Magicshine Eagle M2 Bike Light User Manual

Magicshine Eagle M2 Bike Light User Manual
NA
MAGICSHINE:
EAGLE M2 BICYCLE LIGHT
USER MANUAL
NA
MAGICSHINE:
www.magicshine.com
CEL OX
RoHS = ZEN Designed & Manufactured by MAGICSHINE®
| USING THIS MANUAL
Thanks you for choosing MAGICSHINE! You have purchased one of the
most sophisticated and reliable bicycle lights on the market today. Used
properly, we are sure it will bring you long-time enjoyment. Please take time
to read this manual carefully before use and save it for future reference.
WARNINGS
TO REDUCE RISK OF FIRE OR INJURY TO PERSONS:
* Read and follow all safety and operation instructions. If you have any questions,
or do not understand an instruction, please contact your dealer or service
provider.
* Keep out of reach of children or pets.
* Do not short-circuit the charger or the battery.
* Do not use your device while charging or touch your device with wet hands.
* Do not drop or cause an impact to the charger or the battery.
* Do not charge the battery with chargers that are not approved by the
manufacturer.
* Never dispose of batteries or devices in a fire.
* Never place batteries or devices on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when overheated.
* Never crush or puncture the battery.
* Do not touch the light surface when the light is tumed on. The light surface
could be very hot.
* Battery must be stored in a dry area with low temperature for long-term storage.
* Do not touch the liquid if the battery is leaking. If contacted, get medical help
right away.
* Prevent batteries from contacting metal objects, as this can create a connection
between the + and — terminals of your device and lead to temporary or
permanent battery damage.
* Charge only with a MAGICSHINE specified charger.
* Do not watch directly in the LEDs, which can hurt your eyes.
WARRANTY
* We provide a basic limited warranty to the original owner of MAGICSHINE products.
1 year for light head. 180 days for battery, charger and other accessories. For any
Warranty, proof of the purchase is required.
* Any retumed products with loss or damage is totally at customers own risk. Please
use an insured or registered shipping method.
* Warranty does not cover any damage due to accident, abuse, or normal wear and
tear or any unauthorized disassembly, repair or modification.
* Please keep the warranty card properly.
BATTERY CONFIGURATION
MAGICSHINE designed 7.4V5.2AH battery pack for high quality and safe performance!
* 300 grams including the battery bag
e 4x18650Li-ion batteries .
* Certifications: CE, UL, TUV, PSE
* Includes a small protection circuit board with over-charge, over-discharge and short-
circuit protection function
SPECIFICATION
RUN TIME
| FEATURES
* Six ultra bright LEDs to produce 2400 actual lumens output
* Remote control for easy operation
* high / low beam design
* Enhanced ventilation system
* Unique Eagle eye design provides excellent side visibility enhancing your safety
* Intelligent thermal management to prevent damage to the electronics
* Five levels LED indicator displays remaining battery capacity
| SPECIFICATIONS
Light source: Six ultra bright LEDs
Luminous flux: 2400LM
LED lifespan: 50,000 hours
Shell material: Aluminum alloy and plastic
Switch: Two top click switch á wireless remote control.
Battery: 4x18650 Li-ion batteries(7.4V 5.2AH)
Battery life: 500 charge cycles
Runtime: 2.3hours € 100% brightness
Charging time: 3.5 - 4hours
Waterproof grade: IPX5
Size: LE3xW54x43MM
| PACKAGE CONTENTS
Your package includes the following items:
1. Light head 2. wireless remote switch 3.Handlebar mount 4, Battery pack
5. Charger 6. Three straps 7. Allen key for mounting
8. Warranty Card 9. User Manual
7 9 Ф + № =
= — BATTERY INDICATOR
e The power indicator is specially designed for this MAGICSHINE Bicycle Light to show remaining capacity of the
batteries.
7 8. 9
E
NET a
Battery Indicator
| OPTIONAL ACCESSORIES
Helmet Mount
100—80% 80— 60% 60~40% 40~20% 20~0%
| CHARGE THE BATTERY
OPERATION
Your battery has been partially charged at the factory.
If the device indicates a low battery capacity, do the following: Match the light and wireless remote control
* Connect the charger to a wall outlet.
* Connect the charger to the battery.
`
Red: Green:
Charging Fully charged
M key: on-off key & light modes shift key
+ key: increase brightness key / on-off key
- key: decrease brightness key / on-off key
1. Disconnect the bike light and battery.
2. Press the + key and - key at the same time, then release the two buttons at the same
time when the M key flashes.
3. Connect the bike light and battery quickly, quick press the + key or - key. When the
bike light flashes 3 times, the light is matched.
Wireless Remote Switch Operation
1. Press any key to turn on the light.
2. Press M key to shift light modes, there are three light modes: high-low beam ~ high
beam ~ low beam
3. Press + key to increase brightness successively, brightness grades are:
10%-25%-50%-75%-100%.
4. Press - key to decrease brightness successively, brightness grades are:
100%-75%-50%-25%-10%.
5. Press any key for 0.5 second to tum off the light.
Bike light itself switch operation
Left key: Right key:
On-off key & light modes shift key Adjust brightness key / on-off key
1. Press left key or right key to turn on the light.
2. Press left key to shift light modes, there are three light modes: high-low beam ~ high
beam - low beam.
3. Press right key to adjust the current brightness modes, brightness modes are:
100%-75%-50%-25%-10%.
remark:
1. Remote control range up to 1 meters.
2. Press left key or right key for 0.5 second to turn off the light.
MOUNTING
BIKE LIGHT MOUNTING
(O) >
A. Select the most suitable band for the diameter of your handlebar
B. Insert the cylindrical nut into the eye of the band
C. Attach the band to the mount by sliding the nut into the long slot
D. Introduce the clamping plate and screw assembly in the correct orientation and
loosely screw into the cylindrical nut
E. Place the mount on the handlebar with the realease button facing backwards. Wrap
the band under the bar and locate the T-shaped feature on the free end into the small
slot underside the front side of the mount
F. Align the mount to face forwards and using a 3mm allen key, tighten the clamp screw
until the mount is firm. Do not over-tighten.
G. Attach the light to the mount in a toe and heel’ action by first inserting the front edge
of the light's mounting peg into the mount and then pushing down at the rear.
H. If necessary, loosen the mount to adjust light beam direction and then retighten.
MOUNT THE BATTERY PACK
\.
Mount the battery to the frame of your bike.
\
J
Connect the light to the battery pack
BURN TIMES
Time(hour)
Brightness levels
16
20
24
28
32
38
40
High-low beam
10%
25%
50%
75%
100%
High beam
10%
25%
50%
75%
100%
Low beam
10%
25%
50%
75%
100%
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement