S21 Dimmer Strip - Strand Lighting

S21 Dimmer Strip - Strand Lighting
S21 Dimmer Strip
Strand Distributed Dimming
Dimmer Strips
Strand Lighting is pleased to introduce the next generation of S21
Dimmer Strips; a perfect extension of our R21, C21, and A21 range of
permanently installed dimmer systems. Systems can be mixed and
matched as needed to create a completely flexible lighting system to meet
the needs of any installation. Our dimmer strips feature quiet convection
cooled IGBT dimming for low lamp noise and reliable operation.
IGBT dimmers are an Insulated Gate Bipolar Transistor power device that
works in tandem with a dedicated microprocessor to control almost any
type of lighting load required. IGBT dimmers are completely silicon-based
and operate silently without the use of chokes, and do not produce any
mechanical buzz or hum associated with Silicon Controlled Rectifier (SCR)
dimmers. They are smaller, lighter, and generate fewer neutral harmonics
than SCR dimmers.
Ideal for smaller systems, S21 Dimmer Strips may be used in schools,
churches or any facility that does not have space for conventional dimmer
racks. Easy to install and use, S21 Dimmer Strips can be fed from
standard breaker panels.
S21 Dimmer Strip
(Connector variations shown for
illustrative purposes only)
Features
●
Fully Digital Dimmer strip with Forward and Reverse phase
dimming (automatic or user-selectable)
●
Compatible with new LED luminaires that require reverse
phase operation
•
DMX512 I/O
•
Quiet convection cooled dual IGBT dimmers
•
No dimmer room required and no added cooling needed
•
Energy efficient – only a 2.5 volt insertion loss
•
Dimmer strip features 6 dimmers packaged in three dual
modules
•
Solid-state dimming technology with adjustable transition
(rise) time up to 1000 ms for quiet operation
•
Low HarmTM mode to reduce neutral harmonics
●
Automatic Overload and Short Circuit protection
•
Choice of 3 power input locations - top, bottom and back
•
Wide range of load connector options
•
Local Focus buttons and LED status indicators
•
Simple set up with back lit LCD display and easy button
access. LCD blacks out when not in use
●
Compact size for easy installation
•
Integrates with Strand R21, C21, and A21 Dimmers
•
Hangers available for wall and pipe mount applications
•
Available in 120V (S21) or 230V (eS21) models
•
ETL Listed (120V models) and CE Marked (230V models)
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
S21 Dimmer Strip
Strand Distributed Dimming
S21 Dimmer Strip Components & Features
LCD Display and Menu System
The Processor’s LCD Display and Menu System provides local control
for accessing all system status information and for making configuration
changes to the particular dimmer strip. User-defined operational
selections and dimmer strip status includes:
●
Dimmer strip DMX512 addressing
●
Dimmer strip and individual dimmer status reporting (including
dimmer levels, connected loads, operational modes, error
reporting, dimmer operating temperatures, voltages, and more)
•
Dimming mode selections (per dimmer) for Forward Phase
Control, Reverse Phase Control, dedicated line-voltage LED
dimming, and non-dim
•
Adjust dimmer transition times to optimize performance. Auto
mode is available to insure the best performance under all
conditions.
•
Operational voltage selections (per dimmer) to prolong lamp life
•
A selection of 13 different dimming curves - each dimmer can
be set to its own dimming curve as desired
•
Optional password protection to lock menu (to prevent
unwanted changes)
LCD Display & Menu
LCD Display & Menu Detail
Escape
MAIN MENU
Dimmer
System
Dimmer
Dimmer
System
Start Address
Status
Status
Options
Configuration
Enter
Dual, IGBT Dimmer Modules
Each S21 Dimmer Module contains one dual 2.4kW IGBT dimmer with
power (2.4kW) shared between the two dimmers within the module.
Each dual dimmer module includes:
•
Two Focus/LED Indicator buttons, that function as both focus
adjustment control and visual status indicator for its dimmer
•
No cooling fans, each dimmer module contains its own heatsink
for convection cooling
•
A selection of three load connector options - Edison (NEMA 520R), twistlock, or stagepin
•
Can handle the following load types - incandescent, fluorescent
(non-dim and Advance Mark 10 dimmable ballasts), inductive,
line-voltage LED, magnetic and electronic low-voltage, neon,
cold-cathode
•
Dimmer modules contain no magnetic chokes and produce no
mechanical noise, operating with an 1000ms transition time in
either Reverse Phase Control (RPC) or Forward Phase Control
(FPC) ensuring quiet lamp operation regardless of lamp type or
size
Dual 2.4 kW IGBT
Dimmer Module
Dual Dimmer Module Detail
Dimmer
Heatsink
Focus Button / LED Status
Indicator (one for each side)
S21 Dimmer Strip
Strand Distributed Dimming
S21 Dimmer Strip Mounting Hardware
Pipe Mount Bracket (71725)
Wall Mount Bracket (71727)
"C" Style Clamp or Cheeseboro
Clamp mounting hole
Wall Mount Holes
Dimmer strip
mounting holes
The 71725 Pipe Mount Bracket is
designed to mount to a S21 Dimmer
Strip and to allow installation of “C”
Style Mounting Clamps (SC) or
71351 Cheeseboro Clamps (each
sold separately) for truss or pipe
hanging applications. Note, two Pipe
Mount Brackets are required to
mount an S21 Dimmer Strip.
Single Pipe Mount
Hanging Bracket (71730)
Dimmer strip
mounting holes
The 71727 Wall Mount Bracket is
used to permanently mount the S21
Dimmer Strip to a wall. Note, two
wall Mount Brackets are required to
mount a S21 Dimmer Strip.
Wall Mount Holes
Double Pipe Mount
Hanging Bracket (71731)
Rigging (mounting)
point for bracket
Rigging (mounting)
point for bracket
U-Bolt clamp for
mounting a pipe
(above strip)
Dimmer strip
mounting holes
U-Bolt clamp for
mounting a single pipe
The 71730 Single Pipe Mount
Hanging Bracket is designed to
mount to a S21 Dimmer Strip and to
allow a single 1-1/2" (Schedule 40)
pipe to be hung underneath. Note, At
least two Pipe Mount Brackets are
required to mount a S21 Dimmer
Strip (or as required by code).
"C" Style Clamp (SC)
Dimmer strip
mounting holes
U-Bolt clamp for
mounting a pipe
(below strip)
Dual Clamp Mount
Hanging Bracket (71510)
The SC “C” Style Mounting Clamp is used to
mount S21 Dimmer Strips beneath a 1½”
schedule 40 pipe or a 2” aluminum tube
(truss). Each “C” Style Clamp installs on a
71725 Pipe Mount bracket (sold separately)
and allows S21 Dimmer Strips to be quickly
relocated. Note, two “C” Style Clamps are
required to mount an S21 Dimmer Strip.
Cheeseboro clamp (71351)
for mounting to a single pipe
Dimmer strip
mounting holes
Cheeseboro Style Clamp (71351)
The 71351 Cheeseboro Style Mounting Clamp is
used to mount an S21 Dimmer Strip above
either a 1½” schedule 40 pipe or a 2”
aluminum tube (truss). Each Cheeseboro Clamp
installs on a 71725 Pipe Mount bracket (sold
separately) and allows S21 Dimmer Strips to be
quickly relocated. Note, two Cheeseboro Style
Mounting Clamps are required for each S21
Dimmer Strip.
The 71731 Double Pipe Mount
Hanging Bracket is designed to
mount to a S21 Dimmer Strip and to
allow two 1-1/2" (Schedule 40)
pipes to be hung underneath and
over the raceway. Note, At least two
Pipe Mount Brackets are required to
mount a S21 Dimmer Strip (or as
required by code).
Cheeseboro clamp (71351)
for mounting to a single pipe
3-3/16"
~ 2-0"
The 71510 Dual Clamp Mount
Hanging Bracket is supplied with two
71351 clamps and is designed to
mount to a S21 Dimmer Strip and to
allow a single 1-1/2" (Schedule 40)
pipe to be hung underneath. Note, At
least two Dual Clamp Mount
Brackets are required to mount a
S21 Dimmer Strip (or as required by
code).
S21 Dimmer Strip
Strand Distributed Dimming
Ordering Information
Cat No.
Description
Input Power Cables
S21 Dimmer Strips, 120 Volt
71500
71501
71502
3, Dual 2.4kW (max.) Dimmer Modules, 1000 ms
transition time, S21 Dimmer Strip with GP
(Grounded Stage Pin) connectors
3, Dual 2.4kW (max.) Dimmer Modules, 1000 ms
transition time, S21 Dimmer Strip with GTL
(Twistlock) connectors
3, Dual 2.4kW (max.) Dimmer Modules, 1000 ms
transition time, S21 Dimmer Strip with GR
(Edison, NEMA 5-20R) connectors
Notes:
(1)
Each S21 IGBT dual module contains two dimmers and is fully rated at 2.4kW per
module. The 2.4kW rating of the module may be split evenly across both dimmers at
1.2kW, used on a single dimmer at 2.4kW, or any combination of loads on either
dimmer that does not exceed 2.4kw per module.
(2)
S21 Dimmer Strips do not include optional input power cables which are available for
field installation.
S21 Dimmer Strip Accessories
71432
71436
71437
71438
Clamps / Mounting / Hangers / DMX Termination
SC
71351
71725
71510
Spare Modules
71700
71701
Spare 120V Dimmer Module
Spare Processor / LCD Display Unit
6 ft AWG #10/5 power input cable with L21-20P
GTL plug for field installation
6 ft AWG #10/5 power extension cable with L2120P GTL plugs
8 ft AWG #10/5 power extension cable with L2120P GTL plugs
12 ft AWG #10/5 power extension cable with
L21-20P GTL plugs
71727
71730
71731
71346
Pipe Clamp
Cheeseboro Clamp
Pipe Mount Bracket (for use with Cheeseboro or
Pipe Clamps)
Dual Clamp Mount Hanging Bracket (for use with
Cheeseboro or Pipe Clamps)
Wall Mount Bracket
Single Pipe Mount Hanging Bracket
Double Pipe Mount Hanging Bracket
DMX512 Terminator
Technical Information
Number of Dimmers:
Output Voltage:
3 Dual Dimmer Modules
100 / 110 / 115 / 120 VAC (user
selectable)
Minimum Load:
1 watt
Maximum Load / Dimmer: 2.4kW per Dimmer Module (max.)
Dimming Phase:
Forward or Reverse (user selectable
or automatic)
Transition (Rise) Time:
Up to 1000 ms (automatic
adjustable)
Insert Loss:
Max 2.5 volts
Power Feed:
3-phase 4 wire 120/208 volts 20
amps; Terminal block or optional
input power cables available
Frequency:
50/60Hz
Ambient Temperature:
0 to 40 degrees C
Humidity:
Cooling:
Height:
Depth:
Length:
Weight:
Load Connector Types:
(230V Models)
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: +1 (212) 213-8219
Fax: +1 (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
072312NA
www.strandlighting.com
© Philips Group 2012
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
5%-95% Non condensing
Natural Convection
6.0 in. (152.4 mm)
4.0 in. (101.6 mm)
72.0 in. (1,828.8 mm)
38.5 lbs (17.5 kg)
GP – Grounded Stage Pin
GTL – Twistlock
GR – Edison NEMA 5-20R
(120V Models)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement