LS700™

LS700™
™
LS700
PORTABLEWIMSYSTEM
ISO 9001
Registered
Mobile Weigh-In-Motion
System Gets You Operational
Within Minutes.
Intercomp’s Weigh-in-Motion software works
with the LS700 Low Profile Weigh Pads. It is
intended for low speed weighing and can be
used for both static and dynamic weighing.
The system will display the current weight
when it is in the static weighing mode.
When weighing dynamically, the system
automatically starts the digital weighing
algorithm and processes the data quickly
to determine the most exact information.
•
•
•
•
•
•
•
•
Static & Dynamic Applications
Quick & Easy Setup
Low Profile Weigh Pads
Automatic Vehicle Identification
Multiple Site Data Collection
Self-Calibrating System
Overload & Overspeed Reports
Law Enforcement &
Fleet Management Software
• Screening for Overloaded Vehicles
• Full Statistical Analysis of
Vehicle Types & Classifications
• Stoplight & Traffic Control
• Calculates Center of Balance
For all your weighing needs, look to Intercomp.
®
LS700
Flexible Data
Storage &
Retrieval
System
Depending on your needs, you
have three options for storing
and exporting data.
11
22
33
When weighing
dynamically, the
Weigh-in-Motion
software starts taking
samples and saves them
to be analyzed after the
weighing period has expired.
This is a variable, set long
enough to weigh a large
multi-axle vehicle. The
software then analyzes
the data collected and
determines the weight
of each axle and the
total weight of the
vehicle among other
statistics. When the
weighing is completed,
the data is shown,
and a graph is
displayed to indicate
the number of axles
weighed, axle spacing,
velocity and list of
overloaded axles or
axle groups.
USE THE RESULTS WINDOW ON THE MAIN FORM ONLY.
You can save this data to individual text files or print it out.
USE A DELIMITED TEXT FILE. This file will be filled with the same
results that you see in the results window, but is easy to import
into other programs such as Excel® or Word®. These files can also
be used with non MS Access® database systems.
USE THE SUPPLIED MS ACCESS® DATABASE FILE.
Again, the same data is stored in a table within this file, and
can be manipulated as desired.
You can use any or all of these options at the same time. These files
can be stored locally on the Weigh-in-Motion computer or across a
network, allowing realtime data sharing with the results. When
weighing dynamically, the system is fully automatic. The Weigh-inMotion CPU starts collecting and processing the weight applied to
the weigh pads, and the data is stored automatically when the
weighing is finished.
WIM Weigh Screen
System Requirements
WIM Session Setup Screen
You can supply the computer
yourself or purchase one from
Intercomp. If we supply the
computer, we will install all
of the hardware and software
that you need and optimize it
for your WEIGH-IN-MOTION
application.
If you supply your own
computer you will have to:
• Install the LS700 weigh
pad interface card
• Install the Weigh-in-Motion
software
• Adjust the Weigh-in-Motion
parameters
It is recommended that you feel comfortable
working with computers, both hardware and
software, to accomplish these tasks. Using the
Weigh-in-Motion software after the installation
of the components is user friendly, and easy.
PENTIUM IV, 1GHZ OR BETTER PROCESSOR
HARD DRIVE WITH AT LEAST 50MB OF FREE
SPACE (FOR INSTALLATION AND DATA FILES)
128 MB RAM (256MB
3D AGP
RECOMMENDED)
VIDEO CARD
OPTIONAL: IMPACT DOT MATRIX
TICKET PRINTER
WIM Administration
Setup Screen
®
LS700PORTABLEWIMSYSTEM
WEIGH PAD Specifications
Rated
Capacity:
LARGE
MEDIUM
SMALL
40,000 lbs/
30,000 lbs/
20,000 lbs/
20,000 kg
15,000 kg
10,000 kg
Weight:
140 lbs/64 kg
99 lbs/45 kg
53 lbs/24 kg
Pad Size:
36 x 24 x 1 inches/
28 x 22 x 1 inches/
22.5 x 15 x 1 inches/
914 x 610 x 25 mm
711 x 558 x 25 mm
571 x 381 x 25 mm
Operating
Temperature
Range:
-22 to +140 deg F/-30 to 60 deg C
Material:
High strength aluminum alloy
Operating
Speed:
0-6 mph/ 0-10 km/h
Static
Accuracy:
Up to 0.1% of verified gross weight
Dynamic
Accuracy:
±1% of verified gross weight 3mph/5km/hr
±3% of verified gross weight 6mph/10km/hr
Overload
Capacity:
200% full scale
These weigh pads can be used with or without
leveling approach pads. For higher accuracy
we recommend the use of approach and exit
pads. Each pad spans approximately three feet in
length, and ensures that the vehicle stays level
during the weighing process. The leveling pads
and ramps are made from a high compression
strength composite material. They are easy to
setup and takedown. Angled ends provide a
smooth transition from the road surface to the
elevated runway.
Input/Output
Resistance:
280 ohms
Output:
2.0 mV/V
Excitation:
5 to 15 VDC
Power:
Battery, AC or DC from vehicle
Stability:
0.5% full scale/year
Ground Level
Requirement: <0.2 inch within 0-12 feet/
<5 mm within 0-3.65 meters
Design
Standard:
Designed for portable Weigh-in-Motion systems,
these weigh pads are only 1” in profile. They are
fabricated from high strength aluminum and
have a capacity of up to 40,000 lbs/20 tons
per pad. Each pad has a flexible and quick
disconnect connector for easy setup.
NTEP Class IV / OIML Class IV R76
Site conditions must meet or exceed those specified
in ASTM E1318-00.
The approach and exit pads attach to the weigh
pads to ensure that they stay in place at all times.
Since the pads are modular, you can order as
many or as few sections as you need, depending
on the size of vehicle you are weighing.
LS700™ is a trademark of Intercomp Company.
ISO 9001
Registered
Leveling Pad Specifications:
Size:
Same as weigh pads
Section Weight:
Material:
Large20 lbs/9 kg
Medium- 14 lbs/6.5 kg
Small7 lbs/3.2 kg
Temperature
Range:
-40 to 150 deg F/-40 to 65 deg C
System Components:
• WIM Weigh Pads
• Leveling Pads
• Approach & Exit Ramps
• WIM Interface Box
• Notebook Computer
• WIM Software
• Cabling for Pads & Computer
• Transport Case
Printed in the U.S.A.
®
High compression strength composite
14465 - 23rd Avenue
Minneapolis, MN 55447-3438 U.S.A.
All Rights Reserved
Toll Free: 800-328-3336
Worldwide: 763/476-2531
Fax: 763/476-2613
Web Site: www.intercompco.com
E-mail: [email protected]
Made In U.S.A.
©2003 Intercomp Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement