FIRE ALARM PANEL
CAT.NO.
D -F-9006
FIRE ALARM PANEL
FEATURES
● Save-cost and save-space
● Available for 30, 40 and 50 fire alarm zones
● Conventional type
● Alarm verification type
● Name plate and a digital display for alarmed zones
● Programmable output signal
● Ni-Cd stand-by battery built in
● Telephone handset built in for maintenance
● Programmable function at site
● Automatic self-checking
● Various test functions for maintenance
● Surge arrester built in for power lines
DESCRIPTION
The FAP128N series fire alarm panel was developed to
provide a cost- and space-saving conventional fire alarm
panel together with more user-oriented functions.
The height of the panel comes to approximately 80% of
that of our last 40-zone fire alarm panel. The weight of the
panel is reduced by approximately 70% of that of our last
40-zone fire alarm panel.
The cabinet is made with steel sheet having a depth of
1.2 mm (Door panel) and 1.6 mm (Cabinet).
<Alarm inputs>
Conventional fire detectors and manual alarm boxes are
connected to alarm input circuits to give visual and
audible alarm at the panel and to actuate alarm bells.
The FAP128N series fire alarm panel has a line-up of 30,
40 and 50-alarm input circuits (zones). Each alarm circuit
has an alarm verification function.
<Auxiliary inputs>
Five auxiliary input signals can be connected to auxiliary
input circuits to be displayed it on the panel. They may be
used for non-alarm input signals.
<Signal outputs>
2 representative alarm signals are available.
20 voltage-free contacts are available for signal output.
A group of output signals for 2 Annunciator Panels
(FIP116N).
A group of signals for a Fire Pump Starting Relay Box
<Digital display>
The 2-digit digital indicator displays not only alarming
zones but also trouble which happened in the fire alarm
panel and in the system.
<Alarm bell activation>
There are 2 modes to activate alarm bells. One is to
actuate all alarm bells at the same time, called general
alarm. The other is to actuate a group of alarm bells
depending on the location of a fire, called localized alarm.
One pair of terminals is available for the general alarm.
The programmable 20 voltage-free contacts are used for
the localized alarm.
<Automatic self-checking>
The following are automatically monitored at all time.
・Detector circuits for continuity
・Connection of the battery and fuse blown-out
・Microcomputer chip and memory chips for abnormal
running
・Main fuses for blown-out
・Connectors and signal transmission circuits for
interruption of communication between PCBs
・Main circuit voltage for over limit and under limit
The alarm input circuits are automatically checked once a
week for normal operation.
<Programming>
The following are programmable for setting and canceling
with a template on the panel.
・Non used-alarm input circuits without putting dummy
loads
・Alarm verification function to alarm-input circuits
・Interlocking auxiliary input signals with an audible
alarm at the panel
・Interlocking alarm input signals with representative
alarm signals
・An audible alarm at the panel during main power off
・Interlocking alarm input signals with 20 voltage-free
contact outputs
<Fire protection-related device control>
FAP128N series fire alarm panel has only fire alarm
functions. FCS128N series fire alarm panel is available
not only for fire alarm functions but also control functions
for fire protection-related devices such as smoke vents,
fire extinguishing system etc.
Contact our distributor in your region for the details of FCS128N series.
●HEAD OFFICE:7-3, Kudan-Minami 4-chome, Chiyoda-ku, Tokyo 102-8277, Japan ●PHONE:
(81)3-3265-0231 ●FAX:
(81)3-3265-5348
FIRE ALARM PANEL FAP128N SERIES
CAT.NO. D
-F-9006
TYPICAL WIRING DIAGRAM
(T)
(A)
End-of-line resistor 10KΩ1/2W
Manual fire alarm box
Alarm signal lines (L)
Detector circuits : 30 Smoke detectors per circuit.
(Max.300/30 zones panel,400/40 zones panel,500/50 zones panel)
No limit for contact type heat detectors.
Common line (C)
Fire alarm bell
NUMBER of WIRES(BASIC)
Fire alarm bell
n−Alarm signal lines (L)
1−Common line (C) for every
7 circuits
1−Telephone line (T)
1−Response line (A)
2−Fire alarm bell lines (B)
2−Location lamp lines (PL)
Location lamp
(B)
(PL)
n+6 wires
Annunciator
220VAC
50/60Hz
Electromagnetics switch
Hydrant pump
starting
relay box
Fire alarm panel
Hydrant pump motor
Resistance of detector circuits :
Less than 50Ω/Loop
Terminals :
for use with φ0.8∼1.6mm wire
220VAC
SPECIFICATIONS
Model No.
TYPE
POWER SUPPLY
AUXILIARY POWER SUPPLY
CIRCUITS VOLTAGE
POWER CONSUMPTION
NOMINAL ALARM VERIFICATION TIME
MAXIMUM NUMBER OF APPARATUS TO BE
CONNECTED
AMBIENT TEMPERATURE
LOOP RESISTANCE OF ALARM INPUT CIRCUIT
END-OF-LINE RESISTOR
TERMINAL BLOCK
MATERIALS
(ENCLOSURE)
COLOR
DIMENSIONS
WEIGHT
FAP128N SERIES
Wall-mounting type
220VAC 50/60Hz
Ni-cd battery(24VDC, 0.9Ah or 1.2Ah(for 50L))
5, 24, 48VDC, 24VAC
Approx. 40VA for monitoring
Approx. 100VA for alarming
Thermal detector : 10sec., Smoke detector : 60sec.
Smoke detectors : 30/zone
(Max.300/30 zones panel,400/40 zones panel,500/50 zones panel)
Alarm bells : 45(24VDC, 10mA/bell)
Location Lamps : 18(30V, 2W/lamp) 52(24VDC, 21mA/lamp)
0 to 40℃, 20to85%(RH)
Less than 50Ω/loop
10kΩ, 1/2W
Insert type terminals suitable for solid conductors with a diameter of 0.8 to 1.6mm
Use pin type solderless contacts for stranded conductors.
Steel sheet
Nohmi yellow : Nearly to Munsell no. 2.5Y 9/1, semi-glare
700mm(H)
×530mm(W)
×125mm(D)
Approx. 22kg
ORDERING INFORMATION
30-zone fire alarm panel
FAP128N-B1-30L
40-zone fire alarm panel
FAP128N-B1-40L
50-zone fire alarm panel
FAP128N-B1-50L
30-zone fire alarm panel with protection device control function(20 zones only)
FCS128N-B2-30L
50-zone fire alarm panel with protection device control function(30 zones only)
FCS128N-B2-50L
● These
instructions do not purport to cover all the details or variations in the equipment described, nor provide for every possible contingency to be met in
connection with installation, operation and maintenance.
● Specifications are subject to change without notice. Contact Nohmi before relying on above specifications.
● Actual performance is based on proper application of the product by a qualified professional.
● Should further information be desired or should particular problems arise, which are not covered sufficiently for the purchaser's purposes, the matter should
be referred to Nohmi or a distributer in your region.
OFFICE : 7-3, Kudan Minami 4-chome,
Chiyoda-ku, Tokyo 102-8277, Japan
●PHONE :
(81)
3-3265-0231
●F A X :
(81)
3-3265-5348
●U R L : http://www.nohmi.co.jp/english/
●HEAD
100401D -F-9006YO2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement