Battery Powered Hand Washing Faucet

Add to my manuals
2 Pages

advertisement

Battery Powered Hand Washing Faucet | Manualzz
Battery Powered Hand Washing Faucet
! Description
Battery Powered, Sensor Operated Electronic Hand Washing Faucet for
tempered or hot/cold water operation.
! Flow Rate
! 0.5 gpm/1.9 Lpm Vandal Resistant Spray Head
(See Accessories for other Spray Head options)
! Specifications
ADA Compliant, Sensor Activated, Battery Powered, Chrome Plated Brass Hand
Washing Faucet with the following features:
• Splash-proof Circuit Control Module
• Fiber Optic, Automatic, Self-adaptive Sensing
• Audible Tone Low Battery Indicator
• Serviceable Filtered Solenoid Valve
• Bak-Chek Tee for Hot/Cold Supply
• Trim Plate with Anti-Rotation Pin (specify 4” or 8”)
• Vandal Resistant Spray Head with Pressure Compensating Flow Control
• Polypropylene Optic Cable Protection
• Includes four (4) C-cell Alkaline Batteries
! Automatic
! Variations
(Add suffix to Model Number for inclusion with Faucet)
• Trim Plate (must be specified)
4
! -4
8
! -8
Trim Plate for 4” Center-set Sink
Trim Plate for 8” Center-set Sink
!R
Plug-in Adapter
(includes 6 volt transformer for hard wire installation)
• Plug-in Adapter
• Temperature Mixing Valves (optional)
! ADM
! BDM
! BDT
! ADA Compliant
Above Deck Mechanical Mixing Valve
Below Deck Mechanical Mixing Valve
Below Deck Thermostatic Mixing Valve
Bak-Chek Tee not required or provided when a Temperature Mixing Valve is
included with the faucet.
Consult Factory for Finish Variations
! Accessories (Specify separately)
• Vandal Resistant Spray Heads
The Sloan OPTIMA Plus® EBF-85 Battery Operated,
Electronic Hand Washing Faucet operates by means of an
adaptive infrared sensor that is linked to the faucet by a
fiber optic cable. Once the user’s hands enter the sensor’s
effective range, the Solenoid activates the water flow.
Tempered water flows from the Faucet until hands are
moved away. The Faucet then automatically shuts off.
! Hygienic
The ultimate in sanitary protection — there are no handles
to turn or buttons to push. Helps to control the spread of
infectious diseases.
! Economical
Automatic operation provides water usage savings over
other faucet devices. Reduces maintenance and operation
costs. Self-adaptive Range Adjustment makes installation
quick and easy. Battery operation ideal for Retrofit
installations.
1027-A
A 2.2 gpm/8.3 Lpm Laminar Flow Spray Head
! ETF-1
(recommended for medical applications)
1022-A
A 2.2 gpm/8.3 Lpm Aerator
! ETF-1
! Warranty
460-A
A Chrome Plated Brass Grid Strainer w/1¼” Outlet Tube
! ETF-4
! ASME A112.18.1M
• Grid Strainer
3 year (limited)
! Made in the U.S.A
See OPTIMA Accessories Section of the Sloan Catalog for a complete listing of
OPTIMA Faucet Accessories and Variations.
This space for Architect/Engineer approval
Job Name
Date
Model Specified
Quantity
Variations Specified
Customer/Wholesaler
Contractor
Optima Plus EBF-85 S.S. — Rev. 1a (01/02)
Architect
The information contained in this document is subject to change without notice.
FAUCET DIMENSIONS
(Shown with 4” Trim Plate)
! Description
Battery Powered, Sensor Operated Electronic Hand Washing Faucet for
tempered or hot/cold water operation.
2”
(51 mm)
5-1/8”
(130 mm)
! Flow Rate
! 0.5 gpm/1.9 Lpm Vandal Resistant Spray Head
(See Accessories for other Spray Head options)
5-3/4”
(146 mm)
ELECTRICAL SPECIFICATIONS
! Control Circuit
6 VDC — Operates on four (4)
alkaline C-cell batteries. Selfadaptive Range Adjustment,
Audible Troubleshooting and
Low Battery Indicator. Fiber
Optic Cable between Electronic
Module and Faucet keeps all
electronic signals below the
sink.
! Battery Life
2 years at 8,000 cycles/month
! OPTIMA® Sensor Range
Nominal: 4”- 5” (102 mm 127 mm)
Self-adaptive Zone: 2” - 8”
(51 mm - 203 mm) — Faucet
self-adjustment range within this
zone dependent upon depth and
reflectivity of basin.
! Solenoid Valve
Low Energy Latching Solenoid
with Self-cleaning By-pass and
Integral Clean Out Strainer Filter.
1-5/16” (33 mm)
2-5/8”
(67 mm)
6-9/32”
(160 mm)
! Time Out Adjustment Settings
30 seconds — The Faucet Time out Setting determines the
maximum time the faucet will run upon continuous detection. The
EBF-85 is factory set at the 30 second time out. Consult factory for
time out settings to meet individual application requirements.
! Maximum Distance Control Module may be Installed from
Spout
30” (762 mm)
OPERATION
1. Continuous, invisible light
beams are emitted from the
OPTIMA® Sensor. Fiber optic
cables transmit the light from
the circuit to the spout.
EBF-85 Faucet with Bak-Chek Tee
for Hot and Cold Water Supply
(shown with 4” trim plate)
3. When hands are removed, the
water flow automatically
stops. The faucet is then
ready for the next user.
2. The faucet is activated by
placing hands beneath the
spray head, thus activating the
Solenoid Valve. Tempered
water flows for as long as
hands continue to stay within
the Sensor’s range (30 second
automatic shut off).
EBF-85 Faucet with ADM Variation Mixing
Valve for Hot and Cold Water Supply
(shown with 8” trim plate)
EBF-85 Faucet with BDM and BDT Variation
Mixing Valves for Hot and Cold Water
Supply (shown with 4” trim plate)
SLOAN VALVE COMPANY • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • http://www.sloanvalve.com
Copyright © 2002 Sloan Valve Company
Printed in the U.S.A.
Made in the U.S.A.
Optima Plus EBF-85 S.S. — Rev. 1a (01/02)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement