max. DESTROYIT 2503 21 ® sheets v 10 1⁄4" w Compact, entry model Centralized Office shredder with a 10 1/4 inch feed opening and 20 gallon shred volume. Security level P-2 4 mm strip-cut (3/16 inch) Sheet capacity: 19-21* Security level P-4 4 x 40 mm cross-cut (3/16 x 1 1/2 inches) Sheet capacity: 12-14* Security level P-5 2 x 15 mm cross-cut (3/32 x 5/8 inches) Sheet capacity: 8-10* *Certified using 8 1/2" x 11" 20 lb. bond and recommended power supply. Comprehensive SPS safety package: Easy Switch control element uses illuminated color codes and symbols to indicate operational status and functions as an emergency stop switch; patented, electronically controlled, transparent safety shield in the feed opening; automatic power cut-off when cabinet is opened or shred bin is full; automatic reverse and power cut-off when overfed; double protection against overheating; Zero Energy Consumption sleep mode cuts off power supply after 30 minutes of inactivity. Automatic start and stop controlled by photo cell. High quality, hardened steel cutting shafts take staples, paper clips, and credit cards (strip-cut model takes CDs / DVDs). Lifetime warranty on the cutting shafts. Quiet and powerful single phase motor. Fully enclosed gear box housing. High quality wooden cabinet mounted on casters. Convenient, environmentally friendly shred bin does not require disposable shred bags. Specifications Shred volume, gallons 20 Feed opening, inches 10 1/4 Electrical requirements, volts 115 Maximum horsepower 3/4 Dimensions (D x W x H), inches 14 3/4 x 19 3/4 x 34 1/4 Shipping weight, pounds 78 WWW.MBMCORP.COM TEL: 800-223-2508 WWW.IDEAL-MBM.COM TEL: 800-387-2528 DESTROYIT® 2503 Features SOLID STEEL CUTTING SHAFTS High grade, hardened steel cutting shafts are milled in our Balingen factory and warranted for life. EASY SWITCH Multifunction control element uses optical signals to indicate operational status and functions as an emergency stop switch. PATENTED SAFETY SHIELD Electronically controlled, transparent safety shield keeps fingers out of the feed opening. ENVIRONMENTALLY FRIENDLY BIN Durable, lightweight shred bins can be used with or without disposable bags. LEAD-FREE SOLDERING Only environmentally friendly, lead-free soldering is used in the production of our electrical components. QUALITY COMPONENTS Cabinet doors are equipped with high quality adjustable metal hinges. 1 1) Super micro-cut shafts are covered by a one-year warranty. All technical data is approximate and subject to change. © MBM Corporation, 3/2014.