Eco-dimmer

Eco-dimmer
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex - France
Tel: 0 (+33) 5 55 06 87 87 Fax: 0 (+33) 5 55 06 88 88
www.legrand.com
Eco-dimmer
Catalogue number(s): 0 670 83 - 0 488 70/71
0 784 07 - 0 792 07 - 6 651 14 - 5 722 39 - 5 727 39 - 5 743 19/39
7 520 62 - 7 521 62 - 7 522 62 - 7 523 62
CONTENTS
Page
1. Use . . . . . . . . . . . . . . . . . . . . .
2. Range . . . . . . . . . . . . . . . . . . . .
3. Dimensions . . . . . . . . . . . . . . . .
4. Connection . . . . . . . . . . . . . . . .
5. Wiring . . . . . . . . . . . . . . . . . . .
6. Operation . . . . . . . . . . . . . . . . .
7. Technical features . . . . . . . . . . . .
8. Maintenance . . . . . . . . . . . . . . .
9. Standards and approvals . . . . . . .
1. USE
1
1
1
2
2
2-3
3-4
4
4
3. DIMENSIONS (mm)
Comfort with dimming:
2-wire eco-dimmer for any type of energy efficient lamp:
• Dimmable LED
• Dimmable compact fluorescent
• Fluorescent
• Halogen
A
C
D
B
2. RANGE
Colour
Céliane eco-dimmer
-
Cat. Nos.
A
B
C
D
0 670 83
45
45
33.5
7.2
0 670 83
0 784 07 - 0 792 07
45
45
33.5
9.6
5 722 39 - 5 727 39
5 743 19 - 5 743 39
45
45
33.5
9.6
Cat. Nos.
Niloé eco-dimmer
White
6 651 14
Niloé eco-dimmer
ready-to-install kit
White
0 488 71
Mosaic eco-dimmer
White
0 784 07
Mosaic eco-dimmer
ready-to-install kit
White
0 488 70
Mosaic eco-dimmer
Aluminium
0 792 07
Arteor square eco-dimmer
White
5 722 39
Arteor square eco-dimme
Aluminium
5 727 39
Arteor round eco-dimmer
White
5 743 19
Arteor round eco-dimmer
Aluminium
5 743 39
-
7 520 62
Valena
eco-dimmer
Valena eco-dimmer
White
7 521 62
Valena eco-dimmer
Ivory
7 522 62
Valena eco-dimmer
Aluminium
7 523 62
Technical data sheet: F01602EN/03
CONTENTS
s
B
C
D
+
A
Description
-
Cat. Nos.
A
B
C
D
6 651 14
80
80
30
20
7 520 62
74.7
74.7
32.1
8.6
7 521 62
7 522 62
7 523 62
74.7
74.7
32.1
11.5
Updated: 21/01/2015
Created on: 16/01/2013
1/4
Eco-dimmer
Catalogue number(s): 0 670 83 - 0 488 70/71
0 784 07 - 0 792 07 - 6 651 14 - 5 722 39 - 5 727 39 - 5 743 19/39
7 520 62 - 7 521 62 - 7 522 62 - 7 523 62
6. OPERATION
4. CONNECTION
In order to start up the different usage types, unclip the rocker
plates and press the buttons shown in the panel for 2 seconds.
Video animations available at www.legrandoc.com
Screw terminals
Terminal capacity: 2 x 2.5 mm2
Stripping length: 8 mm
5. WIRING
AUX1 / *ON
N
L
AUX2 button to be
activated using a
screwdriver
/ *OFF
LED
B
L
Wiring with Céliane pushbutton
+
N
L
B
L
50 m max.
Usage types
ON
+
-
Restore to factory configuration
(load recognition, capacitive mode,
pushbutton assembly, level memory)
X
X
X
X
Level memory activation
X
X
X
Level memory deactivation
X
X
X
Forced capacitive mode
(no load recognition)
X
X
X
Forced inductive mode
(no load recognition)
X
X
Children's bedrooms
(pre-set levels + night light)
X
X
X
Dimmer mode
X
Two-way switch mode
N
L
L
X
X
X
X
X
X
X
Pushbutton mode
B
X
X
X
Pre-set levels mode
Wiring two-way switch
X
AUX
X
*ON/OFF : button ON/OFF for Mosaic
The LED shows the dimmer status after the AUX button has
been pressed.
LED colour code:
Auto-capacitive
50 m max.
Continuous red  factory configuration
Forced capacitive Flashing red
Wiring with Niloé pushbutton
+
Auto-inductive
Continuous green
Forced inductive
Flashing green
N
L
B
L
50 m max.
Technical data sheet: F01602EN/03
CONTENTS
Updated: 21/01/2015
Created on: 16/01/2013
2/4
Eco-dimmer
Catalogue number(s): 0 670 83 - 0 488 70/71
0 784 07 - 0 792 07 - 6 651 14 - 5 722 39 - 5 727 39 - 5 743 19/39
7 520 62 - 7 521 62 - 7 522 62 - 7 523 62
6. OPERATION (continued)
 Troubleshooting
PROBLEM
CAUSES
SOLUTIONS
The lamp does not switch on
. The circuit is not powered up
. The dimmer is not wired correctly
. The lamp is broken
. The dimmer is broken
. The dimmer is in two-way switch mode and is wired
with a pushbutton (the status LED is flashing blue)
. Power up
. Check the wiring
. Replace the lamp
. Replace the dimmer
. Switch off the mains power to the dimmer circuit (reset the dimmer) and force the
dimmer to pushbutton mode (see manual)
The lamp is flickering and cannot be dimmed
. The lamp is not dimmable
. The ballast is not dimmable
. The lamp and ballast are not compatible
. The dimmer is broken
. Replace the lamp with a dimmable lamp
. Replace the ballast with a dimmable ballast
. Replace the lamp or the ballast to make them compatible
. Replace the dimmer
Dimming is not working correctly: (stop/restart;
dimming intermittently, etc.)
. The dimmer is in a mode that is not compatible with
the load
. Press the AUX2 button to switch on the status LED
- If the LED is green, set the dimmer
to capacitive mode (see manual)
AUX2
- If the LED is red, set the dimmer
to inductive mode (see manual)
LED
The lamp is flickering at max. lighting
Technical characteristics of the lamp
Adjust the upper threshold (see manual)
The lamp is flickering at min. lighting
Technical characteristics of the lamp
Adjust the lower threshold (see manual)
The lamp switches on but it cannot be dimmed or
switched off
. The dimmer is in pushbutton mode and is wired
with a two-way switch (status LED ?)
Force the dimmer to two-way switch mode
(see manual)
The lamp switches on unexpectedly by itself
. The dimmer is faulty
. Replace the dimmer
The lamp is making a noise
. The dimmer is in a mode that is not compatible with
the load
. The lamp is not dimmable, or can only be dimmed
a little
. Press the AUX2 button, etc. (see above)
. The dimmer is in a mode that is not compatible with
the load
. Press the AUX2 button, etc. (see above)
The dimmer is making a noise
. Replace the lamp
7. TECHNICAL FEATURES
 7.1 Admissible loads
R
L
()
1
C/L
(1)
Dimmable
Dimmable
(2)
(2)
LED
LED
Max.
400 W
400 W
400 VA
200 VA
400 VA
200 VA
75 VA
or 10 lamps max.
75 VA
or 10 lamps max.
Min.
3W
3W
3 VA
3 VA
3 VA
3 VA
3 VA
3 VA
Max.
200 W
200 W
200 VA
100 VA
200 VA
100 VA
37 VA
or 10 lamps max.
37 VA
or 10 lamps max.
Min.
3W
3W
3 VA
3 VA
3 VA
3 VA
3 VA
3 VA
240 V
100 V
Do not mix different load types on the same product.
(1) Only use transformers designed to operate with electronic switches.
(2) Operates with most dimmable lamps available on the market. In view of the wide variety of such lamps and the absence of relevant standards,
a prior test should be carried out to make sure lamps are compatible with the eco-dimmer.
Technical data sheet: F01602EN/03
CONTENTS
Updated: 21/01/2015
Created on: 16/01/2013
3/4
Eco-dimmer
Catalogue number(s): 0 670 83 - 0 488 70/71
0 784 07 - 0 792 07 - 6 651 14 - 5 722 39 - 5 727 39 - 5 743 19/39
7 520 62 - 7 521 62 - 7 522 62 - 7 523 62
7. TECHNICAL FEATURES (continued)
 7.2 Protection class
IP 40: assembled product
IP 20: without rocker plate
IK 02
 7.3 Material characteristics
Case: Polycarbonate
Rocker plate: ABS or PC
Halogen-free
UV resistance
Self-extinguishing:
+ 850°C / 30 s for insulating components holding in place live parts.
+ 650°C / 30 s for the other insulating components.
 7.4 Electrical characteristics
Voltage: 100 to 240 Vac
Frequency: 50-60 Hz
Consumption on standby: 0.1 W
 7.5 Climatic characteristics
Storage temperature: -10°C to +70°C
Usage temperature: 0°C to +35°C
8. MAINTENANCE
Clean the surface with a cloth.
Do not use: acetone, tar-removing cleaning agents or trichloroethylene.
Caution: Always test before using other special cleaning products.
9. STANDARDS AND APPROVALS
Compliant with installation and manufacturing standards.
See e-catalogue.
Technical data sheet: F01602EN/03
CONTENTS
Updated: 21/01/2015
Created on: 16/01/2013
4/4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement