HW160_brochure [EN].indd
With Tier 4 final / Stage IV Engine installed
*Photo may include optional equipment.
Net Power
Gross Power
Travel Speed
Operating Weight
SAE J1349 / 127 kW (171 HP) at 1,800 rpm
SAE J1995 / 134 kW (180 HP) at 1,800 rpm
35 km/h (21.7 mph)
17,100 kg (37,700 Ib)
RULE THE GROUND
The HW Series excavators are products of HHI’s spirit of initiative,
creativity and strong drive. HHI’s engineers, who are the best in
the industry, have worked tirelessly to offer a zero-defect product.
The new HW Series reflects customers’ needs in the field gleaned
by thorough monitoring. They maximize fuel efficiency and
performance proven by rigorous field tests and quality control.
*Photo may include optional equipment.
RULE THE GROUND
The HW series exceeds customers’ expectation!
Become a true leader on the ground with HHI’s HW series.
WORK MAX,
WORTH MAX
· ECO Gauge
· IPC (Intelligent Power Control)
· New Variable Power Control
· Electronic Viscous Fan Clutch
· Attachment Flow Control (Option)
· New Cooling System with Increased Air Flow
· Enlarged Air Inlet with Grill Cover
· Cycle Time Improvement
· Boom Floating Control (Option)
MORE RELIABLE,
MORE SUSTAINABLE
· Durable Cooling Module
· Reinforced Pin, Bush and Polymer Shim
· Reinforced Durability of Upper and Lower
Structure and Attachments
· Hi-grade (High-pressure) Hoses
INFOTAINMENT
FRONTIER
· Intelligent and Wide Cluster
· Haptic Control
· Wi-Fi Direct with Smart Phone (Miracast)
· Proportional Auxiliary Hydraulic System
· New Audio System
· New Air Conditioning System
04
MODERN COMFORT,
SIMPLE AND SAFE SOLUTION
· AAVM (Advanced Around View Monitoring)
Camera System (Option)
· Easy Access to DEF/AdBlue® Supply System
· Hi-mate (Remote Management System) (Option)
· Swing Lock System (Option)
· Fine Swing Control (Option)
*Photo may include optional equipment.
05
UP to 9%
More fuel-efficient in
truck loading and leveling
(Compared to 9 Series)
S mode
2%
Faster truck loading
(Compared to 9 Series)
P mode
90%
Reduction in PM & NOx
(Compared to 9 Series)
*Photo may include optional equipment.
Fuel Rate Information
Cycle Time Improvement
The HW Series provides higher productivity on the site by faster operation: it loads trucks up to 2% faster than
the 9 Series.
06
WORK MAX,
WORTH MAX
Fuel Efficient System, Allows Great Performance
The HW Series has an eco-friendly, high-performance engine which ensures both
excellent fuel efficiency and high power. With outstanding operating performance
proven by rigorous tests at various work sites, it will satisfy any customer’s needs.
MCV
ECM
MCU
ECO Colored Gauge
IPC (Intelligent Power Control)
New Variable Power Control
ECO Gauge enable economic operation of
machines. The gauge level and color displays
engine torque and fuel efficiency level. On
top of that, the status of fuel consumption
such as average rate and the total amount
of fuel consumed are displayed. Hourly
and daily based fuel consumption can be
checked in the detailed menu as well.
The IPC controls power control depending
on work environments. Its mode can be
selected and released on the monitor. On
the excavation mode, pump flow can be
easily controlled by a lever, reducing fuel
consumption.
The HW Series minimizes equipment input
and output control signals to improve fuel
efficiency. Its three-stage Power mode
ensures the highest performance in any
operating environment.
* P (power) mode: Maximizes speed and power of
the equipment for heavy load work.
* S (standard) mode: Optimizes performance and
fuel efficiency of the equipment for general load
work.
* E (economy) mode: Improves the control system
for light load work.
Electronic Viscous Fan Clutch
The electronic fan clutch reduces noise
during operation by precisely controlling
RPM depending on the hydraulic oil and
coolant temperature of the working vehicle,
and minimizes fuel consumption. It is also
possible to shorten the warm up time of
hydraulic oil.
Attachment Flow Control (Option)
The HW Series improves pump flow rate
by independent control of two pumps. It
optimizes attachments for effective flow
rate setting depending on attachments
(ten breaker types and ten crusher types),
enabling various operations matching the
site environments.
New Cooling System with
Increased Air Flow
The HW Series provides excellent cooling
performance by increasing heat dissipation
and can be easily cleaned.
Enlarged Air Inlet with Grill Cover
Enlarged vent hole of the air inlet side cover
and fine net grill to prevent penetration of
foreign materials further improve durability.
07
MORE RELIABLE,
MORE SUSTAINABLE
New Exterior Design for Robustness and Safety
The true value of the HW Series lies in its durability. The robust upper and lower frame structure that can endure
external shock and high-load work and the attachments whose performance was proven by rigorous tests
further show the real value of the HW Series in tough working environments and promise higher productivity.
Chrome Coated Pins
Very high durables bush
Polymer Shim
Reinforced Pin, Bush and Polymer Shim
The HW series improves lubricity of connecting parts between the equipment and attachments. Gaps with attachments are minimized by
wear-resistant long-life pins, bushes and polymer shims, supporting the highest performance with invariable durability.
Durable Cooling Module
The HW series has a durable cooling module that passed
stringent tests, demonstrating the highest productivity in
tough working environments.
08
Reinforced Durability of Upper and Lower
Structure and Attachments
The upper and lower structure and attachments of the HW Series have
higher durability than demanded on the site, as proven through numerous
tests including road tests and virtual simulation. The wear resistance of the
bucket has been improved by use of new material.
*Photo may include optional equipment.
Hi-grade (High-pressure) Hoses
The HW Series uses high-pressure hoses with improved heat and pressure resistance, greatly
increasing the durability of the equipment.
09
*Photo may include optional equipment.
New Air Conditioning System
With further improved air conditioning and heating, the HW Series increases the APTC capacity by 15% to provide
a pleasant environment for operators all the time. The ventilation was designed such that warm and cool air even
reach operators’ faces (increasing their work satisfaction) or allowing pleasant working environment.
10
INFOTAINMENT
FRONTIER
Enhanced Instrument Panel for Easier Monitoring
Many electronic functions are concentrated on the most convenient spot for
operators to ensure work efficiency. The highly-advanced infotainment system, a
product of HHI’s intensive information technology, enables both productivity and
pleasant work at the same time! The HW Series of HHI provides higher value and
pleasure to customers.
Intelligent and Wide Cluster
Haptic Control
The 8-inch capacitive-type display (like smartphone display)
of the HW Series is 30% larger than the previous model,
delivering excellent legibility. The centralized switches on
the display allow convenience of checking the urea level
and temperature outside the cabin. The audio AUX, air
conditioner, heater interoperation, wiper, lamps, overload
warnings, travel alarm and inclination sensor also maximize
operator’s convenience.
The integrated jog shuttle-type haptic controller applies to
the accelerator, remote air conditioner controller and operation of the cluster, allowing convenient operation. In the
event of failure of the haptic switch, the emergency mode is
activated on the cluster to ensure fail-safe function.
Wi-Fi Direct with Smart Phone (Miracast)
New Audio System
Radio player, USB-based MP3 player, integrated Bluetooth
hands-free feature, and built-in microphone allow convenient phone calls while in work and in transit. The radio player
was moved to the right side from the rear, allowing easier
access.
The Miracast system based on Wi-Fi of the operator’s smart phone enables easy and convenient
use of various features of the smart phone on
the big screen including navigation, web surfing,
viewing of videos, and listening to music. (For
Android mobile phone now)
Proportional Auxiliary Hydraulic System
· Opt: Proportional control switch for better speed control
· Enlarge the operation convenience
11
MODERN COMFORT,
SIMPLE AND SAFE SOLUTION
New Cabin for More Comfort
Low noise, low vibration, and ergonomic design make the cabin space more comfortable and pleasant!
With focus on safety and convenience of operators, the HW Series allows rapid and safe equipment inspection
anytime and anywhere, providing an optimal environment for operators to work.
AAVM (Advanced Around View Monitoring)
Camera System (Option)
The HW Series has a state-of-the-art AAVM video camera
system to secure field of vision for operators in all directions,
thereby preventing accidents. Operators can easily check the
workplace in the front, rear and to the right and left.
* AAVM (Advanced Around View Monitoring): Secure field of vision in all directions by
nine views including 3D bird’s eye view and 2D/4CH view.
* IMOD (Intelligent Moving Object Detection): Inform when people or dangerous
objects are detected within the range of operation (recognition distance: 5 m).
Easy Access to DEF/AdBlue® Supply System
Hi-mate (Remote Management System) (Option)
The DEF/AdBlue® tank is installed inside the tool box and
its inlet is remotely located for easy access and convenient
supply. Warning of overfill is given by a red lamp signal.
Hi-mate, Hyundai’s proprietary remote management system, provides
operators and dealer service personnel access to vital service and diagnostic
information on the machine from any computer with internet access. Users
can pinpoint machine location using digital mapping and set machine work
boundaries, reducing the need for multiple service calls. Hi-mate saves time
and money for the owner and dealer by promoting preventative maintenance and reducing machine downtime.
* Operation of the system may be affected by the condition of telecommunication signal
12
*Photo may include optional equipment.
Swing Lock System (Option)
Swing Lock System is provided to maintain stability when swing movement needs to be limited, improving
operating speed and productivity.
Fine Swing Control (Option)
Fine swing control is available for customer’s convenience when users want to control fine swing.
13
SPECIFICATIONS
ENGINE
CONTROL
Maker / Model
Cummins QSB6.7
Type
Water-cooled, 4-cycle diesel, 6-cylinder inline, Direct injection, Turbocharged, Charge
air cooled, Low emission
Rated
flywheel
horse
power
SAE
DIN
J1995 (gross)
134 kW (180 HP) at 1,800 rpm
J1349 (net)
127 kW (171 HP) at 1,800 rpm
6271/1 (gross)
134 kW (182 PS) at 1,800 rpm
6271/1 (net)
127 kW (173 PS) at 1,800 rpm
Max. torque
85.7 kgf·m (620 lbf·ft) at 1,500 rpm
Bore × stroke
107 × 124 mm (4.21’’ × 4.88’’)
Piston displacement
6,700 cc (409 cu in)
Batteries
2 × 12 V × 100 Ah
Starting motor
24 V - 4.8 kW
Alternator
24 V - 95 A
Type
Two variable displacement piston pumps
Max. flow
2 × 172 ℓ/min (45.4 US gpm/37.8 UK gpm)
Sub-pump for pilot circuit
Gear pump
Cross-sensing and fuel saving pump system
HYDRAULIC MOTORS
Bent - axis pistons motor
with brake valve and parking brake
Axial piston motor with automatic brake
RELIEF VALVE SETTING
Implement circuits
350 kgf/cm2 (4,970 psi)
Travel
380 kgf/cm2 (5,400 psi)
Power boost (boom, arm, bucket)
380 kgf/cm2 (5,400 psi)
Swing circuit
285 kgf/cm2 (4,050 psi)
Pilot circuit
40 kgf/cm (570 psi)
Service valve
Installed
2
HYDRAULIC CYLINDERS
Boom: 2-110 × 1,090 mm (4.1’’ x 42.9’’)
Arm: 1-115 × 1,235 mm (4.72’’ x 53.3’’)
Bucket: 1-105 × 995 mm (4.3’’ x 39.17’’)
Dozer Blade: 2-110 × 235 mm (4.3’’ x 9.25’’)
No. of cylinder
bore × stroke
Outrigger: 2-125 × 463 mm (4.9’’ x 18.7’’)
2-Piece Boom:
2-110 x 960 mm (4.5’’ x 37.79’’)
Adjust (boom):
1-160 x 650 mm (6.29’’ x 25.59’’)
DRIVES & BRAKES
4-wheel hydrostatic drive. Constant mesh, helical gear transmission provides
2 forward and reverse travel speeds.
Max. drawbar pull
Travel speed
Gradeability
10,720 kgf (23,636 lbf)
1st
9.5 km/h
2nd
35 km/h
35° (70 %)
Parking brake : Independent dual brake, front and rear axle full hydraulic power
brake.
- Spring released and hydraulic applied wet type multiple disk brake.
- Transmission is locked at neutral position for parking, automatically.
CONTROL
Pilot pressure operated joysticks and pedals with detachable lever provide almost
effortless and fatigueless operation.
14
Engine throttle
Electric, Dial type
Lights
Two lights mounted on the boom,
one under the battery box and
one under the cabin
AXLE & WHEEL
Full floating front axle is supported by center pin for oscillation. It can be
locked by oscillation lock cylinders. Rear axle is fixed on the lower chassis.
Tires
10.00-20-14PR, Dual (tube type)
10.00-20, Dual (solid type)
(Optional)
10.00-20-14PR, Dual (tube type)
Hydraulically actuated, orbitrol type steering system actuates on front
wheels through the steering cylinder.
MAIN PUMP
Swing
Two joysticks with one safety lever
(LH): Swing and arm
(RH): Boom and bucket (ISO)
STEERING SYSTEM
HYDRAULIC SYSTEM
Travel
Pilot control
Min. turning radius
6,300 mm (20’ 8’)
SWING SYSTEM
Swing motor
Fixed displacement axial piston motor
Swing reduction
Planetary gear reduction
Swing bearing lubrication
Grease-bathed
Swing brake (option)
Multi wet disc
Swing speed
9.3 rpm
SERVICE REFILL CAPACITIES
( ): option
Re-filling
liter
US gal
UK gal
Fuel tank
290
76.6
63.8
Engine coolant
19.5
5.2
4.3
Engine oil
23.7
6.26
5.21
Swing device - gear oil
6.2 (5.0)
1.64 (1.3)
1.36 (1.09)
Swing device - grease
(1.2)
(0.32)
(0.26)
Front
15.5
4.09
3.41
Rear
17.5
4.62
3.85
Hydraulic system (including tank)
270
71.3
59.4
Hydraulic tank
125
33.0
27.5
DEF/AdBlue®
27
7.1
5.9
Axle
UNDERCARRIAGE
Reinforced box-section frame is all-welded, low-stress.
Dozer blade and outriggers are available. A pin-on design.
Dozer blade
A very useful addition for leveling and
back filling or clean-up work.
Outrigger
Indicated for max. operation stability when
digging and lifting. Can be mounted on the
front/or the rear.
OPERATING WEIGHT (APPROXIMATE)
Operating weight, including 5,000 mm (16’ 5’’) Mono boom; 2,200 mm (7’ 3’’) arm;
SAE heaped 0.70 m3 (0.91 yd3) backhoe bucket, lubricant, coolant, full fuel tank,
full hydraulic tank and all standard equipments.
OPERATING WEIGHT
Rear dozer blade
17,100 kg (37,700 lb)
Rear outriggers
17,250 kg (38,030 lb)
Front outriggers and rear blade
18,050 kg (39,790 lb)
Front blade and rear outriggers
18,100 kg (39,900 lb)
Four outriggers
18,200 kg (40,120 lb)
1
BUCKET SELECTION GUIDE
& DIGGING FORCE
BUCKETS
All buckets are welded with high-strength steel.
SAE heaped
0.39 (0.51)
0.50 (0.65)
0.64 (0.84)
m3 (yd3)
0.70 (0.92)
0.70 (0.92)
0.76 (0.99)
SAE
heaped
0.69 (0.90)
0.75 (0.90)
Recommendation mm (ft.in)
Width
mm (in)
Capacity
m3 (yd3)
0.89 (1.16)
1.05 (1.37)
Weight
kg (lb)
CECE
heaped
Without
side cutters
With
side cutters
0.39 (0.51)
0.34 (0.44)
650 (25.6)
740 (29.1)
410 (900)
0.50 (0.65)
0.44 (0.58)
790 (31.1)
880 (34.6)
470 (1,040)
0.64 (0.84)
0.55 (0.72)
950 (37.4)
1,040 (40.9)
510 (1,120)
0.70 (0.92)
0.60 (0.78)
1,020 (40.2)
1,110 (43.7)
600 (1,320)
0.76 (0.99)
0.65 (0.85)
1,090 (42.9)
1,180 (46.5)
620 (1,370)
0.89 (1.16)
0.77 (1.01)
1,250 (49.2)
1,340 (52.8)
610 (1,340)
1.05 (1.37)
0.90 (1.18)
1,430 (56.3)
1,520 (59.8)
680 (1,500)
0.69 (0.90)
0.62 (0.81)
1,050 (41.3)
-
720 (1,590)
0.75 (0.98)
0.65 (0.85)
1,820 (71.7)
-
540 (1,190)
5,000 (16’ 5’’) Mono-boom
2,200 (7’ 3’’)
Arm
5,100 (16’ 9’’) 2-Piece boom
2,500 (8’ 2’’)
Arm
2,200 (7’ 3’’)
Arm
-
2,500 (8’ 2’’)
Arm
-
: Applicable for materials with density of 2,000 kg /m3 (3,370 lb/ yd3) or less
: Applicable for materials with density of 1,600 kg /m3 (2,700 lb/ yd3) or less
: Applicable for materials with density of 1,100 kg /m3 (1,850 lb/ yd3) or less
Heavy duty bucket
Ditching bucket
ATTACHMENT
Booms and arms are welded with a low-stress, full-box section design.
5.0 m (16’ 5’’) Mono-boom and 5.1 m (16’ 9’’) 2-Piece boom and 2.2 m (7’ 3’’) & 2.5 m (8’ 2’’) Arms are available.
DIGGING FORCE
Arm
Length
mm (ft.in)
2,200 (7’ 3’’)
2,500 (8’ 2’’)
Weight
kg (lb)
750 (1,650)
810 (1,790)
kN
98.1 [106.5]
98.1 [106.5]
SAE
kgf
10,000 [10,860]
10,000 [10,860]
22,050 [23,940]
Bucket
digging
force
ISO
SAE
Arm
crowd
force
ISO
lbf
22,050 [23,940]
kN
113.4 [123.1]
113.4 [123.1]
kgf
11,560 [12,550]
11,560 [12,550]
lbf
25,490 [27,670]
25,490 [27,670]
kN
76.0 [82.5]
66.4 [72.1]
kgf
7,750 [8,410]
9,770 [7,350]
16,930 [16,210]
lbf
17,090 [18,550]
kN
79.4 [86.2]
69.1 [75.1]
kgf
8,100 [8,790]
7,050 [7,650]
lbf
17,860 [19,390]
15,540 [16,870]
Remarks:
[ ]:
Power
Boost
Note : Arm weight includes bucket cylinder, linkage and pin
15
2
DIMENSIONS &
WORKING RANGE
HW160 MONO BOOM DIMENSIONS
5.0 m (16’ 5’’) Mono-boom and 2.2 m (7’ 3’’) Arm and rear dozer blade.
I
E
I’
D (D’)
F
K
J
J’
C
G
H
B
A
Unit : mm (ft·in)
A
Wheel base
2,600 (8’ 6’’)
Boom length
B
Overall width
2,500 (8’ 2’’)
Arm length
2,200 (7’ 3’’)
5,000 (16’ 5’’)
2,500 (8’ 2’’)
C
Ground clearance of counterweight
1,270 (4’ 2’’)
D
Rear-end distance
2,430 (8’ 0’’)
I
Overall length
(Traveling position)
8,400 (27’ 7’’)
8,390 (27’ 6’’)
D’
Rear-end swing radius
2,430 (8’ 0’’)
I’
8,410 (27’ 7’’)
Upperstructure width
2,475 (8’ 1’’)
Overall length
(Shipping position)
8,490 (27’ 10’’)
E
F
Overall height of cab
3,190 (10’ 6’’)
J
Overall height of boom
(Traveling position)
3,460 (11’ 4’’)
3,430 (11’ 3’’)
G
Min. ground clearance
340 (1’ 1’’)
H
Tread
1,914 (6’3’’)
J’
Overall height of boom
(Shipping position)
3,180 (10’ 5’’)
3,070 (10’ 1’’)
K
Overall height of guardrail
3,450 (11’4’’)
HW160 MONO BOOM WORKING RANGE
Unit : mm (ft·in)
A
A'
Boom length
F
D
5,000 (16’ 5’’)
Arm length
2,200 (7’ 3’’)
2,500 (8’ 2’’)
A
Max. digging reach
8,570 (28’ 1’’)
8,860 (29’ 1’’)
A’
Max. digging reach
on ground
8,360 (27’ 5’’)
8,650 (28’ 5’’)
B
Max. digging depth
5,350 (17’ 7’’)
5,650 (18’ 6’’)
B’
Max. digging depth
(8’ level)
5,120 (16’ 10’’)
5,450 (17’ 11’’)
C
Max. vertical wall
digging depth
4,710 (15’ 5’’)
5,100 (16’ 9’’)
D
Max. digging height
8,830 (29’ 0’’)
9,040 (29’ 8’’)
E
Max. dumping height
6,210 (20’ 4’’)
6,400 (21’ 0’’)
F
Min. front
swing radius
3,310 (10’ 10’’)
3,170 (10’ 5’’)
E
B B' C
8ft
16
3
DIMENSIONS &
WORKING RANGE
HW160 2-PIECE BOOM DIMENSIONS
5.1 m (16’ 9’’) 2-Piece boom and 2.2 m (7’ 3’’) Arm and rear dozer blade.
I’
I
K
D (D’)
E
J
L
F
J’
C
G
H
B
A
Unit : mm (ft·in)
A
Wheel base
2,600 (8’ 6’’)
Boom length
B
Overall width
2,500 (8’ 2’’)
Arm length
2,200 (7’ 3’’)
5,100 (16’ 9’’) 2-Piece boom
2,500 (8’ 2’’)
C
Ground clearance of counterweight
1,270 (4’ 2’’)
D
Rear-end distance
2,430 (8’ 0’’)
I
Overall length
(Traveling position)
6,580 (21’ 7’’)
6,600 (21’ 8’’)
D’
Rear-end swing radius
2,430 (8’ 0’’)
I’
8,490 (27’ 10’’)
Upperstructure width
2,475 (8’ 1’’)
Overall length
(Shipping position)
8,520 (27’ 11’’)
E
F
Overall height of cab
3,190 (10’ 6’’)
J
Overall height of boom
(Traveling position)
3,990 (13’ 1’’)
3,980 (13’ 1’’)
G
Min. ground clearance
340 (1’ 1’’)
H
Tread
1,944 (6’ 5’’)
J’
Overall height of boom
(Shipping position)
3,010 (9’ 11’’)
2,980 (9’ 9’’)
L
Overall height of guardrail
3,420 (11’ 3’’)
K
End of attachment to
steering wheel
3,310 (10’ 10’’)
3,330 (10’ 11’’)
HW160 2-PIECE BOOM WORKING RANGE
Unit : mm (ft·in)
A
Boom length
A'
F
D
E
5,100 (16’ 9’’) 2-Piece boom
Arm length
2,200 (7’ 3’’)
2,500 (8’ 2’’)
A
Max. digging reach
8,750 (28’ 8’’)
9,040 (29’ 8’’)
A’
Max. digging reach
on ground
8,540 (28’ 0’’)
8,840 (29’ 0’’)
B
Max. digging depth
5,220 (17’ 2’’)
5,520 (18’ 1’’)
B’
Max. digging depth
(8’ level)
5,100 (16’ 9’’)
5,410 (17’ 9’’)
C
Max. vertical wall
digging depth
4,400 (14’ 5’’)
4,740 (15’ 7’’)
D
Max. digging height
9,610 (31’ 6’’)
9,860 (32’ 4’’)
E
Max. dumping height
6,900 (22’ 8’’)
7,140 (23’ 5’’)
F
Min. front swing radius
3,380 (11’ 1’’)
3,130 (10’ 3’’)
B B' C
17
4
LIFTING CAPACITY
Rating over-front
Rating over-side or 360 degrees
HW160 MONO-BOOM
5.0 m (16’ 5’’) Mono-boom; 2.20 m (7’ 3’’) arm equipped with 0.70 m3 (SAE heaped) bucket and dozer blade down.
Load point
height
m (ft)
7.5 m
(25 ft)
6.0 m
(20 ft)
4.5 m
(15 ft)
3.0 m
(10 ft)
1.5 m
(5 ft)
Ground
Line
-1.5 m
(-5 ft)
-3.0 m
(-10 ft)
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
Load radius
1.5 m (5 ft)
3.0 m (10 ft)
4.5 m (15 ft)
At max. reach
Capacity
6.0 m (20 ft)
Reach
m (ft)
*7150
*15760
*10980
*24210
*7150
*15760
*10980
*24210
*7510
*16560
*10060
*22180
*8310
*18320
*7510
*16560
7610
16780
7790
17170
*4220
*9300
*5340
*11770
*6410
*14130
*6920
*15260
*6740
*14860
*5700
*12570
*4220
*9300
4530
9990
4200
9260
4010
8840
3960
8730
4050
8930
*2480
*5470
*3740
*8250
*4200
*9260
*4690
*10340
*4960
*10930
*4800
*10580
*2480
*5470
3000
6610
2860
6310
2710
5970
2600
5730
2580
5690
*3360
*7410
*3300
*7280
*3340
*7360
*3420
*7540
*3510
*7740
*3590
*7910
*3610
*7960
*3330
*7340
*3360
*7410
2350
5180
1910
4210
1710
3770
1670
3680
1770
3900
2080
4590
2920
6440
5.71
(18.7)
7.01
(23.0)
7.73
(25.4)
8.07
(26.5)
8.07
(26.5)
7.75
(25.4)
7.04
(23.1)
5.78
(19.0)
5.0 m (16’ 5’’) Mono-boom; 2.50 m (8’ 2’’) arm equipped with 0.70 m3 (SAE heaped) bucket and dozer blade down.
Load point
height
m (ft)
7.5 m
(25 ft)
6.0 m
(20 ft)
4.5 m
(15 ft)
3.0 m
(10 ft)
1.5 m
(5 ft)
Ground
Line
-1.5 m
(-5 ft)
-3.0 m
(-10 ft)
-4.5 m
(-15 ft)
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
1.5 m (5 ft)
3.0 m (10 ft)
Load radius
4.5 m (15 ft)
7.5 m (25 ft)
At max. reach
Capacity
Reach
m (ft)
*6610
*14570
*9600
*21160
*6610
*14570
*9600
*21160
*7720
*17020
*7170
*15810
*7640
*16840
*10310
*22730
*8780
*19360
*5610
*12370
*7720
*17020
*7170
*15810
7490
16510
7490
16510
7640
16840
*5610
*12370
*5010
*11050
*6160
*13580
*6800
*14990
*6770
*14930
*5950
*13120
4560
10050
4190
9240
3970
8750
3900
8600
3950
8710
1. Lifting capacity are based on SAE J1097 and ISO 10567.
2. Lifting capacity of the ROBEX series does not exceed 75% of tipping load with
the machine on firm, level ground or 87% of full hydraulic capacity.
18
6.0 m (20 ft)
*2460
*5420
*3510
*7740
*3990
*8800
*4530
*9990
*4880
*10760
*4830
*10650
*2460
*5420
3010
6640
2860
6310
2690
5930
2570
5670
2520
5560
*1820
*4010
*2380
*5250
*1820
*4010
1850
4080
*3140
*6920
*2870
*6330
*2800
*6170
*2860
*6310
*3040
*6700
*3380
*7450
*3440
*7580
*3270
*7210
3030
6680
2150
4740
1770
3900
1590
3510
1540
3400
1630
3590
1890
4170
2560
5640
6.15
(20.2)
7.35
(24.1)
8.04
(26.4)
8.36
(27.4)
8.37
(27.5)
8.06
(26.4)
7.38
(24.2)
6.20
(20.3)
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
5
LIFTING CAPACITY
Rating over-front
Rating over-side or 360 degrees
HW160 2-PIECE BOOM
5.1 m (16’ 9’’) 2-piece boom; 2.20 m (7’ 3’’) arm equipped with 0.70 m3 (SAE heaped) bucket and dozer blade down.
Load point
height
m (ft)
7.5 m
(25 ft)
6.0 m
(20 ft)
4.5 m
(15 ft)
3.0 m
(10 ft)
1.5 m
(5 ft)
Ground
Line
-1.5 m
(-5 ft)
-3.0 m
(-10 ft)
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
Load radius
3.0 m (10 ft)
4.5 m (15 ft)
6.0 m (20 ft)
7.5 m (25 ft)
At max. reach
Capacity
Reach
m (ft)
*9980
*22000
8290
18280
*3510
*7740
*3410
*7520
*4060
*8950
*5170
*11400
*6260
*13800
*6840
*15080
*6780
*14950
*5920
*13050
*3510
*7740
*3410
*7520
*4060
*8950
4880
10760
4540
10010
4370
9630
4330
9550
4430
9770
*3290
*7250
*3570
*7870
*4040
*8910
*4560
*10050
*4900
*10800
*4850
*10690
*3290
*7250
3250
7170
3110
6860
2960
6530
2860
6310
2830
6240
*2940
*6480
2060
4540
*3250
*7170
*3180
*7010
*3210
*7080
*3290
*7250
*3390
*7470
*3490
*7690
*3510
*7740
*3250
*7170
2420
5340
2000
4410
1820
4010
1780
3920
1890
4170
2210
4870
5.97
(19.6)
7.21
(23.7)
7.91
(26.0)
8.24
(27.0)
8.25
(27.1)
7.93
(26.0)
7.25
(23.8)
5.1 m (16’ 9’’) 2-piece boom; 2.50 m (8’ 6’’) arm equipped with 0.70 m3 (SAE heaped) bucket and dozer blade down.
Load point
height
m (ft)
7.5 m
(25 ft)
6.0 m
(20 ft)
4.5 m
(15 ft)
3.0 m
(10 ft)
1.5 m
(5 ft)
Ground
Line
-1.5 m
(-5 ft)
-3.0 m
(-10 ft)
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
Load radius
3.0 m (10 ft)
4.5 m (15 ft)
6.0 m (20 ft)
7.5 m (25 ft)
At max. reach
Capacity
Reach
m (ft)
*7590
*16730
*7590
*16730
*6440
*14200
*9290
*20480
*6440
*14200
8160
17990
*3730
*8220
*4850
*10690
*6000
*13230
*6700
*14770
*6780
*14950
*6130
*13510
*3730
*8220
*4850
*10690
4540
10010
4330
9550
4260
9390
4330
9550
*2940
*6480
*3350
*7390
*3840
*8470
*4390
*9680
*4790
*10560
*4850
*10690
*4170
*9190
1. Lifting capacity are based on SAE J1097 and ISO 10567.
2. Lifting capacity of the ROBEX series does not exceed 75% of tipping load with
the machine on firm, level ground or 87% of full hydraulic capacity.
*2940
*6480
3270
7210
3110
6860
2940
6480
2820
6220
2780
6130
2850
6280
*2640
*5820
*3260
*7190
*2740
*6040
2120
4670
2050
4520
2000
4410
*3050
*6720
*2900
*6390
*2790
*6150
*2800
*6170
*2920
*6440
*3180
*7010
*3340
*7360
3030
6680
2220
4890
1860
4100
1690
3730
1650
3640
1740
3840
2010
4430
6.40
(21.0)
7.56
(24.8)
8.23
(27.0)
8.54
(28.0)
8.55
(28.1)
8.25
(27.1)
7.59
(24.9)
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
19
6
ENGINE
Cummins QSB 6.7 engine
HYDRAULIC SYSTEM
Intelligent Power Control (IPC)
3-power mode, 2-work mode, user mode
Variable Power Control
Pump Flow Control
Attachment Mode Flow Control
Engine Auto Idle
Engine Auto Shutdown Control
Electronic Fan Control
CABIN & INTERIOR
ISO Standard cabin
Rise-up type windshield wiper
Radio / USB player
Handsfree mobile phone system with USB
12 volt power outlet (24V DC to 12V DC converter)
Electric horn
All-weather steel cab with 360° visibility
Safety glass windows
Sliding fold-in front window
Sliding side window (LH)
Lockable door
Hot & cool box
Storage compartment & Ashtray
Transparent cabin roof-cover
Sun visor
Door and cab locks, one key
Mechanical suspension seat with heater
Pilot-operated slidable joystick
Console box height adjust system
Automatic climate control
Air conditioner & heater
Defroster
Starting Aid (air grid heater) for cold weather
Centralized monitoring
8’’ LCD display
Engine speed or Trip meter/Accel.
Engine coolant temperature gauge
Max power
Low speed/High speed
Auto idle
Overload
Check Engine
Air cleaner clogging
Indicators
ECO Gauges
Fuel level gauge
Hyd. oil temperature gauge
Fuel warmer
Warnings
Communication error
Low battery
Clock
Cabin lights
Cabin front window rain guard
Cabin roof-steel cover
Seat
Adjustable air suspension seat with heater
Cabin FOPS/FOG (ISO/DIS 10262) Level 2
FOPS (Falling Object Protective Structure) · ISO 3449 Level 2
FOG (Falling Object Guard)
Cabin ROPS (ISO 12117-2)
ROPS (Roll Over Protective Structure)
STD OPT
SAFETY
STD
STD OPT
Battery master switch
Rearview camera
AAVM (Advanced Around View Monitoring)
Four front working lights
Travel alarm
Rear work lamp
Beacon lamp
Automatic swing brake
Boom holding system
Arm holding system
Safety lock valve for boom cylinder with overload warning device
Safety lock valve for arm cylinder
Swing Lock System
Four outside rearview mirrors
OTHER
Booms
5.0 m; 16’ 5’’ Mono
5.1 m; 16’ 95’’ 2-Piece
Arms
2.2 m; 7’ 3’’
2.5 m; 8’ 2’’
Removable clean-out dust net for cooler
Removable reservoir tank
Fuel pre-filter
Fuel warmer
Self-diagnostics system
Hi-mate (Remote Management System)
Batteries (2 × 12 V × 100 Ah)
Fuel filler pump (50 ℓ/min)
Single-acting piping kit (breaker, etc.)
Double-acting piping kit (clamshell, etc.)
Rotating Piping Kit
Quick coupler piping
Quick coupler
Accumulator for lowering work equipment
Pattern change valve (2 patterns)
Fine Swing Control System
Tool kit
Auto cruiser system
Travel pedal (2-way)
Single
Dual
Mobile
Satellite
Dual
UNDERCARRIAGE
Rear-dozer blade
Front outrigger and rear blade
Front and rear outrigger
Front blade and rear outrigger
Tires-dual (10.00-20-14PR tube)
Tires-dual (10.00-20 solid)
Fenders (Mudguards)
STD = Standard
OPT = Optional
* Standard and optional equipment may vary. Contact your Hyundai dealer for more information.
The machine may vary according to International standards.
* The photos may include attachments and optional equipment that are not available in your area.
* Materials and specifications are subject to change without advance notice.
* All imperial measurements rounded off to the nearest pound or inch.
PLEASE CONTACT
www.hyundai.eu
EN - 2016.08 Rev 0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement