AP Mixer Amplifiers
AP Mixer Amplifiers
AP-200P – 70
AP-300P – 130
AP-600P – 260
AP-1000P – 360
Watts
Watts
Watts
Watts
Features
• 3 microphone and 2 auxiliary inputs; 1 line out.
• 100V, 70V and 4-16 Ohms transformer-isolated speaker outputs.
• Automatic mute function, useful for paging and announcements.
• Independent gain controls.
• Separate bass and treble tone controls.
• 5-element LED level meter makes it easy to view the output level.
• Output short circuit protection and warning
Front Panel
1 Power Switch
2 Power Indicator
3 Bass Control
4 Treble Control
5 MIC Gain Controls
6 AUX Gain Controls
Rear Panel Diagram
AUX1 INPUT
AUX2 INPUT
LINE OUT
Freunder Weg 90, 52074 Aahen, Germany
MUTE SENSITIVITY
SPEAKER OUTPUTS
7 MIC1 Input
8 LED Level Meter
Mute Function
MIC1 takes priority over and mutes all other inputs. The mute may be adjusted with the
"MUTE" sensitivity control knob on the rear panel. The factory default setting is-30dB.
Installation Notes
• The outer cabinet should be safely grounded
• The power cord plug should be appropriate for the power outlet.
• Do not block the ventilation holes.
• If the power cord is damaged, do not use the amplifier until it has been repaired.
Do not put the amplifier:
• In a dusty or damp place.
• In bright sunlight, high ambient temperature, near a heat source, or vibration.
Special Hints
• The amplifier will produce a warning sound if the outputs are shorted. Please turn the
power off and check the speaker wires before turning the power on.
• If the amplifier overheats due to high ambient temperature, do not turn the power off but
reduce the volume to minimum to allow the cooling fan to reduce the temp.
Specifications
Model
Rated power
Speaker Output
Auxiliary Output
Inputs
AP-200P
70W
), unbalanced
Freq. Response
THD
S/N Ratio
Tone Control
Protection
Mute Function
Dimensions
(H× W× D)
Net Weight
Gross Weight
AP-1000P
360W
AC Fuse, DC voltage, overload, and short circuit
MIC1 mutes all other inputs with 0-30 dB attenuation
AC200~240V/50~60HZ
Power Requirements
Power Consumption
AP-300P
AP-600P
130W
260W
Balanced 4-16 Ohms 70V, 100V constant voltage
600 Ohms, 1V (0dBV)
MIC 1, 2, 3 : 600 Ohms, 2.0mV (-54dB), unbalanced
AUX1, 2: 10k Ohms, 150mV (-17dB), unbalanced
0k
Ohms, 150mV(-3dB)
(-17dB
60Hz~15kHz
Less than 0.1% at 1kHz, 1/3 rated power
ed power
MIC1,2,
3:66dB
AUX1,2:70dB
Bass: ± 10dB at 100Hz
Treble: ± 10dB at 10KHz
140W
250W
500W
700W
89 X 483 X 366 mm
10.0kg
11.4kg
11.0kg
12.4kg
13.5kg
14.9kg
Attention:
Please do not remove the unit’s cover in order to prevent electric shock.
Refer servicing to qualified service personnel.
Freunder Weg 90, 52074 Aachen,
Germany
14.1kg
15.4kg
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement