“e” series - SVF Flow Controls
“E” SERIES
Automation & Controls Product Group of SVF Flow Controls
NEXTEK “E” Series Actuators are geared motors
that provide rotary output (torque) to power all
types of rotary valves (ball, plug and butterfly
valves as well as dampers and diverters). Output
is achieved through the application of a supply
voltage (AC or DC). Rotary action is controlled
through two limit switches (one for “OPEN” and
one for “CLOSED”) located in the unit and in
conjunction with two cams. Precise setting of
either position is achieved by adjusting the cam
to activate the switch at exactly the desired point
in the rotary cycle. The power wiring procedure
is indicated on the wiring diagram supplied with
each unit.
ELECTRIC ACTUATORS
“E” Series
“E” SERIES ACTUATOR
MODEL E200W2E (NEMA 4)
REVERSING MOTORS
”E” SERIES DESIGN FEATURES
“E” Series electric, rotary actuators are designed to provide
the operating torque required to automate our full line of
process-quality ball valves. All “E” Series electric actuators
are available with the following features:
q Heavy-duty, fully enclosed, high performance motor
is rated for both On/Off and modulating service.
q Actuator housing and fasteners meet NEMA 4
guidelines (weatherproof) or NEMA 7 (hazardous
locations) requirements.
Reversible motors open the valve in one direction
and close the valve in the reverse direction. Reversible motors are ideal for precise flow control, since the
actuator does not have to travel through the full stroke
to start the reverse stroke. For example, one coil in the
motor controls the counter-clockwise rotation or “open
cycle” while the other coil controls the clockwise or
“closing cycle”.
q Corrosion protection with thermally bonded
polyester coating.
q Operating speeds and output torque generated
through a permanently lubricated gear train.
”E” SERIES APPLICATIONS
q Excellent for use in systems where compressed air
for actuation is either unavailable or impractical.
q All motors feature integral thermal overload
q Electric control circuits may be designed for virtually
protection.
any control scheme.
q Designed for operation in temperatures from -40OF
to 150OF.
q Readily interfaces with all electric control schemes.
q Ideal for multi-ported valves. Provides three or four
q All models feature a manual override, ISO mounting
pad and are wired for light indication.
q Standard travel-stop limit switches can
simultaneously be used for light indication.
distinct stop positions.
q May be used in manual jogging systems.
q When fitted with a heater, electric actuators are well
suited for use in sub-freezing environment.
SVF Flow Controls • 5595 Fresca Drive • La Palma, CA 90623 • Tel: 800.783.7836 • FAX: 562.802.3114 • [email protected]
Specifications subject to change w/o notice. All Data Sheets on our website supersede prior publications • (SVF.NEXTEK_ESERIES.0317)
“E” SERIES
Automation & Controls Product Group of SVF Flow Controls
ELECTRIC ACTUATORS
SAMPLE SPECIFICATION
All “E” Series Electric Actuators shall be reversible type, capacitor run motor design, thermally protected and
with a permanently lubricated hardened steel gear train.
Each actuator shall be available with a manual override, visual position indication and ISO standard mounting
arrangement as offered by NEXTEK Controls, Automation & Controls Product Group of SVF Flow Controls, Inc.
MANUAL
OVERRIDE
THERMALLY BONDED
POLYESTER POWDER
COATING
REVERSIBLE MOTOR
115 VAC (Standard)
220 VAC/50/60 Hz
12 VDC, 24 VDC
VISUAL POSITION
INDICATOR
ENCLOSURE
MEETS NEMA 4 RATING
(NEMA 4X AND
NEMA 7 AVAILABLE)
ENCLOSED
GEAR TRAIN IS
PERMANENTLY
LUBRICATED
OPTIONAL
ELECTRONIC POSITIONER
4-20 mA INPUT
Sample Specification based on “E” Series Model E675W4EC (shown above), and Models E1000W4EC and E1500W4EC.
2
SVF Flow Controls • 5595 Fresca Drive • La Palma, CA 90623 • Tel: 800.783.7836 • FAX: 562.802.3114 • [email protected]
Specifications subject to change w/o notice. All Data Sheets on our website supersede prior publications • (SVF.NEXTEK_ESERIES.0317)
“E” SERIES
ELECTRIC ACTUATORS
Automation & Controls Product Group of SVF Flow Controls
OPTIONAL EQUIPMENT FOR “E” SERIES ACTUATORS
q Electromechanical Brake
q Timer Control
q Voltages 115 VAC Standard
q Three-Position Control
Eliminates oscillation when seating butterfly valves.
Optional 220 VAC/50/60 Hz, 12VDC, 24 VDC.
Operates the actuator at specified intervals.
For use with multi-ported valves.
q Auxiliary Switches
Two additional limit switches may be added for interlocking q Local Control Station
other equipment such as pumps, compressors, mixers or
Externally mounted pushbutton station.
other valves.
q Two-Wire Control
q Heater & Thermostat
To meet some digital interface control systems.
O
For operation at low temperature (to -40 F). Also used
to combat condensation in high humidity areas. The
combination heater/thermostat will maintain the temperature q Torque Sensor Control
Protects the actuator in the event of unforeseen
of the enclosure at 40OF.
torque increases often associated with valve wear
q Analog Positioner
or pipeline obstructions.
Accepts 4-20 mA input signal or optional 1-5 and
10-50 mA, 0-10 VDC are available.
q Reversing Contactor
For three-phase motor operation. (Only available
q Speed Control Circuit
on some models - consult SVF).
Pulsing circuit to adjust (slow) the overall cycle time.
“E” SERIES MATERIALS OF CONSTRUCTION
3
ITEM #
DESCRIPTION
MATERIALS
1
Housing
Cast Aluminum
2
Coating
Thermally Bonded Polyester Coating
3
Gearing
Hardened Steel (Permanently Lubricated)
4
Output Shaft
Carbon Steel
5
Cover Bolts
Stainless Steel
SVF Flow Controls • 5595 Fresca Drive • La Palma, CA 90623 • Tel: 800.783.7836 • FAX: 562.802.3114 • [email protected]
Specifications subject to change w/o notice. All Data Sheets on our website supersede prior publications • (SVF.NEXTEK_ESERIES.0317)
“E” SERIES
ELECTRIC ACTUATORS
Automation & Controls Product Group of SVF Flow Controls
HAZARDOUS AREA RATINGS FOR NEMA 7 ENCLOSURES
NEMA-7 enclosures are designed to meet or exceed
specifications for use in:
q Class I, Groups C and D
q Class II, Groups E, F and G
q Divisions I and II
q Maximum Temperature = 140O F
Models E200 and E300 are CSA certified. File# LR79567
u
Class I, Groups C and D
u
Class II, Groups E, F and G
u
Divisions I and II
“E” SERIES ISO 5211 MOUNTING DIMENSIONS
“E” SERIES
MODEL
E100W
E100X
E200W
E200X
E200W (M)
E300W
E300X
E300W (M)
E400W
E675W
E675X
E1000W
E1000X
E1500W
E1500X
E2000W
E2000X
E3840W
E3840X
E5000W
E5000X
E7020W
E7020X
E11520W
E11520X
in.
ISO
MOUNTING
BOLTS
(Qty - 4)
1.417
1.417
1.417
1.969
1.417
1.417
1.969
1.417
2.756
2.756
2.756
2.756
2.756
2.756
2.756
-
F03
F03
F03
F05
F03
F03
F05
F03
F07
F07
F07
F07
F07
F07
F07
-
10-24x0.44
10-24x0.44
10-24x0.44
1/4-20x0.44
10-24x0.44
10-24x0.44
1/4-20x0.44
10-24x0.44
5/16-18x0.40
5/16-18x0.40
5/16-18x0.40
5/16-18x0.40
5/16-18x0.40
5/16-18x0.40
5/16-18x0.40
-
BOLT CIRCLE #1
TORQUE
BOLT CIRCLE #3
ISO
MOUNTING
BOLTS
(Qty - 4)
in.
F05
F05
F05
F05
F05
F05
F10
F10
F10
F10
F07
F07
F07
F07
-
1/4-20x0.44
1/4-20x0.44
1/4-20x0.44
1/4-20x0.44
1/4-20x0.44
1/4-20x0.44
3/8-16x0.56
3/8-16x0.56
3/8-16x0.56
3/8-16x0.56
5/16-18X0.63
5/16-18X0.63
5/16-18X0.63
5/16-18X0.63
3/8-16 X .63
3/8-16 X .63
3/8-16 X .63
3/8-16 X .63
3/8-16 X .63
3/8-16 X .63
2.756
2.756
2.756
2.756
4.015
4.015
4.015
4.015
5.5118
5.5118
5.5118
5.5118
5.5118
5.5118
BOLT CIRCLE #2
in.
1.969
1.969
1.969
1.969
1.969
1.969
4.015
4.015
4.015
4.015
2.756
2.756
2.756
2.756
4.242
4.242
4.242
4.242
4.242
4.242
ISO
MOUNTING
BOLTS
(Qty - 4)
in-lbf
Nm
F07
F07
F07
F07
F10
F10
F10
F10
F14
F14
F14
F14
F14
F14
5/16-18x0.5
5/16-18x0.5
5/16-18x0.5
5/16-18x0.5
3/8-16 X .63
3/8-16 X .63
3/8-16 X .63
3/8-16 X .63
5/8-11 X .75
5/8-11 X .75
5/8-11 X .75
5/8-11 X .75
5/8-11 X .75
5/8-11 X .75
100
100
200
200
200
300
300
300
400
675
675
1000
1000
1500
1500
2000
2000
3840
3840
5000
5000
7020
7020
11520
11520
11
11
23
23
23
34
34
34
45
76
76
113
113
169
169
226
226
434
434
565
565
793
793
1302
1302
TORQUE
W= NEMA 4 | X= NEMA 7 | (M)= Modulating
The table above provides the dimensions necessary to mount
“E” Series actuators to a valve supplied by SVF Flow Controls, Inc.
The Bolt Circle Dimensions include “ISO 5211” dimensions, the
International Standard for mounting pad dimensions.
Several SVF Valve Series are direct mount. Other valve series may
require the addition of a mounting kit.
Contact SVF for additional information.
NOTE: Not all actuators have three Bolt Circles.
4
SVF Flow Controls • 5595 Fresca Drive • La Palma, CA 90623 • Tel: 800.783.7836 • FAX: 562.802.3114 • [email protected]
Specifications subject to change w/o notice. All Data Sheets on our website supersede prior publications • (SVF.NEXTEK_ESERIES.0317)
“E” SERIES
ELECTRIC ACTUATORS
Automation & Controls Product Group of SVF Flow Controls
DIMENSIONS, WEIGHT (MODELS E100 ~ E1500)
“E” SERIES
MODEL
in.
E100W
A
mm
in.
5.75
146
E100X
6.06
E200W
E200X
B
mm
in.
4.72
120
154
4.95
6.88
175
8.53
E200W (M) 7.34
C
mm
in.
1.31
33
126
1.34
6.13
156
217
6.39
186
D
mm
in.
0.87
22
34
1.60
1.76
45
162
1.39
6.88
175
E
mm
in.
0.39
10
41
0.39
2.43
62
35
2.23
2.11
54
F
mm
in.
4.13
105
10
5.25
0.63
16
57
0.63
2.23
57
G
H
mm
Weight
lbs
kg
mm
in.
0.43
11
0.89
23
5
2.3
133
0.35
9
0.89
23
5
2.3
4.25
108
0.55
14
0.91
23
7
3.2
16
8.66
220
0.55
14
-
-
15
6.8
0.63
16
4.75
121
0.55
14
-
-
7
3.2
E300W
6.88
175
6.13
156
1.76
45
2.43
62
0.63
16
4.25
108
0.55
14
0.91
23
7
3.2
E300X
8.53
217
6.39
162
1.39
35
2.23
57
0.63
16
8.66
220
0.55
14
-
-
15
6.8
E300W (M) 7.34
186
6.88
175
2.11
54
2.23
57
0.63
16
4.75
121
0.55
14
-
-
7
3.2
E400W
7.00
178
7.09
180
1.76
45
1.80
46
0.63
16
7.00
178
0.67
17
1.94
49
13
5.9
E675W
7.00
178
7.09
180
1.76
45
1.80
46
0.63
16
7.00
178
0.67
17
1.94
49
13
5.9
E675X
8.50
216
7.10
180
1.76
45
1.85
47
0.63
16
8.50
216
0.67
17
1.90
48
13
5.9
E1000W
7.00
178
7.09
180
1.76
45
1.80
46
0.63
16
7.00
178
0.67
17
1.94
49
13
5.9
E1000X
8.50
216
7.10
180
1.76
45
1.85
47
0.63
16
8.50
216
0.67
17
1.90
48
13
5.9
E1500W
8.50
216
7.09
180
1.76
45
1.80
46
0.63
16
7.00
178
0.67
17
1.94
49
17
7.7
E1500X
8.50
216
7.09
180
1.76
45
1.80
46
0.63
16
8.50
216
0.67
17
1.90
48
17
7.7
W= NEMA 4 | X= NEMA 7 | (M)= Modulating
5
SVF Flow Controls • 5595 Fresca Drive • La Palma, CA 90623 • Tel: 800.783.7836 • FAX: 562.802.3114 • [email protected]
Specifications subject to change w/o notice. All Data Sheets on our website supersede prior publications • (SVF.NEXTEK_ESERIES.0317)
“E” SERIES
ELECTRIC ACTUATORS
Automation & Controls Product Group of SVF Flow Controls
DIMENSIONS, WEIGHT (MODELS E2000 ~ E11520)
“E” SERIES
MODEL
A
in.
B
in.
C
in.
D
in.
E
in.
F
in.
G
in.
H
in.
J
in.
K
in.
L
in.
M
in.
N
in.
P
in.
Weight
lbs
E2000
E3840
E5000
E7020
E11520
10.0
10.0
14.0
14.0
14.0
9.96
9.96
14.0
14.0
14.0
2.50
2.50
5.00
5.00
5.00
3.25
3.25
4.94
4.94
4.94
1.19
1.19
1.19
1.60
1.60
10.0
10.0
13.0
13.0
13.0
1.12
1.12
1.12
1.12
1.12
6.00
6.00
7.00
7.00
7.00
3.75
3.75
5.31
5.31
5.31
6.25
6.25
13.0
13.0
13.0
7.0
7.0
10.0
10.0
10.0
3.0
3.0
4.31
4.31
4.31
3.75
3.75
5.44
5.44
5.44
3.75
3.75
5.31
5.31
5.31
30
30
100
100
100
“E” SERIES
MODEL
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
H
mm
J
mm
K
mm
L
mm
M
mm
N
mm
P
mm
E2000
E3840
E5000
E7020
E11520
254
254
356
356
356
253
253
356
356
356
64
64
127
127
127
83
83
125
125
125
30
30
30
41
41
254
254
330
330
330
28
28
28
28
28
152
152
178
178
178
95
95
135
135
135
159
159
330
330
330
178
178
254
254
254
76
76
109
109
109
95
95
138
138
138
95
95
135
135
135
Weight
kg
14
14
46
46
46
MODELS E2000 ~ E3840
MODELS E5000 ~ E11520
6
Across Flats: 0.875” (22mm)
Across Flats: 0.875” (22mm)
SVF Flow Controls • 5595 Fresca Drive • La Palma, CA 90623 • Tel: 800.783.7836 • FAX: 562.802.3114 • [email protected]
Specifications subject to change w/o notice. All Data Sheets on our website supersede prior publications • (SVF.NEXTEK_ESERIES.0317)
“E” SERIES
ELECTRIC ACTUATORS
Automation & Controls Product Group of SVF Flow Controls
“E” SERIES ELECTRIC ACTUATOR - QUICK REFERENCE GUIDE
“E” SERIES
MODEL
STANDARD
VOLTAGE
LOCKED
ROTOR CURRENT
WIRE SIZE
E100
115/60/1
0.55 amps
AWG 14
1 x 1/2”
2.5
75%
E200
115/60/1
0.75 amps
AWG 14
1 x 1/2”
5
25%
E300
115/60/1
0.99 amps
AWG 14
1 x 1/2”
5
25%
E400
115/60/1
0.75 amps
AWG 14
1 x 1/2”
10
25%
E675
115/60/1
0.75 amps
AWG 14
1 x 1/2”
15
25%
E1000
115/60/1
1.1 amps
AWG 14
1 x 1/2”
15
25%
E1500
115/60/1
1.1 amps
AWG 14
1 x 1/2”
30
25%
E2000
115/60/1
1.5 amps
AWG 14
1 x 3/4”
12
100%
E3840
115/60/1
2.9 amps
AWG 14
1 x 3/4”
14
100%
E5000
115/60/1
2.9 amps
AWG 14
1 x 3/4”
68
100%
E7020
115/60/1
4.1 amps
AWG 14
1 x 3/4”
68
100%
E11520
115/60/1
7.1 amps
AWG 14
1 x 3/4”
68
100%
CONDUIT SIZE SPEED Sec/90O
DUTY CYCLE
HOW TO ORDER “E” SERIES ELECTRIC ACTUATORS
MODEL
E100
E200
ENCLOSURE
W= NEMA 4
Weatherproof
E300
E400
E675
X= NEMA 7
Hazardous Area Locations
VOLTAGE
1= 12 VDC
2= 24 VDC
4= 115 VAC
5= 230 VAC
6= 24 VAC
E1000
E1500
E2000
V= NEMA 4X
(4X Option on NEMA 4 Model Only)
DUTY CYCLE
S= 25%
E= 75%*
F= 100%**
* 75% Duty Cycle is Standard
on Model E100 and Optional on
Models E200 thru E1500
** 100% Duty Cycle is only
available on Models E2000 thru
E11520 (Standard).
E3840
E5000
OPTIONS
C= Control Package
P= Potentiometer (1K)
S1= Limit Switch Kit (1- SPDT)t
S2= Limit Switch Kit (2- SPDT)t
T= Heater & Thermostat
D= 180O 3-Position
K= Brake (Power off 115 VAC)
t All limit switches are rated 15A,
1/2HP at 125-150 VAC; 0.5A at 125
VDC
E7020
E11520
Order Example: (E100W4ET)
Example Description: E100 actuator, NEMA 4 weatherproof enclosure, 115 VAC, 75% duty cycle, heater & thermostat option.
E100
7
W
4
E
T
SVF Flow Controls • 5595 Fresca Drive • La Palma, CA 90623 • Tel: 800.783.7836 • FAX: 562.802.3114 • [email protected]
Specifications subject to change w/o notice. All Data Sheets on our website supersede prior publications • (SVF.NEXTEK_ESERIES.0317)
“E” SERIES
Automation & Controls Product Group of SVF Flow Controls
ELECTRIC ACTUATORS
WIRING DIAGRAMS
STANDARD WIRING DIAGRAM FOR SINGLE PHASE
AC, ON-OFF CONTROL.
STANDARD WIRING DIAGRAM FOR SINGLE PHASE AC, ON-OFF CONTROL.
Consult NEXTEK Controls for more wiring information.
WIRING DIAGRAM FOR 1Ph/60Hz ELECTRIC ACTUATOR
WITH 4-20mA, 0-5VDC or 0-10VDC CONTROL
WIRING DIAGRAM FOR 1Ph/60Hz ELECTRIC ACTUATOR WITH
4-20mA, 0-5VDC or 0-10VDC CONTROL
WIRING DIAGRAM FOR TWO-POSITION
ELECTRIC ACTUATOR - 12VDC OR 24VDC
WIRING DIAGRAM FOR TWO-POSITION ELECTRIC ACTUATOR
12VDC OR 24VDC
WIRING DIAGRAM FOR 115VAC THREE-POSITION
ACTUATOR
WIRING DIAGRAM FOR 115VAC THREE-POSITION ACTUATOR
Individual wiring diagram sheets are available upon request.
Please email our Engineering Department - [email protected]
Specifications subject to change without notice
8
SVF Flow Controls • 5595 Fresca Drive • La Palma, CA 90623 • Tel: 800.783.7836 • FAX: 562.802.3114 • [email protected]
Specifications subject to change w/o notice. All Data Sheets on our website supersede prior publications • (SVF.NEXTEK_ESERIES.0317)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement