Automatic Swing Gate Operators

Automatic Swing Gate Operators
Amico
Automatic Swing Gate Operators
Amico is the electromechanical operator for swing gates up to 7.2 ft per leaf. It’s new technology provides
advanced features that allow for total control of the operator and optimized functionality. In addition, the
impact force developed by the gate movement complies with current UL 325 and CSA C22.2 safety standard
regulations for both US and Canada.
A new concept in safety
Get ready for a guarantee of the highest reliability and safety standards, coupled with an
attractive and exclusive design. Amico is a safe, innovative operator, featuring elegant and
harmonious lines. This electromechanical operation provides an extra touch: its force is
encoder-controlled. Combined with the ZLJ24U control panel, it makes it possible to install
systems that are compliant with UL 325 US and CSA C22.2 Canada standards to control the
gate’s maximum impact forces.
The Amico offers many innovative
features, including:
Safety compliance
A dedicated panel, called the ENCODER,
constantly monitors the movement of
the gate leaves, promising the utmost in
thrust control and safety.
Personalized release
The lock cylinder on the release
device has a three-sided key that
can be personalized on request.
Plus, a reserved key cylinder for the
user guarantees even higher
security.
Simplified run adjustment
Once the mechanical end stops are
in place, the opening and closing
end stops are adjusted
automatically when the first test
movements are made. This setting is
final and needs no further
adjustment.
Eye-catching design
The aluminum supporting structure
makes Amico extremely robust.
Carefully design and attention to
detail provides both an exclusive
look and protection from
environmental damages.
Compliant with UL 325 STD
and CSA STD C22.2 No. 247
for both the US & Canada
No more blackouts!
Amico’s 24V D.C. technology
automatically detects any lack of power
and activates the emergency battery
back-up mode built into the assembly
(see accessory chart).
www.came-americas.com
Amico
Technical Features
Amico 24V D.C. can be matched to the ZLJ24U control panel with a single three-wire cable is sufficient to
connect the gearmotors.
The Advantages of Amico
5.94"
Dimensions
12.20"
28.74"
34.88"
3.42"
(inches)
2.3"
· Signal led
Built into the control board to provide easy diagnosis of the systems functions.
· End-point control
Operated through the encoder to easily manage movement and slow-down phases.
· Simplified installation
Installs easily with one, three-polar cable that handles the power supply and the lifts.
A
C max
The Amico 24V D.C. can be matched to the ZLJ24U control panel, featuring signal LED,
self-diagnosis and is compliant with UL 325 US standards concerning the maximum impact
forces generated by gate movement.
(inches)
A
B
C max
(in.)
(in.)
(in.)
90°
5.11
5.11
2.36
120°
5.11
4.33
1.96
Leaf opening
Amico has an electromechanical gear motor that is the culmination of all of CAME’s design
expertise and technology innovation; available in the traditional 24V D.C. version.
Technical features
Type
Protection rating
Power supply (V) (50/60Hz)
Motor power supply (V)
Current draw (A)
Power (HP)
90° opening time (s)
Duty cylce (%)
Thrust (N)
Operating temperature (°F)
001A1824U
IP44
120V A.C.
24V D.C.
4 max
1/4
Adjustable
Intensive use
400 - 2000
-4ºF up to 131ºF
24V D.C.
Limits to use
Model
Max width of gate leaf (ft.)
Max weight of gate leaf (lb.)
001A1824U
3
550
5
470
6
440
24V D.C.
Compliant with UL 325 STD
and CSA STD C22.2 No. 247
for both the US & Canada
24V D.C. gear motor powered directly
from the control panel.
www.came-americas.com
CAME Americas Automation
11345 NW 122nd Street
Medley, FL 33178
P: 305-433-3307
F: 305-396-3331
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement