cable ducts
● Optional cable management
Patch Panels
57
Wall Mount Enclosures
64
Connectivity
68
Outlets
78
Cable Assemblies
79
Cable Assemblies
● Pigtails and Patchcords
● LSZH sheath
● Available in MM and SM
System Cable
Fibre Optic Cabling
Technical Data
Fire performance
Aspect
Norm
Sheathing materials for internal cables
comply fully with the following standards:
Flammability
Smoke Emission
Acid Gas Emission
Toxicity
IEC 60332 Parts 1 and 3c
IEC 61034 Parts 1 and 2
IEC 6075 Parts 1 and 2
NES 713
For all
OM3 XG
system
cables
For more
Information
see page 127
Multimode Fibres
Multimode
Fibres
Overfill Bandwidth
(MHz x km)
Max. Link Length for 1 GBit/s
(m)
EN 50173/ISO 11801
850 nm
1300 nm
OM1
62.5 µm
≥ 200
≥ 600
OM1 Plus
62.5 µm
≥ 250
OM2
50 µm
≥ 500
OM2 Plus
50 µm
OM3 (XG)
50 µm
OM3 Plus
50 µm
Max. Link Length for 10 GBit/s
(m)
850 nm
(10GBase-SR)
(10GBase-SW)
1300 nm
(10GBase-LX4)
Fibre Attenuation
(dB/km)
850 nm
(1000Base-SX)
1300 nm
(1000Base-LX)
850 nm
1300 nm
300
550
26*
300*
≤ 2.9
≤ 0.7
≥ 800
400
1000
26*
300*
≤ 2.9
≤ 0.7
≥ 500
550
550
82*
300*
≤ 2.4
≤ 0.6
≥ 600
≥ 1200
750
2000
82*
300*
≤ 2.4
≤ 0.6
≥ 1500
≥ 500
970
600
330
300
≤ 2.7
≤ 0.7
≥ 3500
≥ 500
1050
600
550
300
≤ 2.7
≤ 0.7
* Mode Conditioning Patchcords required
Singlemode Fibres
Singlemode
Fibres
EN 50173/ISO 11801
Chromatic Dispersion
(ps/nm x km)
Cut-off Wavelength, cabled
(nm)
Point Discontinuity
(dB)
1310 nm
1550 nm
OS1 (ITU-T G.652b) 9 µm
≤ 3.5
≤ 18.0
≤ 1260
≤ 0.1
LWP (ITU-T G.652d) 9 µm
≤ 3.5
≤ 18.0
≤ 1260
≤ 0.1
Fibre Attenuation
(dB/km)
1310 nm
1380–1386 nm
1550 nm
≤ 0.33
–
≤ 0.21
≤ 0.34
≤ 0.31
≤ 0.22
Geometrical Fibre Properties
Fibre Type
Core/Mode-field (µm)
OM1, OM1 Plus
OM2, OM2 Plus, OM3 (XG), OM3 Plus
OS1, LWP
Cladding (µm)
Coating (µm)
62.5 ± 3
125 ± 2
245 ± 10
50 ± 3
125 ± 2
245 ± 10
9.2 ± 0.4
125 ± 1
245 ± 5
Optical Cable Specifications
Maximum Attenuation (db/km)
Loose Tube
50
Tight Buffered
Multimode
850 nm
1300 nm
850 nm
1300 nm
50/125
3.5
1.5
3.5
1.5
62,5/125
3.5
1.5
3.5
1.5
Singlemode
1310 nm
1550 nm
1310 nm
1550 nm
9/125
0.45
0.4
0.5
0.45
http://www.ampnetconnect.com/EMEA
System Cable
AMP NETCONNECT Zip Twin system cable
●
Low Smoke Zero Halogen (LSZH)
●
Available buffer designs: Tight-Buffer or Easistrip
●
Fibre categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM3 Plus, OS1
●
Tight buffer versions suitable for AMP NETCONNECT Quick Termination Products
●
Easistrip suitable for fusion splice and epoxy techniques
LSZH sheath
Aramid strength
members
0,9 mm buffered
optical fibre
Fibre count
Cable type
Part Number
-X
Fibre category
2
Zip Twin TB
Y-0599142-X
2
Zip Twin ES
Y-0599192-X
-2
-3
-4
-5
-6
-7
-9
OM3
OM3
OS1
OM1
OM2
OM2
OM1
Y-
Reel size
12-
1 Kilometer
2 Kilometer
TB = Tight Buffered Construction
ES = Easistrip (providing 30 cm stripping)
Fibre Optic Cabling
Zip Twin Cable
Plus
(XG)
Plus
Plus
Mechanical Performance
Fibre count
Overall-Ø
(mm)
Weight
(kg/km)
Installation tension max.
during installation (N)
Crush resistance
(N)
Minimum bend radius
during installation (mm)
ZipTwin
2,5 x 5,0
14
300
1000
40
Temperature Range
Cable type
Transport/Storage
Installation
Operation
ZipTwin
– 10 to + 70 °C
– 5 to + 70 °C
– 10 to + 70 °C
Packaging
Fibre count
ZipTwin
Reel type
P6
Reel Dimensions
Flange (mm)
Traverse (mm)
600
400
http://www.ampnetconnect.com/EMEA
51
System Cable
Fibre Optic Cabling
Internal/External Office Distribution Cable
AMP NETCONNECT office distribution system cable
●
Universal Low Smoke Zero Halogen (ULSZH)
●
For indoor and outdoor applications
●
Suitable for backbone and Fibre-to-the-Desk
●
Increased strength and durability
●
Tight-Buffer construction
●
Suitable for all termination techniques
●
Fibre categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM3 Plus, OS1
●
Available fibre count: 4–48
●
Option: water swelling E-glass yarns providing rodent resistance and moisture protection
Fibre count
ULSZH sheath
Aramid strength
members
0,9 mm buffered
optical fibre
Part Number
-X
Fibre category
4
Y-0599144-X
6
Y-0599145-X
8
Y-0599146-X
12
Y-0599148-X
16
Y-0599149-X
-2
-3
-4
-5
-6
-7
-9
OM3
OM3
OS1
OM1
OM2
OM2
OM1
24
Y-0599151-X
Y-
Reel size
36
Y-0599602-X
48
Y-0599603-X
12-
1 Kilometer
2 Kilometer
Plus
(XG)
Plus
Plus
Mechanical Performance
Fibre count
Overall-Ø
(mm)
Weight
(kg/km)
Installation tension max.
during installation (N)
Crush resistance
(N)
Minimum bend radius
during installation (mm)
4
5
27
650
2000
75
6
6
33
1000
2000
90
8
6
35
1000
2000
90
12
7,5
56
1000
2000
115
16
8
61
1000
2000
110
24
14,6
206
1500
2000
280
36
17
280
2000
2000
430
48
17
240
2000
2000
430
Temperature Range
Cable type
Transport/Storage
Installation
Operation
Office Distribution Cable
– 20 to + 70 °C
– 5 to + 50 °C
– 10 to + 70 °C
Packaging
Fibre count
Reel type
Reel Dimensions
Flange (mm)
52
Traverse (mm)
4
P6
600
400
6, 8, 12
P8
860
400
16
P10
1000
500
24
P12
1200
500
36, 48
P14
1400
700
http://www.ampnetconnect.com/EMEA
System Cable
AMP NETCONNECT loose tube system cable
●
Universal Low Smoke Zero Halogen (ULSZH)
●
For indoor and outdoor applications
●
Available with dry or gel filled tube
●
Loose tube construction
●
Suitable for all termination techniques
●
Fibre categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM3 Plus, OS1
●
Available fibre count: 4–96 (higher fibre count upon request)
●
Aramid yarns
Dry tube version
Gel filled tube version
Fibre count
Part Number
Fibre count
Part Number
-X
Fibre category
4
Y-0599152-X
4
Y-0599160-X
6
Y-0599153-X
6
Y-0599161-X
8
Y-0599154-X
8
Y-0599162-X
12
Y-0599156-X
12
Y-0599164-X
-2
-3
-4
-5
-6
-7
-9
OM3
OM3
OS1
OM1
OM2
OM2
OM1
16
Y-0599157-X
16
Y-0599165-X
24
Y-0599159-X
24
Y-0599167-X
Y-
Reel size
48
Y-0599605-X
48
Y-0599609-X
72
Y-0599606-X
72
Y-0599610-X
12-
1 Kilometer
2 Kilometer
96
Y-0599607-X
96
Y-0599611-X
ULSZH sheath
Plus
(XG)
Aramid strength
members
Loose tube
Plus
Fibre Optic Cabling
Internal/External Distribution Cable (Loose Tube)
Plus
Fibres
Mechanical Performance
Fibre count
No of
tubes/fillers
Overall-Ø
(mm)
Weight
(kg/km)
Installation tension max.
during installation (N)
Crush resistance
(N)
Minimum bend radius
during installation (mm)
4, 6, 8, 12
1
6,4
33
500
2000
140
16
1
7,5
44
500
2000
150
24, 48
4
11,5
125
1000
2000
170
72
6
12,7
155
2700
2000
250
96
8
15
210
2700
2000
300
Temperature Range
Cable type
Transport/Storage
Installation
Operation
Dry, loose tube
– 10 to + 60 °C
– 5 to + 50 °C
– 10 to + 60 °C
Gel filled, loose tube
– 20 to + 60 °C
– 5 to + 50 °C
– 20 to + 60 °C
Packaging
Fibre count
Reel type
Reel Dimensions
Flange (mm)
Traverse (mm)
4, 6, 8, 12, 16
P10
1000
500
24
P12
1200
500
36
P12
1200
500
48, 72
P12
1200
500
96
P14
1400
700
http://www.ampnetconnect.com/EMEA
53
System Cable
Fibre Optic Cabling
Internal/External Rodent Resistant Non-Metallic Cables
AMP NETCONNECT system cable with non-metallic rodent resistance
●
Universal Low Smoke Zero Halogen (ULSZH)
●
LDPE sheath upon request
●
For indoor and outdoor applications
●
For use in ducts and in direct burial applications
●
Non-metallic rodent resistant with peripheral strength members
●
Water swelling E-glass yarn (moisture protection)
●
Available with gel filled or dry tubes
●
Loose tube construction
●
Suitable for all termination techniques
●
Fibre categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM3 Plus, OS1
●
Available fibre count: 4–48 (higher fibre count upon request)
Dry tube version
Gel filled tube version
Fibre count
Fibre count
ULSZH sheath
Water blocking E-glass
strength members
Part Number
Part Number
-X
Fibre category
-2
-3
-4
-5
-6
-7
-9
OM3
OM3
OS1
OM1
OM2
OM2
OM1
Optical fibre
Plus
(XG)
4
Y-0599614-X
4
Y-0599622-X
6
Y-0599615-X
6
Y-0599623-X
8
Y-0599616-X
8
Y-0599624-X
12
Y-0599617-X
12
Y-0599625-X
16
Y-0599618-X
16
Y-0599626-X
24
Y-0599619-X
24
Y-0599627-X
Y-
Reel size
36
Y-0599620-X
36
Y-0599628-X
48
Y-0599621-X
48
Y-0599629-X
12-
1 Kilometer
2 Kilometer
Loose tube
Ripcord
Plus
Plus
Mechanical Performance
Fibre count
No of
tubes/fillers
Overall-Ø
(mm)
Weight
(kg/km)
Installation tension max.
during installation (N)
Crush resistance
(N)
Minimum bend radius
during installation (mm)
4, 6, 8, 12
1
6,4
48
1250
1000
140
16
1
8
74
1250
1000
160
24, 36, 48
4
11,5
105
2000
2000
230
Temperature Range
Cable type
Transport/Storage
Installation
Operation
Dry, loose tube
– 10 to + 70 °C
– 5 to + 50 °C
– 10 to + 70 °C
Gel filled, loose tube
– 20 to + 70 °C
– 5 to + 50 °C
– 20 to + 70 °C
Packaging
Fibre count
54
Reel type
Reel Dimensions
Flange (mm)
Traverse (mm)
500
4, 6, 8, 12, 16
P10
1000
24
P12
1200
500
36, 48
P12
1200
500
http://www.ampnetconnect.com/EMEA
System Cable
AMP NETCONNECT loose tube system cable with GRP armouring
●
Universal Low Smoke Zero Halogen (ULSZH)
●
LDPE sheath upon request
●
For external applications where increased resistance to rodent attack is required
●
For use in ducts and in direct burial applications
●
Non-metallic rodent resistant Glass Reinforced Plastic armouring
●
Longitudinal and lateral water resistance
●
High crush resistance and high tensile strength
●
Gel filled loose tube construction
●
Suitable for all termination techniques
●
Fibre categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM3 Plus, OS1
●
Available fibre count: 4–48 (higher fibre count upon request)
ULSZH sheath
Fibre count
Part Number
-X
Fibre category
4
Y-0599168-X
6
Y-0599169-X
8
Y-0599170-X
12
Y-0599172-X
16
Y-0599173-X
-2
-3
-4
-5
-6
-7
-9
OM3
OM3
OS1
OM1
OM2
OM2
OM1
24
Y-0599175-X
Y-
Reel size
36
Y-0599612-X
48
Y-0599613-X
12-
1 Kilometer
2 Kilometer
Non-metallic
armouring
Water blocking Gel
Plus
(XG)
Central strength
member
Wrapping tape
Loose tube
Plus
Plus
Fibre Optic Cabling
External Rodent Resistant Non-Metallic Armoured Cables
Optical fibres
Mechanical Performance
Fibre count
No of
tubes/fillers
Overall-Ø
(mm)
Weight
(kg/km)
Installation tension max.
during installation (N)
Crush resistance
(N)
4, 6, 8, 12
1
9
16
1
11
24, 36, 48
4
15
236
Minimum bend radius
during installation (mm)
94
2000
3000
230
143
3000
3000
280
6000
4000
465
Temperature Range
Cable type
Transport/Storage
Installation
Single tube
– 20 to + 70 °C
– 5 to + 50 °C
Operation
– 20 to + 70 °C
Multi tube
– 30 to + 70 °C
– 5 to + 50 °C
– 30 to + 70 °C
Packaging
Fibre count
Reel type
Reel Dimensions
Flange (mm)
Traverse (mm)
500
4, 6, 8, 12, 16
P10
1000
24
P14
1400
700
36, 48
P14
1400
700
http://www.ampnetconnect.com/EMEA
55
System Cable
Fibre Optic Cabling
External Rodent Resistant Cable with Corrugated Steel Armour
AMP NETCONNECT loose tube system cable with metal armour for external applications
●
HDPE (High Density Polyethylene)
●
Metallic rodent resistance (corrugated steel)
●
For use in ducts and in direct burial applications
●
Longitudinal and lateral water resistance
●
Central gel-filled loose tube construction
●
Excellent crush and impact resistance
●
Suitable for all termination techniques
●
Fibre categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM3 Plus, OS1
●
Available fibre count: 4–24 (higher fibre count upon request)
●
Option: ULSZH sheath for internal and external applications
High Density Polyethylen
(HDPE) Sheath
Part Number
-X
Fibre category
4
Y-0599681-X
6
Y-0599682-X
-2
-3
-4
-5
-6
-7
-9
OM3
OM3
OS1
OM1
OM2
OM2
OM1
Y-
Reel size
12-
1 Kilometer
2 Kilometer
Fibre count
Corrugated steel tape
armouring
Loose tube
Water blocking gel
Optical fibres
Water blocking E-glass
8
Y-0599692-X
12
Y-0599683-X
24
Y-0599690-X
Plus
(XG)
Plus
Plus
Mechanical Performance
Fibre count
No of
tubes/fillers
Overall-Ø
(mm)
Weight
(kg/km)
Installation tension max.
during installation (N)
Crush resistance
(N)
Minimum bend radius
during installation (mm)
4, 6, 8, 12
1
10
102
1200
3000
200
24
4
10,5
111
1200
3000
210
Temperature Range
Cable type
Transport/Storage
Installation
Operation
Single tube
– 20 to + 70 °C
– 5 to + 50 °C
– 20 to + 70 °C
Multi tube
– 30 to + 70 °C
– 5 to + 50 °C
– 30 to + 70 °C
Packaging
Fibre count
4, 6, 8, 12, 24
56
Reel type
P12
http://www.ampnetconnect.com/EMEA
Reel Dimensions
Flange (mm)
Traverse (mm)
1200
600
Patch Panels
Product Facts:
●
●
●
●
●
●
MT-RJ panel, 1 U, 19,
Holds up to 24 MT-RJ Jacks (see page 68/69)
or up to 24 MT-RJ Pigtails (see page 80)
Drawer style, slide and tilt
Accessories for splicing see page 63
Incl. management rings
Splice tray not included
Color: black
Description
Style
MT-RJ quick termination
MT-RJ Fusion splice technology Part Number
Workstation Jack**
Panel Jack
Splicing possible
With 6 cable entries, incl. 2 metric glands
universal
no
yes
yes
0-1206704-4
With open backside
universal
no
yes
no
0-1536663-2
With open backside
Switzerland
no
yes
no
3-0101023-1
With 24 shutters
universal
yes
yes*
yes*
0-1671003-4
* use of workstation SL-housing necessary (see page 68)
** Kit including MT-RJ Jack, SL-Housing and strain relief (see page 68)
1 U ST-Style, SC or LC-Style Patch Panel, International Version
Fibre Optic Cabling
1 U MT-RJ Patch Panel, International Version
Product Facts:
●
●
●
●
●
●
●
Drawer style, 1 U, 19
Preinstalled dust covers on unpopulated ports
Incl. management rings and metric glands
Available in 300 mm and 220 mm depth
Available in ST-Style, SC and LC-Style
Supplied without splicing tray
Accessories for splicing on page 63
Color: black
Description
300 mm deep
220 mm deep
Unpopulated
0-1206114-8
0-1206480-8
With 12 adapters
2-1206114-4
2-1206480-4
With 24 adapters
4-1206114-4
4-1206480-4
Unpopulated
0-1206138-8
0-1206505-8
With 6 adapters
2-1206138-4
2-1206505-4
With 12 adapters
4-1206138-4
4-1206505-4
Unpopulated
0-1206138-8
0-1206505-8
With 6 adapters
2-1348960-4
2-1671017-4
With 12 adapters
4-1348960-4
4-1671017-4
Unpopulated
0-1206343-4
–
With 24 Multimode adapters
4-1206343-4
–
With 24 Singlemode adapters
4-1671002-4
–
Unpopulated
0-1671000-8
–
With 12 adapters
2-1671000-8
–
With 24 adapters
4-1671000-8
–
Unpopulated
0-1671000-8
–
With 12 adapters
2-1671000-4
–
With 24 adapters
4-1671000-4
–
24 x ST-Style, Multimode
12 x SC Duplex, Multimode
12 x SC Duplex, Singlemode
24 x SC Duplex, Multimode and Singlemode
24 x LC Duplex, Multimode
24 x LC Duplex, Singlemode
http://www.ampnetconnect.com/EMEA
57
Patch Panels
Fibre Optic Cabling
1 U ST-Style, SC or LC-Style Patch Panel for German Spoken Countries
Product Facts:
●
●
●
●
●
●
●
●
●
●
●
1 U, 19, metal
Pre-installed adapters
Pre-installed dustcovers on unpopulated ports
Alignment sleeve material: Multimode = Metal
Singlemode = Ceramic
2 rear cable entries
Incl. 1 blindcover and 1 metric pre-installed cable entry plate
(german version)
8 adhesive cable grommets (swiss version)
Populated drawerstyle versions comes with splice tray(s) (swiss version)
Populated fix style versions comes with cable management rings
Supplied without splicing trays
Accessories for splicing see page 63
Color: light grey
Description
German style
Swiss style
Fix style
without Pigtails
Drawer style
without Pigtails
Drawer style
without Pigtails
Drawer style
with 50/125 µm Pigtails
Drawer style
with 62,5/125 µm Pigtails
Unpopulated
0-0969614-1
0-0969993-1
0-0101023-0
–
–
With 12 adapters
1-0969616-1
0-0969628-1
0-0101023-1
0-0101023-3
0-0101023-5
With 24 adapters
1-0969618-1
0-0969630-1
0-0101023-2
0-0101023-4
0-0101023-6
Unpopulated
0-0969615-1
0-0969994-1
–
–
–
With 6 adapters
1-0969617-2
0-0969629-2
–
–
–
With 12 adapters
1-0969619-2
0-0969631-2
–
–
–
Unpopulated
0-0969615-1
0-0969994-1
–
–
–
With 6 adapters
0-1418730-1
0-1418732-1
–
–
–
With 12 adapters
0-1418731-1
0-1418733-1
–
–
–
Unpopulated
0-0969615-1
0-0969994-1
1-0101023-0
–
–
With 6 adapters
1-0969617-1
0-0969629-1
1-0101023-1
1-0101023-3
1-0101023-5
With 12 adapters
1-0969619-1
0-0969631-1
1-0101023-2
1-0101023-4
1-0101023-6
Unpopulated
0-1418720-1
0-1418723-1
–
–
–
With 12 adapters
0-1418721-1
0-1418724-1
–
–
–
With 24 adapters
0-1418722-1
0-1418725-1
–
–
–
Unpopulated
0-1418720-1
0-1418723-1
–
–
–
With 12 adapters
0-1418726-1
0-1418728-1
–
–
–
With 24 adapters
0-1418727-1
0-1418729-1
–
–
–
0-1418734-1
0-1418735-1
–
–
–
24 x ST-Style, Multimode
12 x ST-Style Duplex/SC Duplex, Multimode
12 x SC Duplex/SC Duplex, Singlemode
12 x SC Duplex/SC Duplex, Multimode
24 x LC Duplex/LC Duplex, Multimode
24 x LC Duplex/LC Duplex, Singlemode
24 x SC Duplex/SC Duplex
Unpopulated
58
http://www.ampnetconnect.com/EMEA
Patch Panels
Fibre Optic Cabling
1 U Patch Panel, empty, for 3 Snap-In-Modules
Product Facts:
●
●
●
●
●
1 U, 19, metal
Drawer style
Accommodates up to 3 Snap-In-Modules (see page 61/62)
Incl. cable management and metric glands
Quick release front panel
Color: black
Description
Height
Part Number
Panel for Snap-in-Modules
1U
0-1348876-4
Panel for 3 Snap-in-Modules
1U
0-1671082-8
Description
Fibre Density
Duplex Port Density
ST-Style Snap-In-Module, 6 fibres
18
9
ST-Style Snap-In-Module, 12 fibres
36
18
SC Snap-In-Module, 6 fibres
18
9
SC Snap-In-Module, 12 fibres
36
18
MT-RJ Snap-In-Module, 12 fibres
36
18
LC Snap-In-Module, 12 fibres
36
18
SC to MPO Cassette, 12 fibres
36
18
MT-RJ to MPO Cassette, 24 fibres
72
36
LC to MPO Cassette, 12 fibres
36
18
2 U Patch Panel, empty, for 4 Snap-In-Modules
Product Facts:
●
●
●
●
●
●
●
●
2 U, 19, metal
Accommodates 4 Snap-In-Modules (see page 61/62)
Removable back cover for easy installation
Cable strain relief brackets in back
Front and rear cable management rings
Edge guard on front cable entries
Fits standard 19 and 23 racks
Shown loaded with 6-fibre duplex SC adapter plates (not included)
Color: black
Description
Panel for Snap-In-Modules
Description
Height
Part Number
2U
0-0559542-2
Fibre Density
Duplex Port Density
ST-Style Snap-In-Module, 6 fibres
24
12
ST-Style Snap-In-Module, 12 fibres
48
24
SC Snap-In-Module, 6 fibres
24
12
SC Snap-In-Module, 12 fibres
48
24
MT-RJ Snap-In-Module, 12 fibres
48
24
LC Snap-In-Module, 12 fibres
48
24
SC to MPO Cassette, 12 fibres
48
24
MT-RJ to MPO Cassette, 24 fibres
96
48
LC to MPO Cassette, 12 fibres
48
24
http://www.ampnetconnect.com/EMEA
59
Patch Panels
Fibre Optic Cabling
MPO to MT-RJ Snap-In-Cassettes
Product Facts:
●
●
●
●
●
●
For more
Information
see page 127
Simple and flexible premises fibre cabling
Pre-terminated cassettes with 2 MPO trunk connections
(2 x 12 fibres) at rear
MPO trunk cables see page 84
12 x MT-RJ at the frontside
Easy installation, moves, adds and changes
Fits in all AMP NETCONNECT patch panels for Snap-In-Modules
Fibre type
Fiber
count
Part Number
Pairs flipped
Pairs straight
24
0-1391920-1
0-1391926-1
50 µm, Multimode
24
0-1391922-1
0-1391928-1
50 µm, OM3, 10 GBit XG, Multimode
24
0-1391931-1
1-1391931-1
9 µm, Singlemode
24
0-1391924-1
0-1391930-1
62,5 µm, Multimode
MPO to SC Snap-In-Cassettes
Product Facts:
●
●
●
●
●
●
For more
Information
see page 127
Simple and flexible premises fibre cabling
Pre-terminated cassettes with 1 MPO trunk connection
(1 x 12 fibres) at rear
MPO trunk cables see page 84
6 x SC Duplex at the frontside
Easy installation, moves, adds and changes
Fits in all AMP NETCONNECT patch panels for Snap-In-Modules
Fibre type
Fiber
count
Part Number
Pairs flipped
Pairs straight
12
0-1391932-1
0-1391938-1
50 µm, Multimode
12
0-1391934-1
0-1391940-1
50 µm, OM3, 10 GBit XG, Multimode
12
1-1695133-1
0-1695133-1
9 µm, Singlemode
12
0-1391936-1
0-1391942-1
62,5 µm, Multimode
MPO to LC Snap-In-Cassettes
Product Facts:
●
●
●
●
●
●
For more
Information
see page 127
Simple and flexible premises fibre cabling
Pre-terminated cassettes with either 1 or 2 MPO trunk connections
(1 x 12 or 2 x 12 fibres) at rear
MPO trunk cables see page 84
Either 6 x LC Duplex or 12 x LC Duplex at the frontside
Easy installation, moves, adds and changes
Fits in all AMP NETCONNECT patch panels for Snap-In-Modules
Fibre type
http://www.ampnetconnect.com/EMEA
Part Number
Pairs flipped
Pairs straight
12
0-1391914-6
0-1391914-5
50 µm, Multimode
12
0-1391914-4
0-1391914-3
50 µm, OM3, 10 GBit XG, Multimode
12
0-1391914-8
0-1391914-7
9 µm, Singlemode
12
0-1391914-2
0-1391914-1
62,5 µm, Multimode
24
0-1695355-6
0-1695355-5
50 µm, Multimode
24
0-1695355-4
0-1695355-3
50 µm, OM3, 10 GBit XG, Multimode
24
0-1695355-8
0-1695355-7
9 µm, Singlemode
24
0-1695355-2
0-1695355-1
62,5 µm, Multimode
60
Fiber
count
Patch Panels
Product Facts:
●
Holds up to six MT-RJ Jacks (see page 69) or MT-RJ Jack pigtails
(see page 80)
●
Fits in AMP NETCONNECT patch panels for Snap-In-Modules
●
Individual ports icon-able (see page 115)
Description
Part Number
Snap-In-Module for 6 MT-RJ Jacks or Jack Pigtails
0-1278328-3
ST-Style Snap-In-Modules
Product Facts:
●
Fits in all AMP NETCONNECT
patch panels for Snap-In-Modules
Description
Packaging
Part Number
ST-Style, 6 fibres (Multimode)
1
0-0559557-1
ST-Style, 6 fibres (Multimode)
100
0-0559515-1
ST-Style, 6 fibres (Singlemode)
1
0-0559515-2
ST-Style, 12 fibres (Multimode)
1
0-1278567-1
ST-Style, 12 fibres (Singlemode)
1
0-1278567-2
Fibre Optic Cabling
MT-RJ Snap-In-Modules
12 fibres
6 fibres
SC Snap-In-Modules
Product Facts:
●
Fits in all AMP NETCONNECT
patch panels for Snap-In-Modules
Description
-X
Fibre type
-1
-2
Multimode
Singlemode
Packaging
Part Number
Duplex SC, 6 fibres
1
0-0559558-X
Duplex SC, 6 fibres
100
0-0559516-X
Duplex SC, 12 fibres
1
0-0559596-X
12 fibres
6 fibres
http://www.ampnetconnect.com/EMEA
61
Patch Panels
Fibre Optic Cabling
SC to ST-Style Snap-In-Modules
Product Facts:
●
Fits in all AMP NETCONNECT
patch panels for Snap-In-Modules
12 fibres
Description
Packaging
Part Number
Duplex SC to ST-Style, 6 fibres (Multimode)
1
0-0559601-1
Duplex SC to ST-Style, 6 fibres (Multimode)
100
0-0559601-2
Duplex SC to ST-Style, 12 fibres (Multimode)
1
0-1278368-1
Packaging
Part Number
LC Duplex, 12 fibres (Multimode)
1
0-1374463-2
LC Duplex, 12 fibres (Singlemode)
1
0-1374463-1
Packaging
Part Number
Blank modules
1
0-0559523-1
Blank modules
100
0-0559575-1
6 fibres
LC Snap-In-Modules
Product Facts:
●
Fits in all AMP NETCONNECT
patch panels for Snap-In-Modules
Multimode
Description
Singlemode
Snap-In Blank Modules
Description
Accessories for Patch Panels
Description
Packaging
45° cable entry plate for metric glands (german style panels only)
0-1418770-1
PG 11 Gland (3,5–8 mm)
50
0-1206144-1
PG 16 Gland (9–14 mm)
50
0-1206145-1
M 20
50
0-1671054-1
M 25
50
0-1671054-2
Cable management ring kit (2 rings)
1
0-1206146-1
Dust cover for ST-Style Cut-Out
1
0-0969986-1
Dust cover for SC Simplex Cut-Out
1
0-1418800-1
Dust cover for SC Duplex Cut-Out
10
0-0969987-1
1
9-0101013-0
Grommets for buffer storage
62
http://www.ampnetconnect.com/EMEA
Part Number
1
SMOUV splice protector (62 mm)
100
657054-000
ANT splice protector
150
182398-000
Patch Panels
Fibre Optic Cabling
4 U Modular Fibre Distribution Unit
Product Facts:
●
●
●
●
4 U, 19, metal, black
Accepts up to 12 fibre modules (see below)
Integrated drawer for overlength storage
Optional: front cable management rings
Description
Part Number
Modular fibre distribution unit
0-0336707-1
Cable management rings
0-0336709-1
Fibre Modules
Product Facts:
●
●
●
●
Available with the following connector types: ST-Style, SC, MT-RJ, LC, MU
Can accomodate the below splice trays (splice trays not included)
Offers fibre, buffer and loose tube management
For quick termination techniques and fusion splicing (splice tray needed)
Fibre modules
Part Number
6 x MT-RJ for MT-RJ Workstation Jacks and
SL Housings, unpopulated
0-0336720-1
6 x SC Duplex, Multimode
0-0336711-4
6 x SC Duplex, Singlemode
0-0336711-6
6 x SC Duplex Cutout, unpopulated
0-0336711-1
6 x ST-Style Duplex, Multimode
0-0336711-3
6 x ST-Style Duplex, Singlemode
0-0336711-2
6 x ST-Style/SC Duplex, Multimode
0-0336711-5
6 x ST-Style/SC Duplex, Singlemode
0-0336711-7
12 x SC Simplex Cutout, unpopulated
0-0336714-1
12 x MT-RJ adapter
0-0336714-2
12 x SC Simplex, Singlemode
0-0336714-5
12 x SC Simplex, Singlemode APC
0-0336714-7
6 x LC Duplex, unpopulated (SC-Simplex Cutout)
0-1671044-1
6 x LC Duplex, Singlemode
0-1671044-2
6 x LC Duplex, Multimode
0-1671044-3
blank
0-0336721-1
Splice Trays
Product Facts:
●
●
Delivered with cover
Splice protectors not included (see page 62)
Universal Splice Tray FOSC-500 AA*
Description
Part Number
For 24 SMOUV (62 mm) splice protectors
E96145-000
For 24 ANT splice protectors
D81297-000
* fits in: – all 1 U patch panel, international style
– modular fibre distribution unit
– MT-RJ Panels (Part Numbers 0-1206704-4 and 0-1671003-4)
http://www.ampnetconnect.com/EMEA
63
Wall Mount Enclosures
Fibre Optic Cabling
Wall Mount Enclosure for 2 Modules, Unloaded, No Side Door
Product Facts:
●
●
●
●
●
●
●
●
Accepts 2 Snap-In-Modules (see page 61/62)
Optional lock available
Optional grommets available
Reversible cable strain relief bracket
Internal cable management rings and securing devices
Loop storage for distribution cables
Recessed, easy-to-use door latches
Dimensions (for exact dimensions consult customer drawing):
8 (20 cm) H x 4 (10 cm) D x 8 (20 cm) W
Description
Part Number
Wall mount enclosure, unloaded
0-1278323-2
Grommets
0-0559496-2
Description
Fibre Density
Duplex Port Density
ST-Style Snap-In-Module, 6 fibres
12
6
ST-Style Snap-In-Module, 12 fibres
24
12
SC Snap-In-Module, 6 fibres
12
6
SC Snap-In-Module, 12 fibres
24
12
MT-RJ Snap-In-Module, 12 fibres
24
12
LC Snap-In-Module, 12 fibres
24
12
Wall Mount Enclosure for 2 Modules, Unloaded, With Side Door
Product Facts:
●
●
●
●
●
●
●
●
●
Accepts 2 Snap-In-Modules (see page 61/62)
Optional lock available
Optional grommets available
Designed for intrabuilding or campus backbone applications
Reversible cable strain relief bracket
Internal cable management rings and securing devices
Loop storage for distribution cables
Recessed, easy-to-use door latches
Dimensions (for exact dimensions consult customer drawing):
8 (20 cm) H x 4 (10 cm) D x 15 (38 cm) W
Description
Part Number
Wall mount enclosure, unloaded
0-0559560-2
Grommets
0-0559496-2
Lock
0-0559501-2
Description
64
http://www.ampnetconnect.com/EMEA
Fibre Density
Duplex Port Density
ST-Style Snap-In-Module, 6 fibres
12
6
ST-Style Snap-In-Module, 12 fibres
24
12
SC Snap-In-Module, 6 fibres
12
6
SC Snap-In-Module, 12 fibres
24
12
MT-RJ Snap-In-Module, 12 fibres
24
12
LC Snap-In-Module, 12 fibres
24
12
SC to MPO Cassette, 12 fibres
24
12
MT-RJ to MPO Cassette, 24 fibres
48
24
LC to MPO Cassette, 12 fibres
24
12
Wall Mount Enclosures
Fibre Optic Cabling
Wall Mount Enclosure for 4 Modules, Unloaded, No Side Door
Product Facts:
●
●
●
●
●
Accepts 4 Snap-In-Modules (see page 61/62)
Integral hasp for use with off-the-shelf padlocks
Designed for intrabuilding or campus backbone applications
Recessed, easy-to-use door latches
Dimensions (for exact measurements consult customer drawings):
12 (30 cm) H x 3 (7,7 cm) D x 12 (30 cm) W
Description
Part Number
Wall mount enclosure, unloaded
0-1435128-1
Description
Fibre Density
Duplex Port Density
ST-Style Snap-In-Module, 6 fibres
24
12
ST-Style Snap-In-Module, 12 fibres
48
24
SC Snap-In-Module, 6 fibres
24
12
SC Snap-In-Module, 12 fibres
48
24
MT-RJ Snap-In-Module, 12 fibres
48
24
LC Snap-In-Module, 12 fibres
48
24
SC to MPO Cassette, 12 fibres
48
24
MT-RJ to MPO Cassette, 24 fibres
96
48
LC to MPO Cassette, 12 fibres
48
24
Wall Mount Enclosure for 4 Modules, Unloaded, With Side Door
Product Facts:
●
●
●
●
●
●
●
●
●
Accepts 4 Snap-In-Modules (see page 61/62)
Optional lock available
Optional grommets available
Designed for intrabuilding or campus backbone applications
Reversible cable strain relief bracket
Internal cable management rings and securing devices
Loop storage for distribution cables
Recessed, easy-to-use door latches
Dimensions (for exact dimensions consult customer drawing):
15 (38 cm) H x 4 (10 cm) D x 13.5 (34 cm) W
Description
Part Number
Wall mount enclosure, unloaded
0-0559561-2
Grommets
0-0559496-2
Lock
0-0559501-2
Description
Fibre Density
Duplex Port Density
ST-Style Snap-In-Module, 6 fibres
24
12
ST-Style Snap-In-Module, 12 fibres
48
24
SC Snap-In-Module, 6 fibres
24
12
SC Snap-In-Module, 12 fibres
48
24
MT-RJ Snap-In-Module, 12 fibres
48
24
LC Snap-In-Module, 12 fibres
48
24
SC to MPO Cassette, 12 fibres
48
24
MT-RJ to MPO Cassette, 24 fibres
96
48
LC to MPO Cassette, 12 fibres
48
24
http://www.ampnetconnect.com/EMEA
65
Wall Mount Enclosures
Fibre Optic Cabling
Wall Mount Enclosure for 6 Modules, Unloaded, With Side Door
Product Facts:
●
●
●
●
●
●
●
●
Accepts 6 Snap-In-Modules (see page 61/62)
Optional lock available
Optional grommets available
Splice tray holder kit available
Designed for intrabuilding or campus backbone applications
Reversible cable strain relief bracket
Recessed, easy-to-use door latches
Dimensions (for exact dimensions consult customer drawing):
16.5 (40 cm) H x 14 (35.5 cm) D x 5 (13 cm) W
Description
Part Number
Unloaded wall mount enclosure
0-1278755-1
With grommets and cable glands
0-1278755-3
With grommets, cable glands and splice tray holder
0-1278755-4
Splice tray holder kit
0-1374526-1
Grommets
0-0559496-2
Lock
0-0559501-2
Description
Fibre Density
Duplex Port Density
ST-Style Snap-In-Module, 6 fibres
36
12
ST-Style Snap-In-Module, 12 fibres
72
36
SC Snap-In-Module, 6 fibres
36
12
SC Snap-In-Module, 12 fibres
72
36
MT-RJ Snap-In-Module, 12 fibres
72
36
LC Snap-In-Module, 12 fibres
72
36
SC to MPO Cassette, 12 fibres
72
36
MT-RJ to MPO Cassette, 24 fibres
144
72
72
36
LC to MPO Cassette, 12 fibres
Wall Mount Enclosure, Loaded
Product Facts:
●
●
●
●
Integral hasp for use with off-the-shelf padlocks
Designed for intrabuilding or campus backbone applications
Recessed, easy-to-use door latches
Dimensions (for exact measurements consult customer drawings):
12 (30 cm) H x 3 (7,7 cm) D x 12 (30 cm) W
Description
66
http://www.ampnetconnect.com/EMEA
Fibre
Density
Duplex Port
Density
Part Number
With 12 ST-Style Multimode adapters
12
6
0-1435129-1
With 24 ST-Style Multimode adapters
24
12
0-1435129-2
With 6 SC Duplex Multimode adapters
12
6
0-1435130-1
With 12 SC Duplex Multimode adapters
24
12
0-1435130-2
Wall Mount Enclosures
Product Facts:
●
●
●
●
Accept up to 4 hingeable splice trays
Max. 48 splices from 900 to 250 µm
Max. 96 splices from 250 to 250 µm
Dimensions: 42 x 14 x 35 cm (W x D x H)
Description
Part Number
FibrBoss Wall Mount Enclosure
D24193-000
FibrBoss splice tray for 24 splices with ANT splice protectors
321442-000
FibrBoss splice tray for 24 splices with SMOUV splice protectors
032054-000
FIST Wall Mount Splice Enclosure, Building Entrance Point
Product Facts:
●
●
●
●
Building entrance point to connect outside cabling to inhouse cabling
Max. 96 fibres
16 universal mounting system units (UMS)
Dimensions: 22 x 11 x 32,5 cm (W x D x H)
Description
UMS units
Part Number
FIST MB2-S wall mount splice enclosure
16
406222-000
FIST SOSA2 splice module for 12 SMOUV splice protectors
2
536788-000
FIST SOSA2 splice module for 12 ANT splice protectors
2
124962-000
FIST SOSA2 single fibre splice module for max. 4 SMOUV splice protectors
1
377602-000
FIST SOSA2 single fibre splice module for max. 4 ANT splice protectors
1
887646-000
Fibre Optic Cabling
FibrBoss Wall Mount Splice Enclosure, with Hingeable Splice Trays
FOSC In-Line Splice Closure for Outside Cabling
Product Facts:
●
●
●
●
Environmentally sealed enclosure for fibre management in
outside/campus cabling systems
Aerial, underground or direct buried applications
Cold sealing with gel
Incl. FOSC-500AA splice tray for max 24 splices
Description
Part Number
FOSC In-line splice closure for 24 ANT splice protectors
909090-000
FOSC In-line splice closure for 24 SMOUV splice protectors
861528-000
http://www.ampnetconnect.com/EMEA
67
Connectivity
Fibre Optic Cabling
MT-RJ Jacks
Product Facts
●
●
●
●
●
Field installable MT-RJ Jack with 2 pre-terminated fibres
No epoxy, no polish, no crimp
Can be re-terminated
Jack version eliminates the need for a separate adapter
With bend limiting boot and SL housing
For more
Information
see page 127
MT-RJ Workstation Jacks
Product Facts:
●
●
●
-X
Color
-1
-2
-3
-4
-5
-6
-7
-8
-9
almond
black
white
grey
orange
blue
red
yellow
green
For installation on 900 µm tight buffered fibre
Re-usable, with bendlimiting boot
SL housing white, other colors available (see table)
Description
Part Number
50/125 µm
0-1278414-1
62,5/125 µm
0-1278415-1
10 GBit XG
1-1278414-2
SL housings
0-1374416-X
MT-RJ Secure Workstation Jacks
Product Facts:
●
●
●
●
-X
Color
-1
-2
-3
-4
red
yellow
green
blue
Color-coded
Features keyed jacks and plugs
to limit access to secure networks
For installation on 900 µm tight buffered fibre
Secured, keyed patch cords see page 81
Description
Part Number
50/125 µm
0-1278811-X
62,5/125 µm
0-1278810-X
For termination tool kits see page 105 ff
68
http://www.ampnetconnect.com/EMEA
Connectivity
Fibre Optic Cabling
MT-RJ Panel Jacks
Product Facts:
●
●
Fits in AMP NETCONNECT MT-RJ patch panel
Optional bend limiting boot
Description
Fibre/Buffer type
Packaging
Part Number
50/125 µm
for 250 µm coated fibre
6
0-1278303-1
62,5/125 µm
for 250 µm coated fibre
6
0-1278303-2
10 GBit XG
for 250 µm coated fibre
6
0-1278303-4
50/125 µm
for 900 µm buffered fibre
6
0-1588880-1
62,5/125 µm
for 900 µm buffered fibre
6
0-1588880-2
10 GBit XG
for 900 µm buffered fibre
6
0-1588880-3
Bend limiting boot
–
6
0-1374208-2
MT-RJ Secure Panel Jacks
Product Facts:
●
●
●
●
●
Color coded
Features keyed jacks and plugs
to limit access to secure networks
Fits in AMP NETCONNECT MT-RJ patch panel
Optional bend limiting boot
Secured, keyed patch cords see page 81
-X
Color
-1
-2
-3
-4
red
yellow
green
blue
Description
Fibre/Buffer type
Packaging
Part Number
50/125 µm
for 250 µm coated fibre
6
0-1278807-X
62,5/125 µm
for 250 µm coated fibre
6
0-1278808-X
10 GBit XG
for 250 µm coated fibre
6
0-1693951-X
50/125 µm
for 900 µm buffered fibre
6
0-1588879-X
62,5/125 µm
for 900 µm buffered fibre
6
0-1588878-X
10 GBit XG
for 900 µm buffered fibre
6
0-1693949-X
For termination tool kits see page 105 ff
http://www.ampnetconnect.com/EMEA
69
Connectivity
boot 3,0 mm
➛
boot 0,9 mm
Product Facts
➛
●
connector body
crimp eyelet
●
➛
➛
●
●
dust cover
●
➛
Fibre Optic Cabling
ST-Style Connector Kits
●
●
●
High performance pre-radiussed ferrules
ST-Style compatible bayonet coupling
Multimode or singlemode
Durability: 0,2 dB change after 1000 cycles (MM)
Temperature range: –20 °C to +75 °C
Insertion loss typ. < 0,3 dB
Available in DieCast and overmolded (OVM) version
For tools see page 108 ff.
Ferrule
Connector body/bayonet
3 mm boot
0,9 mm boot
Crimp eyelet
Fibre type
Packaging
Part Number
Ceramic
OVM/Metal
no
no
yes
MM
1000
0-0503676-1
Ceramic
OVM/Metal
yes
no
yes
MM
1000
0-0503677-1
Ceramic
DieCast/Metal
yes
no
yes
SM
1000
0-0502580-2
Ceramic
DieCast/Metal
no
yes
yes
SM
1000
0-0503613-2
Bend limiting boots, package quantity 100
Cable boot, short, 3 mm, black Part Number 0-0501457-1
Cable boot, short, 3 mm, red
Part Number 1-0501457-0
Buffer boot, 0,9 mm, black
Part Number 0-0503628-2
SC Connector Kits
Product Facts
●
●
●
●
●
●
●
●
High performance pre-radiussed ferrules
SC compatible JIS C-5973
Multimode or singlemode
Durability: 0,2 dB change after 1000 cycles (MM)
Temperature range: –40 °C to +85°C
Insertion loss typ. < 0,2 dB
Available in simplex and duplex
For tools see page 108 ff.
Type
Ferrule
3 mm boot
0,9 mm boot
Crimp eyelet
Fibre type
Simplex
Ceramic
yes
no
yes
MM
10
0-0503948-1
Part Number
Simplex
Ceramic
yes
no
yes
SM
10
0-0504646-2
Duplex
Ceramic
yes
no
yes
MM
10
0-0504657-1
Duplex
Ceramic
yes
no
yes
SM
10
0-0504655-1
Bend limiting boots, package quantity 1000
Cable boot, short, 3 mm, black
Cable boot, short, 3 mm, red
Cable boot, short, 3 mm, beige
Buffer boot, 0,9 mm, black
Buffer boot, 0,9 mm, beige
70
Packaging
Part
Part
Part
Part
Part
http://www.ampnetconnect.com/EMEA
Number
Number
Number
Number
Number
1-0503971-0
1-0503971-1
0-0503971-1
0-1457493-3
0-1457493-9
Clips for making one Duplex SC
out of two Simplex.
(2 Clips needed.)
Part Number 0-1348522-1
Connectivity
Product Facts:
● Multimode and singlemode (Telcordia
●
●
●
●
GR-326 tested)
Universal connector body:
– common body for simplex or duplex
– common body for jumper or buffer applications
Field installable duplex clip
Tensile proof strength doubled
Improve side load strength
Type
Ferrule
Fibre type
Packaging
Part Number
Simplex
Ceramic
MM
1
0-1588705-1
Simplex
Ceramic
SM
1
0-1588709-1
Duplex
Ceramic
MM
1
0-1588707-1
Duplex
Ceramic
SM
1
0-1588711-1
Clip for making a Duplex LC
out of 2 Simplex.
Part Number 0-1374728-2 (beige)
Part Number 0-1374728-1 (blue)
http://www.ampnetconnect.com/EMEA
Fibre Optic Cabling
LC-Style Connector Kits
71
Connectivity
Fibre Optic Cabling
Adapters SC Duplex/ST-Style
Product Facts:
●
Suitable for any ST-style and SC connector
●
Available for singlemode and multimode
Housing
Sleeve
Color
Mounting
Application
Plastic
Metal
almond
Clip/Screw
MM
Plastic
Ceramic
almond
Clip/Screw
Plastic
Ceramic
blue
Clip/Screw
Packaging
Part Number
10
0-0504663-4
MM
10
0-0503137-6
SM
10
0-0503137-5
Adapters SC Simplex/ST-Style
Product Facts:
●
Suitable for any SC simplex connector
●
Available for singlemode and multimode
Housing
Sleeve
Color
Mounting
Application
Packaging
Part Number
Plastic
Metal
almond
Clip/Screw
MM
10
0-0502780-3
Plastic
Ceramic
blue
Clip/Screw
SM
10
0-0502780-5
Plastic
Ceramic
almond
Clip/Screw
MM
10
0-0502780-6
Packaging
Adapters ST-Style Simplex/ST-Style Simplex 2,5 mm Bayonet
Product Facts:
72
http://www.ampnetconnect.com/EMEA
●
Suitable for any ST-style simplex connector
●
Available for singlemode and multimode
Housing
Sleeve
Color
Mounting
Application
Metal
Metal
–
–
MM
Metal
Metal
–
–
Metal
Ceramic
–
–
Metal
Polymer
–
–
Part Number
1
0-0504021-1
MM
50
0-0504021-2
SM
50
0-0502750-1
MM
1
0-0501381-1
Connectivity
Product Facts:
●
Suitable for any SC duplex connector
●
Available for singlemode and multimode
Housing
Sleeve
Color
Mounting
Application
Plastic
Metal
almond
Clip/Screw
MM
Packaging
10
0-0504640-1
Part Number
Plastic
Ceramic
blue
Clip/Screw
SM
10
1-0502776-1
Plastic
Ceramic
almond
Clip/Screw
MM
10
1-0502776-2
Adapters SC Simplex/SC Simplex
Product Facts:
●
Suitable for any SC simplex connector
●
Available for singlemode and multimode
Housing
Sleeve
Color
Mounting
Application
Plastic
Metal
almond
Clip/Screw
MM
Packaging
10
0-0504614-1
Part Number
Plastic
Ceramic
blue
Clip/Screw
SM
10
1-0502632-1
Plastic
Ceramic
almond
Clip/Screw
MM
10
1-0502632-2
Fibre Optic Cabling
Adapters SC Duplex/SC Duplex
Adapters SC-APC/SC-APC
Product Facts:
●
Suitable for any SC-APC connector
●
Available in Singlemode
Simplex
Housing
Sleeve
Color
Mounting
Application
Packaging
Part Number
Plastic
Ceramic
green/with strap
Clip/Screw
SM
10
4-0106901-4
Plastic
Ceramic
green/without strap
Clip/Screw
SM
10
2-0106901-6
Duplex
Housing
Sleeve
Color
Mounting
Application
Plastic
Ceramic
green
Clip/Screw
SM
Packaging
10
Part Number
2-0502776-3
http://www.ampnetconnect.com/EMEA
73
Connectivity
Fibre Optic Cabling
Adapters LC Duplex/LC Duplex
Product Facts:
●
Suitable for any LC duplex connector
●
Fits in any SC-Simplex cut-out
●
Available for singlemode and multimode
Housing
Sleeve
Color
Mounting
Application
Packaging
Part Number
Plastic
Ceramic
blue
Clip/Screw
SM
10
0-1457567-4
Plastic
Metal
almond
Clip/Screw
MM
10
0-1457567-8
Plastic
Ceramic
green
Clip/Screw
SM
10
0-1457567-6
Plastic
Ceramic
almond
Clip/Screw
MM
10
0-1457567-5
Adapters MT-RJ/MT-RJ
Product Facts:
●
Suitable for MT-RJ connectors (1 connector with guide pins, the other without pins)
●
Duplex coupler fits in SC duplex cut out
●
Available for singlemode and multimode
Simplex
Housing
Sleeve
Color
Mounting
Application
Packaging
Plastic
–
almond
Clip/Screw
MM/SM
Housing
Sleeve
Color
Mounting
Application
Plastic
–
almond
Clip/Screw
MM
10
0-1374906-1
Plastic
–
blue
Clip/Screw
SM
10
0-1374906-5
1
Part Number
0-1200502-1
Duplex
74
http://www.ampnetconnect.com/EMEA
Packaging
Part Number
Connectivity
Mechanical Quick Termination
Product Facts:
The CORELINK splice is easy to use,
high performance mechanical splice for
125 µm singlemode and multimode fibres.
Its unique clamping mechanism is
activated with a simple key, no other tool
is required. The splice is remateable-either
fibre can be removed and replaced in the
splice at any time.
●
●
●
●
●
●
●
No fusion splice necessary
Torsion resistant
Bellcore TR-765 tested
For multimode and singlemode
For tight buffer, semi tight and loose tube
For 250 µm coating and 900 µm buffer
Cleaving tools see page 108
Instruction sheet for CORELINK
CORELINK splice
english
Part Number 408-4019
Technical Data (Singlemode and Multimode)
Color
Insertion loss typical (dB)
Return loss typical (dB)
Transparent
≤ 0,1
– 55
Transparent blue
≤ 0,3
N/A
Application
Temperature range
Dimensions
SM
–40 °C to +80 °C
51 x 7,6 x 3,3 mm
MM
–40 °C to +80 °C
51 x 7,6 x 3,3 mm
CORELINK Splices
Product Facts:
●
Mechanical splice
●
re-usable
Fibre Optic Cabling
AMP CORELINK Mechanical Splice
Replacement
keys
Description
Part Number
12 CORELINK Splices for multimode
0-0503901-1
12 CORELINK Splices for singlemode
0-0503577-1
2 Replacement keys in key holder
0-0503681-1
Splice Holder for CORELINK Splices
Product Facts:
●
31,8 x 61,0 mm Elastomer holder for 6 or 12 CORELINK splices
●
For mount in splice boxes or in distribution boxes
Description
Part Number
Splice holder for 6 CORELINK splices
0-0559066-1
Splice holder for 12 CORELINK splices
0-0559087-1
Workstation for CORELINK Splices
Product Facts:
●
For easy and safe installation of the CORELINK splices
Description
Part Number
CORELINK Workstation
0-0503605-1
http://www.ampnetconnect.com/EMEA
75
Connectivity
Fibre Optic Cabling
AMP LightCrimp Plus Connectors
Product Facts:
● Easiest and quickest fibre termination
(less than one minute)
● Factory polished for consistent high
quality and finish (no paper required)
● No epoxy, curing or UV-light required
● Available for ST-Style, SC and LC
● Complies with the relevant TIA/EIA,
IEC, CECC und EN/IS standards
Technical Data
Ferrule
Insertion loss typical (dB)
Temperature range
Ceramic
0,3
–10 °C bis +60°C
Instruction Sheet LightCrimp Plus
For more Information see p. 127
LightCrimp Plus ST-Style english
LightCrimp Plus SC english
LightCrimp Plus LC english
Part Number 411-4457
Part Number 411-4471
Part Number 408-8925
LightCrimp Plus ST-Style Connectors
Product Facts:
●
●
●
ST-Style Connectors
Ceramic ferrule
With pre-installed and pre-polished fibre
Fibre
Packaging
Part Number
Simplex 50/125 µm
10
0-1278082-1
Simplex 62,5/125 µm
10
0-0492642-1
LightCrimp Plus SC Connectors
Product Facts:
For more
Information
see page 127
●
●
●
Clips to connect two 2 SC simplexto one SC duplex connector.
(2 clips needed)
Part Number 0-1348522-1
SC connector (simplex or duplex)
Ceramic ferrule
With pre-installed and pre-polished fibre
Fibre
Packaging
Part Number
Simplex 50/125 µm
10
0-1278079-1
Simplex 62,5/125 µm
10
0-0492643-1
Simplex 10 GBit XG 50/125 µm
10
0-1588291-1
Simplex 9/125 µm (250 µm + 900 µm only)
10
0-1693276-1
Duplex 50/125 µm
10
0-1278080-1
Duplex 62,5/125 µm
10
0-1278009-1
Duplex 10 GBit XG 50/125 µm
10
0-1588292-1
Duplex 9/125 µm (250 µm + 900 µm only)
10
0-1693278-1
LightCrimp Plus LC Connectors
Product Facts:
●
●
For more
Information
see page 127
●
LC connector (simplex or duplex)
Ceramic ferrule
With pre-installed and pre-polished fibre
Fibre
Packaging
Part Number
Simplex 50/125 µm
10
0-1754483-2
Simplex 62,5/125 µm
10
0-1754483-1
Simplex 10 GBit XG 50/125 µm
10
0-1754483-3
Clip for making a Duplex LC
out of 2 Simplex.
Simplex 9/125 µm (250 µm + 900 µm only)
10
0-1754482-1
Duplex 50/125 µm
10
0-1754485-2
Duplex 62,5/125 µm
10
0-1754485-1
Part Number 0-1374728-2 (beige)
Part Number 0-1374728-1 (blue)
Duplex 10 GBit XG 50/125 µm
10
0-1754485-3
Duplex 9/125 µm (250 µm + 900 µm only)
10
0-1754484-1
For Termination tool kits see page 105 ff
76
http://www.ampnetconnect.com/EMEA
Connectivity
Product Facts:
● No epoxy, just polish
● Cleave, crimp, polish and connect
● High performance pre-radiussed ferrules
● Reduced polishing time
●
●
Each connector comes in a kit containing
accessories needed to terminate to 900 µm
buffer, 250 µm coating and 3 mm cable
Compliant with TIA/EIA, IEC, CECC and
EN standards
Technical Data
Ferrule
Insertion loss (dB)
Temperature range
Ceramic
0,15
–40 °C to +85 °C
Stainless steel
0,15
–25 °C to +85 °C
Instruction Sheet for LightCrimp
LightCrimp ST-Style english
LightCrimp SC english
Part Number 411-9860
Part Number 411-4066
LightCrimp Connector ST-Style
Product Facts:
●
●
●
ST-Style connector
Multimode and singlemode
With strain relief and crimp eyelet
Fibre
Ferrule
Packaging
Fibre Optic Cabling
AMP LightCrimp Connector
Part Number
Multimode
Ceramic
1
0-0504600-1
Multimode
Ceramic
100
0-0503902-1
Multimode
Stainless steel
1
0-0504034-1
Singlemode
Ceramic
100
0-0504000-1
LightCrimp Connector SC
Product Facts:
●
●
●
SC connector (simplex or duplex)
Ceramic ferrule
With strain relief and crimp eyelet
Fibre
Ferrule
Packaging
Part Number
Simplex MM
Ceramic
10
0-0503692-1
Duplex MM
Ceramic
10
0-0503693-1
Clips to connect two SC simplex connectors to
one SC duplex connector (2 clips needed).
Part Number 0-1348522-1
For Termination tool kits see page 105 ff
http://www.ampnetconnect.com/EMEA
77
Wall Outlets
Fibre Optic Cabling
Wall Outlets for Dado Trunking
Product Facts:
●
●
●
●
Adapter Type
Unpopulated
ST-Style
ST-Style/SC
SC
MT-RJ
Application
Available color codes: RAL 1013 (almond)
RAL 9010 (pure white)
Plastic housing
Available in unpopulated versions and with
pre-loaded adapters
Installation accessories see page 95
Description
Sleeve
●
Wall outlet for all
Fibre-to-the-Desk applications
Y-
Color
02-
almond
pure white
Color
Part Number
DIN Outlet, for SC Duplex or SC/ST-Style Duplex Adapter
N/A
see table
Y-0966936-2
DIN Outlet, for 2 x MT-RJ Jacks
N/A
see table
Y-0966936-5
“Mosaic” Outlet 45 x 45 mm, for SC-Duplex, ST-Style or MT-RJ
N/A
pure white
0-0183931-1
DIN Outlet, 1 x ST-Style Duplex
Metal
see table
Y-0969732-1
DIN Outlet, 2 x ST-Style Duplex
Metal
see table
Y-0969733-6
DIN Outlet, 1 x ST-Style/SC-Duplex
Metal
see table
Y-0969733-3
DIN Outlet, 2 x ST-Style/SC-Duplex
Metal
see table
Y-0969733-4
DIN Outlet, 1 x SC-Duplex
Metal
see table
Y-0969733-1
DIN Outlet, 2 x SC-Duplex
Metal
see table
Y-0969733-2
DIN Outlet, 2 x MT-RJ Jacks 50/125 µm incl. cable management
N/A
almond
1-1534780-2
DIN Outlet, 2 x MT-RJ Jacks 50/125 µm incl. cable management
N/A
pure white
1-1534780-4
DIN Outlet, 2 x MT-RJ Jacks 62,5/125 µm incl. cable management
N/A
almond
1-1534780-1
DIN Outlet, 2 x MT-RJ Jacks 62,5/125 µm incl. cable management
N/A
pure white
1-1534780-3
Outlets for Ackermann Floor Boxes
Product Facts:
● For Ackermann floor boxes GESB and GES9B
● For mounting frames (see page 95)
substituting Ackermann Snap-In floor box
● Color: beige
Ackermann is a Trademark
of Honeywell
Description
Sleeve
Application
Packaging
Part Number
1x SC Duplex Adapter
Metal
2x SC Duplex Adapter
Metal
MM
10
0-0969999-1
MM
10
0-0969999-2
1x SC-ST-Style Duplex Adapter
2x SC-ST-Style Duplex Adapter
Metal
MM
10
0-0969999-3
Metal
MM
10
0-0969999-4
1x ST-Style Duplex Adapter
Metal
MM
10
0-0969999-5
2x ST-Style Duplex Adapter
Metal
MM
10
0-0969999-6
2x SC-ST-Style Duplex Adapter Metal
Metal
MM
10
0-0969999-7
2x SC-ST-Style Duplex Adapter Metal
Ceramic
SM
10
0-0969999-8
2x MT-RJ Jacks
unpopulated
MM
10
0-0966474-1
Cable Management for 2 Port Wall Outlets
Product Facts:
●
●
78
http://www.ampnetconnect.com/EMEA
Cable management with strain relief for the cable
For all DIN style wall outlets (see above)
Description
Part Number
Cable management
0-1534332-1
Cable Assemblies / Technical Data
Fibre Optic Cabling
Technical Data
SC and ST-Style Assemblies
MT-RJ Assemblies
LC Assemblies
Cable sheath:
LSZH
Cable sheath:
LSZH
Cable sheath:
LSZH
Cable diameter:
2,5 mm Twin Zip
Cable diameter:
1,8 mm Mini Twin Zip
Cable diameter:
1,8 mm Mini Twin Zip
Buffer:
0,9 mm EasyStrip
Buffer:
0,6 mm
Buffer:
0,6 mm
Ferrule:
Ceramic
Ferrule:
Thermoset
Ferrule:
Ceramic
All assemblies are factory tested and come with a test protocol.
All assemblies are machine polished providing highest quality with
controlled endface specifications.
For more
Information
see page 127
For all
OM3 XG
cable
assemblies
Singlemode Patchcords and Pigtails
Connector type
Tuned
Insertion loss, typ.
Insertion loss, max.*
Return loss, min.
Temp.-Range
SC, PC
No
0,2 dB
0,5 dB
> 45 dB
–25 °C/+70 °C
SC, PC
Yes
0,15 dB
0,5 dB
> 45 dB
–25 °C/+70 °C
SC, APC, 8°
No
0,15 dB
0,3 dB
> 65 dB
–25 °C/+70 °C
SC, APC, 8°
Yes
0,15 dB
0,5 dB
> 65 dB
–25 °C/+70 °C
SC, APC, 9°
No
0,15 dB
0,3 dB
> 70 dB
–25 °C/+70 °C
SC, APC, 9°
Yes
0,15 dB
0,5 dB
> 70 dB
–25 °C/+70 °C
ST-Style, PC
No
0,2 dB
0,5 dB
> 45 dB
–25 °C/+70 °C
ST-Style, PC
Yes
0,15 dB
0,5 dB
> 45 dB
–25 °C/+70 °C
MT-RJ
No
0,3 dB
0,75 dB**
> 35 dB
–10 °C/+60 °C
LC, PC
No
0,1 dB
0,5 dB
> 55 dB
–25 °C/+70 °C
LC, PC
Yes
0,1 dB
0,3 dB
> 55 dB
–25 °C/+70 °C
* against reference
** random mated
Multimode Patchcords
Connector type
Insertion loss, max.*
Return loss, min.
Temp.-Range
SC, PC
0,3 dB
> 20 dB
–10 °C/+60 °C
ST-Style, PC
0,3 dB
> 20 dB
–10 °C/+60 °C
MT-RJ**
0,5 dB
> 20 dB
–10 °C/+60 °C
LC, PC
0,3 dB
> 20 dB
–10 °C/+60 °C
* against reference
** random mated
http://www.ampnetconnect.com/EMEA
79
Pigtails
Fibre Optic Cabling
MT-RJ Jack Pigtails
Product Facts:
●
●
●
Fits in all AMP NETCONNECT MT-RJ patch panels
colored housing optional available
Technical specifications see page 79
Type
MT-RJ Jack Pigtail MM
Fibre
Color
50/125 µm
black
MT-RJ Jack Pigtail MM
62,5/125 µm
MT-RJ Jack Pigtail SM
9/125 µm
MT-RJ Jack Pigtail MM
10 GBit XG, 50/125 µm
Single housing
–
Length
Part Number
3m
0-1348942-1
black
3m
0-1348941-1
blue
3m
0-1391366-1
black
3m
0-1536556-1
see table
–
0-1374416-X
-X
Color
-1
-2
-3
-4
-5
-6
-7
-8
-9
almond
black
white
grey
orange
blue
red
yellow
green
ST-Style Pigtails
Product Facts:
●
Technical specifications see page 79
Type
Fibre
Length
Part Number
ST-Style MM
50/125 µm
1m
0-0349569-2
ST-Style MM
50/125 µm
2m
0-0349569-4
ST-Style MM
62,5/125 µm
1m
0-0349582-2
ST-Style MM
62,5/125 µm
2m
0-0349582-4
Other lengths on request!
SC-Pigtails
Product Facts:
●
Other lengths on request!
Technical specifications see page 79
Type
Fibre
Length
Part Number
SC MM
50/125 µm
1m
0-0349568-2
SC MM
50/125 µm
2m
0-0349568-4
SC MM
62,5/125 µm
1m
0-0349584-2
SC MM
62,5/125 µm
2m
0-0349584-4
SC/PC SM tuned
9/125 µm
1m
0-0233582-1
SC/PC SM tuned
9/125 µm
2m
0-0233582-2
SC/PC SM untuned
9/125 µm
1m
0-0233266-1
SC/PC SM untuned
9/125 µm
2m
0-0233266-2
SC 10 GBit XG MM
50/125 µm
2m
0-1536555-2
SC 10 GBit XG (Striplength ca. 0,8 m) MM
50/125 µm
2m
0-1536561-2
LC-Pigtails
Product Facts:
●
Other lengths on request!
80
http://www.ampnetconnect.com/EMEA
Technical specifications see page 79
-X
Length
-1
-2
1m
2m
Type
Fibre
Part Number
LC MM
50/125 µm
0-1536975-X
LC MM
62,5/125 µm
0-1536974-X
LC SM tuned
9/125 µm
0-1536880-X
LC SM untuned
9/125 µm
0-1536879-X
LC 10 GBit XG, MM
50/125 µm
0-1536966-X
Patch Cords
Product Facts:
●
Technical specifications see page 79
Description
Part Number
Y- -X
Length
Standard 50/125 µm, MM
Y-1206617-X
Standard 62,5/125 µm, MM
Y-1206613-X
Standard 9/125 µm, SM
Y-1206621-X
Secure Red 50/125 µm, MM
Y-1278873-X
00001-
1
2
3
5
10
Secure Red 62,5/125 µm, MM
Y-1278890-X
Secure Yellow 50/125 µm, MM
Y-1278874-X
Secure Yellow 62,5/125 µm, MM
Y-1278891-X
Secure Green 50/125 µm, MM
Y-1278875-X
Secure Green 62,5/125 µm, MM
Y-1278892-X
Secure Blue 50/125 µm, MM
Y-1278876-X
Secure Blue 62,5/125 µm, MM
Y-1278893-X
10 GBit XG 50/125 µm, OM3, MM
Y-1536462-X
-1
-2
-3
-5
-0
m
m
m
m
m
Other lengths on request!
MT-RJ/ST-Style Duplex Patch Cords
Product Facts:
●
Technical specifications see page 79
Description
Part Number
Y- -X
Length
Standard 50/125 µm Duplex, MM
Y-1206620-X
Standard 62,5/125 µm Duplex, MM
Y-1206616-X
Secure Red 50/125 µm, MM
Y-1278881-X
Secure Red 62,5/125 µm, MM
Y-1278898-X
00001-
1
2
3
5
10
Secure Yellow 50/125 µm, MM
Y-1278882-X
Secure Yellow 62,5/125 µm, MM
Y-1278899-X
Secure Green 50/125 µm, MM
Y-1278883-X
Secure Green 62,5/125 µm, MM
Y-1278900-X
Secure Blue 50/125 µm, MM
Y-1278884-X
Secure Blue 62,5/125 µm, MM
Y-1278901-X
-1
-2
-3
-5
-0
m
m
m
m
m
Fibre Optic Cabling
MT-RJ/MT-RJ Patch Cords
Other lengths on request!
MT-RJ/SC Duplex Patch Cords
Product Facts:
●
Technical specifications see page 79
Description
Part Number
Y- -X
Length
Standard 50/125 µm Duplex, MM
Y-1206619-X
Standard 62,5/125 µm Duplex, MM
Y-1206615-X
Standard 9/125 µm Duplex, SM
Y-1206623-X
Secure Red 50/125 µm, MM
Y-1278877-X
00001-
1
2
3
5
10
Secure Red 62,5/125 µm, MM
Y-1278894-X
Secure Yellow 50/125 µm, MM
Y-1278878-X
Secure Yellow 62,5/125 µm, MM
Y-1278895-X
Secure Green 50/125 µm, MM
Y-1278879-X
Secure Green 62,5/125 µm, MM
Y-1278896-X
Secure Blue 50/125 µm, MM
Y-1278880-X
Secure Blue 62,5/125 µm, MM
Y-1278897-X
10 GBit XG Duplex, 50/125 µm, OM3, MM
Y-1536463-X
-1
-2
-3
-5
-0
m
m
m
m
m
Other lengths on request!
MT-RJ/LC Duplex Patch Cords
Product Facts:
●
Technical specifications see page 79
Description
Part Number
Y- -X
Length
50/125 µm Duplex, MM
Y-1536512-X
62,5/125 µm Duplex, MM
Y-1536513-X
9/125µm Duplex, SM
Y-1536511-X
10 GBit XG Duplex, 50/125 µm, OM3, MM
Y-1536968-X
00001-
1
2
3
5
10
-1
-2
-3
-5
-0
m
m
m
m
m
Other lengths on request!
http://www.ampnetconnect.com/EMEA
81
Patch Cords
Fibre Optic Cabling
ST-Style Duplex/ST-Style Duplex Patch Cords
Product Facts:
●
Technical specifications see page 79
Y- -X
Length
00001-
1
2
3
5
10
-1
-2
-3
-5
-0
m
m
m
m
m
Description
Part Number
50/125 µm, MM
Y-0349561-X
62,5/125 µm, MM
Y-0349574-X
9/125 µm, SM
Y-1206158-X
Other lengths on request!
SC Duplex/SC Duplex Patch Cords
Product Facts:
●
Technical specifications see page 79
Description
Part Number
Y- -X
Length
50/125 µm, MM
Y-0349565-X
00001-
1
2
3
5
10
62,5/125 µm, MM
Y-0349578-X
9/125 µm, SM
Y-1348260-X
10 GBit XG, 50/125 µm, OM3, MM
Y-1536464-X
-1
-2
-3
-5
-0
m
m
m
m
m
Other lengths on request!
SC Duplex/ST-Style Duplex Patch Cords
Product Facts:
●
Technical specifications see page 79
Y- -X
Length
00001-
1
2
3
5
10
-1
-2
-3
-5
-0
m
m
m
m
m
Description
Part Number
50/125 µm, MM
Y-0349567-X
62,5/125 µm, MM
Y-0349580-X
Other lengths on request!
SC Duplex/LC Duplex Patch Cords
Product Facts:
●
Other lengths on request!
82
http://www.ampnetconnect.com/EMEA
Technical specifications see page 79
Description
Part Number
Y- -X
Length
50/125 µm, MM
Y-1536509-X
00001-
1
2
3
5
10
62,5/125 µm, MM
Y-1536510-X
9/125 µm, SM
Y-1536508-X
10 GBit XG, 50/125 µm, OM3, MM
Y-1536967-X
-1
-2
-3
-5
-0
m
m
m
m
m
Patch Cords
Product Facts:
●
Technical specifications see page 79
Y- -X
Length
00001-
1
2
3
5
10
-1
-2
-3
-5
-0
m
m
m
m
m
Description
Part Number
50/125 µm, MM
Y-1536502-X
62,5/125 µm, MM
Y-1536503-X
9/125 µm, SM
Y-1536501-X
10 GBit XG, 50/125 µm, OM3, MM
Y-1536969-X
Other lengths on request!
Mode Conditioning Patch Cords
Product Facts:
●
●
●
●
For use of Gigabit Ethernet 1000Base-LX on MM fibres
For 50 µm and 62,5 µm fibres
LSZH sheath
Standard length 3 m or 5 m
-X
Length
-3
-5
3m
5m
Description
Part Number
SC-Duplex to SC-Duplex, 50/125 µm
0-1206820-X
SC-Duplex to SC-Duplex, 62,5/125 µm
0-1206821-X
SC-Duplex (SM) to ST-Style Duplex, 50/125 µm
0-1348269-X
SC-Duplex (SM) to ST-Style Duplex, 62,5/125 µm
0-1348271-X
MT-RJ (SM) to ST-Style Duplex, 50/125 µm
0-1536445-X
MT-RJ (SM) to ST-Style Duplex, 62,5/125 µm
0-1536444-X
MT-RJ (SM) to SC-Duplex, 50/125 µm
0-1536447-X
MT-RJ (SM) to SC-Duplex, 62,5/125 µm
0-1536446-X
SC-Duplex (SM) to MT-RJ, 50/125 µm
0-1536769-X
SC-Duplex (SM) to MT-RJ, 62,5/125 µm
0-1536770-X
http://www.ampnetconnect.com/EMEA
Fibre Optic Cabling
LC Duplex/LC Duplex Patch Cords
83
MPO Cable Assemblies
Fibre Optic Cabling
Pre-terminated MPO Trunk Cable
AMP NETCONNECT offers the products you need for quick and easy
installation of high performance data center and storage area network
applications. Combining pre-terminated cable assemblies and cassettes
makes installation as simple as “plug-and-go”: mounting the cassettes,
pulling or placing the cables, and plugging the cables into the cassettes.
Networks can be up and running in days, not weeks or months.
Product Facts:
Factory pre-terminated assemblies
● Cables terminated with high density MPO connectors
● High packing density up to 72 fibres on 1U
● Different fan out configurations
● All cords with protocol, for constant and reliable quality
● For use with MPO cassettes see page 60
● In MM and SM design
● Customer specific demands on request
● LSZH sheath
●
For more
Information
see page 127
All cable assemblies
delivered with pulling socks.
Part Number/Fibre count
Fibre
Version
12
24
48
72
96
62,5/125 µm, MM
OM1
Y-1391975-X
Y-1391978-X
Y-1391981-X
Y-1391984-X
Y-1391987-X
50/125 µm, MM
OM2
Y-1391976-X
Y-1391979-X
Y-1391982-X
Y-1391985-X
Y-1391988-X
50/125 µm, MM
OM3 (XG)
Y-1695135-X
–
Y-1695471-X
Y-1695470-X
Y-1695469-X
9/125 µm, SM
OS1
Y-1391977-X
Y-1391980-X
Y-1391983-X
Y-1391986-X
Y-1391991-X
All pairs straight. (Complete link needs one component with flipped pairs!)
Y- -X
00000-
-1
-2
-3
-4
-5
Length
10
20
30
40
50
m
m
m
m
m
Y- -X
Length
Y- -X
Length
Y- -X
Length
Y- -X
Length
Y- -X
Length
00001-
60
70
80
90
100
11111-
110
120
130
140
150
11112-
160
170
180
190
200
22222-
210
220
230
240
250
22223-
260
270
280
290
300
-6
-7
-8
-9
-0
m
m
m
m
m
-1
-2
-3
-4
-5
m
m
m
m
m
-6
-7
-8
-9
-0
m
m
m
m
m
-1
-2
-3
-4
-5
m
m
m
m
m
-6
-7
-8
-9
-0
m
m
m
m
m
MPO Fanout Cords
Product Facts:
●
●
●
Available in different lengths
LSZH sheath (Fanout cord 2 mm jacketed LSZH)
Configuration with other connector types on request
Description
Part Number
MPO to 12 x ST-Style
Description
Y- -X
Length
0112-
5,0
10,0
15,0
20,0
-5
-0
-5
-0
m
m
m
m
Part Number
MPO to 6 x MT-RJ
62,5/125 µm, MM
Y-1391961-X
62,5/125 µm, MM
Y-1391956-X
50/125 µm, OM3 (XG), MM
Y-1695459-X
50/125 µm, MM
Y-1391957-X
50/125 µm, OM3 (XG), MM
Y-1695461-X
9/125 µm, SM
Y-1391958-X
MPO to Male ST-Style
9 µm, small fanout, SM
Y-1695359-X
MPO to 12 x LC
MPO to 12 x SC
62,5/125 µm, MM
Y-1695462-X
62,5/125 µm, MM
Y-1391953-X
50/125 µm, MM
Y-1695195-X
50/125 µm, MM
Y-1391954-X
50/125 µm, OM3 (XG), MM
Y-1695464-X
50/125 µm, OM3 (XG), MM
Y-1695460-X
9/125 µm, SM
Y-1695463-X
Accessories
84
http://www.ampnetconnect.com/EMEA
MPO Coupler Receptacle
0-1588172-2
MPO Coupler Snap-In Module (6 ports)
0-1374598-1
Active Components for Ethernet LANs
4.
● PoE Midspan Units
– 8 or 24 port units
– All ports fully powered (15,4 W)
– Supports 10/100/1000Base-T
● W-LAN Access Point
– Dual Band, Tri-mode
– Corporate grade Access Point
● Ethernet Media Converters
– 10/100 MBit/s to 100Base-FX
– 10/100/1000 MBit/s to 1000Base-FX
– Auto-MDI/MDI-X detection
– SNMP Managed Converter
Ethernet LAN
Solutions
● Compact Switches
– 5, 8, 16 or 24 port
– Compact, user friendly devices
– Ideal for SOHO environments
● Smart Switches
– 8, 16 or 24 ports
– Optional fibre uplinks MT-RJ, SC, ST)
– Simple configuration using console port
– Controllable VLAN’s
– Ideal for small to medium workgroups
● SNMP Managed Switches
– 8 or 24 ports
– Optional fibre uplinks (MT-RJ, SC, ST)
– Advanced functionality
(SNMP, TELNET and VLAN’s)
– Full network management capabilities
W-LAN and PoE Equipment
86
Ethernet Media Converters
87
SNMP Managed Media Converters
88
Ethernet Compact Switches
89
Ethernet Smart Switches
90
Ethernet SNMP Managed Switches
91
Ethernet Stackable Managed Switch /Accessories
92
W-LAN and PoE Equipment
Ethernet LAN Solutions
PoE Midspan Units
Power over Ethernet (PoE) according to IEEE 802.3af defines the simultaneous provision of low voltage and Ethernet data signals over a cabling
system compliant to the ISO 11801:2002 standard. Now, remote devices
like VoIP phones, W-LAN Access Points, security devices and much more
can be powered remotely.
The AMP NETCONNECT PoE Midspan devices allow the insertion of
power into as many as 8 (8 port version) or 24 outlets (24 port version)
while providing Ethernet, Fast Ethernet and Gigabit Ethernet data.
Up to three devices of the 8 Port version or one device of the 24 port
version can be mounted into a 19, 1 U rack space.
Product Facts:
●
●
●
●
●
●
8 or 24 Port PoE Midspan Unit
IEEE 802.3af compliant
Supports 10/100/1000 MBit/s Ethernet
19" metal frame mountable
Universal 110/220 V (50/60 Hz) power supply
Full power on every port (15,4 W)
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
24 Port PoE Midspan unit
0-1591187-X
8 Port PoE Midspan unit
0-1591184-X
19" mounting frame 1 U for 3 Midspan units
0-1591185-0
Wireless LAN Access Point
The Tyco Wireless Access Point delivers a cost-effective, highly secure
and SNMP managed solution for a wide range of business, government,
hot-spot, industrial and corporate applications. With leading edge radios,
robust management and ultra-high security, this versatile access point delivers business class W-LAN support for large and medium size enterprises.
Product Facts:
●
●
●
●
●
●
●
●
●
●
86
http://www.ampnetconnect.com/EMEA
Simultaneous and seamless operation on both 2.4 GHz and the
5 GHz bands on same product
Full compliance with the IEEE802.11a, 11b and 11g standards
Data rates up to 54 MBit/s
Roaming support
Power-over-Ethernet eliminates the need for local AC power
SNMP management together with Web, Telnet and Console port
High level Encryption using WPA for standard networks
802.1x Authentication using TLS, T-TLS and MD5 for financial grade
networks
Hidden SSID facilities
-X Power Cord for
MAC Access Control Lists
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
Dual Band Wireless Access Point – SNMP Managed
0-1591700-X
Power-over-Ethernet Cable Adapter
0-1591710-X
Ethernet Media Converters
Common Features:
●
●
●
●
●
●
●
●
Easy Plug-and-Play installation
Auto negotiates the required data rate
Auto-MDI/MDI-X detection – eliminates cross-over cables
Increased network resilience through Link Loss Forwarding
Both SM and MM supported
Single fibre WDM converters supported
Rack mountable
External main power supply and rack mount kits are provided
10/100 MBit/s Ethernet Media Converter
Product Facts:
●
●
●
●
10/100 MBit/s RJ-45 Copper port
Auto-MDI/MDI-X detection
100Base-FX fibre port
Dimensions: 85 x 120 x 26 mm (W x D x H)
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
10/100M Multimode SC Media Converter
0-1591024-X
10/100M Multimode ST-Style Media Converter
0-1591026-X
10/100M Multimode MT-RJ Media Converter
0-1591028-X
10/100M Singlemode – Single Fibre WDM 1300 nm Converter
0-1591029-X
10/100M Singlemode SC Media Converter
0-1591030-X
10/100M Singlemode – Single Fibre WDM 1550 nm Converter
0-1591031-X
Gigabit Ethernet Media Converter
Ethernet LAN Solutions
Media Converters support all current Ethernet standards
and enable easy extension of 10Base-T, 100Base-TX
and 1000Base-T RJ-45 LAN circuits from routers,
switches, NICs and other Ethernet devices over optical
fibres. This allows greater distances to be covered or,
for example, the connection of two workgroups.
Support for single fibre WDM also available.
Product Facts:
●
●
●
●
10/100/1000 MBit/s RJ-45 Copper port
Auto-MDI/MDI-X detection
1000Base-SX or 1000Base-LX fibre port
Dimensions: 85 x 120 x 26 mm (W x D x H)
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
1000Base-SX (multimode) Media Converter
0-1591020-X
1000Base-LX (singlemode) Media Converter
0-1591022-X
10 Slot 19 Rack Mount Chassis System
Product Facts:
●
●
●
●
●
●
●
●
Supports up to 10 Media Converters
Different Media Converter types can be mixed
Hot-Swappable Converters
A second power supply can be fitted
Exceptionally reliable dual redundant power system
can be Hot-Swapped
Dimensions: 440 x 226 x 133 mm (W x D x H)
Internal cooling fan
Includes kit for mounting in 19 racking
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
10 Slot Chassis System with 1 Power Unit
0-1591032-X
Spare/Redundant AC Power Unit for Chassis
0-1591034-0
http://www.ampnetconnect.com/EMEA
87
Ethernet LAN Solutions
SNMP Managed Media Converters
This range of fully managed Media Converters
support all current Ethernet standards and enable
easy extension of 10Base-T, 100Base-TX and
1000Base-T RJ-45 LAN circuits from routers,
switches, NICs and other Ethernet devices over
managed optical fibres. Located in a 19” chassis
system they are ideal for telecom and corporate
applications where a number of fibre links need to
be managed and controlled from a central location.
Common Features:
●
●
●
●
●
●
●
●
●
●
Easy Plug-and-Play installation
Auto negotiate the required data rate
Auto-MDI/MDI-X detection – eliminates cross-over cables
Increased network resilience through Link Loss Forwarding
Both SM and MM fibres supported
Single fibre WDM converters supported
Rack mountable
AC and DC PSUs supported
16 individual Plug in cards supported
Management by Console, Web or SNMP
SNMP Managed Ethernet Converter Card
Product Facts:
●
●
●
●
●
●
10/100/1000 MBit/s RJ-45 Copper port
Auto-MDI/MDI-X detection
Full configuration via managed chassis
100Base-FX fibre port
Link loss forwarding
Range of fibre optic ports
Model
Part Number
1000M Multimode SX SC Media Converter
0-1591510-0
1000M Singlemode LX SC Media Converter
0-1591512-0
10/100M Multimode SC Media Converter
0-1591514-0
10/100M Multimode ST Media Converter
0-1591516-0
10/100M Multimode MT-RJ Media Converter
0-1591518-0
10/100M Singlemode SC Media Converter
0-1591520-0
10/100M Singlemode – Single Fibre WDM 1550 nm Converter
0-1591522-0
16 Slot 19” Rack Mount SNMP Chassis System
Product Facts:
●
●
●
●
●
●
●
●
●
88
http://www.ampnetconnect.com/EMEA
Supports up to 16 fully managed media converters
Management card included
Different media converter types can be mixed
Hot-swappable converters
A second power supply can be fitted
AC or 48 V DC
Exceptionally reliable dual redundant power system
can be hot-swapped
Internal cooling fans
Includes kit for mounting in 19" racking
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
16 Slot SNMP Managed Converter Chassis (AC)
0-1591500-X
Spare/Redundant AC Power Unit
0-1591504-0
Spare/Redundant DC Power Unit
0-1591506-0
Ethernet Compact Switches
Common Features:
●
●
●
●
●
10/100 MBit/s RJ-45 copper ports (UTP/STP)
Auto-negotiation
Auto-MDI/MDI-X detection – eliminates cross-over cables
Easy Plug-and-Play installation
LED’s display switch status
5 Port Compact Ethernet Switch
Product Facts:
●
●
●
●
●
●
5 RJ-45 Copper ports
All 5 ports up-linkable via auto-MDI/MDI-X detection
10/100 MBit/s
External power supply provided
Dimensions: 110 x 70 x 19 mm (W x D x H)
Weight 0.5 kg
Model
Part Number
5 Port Compact Ethernet Switch
0-1591090-X
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
8 Port Compact Ethernet Switch
Product Facts:
●
●
●
●
●
●
8 RJ-45 Copper ports
All 8 ports up-linkable via auto-MDI/MDI-X detection
10/100 MBit/s
External power supply provided
Dimensions: 164 x 100 x 26 mm (W x D x H)
Weight 0.5 kg
Model
Part Number
8 Port Compact Ethernet Switch
0-1591036-X
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Ethernet LAN Solutions
These un-managed switches are simple plug-andplay units that can be used “straight from the box”.
This makes them ideal for local workgroups, small
offices and SOHO applications.
Some switches have either a fixed or optional fibre
uplink port to enable high-speed connections to
backbones, servers and NIC cards.
16 Port Compact Ethernet Switch
Product Facts:
●
●
●
●
●
●
16 RJ-45 Copper ports
10/100 MBit/s
Internal AC auto-ranging power supply
Dimensions: 250 x 133 x 37 mm (W x D x H)
Weight 2.0 kg
Includes kit for mounting in 19 racking
Model
Part Number
16 Port Compact Ethernet Switch
0-1591070-X
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
24 Port Compact Ethernet Switch
Product Facts:
●
●
●
●
●
●
24 RJ-45 Copper ports
10/100 MBit/s
Internal AC auto-ranging power supply
Dimensions: 250 x 133 x 37 mm (W x D x H)
Weight 2.0 kg
Includes kit for mounting in 19 racking
Model
Part Number
24 Port Compact Ethernet Switch
0-1591072-X
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
http://www.ampnetconnect.com/EMEA
89
Ethernet LAN Solutions
Ethernet Smart Switches
These high performance Ethernet smart switches are
ideal for linking small workgroups or departments to
remote servers or routers using the 100 MBit/s
uplink port. These are simple to use plug-and-play
devices and can be used “straight from the box”. In
addition these smart switches can be configured
using the local RS232 console port to control functions such as VLAN assignments and port
enable/disable modes.
Common Features:
●
●
●
●
●
●
●
10/100 MBit/s RJ-45 copper ports (UTP/STP)
Auto-negotiation
Auto-MDI/MDI-X detection – eliminates cross-over cables
LED’s display switch status
Manageable via RS232 console port
Management allows Ports and VLAN’s to be controlled and
duplex modes set
Internal AC auto-ranging power supply
8 Port 10/100 MBit/s Smart Switch With Integrated Fibre Uplink
Product Facts:
●
●
●
●
●
8 RJ-45 Copper ports + 1 fibre uplink port (100Base-FX)
Dimensions: 250 x 132 x 37 mm (W x D x H)
-X Power Cord for
Weight 1.0 kg
-2 Europe
Fits 10 racking
-3 Switzerland
Kit for mounting in 19 racking
-4 Italy
-5 Denmark
available on Page 92
-7
Model
UK, Ireland
Part Number
8 Port S/UTP Smart Switch with MM SC uplink
0-1591038-X
8 Port S/UTP Smart Switch with MM ST-style uplink
0-1591040-X
8 Port S/UTP Smart Switch with MM MT-RJ uplink
0-1591042-X
8 Port S/UTP Smart Switch with SM SC uplink
0-1591044-X
16 Port 10/100 MBit/s Smart Switch II With Optional Dual Fibre Uplink
Product Facts:
●
●
●
●
●
●
16 RJ-45 Copper ports
10/100 MBit/s
Opt. 100Base-FX Fibre or Dual GBit Uplink available
Dimensions: 440 x 230 x 44 mm (W x D x H)
Weight 2.5 kg
Includes kit for mounting in 19 racking
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
16 Port S/UTP Smart Switch II
0-1591047-X
SC Multimode Fibre Plug-In Option Module
0-1591094-0
ST Multimode Fibre Plug-In Option Module
0-1591095-0
SC Singlemode Fibre Plug-In Option Module
0-1591096-0
Dual SC Gigabit Multimode SX Option Module
0-1591097-0
Dual SC Gigabit Singlemode LX Option Module
0-1591098-0
Dual Gigabit Copper 1000Base-T Option Module
2-1591019-0
24 Port 10/100 MBit/s Smart Switch II With Optional Dual Fibre Uplink
Product Facts:
●
●
●
●
●
●
90
http://www.ampnetconnect.com/EMEA
24 RJ-45 Copper ports
10/100 MBit/s
Opt. 100Base-FX Fibre or Dual GBit Uplink available
Dimensions: 440 x 230 x 44 mm (W x D x H)
Weight 2.5 kg
Includes kit for mounting in 19 racking
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
24 Port S/UTP Smart Switch II
0-1591093-X
SC Multimode Fibre Plug-In Option Module
0-1591094-0
ST Multimode Fibre Plug-In Option Module
0-1591095-0
SC Singlemode Fibre Plug-In Option Module
0-1591096-0
Dual SC Gigabit Multimode SX Option Module
0-1591097-0
Dual SC Gigabit Singlemode LX Option Module
0-1591098-0
Dual Gigabit Copper 1000Base-T Option Module
2-1591019-0
Ethernet SNMP Managed Switches
●
●
●
●
●
●
●
●
●
10/100 MBit/s RJ-45 copper ports (UTP/STP)
Auto-negotiation
Auto-MDI/MDI-X detection – eliminates cross-over cables
(not on 16 port version)
Easy Plug-and-Play installation
LED’s display switch status
Manageable via RS232 console port and web browser
Management allows Ports and VLAN’s to be controlled and
duplex modes set
Spanning Tree Protocol support
Internal AC auto-ranging power supply
8 Port 10/100 MBit/s SNMP Smart Switch With Integrated Fibre Uplink
Product Facts:
●
●
●
●
●
8 RJ-45 Copper ports + 1 fibre uplink port (100Base-FX)
Dimensions: 250 x 132 x 37 mm (W x D x H)
-X Power Cord for
Weight 1.0 kg
-2 Europe
Fits 10 racking
-3 Switzerland
-4 Italy
Kit for mounting in 19 racking
-5 Denmark
available on Page 92
-7 UK, Ireland
Model
Part Number
8 Port S/UTP SNMP Smart Switch with MM SC uplink
0-1591074-X
8 Port S/UTP SNMP Smart Switch with MM ST-style uplink
0-1591076-X
8 Port S/UTP SNMP Smart Switch with MM MT-RJ uplink
0-1591078-X
8 Port S/UTP SNMP Smart Switch with SM SC uplink
0-1591080-X
Ethernet LAN Solutions
Common Features:
These easy to install, high performance switches
support SNMP, VLAN’s and Quality-of-Service.
This capability is ideal for network managers who
want to have full control of their network and plan to
implement these switches in distributed workgroups.
24 Port 10/100 MBit/s SNMP Smart Switch With Optional Fibre Uplink
Product Facts:
●
●
●
●
●
●
●
24 RJ-45 Copper ports
10/100 MBit/s
MAC address security
2 x Optional 100 MBit/s Fibre Uplink available or
2 x Optional 1000 MBit/s Fibre Uplink available
(SX or LX)
Dimensions: 440 x 230 x 44 mm (W x D x H)
Weight 2.5 kg
Includes kit for mounting in 19 racking
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
24 Port S/UTP SNMP Smart Switch
0-1591058-X
1000Base-SX Multimode Uplink Module
0-1591060-0
1000Base-LX Multimode Uplink Module
0-1591062-0
100Base-FX Multimode SC Uplink Module
0-1591082-0
100Base-FX Multimode MT-RJ Uplink Module
0-1591084-0
100Base-FX Singlemode SC Uplink Module
0-1591086-0
100/1000Base-T Copper RJ-45 Uplink Module
0-1591088-0
http://www.ampnetconnect.com/EMEA
91
Stackable Managed Switch / Accessories
Ethernet LAN Solutions
24 Port 10/100 MBit/s Stackable Managed Switch With Optional Dual Uplink
Product Facts:
●
●
●
●
●
●
●
●
●
24 RJ-45 copper ports (UTP/STP)
10/100 MBit/s
Support IP Management Stacking
Can support 8 Units per IP Stack
Support for Single Optional 100Mbit/s Fibre Uplink
Support for Dual Gigabit Optional fibre or UTP/STP
Dimensions 440 x 161 x 44 mm (W x D x H)
Weight 2.0 kg
Includes Kit for mounting in 19 racking
-X
Power Cord for
-2
-3
-4
-5
-7
Europe
Switzerland
Italy
Denmark
UK, Ireland
Model
Part Number
24 Port Stackable Managed Switch
0-1591099-X
100Base-FX SC Multimode Fibre Plug-In Option Module
0-1591094-0
100Base-FX ST Multimode Fibre Plug-In Option Module
0-1591095-0
100Base-FX SC Singlemode Fibre Plug-In Option Module
0-1591096-0
Dual Gigabit Multimode SX Plug-In Option Module
0-1591097-0
Dual Gigabit Singlemode LX Plug-In Option Module
0-1591098-0
Dual Gigabit Copper 1000Base-T Plug-In Option Module
2-1591019-0
Rack Mount Kit
Product Facts:
●
Rack Mount kit to enable 250 mm wide devices to be installed
in 19 racking
Model
Part Number
19 Rack Mount Kit
0-1591068-0
International Power Supplies:
All products are supplied with the required power cord. To specify the correct power cord for your country substitute the number
below for the ‘-x’ suffix in the order code. The most common types are shown below – international types also available on request.
European
Standard
Suffix: -2
92
Switzerland
Suffix: -3
http://www.ampnetconnect.com/EMEA
Italy
Suffix: -4
Denmark
Suffix: -5
Great Britain
and Ireland
Suffix: -7
Universal Faceplates and Outlets
5.
● Outlet styles to meet every need
● Shielded or Unshielded Copper as well as Fibre
● Standard and Angled Outlets available
● Single, Double and Multiple Gang Outlets available
● The 5 most popular European installation
environments are represented
– DIN (Germany)
– US Standard (USA)
– BS (Great Britain)
– CH (Switzerland)
– “Mosaic” (France)
● Stainless steel faceplates for EtherSeal
Universal
Outlets/Faceplates
(unpopulated)
● A comprehensive range of accessories
is available
● Blanking plates also available
DIN Installation Environments
94
US Installation Environments
96
BS Installation Environments
98
Swiss Installation Environments
99
‘Mosaic’ Installation Environments
100
DIN Installation Environments (Germany)
Universal Outlets/Faceplates
DIN 3 Port Angled Outlet
Product Facts:
●
●
●
●
●
3 port outlet to accept up to 3 SL Series Jacks
50 x 50 mm footprint
Supplied complete with 2 removable / replaceable blanking plates
Supplied complete with back plate and label holder
Individual ports are iconable (see page 115)
Y- Color
02-
almond (RAL 1013)
pure white (RAL 9010)
Description
Part Number
50 x 50 mm DIN 3 port angled outlet without plastic frame
Y-0336613-1
50 x 50 mm DIN 3 port angled outlet with 80 x 80 mm plastic frame
Y-0336614-1
DIN Dual Angled Outlet
Product Facts:
●
●
●
●
Dual outlet to accept up to 2 SL Series Jacks
To be used with single or multiple gang DIN faceplates
Supplied complete with back plate, adapter plate and shutters
Individual ports are iconable (see page 115)
Y- Color
02-
almond (RAL 1013)
pure white (RAL 9010)
Description
Part Number
DIN Dual Angled Outlet
Y-0966936-5
DIN Standard Outlet for Recessed Mounting
Product Facts:
●
●
●
●
Outlet for recessed mounting
To be used with single or multiple gang DIN faceplates
Supplied complete with spring loaded shutter
Supplied complete with back plate
and label holder
Y- Color
02-
almond (RAL 1013)
pure white (RAL 9010)
Description
Part Number
DIN single straight outlet
Y-0966223-1
DIN dual straight outlet
Y-0966224-1
DIN 50 x 50 mm Faceplate Frame
Product Facts:
●
●
Faceplate suitable for all outlets with a 50 x 50 mm footprint
External Dimensions 80 x 80 mm
-X Color
-1
-2
-3
94
http://www.ampnetconnect.com/EMEA
pure white (RAL 9010)
almond (RAL 1013)
black (RAL 9005)
Description
Part Number
80 x 80 mm Faceplate Frame for 50 x 50 mm outlets
5-0336608-X
DIN Installation Environments (Germany)
Product Facts:
●
●
Faceplate for suitable for all outlets with a 75 x 75 mm footprint
(PEHA)
External Dimensions 80 x 80 mm
Description
Part Number
Single Faceplate Frame
Y-0964830-1
Dual Faceplate Frame
Y-0964361-2
Triple Faceplate Frame
Y-0964361-3
Y- Color
02-
almond (RAL 1013)
pure white (RAL 9010)
DIN Surface Mount Outlet Back Box
Product Facts:
●
●
●
Back Box for Surface Mounting
Available individually or as a complete kit with a single faceplate
Not suitable for use with multiple faceplates
Y- Color
02-
almond (RAL 1013)
pure white (RAL 9010)
Description
Part Number
-X Type
Surface Mount Outlet Back Box
Y-0966740-X
-1
-2
Back box only
Back box + faceplate
Universal Mounting Bracket
Product Facts:
●
●
Universal Mounting Bracket for installations into trunking
Suitable for installation into trunking with a “C-Profile”
Description
Part Number
Universal Mounting Bracket
0-0966498-1
Floor Box Bracket for Ackermann GESR 7/10
Universal Outlets/Faceplates
Single and Multiple DIN Faceplate Frames
Product Facts:
●
●
●
●
●
●
Mounting Bracket for installations into Ackermann floor boxes
Supplied complete with fixing screws
Stainless Steel bracket
Complete with strain relief handle
2 lengths available – with or without cable management
Blanking Plate available separately
Description
Part Number
Floor box Bracket
0-1394294-X
Blanking Plate (Pearl White)
0-0964719-1
-X
Type
-1
-2
-3
-4
3
3
2
2
Gang
Gang
Gang
Gang
without Management
with Management
without Management
with Management
Ackermann is a
Trademark of Honeywell
SL Jack Mounting Frame for Ackermann Floor Boxes
Product Facts:
●
●
●
●
●
●
High density SL applications in floor box environments
Angled geometry for easy cable management
Frame is iconable and provides labeling space
May be modified to suit almost any floor box application
SL Jacks with dust covers recommended for use within these frames
Patent pending
Color: black
Description
Part Number
SL Jack mounting frame
0-1711255-X
-X Color
-1
-2
6 Ports (short version)
9 Ports (long version)
Ackermann is a
Trademark of Honeywell
http://www.ampnetconnect.com/EMEA
95
US Installation Environments
Universal Outlets/Faceplates
2 Port Single Gang Work Area Outlet
Product Facts:
●
●
●
2 Port Single Gang Work Area Outlet
accepts up to 2 jacks
Single Gang format
Individual outlets are icon-able (see page 115)
-X
Color
-1
-2
-3
-4
almond
black
pure white
grey
Description
Part Number
2 Port Single Gang Work Area Outlet
0-0557505-X
Modular Jack Boxes
Product Facts:
●
●
●
●
Accepts unshielded Standard 110Connect,
any SL Series Jacks and MT-RJ
Very compact
Individual outlets are icon-able (see page 115)
Patented invisible icon holes remain invisible
when not used
-X
Color
-1
-2
-3
-4
almond
black
pure white
grey
Description
Part Number
1 Port
0-1116697-X
2 Port
0-1116698-X
SL Series Office Boxes
Product Facts:
●
●
●
●
●
Accepts unshielded SL Series Jacks and MT-RJ
Compatible with most trunking
High density
Individual outlets are icon-able (see page 115)
Patented icon holes remain invisible
when not used
-X
Color
-1
-2
-3
-4
almond
black
pure white
grey
Description
Part Number
2 Port
0-1339054-X
4 Port
0-1339057-X
Universal Office Boxes
Product Facts:
●
●
●
●
96
http://www.ampnetconnect.com/EMEA
Accepts up to 6 modular Jacks of any style
(UTP, STP and MT-RJ)
Low Profile
Cable entry on three sides and base
Individual outlets are icon-able (see page 115)
-X
Color
-1
-2
-3
-4
almond
black
pure white
grey
Description
Part Number
2 Port
0-1479488-X
4 Port
0-1479489-X
6 Port
0-1479490-X
Blanking plate
0-1479494-X
US Installation Environments
Product Facts:
●
●
Back Box for Surface Mounting
44.5 mm depth and one piece construction
simplifies installation
-X
Color
-1
-2
-3
-4
almond
black
pure white
grey
Description
Part Number
Single Gang
0-0558251-X
Blank Insert
Product Facts:
●
Blank Insert to keep dust out of unused ports
(not suitable for 110Connect Office Boxes)
-X
Color
-1
-2
-3
-4
almond
black
pure white
grey
Description
Part Number
Blank Insert (rear mounted)
0-1116412-X
EtherSeal Stainless Steel Faceplates
Product Facts:
● Available in single and double gang
● Accepts EtherSeal Jack or Coupler Kits
(not included, see pages 21 and 41)
● Sealing gasket options available
● Kit includes 2 (for single gang) or 4 (for double gang) 6/32“ screws
Description
Without Gasket
With Gasket
Single Gang 1 Port
0-1479593-1
0-1479593-2
Single Gang 2 Port
0-1479594-1
0-1479594-2
Double Gang 4 Port
0-1479595-1
0-1479595-2
Double Gang 2 + 2 Port (2 x Etherseal, 2 x SL Jacks)
0-1479596-1
0-1479596-2
Universal Outlets/Faceplates
Surface Boxes
EtherSeal Enclosures
Product Facts:
● NEMA 4 and 4X rated
● IP67 compliant when installed per instruction sheets
● For indoor and outdoor use
● Provides fully sealed remote access to data and telephone services
● Cable and conduit glands seal cable/conduit entries
Description
Cable Exits
Conduit Exits
Part Number
Enclosure, 12 x EtherSeal
12 x M16
2 x M50
0-1479654-1
Enclosure, 4 x EtherSeal
4 x M16
1 x M50
0-1479655-1
Enclosure, 2 x EtherSeal
2 x M16
1 x M40
0-1479656-1
EtherSeal Cable & Conduit Glands
Product Facts:
● Cable and conduit glands provide a way to seal cable and or
conduit entries into EtherSeal Connector Enclosures
Description
For use with
Part Number
Gland Kits M16
Cable
0-1479657-1
Gland Kits M40
3/4“ Conduit
0-1479658-1
Gland Kits M50
1“ Conduit
0-1479659-1
http://www.ampnetconnect.com/EMEA
97
BS Installation Environments (Great Britain)
Universal Outlets/Faceplates
BS Standard Shuttered Faceplate
Product Facts:
●
●
●
●
●
BS Standard faceplate
Spring loaded shutters
Supplied complete with label holder
Individual ports are icon-able (see page 115)
Dimensions 86 x 86 mm
Color: signal white (RAL 9003)
Description
Part Number
BS Single Port with Label Holder
0-0288072-1
BS Dual Port with Label Holder
0-0288004-1
BS Angled Shuttered Faceplate
Product Facts:
●
●
BS Standard angled faceplate
Dimensions 86 x 86 mm
Color: signal white (RAL 9003)
Description
Part Number
BS Angled Single Port with Label Holder
0-0442114-1
BS Angled Dual Port with Label Holder
0-0442112-1
BS 50 mm Unloaded Faceplate and Shuttered Module
Product Facts:
●
●
●
●
Unloaded faceplate accepts either 2 or 4 BS 50 mm
shuttered modules
Dimensions faceplate: 86 x 86 mm (single gang) or
145 x 86 mm (dual gang)
Single shuttered 50 mm module (spring loaded shutter)
Dimensions module: 25 x 50 mm
Color: signal white (RAL 9003)
Description
Part Number
Single gang faceplate (for 2 shuttered modules)
0-0346370-1
Dual gang faceplate (for 4 shuttered modules)
0-0346370-2
Single shuttered 50 mm Module
0-0346856-1
Blanking plate 25 x 50 mm
0-0346715-2
BS LJ6C Unloaded Faceplate and Shuttered Module
Product Facts:
●
●
●
●
Unloaded faceplate accepts either 1 or 2 LJ6C shuttered modules
Dimensions faceplate: 86 x 86 mm (single and dual port)
Single shuttered LJ6C module (spring loaded shutter)
Dimensions module: 25 x 39 mm
Color: signal white (RAL 9003)
98
http://www.ampnetconnect.com/EMEA
Description
Part Number
Single port LJ6C unloaded faceplate
0-1711301-1
Dual port LJ6C unloaded faceplate
0-1711302-1
Single shuttered LJ6C module
0-1711348-1
Swiss Installation Environments
Product Facts:
● “EDIZIOdue” Style 2 port faceplates suitable
for trunking, recessed or surface mounting
● Accepts all SL Series Jacks
● Individual ports are icon-able (see page 115)
Description
-X Color
-1
-2
-3
-4
pure white
light grey
dark grey
black
Color
Part Number
UP
see table
0-1711168-X
KNL
see table
0-1711169-X
AP
pure white
5-0101016-7
Ediziodue Compatible 3 or 4 Port
Product Facts:
Ediziodue compatible 3 port angled faceplates
suitable for trunking or recessed mounting
● Ediziodue compatible 4 port straight faceplates
● Accepts all SL Series Jacks
● Self-adhesive labels are available (see page 115)
● Individual ports are icon-able (see page 115)
●
Description
-X Color
-1
-2
pure white
black
Color
Part Number
UP, 3 port
see table
0-1711082-X
KNL, 3 port
see table
0-1711083-X
KNL, 4 port
see table
0-1711282-X
“Standard” 2 Port
Product Facts:
● “Standard” Style 2 port faceplates suitable for trunking or recessed mounting
● Accepts all SL Series Jacks
● Individual ports are icon-able (see page 115)
Description
Color
Part Number
UP
pure white
7-0101016-3
KNL
pure white
7-0101016-5
Universal Outlets/Faceplates
“EDIZIOdue” 2 Port
AP version = UP version + surface
mount backbox
“FLF” 2 Port
Product Facts:
● Dual faceplate suitable for floor box mounting
● Accepts all SL Series Jacks
Description
Color
Part Number
FLF
pure white
0-1711170-1
Accessories
Product Facts:
Accessories for specialist installation environments
●
Description
-X Color
-1
-2
pure white
black
Color
Part Number
“Prisamobile” trunking back-box (depth 45–71 mm)
black
5-0101006-9
Blanking Plate (inserted from frontside)
see table
0-1711283-X
AP – Surface mount backbox (not illustrated)
pure white
0-0101004-0
“Zargen” back-box (not illustrated)
black
3-0101019-2
http://www.ampnetconnect.com/EMEA
99
“Mosaic” Installation Environments (France)
Universal Outlets/Faceplates
Dual Outlet 45 x 45 mm Angled
Product Facts:
Dual outlet for one or two SL Jack(s) resp. one Standard 110C-Jack
with adaptor
● Incl. blank adapter if only one jack is used
-X Color
● 45 x 45 mm footprint compatible with
-1 pure white (RAL 9010)
Legrand “Mosaic”
-2 almond (RAL 1013)
● Modules are icon-able (see page 115)
●
Description
Part Number
Dual outlet 45 x 45 mm
0-0336793-X
Standard 45 x 45 mm Shuttered Module
Product Facts
Single shuttered module (spring loaded) suitable for a single jack
● 45 x 45 mm footprint compatible with Legrand “Mosaic”
● Modules are icon-able (see page 115)
●
Color: signal white (RAL 9003)
Description
Part Number
Single outlet 45 x 45 mm
0-1711277-1
Dual outlet 45 x 45 mm
0-1711276-1
45 x 45 mm Unloaded Faceplate and Half Width Shuttered Module
Product Facts
● Single half width shuttered module (spring loaded)
● 22.5 x 45 mm footprint compatible with Legrand “Mosaic”
● Unloaded 45 x 45 mm faceplate (accepts 2 modules)
Color: signal white (RAL 9003)
Description
Part Number
Single Module 22.5 x 45 mm
0-1711349-1
Faceplate Frame 45 x 45 mm (for 2 single modules)
0-1711307-1
45 x 45 mm Surface Mount Back Box
Product Facts:
● Surface Mount Back Box
● 45 x 45 mm footprint compatible with Legrand ‘Mosaic’
● Dimensions 75 x 75 mm, 48 mm deep
Color: signal white (RAL 9003)
Description
Part Number
Surface Mount Back Box 45 x 45 mm
0-0953597-1
The Modules and Faceplates depicted in this chapter can be used with the following Jacks
(please note that restrictions may apply):
SL 110Connect Jack
unshielded (p. 20)
SL Toolless Jack
unshielded (p. 20)
110Connect Jack
unshielded (p. 21)
SL Modular Coupler
(p. 21)
SL MT-RJ Workstation Jack (p. 68)
SL 110Connect Jack
shielded (p. 41)
100
SL Toolless Jack
shielded (p. 41)
http://www.ampnetconnect.com/EMEA
110Connect Jack
shielded (p. 41)
AMP-TWIST-6S SL Jack
shielded (p. 41)
Baluns, Impedance Matching Devices, Adaptors
6.
● IBM Type 1 150Ω to RJ-45 100Ω
(Ethernet or Token Ring)
● BNC 93Ω to RJ-45 100Ω
● Twinax 100Ω to RJ-45 100Ω
Installation Tools
Tools, Baluns,
Miscellaneous
● For Twisted Pair: Pliers, Crimp Tools,
Impact Tools, Cutters
● For Fibre Optic: Tool-Sets, Cleavers,
Crimp Tools, Microscopes, Epoxy, Test Kits
Cable Management
● IAllows easy routing of patch cords
in 19 racks
● For horizontal and vertical mounting
● Hi-D Connect system with integrated
bend control
Labeling Accessories
● Adhesive Labels, Labelling Software, Icons
● Quick and durable identification
Baluns
102
Twisted Pair Tools
103
Fibre Optic Tools
105
Cable Management
113
Administration/Labelling
115
Baluns, Impedance Matching Devices and Adaptors
Tools, Baluns, Miscellaneous
Impedance Matching Device IBM Type 1 to Ethernet or Token Ring
Product Facts:
● Cable-less, compact device
● 100Ω RJ-45 Jack to 150Ω 4 position data connector
● Utilization of 150Ω cabling for 100Ω interfaces
Service
Active RJ-45 Contacts
Shielding
Part Number
100Ω 10 Base-T
1/2, 3/6
no
0-0556904-1
100Ω 100 Base-TX
1/2, 3/6
yes
0-0558421-1
100Ω Token Ring
3/6, 4/5
no
0-0557674-1
Adapter Token Ring Type 1 to RJ-45
Product Facts:
● Cable-less adapter without impedance matching
● Connects 4position data connectors with RJ-45 patch cords
Service
Active RJ-45 Contacts
Shielding
Part Number
100Ω Token Ring
3/6, 4/5
no
0-0555414-2
Balun RJ-45 Jack to BNC
Product Facts:
Adaption and impedance matching of 93Ω BNC
to 100Ω RJ-45 Jack for IBM 3270 applications
● available as cable-less compact balun or
with 20 cm cable
●
Description
Part Number
-X
RJ-45 Pinout
without cable
0-0555330-X
with 20 cm coaxial cable
0-0555058-X
-1
-2
Pins 4/5
Pins 1/2
Balun RJ-45 Plug to BNC
Product Facts:
Cable balun with twisted pair cable
● Adaption and impedance matching of 93Ω BNC
to 100Ω RJ-45 Jack for IBM 3270 applications
● Length 4,2 m
●
Description
Part Number
with Twisted Pair Cable
0-0555242-X
-X
RJ-45 Pinout
-1
-2
Pins 4/5
Pins 1/2
Balun RJ-45 Jack to Twinax
Product Facts:
Compact balun without cable
● Adaption from 100Ω Twinax to 100Ω RJ-45 Jack for IBM 3270 applications
● For Active Star Hub configurations
●
102
http://www.ampnetconnect.com/EMEA
Description
Active RJ-45 Contacts
Part Number
without cable
4/5
0-0555249-1
Twisted Pair Tools
Product Facts:
●
●
●
Industry standard termination tools for 110Connect,
AMP CO Plus and other LSA+ compatible Jacks
Available as impact tool (standard or premium version)
or as non-impact tool
Tools are delivered with blade
Description
Part Number
Premium Impact Tool with Extended-Life Blade
0-1375308-1
Standard Impact Tool with Standard Blade
0-1583608-1
Non-Impact Tool with Standard Blade
0-1583236-1
Replacement Blade (Extended-Life)
0-1375309-1
Replacement Blade (Standard)
0-1375310-1
UCS Impact Tool
449526-000
Palm Tool for AMP CO Plus and 110Connect
Product Facts:
●
●
●
Palm tool for precise and safe termination
of the shielded edge connector Mark II
Also holds 110Connect jacks and SL jacks
Avoids injuries should impact tool slip
Description
Part Number
Palmtool
0-0569949-1
Pistol-Grip Field Termination Tool for SL 110C Jacks
Product Facts:
●
●
●
●
Pistol Grip Tool
Lacing fixture for UTP and STP cables
Accept up to AWG 23 solid conductor
Lacing fixture with T568A and T568B wiring
Description
Part Number
Complete Pistol Grip Tool with lacing fixture
0-0790187-1
Pistol Grip Tool – Spare Part
0-0790183-1
Lacing fixture – Spare Part
0-0790178-1
Tools, Baluns, Miscellaneous
110C Impact Tools
Handheld Field Termination Tool for SL Jacks
Product Facts:
●
●
●
●
●
●
Terminates Cat. 3, 5E + 6 SL jacks (110C & AMP-TWIST-6S)
Strips cable + terminates and cuts 8 conductors at once
Lacing fixture for 110C assures simple and efficient use
(not used for AMP-TWIST-6S)
Maintains twisted pair integrity
Reliable connections everytime
Time and cost saving
Description
Part Number
Handheld tool kit (tool and pouch) for 110C jacks (incl. fixture)
0-1725150-1
Handheld tool kit for AMP-TWIST-6S jacks (without fixture)
0-1725150-3
Separate handheld tool (spare part)
0-1725080-1
110C lacing fixture (spare part)
0-1673956-1
http://www.ampnetconnect.com/EMEA
103
Twisted Pair Tools
Tools, Baluns, Miscellaneous
AMP CO Plus Un-Locking Tool and Preparation Template
Product Facts:
●
●
Un-locks the rear cover of AMP CO Plus housings
1 : 1 scale cable preparation template for precise high quality
termination of the shielded edge connector Mark II
Description
Part Number
Un-locking tool
0-0726948-1
Preparation Template English/German
0-0336547-1
Preparation Template French/German
0-0336547-2
Separate Tools
Product Facts:
●
●
●
Easy, safe and fast cable preparation
Cyclops cuts the cable sheath only
Diagonal Cutter for precise cutting of wire
Description
Part Number
Cyclops
0-1375317-1
Diagonal Cutter
0-1116571-1
Standard Tool Set for Modular Plugs
Product Facts:
●
●
●
Complete tool set for the termination of unshielded and shielded
modular plugs
Standard version contains 2 die sets for 4, 6 and 8 position standard
modular plugs
Professional version contains 4 die sets for 4, 6 and 8 position
standard and 4 position hand set modular plugs
Description
Part Number
Standard tool set
1-0231666-0
Professional tool set
1-0231666-3
PRO-CRIMPER II Tool Set for EMT Plugs
Product Facts:
●
●
●
104
http://www.ampnetconnect.com/EMEA
Installer’s complete tool-set for field termination of high performance
EMT modular plugs
contains all tools needed: hand tool, die set, diagonal cutter and
Cyclops cable stripper
100 EMT plugs plus 20 anti-tangle boots in 6 different colors
Description
Part Number
EMT PRO-CRIMPER II Tool Set
0-1711303-1
Fibre Optic Tools
Product Facts:
●
●
●
●
Includes all tools necessary for installing MT-RJ jacks,
LightCrimp Plus ST-Style, SC, LC and LightCrimp ST-Style, SC connectors
Termination Tool kit includes:
– PRO-CRIMPER II Hand Tool and appropriate die set
– Stripper tools
– Kevlar scissor
– Cable holder
– Cleave tool
– LightCrimp Plus Termination Video CD-Rom
LightCrimp Plus Termination Video CD-Rom
also available separately, part number: 0-1374503-1
MT-RJ Termination Video CD-Rom
also available separately, part number: 0-1435138-1
Description
Part Number
Universal no epoxy termination tool kit
0-1278949-2
MT-RJ Jack Termination Tool Kit
Product Facts:
●
●
Tool kit includes:
– Soft case
– Cleave tool
– Miller strip tool
– Cable stripper
– Micro stripper
–
–
–
–
–
Kevlar scissors
MT-RJ strip length template
Actuator key
Alcohol wipes
MT-RJ Termination video CD-Rom
MT-RJ Termination video CD-Rom also available separately
(Part Number: 0-1435138-1)
Description
Part Number
MT-RJ Tool Kit
0-1278346-1
Tools, Baluns, Miscellaneous
Universal No Epoxy Termination Tool Kit
LightCrimp Plus Termination Tool Kits
Product Facts:
●
Termination Tool kit includes:
– PRO-CRIMPER II Hand Tool and appropriate die set
– Stripper tools
– Kevlar scissor
– Cable holder
– Cleave tool
– LightCrimp Plus Termination Video CD-Rom
●
LightCrimp Plus Termination Video CD-Rom also
available separately, part number: 0-1374503-1
MT-RJ Termination Video CD-Rom also available
separately, part number: 0-1435138-1
●
Description
Part Number
LightCrimp Plus ST-Style, SC, LC Connectors and MT-RJ Jack Termination Tool Kit
0-1278118-4
LightCrimp Plus SC Connector Termination Tool Kit
0-1278022-1
LightCrimp Plus ST-Style Connector Termination Tool Kit
0-0492697-1
LightCrimp Plus LC Connector Termination Tool Kit
0-1754845-1
LightCrimp Adaptive Kit
0-1754846-1
LightCrimp Upgrade Termination Kit
0-1754847-1
http://www.ampnetconnect.com/EMEA
105
Fibre Optic Tools
Tools, Baluns, Miscellaneous
LightCrimp Termination Tool Kit
Product Facts:
●
Tool kits include:
– PRO-CRIMPER II Hand Tool and appropriate die set
– Stripper tools
– Kevlar scissor
– Template strip
– Cleave tool
– Polishing bushings
– Polishing films
– Polishing plate
– Microscope as listed*
*Microscope available separately on page 109
Description
Type
Microscope
Part Number
LightCrimp SC
Termination Kit
No Microscope
0-0503706-1
LightCrimp SC
Termination Kit
Premium Microscope
0-0503706-2
LightCrimp ST-Style
Termination Kit
No Microscope
0-0503330-1
LightCrimp ST-Style
Termination Kit
Premium Microscope
0-0503330-2
LightCrimp ST-Style
Termination Kit
Pocket Microscope
0-0503330-3
LightCrimp ST-Style
Mini Tool Kit
No Microscope
0-0492322-1
LightCrimp SC and ST-Style
Termination Kit
No Microscope
0-0503957-1
LightCrimp SC and ST-Style
Termination Kit
Premium Microscope
0-0503957-2
LightCrimp SC and ST-Style
Termination Kit
Pocket Microscope
0-0503957-3
LightCrimp SC and ST-Style
Mini Tool Kit
No Microscope
0-0492543-1
LightCrimp Plus Cable Holder
Product Facts:
●
●
Stripping template and cable holder for LightCrimp Plus terminations
Included in the LightCrimp Plus tool kit
Description
Part Number
SC
0-1278023-1
ST-Style
0-0492703-1
LC
0-1754138-1
LightCrimp Universal Cleave Tool
Product Facts:
●
●
106
http://www.ampnetconnect.com/EMEA
Used in both SC and ST-Style LightCrimp Connector terminations
Included in all LightCrimp tool kits
Description
Part Number
LightCrimp Universal Cleave Tool
0-0503705-1
Fibre Optic Tools
Product Facts:
●
●
Used in MT-RJ Jack and LightCrimp Plus Connector terminations
Lifespan of blade is approximately 1000 cycles
Description
Part Number
Fibre Optic Cleave Tool
0-0492674-1
Replacement Blade
0-1278219-1
Universal Fibre Optic Cleaving Tool
Product Facts:
●
●
Applicable for all cleaving types
Lifespan of blade is appr. 3800 cleaves
Description
Part Number
Universal Fibre Optic Cleaving Tool
0-0503924-1
AMP CORELINK Splice Workstation
Product Facts:
●
For convenient installation of AMP CORELINK splices
Description
Part Number
AMP CORELINK Splice Workstation
0-0503605-1
Tools, Baluns, Miscellaneous
Fibre Optic Cleave Tool for Field Installations
PRO-CRIMPER II Hand Tool and Fibre Optic Die Sets
Product Facts:
●
Hand tool and die sets for fibre optic connectors
Description
Part Number
PRO-CRIMPER II Hand Tool
0-0058532-1
Fibre Optic Die Sets
Description
Cable Jacket Diameter
(mm)
Die Set
Hand Tool
and Die Set
ST-Style
3.0
0-0058424-1
0-0058433-4
SC
3.0
0-0503910-1
0-0503911-1
SC
2.0 & 2.4/2.5 & 3.0
0-0492025-1
0-0492026-1
1.6–2.0
0-1588175-1
–
2.0, 2.5 & 3.0
0-0492622-1
0-0492623-1
2.5 & 3.0
0-0492783-1
0-0492782-1
0.9
0-1754136-1
–
LC Epoxy
LightCrimp Plus and LightCrimp ST-Style
LightCrimp Plus and LightCrimp SC
LightCrimp Plus LC
http://www.ampnetconnect.com/EMEA
107
Fibre Optic Tools
Tools, Baluns, Miscellaneous
Separate Tools
Product Facts:
●
Stripping tools, Micro-Stripper and Kevlar scissor for easy and save
fibre preparation
Description
Part Number
Stripping tool for buffer, fibre coating and jackets
0-1278947-1
Stripping tool for cable jackets
0-1278531-1
Micro-Stripper for 900 µm buffer (mandatory for MT-RJ jack termination)
0-0492109-2
Kevlar scissor
0-0501014-1
Pro-Installer Epoxy/Polish Type Connector Termination Tool Kit
Product Facts:
●
●
Includes all tools necessary to install these connectors
(Epoxy sold separately page 111):
– ST-Style, AMP NETCONNECT SC, FSD, FC, D4, FSMA
Tool kits include (except were specified otherwise):
– PRO-CRIMPER II Hand Tool and crimping dies
– Polishing bushings
– Polishing film
– Cable and fibre strippers
– Scissors
– Scribe tool
– Microscope with tripod and power source (on page 109)
– Epoxy curing oven
Description
Part Number
Tool kit with 220 V curing oven
0-0501258-8
Tool Kit without curing oven or microscope
0-0501258-9
Epoxy/Polish Type Connector Termination Tool Kit
Product Facts:
●
●
●
108
http://www.ampnetconnect.com/EMEA
Tool kits include:
– Carrying case
– PRO-CRIMPER II Hand Tool and crimping dies
– Polishing bushings
– Polishing film
– Cable and fibre strippers
– Scissors
– Scribe tool
Kits contain polishing materials for approximately 60 connectors
(consumables can be purchased separately on page 111)
SC tool kit can also be used to install FC Connectors
Description
Part Number
SC/FC
0-0503746-7
ST-Style
0-0503746-1
Fibre Optic Tools
Product Facts:
●
●
●
●
Useful in both field and laboratory, for MM and SM
Usable with AC adapter or 2 AA batteries
Each kit includes 10x objective microscope, eyepiece (10x or 20x),
lockable carrying case and tripod stand
Following adapters included: Universal 2,5 mm (adapts SC, ST-Style,
FC, FSD, RSD), FSMA and F07
Microscope
Description
Magnification
Part Number
Microscope Kit
100x
0-0502970-2
Microscope Kit
200x
0-0502970-4
Accessories
Description
Part Number
SC/APC Adapter
0-0504618-1
MT-RJ Adapter
0-0492749-1
MPO Adapter
0-0492414-1
MPX Adapter
0-0492426-1
LC Adapter
0-1278997-1
Universal 2,5 mm Adapter
0-0502977-1
240 Volt Power Supply
0-0502968-1
Red On/Off lamp
0-0502964-1
Green On/Off lamp
0-1278471-1
Tripod
0-0502965-1
10x Eyepiece
0-0502969-1
20x Eyepiece
0-0502969-2
10–20x Zoom Eyepiece
0-0502969-3
Pocket Inspection Microscope
Tools, Baluns, Miscellaneous
Inspection Microscope Kits and Accessories
Product Facts:
●
●
●
●
100x magnification
Compact hand-held size
Built-in battery operated illumination
Microscope comes with universal 2,5 mm Adapter (for SC and ST-Style)
Description
Part Number
100x Microscope
0-1278132-1
Sapphire Tipped Scribe Tool and Accessories
Product Facts:
●
●
Long-lasting sapphire blade
Pen-type casing
Description
Part Number
Sapphire tipped Scribe Tool
0-0504064-1
Replacement Blades
0-0504290-1
http://www.ampnetconnect.com/EMEA
109
Fibre Optic Tools
Tools, Baluns, Miscellaneous
Polishing Bushings, Curing Sleeves and Strip Card Kit
Product Facts:
●
●
Polishing bushings for all polishing processes
Curing sleeves for safe oven application
Polishing Bushing 2.5 mm
Polishing Bushing SC
SC Curing Sleeve
ST-Style Curing Sleeve,
2.5 mm bayonette
Description
Used with
Notes
Part Number
Polishing bushing
Ceramic and stainless steel ST-Style connectors
Metal
0-0503337-1
Polishing bushing
Ceramic, stainless steel and Polymer composite ST-Style connectors
Black Polymer
0-0503304-1
Polishing bushing
SC Connectors
Black Polymer
0-0502631-1
Polishing bushing
SC Connectors
Metal
0-0503787-1
Curing sleeve
Ceramic, stainless steel and Polymer composite ST-Style connectors
12 pcs.
0-0502259-1
Curing sleeve
SC Connectors
1 pc.
0-0502656-1
Strip Card Kit
ST-Style and SC Connectors
–
0-0501818-1
Hand Polishing Accessories
Product Facts:
●
●
Acrylic polishing plate
Self-adhesive polishing pad
Description
Part Number
Polishing plate
0-0501197-1
Polishing pad for polymer ferrules 21 cm diameter, white, self-adhesive
0-0501523-1
Polishing pad for ceramic ferrules 21 cm diameter, white, self-adhesive
0-0501858-1
Epoxy Curing Oven
Product Facts:
●
●
●
●
●
●
110
http://www.ampnetconnect.com/EMEA
Reduces time required to cure epoxy in fibre optic connectors
Accepts all AMP NETCONNECT Fibre Optic Connectors
that require epoxy
Comes equipped to cure up to four duplex connectors and
12 simplex connectors at once
Optional blocks to allow up to 8 duplex and 24 simplex connectors
available
Variable temperature control (60°C to 125°C)
Includes thermometer and cable support bracket
Description
Part Number
Curing oven (220 Volt) incl. adapter block for 16 connectors
0-0502134-2
Adapter block for 24 single connectors
0-0502129-1
Adapter block for 8 duplex connectors
0-0502222-1
Fibre Optic Tools
Product Facts:
●
●
3 ccl capacity
Ideal for epoxy
Description
Part Number
Adhesive applicator syringe
0-0501473-3
Mixing cup
0-0502282-2
Polishing Consumables
Description
Connector Type
Epoxy-Polish
SC
Epoxy-Polish
Singlemode ST-Style
Grit Grade
Epoxy-Polish
Multimode ST-Style
LightCrimp
SC and ST-Style
Part Number
Hand Polishing Film*
–
–
–
●
15 µm
0-0228433-9
Hand Polishing Film*
●
●
●
●
5 µm
0-0228433-8
Hand Polishing Film*
–
–
●
●
1 µm
0-0228433-7
Hand Polishing Film*
●
●
●
●
0,3 µm
0-0228433-5
Hand Polishing Film**
●
●
–
–
–
0-0502748-2
Consumables Kit***
–
–
●
–
–
0-0502306-1
Consumables Kit***
●
●
–
–
–
0-0502306-2
* Packet of 10
** Packet of 5
*** Contains all consumable supplies for at least 100 connectors
EPO-TEK Epoxy
Product Facts:
●
●
●
●
●
●
Pre-measured bi-packs for consistent results
Ideal for bonding fibres and optical components
Long pot life
Heat cured and room temperature epoxy
High service temperature
Supplied in 4-gram packs
Description
EPO-TEK 353ND
Cure time/Temp.
Pot life
Color after Curing
Viscosity (cps)
Max. Temp.
Glass transition-temp.
Part Number
10 min @ 115°C
4 hr
Red
2000
200°C
124°C
0-0504035-1
Tools, Baluns, Miscellaneous
Adhesive Applicator Syringe and Polishing Films
TRA-CON® and Hysol® Epoxy
Product Facts:
●
●
●
●
General purpose epoxy for SC and ST-Style
epoxy polish connectors
Long pot life
Heat cured and room temperature epoxy
High service temperature
Application
Connectors
Cure time and
temperature
Pot life
Color
Packaging
Connectors
pro package
Part Number
For manufacturing and
field use
FDDI, ESCON,
ST-Style, FSMA
24 hr @ 25°C
2 hr @ 65°C
30 mins
30 mins
blue
25 x 2 g
250
0-0501195-4
For manufacturing and
field use
all
30 mins @ 100°C
30 mins
blue
1 x 70,8 g +
1 x 22,6 g
400
0-0502418-1
http://www.ampnetconnect.com/EMEA
111
Fibre Optic Tools
Tools, Baluns, Miscellaneous
Powermeter Launch Lead Kits for Optical Testing and Certification
Today testing of fibre optic links is more sensitive than ever.
AMP Netconnect test kits guarantee precise and replicable
fibre testing. All kits contain connectors with controlled end
faces and support testing in accordance to IS 11801.
Product Facts:
●
●
●
Multimode kit contains 1 singlemode duplex +
3 multimode duplex test leads
Singlemode kit contains 3 singlemode test leads
All kits contains:
– 2 Mandrels
– 2 coupling bushes
– Data sheet of end face geometry
– Instruction sheet
For more Information see p. 127
Description
Part Number
50 µm, MM Launch Lead
Y-1695241-X
62,5 µm, MM Launch Lead
Y-1695243-X
9 µm, SM Launch Lead
Y-1695245-X
Y- -X Connector Type
Y- -X Connector Type
Y- -X Connector Type
Y- -X Connector Type
00000-
00001-
11111-
11112-
-1
-2
-3
-4
-5
SC/PC
SC/PC
SC/PC
SC/PC
SC/PC
to
to
to
to
to
SC/PC
ST/PC
LC/PC
FC/PC
MT-RJ
-6
-7
-8
-9
-0
ST/PC
ST/PC
ST/PC
ST/PC
ST/PC
to
to
to
to
to
SC/PC
ST/PC
LC/PC
FC/PC
MT-RJ
-1
-2
-3
-4
-5
LC/PC
LC/PC
LC/PC
LC/PC
LC/PC
to
to
to
to
to
SC/PC
ST/PC
LC/PC
FC/PC
MT-RJ
-6
-7
-8
-9
-0
FC/PC
FC/PC
FC/PC
FC/PC
FC/PC
to
to
to
to
to
SC/PC
ST/PC
LC/PC
FC/PC
MT-RJ
Explanation: Connector 1 – to test equipment
Connector 2 – under test
OTDR Launch Lead Kits for Optical Testing and Certification
Product Facts:
●
●
●
●
●
To use as a launch or tail lead
Length 100 m for MM
Length 1000 m for SM
Controlled end faces
Instruction sheet
Description
Part Number
50 µm, MM Launch Lead
Y-1695240-X
62,5 µm, MM Launch Lead
Y-1695242-X
9 µm, SM Launch Lead
Y-1695244-X
Y- -X Connector Type
Y- -X Connector Type
Y- -X Connector Type
Y- -X Connector Type
00000-
00001-
11111-
11112-
-1
-2
-3
-4
-5
SC/PC
SC/PC
SC/PC
SC/PC
SC/PC
to
to
to
to
to
SC/PC
ST/PC
LC/PC
FC/PC
MT-RJ
-6
-7
-8
-9
-0
ST/PC
ST/PC
ST/PC
ST/PC
ST/PC
to
to
to
to
to
SC/PC
ST/PC
LC/PC
FC/PC
MT-RJ
-1
-2
-3
-4
-5
LC/PC
LC/PC
LC/PC
LC/PC
LC/PC
to
to
to
to
to
SC/PC
ST/PC
LC/PC
FC/PC
MT-RJ
-6
-7
-8
-9
-0
FC/PC
FC/PC
FC/PC
FC/PC
FC/PC
to
to
to
to
to
SC/PC
ST/PC
LC/PC
FC/PC
MT-RJ
Explanation: Connector 1 – to test equipment
Connector 2 – under test
Cleaning Kits for Connector End Faces and MT-RJ Jacks
Product Facts:
●
●
●
●
●
112
Cleaning pads
Compressed air bottle
Cue tips
For all connector types
For MT-RJ Jacks
http://www.ampnetconnect.com/EMEA
Description
Part Number
Cleaning Kit
0-1374178-1
Management
Product Facts
●
●
●
Panels mount to the front of 19 racks and provide for the orderly
dressing and routing of cable assemblies
Various ring lengths available
1 U high
Description
Color
Height
Ring length
Part Number
5 rings
black (RAL 9005)
1U
95 mm
0-0558329-1
4 rings
light grey (RAL 7035)
1U
60 mm
9-0101019-0
4 rings
light grey (RAL 7035)
1U
80 mm
9-0101019-1
4 rings
white (RAL 9010)
1U
60 mm
9-0101019-2
4 rings
white (RAL 9010)
1U
80 mm
9-0101019-3
4 rings
black (RAL 9005)
1U
60 mm
9-0101019-5
610XC + 110XC CrossConnect Rack Mount Panel 19
Product Facts:
●
●
19 Rack Mount Panel for XC cable management
2 U high
-X
Color
-1
-2
Ivory
Black
Description
Part Number
XC Cable Management Panel
0-0406641-X
610XC + 110XC CrossConnect Cable Management Troughs
Product Facts:
●
●
Provide horizontal management and organization of cables
Troughs are available with or without legs
-X
Color
-1
-3
Ivory
Black
Description
Part Number
with legs
0-0569389-X
without legs
0-0569597-X
Tools, Baluns, Miscellaneous
1U Cable Management Panels 19
610XC + 110XC CrossConnect Vertical Cable Management Frame
Product Facts:
●
●
●
Provides high capacity storage of patch cables and jumper wire
Quick and easy installation
Available in 300 and 900 pair sizes
-X
-1
-3
Color
Ivory
Black
Description
Part Number
300 pairs
0-0569851-X
900 pairs
0-0569852-X
Cable Management Rings
Product Facts:
●
●
●
Provide vertical management and organization of cables
Available in two widths
Suitable for mounting directly to a plywood backboard
Description
Part Number
145 mm width
0-0569431-1
216 mm width
0-0569599-1
http://www.ampnetconnect.com/EMEA
113
Management
Tools, Baluns, Miscellaneous
Horizontal Finger Duct Panels
Product Facts:
●
●
●
Cable management accessories for EIA standard 19 equipment racks
Suitable for high performance twisted pair and optical fibre distribution
cables and patch cords
Available in various heigths and depths
Panel height
Front (H x D)
Rear (H x D)
Part Number
1 U single sided
38 x 51 mm
–
0-1375161-1
1 U single sided
38 x 76 mm
–
0-1375162-1
2 U single sided
76 x 76 mm
–
0-1375163-1
1 U double sided
38 x 51 mm
26 x 102 mm
0-1375160-1
1 U double sided
38 x 76 mm
26 x 102 mm
0-1375159-1
2 U double sided
76 x 76 mm
51 x 102 mm
0-1375158-1
Vertical Finger Duct Panels
Product Facts:
●
●
●
Cable management accessories for EIA standard 19 equipment racks
Suitable for high performance twisted pair and optical fibre distribution
cables and patch cords
Available in various heigths and depths
Panel height
Front (W x D)
Rear (W x D)
Part Number
Side Mount
89 cm single sided
102 x 127 mm
–
0-1375165-1
198 cm single sided
102 x 127 mm
–
0-1375258-1
89 cm double sided
102 x 127 mm
102 x 127 mm
0-1375164-1
198 cm double sided
102 x 127 mm
102 x 127 mm
0-1375257-1
Center Mount (mounting flanges on both sides to straddle two racks)
89 cm single sided
102 x 127 mm
–
0-1375167-1
198 cm single sided
102 x 127 mm
–
0-1375260-1
89 cm double sided
102 x 127 mm
102 x 127 mm
0-1375166-1
198 cm double sided
102 x 127 mm
102 x 127 mm
0-1375259-1
Hi-D Connect 6 U Vertical Managers
Product Facts:
●
●
●
6 U vertical manager
Patent pending bend controls
Allows ease of installation and full scalability
Description
Part Number
Hi-D 6 U Vertical Manager (1 set of 2)
1-1671078-1
Hi-D Connect 2 U Pass Through Duct
Product Facts:
●
●
●
114
http://www.ampnetconnect.com/EMEA
2 U pass through duct
Allows left to right side patching as well as front to back patching and
intra-cabinet patching
Hinged access cover ensures accessibility of installed patch cords
Description
Part Number
Hi-D 2 U Pass Through Duct
1-1671080-1
Administration/Labeling
Product Facts:
●
●
Icons for port identification applicable to various faceplates
of 110Connect and AMP CO series
Different colors and different symbols available
Y- -X Color
Description
Part Number
4x data, 4x neutral, 2x phone, 3x Cat.5 , 1x fax, 1x modem, 1x printer
Y-0558176-X
4x neutral, 2x Cat. 5E, 2x Cat. 6 and 1x V1, V2, V3, V4, D1, D2, D3, D4
Y-1375092-X
16x data
Y-0558198-X
16x phone
Y-0558199-X
16x neutral, available in -1, -6, -8 and 1- -0
Y-0558821-X
0000000001-
-1
-2
-3
-4
-5
-6
-7
-8
-9
-0
Almond
Red
Green
Blue
Yellow
Black
Orange
White
Violet
Grey
Labels for AMP CO Dual Inserts
Product Facts:
●
●
●
Labels for additional port marking in different colors
For dual AMP CO inserts
Available in six colors
Description
Part Number
90 labels per sheet (45 left and 45 right)
2-0101021-X
-X
Color
-0
-1
-2
-3
-4
-5
Grey
Red
Green
Blue
Yellow
Black
Tools, Baluns, Miscellaneous
Icons
Printer Labels
Product Facts:
●
●
Self-adhesive A4 sheets with printer labels for port labeling
Uses standard Excel sheet
Description
Packaging
Part Number
Labels (6 x 32 mm, 170 pcs per sheet)
10 sheets
0-0969704-1
http://www.ampnetconnect.com/EMEA
115
Administration/Labeling
Tools, Baluns, Miscellaneous
Labeling-Software
Product Facts:
●
●
AMP NETCONNECT
Labeling Software
●
●
●
Loading Instructions
Insert the CD into your CD
●
drive. Once inserted, the
CD will autorun. Follow the
●
●
●
●
●
Description
Part Number
Labeling Software
0-1479001-1
●
Compatible with Windows 95, 98, 2000 and NT
Flexible build option to produce more complex
alphanumeric identifiers
Create identifiers consisting of up to 12 independent segments
Can cope easily with the new TIA/EIA-606-A
standard identification sequences
Insert symbols (all standard Windows symbols
can be used)
Save and edit builds
Fine tune adjustment
Split your label format as required
Job notepad facility for builds saved to file
Adjust font style and size
Context-sensitive help
Download free 30-day-demo version under:
http://www.ampnetconnect.com/
labeling/labeling.asp
Labels for Work Area/Standard Labels for Outlet
Product Facts:
●
●
●
●
●
Description
Labels are designed to fit AMP NETCONNECT
and similar faceplates and surface outlets
Card stock labels are perforated and compatible
with inkjet and laser printers
Self-adhesive polyester labels are pre-cut and
compatible with laser printers
Labels are supplied on 8.5 x 11
(21,6 x 27,9 cm) sheets
For use with 110Connect style and
AMP CO outlets
Label Size (w x h)
Labels per Sheet
Standard Package
Part Number
Card stock
1.98 x 0.373 (5,0 x 1,0 cm)
72
5 Blatt (360 Aufkleber)
0-1375356-1
Self-adhesive Polyester
1.98 x 0.373 (5,0 x 1,0 cm)
72
5 Blatt (360 Aufkleber)
0-1375357-1
Label Covers for Outlets
Product Facts:
●
●
●
116
Description
Part Number
Label Covers for Outlets
0-1375345-1
http://www.ampnetconnect.com/EMEA
Kit includes fifty die-cut labels and
clear plastic covers
For use in US american outlets only
(see page 96 ff.)
Included with compatible faceplate kits
Administration/Labeling
Product Facts:
●
●
●
AMP NETCONNECT Labeling Software allows customization
of the universal labels listed for use with multiple products
The Software provides cut lines to modify the labels for each
particular application
Number of labels per package will vary according to individual
application
Description
Labels per Sheet
Standard Package
Part Number
Self-adhesive labels for Modular Jack Box, 1-Port
216
5 sheets (1080 labels)
0-1375358-1
Self-adhesive labels for Modular Jack Box, 2-Port
120
5 sheets (600 labels)
0-1375358-1
Self-adhesive labels for SL Series Office Box, 2-Port
120
5 sheets (600 labels)
0-1375358-1
72
5 sheets (360 labels)
0-1375358-1
144
5 sheets (720 labels)
0-1375353-1
Self-adhesive labels for SL Series Office Box, 4-Port
Self-adhesive labels for 110Connect Office Box, 2-Port and 4-Port
Patch Panel Labels
Product Facts:
●
●
●
●
●
●
Labels are designed to fit AMP NETCONNECT
and similar patch panels
Card stock labels are perforated and compatible
with inkjet and laser printers
Self-adhesive polyester labels are pre-cut and
compatible with laser printers
Labels are supplied on 8.5 x 11 (21,6 x 27,9 cm) sheets
Special 0.25 (6,4 mm) high label is provided for use
when icons are also desired
For use with 110Connect and SL style panels
Description
Label Size (w x h)
Labels per Sheet
Standard Package
Part Number
Card Stock
3.10 x 0.50 (7,9 x 1,3 cm)
36
5 sheets (180 labels)
0-1375351-1
Self-adhesive Polyester
3.10 x 0.50 (7,9 x 1,3 cm)
36
5 sheets (180 labels)
0-1375352-1
Self-adhesive Polyester
3.30 x 0.25 (8,4 x 0,6 cm)
72
5 sheets (360 labels)
0-1375353-1
Tools, Baluns, Miscellaneous
Universal Labels
Label Covers for Patch Panels
Product Facts:
●
●
Includes twenty-five sheets, four clear plastic label covers per sheet
For use in 110Connect and SL series patch panels
Description
Part Number
Label covers for patchpanel
0-1116044-2
http://www.ampnetconnect.com/EMEA
117
Administration/Labeling
Tools, Baluns, Miscellaneous
610XC + 110XC CrossConnect Labels
Product Facts:
●
●
●
●
Labels are designed to fit the AMP NETCONNECT 110XC
CrossConnect System and other similar products
Card stock labels: designed to fit into standard clear
designation strips, available in TIA/EIA-606-A compliant colors,
perforated, and compatible with inkjet and laser printers
White self-adhesive polyester labels: designed for easy
application to the front of the clear designation strips,
pre-cut and compatible with laser printers
Labels are supplied on 8.5 x 11 (21,6 x 27,9 cm) sheets
Description
Label Size (w x h)
Labels per Sheet
Standard Package
Part Number
Card Stock
7.90 x 0.48 (20 x 1,2 cm)
18
5 sheets (90 labels)
0-1375354-X
Self-adhesive Polyester
7.90 x 0.48 (20 x 1,2 cm)
18
5 sheets (90 labels)
0-1375355-1
-X
Color
-1
-2
-3
-4
-5
-6
-7
-8
-9
White
Blue
Green
Purple
Red
Brown
Yellow
Orange
Grey
Label Cover for 610XC + 110XC Wiring Blocks
Product Facts:
●
Used with 610XC + 110XC CrossConnect system
Description
Part Number
Clear Plastic Label Holder
0-0558417-1
Labels for Cable and Cable-Assemblies
Product Facts:
●
●
118
Labels are designed for use on
cable and cable assemblies
Labels are pre-cut and compatible
with laser printers
Description
Label size (w x h)
Labels per Sheet
Standard Package
Part Number
4-Pair Cable
0.984 x 1.496 (2,5 x 3,8 cm)
48
5 sheets (240 labels)
0-1479002-1
Self-adhesive Polyester 25-Pair Cable
0.984 x 2.480 (2,5 x 6,3 cm)
24
5 sheets (120 labels)
0-1479003-1
http://www.ampnetconnect.com/EMEA
Index
● Complete listing of product names and categories
● Complete breakdown of all partnumbers contained within
the catalog
● XG 10 Gb/s approved:
Ensures the high-speed service 10 Gigabit Ethernet
over copper (IEEE 802.3an) as well as over fibre
(IEEE 802.3ae)
7.
Index
● Pyramid Tested:
The logo for quality and performance of
real Category 6 components
● Optimized Physical Contact:
Controlled ferrule end faces guarantee
highest data transmission quality
● Imprint,
Addresses of country Headquarters,
Trademarks
Glossary
120
Part Number Index
122
Reliable Performance
127
Imprint
128
Glossary
Index
Subject
Page
Subject
Page
Page
123...
Class E
34
FLF
10 Gigabit Ethernet 28, 31, 33, 34,
Class F
33
Floor Box
43, 78, 95
41, 43, 45, 46,
Cleaver
105–109
Flushmount
12, 32, 45
50–56, 60, 68, 69,
76, 79–84, 127
110Connect
Clip
70, 71
Compact Switch
89
11, 12, 20–22, 26,
Consolidation Point
32, 41, 48, 96, 97,
Corelink
75, 107
99, 103, 116, 117
Coupler
21, 41, 97, 100
110XC
18, 19, 24, 113, 118
610XC
16, 17, 25, 113, 118
26, 48
Coupling Bushings
57, 58, 63,
A
16–19, 25,
86
AMP CO Plus
113, 118
Cyclops
– Edge Connector
104
43
33–40
D
– Installation Kit
42–44
Dado Trunking
s. Trunking
– Labels
115
De-Embedded
s. Pyramid Tested
– Outlets
s. Installation Kit
30
– Tools
Adapters
Designer Frame Series
42, 45, 94
DIN (Deutsche Industrie Norm)
103, 104
22, 42, 45, 78, 94, 95
Double Gang
96–98
10, 13, 14, 31, 32
Duplex Cable
8, 28, 29, 51
AMP-TWIST-6S
32, 41, 45
ANT
62, 63, 67
ATM
33, 34
E
EDIZIOdue
44, 99
Ensured Performance
68, 76,
B
112, 127
Backbone Cable
9
Back Box
s. Surface Box
F-Series Plug
33
FT
38
G
Gigabit Ethernet
50, 87, 88, 91
H
Hi-D Connect
EPO-TEK
Epoxy
111
105, 106, 110, 111
21, 26, 41, 48, 97
ISDN
33–36, 38
L
Labeling Software
116
Launch lead
112
LC
– for SC
70
Lead
70, 77, 104
– for ST-Style
70
LightCrimp
Category 7
28, 33, 46, 47
8, 21, 26, 29,
41, 48, 97
107, 109, 112
s. Patch Cord
77, 105–107, 111
LightCrimp Plus
76, 105–107
Loose Tube Cable
53–56
LSA+
12–14, 31, 45, 103
LSZH
8, 9, 23, 24, 26,
42, 43, 45, 78,
28, 29, 46–48,
94, 95, 97, 116
51–55, 79, 83, 84
Fiber-to-the-Desk (FttD)
52, 76, 78
CATV
33
FibrBoss
67
M
Class D
35
FIST
67
Mandrel
http://www.ampnetconnect.com/EMEA
57, 58, 60, 62,
71, 74, 79–83,
22, 98
31, 78, 113, 114
8, 21, 26,
IP67
46, 47, 69,
Faceplate Frame
103
29, 41, 48, 97
71
Cable Management 10–12, 16–19,
43
Industrial Ethernet
– for LC
F
115
Impact Tool
20, 23, 24,
C
40, 43, 102
Icons
Bend Limiting Boot
EtherSeal
111
IBM
Epoxy Connector
BS (British Standard)
s. System Cable
I
33, 40, 102
40, 102
13, 32, 114
Horizontal Cable
Balun
BNC
8, 29, 33–35,
ICS
s. Coupling Bushings
AMPTRAC
51–56
Hysol
– Inserts
– Patch Panels
FO Cable
104–108
CrossConnect XC
Access Point
44, 99
72–74, 78, 84, 112
Crimp Tool
120
Subject
112
Glossary
Media Converter
Microscope
Page
Subject
87, 88
PG Gland
106, 108, 109
50, 83
PiMF
Modular Jack Panels
12, 13,
Pistol Grip
Mosaic
22, 43, 45, 78, 100
Mounting Aid
95
MPO System
60, 84, 109
MRJ-21
14, 15
MT-RJ System
57–59, 62, 97
Pigtail
Mode Conditioning
32, 59, 63
Page
58, 80
28, 42–44, 46
87, 88, 90, 91
– Coupling Bushings
74
– Jacks
– Outlets
Tools
104, 108
103
– Crimp Tool
104–108
Pliers
104–108
– for Corelink
75, 107
Polishing Accessories
110, 111
– for Epoxy
Power Multiplexing
36
Power-over-Ethernet (PoE)
Prisamobile
36, 86
99
104, 105, 107, 108
108, 110, 111
– for LightCrimp Plus
105, 106
– for MT-RJ
105, 107–109
– Impact Tool
103
– Palm Tool
103
111
PVC
8, 9, 23–25, 29
TRA-CON
Pyramid Tested
10, 11, 20, 22,
Trunking
42, 44, 45, 78, 95, 99
TT83
78
41, 45, 127
Twinax
102
54–56
Type 1
43, 102
– Patch Panel
57, 59–61, 63
– Pigtail
80
– Testing
112
Rodent Resistant
S
64–66
SC
57, 58, 60–63, 66, 70,
72–82, 107, 112
Self-adhesive Labels
Single Gang
N
38
U
105, 107–109
115–118
11, 20, 21, 26,
103
UL
16–21, 24, 25, 41
Universal Outlets
78, 94–100
Uplink Module
90, 91
96–98
SL Series
Non-Impact Tool
20, 21, 41
31, 34, 37,
81, 83, 84
– Wall Mount Enclosure
Toolless Jack
68, 69
– Patch Cable
– Tools
Page
– Cable Stripper
Pro-Crimper II
– Active Ports
Subject
Index
Subject
32, 41, 48, 63, 94, 96,
V
Voice over IP (VoIP)
36
97, 99, 100, 103, 117
O
Slim Line
Office Distribution Cable
52
s. SL Series
Smart Switch
90
W
Wall Mount Enclosure
OM1
50–56
SMOUV
62, 63, 67
OM2
50–56
Snap-In Module
15, 60–62
OM3
50–56
SNMP
86, 88, 91
X
Splice Tray
58, 63, 67
XC CrossConnect
Optimized Physical Contact (OPC)
68, 76, 112, 127
OS1
50–56
Stackable Switch
ST-Style
112
Outlet
22, 42–45,
Sub-D
78, 94–100
Surface Box
Oven
108, 110
92
57, 58, 61–63, 66,
OTDR
Wireless LAN
Palm Tool
PASST!
86
s. CrossConnect XC
XG System
28, 31, 33, 34,
70, 72, 76–84, 107, 112
41, 43, 45, 46, 50–56,
37
60, 68, 69, 76, 79–84, 127
System Cable
95, 97, 99, 100
8, 28, 29, 51, 52
Z
ZipTwin
P
64–67
51
T
103
42, 45, 94
Patch Cord
23–26, 46–48, 79–83
Patch Panel
10–14, 18,
30–32, 57–63
TAE
Telephone
38
9, 12, 21,
36–38, 104, 115
TERA
Token Ring
33, 47
34, 35, 40, 102
http://www.ampnetconnect.com/EMEA
121
Part Number Index
Index
Part Number
122
Page
Part Number
Page
Part Number
Page
Part Number
Page
0057533
9
0219888
23
0349561
82
0502129
110
0057534
9
0219890
23
0349565
82
0502134
110
0057535
8
0228433
111
0349567
82
0502222
110
0057537
9
0231666
104
0349568
80
0502259
110
0057538
8
0233266
80
0349569
80
0502282
111
0057888
9
0233582
80
0349574
82
0502306
111
0057893
28
0284232
22
0349578
82
0502418
111
0058424
107
0284265
45
0349580
82
0502580
70
0058433
107
0284584
35
0349582
80
0502631
110
0058532
107
0288004
98
0349584
80
0502632
73
0101003
38
0288072
98
0406330
12
0502656
110
0101004
99
0336455
43
0406331
12
0502748
111
0101006
99
0336480
33
0406332
12
0502750
72
0101011
38
0336488
46
0406372
21
0502776
73
0101013
62
0336525
13, 32
0406373
21
0502780
72
0101016
99
0336526
13, 32
0406375
21
0502964
109
0101019
99, 113
0336539
45
0406390
12
0502965
109
0101021
44, 115
0336547
104
0406641
113
0502968
109
0101022
30
0336548
34
0442112
98
0502969
109
0101023
57, 58
0336549
34
0442114
98
0502970
109
0106901
73
0336553
34
0492025
107
0502977
109
0136816
29
0336554
34
0492026
107
0503137
72
0144268
38
0336556
33
0492109
108
0503304
110
0183482
38
0336608
94
0492322
106
0503330
106
0183553
37
0336613
94
0492414
109
0503337
110
0183635
35
0336614
94
0492426
109
0503577
75
0183636
35
0336627
42
0492543
106
0503605
75, 107
0183641
35
0336631
22
0492622
107
0503613
70
0183723
38
0336633
22
0492623
107
0503676
70
0183725
38
0336647
12
0492642
76
0503677
70
0183733
40
0336653
11
0492643
76
0503681
75
0183736
38
0336671
31
0492674
107
0503692
77
0183931
78
0336675
45
0492697
105
0503693
77
0219241
24
0336684
33
0492703
106
0503705
106
0219242
24
0336695
11
0492749
109
0503706
106
0219243
24
0336707
63
0492782
107
0503746
108
0219244
24
0336709
63
0492783
107
0503787
110
0219246
24
0336711
63
0501014
108
0503901
75
0219413
29
0336714
63
0501195
111
0503902
77
0219420
29
0336720
63
0501197
110
0503910
107
0219484
29
0336721
63
0501258
108
0503911
107
0219584
8
0336793
100
0501381
72
0503924
107
0219585
8
0346370
98
0501473
111
0503948
70
0219885
23
0346715
98
0501523
110
0503957
106
0219886
23
0346856
98
0501818
110
0504000
77
0219887
23
0346925
47
0501858
110
0504021
72
http://www.ampnetconnect.com/EMEA
Part Number Index
Page
Part Number
Page
Part Number
Page
Part Number
Page
77
0558401
18
0569597
113
0599611
53
0504035
111
0558402
18
0569599
113
0599612
55
0504064
109
0558417
118
0569669
25
0599613
55
0504290
109
0558421
102
0569685
25
0599614
54
0504600
77
0558635
18
0569851
113
0599615
54
0504614
73
0558637
18
0569852
113
0599616
54
0504618
109
0558639
18
0569853
19
0599617
54
0504640
73
0558821
115
0569854
19
0599618
54
0504646
70
0558839
18
0569855
19
0599619
54
0504655
70
0558840
18
0569856
19
0599620
54
0504657
70
0558841
18
0569857
19
0599621
54
0504663
72
0558842
18
0569858
19
0599622
54
0555049
21
0558843
18
0569949
103
0599623
54
0555050
21
0558912
40
0599142
51
0599624
54
0555051
21
0559066
75
0599144
52
0599625
54
0555052
21
0559087
75
0599145
52
0599626
54
0555058
102
0559496
64, 65, 66
0599146
52
0599627
54
0555242
102
0559501
64, 65, 66
0599148
52
0599628
54
0555249
102
0559515
61
0599149
52
0599629
54
0555330
102
0559516
61
0599151
52
0599681
56
0555414
102
0559523
62
0599152
53
0599682
56
0555602
38
0559542
59
0599153
53
0599683
56
0555611
38
0559557
61
0599154
53
0599690
56
0555614
38
0559558
61
0599156
53
0599692
56
0555622
38
0559560
64
0599157
53
0726948
104
0555634
40
0559561
65
0599159
53
0790178
103
0555644
37
0559575
62
0599160
53
0790183
103
0555648
38
0559596
61
0599161
53
0790187
103
0555664
40
0559601
62
0599162
53
0941761
24
0555672
38
0569389
113
0599164
53
0953597
100
0555675
40
0569431
113
0599165
53
0959236
47
0555680
38
0569432
19
0599167
53
0959237
47
0555681
38
0569433
19
0599168
55
0959238
47
0555694
40
0569434
19
0599169
55
0959239
47
0556609
43
0569438
19
0599170
55
0959240
47
0556904
102
0569439
19
0599172
55
0959305
47
0557245
40
0569440
19
0599173
55
0959306
47
0557264
38
0569444
19
0599175
55
0959307
47
0557505
96
0569445
19
0599192
51
0959308
47
0557674
102
0569446
19
0599602
52
0959309
47
0558176
115
0569523
25
0599603
52
0959385
46
0558198
115
0569524
25
0599605
53
0964361
95
0558199
115
0569525
25
0599606
53
0964719
95
0558251
97
0569526
25
0599607
53
0964830
95
0558329
113
0569527
25
0599609
53
0966105
22
0558400
18
0569528
25
0599610
53
0966106
22
http://www.ampnetconnect.com/EMEA
Index
Part Number
0504034
123
Part Number Index
Index
Part Number Page
124
Part Number Page
Part Number Page
Part Number Page
0966223
94
1206617
81
1278892
81
1375164
114
0966224
94
1206619
81
1278893
81
1375165
114
0966474
78
1206620
81
1278894
81
1375166
114
0966498
95
1206621
81
1278895
81
1375167
114
0966740
95
1206623
81
1278896
81
1375187
20
0966936
78, 94
1206704
57
1278897
81
1375188
41
0969614
58
1206820
83
1278898
81
1375189
41
0969615
58
1206821
83
1278899
81
1375190
20
0969616
58
1278009
76
1278900
81
1375191
20
0969617
58
1278022
105
1278901
81
1375192
20
0969618
58
1278023
106
1278947
108
1375193
20
0969619
58
1278079
76
1278949
105
1375257
114
0969628
58
1278080
76
1278997
109
1375258
114
0969629
58
1278082
76
1339015
41
1375259
114
0969630
58
1278118
105
1339042
22
1375260
114
0969631
58
1278132
109
1339044
22
1375308
103
0969704
115
1278219
107
1339054
96
1375309
103
0969732
78
1278303
69
1339057
96
1375310
103
0969733
78
1278323
64
1339188
20
1375317
104
0969986
62
1278328
61
1339189
20
1375345
116
0969987
62
1278346
105
1348260
82
1375351
117
0969993
58
1278368
62
1348269
83
1375352
117
0969994
58
1278414
68
1348271
83
1375353
117
0969999
78
1278415
68
1348876
59
1375354
118
1116044
117
1278471
109
1348941
80
1375355
118
1116412
97
1278531
108
1348942
80
1375356
116
1116515
41
1278567
61
1348960
57
1375357
116
1116571
104
1278755
66
1374178
112
1375358
117
1116603
20
1278807
69
1374208
69
1379156
43
1116604
20
1278808
69
1374416
68, 80
1379179
43
1116697
96
1278810
68
1374463
62
1391366
80
1116698
96
1278811
68
1374526
66
1391914
60
1116746
40
1278873
81
1374598
84
1391920
60
1200502
74
1278874
81
1374906
74
1391922
60
1206114
57
1278875
81
1375013
10
1391924
60
1206138
57
1278876
81
1375014
10
1391926
60
1206144
62
1278877
81
1375015
10
1391928
60
1206145
62
1278878
81
1375016
10
1391930
60
1206146
62
1278879
81
1375055
20
1391931
60
1206158
82
1278880
81
1375092
115
1391932
60
1206343
57
1278881
81
1375158
114
1391934
60
1206480
57
1278882
81
1375159
114
1391936
60
1206505
57
1278883
81
1375160
114
1391938
60
1206613
81
1278884
81
1375161
114
1391940
60
1206615
81
1278890
81
1375162
114
1391942
60
1206616
81
1278891
81
1375163
114
1391953
84
http://www.ampnetconnect.com/EMEA
Part Number Index
Part Number Page
Part Number Page
Part Number Page
84
1418800
62
1479565
21
1536447
83
1391956
84
1435128
65
1479566
41
1536462
81
1391957
84
1435129
66
1479591
21, 41
1536463
81
1391958
84
1435130
66
1479592
26, 48
1536464
82
1391975
84
1435965
14
1479593
97
1536501
83
1391976
84
1435971
14
1479594
97
1536502
83
1391977
84
1457567
74
1479595
97
1536503
83
1391978
84
1479001
116
1479596
97
1536508
82
1391979
84
1479002
118
1479599
21
1536509
82
1391980
84
1479003
118
1479600
41
1536510
82
1391981
84
1479153
11
1479601
26
1536511
81
1391982
84
1479154
11
1479602
26
1536512
81
1391983
84
1479155
11
1479603
48
1536513
81
1391984
84
1479156
11
1479604
48
1536555
80
1391985
84
1479245
16
1479622
16
1536556
80
1391986
84
1479246
16
1479623
16
1536561
80
1391987
84
1479247
16
1479624
16
1536663
57
1391988
84
1479248
16
1479654
97
1536769
83
1391991
84
1479249
16
1479655
97
1536770
83
1394060
12
1479250
16
1479656
97
1536879
80
1394294
95
1479251
16
1479657
97
1536880
80
1394573
30
1479252
17
1479658
97
1536966
80
1394574
30
1479253
17
1479659
97
1536967
82
1394575
30
1479254
17
1479717
41
1536968
81
1394576
30
1479255
17
1499001
23
1536969
83
1394581
42
1479256
17
1499101
28
1536974
80
1394582
42
1479257
17
1499102
28
1536975
80
1394583
43
1479258
17
1499413
25
1583236
103
1394763
43
1479259
17
1499414
25
1583608
103
1418720
58
1479260
17
1499447
8
1588172
84
1418721
58
1479261
17
1499448
8
1588175
107
1418722
58
1479265
25
1499449
29
1588291
76
1418723
58
1479266
25
1499450
29
1588292
76
1418724
58
1479267
25
1499515
15
1588705
71
1418725
58
1479451
14
1499516
15
1588707
71
1418726
58
1479452
14
1499520
15
1588709
71
1418727
58
1479459
14
1499521
15
1588711
71
1418728
58
1479488
96
1499600
10
1588878
69
1418729
58
1479489
96
1499601
10
1588879
69
1418730
58
1479490
96
1499602
11
1588880
69
1418731
58
1479494
96
1499603
11
1591019
90
1418732
58
1479552
41
1534332
78
1591020
87
1418733
58
1479561
21
1534780
78
1591022
87
1418734
58
1479562
41
1536444
83
1591024
87
1418735
58
1479563
21
1536445
83
1591026
87
1418770
62
1479564
41
1536446
83
1591028
87
http://www.ampnetconnect.com/EMEA
Index
Part Number Page
1391954
125
Part Number Index
Index
Part Number Page
126
Part Number Page
Part Number Page
Part Number Page
1591029
87
1591522
88
1711005
28
1711277
100
1591030
87
1591700
86
1711007
28
1711278
13, 32
1591031
87
1591710
86
1711008
28
1711282
99
1591032
87
1644016
38
1711027
26
1711283
99
1591034
87
1644042
31
1711028
24
1711284
11
1591036
89
1644070
45
1711029
48
1711301
98
1591038
90
1644076
24
1711034
24
1711302
98
1591040
90
1644077
47
1711035
24
1711303
104
1591042
90
1644097
44
1711037
24
1711307
100
1591044
90
1671000
57
1711038
24
1711336
33
1591047
90
1671002
57
1711040
26
1711342
41
1591056
90
1671003
57
1711043
8
1711348
98
1591058
91
1671017
57
1711053
8
1711349
100
1591060
91
1671044
63
1711076
46
1725080
103
1591062
91
1671054
62
1711077
46
1725150
103
1591068
92
1671078
114
1711078
46
1754136
107
1591070
89
1671079
13, 32
1711079
46
1754138
106
1591072
89
1671080
114
1711080
46
1754482
76
1591074
91
1671082
59
1711082
99
1754483
76
1591076
91
1673956
103
1711083
99
1754484
76
1591078
91
1693276
76
1711088
45
1754485
76
1591080
91
1693278
76
1711091
23
1754845
105
1591082
91
1693949
69
1711093
23
1754846
105
1591084
91
1693951
69
1711094
23
1754847
105
1591086
91
1695133
60
1711095
23
1777029
14
1591088
91
1695135
84
1711096
23
1777041
14
1591090
89
1695195
84
1711097
23
1777042
14
1591093
90
1695240
112
1711100
37
1777052
14
1591094
90, 92
1695241
112
1711125
36
1777053
14
1591095
90, 92
1695242
112
1711130
36
1591096
90, 92
1695243
112
1711135
36
032054-000
67
1591097
90, 92
1695244
112
1711140
36
124962-000
67
1591098
90, 92
1695245
112
1711147
10
182398-000
62
1591099
92
1695355
60
1711148
10, 13, 31, 32
321442-000
67
1591184
86
1695359
84
1711160
41
377602-000
67
1591185
86
1695459
84
1711161
45
406222-000
67
1591187
86
1695460
84
1711162
45
449526-000
103
1591500
88
1695461
84
1711163
28
536788-000
67
1591504
88
1695464
84
1711168
99
657054-000
62
1591506
88
1695469
84
1711169
99
861528-000
67
1591510
88
1695470
84
1711170
99
887646-000
67
1591512
88
1695471
84
1711177
46
909090-000
67
1591514
88
1711000
38
1711187
44
D24193-000
67
1591516
88
1711001
38
1711188
34
D81297-000
63
1591518
88
1711003
28
1711255
95
E41188-000
30
1591520
88
1711004
28
1711276
100
E96145-000
63
http://www.ampnetconnect.com/EMEA
Reliable Performance
Index
XG 10 Gb/s Approved
High Speed 10 Gigabit Ethernet over Twisted Pair and
Fiber Optic Cabling
The XG 10 GB/S APPROVED logo marks all products of the XG family.
No matter whether copper or fibre – AMP NETCONNECT offers a
complete end-to-end system for all cabling media.
The new XG Copper System complies already today to the upcoming
10 Gb/s standard IEEE 802.3an, which is expected to be released in
summer 2006. The system’s outstanding AlienNEXT suppression was
tested and certified by the independant DELTA labs in Denmark.
This guarantees 10GBase-T performance over 100 m link length.
The acknowledged XG Fibre System has proven its performance and reliability
in the market for several years. The system was now extended by a
LC connector for quick termination.
Pyramid Tested
The Conformity and Quality Trademark
for Real Cat. 6 Component Performance
All products in this catalog that feature the PYRAMID TESTED logo
totally comply with the de-embedded testing requirements of
the standards TIA / EIA 568 B.2-1 (UTP & STP), IEC 60603-7-4 (UTP)
and IEC 60603-7-5 (STP). Accordingly these products fulfill the performance requirements of Cat. 6 for components which guarantees
interoperability and backward-compatibility between products.
During development and production these products are tested with a
worldwide standardized test setup, heart piece of which is a pyramidal
test head. This exactly defined shape guarantees repeatability of the
results. Most significant advantage for end-users is a wide range of
system- and vendor-independent patch cords suitable to reach Cat. 6.
Ensured Performance
Optimized Physical Contact (OPC) enhances your link parameters –
for high speed and high quality
Why do you require a controlled ferrule end face? Enhanced services such as Gigabit and
10 Gigabit Ethernet require a high quality cabling system. Therefore, IEC 60874-19-1 specifies
the dimensional details of SC connectors in order to ensure intermatability and performance
within an ISO 11801 specified application. These dimensional requirements are directly related
to the endface characteristics of a polished ferrule, namely its Radius, Dome Offset and
Fibre Position.
Also, the optical intermatability between connectors of different suppliers can be ensured
by controlled endfaces. As a result of OPC a stable physical contact between the endfaces
is achieved. This provides a very low Insertion Loss as well as a high Return Loss in order
to run high speed applications like Gigabit or 10 Gigabit Ethernet.
All Products in this catalog that feature the ENSURED PERFORMANCE logo provide OPC
at all time. AMP NETCONNECT guarantees a controlled endface for all OM3 assemblies and
field installable products (MT-RJ and LightCrimp Plus).
Photo: Seikoh Giken
If these ferrule characteristics are optimal an Optimized Physical Contact (OPC) between
the two connectors is guaranteed. This will enhance data transmission parameters like
Optical Performance, Attenuation, Return Loss and Data Link Stability.
http://www.ampnetconnect.com/EMEA
127
Index
Imprint
Tyco Electronics
AMP NETCONNECT
European Product Catalog
Premises Cabling
Revision: October 2005
The product portfolio shown in this catalog contains the most important AMP NETCONNECT cabling system components for
the European region. However, not every available product or product type can be displayed. In case of requests regarding
products not shown or for any other question please contact one of the following AMP NETCONNECT country head quarters:
Austria
Belgium
Czech Rep.
Tyco Electronics
Pilzgasse 33
1211 Wien
Phone: +43-1-90560-1204
Fax:
+43-1-90560-1270
Tyco Electronics
Diestsesteenweg 692
3010 Kessel-Lo
Phone: +32-16-352-300
Fax:
+32-16-352-353
Tyco Electronics
K AMP 1293
66434 Kurim
Phone: +420-5-41-162-112
Fax:
+420-5-41-162-223
Denmark
Finland
France
Tyco Electronics
Naverland 8
2600 Glostrup
Phone: +45-70-15-52-00
Fax:
+45-43-44-14-14
Tyco Electronics
Konalantie 47 F (PL100)
00390 Helsinki
Phone: +358-95-12-34-20
Fax:
+358-95-12-34-250
Tyco Electronics
Chaussée Jules César, 29
95301 Cergy Pontoise Cedex
Phone: +33-1-3420-2122
Fax:
+33-1-3420-2268
Germany
Hungary
Netherlands
Tyco Electronics
AMPèrestraße 7–11
63225 Langen
Phone: +49-6103-709-1547
Fax:
+49-6103-709-1219
Tyco Electronics
Grassalkovich ut. 255
1239 Budapest
Phone: +36-1-289-1007
Fax:
+36-1-289-1010
Tyco Electronics
Rietveldenweg 32
5222 AR ’s-Hertogenbosch
Phone: +31-73-6246-211
Fax:
+31-73-6246-958
Norway
Poland
Russia
Tyco Electronics
P.O.Box 74, Holmengata 24
1378 Nesbru
Phone: +47-66-77-88-99
Fax:
+47-66-77-88-55
Tyco Electronics
Ul. Postepu 2
02-676 Warszawa
Phone: +48-22-4576-700
Fax:
+48-22-4576-720
Tyco Electronics
Olympiysky Prospect 16, Office 4
129010 Moskva
Phone: +7-095-926-55-06
Fax:
+7-095-926-55-05
Spain
Sweden
Switzerland
Tyco Electronics
Muntaner, 249
08021 Barcelona
Phone: +34-93-291-0330
Fax:
+34-93-291-0608
Tyco Electronics
Box 619, Kanalvågen 10 c
19426 Upplands-Våsby
Phone: +46-8-5072-5000
Fax:
+46-8-5072-5001
Tyco Electronics
AMPèrestrasse 3
9323 Steinach
Phone: +41-71-447-0447
Fax:
+41-71-447-0423
Turkey
Unit. Kingdom
U.A.E.
Tyco Electronics
Yapi Kredi Plaza B/10
34330 Levent-Istanbul
Phone: +90-212-281-8181
Fax:
+90-212-281-8184
Tyco Electronics
Merrion Avenue
HA7 4 RS Stanmore/Middlesex
Phone: +44-208-420-8140
Fax:
+44-208-954-7467
Tyco AMP NETCONNECT
Sheikh Zayed Road
Dubai
Phone: +971 4 3391199
Fax:
+971 4 3393967
AMP, AMP CO, AMP NETCONNECT, AMPTRAC, AMP-TWIST, CORELINK, Dualan, Easistrip, EtherSeal, FIST, FibrBoss,
FSD, LightCrimp, MPO, MRJ-21, NETCONNECT, PRO-CRIMPER, RSD, SMOUV and TYCO are trademarks.
Other product or brand names as well as logos and company names mentioned in this catalog may be trademarks of their
respective owners.
128
http://www.ampnetconnect.com/EMEA
Wiring Diagrams for Modular Plugs and Jacks
T568A Wiring
T568B Wiring
Tip
Ring
Application Wiring Diagrams for Modular Jacks
10Base-T
● 100Base-TX
●
PAIR PAIR
12345678
1000Base-T
● 10GBase-T
●
Token Ring
● ISDN, xDSL
●
PAIR
PAIR
PAIR PAIR PAIR
PAIR
12345678
12345678
ATM/TP-PMD
● 1000Base-TX2
●
PAIR
PAIR
12345678
Tip
Ring
Note: All of the applications listed above (as well as most other communications applications) can be implemented on both
T568A and T568B jacks.
Tyco Electronics Austria
Pilzgasse 33
1211 Wien
Phone: +43-1-90560-1204
Fax:
+43-1-90560-1270
Tyco Electronics France
Chaussée Jules César, 29
95301 Cergy Pontoise Cedex
Phone: +33-1-3420-2122
Fax:
+33-1-3420-2268
Tyco Electronics Netherlands
Rietveldenweg 32
5222 AR ’s-Hertogenbosch
Phone: +31-73-6246-246
Fax:
+31-73-6246-958
Tyco Electronics Sweden
Box 619, Kanalvägen 10 c
19426 Upplands-Väsby
Phone: +46-8-5072-5000
Fax:
+46-8-5072-5001
Tyco Electronics Belgium
Diestsesteenweg 692
3010 Kessel-Lo
Phone: +32-16-352-300
Fax:
+32-16-352-353
Tyco Electronics Germany
AMPèrestraße 7–11
63225 Langen
Phone: +49-6103-709-1547
Fax:
+49-6103-709-1219
Tyco Electronics Norway
P.O.Box 74, Holmengata 24
1378 Nesbru
Phone: +47-66-77-88-99
Fax:
+47-66-77-88-55
Tyco Electronics Switzerland
AMPèrestrasse 3
9323 Steinach
Phone: +41-71-447-0447
Fax:
+41-71-447-0423
Tyco Electronics Czech Rep.
K AMP 1293
66434 Kurim
Phone: +420-5-41-162-112
Fax:
+420-5-41-162-223
Tyco Electronics Hungary
Grassalkovich ut. 255
1239 Budapest
Phone: +36-1-289-1007
Fax:
+36-1-289-1010
Tyco Electronics Poland
Ul. Postepu 2
02-676 Warschau
Phone: +48-22-4576-700
Fax:
+48-22-4576-720
Tyco Electronics Turkey
Yapi Kredi Plaza B/10
34330 Levent-Istanbul
Phone: +90-212-281-8181
Fax:
+90-212-281-8184
Tyco Electronics Denmark
Naverland 8
2600 Glostrup
Phone: +45-70-15-52-00
Fax:
+45-43-44-14-14
Tyco Electronics India
Survey#186/3, Hoody, KRPuram
560048 Bangalore
Phone: +91-80-28412433
Fax:
+91-80-28412155
Tyco Electronics Russia
Olympiysky Prospect 16, Office 4
129010 Moskau
Phone: +7-095-926-55-06
Fax:
+7-095-926-55-05
Tyco Electronics Ukraine
13, Pimonenko Str., 7A, Off. 11
04050 Kiev
Phone: +380-44-2062265
Fax:
+380-44-2062264
Tyco Electronics Finland
Konalantie 47 F (PL100)
00390 Helsinki
Phone: +358-95-12-34-20
Fax:
+358-95-12-34-250
Tyco Electronics Italy
C.so F.IIi Cervi, 15
10093 Collegno (Torino)
Phone: +39-011-4012-111
Fax:
+39-011-4012-268
Tyco Electronics Spain
Muntaner, 249
08021 Barcelona
Phone: +34-93-291-0330
Fax:
+34-93-291-0608
Tyco Electronics Unit. Kingdom
Merrion Avenue
HA7 4 RS Stanmore/Middlesex
Phone: +44-208-420-8140
Fax:
+44-208-954-7467
1308799–22M–ST–10/05
TYCO, AMP and NETCONNECT are trademarks.
Tyco AMP NETCONNECT U.A.E.
Sheikh Zayed Road
Dubai
Phone: +971 4 3391199
Fax:
+971 4 3393967
For Eastern European Countries
not shown please call
+49-6103-709-1166
For Middle East and African
Countries not shown
please call +33-1-3420-2122
© 2005 – Tyco Electronics AMP GmbH – All rights reserved
http://www.ampnetconnect.com/EMEA
European Product Catalog 2006
Tyco Electronics AMP NETCONNECT
AMP NETCONNECT in Europe, Middle East & Africa
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement