Enclosures - Support Carlo Gavazzi AB
CARLO GAVAZZI
Automation
Components
Enclosures
• Polycarbonate
• ABS
• Steel
• Aluminium
Enclosures
Contents
Page
Overview
Introduction
Specifications, Directives and Standards
Degree of protection table
2
4
5
5
Enclosures
-
MUMBRCA series
Polyestyrene IP40 / IP54(with transparent cover)
6
MUMB series
Polycarbonate/ABS IP65
8
END series
Polycarbonate/ABS IP66 / IP67
9
ENS series
Polycarbonate/ABS IP66 / IP67
11
ENO/ENC series
Polycarbonate/ABS IP66 / IP67
13
ENW series
Polycarbonate IP66 / IP67
19
MUMB-R series
Polycarbonate/ABS IP65
21
MUMB A series
Aluminium IP65
22
ENE series
Steel IP66 / IP55(with two doors)
24
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
1
Enclosures
Series
MUMBRCA series
MUMB series
END series
ENS series
Material
Degree of Protection
Polystyrene
IP40 / IP54*
Polycarbonate / ABS
IP65
Polycarbonate / ABS
IP66 / IP67
Polycarbonate / ABS
IP66 / IP67
*(with transparent cover)
Characteristics
Standard
Colour
EN62208
Grey RAL 7035
EN62208
Grey RAL 7035
EN62208
Grey RAL 7035
EN62208
Grey RAL 7035
Grey cover
Transparent cover
Temperature resistant
•
-20°C to +60°C
•
•
PC
ABS
•
• (always polycarbonate)
PC
-50°C to +100°C
ABS -40°C to +60°C
•
• (always polycarbonate)
PC
-50°C to +100°C
ABS -40°C to +60°C
Impact strength Kpcm/cm2
EN 62262 (+35°C / -25°C)
90
-
>30 (PC) >10 (ABS)
-
IK8/IK8 (PC); IK7/IK6 (ABS) IK8/IK8 (PC) IK7/IK6 (ABS)
Flammability UL 94
Self extinguibility
Self extinguibility
V-2 (PC);
Cover gasket
Cover screw
Neoprene
-
Neoprene
Stainless steel
PUR (polyuretane)
Stainless steel
PUR (polyuretane)
Polyamide
Min. Dimension
(WxHxD) mm
130x180x78
170x80x55
53x55x36
75x125x75
Max. Dimension
(WxHxD) mm
295x250x128
170x80x70
230x300x111
175x250x150
-50°C to +100°C
-40°C to +60°C
Technical Data
HB (ABS)
V-2...5VA (PC); HB (ABS)
Dimensions Range
Accessories
Front plate
Mounting plate
Quick release fastener
Wall mounting brackets
Rubber feet
Hinges
Hinged cover screws
DIN rail
Drain water plug
Locking device
Base (only)
Extension frame
Flanges
Modular cover
Certificates
Detailed information
on page
• = Available,
2
•
•
•
•
-
•
•
•
•
-
•
•
•
•
•
•
-
•
•
•
•
•
•
-
CE
CE
CE
CE
6
8
9
11
- = Not available
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Enclosures
ENO/ENC series
ENW series
MUMB-R series
MUMBA series
ENE series
Polycarbonate / ABS
IP66 / IP67
Polycarbonate
IP66 / IP67
Polycarbonate / ABS
IP65
Aluminium
IP65
Steel
IP66 / IP55*
*(with two doors)
EN62208
Grey RAL 7035
EN62208
Grey RAL 7035
EN62208
Grey RAL 7035
EN62208
Grey RAL 7001
EN62208
Grey RAL 7032
•
• (always polycarbonate)
PC
-50°C to +100°C
ABS -40°C to +60°C
•
• (always polycarbonate)
-50°C to +100°C
•
PC
ABS
•
-40°C to +110°C
•
-
IK8/IK8 (PC) IK7/IK6 (ABS)
IK8/IK8
>30 (PC); >10 (ABS)
-
7 Nm
-
IK09
V-2...5VA (PC); HB (ABS)
V-2...5VA (PC)
Self extinguibility
-
-
PUR (polyuretane)
Polyamide
PUR (polyuretane)
-
Neoprene
Stainless steel
Neoprene
Stainless steel
PUR (polyuretane)
-
200x200x132
200x200x132
200x120x68
50x45x30
200x300x150
400x600x185
400x600x185
240x120x113
600x310x180
1000x1200x300
• = Available,
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
CE
13
-50°C to +100°C
-40°C to +60°C
•
•
•
•
-
•
•
•
-
•
•
•
•
•
•
•
-
CE
CE
CE
CE
19
21
22
24
(as standard)
(as standard)
(as standard)
(as standard)
(as standard)
- = Not available
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
3
Introduction
Carlo Gavazzi wide own offer
with a new range of products:
the enclosures.
Our products are designed
and tested to meet a wide
range of applications and to
operate under even the most
extreme conditions.
Our enclosures are made in
plastic or in metal material.
The plastic types are
manufactured in a high
quality polycarbonate, ABS
plastic and fiber glassreinforced polyester. Most of
our enclosures are available
either in grey or transparent
cover. Some properties are a
good
resistance
to
chemicals, wide temperature
resistance range and selfextinguishing.
The
metal
types
are
manufactured in aluminium
or steel. The enclosures
made of aluminium offer
Thermoplastic Enclosures
Carlo Gavazzi thermoplastic
enclosures are manufactured
in high quality polycarbonate
or ABS plastics.
Although plastic is much
lighter than steel, its impact
resistance is very high. In
addition, any dents or bumps
are not as noticeable in
plastic as they would be in
steel.
The
degree
of
protection of all thermoplastic
enclosures is at least IP 65.
Polycarbonate is suitable for
demanding conditions and
also for outdoor use. The
temperature resistance of
polycarbonate ranges from
-50°C to +120°C. For
enclosure production, we use
only UL-listed polycarbonate
raw materials, which have the
so-called Yellow Card.
The bases of polycarbonate
enclosures with knock-outs
have been reinforced with
fibreglass in order to add
rigidity to the enclosure walls
and to make it easier to
knock out flanges and cable
entries. Fibreglass raises the
flammability to 5 V (UL 94).
The other thermoplastic
material we use is ABS, acrylbutadiene-styrene.
The heat resistance of ABS is
not as good as that of
polycarbonate, and because
its resistance to UV radiation
4
is low, it is only suitable for
indoor use.
In addition, the impact
resistance of ABS is not
comparable to that of
polycarbonate.
However,
there are applications for
which ABS is more suitable
than polycarbonate, due to
its good resistance to certain
chemicals,
e.g.
strong
detergents used in dairies.
The
advantage
of
thermoplastics,
both
polycarbonate and ABS, is
that they are easily machined
using standard tools.
The standard colour of
thermoplastic enclosures is
grey RAL 7035.
good resistance against
solvents.
The
steel
enclosures, in a choice of
polyester-painted mild steel,
stainless steel or on request
acid-proof steel, are suitable
for outdoor use or industrial
environment (excellent for
food industry).
Enclosures
should
be
selected on the basis of their
proposed contents and
location. When selecting the
size, please consider whether
further components are likely
to be added at a later stage
and, if so, whether the
dimensions of the enclosure
will still be adequate. The
enclosure
dimensions
quoted are always external
dimensions, so it is important
to remember that the internal
mounting space available is
always smaller than the
actual enclosure.
Metal Enclosures
The Carlo Gavazzi steel
enclosures are available in
polyester-painted mild steel
and stainless steel AISI 304.
On request, they can also be
supplied in acidproof steel
AISI 316.
For
polyester-painted
enclosures, the following
processes are carried out:
• cleaning (alkaline
degreasing)
• zinc phosphating
• rinsing
• drying
• polyester-powder painting,
stand ard colour grey RAL
7032, layer thickness 80 –
120µ, does not contain TGIC
• oven drying.
Stainless steel is, of course,
suitable for outdoor use, and
for demanding industrial
environments – for example,
the food industry. Its
advantages
are
high
resistance to corrosion and
UV radiation.
Additionally, stainless steel is
very practical as it needs
scarcely any maintenance. It
is, however, more expensive
than painted mild steel.
Acid-proof steel is used for
environments
requiring
extreme
resistance
to
corrosion, or those where
ordinary stainless steel is not
recommended: for example,
in the offshore industry.
The good qualities of steel
include the potential it offers
for
customer
specific
solutions: if a suitable size
cannot be found from our
selection
of
standard
enclosures,
a
smaller
production series can easily
be customised.
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
European Directives
The guarantee of free
movement of goods within
the European Community
assumes elimination of any
regulatory
differences
between the member states.
European Directives set up
common rules that are
included in the legislation of
each
state
while
contracditory regulations
are cancelled.
There are three main
directives :
• Low Voltage Directive
73/23/EEC, amended by
Directive
93/68/EEC
concerning
electrical
equipment from 50 to 1000 V
a.c. and from 75 to 1500 V d.c.
This specifies that compliance
with the requirements that is
sets out is acquired once the
equipment conforms to the
standards harmonised at
European level: EN 60947-1
and EN-60947-5-1 for limit
switches.
Signification of CE marking
CE marking
must not be
confused with a quality label.
CE marking
placed on a
product is proof of conformity
with the European Devices
concerning the product.
CE marking is part of an
administrative procedure and
guarantees free movement of
the product within the
European Community
• Machine Directives –
89/392/EEC, 91/368/EEC,
93/44/EEC, 93/68/EEC –
defining main safety and
requirements
health
concerning
design
and
manufacture of the machines
and
other
equipment
including safety components
in European Union countries.
•
Electromagnetic
Compatibility
Directive
89/336/EEC, amended by
Directive 92/31/EEC and
93/68/EEC
Directive
concerning all electrical
devices likely to create
electromagnetic disturbances.
Certificates
Carlo Gavazzi enclosures are
certified in accordance with
EN62208.
To manufacturer most of our
polycarbonate enclosures, we
use only UL-listed polycarbonate raw materials, which
have the so-called Yellow
Card.
Degree of protection table
1st NUMERAL IP
Protection against
solid object.
(EN65529)
2nd NUMERAL IP
Protection against
liquid
(EN65529)
4
No protection
1 Rigid sphere without
handle or guard 50mm
diameter @ 50N ± 0%
As for numeral 3 spary ±
80° from vertical
5
Dust chamber with or
without underpressure
0
6
1
Dust chamber with
pressure
(EN62262)
4
Rigid steel wire 1.0mm
diameter with edges free
from burrs @ 1N ± 10%
0
IK-classes,
Impact strength
No protection
Drip box, enclosure on
turnatable @ 1mm/min for
10min
5
Water jet hose nozzle
6.3mm diameter, distance
2.5m to 3mm
0
6
01-05
Water jet hose nozzle
12.5mm diameter, distance
2.5m to 3mm
No protection
impact < 1 joule
08
impact 5 joule
09
impact 10 joule
10
impact 20 joule
0.15
1m
2 Rigid sphere without
handle or guard 12.5mm
diameter @ 30N ± 10%
2 Drip box, enclosure in 4
fixed positions of 15° tilt @
3mm/min for 2.5min
7 Immersion tank waterlevel on enclosure: 0.15m
above top 1m above bottom
06
impact 1 joule
07
impact 2 joule
1m
3
Rigid steel rod 2.5mm
diameter with edges free
from burrs @ 3N ± 10%
3 Oscillanting tube spray ±
60° from vertical distance
max. 200mm
8
Immersion tank waterlevel: by agreement
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
5
Polystyrene enclosures
MUMBRCA series
IP40/IP54(with transparent cover)
• Polystyrene
• Grey RAL 7035
• Temperature resistant: -20°C to +60°C
• Degree of protection: up to IP54
• 2 function rooms
• Shock and warp resistant
• EN62208
• CE
Ordering Key
Product Description
The Enclosure of serie
MUMBRCA is composed
with two function rooms and
it can be installed an
Aluminium
front
plate
(optional).
This is the best solution of
small
controllers
for
measurement and control
technique.
The clamping connection
can be freely accessed
through
the
separate
connection cavity lid.
Repturable openings for the
insertion of PG´s are found in
the connection cavity wall.
Seven M 3 threaded
bushings
have
been
intended for the installation
of circuit boards or mounting
plates in the internal space.
Material
CA
Series
Material
Dimensions
Approvals
Dimensions
Polystyrene
13
14
16
17
20
25
30
31
13K (with transparent cover)
14K (with transparent cover)
16K (with transparent cover)
17K (with transparent cover)
20K (with transparent cover)
25K (with transparent cover)
30K (with transparent cover)
31K (with transparent cover)
6
MUMBR CA 13K
Width
(mm)
130
130
165
165
213
257
295
295
130
130
165
165
213
257
295
295
Height
(mm)
180
180
155
155
180
214
250
250
180
180
155
155
180
214
250
250
Depth
(mm)
78
96
69
96
80
108
86
107
98
116
88
115
96
128
107
128
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Polystyrene enclosures
MUMBRCA series
IP40/IP54(with transparent cover)
Accessories
Adapted for Eenclosures with
Dimension Codes
Front plate
Mounting plate
Wall mounting brackets
13
14
16
17
20
25
30
31
13K
14K
16K
17K
20K
25K
30K
31K
MUMBRCA13FP
MUMBRCA13FP
MUMBRCA16FP
MUMBRCA16FP
MUMBRCA20FP
MUMBRCA25FP
MUMBRCA30FP
MUMBRCA30FP
MUMBRCA13FP
MUMBRCA13FP
MUMBRCA16FP
MUMBRCA16FP
MUMBRCA20FP
MUMBRCA25FP
MUMBRCA30FP
MUMBRCA30FP
MUMBRCA13M
MUMBRCA13M
MUMBRCA16M
MUMBRCA16M
MUMBRCA20M
MUMBRCA25M
MUMBRCA30M
MUMBRCA30M
MUMBRCA13M
MUMBRCA13M
MUMBRCA16M
MUMBRCA20M
MUMBRCA20M
MUMBRCA25M
MUMBRCA30M
MUMBRCA30M
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
MUMBRCAWL
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
7
Polycarbonate / ABS Enclosures
MUMB series
IP65
• Polycarbonate and ABS
• Grey RAL 7035
• Temperature Resistant in ABS : -40°C to +60°C
• Temperature Resistant in Polycarbonate: -50°C to +100°C
• Degree of protection: IP 65
• 4 unloseable cover screws
• Oil and petroleum resistant
• EN62208
• CE
Ordering Key
Product Description
The Enclosure of MUMB
serie is an Enclosure with two
function areas, on which it is
easy to separate electronic
components from electrical
connection.
The lid screws cannot be lost
and are made of stainless
steel.
The fastening grooves are
situated outside the seal
range.
The neoprene cover seal is
resistant against oil and
petroleum.
Series
Material
Dimensions
Approvals
Material
PC
AB
MUMB PC 178055
Dimensions
Polycarbonate
ABS
178055
178060
178070
Width
(mm)
Heigth
(mm)
Depth
(mm)
170
170
170
80
80
80
55
60
70
Accessories
Adapted for enclosure
with Dimension Code
Mounting plate
Rubber feet 4 pcs
External hinge pair
(loose)
Wall mounting
brackets
178055
178060
178070
MUMBMT17M
MUMBMT17M
MUMBMT17M
MUMBMTFU
MUMBMTFU
MUMBMTFU
MUMBMT17GAM
MUMBMT17GAM
MUMBMTWL
MUMBMTWL
MUMBMTWL
Accessory for all the enclosures
Clear Lid
8
120 x 80mm
MUMBM17K
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Polycarbonate / ABS Enclosures
END series
IP66/67
• Polycarbonate and ABS
• Grey RAL 7035
• Temperature Resistant in ABS : -40°C to +60°C
• Temperature Resistant in Polycarbonate: -50°C to +100°C
• Degree of protection: IP66/67
• EN62208
• CE
Ordering Key
Product Description
The enclosure of END serie is
a small/medium size of
enclosure dedicated to OEM.
It is manufactured of high
quality
thermoplastics:
polycarbonate and ABS.
The enclosures always have
plain sides and captive cover
screws of slightly magnetic
stainless steel.
Available in 11 sizes and also
in two different depth
alternatives.
They are used for example to
protect sensitive electronic,
electric and pneumatic
components and as terminal
box.
Materials
PC
AB
END PC P 050504 G
Series
Material
Side Wall characteristics
Dimensions
Additional characteristics
Approvals
Side Wall Characteristics
Polycarbonate
ABS
P
Plain sides
Additionals Characteristics
T
Transparent Cover
G
Grey Cover RAL 7035
(always polycarbonate)
Dimensions
050504
050704
080806
080809
081206
081209
081606
081609
121206
121209
121609
122009
152008
162409
162412
233009
233011
Width(mm)
Heigth(mm)
53
53
80
80
80
80
80
80
120
120
120
120
150
160
160
230
230
55
63
82
82
120
120
160
160
122
122
160
200
200
240
240
300
300
Depth(mm) Inner Depth(mm)*
36
36
56
86
56
86
56
86
56
86
91
86
76
91
121
86
111
27.5
25.0
42.0
72.0
42.0
72.0
42.0
72.0
42.0
72.0
77.5
72.0
62.0
77.5
107.5
72.5
97.5
* From fastening points to the inner surface of the cover.
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
9
Polycarbonate / ABS Enclosures
END series
IP66/67
Technical Data
PC
Degree of protection EN 60529
Impact resistance
EN 62262 (+35°C / -25°C)
Operating temperature
Flammability UL 94
Standard colour
Transparent cover
Cover gasket
Cover screws
Polycarbonate
IP 66/67
IK 08/IK 08
-50 °C...+100 °C
V-2
grey RAL 7035
polycarbonate
PUR (polyurethane)
stainless steel
AB
Degree of protection EN 60529
Impact resistance
EN 62262 (+35 °C / -25 °C)
Operating temperature
Flammability UL 94
Standard colour
Transparent cover
Cover gasket
Cover screws
ABS
IP 66/67
IK 07/IK 06
-40°C...+60°C
HB
grey RAL 7035
polycarbonate
PUR (polyurethane)
stainless steel
Accessories
Adapted for enclosure
with Dimension Code
Mounting Plate 1.5mm thick
galvanizated steel
DIN rail
(W = 15mm)
DIN rail
(W = 35mm)
050504
050704
080806
080809
081206
081209
081606
081609
121206
121209
121609
122009
152009
162409
162412
233009
233011
ENDMP0808
ENDMP0808
ENDMP0812
ENDMP0812
ENDMP0816
ENDMP0816
ENDMP1212
ENDMP1212
ENDMP1216
ENDMP1220
ENDMP1520
ENDMP1624
ENDMP1624
ENDMP2330
ENDMP2330
ENDR15016-4
ENDR15038-4
ENDR15058-4
ENDR15058-4
ENDR15096-4
ENDR15096-4
ENDR15136-4
ENDR15136-4
ENDR15096-4
ENDR15096-4
ENDR15136-4
-
ENDR35058-4
ENDR35058-4
ENDR35096-4
ENDR35096-4
ENDR35136-4
ENDR35136-4
ENDR35096-4
ENDR35096-4
ENDR35136-4
ENDR35176-4
ENDR35160-4
ENDR35215-4
ENDR35215-4
ENDR35275-4
ENDR35275-4
Accessories for all the enclosures
Hinge, pair, Polycarbonate
Fastering lug, Set, Polycarbonate
Cover plug, Polycarbonate
Cover screw, short
Set, incl. 4 cover screws ENDLS1 + 4 mount. screws ENDMS1
Set, incl. 6 cover screws ENDLS1 + 4 mount. screws ENDMS1
Cover screws, long, for over 100mm deep models
Cover screws TORX TX20
Mounting screws
Drain water plug, IP44, rubber
Hinge, pair, Polycarbonate
10
Fastering lug, Set, Polycarbonate
27 x 28 x 10mm
33 x 21 x 9.5mm
3 x 18mm
3 x 18mm
3 x 18mm
3 x 50mm
3 x 18mm
3 x 7mm
Ø 33mm
ENDSHI1
ENDFL1
ENDCP1
ENDLS1
ENDLSA1-04
ENDLSA1-06
ENDLS2
ENDLS3
ENDMS1
ENDWP1
Drain water plug, IP44, rubber
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Polycarbonate / ABS Enclosures
ENS series
IP66/67
• Polycarbonate and ABS
• Grey RAL 7035
• Temperature Resistant in ABS : -40°C to +60°C
• Temperature Resistant in Polycarbonate: -50°C to +100°C
• Degree of protection: IP66/67
• EN62208
• CE
Ordering Key
Product Description
The enclosure of the ENS
serie is a small to medium
size of general purpose
enclosure made of high
quality
thermoplastics:
polycarbonate and ABS.
The polycarbonate enclosures
are
with
pre-pressed
knockouts, Pg or metric. The
material of the base is
reinforced with fibreglass to
add rigidity to the walls and
to make it easier to knock out
cable entries. The enclosures
are also available with plain
sides for individual machining
of holes; alternative material
for plain-sided enclosures is
ABS.
The cover should be grey or
transparent. The transparent
cover
is
always
polycarbonate.
Materials
PC
AB
ENS PC K 081308 T
Series
Material
Side Wall characteristics
Dimensions
Additional characteristics
Approvals
Side Wall Characteristics
Polycarbonate
ABS
P
M*
K*
Plain sides
Metric Knock outs in the base
PG knock outs
Additionals Characteristics
T
Transparent Cover
G
Grey Cover RAL 7035
* Options M and K are not available for
ABS material
(always polycarbonate)
Dimensions
081308
081310
081313
131308
131310
131313
131808
131810
131813
131815
181808
181810
181813
181815
182508
182510
182515
Width(mm)
Heigth(mm)
75
75
75
125
125
125
125
125
125
125
175
175
175
175
175
175
175
125
125
125
125
125
125
175
175
175
175
175
175
175
175
250
250
250
Depth(mm) Inner Depth(mm)*
75
100
125
75
100
125
75
100
125
150
75
100
125
150
75
100
150
60.5
85.5
110.5
60.5
85.5
110.5
60.5
85.5
110.5
135.5
60.5
85.5
110.5
135.5
60.5
85.5
135.5
* From fastening points to the inner surface of the cover.
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
11
Polycarbonate / ABS Enclosures
ENS series
IP66/67
Technical Data
PC
Degree of protection EN 60529
Impact resistance
EN 62262 (+35°C / -25°C)
Operating temperature
Flammability UL 94
Standard colour
Transparent cover
Cover gasket
Cover screws
Polycarbonate
IP 66/67
IK 08/IK 08
-50 °C...+100 °C
V-2...5VA
grey RAL 7035
polycarbonate
PUR (polyurethane)
Polyamide
AB
Degree of protection EN 60529
Impact resistance
EN 62262 (+35 °C / -25 °C)
Operating temperature
Flammability UL 94
Standard colour
Transparent cover
Cover gasket
Cover screws
ABS
IP 66/67
IK 07/IK 06
-40°C...+60°C
HB
grey RAL 7035
polycarbonate
PUR (polyurethane)
Polyamide
Mounting Adapters
Adapted for enclosure
with Dimension Code
Mounting Plate 1.5mm thick
galvanized steel
DIN rail (W = 35mm)
to mounting on short size (W)
DIN rail (W = 35mm)
to mounting on long size (H)
081308
081310
081313
131308
131310
131313
131808
131810
131813
131815
181808
181810
181813
181815
182508
182510
182515
ENSMP0813
ENSMP0813
ENSMP0813
ENSMP1313
ENSMP1313
ENSMP1313
ENSMP1318
ENSMP1318
ENSMP1318
ENSMP1318
ENSMP1818
ENSMP1818
ENSMP1818
ENSMP1818
ENSMP1825
ENSMP1825
ENDR35040-4
ENDR35040-4
ENDR35040-4
ENDR35090-4
ENDR35090-4
ENDR35090-4
ENDR35090-4
ENDR35090-4
ENDR35090-4
ENDR35090-4
ENDR35140-4
ENDR35140-4
ENDR35140-4
ENDR35140-4
ENDR35140-4
ENDR35140-4
ENDR35140-4
ENDR35090-4
ENDR35090-4
ENDR35090-4
ENDR35140-4
ENDR35140-4
ENDR35140-4
ENDR35140-4
ENDR35215-4
ENDR35215-4
ENDR35215-4
Accessories
Hinge, pair, Polycarbonate
Fastering lug, Set, Polycarbonate
Insert for Pods, Brass
Insert, set of 4 pcs
Mounting Screws for plates and rails, steel
Cover Plug, short, for 25mm cover, polyethylene
Cover Plug, long, for 50mm cover, polyethylene
Cover Plug, short, for 75 and 100mm covers, polyethylene
Cover screw, short, steel
Cover screw, long, for 50mm covers, steel
Set, incl. 4 short cover screws and 4 mounting screws
Set, incl. 4 long cover screws for 50mm cover and 4 mounting screws
Cover screw wing head part
Drain water plug, IP44, rubber
Cover screw, short, steel, Cover screw wing head part
and Cover Plug, short, for 25mm cover, polyethylene
12
Hinge, pair, Polycarbonate
28 x 28
15 x 30
M2
M2
4x8
Ø11 x 12mm
Ø12 x 36.5mm
Ø11.5 x 12mm
11 x 35
11 x 60
11 x 35
11 x 60
11 x 17
Ø 33mm
ENDSHI1
ENSFL1
ENSBI1
ENSBIA1-04
ENSMS1
ENSCP08
ENSCP10
ENSCP1315
ENSLS35
ENSLS60
ENSLSA35-04
ENSLSA60-04
ENSLW1
ENDWP1
Darin water plug, IP44, rubber
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Polycarbonate / ABS Enclosures
ENO/ENC series
IP66/67
• Polycarbonate and ABS
• Grey RAL 7035
• Temperature Resistant in ABS : -40°C to +60°C
• Temperature Resistant in Polycarbonate: -50°C to +100°C
• Degree of protection: IP66/67
• EN62208
• CE
Product Description
The enclosures of the
ENO/ENC series are a
medium to large size of
general purpose enclosures
made of high quality
t h e r m o p l a s t i c s :
polycarbonate and ABS.
They are with plain sides;
three sizes are also available
with pre-pressed metric
knock-outs.
The cover should be grey or
transparent. The transparent
cover is always polycarbonate.
The 185 mm deep enclosure
is equipped with a 55mm
deep extension frame.
Special features of the series
are the possibility to mount
the cover onto the back of
the base and adjustable
elevators for the base corner
slots allowing mounting of
plates and panels at any
height.
Series
ENO1
ENC2
1
2
Ordering Key
ENO PC P 202013 G
Series
Material
Side Wall characteristics
Dimensions
Additional characteristics
Approvals
Materials
Plain sides/metric knock outs
Flange knock outs
PC
AB
Polycarbonate
ABS only plain sides
Available only with P and M side wall
Available only with F side wall
Additionals Characteristics
Side Wall Characteristics
T
P
M3
F3
Transparent Cover
(always polycarbonate)
G
Grey Cover RAL 7035
3
Plain sides
Metric Knock outs in the base
Flange knock out
Options M and F are not available for ABS material
Dimensions
202013
202018
203013
203018
204013
204018
303013
303018
304013
304018
306013
306018
406013
406018
4
Width(mm)
Heigth(mm)
200
200
200
200
200
200
300
300
300
300
300
300
400
400
200
200
300
300
400
400
300
300
400
400
600
600
600
600
Depth(mm) Inner Depth(mm)4
132
185
132
185
132
185
132
185
132
185
132
185
132
185
115.0
170.0
115.0
170.0
115.0
170.0
115.0
170.0
115.0
170.0
115.0
170.0
115.0
170.0
From fastening points to the inner surface of the cover.
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
13
Polycarbonate / ABS Enclosures
ENO/ENC series
IP66/67
Technical Data
PC
Degree of protection EN 60529
Impact resistance
EN 62262 (+35°C / -25°C)
Operating temperature
Flammability UL 94
Standard colour
Transparent cover
Cover gasket
Cover screws
Polycarbonate
IP 66/67
AB
Degree of protection EN 60529
Impact resistance
EN 62262 (+35 °C / -25 °C)
Operating temperature
Flammability UL 94
Standard colour
Transparent cover
Cover gasket
Cover screws
IK 08/IK 08
-50 °C...+100 °C
V-2...5VA
grey RAL 7035
polycarbonate
PUR (polyurethane)
Polyamide
ABS,
IP 66/67
IK 07/IK 06
-40°C...+60°C
HB
grey RAL 7035
polycarbonate
PUR (polyurethane)
Plyamide
Accessories
Adapted for enclosure
with Dimension Code
Mounting Plate
1.5mm thick
galvanized steel
DIN rail (W = 35mm)
to mount to
short side (W)
DIN rail (W = 35mm)
to mount to
long side (H)
Bases
polycarbonate
flange knock outs
202013
202018
203013
203018
204013
204018
303013
303018
304013
304018
306013
306018
406013
406018
ENOMP2020
ENOMP2020
ENOMP2030
ENOMP2030
ENOMP2040
ENOMP2040
ENOMP3030
ENOMP3030
ENOMP3040
ENOMP3040
ENOMP3060
ENOMP3060
ENOMP4060
ENOMP4060
ENDR35150-5
ENDR35150-5
ENDR35150-5
ENDR35150-5
ENDR35150-5
ENDR35150-5
ENDR35250-5
ENDR35250-5
ENDR35250-5
ENDR35250-5
ENDR35250-5
ENDR35250-5
ENDR35350-5
ENDR35350-5
ENDR35250-5
ENDR35250-5
ENDR35350-5
ENDR35350-5
ENDR35350-5
ENDR35350-5
-
ENCPCF202010B
ENCPCF202010B
ENCPCF203010B
ENCPCF203010B
ENCPCF204010B
ENCPCF204010B
ENCPCF303010B
ENCPCF303010B
ENCPCF304010B
ENCPCF304010B
ENCPCF306010B
ENCPCF306010B
ENCPCF406010B
ENCPCF406010B
Adapted for enclosure
with Dimension Code
Bases
polycarbonate
plain sides
Bases
ABS
plain sides
Bases
polycarbonate
metric knock outs
202013
202018
203013
203018
204013
204018
303013
303018
304013
304018
306013
306018
406013
406018
ENOPCP202010B
ENOPCP202010B
ENOPCP203010B
ENOPCP203010B
ENOPCP204010B
ENOPCP204010B
ENOPCP303010B
ENOPCP303010B
ENOPCP304010B
ENOPCP304010B
ENOPCP306010B
ENOPCP306010B
ENOPCP406010B
ENOPCP406010B
ENOABP202010B
ENOABP202010B
ENOABP203010B
ENOABP203010B
ENOABP204010B
ENOABP204010B
ENOABP303010B
ENOABP303010B
ENOABP304010B
ENOABP304010B
ENOABP306010B
ENOABP306010B
ENOABP406010B
ENOABP406010B
ENOPCM303010B
ENOPCM303010B
ENOPCM304010B
ENOPCM304010B
ENOPCM306010B
ENOPCM306010B
-
14
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Polycarbonate / ABS Enclosures
ENO/ENC series
IP66/67
Accessories
Adapted for enclosure
with Dimension Code
202013
203013
204013
303013
304013
306013
406013
and
and
and
and
and
and
and
202018
203018
204018
303018
304018
306018
406018
Adapted for enclosure
with Dimension Code
202013
203013
203013
204013
204013
204013
303013
303013
304013
304013
304013
304013
306013
306013
406013
406013
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
and
202018
203018
203018
204018
204018
204018
303018
303018
304018
304018
304018
304018
306018
306018
406018
406018
Extension frame
depth 55mm
polycarbonate
Cover
Grey
polycarbonate
Cover
transparent
polycarbonate
Cover
Grey
ABS
ENOPCP202006E
ENOPCP203006E
ENOPCP204006E
ENOPCP303006E
ENOPCP304006E
ENOPCP306006E
ENOPCP406006E
ENOPCG202003L
ENOPCG203003L
ENOPCG204003L
ENOPCG303003L
ENOPCG304003L
ENOPCG306003L
ENOPCG406003L
ENOPCT202003L
ENOPCT203003L
ENOPCT204003L
ENOPCT303003L
ENOPCT304003L
ENOPCT306003L
ENOPCT406003L
ENOABG202003L
ENOABG203003L
ENOABG204003L
ENOABG303003L
ENOABG304003L
ENOABG306003L
ENOABG406003L
Front panel sets
PP, RAL 7035
14.5mm profile
Front panel sets
PP, RAL 7035
32.5mm profile
ENOFP22A114
ENOFP32A114
ENOFP23A214
ENOFP42A114
ENOFP24A214
ENOFP24A314
ENOFP33A114
ENOFP33A214
ENOFP43A114
ENOFP34A214
ENOFP43A214
ENOFP34A314
ENOFP36A414
ENOFP36B314
ENOFP46A414
ENOFP46B314
ENOFP22A132
ENOFP32A132
ENOFP23A232
ENOFP42A132
ENOFP24A232
ENOFP24A332
ENOFP33A132
ENOFP33A232
ENOFP43A132
ENOFP34A232
ENOFP43A232
ENOFP34A332
ENOFP36A432
ENOFP36B332
ENOFP46A432
ENOFP46B332
Note:
DIN openings and
modules
1 row (6 modules)
1 row (12 modules)
2 row (6 modules)
1 row (17 modules)
2 row (6 modules)
3 row (6 modules)
1 row (12 modules)
2 row (12 modules)
1 row (17 modules)
2 row (12 modules)
3 row (17 modules)
3 row (12 modules)
4 row (12 modules)
3 row (12 modules)
4 row (17 modules)
3 row (17 modules)
Front panels
separate PP, Ral 7035
closed
Front panels
Aluminium
closed
ENOFP22
ENOFP23
ENOFP22A
ENOFP23A
ENOFP24
ENOFP24A
ENOFP33
ENOFP33A
ENOFP34
ENOFP34A
ENOFP36
ENOFP36A
ENOFP46
ENOFP46A
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
15
Polycarbonate / ABS Enclosures
ENO/ENC series
IP66/67
Accessories
Adapted for enclosure
with Dimension Code
Hinged* front
panels PP,
RAL 7035
Hinged* front
panels
Aluminium
202013
203013
203013
204013
204013
303013
and
and
and
and
and
and
202018
203018
203018
204018
204018
303018
ENOHFP22
ENOHFP23
ENOHFP32
ENOHFP24
ENOHFP42
ENOHFP33
ENOHFP22A
ENOHFP23A
ENOHFP32A
ENOHFP24A
ENOHFP42A
ENOHFP33A
Modular covers Modular covers Modular covers
smoke grey
smoke grey
smoke grey
window PC, IP65 window PC, IP65 window PC, IP65
closed front
DIN slits
open front
ENOPCG33CS ENOPCG33-125-1DS ENOPCG33OS
304013
304013
306013
306013
406013
406013
and
and
and
and
and
and
304018
304018
306018
306018
406018
406018
ENOHFP34
ENOHFP43
ENOHFP36
ENOHFP63
ENOHFP46
ENOHFP64
ENOHFP34A
ENOHFP43A
ENOHFP36A
ENOHFP63A
ENOHFP46A
ENOHFP64A
ENOPCG34CS
ENOPCG34CS
ENOPCG36CS
ENOPCG36CS
-
front:1DIN slit 12 modules
ENOPCG34-125-2DS
front:2DIN slit 12 modules
ENOPCG36-150-3DS
front:3DIN slit 12 modules
-
ENOPCG34OS
ENOPCG34OS
ENOPCG36OS
ENOPCG36OS
-
* first digit defines the hinged side
Accessories for all the enclosures
Fastening lug, set
Corner elevator incl. M5 bolt
Corner elevator, set of 4 pcs
Threaded bushing for cover screw when cover mounted on the back
Set, incl. 4 cover screws ENOLS42 + 4 threaded bushings ENOTS1
Mounting screw for rails and plates
Brass insert for mounting pod, brass
Brass insert, set of 4 pcs
Cover plug, polyethylene
Cover lock incl. 2 keys and mounting instructions
Key separately for OKL1
15 mm spacer incl. M5 screw, steel
15 mm spacer, set of 4 pcs
20 mm spacer incl. M5 screw, steel
20 mm spacer, set of 4 pcs
30 mm spacer incl. M5 screw, steel
30 mm spacer, set of 4 pcs
Cover screw, slotted/cross head, sealable
Cover screw, springloaded, cross head
Hinged cover screw, slot/cross head, blue, polyamide
Hinged cover screw, wing head, blue, polyamide
Fastening lug, set
16
15 to 30mm spacer incl. M5 screw, steel
19 x 40 x 35.5mm
19/19 x 14mm
20/26 x 14mm
18/30 Ø 16mm
17 x 30/18mm
5 x 10mm
M3
M3
11 x Ø 15/17mm
Ø 15.7/Ø 14.3mm
49 x 20mm
15 x 8mm
15 x 8mm
20 x 8mm
20 x 8mm
30 x 8mm
30 x 8mm
14 x 42mm
14 x 62mm
14 x 96mm
14 x 113mm
Threaded bushing for cover screw when
cover mounted on the back of the base
ENOFL1
ENOEL1
ENOELA1-04
ENOTS1
ENOTSA1-04
ENOMS1
ENOBI1
ENOBIA1-04
ENOCP1
ENOKL1
ENOKL442
ENOBS15
ENOBS15-04
ENOBS20
ENOBS20-04
ENOBS30
ENOBS30-04
ENOLS42
ENPLS63
ENOLSH1
ENOLWH1
Hinged cover screw, slot/cross head, blue,
polyamide
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Polycarbonate / ABS Enclosures
ENO/ENC series
IP66/67
Accessories for all the enclosure
Cover screw, wing head
Cover screw, DIN 3 head
Key for DIN head screw OLT42
Extension frame screw
Hinge, pair incl. mounting instructions
Hinge, pair incl. 2 cover plugs
Inspection Window IP65 for 2 modules, PC
Inspection Window IP65 for 4 modules, PC
Inspection Window IP65 for 6 modules, PC
Inspection Window IP65 for 8 modules, PC
Inspection Window IP65 for 10 modules, PC
Inspection Window IP65 for 12 modules, PC
Inspection Window IP65, opening, incl. screws, PC
Ventilation device, IP34, PA
Ventilation device, IP44, PA
Drain water plug, IP44, rubber
Key for DIN head screw
Cover screw, wing head
14 x 55mm
14 x 42mm
50 x 50mm
Ø17 x 67mm
40 x 50 x 16.5mm
40 x 50 x 16.5mm
67 x 59mm
67 x 94mm
67 x 130mm
67 x 163mm
67 x 200mm
67 x 233mm
113 x 153mm
25 x 28mm
30.5 x 69mm
Ø 33mm
Drain water plug IP44, rubber
Cover plates
F1 size excl. gasket, PC/ABS
F2 size incl. PUR gasket, PC
Gland flanges
F1 size, excl. gasket, 3 x Pg16, PC/ABS
F1 size, excl. gasket, 3 x Pg21, PC/ABS
F1 size, excl. gasket, 1 x Pg29, PC/ABS
F1 size, excl. gasket, 3 x M20, PC/ABS
F1 size, excl. gasket, 3 x M25, PC/ABS
F1 size, excl. gasket, 1 x M32, PC/ABS
F2 size, incl. PUR gasket, 3 x Pg21 + 4 x Pg16, PC
F2 size, incl. PUR gasket, 2 x Pg29 + 6 x Pg16, PC
F2 size, incl. PUR gasket, 2 x Pg36 + 4 x Pg16, PC
F2 size, incl. PUR gasket, 8 x Pg16, PC
F2 size, incl. PUR gasket, 10 x Pg11, PC
F2 size, incl. PUR gasket, 4 x M20 + 1 x M25 + 2 x M32, PC
F2 size, incl. PUR gasket, 6 x M20 + 1 x M32 + 1 x M40, PC
F2 size, incl. PUR gasket, 4 x M20 + 2 x M40, PC
F2 size, incl. PUR gasket, 8 x M20, PC
F2 size, incl. PUR gasket, 10 x M16, PC
Knock Out Flanges
F2 size, incl. PUR gasket, 7 x Pg11 + 7 x pg9/16, PC
F2 size, incl. PUR gasket, 2 x Pg21/29/36 + 2 x pg9/16+ 1 x pg11, PC
F2 size, incl. PUR gasket, 5 x Pg16/21 + 2 x Pg11, PC
F2 size, incl. PUR gasket, 7 x M16 + 7 x M12/20
F2 size, incl. PUR gasket, 2 x M20/32/50 + 2 x M12/20 + 2 x M16
F2 size, incl. PUR gasket, 5 x M20/32 + 2 x M16 + 1 x M12/20
F2 size, incl. PUR gasket
ENPWR1857
ENF2C50E
ENOLW55
ENOLT42
ENOLT42KEY
ENOES1
ENOHI1
ENOHICP1
ENVMA2
ENVMA4
ENVMA6
ENVMA8
ENVMA10
ENVMA12
ENVMA1519
ENVDRI18
ENVDRI29
ENDWP1
Inspection Window IP65 for 10 modules, PC
ENF1151
ENF2251
ENF1152
ENF1153
ENF1154
ENF1165
ENF1166
ENF1167
ENF2157
ENF2158
ENF2159
ENF2160
ENF2161
ENF2168
ENF2169
ENF2170
ENF2171
ENF2172
ENF2252
ENF2253
ENF2254
ENF2255
ENF2256
ENF2257
F2 size, incl. PUR gasket
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
17
Polycarbonate / ABS Enclosures
ENO/ENC series
IP66/67
Accessories for all the enclosure
Membran Flanges
F1 size, for 5 x Ø 7-30mm cables, EPDM
F2 size, for 25 x Ø 5-26mm cables, EPDM
F2 size, for 35 x Ø 5-26mm cables, EPDM
F2 size, for 3 x Ø 24-60mm cables, EPDM
F1 size, excl. gasket, 3 x Ø 21 + 4 x Ø 15mm, TPE
F1 size, excl. gasket, 4 x Ø 16 + 6 x Ø 13mm, TPE
F2 size, excl. gasket, 3 x Ø 30 + 6 x Ø 18 + 16 x Ø 14mm, TPE
F2 size, excl. gasket, 9 x Ø 18 + 24 x Ø 14mm, TPE
Cable spreader
F2 size, incl. gasket, 1 x cable Ø 27-66mm
Other flange accessories, F1 and F2 sizes
50 mm extension frame for F2 flange, PC
Self-adhesive flange gasket, F1 size
Self-adhesive flange gasket, F2 size
Flange bolt set, F1 size, steel bolt with plastic head, M6 x 20
Flange bolt set, F2 size, steel bolt with plastic head, M8 x 20
Flange bolt set, F2 size, steel bolt with plastic head + steel connector, M8 x 20
Flange/base support for size F2, PA
Strain relief, galvanized steel
300 mm side/for 1 cable
300 mm side/for 2 cables
400 mm side/for 1 cable
400 mm side/for 2 cables
Membrane Flange, support and bolts
Flange steel bolt with plastic head M8 x
F2 size, incl. gasket, 1 x cable Ø 27-66mm
ENF1201
ENF2202
ENF2203
ENF2204
ENF1155
ENF1156
ENF2162
ENF2163
ENF2CE-1
ENF2C50E
ENF1G
ENF2G
ENF1SS20
ENF2SS20
ENF2SS20L
ENPMR1857
ENKJ8-13
ENKJ8-23
ENKJ8-14
ENKJ8-24
Strain-Reliefs are made of galvanized steel.
20 and flange support
18
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Polycarbonate Enclosures
ENW series
IP66/67
• Polycarbonate
• Grey RAL 7035
• Temperature Resistant in Polycarbonate: -50°C to +100°C
• Degree of protection: IP66/67
• Preassembled hinges and quick release latches
• EN62208
• CE
Ordering Key
Product Description
The ENW series is a
wallmounted cabinets made
of polycarbonate.
The enclosure is always
delivered mounting screws
included,
pre-assembled
hinges and quick release
latches.
It can be easily locked with a
padlock
(without
any
accessories) The enclosures
are
manufactured
of
polycarbonate,
standard
colour grey RAL 7035, cover
grey or transparent.
The 185 mm deep enclosure
is built by using an extension
frame.
Materials
PC
ENW PC P 202013 G
Series
Material
Side Wall characteristics
Dimensions
Additional characteristics
Approvals
Side Wall Characteristics
Polycarbonate
P
Plain sides
Additionals Characteristics
T
Transparent Cover
G
Grey Cover RAL 7035
(always polycarbonate)
Dimensions
202013
202018
203013
203018
204013
204018
303013
303018
304013
304018
306013
306018
406013
406018
Width(mm)
Heigth(mm)
200
200
200
200
200
200
300
300
300
300
300
300
400
400
200
200
300
300
400
400
300
300
400
400
600
600
600
600
Depth(mm) Inner Depth(mm)*
132
185
132
185
132
185
132
185
132
185
132
185
132
185
115.0
170.0
115.0
170.0
115.0
170.0
115.0
170.0
115.0
170.0
115.0
170.0
115.0
170.0
* From fastening points to the inner surface of the cover.
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
19
Polycarbonate Enclosures
ENW series
IP66/67
Technical Data
PC
Degree of protection EN 60529
Impact resistance
EN 62262 (+35°C / -25°C)
Operating temperature
Flammability UL 94
Standard colour
Cover gasket
Polycarbonate
IP 66/67
IK 08/IK 08
-50 °C...+100 °C
V-2...5VA
grey RAL 7035
PUR (polyurethane)
Accessories
Adapted for enclosure
with Dimension Code
Mounting Plate 1.5mm thick
galvanizated steel
202013
202018
203013
203018
204013
204018
303013
303018
304013
304018
306013
306018
406013
406018
ENOMP2020
ENOMP2020
ENOMP2030
ENOMP2030
ENOMP2040
ENOMP2040
ENOMP3030
ENOMP3030
ENOMP3040
ENOMP3040
ENOMP3060
ENOMP3060
ENOMP4060
ENOMP4060
DIN rail (W = 35mm)
to mounting to
short size
ENDR35150-5
ENDR35150-5
ENDR35150-5
ENDR35150-5
ENDR35150-5
ENDR35150-5
ENDR35250-5
ENDR35250-5
ENDR35250-5
ENDR35250-5
ENDR35250-5
ENDR35250-5
ENDR35350-5
ENDR35350-5
DIN rail (W = 35mm)
to mounting to
long size
ENDR35150-5
ENDR35150-5
ENDR35250-5
ENDR35250-5
ENDR35350-5
ENDR35350-5
ENDR35250-5
ENDR35250-5
ENDR35350-5
ENDR35350-5
ENDR35250-5
ENDR35250-5
ENDR35350-5
ENDR35350-5
Accessories for all the enclosures
Fastening lug, set
Cover lock incl. 2 keys and mounting instructions
Brass insert, set of 4 pcs M3
15mm spacer, set of 4 pcs
20mm spacer, set of 4 pcs
30mm spacer, set of 4 pcs
Cover elevator, set of 4 pcs
Set, incl. 4 cover screws ENOLSS42 and 4 threaded bushings ENOTS1
Drain water plug IP44/rubber
Fastening lug, set
20
15 to 30mm spacer incl. M5 screw, steel
ENOFL1
ENOKL1
ENOBIA1-04
ENOBS15-04
ENOBS20-04
ENOBS30-04
ENOELA1-04
ENOTSA1-04
ENDWP1
Drain water plug IP44, rubber
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Polycarbonate / ABS Enclosures
MUMB-R series
IP65
• Polycarbonate and ABS
• Grey RAL 7035
• Temperature Resistant in ABS : -40°C to +60°C
• Temperature Resistant in Polycarbonat: -50°C to +100°C
• Degree of protection: IP 65
• 4 unloseable cover screws
• oil and petroleum resistant
• EN62208
• CE
Ordering Key
Product Description
The enclosure of the
MUMB-R serie is ideal for
controlling and display
technique. It is equipped
with Aluminium front plate,
neoprene cover seal and 4
unloseable stainless steel
cover screws.
The fastening grooves are
situated outside the seal
range.
The neoprene cover seal is
resistant against oil and
petroleum.
MUMB PC 201268R
Series
Material
Dimensions
Approvals
Material
PC
AB
Dimensions
Polycarbonate
ABS
201268R
201288R
241211R
241283R
Width
(mm)
Heigth
(mm)
Depth
(mm)
200
200
240
240
120
120
120
120
68
88
113
83
Accessories
Adapted for enclosure
with Dimension Code
Mounting rail
Mounting plate
Rubber feet 4 pcs
Wall mounting
brackets
202168 R
201288 R
241211 R
241283 R
MUMBMT200RTS
MUMBMT200RTS
MUMBMT240RTS
MUMBMT200RTS
MUMBMT20M
MUMBMT20M
MUMBMT24M
MUMBMT24M
MUMBMTFU
MUMBMTFU
MUMBMTFU
MUMBMTFU
MUMBMTWL
MUMBMTWL
MUMBMTWL
MUMBMTWL
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
21
Aluminium Enclosures
MUMBA series
IP65
• Standard colour grey RAL 7001
• Operating temperature: -40°C to +110°C
• Degree of protection: IP65
• Lighter than steel
• High impact resistance
• Good resistance against solvents
• Wide temperature resistance range
• Excellent corrosion resistance
• EN62208
• CE
Ordering Key
Product Description
The enclosures of MUMBA
series, made of aluminium
are universal, stabile and
easily adapted “Packaging”
for electrical, electronic and
pneumatic components.
They are very sturdy and
easily
mechanically
machined and can be
painted to the customers.
Cover has always plain sides
and the screws are of
stainless steel.
This range meets the
requirements of the machine
industry, as regards resistance
against solvents, petrol and
oil. Special features are
excellent temperature and
impact resistance.
Moreover, the relative weight
of aluminium is only about a
quarter that of steel.
MUMB A 504530
Series
Material
Dimensions
Approvals
Materials
A
Aluminium (Al)
Dimensions
504530
606030
606045
906030
906045
156030
156045
708050
708055
128050
128055
128012
178055
258050
258065
121265
121275
121280
121290
221265
22
Width
(mm)
50
58
58
98
98
150
150
75
75
125
125
125
175
250
250
122
122
122
122
220
Heidth
(mm)
45
64
65
64
64
64
64
80
80
80
80
80
80
80
80
120
120
120
120
120
Depth
(mm)
30
34
45
35
45
34
45
54
57
54
57
125
91
54
65
65
75
80
90
65
221275
221280
221290
361280
161690
261665
261690
361690
561690
202311
202318
282311
332311
332318
402311
403111
403118
602311
603111
603118
Width
(mm)
220
220
220
360
160
260
260
360
560
200
200
280
330
330
400
400
400
600
600
600
Heidth
(mm)
120
120
120
122
160
160
160
160
160
230
230
230
230
230
230
310
310
230
310
310
Depth
(mm)
75
80
90
80
90
65
90
90
90
110
180
110
110
180
110
110
180
110
110
180
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Aluminium Enclosures
MUMBA series
IP65
Technical Data
Al
Degree of protection EN 60529
Impact strength
Operating temperature
Standard colour
Cover gasket
Cover screws
Certificates
Aluminium
IP 65
7 Nm
-40°C...+110°C
grey RAL 7001
neoprene
stainless steel AISI 304
CE
Accessories
Adapted for enclosure
with Dimension Code
Mounting rail
Mounting plate
Wall mounting
brackets
External hinge
504530
606030
606045
906030
906045
156030
156045
708050
708055
128050
128055
128012
178055
258050
258065
121265
121275
121280
121290
221265
221275
221280
221290
361280
161690
261665
261690
361690
561690
202311
202318
282311
332311
332318
402311
403111
403118
602311
603111
603118
MUMBA075TS
MUMBA125TS
MUMBA125TS
MUMBA125TS
MUMBA175TS
MUMBA250TS
MUMBA250TS
MUMBA122TS
MUMBA122TS
MUMBA122TS
MUMBA122TS
MUMBA220TS
MUMBA220TS
MUMBA220TS
MUMBA220TS
MUMBA360TS
MUMBA160TS
MUMBA260TS
MUMBA260TS
MUMBA360TS
MUMBA560TS
MUMBA200TS
MUMBA200TS
MUMBA280TS
MUMBA330TS
MUMBA330TS
MUMBA400TS
MUMBA400TS
MUMBA400TS
MUMBA600TS
MUMBA600TS
MUMBA600TS
MUMBA7080M
MUMBA7080M
MUMBA1280M
MUMBA1280M
MUMBA1280M
MUMBA1780M
MUMBA1212M
MUMBA1212M
MUMBA1212M
MUMBA1212M
MUMBA2212M
MUMBA2212M
MUMBA2212M
MUMBA2212M
MUMBA3612M
MUMBA1616M
MUMBA2616M
MUMBA2616M
MUMBA3616M
MUMBA5616M
MUMBA2023M
MUMBA2023M
MUMBA2823M
MUMBA3323M
MUMBA3323M
MUMBA4023M
MUMBA4031M
MUMBA4031M
MUMBA6023M
MUMBA6031M
MUMBA6031M
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAWL
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
MUMBAGA
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
23
Steel Enclosures
ENE series
IP66/55 (with 2 doors)
•
•
•
•
•
•
•
•
•
•
Ordering Key
Product Description
The enclosures of the ENE
series are enclosures made
of polyester painted mild
steel, standard colour is grey
RAL 7032, or unpainted
stainless steel AISI 304.
The models of polyester
painted enclosures have
flanges; while models made
of stainless steel have plain
sides.
The standard cabinets always
feature a righthand hinges.
The door can easily be
changed from right to left
hand hinged even as the last
operation at the installation
site.
Enclosure made of acidproof steel AISI 316 are
available on request.
The mounting plate is
included in all standard
enclosure deliveries.
Different sizes are also
available.
Material
FEF
ENE FEF 808030 D
Series
Material and Openings
Dimensions
Additional characteristics
Approvals
Additional Characteristics
Painted steel with
Flange opening
Stainless steel with
Plain sides
SSP
Stainless steel AISI 304, unpainted
Polyester painted mild steel grey RAL 7032
Degree of protection: IP66/55
Mounting plate included
Lock device included
High impact resistance (10J)
Excellent corrosion resistance
Excellent resistance to UV radiation
EN62208
CE
D
two doors
(available only with dimensions:
808030, 8010030, 10010030,
10012030)
Dimensions
203015
302015
303015
303020
304020
403015
403020
404020
404030
405020
406020
406030
505020
505030
506030
24
Width Heigth Depth Inner
(mm) (mm) (mm) Depth
(mm)
200 300 150 139
300 200 150 139
300 300 150 139
300 300 200 189
300 400 200 189
400 300 150 139
400 300 200 189
400 400 200 189
400 400 300 289
400 500 200 189
400 600 200 189
400 600 300 289
500 500 200 189
500 500 300 289
500 600 300 289
604020
604030
606020
606030
608020
608030
6010030
6012030
806030
808020
808030
8010030
8012030
1008030
10010030
10012030
Width Heigth Depth Inner
(mm) (mm) (mm) Depth
(mm)
600 400 200 189
600 400 300 289
600 600 200 189
600 600 300 289
600 800 200 189
600 800 300 289
600 1000 300 289
600 1200 300 289
800 600 300 289
800 800 200 189
800 800 300 289
800 1000 300 289
800 1200 300 289
1000 800 300 289
1000 1000 300 289
1000 1200 300 289
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Steel Enclosures
ENE series
IP66/55 (with 2 doors)
Technical Data
Polyester painted steel
Degree of protection EN 60529
Impact resistance
EN 62262 (+35°C / -25°C)
Standard colour
Door gasket
Certificates
IP 66 (with 2 doors IP55)
IK 09
grey RAL 7032
PUR (polyurethane)
CE
Unpainted stainless steel
Degree of protection EN 60529
Impact resistance
EN 62262 (+35°C / -25°C)
Standard colour
Door gasket
Certificates
IP 66 (with 2 doors IP55)
IK 09
AISI 304, unpainted
PUR (polyurethane)
CE
Accessories
Adapted for enclosure
with Dimension Code
Rain shelter (roof)
painted RAL 7032
Rain shelter (roof)
stainless steel
AISI 304
Mounting Plate*
galvanized steel
DIN rail
(W = 35mm)
for door
203015
302015
303015
303020
304020
403015
403020
404020
404030
405020
406020
406030
505020
505030
506030
604020
604030
606020
606030
608020
608030
6010030
6012030
806030
808020
808030
8010030
8012030
1008030
10010030
10012030
ENERS2015G
ENERS3015G
ENERS3015G
ENERS3021G
ENERS3021G
ENERS4015G
ENERS4021G
ENERS4021G
ENERS4031G
ENERS4021G
ENERS4021G
ENERS4031G
ENERS5021G
ENERS5031G
ENERS5031G
ENERS6021G
ENERS6031G
ENERS6021G
ENERS6031G
ENERS6021G
ENERS6031G
ENERS6031G
ENERS6031G
ENERS8031G
ENERS8021G
ENERS8031G
ENERS8031G
ENERS8031G
ENERS10031G
ENERS10031G
ENERS10031G
ENERS2015B
ENERS3015B
ENERS3015B
ENERS3021B
ENERS3021B
ENERS4015B
ENERS4021B
ENERS4021B
ENERS4031B
ENERS4021B
ENERS4021B
ENERS4031B
ENERS5021B
ENERS5031B
ENERS5031B
ENERS6021B
ENERS6031B
ENERS6021B
ENERS6031B
ENERS6021B
ENERS6031B
ENERS6031B
ENERS6031B
ENERS8031B
ENERS8021B
ENERS8031B
ENERS8031B
ENERS8031B
ENERS10031B
ENERS10031B
ENERS10031B
ENEMP231
ENEMP321
ENEMP331
ENEMP331
ENEMP341
ENEMP431
ENEMP431
ENEMP441
ENEMP441
ENEMP452
ENEMP462
ENEMP462
ENEMP552
ENEMP552
ENEMP562
ENEMP642
ENEMP642
ENEMP662
ENEMP662
ENEMP683
ENEMP683
ENEMP6103
ENEMP6123
ENEMP863
ENEMP883
ENEMP883
ENEMP8103
ENEMP8123
ENEMP1083
ENEMP10103
ENEMP10123
ENDR3520D
ENDR3530D
ENDR3530D
ENDR3530D
ENDR3540D
ENDR3540D
ENDR3540D
ENDR3540D
ENDR3540D
ENDR3540D
ENDR3540D
ENDR3540D
ENDR3550D
ENDR3550D
ENDR3550D
ENDR3560D
ENDR3560D
ENDR3560D
ENDR3560D
ENDR3560D
ENDR3560D
ENDR3560D
ENDR3560D
ENDR3580D
ENDR3580D
ENDR3580D
ENDR3580D
ENDR3580D
ENDR35100D
ENDR35100D
ENDR35100D
*
mounting plate is included in all standard enclosure deliveries
1 mounting plate 2.0mm thick
2 mounting plate 2.5mm thick
3 mounting plate 3.0mm thick
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
25
Steel Enclosures
ENE series
IP66/55 (with 2 doors)
Accessories
Adapted for enclosure
with Dimension Code
DIN rail (W = 35mm)
for base
DIN rail profile for door
(pair)
DIN rail profile for base
(pair)
203015
302015
303015
303020
304020
403015
403020
404020
404030
405020
406020
406030
505020
505030
506030
604020
604030
606020
606030
608020
608030
6010030
6012030
806030
808020
808030
8010030
8012030
1008030
10010030
10012030
ENDR3520B
ENDR3530B
ENDR3530B
ENDR3530B
ENDR3540B
ENDR3540B
ENDR3540B
ENDR3540B
ENDR3540B
ENDR3540B
ENDR3540B
ENDR3540B
ENDR3550B
ENDR3550B
ENDR3550B
ENDR3560B
ENDR3560B
ENDR3560B
ENDR3560B
ENDR3560B
ENDR3560B
ENDR3560B
ENDR3560B
ENDR3580B
ENDR3580B
ENDR3580B
ENDR3580B
ENDR3580B
ENDR35100B
ENDR35100B
ENDR35100B
ENEDP30
ENEDP20
ENEDP30
ENEDP30
ENEDP40
ENEDP30
ENEDP30
ENEDP40
ENEDP40
ENEDP50
ENEDP60
ENEDP60
ENEDP50
ENEDP50
ENEDP60
ENEDP40
ENEDP40
ENEDP60
ENEDP60
ENEDP80
ENEDP80
ENEDP100
ENEDP120
ENEDP60
ENEDP80
ENEDP80
ENEDP100
ENEDP120
ENEDP80
ENEDP100
ENEDP120
ENEBP30
ENEBP20
ENEBP30
ENEBP30
ENEBP40
ENEBP30
ENEBP30
ENEBP40
ENEBP40
ENEBP50
ENEBP60
ENEBP60
ENEBP50
ENEBP50
ENEBP60
ENEBP40
ENEBP40
ENEBP60
ENEBP60
ENEBP80
ENEBP80
ENEBP100
ENEBP120
ENEBP60
ENEBP80
ENEBP80
ENEBP100
ENEBP20
ENEBP80
ENEBP100
ENEBP120
26
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Steel Enclosures
ENE series
IP66/55 (with 2 doors)
Accessories
Other accessories
Triangular lock with ∅11 mm key
Lock with wing handle, W = 50 mm
Lock, incl. 2 keys
DIN-3 key for standard lock
Black swing handle for three point locking
Door stopper (FeZn)
Door grounding, Ø 5 mm x 200 mm
Fastening lugs, set, 20 mm high, AISI304
Fastening lugs, set, 50 mm high, AISI304
Counter part for fastening lugs, set of 4 pcs
Steel plates, painted RAL7032
Ventilation flange size F2
Cover flange size F1
Cover flange size F2
Membrane flange
For 5 x Ø 7-30 mm cables, EPDM, size F1
For 25 x Ø 5-26 mm cables, EPDM, size F2
For 35 x Ø 5-26 mm cables, EPDM, size F2
For 3 x Ø 24-60 mm cables, EPDM, size F2
Drain water plug
Drain water plug, IP44, rubber
Ø 33mm
Triangular lock with ∅11 mm key ENED10
Lock with wing handle, W = 50 mm
ENEVF2 ventilation flange, size F2. Degree
Fastering lugs are delivered in sets of four
ENED10M6
of protection IP44.
dept alternatively 20mm or 50mm.
Flanges, for steel enclosure
Membrane flanges, size F2
Socket joint for steel enclosure
for cable Ø 9-13mm, grey plastic,
Connection muffles, for steel enclosure
For Ø 40 mm Al conduit
For Ø 50 mm Al conduit
Wiring plugs, for steel enclosure
Cable lead-through 16 mm, 12 ea./set,
Cable lead-through 20 mm, 12 ea./set,
Cable lead-through 25 mm,
Cable lead-through 32 mm,
Ventilation Device
IP66/68, grey PA, high flow
IP66/68, black PA, high flow
IP66/68, SS, standard flow
IP66/68, grey SS, high flow
Drain water plug ENDWP1
Cover flange size F2
ENED10
ENED10M6
ENEKL1
ENOLT42KEY
ENEH1
ENEDS1
ENEG200
ENEFFL2-20
ENEFFL2-50
ENEFLM4
ENEVF2
ENECF1
ENECF2
ENF1201
ENF2202
ENF2203
ENF2204
ENDWP1
ENPMR331
Ø26mm x 17mm
ENPMR54-20
ENKP5-36
ENKP6-36
external Ø 20 mm
external Ø 22 mm
external Ø 30 mm
external Ø 37 mm
ENPMR70-1612
ENPMR70-2012
ENPMR70-25
ENPMR70-32
ENBPA10H
ENBPA10HB
ENBSS10S
ENBSS10H
Socket joint ENPMR 54.20
Membrane flanges, size F2
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
27
OUR SALES NETWORK IN EUROPE
AUSTRIA - Carlo Gavazzi GmbH
Ketzergasse 374, A-1230 Wien
Tel: +43 1 888 4112
Fax: +43 1 889 10 53
[email protected]
FRANCE - Carlo Gavazzi Sarl
Zac de Paris Nord II, 69, rue de la Belle
Etoile, F-95956 Roissy CDG Cedex
Tel: +33 1 49 38 98 60
Fax: +33 1 48 63 27 43
[email protected]
BELGIUM - Carlo Gavazzi NV/SA
Schaarbeeklei 213/3, B-1800 Vilvoorde
Tel: +32 2 257 4120
Fax: +32 2 257 41 25
[email protected]
DENMARK - Carlo Gavazzi Handel A/S
Over Hadstenvej 42, DK-8370 Hadsten
Tel: +45 89 60 6100
Fax: +45 86 98 15 30
[email protected]
FINLAND - Carlo Gavazzi OY AB
Petaksentie 2-4, FI-00630 Helsinki
Tel: +358 9 756 2000
Fax: +358 9 756 20010
[email protected]
GERMANY - Carlo Gavazzi GmbH
Rudolf-Diesel-Strasse 23,
D-64331 Weiterstadt
Tel: +49 6151 81000
Fax: +49 6151 81 00 40
[email protected]
GREAT BRITAIN - Carlo Gavazzi UK Ltd
7 Springlakes Industrial Estate,
Deadbrook Lane, Hants GU12 4UH,
GB-Aldershot
Tel: +44 1 252 339600
Fax: +44 1 252 326 799
[email protected]
ITALY - Carlo Gavazzi SpA Via Milano 13, I-20020 Lainate
Tel: +39 02 931 761
Fax: +39 02 931 763 01
[email protected]
NETHERLANDS - Carlo Gavazzi BV
Wijkermeerweg 23,
NL-1948 NT Beverwijk
Tel: +31 251 22 9345
Fax: +31 251 22 60 55
[email protected]
NORWAY - Carlo Gavazzi AS
Melkeveien 13, N-3919 Porsgrunn
Tel: +47 35 93 0800
Fax: +47 35 93 08 01
[email protected]
PORTUGAL - Carlo Gavazzi Lda
Rua dos Jerónimos 38-B,
P-1400-212 Lisboa
Tel: +351 21 361 7060
Fax: +351 21 362 13 73
[email protected]
SPAIN - Carlo Gavazzi SA
Avda. Iparraguirre, 80-82,
E-48940 Leioa (Bizkaia)
Tel: +34 94 480 4037
Fax: +34 94 480 10 61
[email protected]
SWEDEN - Carlo Gavazzi AB
Nattvindsgatan 1, S-65221 Karlstad
Tel: +46 54 85 1125
Fax: +46 54 85 11 77
[email protected]
SWITZERLAND - Carlo Gavazzi AG
Verkauf Schweiz/Vente Suisse
Sumpfstrasse 32,
CH-632 Steinhausen
Tel: +41 41 747 4535
Fax: +41 41 740 45 40
[email protected]
OUR SALES NETWORK IN NORTH AMERICA
USA - Carlo Gavazzi Inc.
750 Hastings Lane,
USA-Buffalo Grove, IL 60089,
Tel: +1 847 465 6100
Fax: +1 847 465 7373
[email protected]
CANADA - Carlo Gavazzi Inc.
2660 Meadowvale Boulevard,
CDN-Mississauga Ontario L5N 6M6,
Tel: +1 905 542 0979
Fax: +1 905 542 22 48
[email protected]
CANADA - Carlo Gavazzi LTEE
3777 Boulevard du Tricentenaire
Montreal, Quebec H1B 5W3
Tel: +1 514 644 2544
Fax: +1 514 644 2808
[email protected]
SINGAPORE - Carlo Gavazzi Automation
Singapore Pte. Ltd.
No. 178 Paya Lebar Road
#04-01/05 409030 Singapore
Tel: +65 67 466 990
Fax: +65 67 461 980
MALAYSIA - Gavazzi Automation
Sdn Bhd.
54, Jalan Rugbi 13/30,
Tadisma Business Park Seksyen13
40100 Shah Alam, Selangor
Tel: +60 3 55 121162
Fax: + 60 3 55 126098
CHINA - Carlo Gavazzi Automation
(China) Co. Ltd.
No. 1001 Shangbu Middle Road,
Futian, Shenzhen
Tel: +86 755 83699500
Fax: +86 755 83699300
HONG KONG - Carlo Gavazzi
Automation Hong Kong Ltd.
Unit 3 12/F Crown Industrial Bldg.,
106 How Ming St., Kowloon,
Hong Kong
Tel: +852 23041228
Fax: +852 23443689
Carlo Gavazzi Industri A/S
Hadsten - DENMARK
Tel: +45 89 60 6100
Carlo Gavazzi Ltd
Zejtun - MALTA
Tel: +356 23 601 100
Carlo Gavazzi Controls SpA
Controls Division
Belluno - ITALY
Tel: +39 0437 931 000
Carlo Gavazzi Controls SpA
Sensors Division
Castel Maggiore (BO) - ITALY
Tel: +39 051 417 8811
Carlo Gavazzi Industri
Kaunas - LITHUANIA
Tel: +370 3732 8227
Carlo Gavazzi Automation
(Kunshan) Co., Ltd.
Kunshan - CHINA
Tel: +86 512 5763 9300
OUR PRODUCTION SITES
HEADQUARTERS
Carlo Gavazzi Automation SpA
Via Milano, 13 - I-20020
Lainate (MI) - ITALY
Tel: +39 02 931761
[email protected]
www.carlogavazzi.com/ac
CARLO GAVAZZI
Automation
Components
Further information on www.carlogavazzi.com/ac
CAT ENCLOSURE 3.82.20.18.1/00 REV.0 09/06
OUR SALES NETWORK IN ASIA AND PACIFIC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement