Wireless Maintenance Starter Kit

Wireless Maintenance Starter Kit
Wireless
Maintenance
Starter Kit
Model #SK-0609
The Wireless Maintenance Starter Kit
contains everything required to start up a
wireless vibration surveillance program.
The kit includes five wireless
accelerometers, Network Access Point,
Ethernet crossover cable, configuration
and analysis software, and phone support.
By connecting a WindowsXP PC to the
network access point, the user can install,
configure, and analyze vibration data from
five wireless accelerometers. Simply
locate the Network Access Point within
250 feet of the accelerometers.
Connecting the user supplied laptop to the
Network Access Point using the Ethernet
crossover cable enables the user to configure the accelerometers over the wireless network (e.g. 800 line
FFT, 90 KHz Fmax, every 45 minutes). Once configured, the laptop can be disconnected and the
Network Access Point and accelerometers can be left unattended for hours, days or weeks. Vibration
records are stored in non-volatile RAM in the Network Access Point. Upon returning with a laptop, the
user can download all the historical data for analysis. The system can then be easily and rapidly moved to
monitor another machine. The Wireless Maintenance Starter Kit can be expanded to handle larger and
more complex systems by simply adding additional accelerometers.
Copyright 2000-2006, All Rights Reserved, Techkor Instrumentation, A Division of Advanced Conversion Technology, Inc.
Authorized Distributor: ICE SYSTEMS Inc.
Tel: 905-834-7785 / 1-800-807-0894
http://www.icenergy.ca / [email protected]
Operational Layout
A typical layout of the wireless system consists of a Windows PC, NAP914P Network Access Points,
REP914 Active Repeaters, M9E-RF-1-50G Accelerometers, and TACH-RF-L Laser Tachometers. The
wireless network is an automatically configurable network. Simply install the Network Access Points on
an existing enterprise LAN with overlapping coverage, and then install the wireless sensors on the
machinery to be monitored. Machinery vibration data can then be monitored from a PC anywhere on the
enterprise LAN or transmitted to a PC anywhere in the world via an Internet gateway. The system is
easily scalable by simple adding additional Accelerometers, Repeaters, and Network Access Points as
needed.
EXPANSION
Adding Accelerometers:
A single Network Access Point can handle hundreds of accelerometers. By adding accelerometers to the
already existing wireless network, the Starter kit system can be expanded to cover a large number of
machines. Distances between accelerometers and Network Access Points can be significantly extended
by introducing battery powered Repeaters into the system.
Adding Network Access Points:
A cellular grid of coverage can be obtained by adding network access points. Up to 128 network access
points can be used together to provide overlapping coverage for wireless accelerometers.
Accelerometers automatically route information through the best access point and will dynamically
change routing if conditions require.
Networking the Access Points:
The network access points can be operated directly on an enterprise network, by properly configuring the
IP settings. This eliminates the need to connect a laptop to the Network Access Point to download data.
Networked access points automatically download data as it arrives so it is always available for analysis.
Applications Include:
Features:
•
Small to large-scale installations
•
Supports 1,000's of wireless sensors
•
Difficult-to-reach locations
•
Easy installation and expansion
•
Dangerous environments
•
Typical battery life of over two years
•
Machinery with safety interlocks or guards
•
Encrypted and secure transmissions
•
Remote or satellite operations
•
Existing database compatibility
•
Short-term infant mortality monitoring
•
License free 902-928 MHz ISM band
•
Early detection in quick time-to-failure equipment
•
Frequent monitoring of critical applications
•
Expansive plant layout
Copyright 2000-2006, All Rights Reserved, Techkor Instrumentation, A Division of Advanced Conversion Technology, Inc.
Authorized Distributor: ICE SYSTEMS Inc.
Tel: 905-834-7785 / 1-800-807-0894
http://www.icenergy.ca / [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement