instructions

instructions
Welcome!
SETTING UP YOUR DOSE DISPENSE
1
Remove the Dose Dispense from
the package. Decide where in your
home you would like to dispense
medications.
2
Plug your pillbox into a wall outlet with
the supplied USB cord.
Keep it plugged in when not traveling
to ensure the battery stays charged.
3
The on-screen guide will start
automatically. Follow the steps and you
will be dispensing pills in no time!
You'll need to use a slight amount of
pressure when touching the screen.
2
DISPENSING PILLS
To dispense pills, FLIP THE PILLBOX into a hand or cup.
If the pillbox is not flipped, that dose will be marked as
missed.
ŸŸ When it's time to dispense, the tray will rotate to reveal
the pills and a short sound will play. Simply
FLIP THE PILLBOX to dispense the pills
ŸŸ After 10 minutes, if not dispensed, a soft alarm will
begin playing
ŸŸ After 20 minutes, a loud alarm will play more
frequently
ŸŸ After 30 minutes, if connected to Dose Anywhere, text
or email reminders will be sent to linked accounts
ŸŸ If the pillbox is not flipped for 2 hours, the device will
close and the dose will be marked as missed
USING THE HOME MENU
The home menu will give you an overview of the state of
the Dose Dispense.
1.The STATUS BAR will let you know the current time
and the state of the alarm, WiFi connection and the
battery
2.The SCHEDULE will always display the next time pills
are scheduled to be taken and which compartment
will open
3.Press the ARROWS on the bottom of the touch screen
to shift between different menus
1
11:00am
SCHEDULE
A
8:00am
NEXT
B
2
12:00pm
3
3
ACCESSING SETTINGS MENUS
To access the device settings, UNSCREW THE LID, The
main settings screen will be displayed.
Use the ARROWS at the bottom of the touch screen to
navigate left and right through the screens shown below.
Many menu screens have a white ACTION BUTTON that
you can press to activate the feature.
To return to the home menu, simply REPLACE THE LID,
this can be done from any settings menu screen.
Unscrew the lid to access settings, replace
the lid to return to the home menu
PRESS the left and right ARROWS to cycle
through the various menus
4
PRESS the white ACTION BUTTON on the menu
when you want to change settings
Refill Early
Med Times
START
EDIT
REFILLING EARLY
Refill Early
START
The pillbox will automatically request a refill when
empty, but you can start a refill at any time from the
Refill Early menu.
ŸŸ UNSCREW THE LID
ŸŸ Press START on the Refill Early screen
ŸŸ Follow the on screen GUIDE
ŸŸ SCREW THE LID ON to complete the refill
CHANGING MEDICATION TIMES
Med Times
EDIT
You can change your medication dispense times from
the Med Times menu.
ŸŸ UNSCREW THE LID
ŸŸ Press the RIGHT ARROW ONCE
ŸŸ Press EDIT on the Med Times screen
ŸŸ Follow the on screen GUIDE
CONNECTING TO WiFi
WiFi Settings
EDIT
Connecting to WiFi allows you to use DOSE ANYWHERE,
our service that will send reminders when medications are
dispensed, missed or waiting to be taken.
ŸŸ UNSCREW THE LID
ŸŸ Press the RIGHT ARROW TWICE
ŸŸ Press EDIT on the WiFi Settings screen
ŸŸ If you already connected or have a saved connection, you
will see a status screen. Press the RIGHT ARROW
ŸŸ Press START on the New Connection screen
ŸŸ Follow the on screen instructions to connect
5
DEVICE SETTINGS
Pressing EDIT in the Device Settings screen brings up a new
menu carousel with various settings you can change for your
device as seen on the following pages.
Device Settings
EDIT
Press the left and right ARROWS to navigate between the menus.
Some menus have ON/OFF TOGGLE BUTTONS that allow you to
switch a feature ON or OFF like the alarm sound.
To close the device settings menu, press the X in the upper
right corner.
TOGGLE BUTTONS can be pressed on either
side to turn a setting on or off
Device Settings
6
To close the device settings carousel press the X
in the upper right corner
Device Settings
Alarm Sound
Alarm Sound
OFF
OFF
ON
ON
TURNING THE ALARM ON AND OFF
Device Settings
Alarm Sound
OFF
ON
The alarm is a very helpful method to remind the user to take their pills,
but sometimes it is useful to turn the alarm off.
ŸŸ UNSCREW THE LID
ŸŸ Press the RIGHT ARROW THREE TIMES to the Device Settings menu
ŸŸ Press EDIT on the Device Settings menu
ŸŸ Press the ON/OFF TOGGLE on the Alarm Sound menu to toggle the
alarm on and off
TURNING EARLY DISPENSE ON AND OFF
Device Settings
Early Dispense
OFF
ON
Occasionally you may need to leave the house and will end up missing
a time to take your pills, in this case it is useful to dispense the next
dose early.
ŸŸ UNSCREW THE LID
ŸŸ Press the RIGHT ARROW THREE TIMES to the Device Settings menu
ŸŸ Press EDIT on the Device Settings menu
ŸŸ Press the RIGHT ARROW ONCE to the Early Dispense menu
ŸŸ Press the ON/OFF TOGGLE to toggle the Early dispense on and off
11:00am
EARLY DISPENSE
TAKE NOW
DISPENSING EARLY
If Early Dispense is turned on, there will be a third screen in the home
menu carousel.
ŸŸ With the LID ON, press the RIGHT ARROW ONCE
ŸŸ Press TAKE NOW on the Early Dispense menu
ŸŸ The tray will rotate and reveal your pills
ŸŸ FLIP the pillbox to dispense
ŸŸ In order to prevent users from accidentally dispensing too many pills
early, after the Early Dispense feature is used it will not be available
again until after the scheduled dispense time has passed.
7
PAUSING THE PILLBOX
Device Settings
Pause Device
OFF
ON
Sometimes you will want to suspend taking medications.
You can do this by pausing the pillbox.
ŸŸ UNSCREW THE LID
ŸŸ Press the RIGHT ARROW THREE TIMES to the Device Settings menu
ŸŸ Press EDIT on the Device Settings menu
ŸŸ Press the RIGHT ARROW TWICE to the Pause Device menu
ŸŸ Press the ON/OFF TOGGLE to pause or unpause the device
Device Settings
Time
EDIT
CHANGING THE TIME
Sometimes the current time on the pillbox will need to be adjusted,
such as during Daylight Savings Time or when changing time zones.
ŸŸ UNSCREW THE LID
ŸŸ Press the RIGHT ARROW THREE TIMES to the Device Settings menu
ŸŸ Press EDIT on the Device Settings menu
ŸŸ Press the RIGHT ARROW THREE TIMES to the Time menu
ŸŸ Press the EDIT button
ŸŸ Follow the on screen instructions to set the time
Device Settings
Reset Device
RESET
FACTORY RESETTING THE PILLBOX
Resetting the pillbox to factory setting will erase all the current
medication schedules and delete the WiFi credentials. This can be
useful if changing the device to another user.
ŸŸ UNSCREW THE LID
ŸŸ Press the RIGHT ARROW THREE TIMES to the Device Settings menu
ŸŸ Press EDIT on the Device Settings menu
ŸŸ Press the RIGHT ARROW FOUR TIMES to the Reset Device menu
ŸŸ Press RESET
ŸŸ CONFIRM that you are sure you want to reset. Please note: this
cannot be undone
8
TRAVEL MODE
Travel Mode
Battery: 100%
If the pillbox is unplugged, the screen will dim and it will
enter into Travel Mode after 30 seconds. This is done to
save power until you can plug it in again. The pillbox will
still be able to dispense pills while in this mode.
ŸŸ When it is TIME TO DISPENSE in Travel Mode, the
screen will turn on and reveal a Pills Ready menu
ŸŸ Press the DISPENSE button
ŸŸ The tray will rotate to reveal the pills
ŸŸ FLIP to dispense
Pills Ready
ŸŸ The pillbox will close and the screen will turn off again
to save power
DISPENSE
WAKING FROM TRAVEL MODE
While in travel mode, the touch screen is turned off to
conserve power.
ŸŸ To wake the pillbox, simply PRESS THE SCREEN for
up to 5 seconds or REMOVE THE LID and wait for 10
seconds
ŸŸ The pillbox will sleep again once the lid is replaced
and after 30 seconds of inactivity
9
RESTARTING THE PILLBOX
If the device ever becomes unresponsive or seems to have frozen it
can usually be solved by restarting the pillbox.
ŸŸ UNSCREW THE LID
ŸŸ UNPLUG the USB cord
ŸŸ PRESS AND HOLD THE RECESSED BUTTON to the lower left of
the screen for 3 TO 4 SECONDS, the screen will turn off
ŸŸ PLUG IN the USB cord, the screen will turn on
SECURING THE PILLBOX
It can be useful to lock the device with the included screw. It will
prevent unwanted tampering or accidental opening.
ŸŸ With the LID ON
ŸŸ Place the small TORX SCREW (in the small bag accompanying
your device) in the hole above the screen
ŸŸ Turn the screw clockwise with the supplied TORX WRENCH
ŸŸ Place the wrench in a SECURE PLACE where it will not be lost or
leave it in the box for storage
PILLS NOT TAKEN DAILY
Every time you refill the tray, the A space will represent the first
medications of that CURRENT DAY. If you have a medication that
is only taken on a specific day, you can tell which day each space
represents by COUNTING AHEAD from the current day.
SATURDAY
ID
AM
PM
SU
PM
PM
AM
10
PM
ES
DA
Y
AM
WE
DN
ES
D
THUR
AM
PM
AY
M ONDAY
PM
SDAY
AM
AM
TU
FR
PM
AY
ND
AY
AM
In the example on the left, the device is being refilled on a
Wednesday, so space A and B are filled with Wednesday’s
medications. If a pill needs to be taken only on Friday morning,
simply count ahead to find the correct space.
QUESTIONS OR COMMENTS?
If you have any issues using your device we want to hear from you and help! If you would like to call
or email and leave a message with you name and a method to contact you, we will get back to you
as soon as possible. Our number one goal is making a product that meets all of your expectations!
Thank you for choosing Dose Health!
PHONE: (844) 300-6212
EMAIL: [email protected]
WEB INSTRUCTIONS: dosehealth.com/instructions
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement