SP-12HD Multi-Format Analog & HD-SDI Video Processor/ProcAmp/TBC/Format Converter The SP-12HD is a broadcast quality video processor that functions as a ProcAmp, TBC and format converter for composite video, s-Video (Y/C), component video (YUV) and HD-SDI video signals. The original and processed images can be viewed simultaneously with the split screen output enabled. SP-12HD FEATURES Bandwidth - 0.5dB to 5MHz (SDTV), to 10MHz (EDTV), to 30MHz (HDTV) fully loaded. Multi-Format Capability - Selected standard definition input is simultaneously output as composite video, s-Video, component video (YUV or Y/R-Y/B-Y) and SDI or selected high definition input is simultaneously output as component video (YUV or Y/R-Y/B-Y) and HDSDI. Multi-Standard - PAL-B/M/N, NTSC-184.108.40.206, SECAM & SD/HD (analog & digital). ProcAmp Control - Contrast, brightness, H/V sharpness, level/gain and full range of color control in YUV & RGB color spaces. Time Base Corrector. Screen Splitter - Simultaneous display of original video and processed video on a single screen in composite and YUV (for an SD source) or YUV (for an HD source). Timing Control - H & V chroma delay. Resolution - 10 bits. Memory Locations - Stores 16 multiple switches as presets. Control - Front panel and RS-232. Front Panel Lockout. Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 1U, rack "ears" included. TECHNICAL SPECIFICATIONS INPUTS: 1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75Ω on BNC connectors; 1 SDI:SMPTE-259M, SMPTE292M, SMPTE-344M, ITU-R BT.601 on a BNC connector. OUTPUTS: 1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω(Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75Ω on BNC connectors; 2 SDI: SMPTE-259M, SMPTE292M, SMPTE-344M, ITU-R BT.601 on BNC connectors. BANDWIDTH: 0.5dB to 5MHz (SDTV), to 10MHz (EDTV), to 30MHz (HDTV), fully loaded. S/N RATIO: 60dB. CONTROLS: Front-panel and RS-232: contrast, brightness, video gain, color, hue, H/V sharpness, H/V chroma-luma shift; R-Y, B-Y level; screen splitter (process to bypass); panel lock. INPUT VIDEO STANDARDS: CVBS (SDTV): PALB/D/G/H/I/M/N, NTSC-3.58/4.43, SECAM; EDTV:480p/60, 576p/50; HDTV:720p/50, 720p/59.94, 720p/60, 1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/30, 1080psf/23.98, 1080psf/24, 1080psf/25, 1080psf/29.97 and 1080psf/30. OUTPUT VIDEO Same as input standard with STANDARDS: these exceptions: for a CVBS input signal, the output standard can be only PAL-B or NTSC-3.58 depending on input frame rate; for EDTV or HDTV input signals, the CVBS output signal is not available.