View the product specification
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Lamp Striation Control
Normal Ballast Factor
Q HE T8 ISN
High Efficiency Series
Lamp / Ballast Guide
32W T8 - OCTRON® lamps
QHE ISN SC Models
1-lamp QHE1x32T8/UNV
2-lamp QHE2x32T8/UNV
3-lamp QHE3x32T8/UNV
4-lamp QHE4x32T8/UNV
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS (30W),
FBO29/SS (29W), FO28/SS (28W) & FO25/SS (25W)
FO40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L
ballast; 3 lamps on 4L ballast
Key System Features
• H
igh Efficiency Systems over
90% efficient
•NEMA Premium Electronic Ballast
Program compliant
•Lamp Striation Control (LSC)
•Over 100 LPW (lumens/watt) with
OCTRON SUPERSAVER® lamps
•Lowest power T8 I.S. Systems
•Universal voltage (120-277V)
•Small Can enclosure size
•30-50% Energy savings
•Min. Starting Temp:
• -20°F(-29°C) for T8 lamps
• 60°F (16°C) for Energy Saving
T8 lamps
• 0°F (-18°C) for FO40T8 lamps
•<10% THD
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder and manufacturing
process
Application Information
SYLVANIA QUICKTRONIC
High Efficiency ballasts
are ideally suited for:
•Any applications where the lowest
power T8 systems are needed for
maximum energy savings
•Energy Retrofits
•Commercial & Retail
•Hospitality & Institutional
•New Construction
Lamp Striation Control (LSC)
•General lighting applications where
energy saving T8 lamps may striate,
particularly for the F25 energy saving
T8 lamps.
ECS203R1 - 8/2011
SYLVANIA QUICKTRONIC High Efficiency,
(QHE) energy-saving electronic T8 ballasts
offer several advantages:
1. Same Light, Less Power!
• Up to 6% in energy savings compared
to standard T8 low power electronic
ballasts without compromising light
output
• 3 0-44% energy savings when compared
to F40T12 magnetically ballasted
systems (see table below)
2. Parallel Circuitry: keeps remaining lamps
lit if one or more go out.
3. Lamp Striation Control (LSC): T8 energy
saving lamps should be operated above
60°F, but under certain conditions the
lamps may striate. LSC circuitry may
minimize or eliminate this condition;
however there are limited applications
where LSC circuitry may not entirely
mitigate lamp striations
4. NEMA Premium Electronic Ballast
Program compliant. The program
promotes the use of high efficiency
T8 electronic ballasts by meeting or
exceeding the Ballast Efficiency Factors,
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
(BEF) established by the CEE, (Consortium
for Energy Efficiency). For additional
information on this program go to:
www.cee1.org or www.nema.org
5. New Banded Packaging
•D
istributor-friendly for easy stocking
and individual ballast sales
•R
educed waste
• E asy removable bands
•N
o tangled wires
These ballasts are also RoHS compliant and
feature lead-free solder and manufacturing
process.
SYLVANIA QUICKTRONIC High Efficiency
(QHE) systems are also covered by the
QUICK 60+® warranty, the first and most
comprehensive lamp & ballast system
warranty in the industry.
Relative
Input Initial System Mean Mean
System Type
Power System Efficacy System Light Energy
(2-lamp)
(W) Lumens LPW LumensOutputSavings
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
F40T12 - E .S. Magnetic Ballast
86
5795
67
4930
F34T12 - E.S. Magnetic Ballast
72
4660
65
3960
80%
16%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
FO32/XP - QHE2x32T8/UNV ISN-SC
FO28/SS - QHE2x32T8/UNV ISN-SC
55
48
5280
4800
96
100
4965
4510
101%
91%
36%
44%
% Relative Light Output (Mean Lumens)
• Very low harmonic distortion (<10%)THD
• Operate at >42kHz to reduce potential
interference with infrared control systems
A complete OSRAM SYLVANIA System
Performance Guide showing performance
characteristics for all combinations of lamps
and ballasts is available upon request.
Baseline Baseline
% System Wattage (Power)
100%
100% 100%
101%
91%
90%
80%
36%
Energy
Savings
70%
64%
60%
44%
Energy
Savings
56%
50%
40%
2-F40T12
E.S. Magnetic Ballast
2-FO32/XP/ECO
QHE 2x32 UNV ISN
2-FO28/SUPERSAVER
QHE 2x32 UNV ISN
Catalog #
Date
Project
Prepared by
High Efficiency
Comments
Item
OSRAM SYLVANIA
Number
Description
Input
Current
Lamp
(AMPS)
Type
QHE 1X32T8/UNV ISN-SC Banded Pack
4985110-Pack
49969
QHE 2X32T8/UNV ISN-SC Banded Pack
4985310-Pack
49970
QHE 3X32T8/UNV ISN-SC Banded Pack
4985510-Pack
49971
QHE 4X32T8/UNV ISN-SC Banded Pack
4985710-Pack
Rated Ballast InputSystem
Lumens No. of Factor System
Mean Power Efficacy
(lm)
Lamps
(BF)
Lumens Lumens (W)
(lm/W) BEF 1
0.25/0.11 FO32/7002800
0.25/0.11
FO32/XP 3000
0.22/0.09
FO30/SS 2850
0.21/0.09 FO28/SS 2725
0.19/0.09
FO25/SS 2475
1
1
1
1
1
0.88
0.88
0.88
0.88
0.88
2465
2640
2510
2400
2175
2220
2480
2360
2255
2045
28
28
26
25
22
88
94
97
96
99
3.14
3.14
3.38
3.52
4.00
0.47/0.20 0.47/0.20 0.44/0.19
0.40/0.18 0.36/0.16
2
2
2
2
2
0.88
0.88
0.88
0.88
0.88
4930
5280
5015
4800
4355
4435
4965
4715
4510
4095
55
55
52
48
43
90
96
96
100
101
1.60
1.60
1.69
1.83
2.05
FO32/700
FO32/XP FO30/SS FO28/SS FO25/SS 2800
3000
2850
2725
2475
0.69/0.30 0.69/0.30 0.66/0.28 0.61/0.26
0.55/0.23
FO32/700
FO32/XP FO30/SS FO28/SS FO25/SS 2800
3000
2850
2725
2475
3
3
3
3
3
0.88
0.88
0.88
0.88
0.88
7390
7920
7525
7195
6530
6650
7445
7075
6760
6140
83/82
89/90
83/82 95/97 78/77 96/98 72
100
65/64 101/102
1.07
1.07
1.14
1.22
1.38
0.91/0.39 0.91/0.39 0.86/0.37
0.80/0.35 0.71/0.30
FO32/700
FO32/XP FO30/SS FO28/SS FO25/SS 2800
3000
2850
2725
2475
4
4
4
4
4
0.88
0.88
0.88
0.88
0.88
9855
10560
10030
9590
8710
8870
9925
9430
9015
8190
108/107 91/92
108/107 98/99 102/101 98/99 95
101
85
102
0.82
0.82
0.87
0.93
1.04
Banded Pack, (add “-B” to Description). Banded Pack and 10-Pack contain 10 pieces each.
1: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Black/White
White
Blue
Blue
Black/White
BALLAST
White
Blue
BALLAST
LAMP
LAMP
LAMP
LAMP
plication, cap any blue lead.
to 600 volts.
Black
White
Red
Blue
Data based on F32T8
Black
Black
BALLAST
White
White
Red
Red
Starting Method: Instant Start
Ballast Factor: 0.88
Circuit Type: Parallel
Lamp Frequency: >40kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
Blue
Blue
Blue line (108-305V)
Blue
rated
Blue
BALLAST
Blue
BALLAST
LAMP
LAMP cap any blue lead.
Note: For two lamp application,
LAMP
lamp
application,
cap
any
two
blue leads.
Note:For
Forone
three
lamp
application,
cap
any
unused
blue lead.
Note:
For cap
three
lamp
cap any unused blue lead.
Insulate
to
600
volts.
For two lamp application,
two
blueapplication,
leads individually.
For
two
lamp
application,
For one lamp application,
cap two blue
leads,cap
onetwo
redblue
and leads individually.
QUICKTRONIC
3x32
Forindividually.
one lamp application,
cap volts.
two blue leads, one red and
one yellow lead
Insulate to 600
one yellow lead individually. Insulate to 600 volts.
Product Weight:
1.6 lbs each (approx)
Black
Blue
Black Blue
White LAMP
BALLAST
White
Red
YellowBALLAST
Red
RedRed
BALLAST
BALLAST
QT-FMapplication,
green ground wire
to terminal
required. blue lead.
Note: For Note:
threeForlamp
cap
any unused
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
Blue
Blue
BALLAS
Blue
3 Complies with European Union Restriction
of Hazardous Substances Directive (Directive
EC 2002/95)
Black
White
Red
Black Blue
Blue
BlackBlue
Blue
BALLAST
White
Blue
White BALLAST
BALLAST
Red
Blue
Black Blue
BALLAST
White Blue
Black BALLAST
Red
White
Blue Life / Warranty
System
Blue
Red
Red
Red
White
Black
BALLAST
White
are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
LAMP
LAMP
BALLAS
Length
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Blue
BALLAST
Red
Blue
White
Black
BALLAST
Black
WhiteLamp Wattage
Primary
White
BALLAST
Red
Yellow
Yellow
Yellow
the system solution, See the World in a New Light, OCTRON, XP, SUPERSAVER and QUICK60+ are registered trademarks of OSRAM SYLVANIA Inc.
Yellow
SYLVANIA,
QUICKTRONIC is a registered trademark of OSRAM GmbH.
Black
White
Red
Blue
Blue
QUICKTRONIC
BALLAST products
Blue
OSRAM SYLVANIA
National Customer
QUICKTRONIC 2x40DL
QUICKTRONIC 1x40DL
Service and Sales Center
QUICKTRONIC 2x40DL
QUICKTRONIC 3x40DL
QUICKTRONIC 1x40DL
QUICKTRONIC 2x40DL
QUICKTRONIC 3x40DL
QUICKTRONIC 1x40DL
1-800-LIGHTBULB
Case Size
Item Number
49970 QHE 3 x 32T8 / UNV ISN - SC
(1-800-544-4828)
Black
Blue
Starting/Ballast Factor
QUICKTRONIC High
Efficiency
Blue
Blue
White
Black
Blue
www.sylvania.com Black
BALLAST
Blue
Line Voltage (120-277V) Blue
Number of Lamps
Black Blue
Red
QUICKTRONIC F
Note: For QT-FM green ground w
Note: For QT-FM green ground wire to terminal required.
Mounting
Length
8.70 mm
Wiring:
QUICKTRONIC FM (2 Slot
LAMP)
NIC FM (1 LAMP)
Note: For QT-FM green ground wire to terminal required.
Leads only
ground wire to terminal required.
Width
(no connectors provided)
LAMP
QUICKTRONIC 4x32
Black
White
Red
Height
LAMP
Red
Blue
Blue
Black
White
Red
LAMP
QUICKTRONIC 4x32
QUICKTRONIC 4x32
Dimensions:
BALLAST
Overall: 9.5" L x 1.68" W x 1.18" H
Mounting: 8.90"
Blue
Blue
Blue
Blue
Black
White
Red
Specifications
YellowRed
LAMP
Red
LAMP
RedLAMP
2 Operation below
50°F (10°C) may affect light
Red
LAMP
Red
LAMP
output or FM
lamp(1
operation
QUICKTRONIC
LAMP)– see “Low Temp.
LAMP
green
ground wire
to terminal required.
QUICKTRONICNote:
FMFor(2QT-FM
LAMP)
QUICKTRONIC FM (1 LAMP)
Starting”
definition.
QUICKTRONIC
wire to terminal required.FM (2 LAMP)
QUICKTRONIC
Note: For QT-FM green ground
wire to terminal required.FM (1 LAMP) Note: For QT-FM green ground
LAMP
White
Green
Black
AST
Blue
Black/White
Black
Blue
BALLAST
White
White
QHE Instant Start ballasts will operate F17,
F25 and F32 (and the SUPERSAVER® &
U-Bend equivalent) T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Electronic Ballast Catalog.
UL Listed Class P, Type 1 Outdoor
CSA Certified
LAMP
LAMP
Red
70°C
Max Case Temperature
LAMP
LAMP
LAMP
LAMP
LAMP
FCC 47CFR Part 18 Non-Consumer
LAMP
LAMP
LAMP
LAMP
LAMP
Class A Sound Rating
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Note: For two lamp applicat
Note: For one lamp
application,
cap 3any blue lead.
RoHS
Compliant
any blue
lead.volts.
Note: For one lamp application,QUICKTRONIC
cap any blue lead. 1x32 Note: For two lamp application, cap
For one lamp application, ca
Insulate
to 600
Note: Forcap
twoany
lamp
application,
cap any
blue lead.Ballast
Note:to
For
one
lamp application, cap any blueFor
lead.
NEMA
Premium
Electronic
QUICKTRONIC 1x32
one lamp application,
two
blue leads.
Insulate
600
volts.
Insulate to 60
QUICKTRONIC 1x32
For one
lamp
application, cap any 2x32
two blue leads.
QUICKTRONIC
Insulate to 600 volts.
Insulate
to 600
volts.
Program
QUICKTRON
QUICKTRONIC 2x32
Insulate
to 600compliant
volts.
QUICKTRONIC 2x32
QUICKTRONIC 3x32
ANSI C62.413x32
Cat. A Transient Protection
QUICKTRONIC
GFCI compatible
Black
Blue
Black
Blue
White
Blue
White
Emergency ballast compatible
White
Black
Blue
Green
BALLAST
White
Blue
White
Green
BALLAST
BALLAST
White
Black
Blue
White
Blue
White
Yellow
Red
Black
Green
Remote
Mounting
(Max.
wire
length
from
Black
BALLAST
Green
White
BALLAST
BALLAST
Green
Black
BALLAST
Blue
Yellow
Red
Green
Black
BALLAST
BALLAST
White
Yellow
Red
BALLAST
Black
Yellow
Red
ballast case to lampholder):
Black
Blue
Yellow
Red
Red
Yellow
Red
• 20 ft: full wattage T8s
LAMP
Blue
LAMP
Blue • 10 ft: energy saving T8s
LAMP
Blue
Blue
LAMP
LAMP
Blue
LAMP
LAMP
Yellow• 4 ft: 25W energy saving T8s
LAMP
Red
RONIC 2x32
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with
other lamp manufacturers equivalent lamp
types that meet ANSI specifications.
©2011 OSRAM SYLVANIA
49968
LAMP
ALLAST
Performance Guide
High Efficiency Universal Voltage (120-277V), Lamp Striation Control
LAMP
MP
T8 Instant Start
Type
Q HE T8 ISN
LLAST
Normal Ballast Factor
SPECIFICATION DATA
Blue
Red
Blue
Red
BALLAST
Red
LAMP
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 2x59*
QUICKTRONIC 2x59*
LAMP
LAMP
Note: For two lamp application, cap
QUICKTRONIC
White
Blue
BALLAST
Yellow
Blue Specifications subject to change
without notice.
Yellow
Red
Red
Blue
Blue
Red
Red
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
LAMP 2x59*
QUICKTRONIC
LAMP
QUICKTRONIC 2x96IS
LAMP
QUICKTRONIC 2x96HO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement