Driver for Cash Drawer Serial Trigger (USB to RJ11 plug)

Driver for Cash Drawer Serial Trigger (USB to RJ11 plug)
Portal > Knowledgebase > Hardware > POS Equipment > 5000 Cash Drawer: Driver for Cash
Drawer Serial Trigger (USB to RJ11 plug)
5000 Cash Drawer: Driver for Cash Drawer Serial Trigger
(USB to RJ11 plug)
Internal User - 2013-06-05 - 0 Comments - in POS Equipment
Download the driver for the Cash Drawer Serial Trigger from:
http://dl.waspbarcode.com/wasp/CashDrawerSerialTriggerDriver.zip
After downloading and extracting that file, run PL2303_Prolific_DriverInstaller_v130.exe.
When it has finished installing, plug in the trigger and it will be recognized by Windows.
Check Start > Devices and Printers, and it will be listed as Prolific USB-to-Serial Comm Port,
and will show the COM port number it has been assigned.
If you're using Wasp QuickStore software, go to Setup > This Computer > 2. Cash Drawer.
Check the box for "This computer controls a cash drawer". On "The cash drawer is
connected to:" menu, pick the COM port number, then click Test Drawer and it should open.
This driver is compatible with 32- and 64-bit versions of Windows 8, 7, Vista, XP SP2, and
Windows Server 2008 R2, 2008, 2003.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement