BeveLED® USAI - USAI Lighting

BeveLED® USAI - USAI Lighting
®
BeveLED2.1
3110
PROJECT INFORMATION
PROJECT
DOWNLIGHT
DATE
TYPE
BeveLED 2.1 Recessed Downlight - BeveLED 2.1 is the most complete recessed LED downlight product family available from USAI Lighting,
now with more BeveLED trim finishes, LED classic white color temperatures, innovative housing styles, and dimming driver options than before.
With industry-leading performance, BeveLED 2.1 can provide a solution for any project - commercial, corporate and residential installations.
1” REGRESS DOWNLIGHT
DELIVERED PERFORMANCE
BeveLED 2.1
1” REGRESS
DOWNLIGHT
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Color Consistency
1" Regress
9 Watts
90+
80+ HIGH
CRI
CRI
100
74
1150 900
850
675
12 Watts
80+
CRI
93
1300
1125
90+
HIGH
CRI
73
1025
875
16 Watts
24 Watts
90+
90+
80+ HIGH 80+ HIGH
CRI
CRI
CRI
CRI
93
72
86
67
1725 1350 2400 1875
1475 1150 2050 1600
2-Step MacAdam Ellipse
33 Watts
37 Watts
90+
90+
80+ HIGH 80+ HIGH
CRI CRI CRI CRI
77
62
81
64
3025 2350 3775 2950
2600 2025 3000 2350
Performance based on 3000K
1" Regress
CCT MULTIPLIER 2200K
Bevel Finish
Flange Finish
Color Rendering Index
Multiplier for
Lumen Output
2700K
80+
CRI
80+
CRI
90+
HIGH
CRI
0.72
0.94
0.78
3000K
3500K 4000K
80+
CRI
90+
HIGH
CRI
80+
CRI
80+
CRI
1.00
.78
1.00
1.06
90+ CRI is not available for 2200K, 3500K, or 4000K
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
51⁄2" x 51⁄2"
DEEP REGRESS DOWNLIGHT
DELIVERED PERFORMANCE
BeveLED 2.1
DEEP REGRESS
DOWNLIGHT
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Color Consistency
Deep Regress
9 Watts
90+
80+ HIGH
CRI
CRI
76
60
1150 900
675
550
12 Watts
80+
CRI
75
1300
900
90+
HIGH
CRI
58
1025
700
16 Watts
24 Watts
90+
90+
80+ HIGH 80+ HIGH
CRI
CRI
CRI
CRI
74
58
68
53
1725 1350 2400 1875
1175 925 1650 1275
2-Step MacAdam Ellipse
33 Watts
37 Watts
90+
90+
80+ HIGH 80+ HIGH
CRI CRI CRI CRI
63
49
65
51
3025 2350 3775 2950
2075 1625 2400 1875
Performance based on 3000K
21⁄2" Regress
CCT MULTIPLIER 2200K
Color Rendering Index
Multiplier for
Lumen Output
55º Cutoff
Bevel Finish
2700K
80+
CRI
80+
CRI
90+
HIGH
CRI
0.72
0.94
0.78
3000K
3500K 4000K
80+
CRI
90+
HIGH
CRI
80+
CRI
80+
CRI
1.00
.78
1.00
1.06
90+ CRI is not available for 2200K, 3500K, or 4000K
Flange Finish
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
51⁄2" x 51⁄2"
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 01/17/2017
®
BeveLED2.1
3110
DOWNLIGHT
ORDERING INFORMATION
DEEP REGRESS
1”REGRESS
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: 3110W - B1- S - 10 - LSTD4 - 9012 - C3 - 27KS - 50 - NC - 277V - DIML2 - CB27
TRIM ORDERING INFORMATION
TRIM
3110
BEVEL STYLE
OPTION
LENS
–
______
–
FLANGE FINISH
–
1” REGRESS DOWNLIGHT
3110
Square
Downlight
1" Regress
W
EML
3110
Square
Downlight
Deep
Regress
W
EML
Wet location 1
Integral Emergency
Test Switch 2
6” TechZone
ceiling compatible
(NCSM only)
N/A with 01 or 02
flange finishes.
TZ
01
02
10
13
21
28
RAL
B1 1" Regress Bevel, Painted S Solite
Die Cast Matches
(provided
Flange Finish
standard)
AB1 1" Regress Bevel,
F Frosted
Black Anodized
AC1 1" Regress Bevel,
Clear Matte Anodized
DEEP REGRESS DOWNLIGHT
Wet location 1
Integral Emergency
Test Switch 2
Clear Matte (AC Bevel only)
Black Anodized (AB Bevel Only)
White
Statuary Bronze
Black
Metalized Grey
Custom Color
(specify RAL #)
B2 2-1/2” Regress Bevel,
Painted Die Cast
Matches Flange Finish
AB2 2-1/2” Regress Bevel,
Black Anodized
AC2 2-1/2” Regress Bevel,
Clear Matte Anodized
1 Wet location, use with B1 and
B2 trims only.
2 See table on page 3.
HOUSING ORDERING INFORMATION
HOUSING CODE
WATTAGE
–
LSTD4
LSTD4
ENGINE
CODE
–
9009
9012
9016
9024
9033
9037
9W LED
12W LED
16W LED
24W LED
33W LED
37W LED
COLOR
–
C3
E1
REFLECTOR
–
22KS
27KS
30KS
35KS
40KS
27KH
30KH
HOUSING TYPE
–
SELECT ONE
VOLTAGE
–
–
2200K, 80+ CRI 3
1” REGRESS DOWNLIGHT
FT Flat Housing
2700K, 80+ CRI 25 25° beam
New Construction
3000K, 80+ CRI 50 50° beam
(FT is IC-rated up
3500K, 80+ CRI 90 90° beam
to 16W maximum)
4000K, 80+ CRI
NCSM New Construction
2700K, 90+ CRI
Narrow Width
3000K, 90+ CRI
NC New Construction,
all in one
CP Chicago Plenum
IC Insulation-Contact
Rated / Airtight 4
120V
277V
DEEP REGRESS DOWNLIGHT
2 Step MacAdam
ellipse is standard
for all
See performance
chart for precise
lumen information.
Not available with E1
light engine
USAI
Lighting
®
C25
NC New Construction,
25° beam
all in one
Comfort Cutoff
CP Chicago Plenum
C40
IC Insulation-Contact
40° beam
Rated / Airtight 4
Comfort Cutoff
C70
See emergency solutions
70° beam
Comfort Cutoff chart for EM options with
these housings
120V
347V
3
www.usailighting.com
[email protected]
4 Not available with E1 light
engine
1126 River Road
New Windsor, NY 12553
DIMMING DRIVER
OPTIONS
5
6
7
8
For use with 120V or 277V
DIML2 0-10V dim, 10%
(provided standard)
DIML4 Lutron A 3-wire/ECO, 1%
DIML4E Lutron 5 ECO, 5% 5, 8
DIML4H Lutron H ECO, 1% Fade 5
DIML6A EldoLED 0-10V, 0.1%,
logarithmic / Lutron controls
DIML6B EldoLED 0-10V Linear, 0.1%,
linear controls
DIML6E EldoLED 0-10V, 1%,
logarithmic/Lutron controls
DIML6F EldoLED 0-10V, 1%, linear
controls
DIML7 EldoLED DALI, 0.1%
DIML8 EldoLED DMX, 0.1% 6, 7
For use with 120V only
DIML3 Lutron A 2-wire, 1%
120V only
DIML19 Phase 2-wire dimming,
1% 120V only 5, 6, 8
For use with 347V only
DIML15 0-10V dim, 1% 347 only
N/A with 9W
N/A with 33W
N/A with FT housing
N/A with E1 light engine
T 845–565–8500
F 845–561–1130
ACCESSORIES
–
1” REGRESS DOWNLIGHT
CB27
CB52
EML
EMLW
27" C-Channel Bars
52" C-Channel Bars
Emergency battery 9
Emergency battery,
wet location 9
TZ 6” TechZone ceiling
compatible 10
DEEP REGRESS DOWNLIGHT
CB27
CB52
EML
EMLW
27” C-Channel Bars
52” C-Channel Bars
Emergency battery 9
Emergency battery,
wet location 9
9 See emergency solutions chart
for more details on EM options.
Not available with 347V
10
With NCSM housing only
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 01/17/2017
®
BeveLED2.1
3110
DOWNLIGHT
TRIM INFORMATION
1” REGRESS DOWNLIGHT TRIMS
1" Regress 6” TechZone Ceiling Compatible
1" Regress
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
51⁄2" x 51⁄2"
DEEP REGRESS DOWNLIGHT TRIM
EM fixtures that
are provided
with an integral
test switch
are shipped
with a hole in
the glass lens
for access.
Refer to
“EMERGENCY
SOLUTIONS”
chart to find out
which fixtures
have an integral
test switch.
Deep Regress
21⁄2"
Regress
1"
Regress
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
513⁄16" x 513⁄16"
Flange
Finish
N/A with
01 or 02
flange
finish
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
51⁄2" x 51⁄2"
3110 - 1” Regress Emergency Solutions
EM
Integral
Remote
Inverter
SERVICE
Test Switch Test Switch By Others
Housing
FT
NCSM*
N/A
Above ceiling
access required
NC
Through aperture
NC Wet Location Through aperture
CP
IC
EM fixtures that
are provided
with an integral
test switch
are shipped
with a hole in
the glass lens
for access.
Refer to
“EMERGENCY
SOLUTIONS”
chart to find out
which fixtures
have an integral
test switch.
Bevel
Finish
X
X
X
X
X
X
X
N/A
N/A
Housing
NC
3110 - Deep Regress Emergency Solutions
EM
Integral
Remote
Inverter
SERVICE
Test Switch Test Switch By Others
Through aperture
X
X
NC Wet Location Through aperture
CP
N/A
IC
N/A
X
X
X
X
X
X
* 347V cannot be offered with EM
* NCSM + DIML8 cannot be offered with EM, 347V cannot be offered with EM
HOUSING INFORMATION
NC, IC AND CP HOUSINGS BELOW ARE FOR USE WITH 1” REGRESS TRIMS & DEEP REGRESS TRIMS
Chicago Plenum (24W and less) - CP
IC / Airtight (24W and less) - IC
New Construction
Universal Style Housing - NC
7"
7"
11/8"
1 /8"
Chicago Plenum (33W) - CP
IC / Airtight (33W) - IC (not available with E1 light engine)
85/8"
1
7"
7"
11/8"
7"
13"
13"
13"
185/8" (Plan View)
185/8" (Plan View)
185/8" (Plan View)
22 /8" (Plan View)
221/8" (Plan View)
221/8" (Plan View)
1
HOUSINGS BELOW ARE FOR USE WITH 1” REGRESS TRIMS ONLY (FT AND NCSM ARE NOT AVAILABLE FOR USE WITH DEEP REGRESS)
New Construction
Flat Housing - FT (Not for use with deep regress trims)
FT housing is IC-rated up to 16W maximum.
23/4”
New Construction - Narrow Width - NCSM
(Not for use with deep regress trims)
43/4"
4”
11/4"
1 - 23/16"
71/4”
83/8"
Shown
with
EM option
81/4”
53/4"
16" (Plan View)
19" (Plan View)
19" (Plan View)
22(Plan View)
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
81/4"
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 01/17/2017
®
BeveLED2.1
3110
DOWNLIGHT
SPECIFICATIONS
TRIM: 4-1/2” square aperture with a 1” regress or deep regress bevel and 1/2” flange, retained by two mounting clips. Die cast aluminum bevel is
available in white, statuary bronze, black, and metalized gray painted finishes, with flange painted to match. Also available in black or clear matte
anodized finishes, with self-finish or contrasting painted flange. Custom colors are available (provide RAL#). Trim is shipped with a solite lens provided
standard.
Some examples of standard trim finish options for 3110 are shown below:
B1 - Painted Die Cast Trim
10 - White Bevel & Flange
B1 - Painted Die Cast Trim
13 - Statuary Bronze Bevel
& Flange
B1 - Painted Die Cast Trim
21 - Black Bevel & Flange
AB1 - Black Anodized Bevel
13 - Statuary Bronze Flange
AB1 - Black Anodized Bevel
28 - Metalized Grey Flange
AC2 - Clear Matte
Anodized Bevel
01 - Clear Matte Flange
B1 - Painted Die Cast Trim
28 - Metalized Grey Bevel
& Flange
AC2 - Clear Matte
Anodized Bevel
10 - White Flange
AC1 - Clear Matte
Anodozed Bevel
01 - Clear Matte Flange
AC1 - Clear Matte
Anodized Bevel
10 - White Flange
AB1 - Black Anodized Bevel
02 - Black Anodized Flange
AB2 - Black Anodized Bevel
02 - Black Anodized Flange
AB2 - Black Anodized Bevel
13 - Statuary Bronze Flange
AB2 - Black Anodized Bevel
28 - Metalized Grey Flange
FIELD REPLACEABLE LED LIGHT ENGINE: is serviceable through the aperture without tools. All USAI Lighting Classic White light engines feature
industry leading color consistency within a 2-Step MacAdam’s ellipse. 2200K is not available with E1 light engine.
FIELD REPLACEABLE DIMMING DRIVER: 0-10V, 100%-10% solid state electronic constant current DIML2 dimming driver with a high power factor
provided standard and sources 2mA. Specify 120V or 277V. Driver complies with IEEEC62.41 surge protection. Multiple dimming driver options are
available; some on-time delay may be experienced, depending on control system used.
EMERGENCY: Fixtures provided with an integral test switch are provided with a hole in the glass lens as per drawing. Fixtures provided with a
remote test switch are provided with a 24” lead length for location of the test switch. Fixtures that have no USAI EM option may be connected to an
inverter (by others) for emergency lighting. SPECIAL NOTE FOR NCSM HOUSING: DIML8 cannot be combined with EM options in NCSM housing. See
emergency solutions chart for more information on EM test switches and servicing.
HOUSING: 1” regress fixture housing options are NC, IC, CP, FT, and NCSM. DEEP regress fixture housing options are NC, IC, and CP only. FT and
NCSM housings are not available with DEEP regress trims. All-Ways Square® (covered by US Pat. No: US 7,832,889) housing allows alignment of
square aperture (up to 20° rotation) after housing installation and prior to finish ceiling installation. Fabricated of 20 ga. galvanized steel with thru wire
J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch circuit wiring. FT housing is IC-rated up to 16W maximum. IC-rated housings for use with 9W, 12W,
and 16W light engines only are rated for direct contact with spray foam insulation of R-42 or less. IC rated housing is Not available with E1 light engine.
NCSM with TZ option is compatible with 6” TechZone ceiling systems. When using DIML8, NCSM housing can NOT be used with thru-branch circuit
wiring.
MOUNTING: Butterfly brackets and adjustable nailer bars with integral nails provided. Nailer bars are extendible from 14” to 24” centers. C-channel
bars are optionally available for acoustical ceiling applications.
MAXIMUM CEILING THICKNESS: As noted on housing drawings.
CEILING CUT OUT: 5-1/16” x 5-1/16”
WARRANTY: Based on IESNA LM80-2008, BeveLED 2.1 has a 50,000 hour rated life at 70% lumen maintenance (L70). USAI Lighting Warranty covers
replacement parts for 5 years from date of shipment.
LISTINGS: Dry/Damp. Wet location option available with B1 trim only. NRTL/CSA-US tested to UL standards. IBEW union made. Energy Star Qualified
under Luminaires Specification V2.0. Please see Energy Star website for exact model #s included in the listing. Please note that the following options
are not Energy Star qualified: 22KS, 27KH, and 30KH light engines; E1 light engines; B-13, B-21, and AB trim styles; Frosted lens and EM options. CEC/
Title 24 Compliant up to 16W maximum. See CEC website for exact models included.
NOTES:
• Not for use in corrosive environment.
• Use of pressure washer voids warranty.
PHOTOMETRICS: Consult factory or website for IES files. Tested in accordance with IESNA LM79.
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 01/17/2017
DOWNLIGHT
®
BeveLED2.1
3110
DELIVERED PERFORMANCE
3110 / 3311 16W 30KS 25° 1” Regress
3110 / 3311 33W 30KS 25° 1” Regress
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 01/17/2017
DOWNLIGHT
®
BeveLED2.1
3110
DELIVERED PERFORMANCE
3110 / 3311 16W 30KS 50° 1” Regress
3110 / 3311 33W 30KS 50° 1” Regress
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 01/17/2017
DOWNLIGHT
®
BeveLED2.1
3110
DELIVERED PERFORMANCE
3110 / 3311 16W 30KS 90° 1” Regress
3110 / 3311 33W 30KS 90° 1” Regress
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 01/17/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D2 / DIML2
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D2 / DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%)
Manufacturer
120V / 277V
Crestron
Crestron
Crestron
Crestron
Crestron
Leviton
Lightolier (Philips)
Lutron
Product
D2 / DIML2 Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
iLux dimmer expansion module
DIN Rail dimmer
DIN Rail analog output module
8 Channel dimmer module
8 Channel dimmer module
IllumaTech dimmer
Vega
Diva
CLS-EXP-DIMFLV
DIN-4DIMFLV4
DIN-A08
GLX-DIMFLV8
GLXP-DIMFLV8
IP710-DLX
V2000FAMU
DVTV-XX
Qty Fixtures
Per Dimmer*
Use source current per
fixture specification
sheet to determine
number of fixtures per
dimmer. Max number
of fixtures is limited by
dimmer load rating.
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D2 / DIML2
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
DIMMER: 0-10V
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
RELAY
(BY OTHERS)
NEUTRAL
DIMMER: 0-10V w/
POWER SWITCHING
D2 / DIML2
0-10V DIMMING (NO RELAY)
FIXTURE
(BY OTHERS)
LINE
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GROUND
GND
NEUTRAL
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-2 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D3 / DIML3
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D3 / DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V
D3 / DIML3 Dimmer Compatibility Chart
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Maestro Wireless® 600W dimmer
Maestro Wireless® 1000W dimmer
HomeWorks® QS adaptive dimmer
HomeWorks® QS 600W dimmer
HomeWorks® QS 1000 W dimmer
Caseta Wireless® Pro 1000W dimmer
Stanza® dimmer
RadioRA® 2 adaptive dimmer
RadioRA® 2 1000 W dimmer
myRoom DIN power module
HomeWorks® QS wallbox power module
Homeworks® DIN power module
HomeWorks® wallbox power module
GRAFIK Eye® QS control unit
GRAFIK Eye® 3000 control unit
RPM-4U module
RPM-4A module
GP dimming panels
Ariadni CL 250W dimmer
Diva CL 250W dimmer
Grafik T CL or RF CL dimmer
Nova T CL 250W dimmer
ELV10
ELV10
MRF2-6ND-120MRF2-10ND-120HQRD-6NAHQRD-6NDHQRD-10NDPD-10NXDSZ-6NDRRD-6NARRD-10NDMQSE-4A1-D
HQRJ-WPM-6D-120LQSE-4A1-D
HWI-WPM-6D-120
QSGR-, QSGRJGRX-3100-, GRX-3500HW-RPM-4U-120, LP-RPM-4U-120
HW-RPM-4A-120, LP-RPM-4A-120
Various
AYCL-253PDVCL-253P-, DVSCCL-253PGT-250M-, GTJ-250MNTCL-250-
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100%-1%
100%-1%
100%-1%
100%-1%
Qty Fixtures Per Dimmer*
Fixture Wattage
39W and Less 40W - 80W
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1 – 13
1–6
1–8
1–4
1–8
1–4
1 – 13
1–6
1 – 13
1–6
1–8
1–4
1–8
1–4
1–6
1–3
1–6
1–3
1 – 26
1 – 13
1–6
1–3
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1–8
1–4
1–8
1–4
1 – 10
1–5
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D3 / DIML3
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
WHITE
DRIVER
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-3 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D4 / DIML4
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
277V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
D4 / DIML4 3-Wire Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Vareo
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10NTF-103PNF-10NF-103PVF-10SF-10P-, SF-103PDVF-103P-, DVSCF-103PAYF-103PVTF-6AMAF-6AM-, MSCF-6AMMRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-120, PHPM-3F-DV
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10-277NTF-103P-277NF-10-277NF-103P-277SF-12P-277-, SF-12P-277-3
DVF-103P-277-, DVSCF-103P-277AYF-103P-277VTF-6AMAF-6AM-277-, MSCF-6AM-277MRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-DV
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–53
1–26
1–53
1–26
1–41
1 – 20
1–20
1 – 10
1–41
1 – 20
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–15
1–7
1–15
1–7
1–15
1–7
1–15
1–7
1–15
1–7
1–41
1 – 20
1–41
1 – 20
40W and Less 41W - 80W
1–53
1–26
1–53
1–26
1–44
1 – 22
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–20
1 – 10
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–88
1 – 44
1–88
1 – 44
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
DIML4 wiring diagrams continued on next page
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D4 / DIML4 Continued
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
D4 / DIML4
3 WIRE PHASE DIMMING
FIXTURE
DIMMER: 3 WIRE PHASE
(BY OTHERS)
CAP UNUSED
ECOSYS WIRES
DIMMED HOT
SWITCHED HOT
NEUTRAL
LINE
LED
PURPLE GRAY
PURPLE
ORANGE
BLACK
WHITE
GREEN
GROUND
DRIVER
V+
RED
V-
BLACK
GND
NEUTRAL
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with EcoSystem Control / LED Dimming Driver Wiring (Dims down to
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
D4 / DIML4 EcoSystem Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Product
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
D4 / DIML4
EcoSystem CONTROLS
ECOSYS BUS
E2
E1
E2
FIXTURE
E1
WALL CONTROL
(BY OTHERS)
LINE
NEUTRAL
CAP
UN-USED
ORANGE
WIRE
PURPLE GRAY
PURPLE
ORANGE
BLACK
WHITE
GREEN
LED
DRIVER
V+
RED
V-
BLACK
GND
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D4E / DIML4E and D4H /DIML4H
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D4E / DIML4E LED: Lutron 5 Series EcoSystem LED Driver / LED Dimming Driver Wiring (Dims down to 5%)
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
D4E / DIML4E EcoSystem Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Product
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–5%
100%–5%
100%–5%
100%–5%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
D4H / DIML4H LED: Lutron H Series EcoSystem LED Driver with Fade to Black (dims down to 1%)
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
D4H / DIML4H EcoSystem Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Product
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
D4E / DIML4E and D4H / DIML 4H
EcoSystem CONTROLS
ECOSYS BUS
E2
E1
E2
FIXTURE
E1
WALL CONTROL
(BY OTHERS)
LED
PURPLE GRAY
PURPLE
LINE
BLACK
NEUTRAL
WHITE
DRIVER
V+
RED
V-
BLACK
GREEN
GND
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4EH Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D6A / DIML6A and D6E / DIML6E
D6B / DIML6B and D6F / DIML6F
®
USAI
Lighting
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D6A / DIML6A and D6E / DIML6E LED Dimming Compatibility Table
D6A / DIML6A and D6E / DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below)
D6A / DIML6A = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1%
D6E / DIML6E = EldoLED ECOdrive 0-10V control dims from 100% to 1%
D6A / DIML6A and D6E / DIML6E Dimmer Compatibility Chart
Dimmed Light
Qty Fixtures
Manufacturer Product
Part Number
Output Range
Per Dimmer*
120V & 277V
DIML6A 6E Refer to manufacturer's
Lutron
Diva
DVTV/NFTV/NTFTV with PP-20
99% - 0.1% 1% dimmer load rating for
Lutron
Energi Savr Node
QSN-4T16-S
100% - 0.1% 1% maximum and minimum
Lutron
GP Dimming Panels TVM2 Module
99% - 0.1% 1% fixture quantities per
Lutron
Interfaces
GRX-TVI w/ GRX3503
100% - 0.1% 1% dimmer.
Sensor Switch nIO
nIO EZ
100% - 0.1% 1% Enlighted compatible.
enlighted
Control Unit
CU-3E-1R
100% - 0.1% 1%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D6B / DIML6B and D6F / DIML6F LED Dimming Compatibility Table
D6B / DIML6B and D6F / DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-Lutron and others listed in
the table below)
DIMMER:SOLOdrive
0-10V
D6B / DIML6B = EldoLED
0-10V control dims from 100% to 0.1%
(BY OTHERS)
D6F / DIML6F = EldoLED ECOdrive 0-10V control dims from 100% to 1%
LED
0-10V (-)
GRAY
D6B / DIML6B and D6F / DIML6F Dimmer Compatibility Chart
0-10V (+)
PURPLE
Dimmed Light
Qty Fixtures
V+
RED
SWITCHED HOT
SWITCHED
HOTNumber DRIVER
Manufacturer
Product
Part
Output Range
Per Dimmer*
VBLACK
NEUTRAL
WHITE
120V & 277V
DIML6B 6F Refer to
GREEN 2112U-101
Bush-Jaeger
Electronic potentiometer
100% - 0.1% 1% manufacturer's
Jung
Electronic potentiometer
100% - 0.1% 1% dimmer load
GND 240-10
CLASS 2 CONTROL WIRES
Leviton
IllumaTech dimmer
IP710-DLX
100% - 0.1% 1% rating for
LINE
Lightolier
(Philips) Momentum (120V ONLY)
ZP600FAM120
100% - 0.1% 1% maximum and
RELAY
Merten
Electronic
potentiometer
5729
100% - 0.1% 1% minimum fixture
(BY OTHERS)
DIML6A,
6B
Pass & Seymour Titan
CD4FB-W
100% - 0.1% 1% quantities per
NEUTRAL
TO SWITCH POWER
Watt Stopper
Miro 0-10V DIMMING W/RELAY
DCLV1
100% - 0.1% 1% dimmer.
Synergy
Wallbox Dimmers
ISD BC
100% - 0.1% 1% Enlighted
ABB
i-bus
SD/S 2.16.1
100% - 0.1% 1% compatible.
Crestron
Modules
GLX-DIMFLV8, GLXP-DIMFLV8
100% - 0.1% 1%
Crestron
Green Light
GLPAC-DIMFLV4-, GLPAC-DIMFLV8100% - 0.1% 1%
DIML6A, 6B
0-10V (-)
Crestron
Green Light Power Pack
GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM,
GLPP-1DIMFLV3EX-PM
100% - 0.1% FIXTURE
1%
0-10V DIMMING
W/RELAY TO GRAY
SWITCH POWER
0-10V (+)
PURPLE
DIMMER: 0-10V
Crestron
DIN Rail Analog Output Module
DIN-A08
100% - 0.1% 1% V+ RED
SWITCHED HOT
BLACK
Crestron
DIN Rail 0-10V Fluorescent Dimmer
DIN-4DIMFLV4
100% - 0.1% 1% LEDV- BLACK
NEUTRAL
WHITE
GREEN
Crestron
iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV
100% - 0.1% 1%
DRIVER
GND
enlighted
Control Unit
CU-3E-1R
100% - 0.1% 1%
CLASS 2 CONTROL WIRES
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and
LINEcircuit details.
(BY OTHERS)
RELAY
(BY OTHERS)
DIMMING DRIVER WIRING SCHEMES:
NEUTRAL
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
D6 / DIML6
0-10V DIMMING W/RELAY TO SWITCH POWER
D6 / DIML6
0-10V DIMMING (NO RELAY)
FIXTURE
DIMMER: 0-10V
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
(BY OTHERS)
LINE
GREEN
GROUND
GND
CLASS 2 CONTROL WIRES
LINE
FIXTURE
DIMMER: 0-10V w/
POWER SWITCHING
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
GREEN
GND
RELAY
(BY OTHERS)
NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
DIML6A, 6B
[email protected]
1126 River Road
New Windsor, NY 12553
0-10V DIMMING (NO RELAY)
DIMMER: 0-10V w/
POWER SWITCHING
(BY OTHERS)
FIXTURE
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-6 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D7 / DIML7
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D7 / DIML7 LED: EldoLED DALI Dimming Driver Wiring (Dims down to 0.1%)
D7 / DIML7
DALI CONTROLS
DALI BUS
DA
DA
FIXTURE
WALL CONTROL
(BY OTHERS)
LINE
NEUTRAL
LED
ORANGE (-)
ORANGE/WHITE (+)
BLACK
WHITE
GREEN
DRIVER
V+
RED
V-
BLACK
GND
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-7 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D8 / DIML8
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D8 / DIML8 LED: EldoLED DMX Dimming Driver Wiring (Dims down to 0.1%)
DMX BUS - XLR CABLE OR
SHIELDED DATA CABLE
The data cable used must meet the following requirements:
• type: shielded, 2-conductor twisted pair
• maximum capacitance between conductors: 30 pF/ft
• maximum capacitance between conductor and shield: 55 pF/ft
• maximum resistance: 0.02 ohms/ft
• normal impedance: 100-140 ohms
• conductive core: 24 AWG is recommended
If 3-wire data cables are preferred, we suggest a Belden 9841 or equivalent cable which meets
the specifications for EIA RS-485 applications. Do not use standard microphone cables: they
cannot transmit DMX512 data reliably over long distances. NOTE: DMX link termination device
(by others) should be used on last fixture in line on a circuit to avoid signal loss.
DMX BUS - XLR CABLE OR
SHIELDED DATA CABLE
SHIELD
DMX (-)
DMX (+)
5 PIN XLR JACKS STANDARD
8 BIT DMX 512
CONTROLLER
(BY OTHERS)
LINE
NEUTRAL
RED
BLACK
BARE
BLACK
WHITE
GREEN
LED
DRIVER
V+
RED
V-
BLACK
GND
FIXTURE
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-8 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D15 / DIML15
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D15 / DIML15 LED: 0-10V, 347V Dimming Driver Wiring (Dims down to 1%) 347V Only
Manufacturer
347
Acuity
Douglas Lighting
Hubbell
Leviton
Leviton
Lutron
Lutron
Product
D15 / DIML15 Dimmer Compatibility Chart
Dimmed Light
Output Range
Synergy ISD-BC
WPN-5721, WPN-5822
Light Hawk2 LHD-IRS3-N347-xx
Illumatech IP710-DLZ with 347V relay
Centura Fluorescent Control System
Nova NFTV-* dimmer plus 347V relay
Diva DVTV-* dimmer plus 347V relay
Qty Fixtures
Per Dimmer*
Use source current per
fixture specification
sheet to determine
number of fixtures per
dimmer. Max number
of fixtures is limited by
dimmer load rating.
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D15 / DIML15
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
DIMMER: 0-10V
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
RELAY
(BY OTHERS)
NEUTRAL
DIML2
0-10V DIMMING (NO RELAY)
FIXTURE
DIMMER: 0-10V w/
POWER SWITCHING
(BY OTHERS)
LINE
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
USAI
Lighting
NEUTRAL
DRIVER
RED
V-
BLACK
GREEN
GROUND
®
LED
V+
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
GND
T 845–565–8500
F 845–561–1130
NOTE:
Quickship fixtures are shipped prewired for
0-10V dimming controls. If switched, nondimming operation is desired, cap off purple
and gray wires separately at installation. Do
NOT cap purple and gray wires together.
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-15 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D19 / DIML19
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D19 / DIML19 LED: Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver.
Dims down to 1% contingent upon dimmer specification and load. 120V only.
D19 / DIML19
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
DRIVER
WHITE
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
D19 / DIML19 Dimmer Compatibility Chart
120V ONLY
Forward Phase / TRIAC Dimming
Manufacturer
Product
Qty Fixtures Per Dimmer
Leviton
IPL06-10Z
Use fixture wattage per
6613-xxx
fixture specification
Lutron
S-600P
sheet to determine
S-603P
number of fixtures
DV-600P
per dimmer. Max number
DV-603P
of fixtures is limited by
DVSC-603P
dimmer load rating.
CT-600P
CT-603P
120V ONLY
Reverse Phase / ELV Dimming
Manufacturer
Product
Leviton
6615
IPE04-xxx
Lutron
NTELV-300
NTELV-600
SELV-300P
SELV-303P
DVELV-300P
DVELV-303P
USAI
Lighting
®
www.usailighting.com
[email protected]
Qty Fixtures Per Dimmer
Use fixture wattage per
fixture specification
sheet to determine
number of fixtures
per dimmer. Max number
of fixtures is limited by
dimmer load rating.
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-19 Revised 03/22/2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement