QUICKTRONIC® Instant Start DL40 Universal Voltage Systems
www.sylvania.com
QUICKTRONIC® Instant Start DL40
Universal Voltage Systems
Normal Ballast Factor
QHE 40DL/SS ISN
High Efficiency Series
Lamp / Ballast Guide
40W T5 - DULUX L lamps
1 lamp QHE 1x40DL/UNV ISN-SC
2 lamp QHE 2x40DL/UNV ISN-SC
3-lamp QHE 3x­40DL/UNV ISN-SC
®
Primary Lamp Type:
FT40DL
Also operates:
FT40DL/28W/SS
FT40DL/25W/SS
Key System Features
• H
igh Efficiency Systems
over 90% efficient
• Universal voltage (120-277V)
• QUICKSENSE® ballast technology
(end-of-lamp-life sensing)
• Min. Starting Temp:
0°F (-18°C) for FT40DL and
FT40DL/28W/SS
50°F (10°C) for FT40DL/25W/SS
• High luminous efficacy
• Virtually eliminates lamp flicker
• Quiet operation
• High power factor
• Low harmonic distortion
• Lightweight
• UL, CSA
• Auto Reset
• RoHS compliant
• Lead-free solder, printed circuit
board and manufacturing process
Application Information
SYLVANIA QUICKTRONIC
DL40 ballasts
are ideally suited for:
• Commercial
• Retail
• Hospitality
• Institutional
• Schools
• New construction
• Direct lighting
• Indirect lighting
• Surface mount
• Cove lighting
ECS234 – 1/2011
SYLVANIA QUICKTRONIC High Efficiency
(QHE) instant start DULUX L 40W ballasts
save up to 6 to 9% over standard
electronic ballasts without compromising
light output or lamp life. These systems
provide over 30% more lumen output
than 34T12 U-bend systems at nearly
the same power input. The small lamp
diameter and ballast profile provide
compact luminaire design options with
improved aesthestics and performance.
When paired with DULUX L SUPERSAVER®
lamps, these systems save an additional
14-33% over full wattage systems.
QUICKTRONIC QHE DL ballasts are
available in a one lamp, two lamp and
three lamp models, with universal input
voltage (120-277V). They are also RoHS
compliant and feature lead-free solder,
printed circuit boards and manufacturing
process.
System Information
QUICKTRONIC QHE DL ballasts instant
start operation to provide the highest
system efficacy and to assure low
temperature starting capability. Instant
start also provides for maximum remote
wiring distances.
QUICKSENSE ballast technology helps
to protect against overheated bases and
sockets, as well as cracking of the glass
wall, and uses dynamic end-of-lamplife sensing to avoid false shutdowns
caused by some static sensing methods.
QUICKSENSE ballast technology will auto
reset when the lamps are replaced with
new ones.
SYLVANIA QUICKTRONIC High Efficiency
(QHE) ballasts operate on input voltage
from 120V through 277V, eliminating
“wrong voltage” wiring errors and
reducing the number of models in
inventory by half.
A complete OSRAM SYLVANIA Ballast
Technology Applications and Specification
Guide showing performance characteristics for all combinations of lamps and
ballasts is available upon request.
Setting the standard for quality,
QUICKTRONIC QHE DL systems are
covered by the QUICK 60+® warranty,
the first and most comprehensive system
warranty in the industry
2-Lamp System
(2 x 2)
Input
Power (W)
Initial
System Lumens
System1
Efficacy
LPW
FB40T12 - Std. Magnetic Ballast
E.S. Magnetic Ballast
FB34T12 - E.S. Magnetic Ballast
96
86
72
5795
5795
4575
60
67
66
FBO32T8 - Magnetic
71
5415
76
DL40 - QHE2x40DL/UNV ISN-SC
DL40/28W/SS - QHE2x40DL/UNV ISN-SC
DL40/25W/SS - QHE2x40DL/UNV ISN-SC
68/67
64/63
50/49
5670
5990
4750
85
95
97
3-Lamp System (2 x 2)
Input
Power (W)
Initial
System Lumens
System1
Efficacy
LPW
110
9070
82
DL40 - QHE3x­40DL/UNV ISN-SC
100/99
8505
86
DL40/28W/SS - QHE3x­40DL/UNV ISN-SC
95/94
8990
96
DL40/25W/SS - QHE3x­40DL/UNV ISN-SC
74/73
7125
98
DL40- Std. Electronic ISN Ballast (0.96 BF)
1: System Efficacy calculation based on lowest input power value
SAME LIGHT, LESS POWER
Saves 14% … 15W with the new 3-Lamp QHE DL40/28W/IS SUPERSAVER System!
EVEN LESS POWER!
Saves 33% … 36W with the new 3-Lamp QHE DL40/25W/IS SUPERSAVER System!
Red
LAMP
LAMP
SPECIFICATION DATA
LAMP
Catalog #
LAMP
Date
QUICKTRONIC 2x32
High Efficiency
Blue
Black
Blue
BALLAST
White
Blue
Black
Blue
Red
High Efficiency
Universal
Voltage
(120-277V)
Black
Blue Black
Blue
White
Blue
BALLAST
White
Blue White
Blue
Red
White
BALLAST
Blue
Black
Green
Blue
1 Red
1
1 BALLAST
Yellow BlueBALLAST
Red
Input
Rated
Ballast
Mean
Input System3
Black
White
LAMP
BALLAST
1
1
Yellow
Red
Item
OSRAM SYLVANIA
Current
Lamp Lumens No. of Factor System System Wattage Efficacy
Red
LAMP
Description
(AMPS)
Type
(lm)
LAMP
(BF)
Lumens Lumens
Lamps
(W)
(lm/W) BEF 2
49428 QHE 1x40DL/UNV LAMP
ISN-SC 0.30/0.13 FT40T5
3150
1
0.90
2440 35/35
LAMP2835
LAMP
0.27/0.12
FT40DL/28W/SS 2800
1
1.07
2995
2695 32/32
LAMP
LAMP
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
For two lamp application, cap any blue lead. Insulate to 600 volts.
LAMP Note:
0.22/0.11 FT40DL/25W/SS
2500
1
0.96
2400
2160 27/26
QUICKTRONICLAMP
2x32
QUICKTRONICLAMP
3x32
LAMP
QHE 2x40DL/UNV ISN-SC 0.56/0.26
FT40T5
3150
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
49416
Pallet Pack
0.54/0.24 FT40DL/28W/SS 2800
LAMP
QUICKTRONIC
2x32
0.41/0.18 FT40DL/25W/SS 2500
49429
32
49430
49417
Note: For three lamp application, cap any unused blue lead. Insulate to 600 volts.
QHE 3x40DL/UNV ISN-SC 0.84/0.36
FT40T5 3150
4x32
0.79/0.35 QUICKTRONIC
FT40DL/28W/SS White
2800
Green
2500
BALLAST 0.62/0.27 FT40DL/25W/SSBlack
Pallet Pack
3
0.90
8505
3
1.07
8990
3 BALLAST
0.95
7125
7315
8090
6415
100/99 95/94 74/73 Pallet Pack contains 500 pieces, (add “-PAL” to Description).
White
White
BALLAST
1: Ballast factor
based upon 225mA nominal
lamp current for FT40DL and FT40DL/25W/SS andGreen
190mA nominal lamp
current for FT40DL/28W/SS.
Green
BALLAST
Black
Black
2: Ballast Efficiency
Factor (BEF) shown = (Ballast Factor x 100) divided by Input Wattage (Note: calculation based on lowest input wattage).
Blue
LAMP
Blue
3: System Efficacy calculation based on lowest input power value
Black
Yellow
Red
Red
LAMP
White
Blue
Red
Black
White
Red
QUICKTRONIC FM (1 LAMP)
LAMP
Note: For QT-FM green ground wire to terminal required. Red
o 600 volts.
0.91
1.14
1.30
Blue
Blue
Yellow
QUICKTRONIC FM (2 LAMP)
Red
LAMP
Note: For QT-FM green ground wire
to terminal required.
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC FM (2 LAMP)
Note: For QT-FM green ground wire to terminal required.
Note: For QT-FM green ground wire to terminal required.
ead. Insulate to 600 volts.
QUICKTRONIC 1x40DL
White
Black
White
Red
Red
BALLAST
Black
White
Red
Blue
Blue
BALLAST
Black
White
Blue
Blue
BALLAST
Black
White
Red
Blue
BALLAST
Blue
Blue
Blue
QUICKTRONIC 2x40DL
BALLAST
Blue
Blue
Blue
Blue
Red
LAMP
LAMP
QUICKTRONIC
QHE
Note: For one
lamp application, cap
any 2x40DL/UNV
blue lead. Insulate ISN-SC
to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
®
QUICKTRONIC 2x40DL
QUICKTRONIC 3x40DL
QUICKTRONIC 2x59*
®
Note: For
two lamp application,
cap 3x40DL/UNV
any blue lead. Insulate
to 600 volts.
QUICKTRONIC
QHE
ISN-SC
QUICKTRONIC 2x96IS
QUICKTRONIC 3x40DL
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 2x40DL
Blue
Blue
Red
ALLAST
Yellow
Red
QUICKTRONIC FM (2 LAM
Specifications
Note: For QT-FM green ground wire to terminal r
Data based on FT40T5
Starting Method: Instant Start
Ballast Factor: 0.90 (see table)
Circuit Type: Parallel
Lamp Frequency: >42kHz
Black
Lamp CCF: Less than 1.7
White
3
Starting Temp: 0°F (-18°C)
for BALLAST
Red
FT40DL and FT40DL/28W/SS
50°F (10°C) for FT40DL/25W/SS
Input Frequency: 60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
rated line (108-305V)
CSA
Certified
Note: For one lamp application, cap any blue lead. Insulate to 600
volts.
QUICKTRONIC® 1x40DL/UNVBlack
ISN-SC
x40DL
Blue
Blue
Blue
Blue
UL Listed Class P, Type 1 Outdoor
x32
ue
LAMP
Red
86 96
98
BlueBALLAST
LAMP LAMPRed Red
Blue
BALLAST
3.34
3.69
2
0.90
5670
4875 68/67 85 1.34
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
2
1.07
5990 QUICKTRONIC
5395 64/63 FM
95 (1 LAMP)
1.70
QUICKTRONIC
3x32
For QT-FM green
ground
required.
2
0.95
4750 Note:4275
50/49
wire
97to terminal
1.94
White
Green
Black
Blue
Blue
LAMP
Blue
2.57
81
94
92
White
Data based upon
GreenSYLVANIA DL40
BALLAST
lamps shown.Black
QUICKTRONIC® DL40
is also compatible with other lamp
manufacturers equivalent lamp types
that meet ANSI specifications. LAMP
QHE 40DL/SS ISN
LAMP
Performance Guide
Dimensions:
Black
Overall: 9.5" L x 1.68" W x 1.18" H (241mm LWhite
x 42mm W x 30mm H)
Blue
BALLAST
Yellow
Mounting: 8.90" (226mm)
Blue
Yellow
Red
Packaging:
Quantity: 10 pieces
Pallet Pack: 500 pieces
blue lead. Insulate to 600 volts.
LAMP
Weight: 1.6 lbs each (approx)
CLAMP
2x59*
ap2x96IS
any unused blue lead.
Insulate to 600 volts.
Wiring:
Leads
TRONIC 2x59* only (no connectors provided)
TRONIC 2x96IS
Item Number
Black
White
Yellow
Yellow
Blue
Blue
Red
Red
LAMP
Width
LAMP
4 Complies with European Union Restriction
of Hazardous Substances2x96HO
Directive
QUICKTRONIC
(Directive EC 2002/95)
QUICKTRONIC products are covered by
the QUICK 60+® warranty, a comprehensive lamp and ballast system
warranty. For additional details, refer
to the QUICK 60+ warranty bulletin.
Mounting
Length
Height LAMP
8.70 mm
Slot
3 Operation below 50°F (10°C) may
LAMP
affect light output
or lamp operation.
SUPERSAVER lamps operate at
LAMP
temperatures greater than 60°F (16°C)
System Life / Warranty
Blue
Blue
Red
Red
BALLAST
Note: For two lamp application, cap any blue lead. I
70°C Max Case Temperature
QUICKTRONIC 3x40D
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
RoHS Compliant4
Black
Blue
Remote
length
White Mounting (Max. wire Blue
Red
from
ballastBALLAST
case to lampholder):
Yellow
Yellow
18
ft: full wattage FT40DL Red
6 ft: energy saving FT40DL/SS
Length
QUICKTRONIC 2x96HO
LAMP
QUICKTRONIC 2x96HO
49430 QHE 3 x 40DL / UNV ISN SC
Case Size
QUICKTRONIC High Efficiency
Starting/Ballast Factor
Number of Lamps
Line Voltage (120-277V)
Primary Lamp Wattage
SYLVANIA, the system solution, See the World in a New Light, QUICKSENSE, SUPERSAVER and QUICK60+ are registered trademarks of OSRAM SYLVANIA Inc.
QUICKTRONIC and DULUX are registered trademarks of OSRAM GmbH.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Specifications subject to change without notice.
©2011 OSRAM SYLVANIA
Number
Note: For two lamp application, cap any blue lead. Insu
QUICKTRONIC 3x32
Comments
Blue
T
DL40 Instant Start
Type Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC
Prepared by 1x32
Project
LAMP
Normal Ballast FactorLAMP
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement