VBC4V9DN/LRe Long Range Vari-focal True Day / Night

VBC4V9DN/LRe Long Range Vari-focal True Day / Night
VBC4V9DN/LRe
Long Range Vari-focal
True Day / Night Bullet Camera
Installation Manual
RoHS Announcement
All lead-free products offered by the company comply with the requirements of the European
law on the Restriction of Hazardous Substances (RoHS) directive, which means our
manufacture processes and products are strictly “lead-free” and without the hazardous
substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must
be collected separately at the product end-of-life. This applies to your product and any
peripherals marked with this symbol. Do not dispose of these products as unsorted municipal
waste.
CE Mark
This apparatus is manufactured to comply with the radio interference. The company does not
warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or
remove any content in this manual at any time.
Power Supply Requirements
For use with listed Audio Video products and only connected to a 15W or less power supply.
The power supply should be a NEC Class 2 / LPS Supply
NORBAIN SD LTD reserves the right to make changes to the product and specification of the product from
time to time without prior notice.
CAUTION
IMPORTANT SAFEGUARDS
1.
READ AND RETAIN INSTRUCTIONS
Read the instruction manual before
operating the equipment. Retain the
manual for future reference.
2.
CLEANING
Use a damp cloth for cleaning. Do not
use harsh cleansers or aerosol cleaners.
3.
ATTACHMENTS
Do not use attachments unless
recommended by manufactured as they
may affect the functionality of the unit and
result in the risk of fire, electric shock or
injury.
8.
OVERLOADING
Do not overload wall outlets and
extension cords as this can result in a risk
of fire or electric shock.
9.
SERVICING
Refer all servicing to qualified service
personnel.
10. DAMAGE REQUIRING SERVICE
Unplug the equipment from the wall outlet
and refer servicing to qualified service
personnel under the following conditions:
A.
B.
4.
ACCESSORIES
Install the equipment in a safe, stable
environment. Install any wall or shelf
mounting accessory using the
manufacture’s instructions.
5.
POWER SOURCES
The equipment should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supplied at the
installation location, contact your dealer.
6.
CORD AND CABLE PROTECTION
Route power cords and cables in a
manner to protect them from damage.
7.
LIGHTNING
For protection of the equipment during a
lightning storm or when it left unattended
and unused for long periods, unplug the
unit from the wall outlet.
C.
D.
When the power supply cord or the
plug becomes damaged.
If the equipment does not operate
normally by following the operating
instructions, adjust only those
controls that are covered by the
operating instructions. Improper
adjustment of other controls may
result in damage to the unit.
If the equipment is dropped
causing damage.
When the equipment exhibits a
distinct change in performance.
11. REPLACEMENT PARTS
When replacement parts are required, be
sure the service technician uses
replacement parts specified by the
manufacturer or that have the same
characteristics as the original part.
12. SAFETY CHECK
Upon completion of any service or repairs
to the equipment, ask the service
technician to perform safety checks to
verify that the equipment is in proper
operating condition.
INTRODUCTION
These Long Range True Day / Night IR Bullet cameras have a unique twin glass
feature coupled with:
Features:
• High-performance 1/3” Super HAD CCD
• 540 lines Resolution:
• 0.1 Lux (LEDs On 0 Lux) sensitivity
• Twin Glass to prevent reflection
• Easy to adjust focus and zoom adjustments
• Vandal Resistant casing
• IP66
SYSTEM INSTALLATION
The camera must be installed by qualified service personnel in accordance with all
local and national electrical and mechanical. Perform the following steps to install the
camera.
1.
Drill a 21mm hole in the wall, for the video and power cable.
a.
2.
3.
If this is not possible, feed the video and power cable out of the
cable entry point on the side of the base and into conduit.
Drill three screw holes for the wall bracket. Use the screws provided or screws
that would better suit the mounting material.
Once the bracket is secured to the wall/ ceiling, point the camera in the desired
direction:
a.
4.
5.
6.
Loosen the Knurled ring on the rear of the camera and the two
securing nuts on the front of the bracket.
b. Once in the correct position tighten the knurled ring and securing
nuts.
Remove the protective film from the camera.
Zoom and Focus adjustment. Using a hex wrench (5/64 supplied) loosen the two
Lens fixing screws.
a. Zoom adjust (rear ring) Wide to Narrow (Clockwise).
b. Focus adjust (front ring) Near to Far.
c. When you have the desired image in sharp focus, tighten the lens
fixing screws.
Finally slide the sunshield forward enough to ensure that it will prevent direct
sunlight entering the camera.
SPECIFICATIONS
Power
Power source
Power consumption
12V DC
Max. 8.64 W /720mA (Day time 2.4W / 200mA)
Sensor Information
Image sensor
Electronic shutter
Temperature / Humidity
1/3” Super HAD CCD
1/50 ~ 1/100,000 sec
-10º C to 50º C
Video
Signal format
Resolution
Minimum illumination
Video output
S/N ratio
Gamma
DC iris level
Connectors & Mechanical
Video output
Power input
Twin Glass
LEDs
Dimensions
Sunshield
Weight
Mounting hole
Mounting bracket
625 lines
540 TV lines
0.1Lux Colour / CDS On 0.0 Lux
1.0Vp-p, 75 ohms
45dB (AGC OFF)
0.45
Adjustable (POT)
BNC connector
Video service plug
2.1mm Jack
Separate glass for the camera and LEDs
48 850nM LEDs
80W x 80H x 120D mm
145mm long
1.13Kg including Bracket and sunshield
1 / 4” - 20 UNC Rear
105mm long
NORBAIN SD LTD
210 Wharfedale Road,
Winnersh Triangle,
Wokingham,
Berkshire RG415TP
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement