Structured Cabling Catalogue - Pacific Cabling Solutions Ltd.

Structured Cabling Catalogue - Pacific Cabling Solutions Ltd.
Table of Contents
Table of Contents
Open Frame Racks
2-Post Open Frame Racks - Threaded
Pgs.
4-5
4-Post Open Frame Racks - Threaded
6-7
Cable Management
Vertical Cable Managers for Open Frame Racks
Pgs.
8-9
Vertical Cable Lacing Strips and Cable Management Items
10
Fiber/Cable Spools and Horizontal Cable Managers
11
Cable Ladders
Horizontal Lacer Bars
Wall Mounts
Swing Frame Rack
14
Pgs.
15
Pivoting Panel Mount and Vertical Panel Mount
16
Hinged Panel Mount and Wall Mount Open Frame Rack
17
Enclosures
DRK Series Gangable Cable Management Rack Enclosure
Pgs.
18 - 19
WMRK Series Server Enclosures
20 - 21
MRK Series Gangable Rack Enclosures
22 - 23
Raised Floor Enclosure Support System™
24 - 25
WR Series Roll Out Rotating System in Steel Host Enclosure
26
IDF Series Ceiling Mount Cabinet
27
Pivoting/Wall Mount Cabinets
CWR Series CableSafe™ Data Wall Cabinet
29
SR Series Pivoting Floor Mount Cabinet
30
HDR Series Low-Profile Wall Mount Horizontal Equipment Cabinet
and TOR Series Tilt Out Wall Cabinet
31
WRP/WRS Series and SPM Series Wall Mount Cabinets
32
SignalSafe™ IEC Power Cords
Vertical Power Products
38
Thermal Management
High CFM Rear Doors and Controller
Pgs.
39
UQFP Series Ultra Quiet Fan Panels
40
Fan and Fan Trays
41
DRK Series
WMRK Series
MRK Series
Pgs.
42
Vent and Blank Panels
43
Rackmount LCD Keyboard & Rackmounts for LCDs
44
MS/UFA Shelves and Keyboard Sliding Shelves
45
R2 Series
46 - 48
Rackmount Storage
49
Rack Screws and Accessories
50
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Available Seismic Cabinets Include:
34
Rackmount Power Distribution, Control, and Sequencing
Technical Resources
Most welded, floor standing Middle Atlantic Products enclosures are
seismic certified at no extra charge, which ensures that they provide
the structural integrity required for your installation to meet UBC, CBC,
IBC, ASCE and NFPA standards.
35 - 36
37
Rackshelves
Seismic certification ensures that the essential equipment housed in
the enclosure can survive a seismic event. This is critical in the many
seismic areas throughout the world, and is often a requirement in
other mission critical installations as well.
Pgs.
33
Multi-Mount™ Rackmount Power and Spike Bonding Hardware
Accessories
Security Covers and Accessory Panels
What Does Seismic Certified Mean?
Pgs.
28
DWR Series Wall Cabinet
Power Lighting and Distribution
Rack Lighting
2
12 - 13
Pg. 50
MK Series
Product Index
4-Post
Open Frame Racks
Vertical
Cable Managers
Vertical
Cable Lacing Strips
Horizontal
Cable Managers
Cable
Ladders
Pgs. 4 - 5
Pgs. 6- 7
Pgs. 8 - 9
Pg. 10
Pg. 11
Pgs. 12 - 13
Horizontal
Lacer Bars
Swing
Frame Rack
Gangable Cable
Management Rack
Server
Enclosures
Pg. 14
Pg. 15
Pg. 16
Pg. 17
Pgs. 18 - 19
Pgs. 20 - 21
Gangable
Rack Enclosures
Raised Floor Enclosure
Support System™
Roll Out
Rotating System
Ceiling
Mount Cabinet
CableSafe™
Data Wall Cabinet
DWR Series
Wall Cabinet
Pgs. 22 - 23
Pgs. 24 - 25
Pg. 26
Pg. 27
Pg. 28
Pg. 29
Pivoting Floor
Mount Cabinet
Tilt Out & Horizontal
Equipment Cabinet
WRP/WRS & SPM Series
Wall Mount Cabinets
Rack
Lighting
SignalSafe™ IEC
Power Cords
Vertical
Power Products
Pg. 30
Pg. 31
Pg. 32
Pg. 33
Pg. 34
Pgs. 35 - 36
Multi-Mount™
Power Products
Power Distribution,
Control & Sequencing
High CFM
Rear Doors
Ultra Quiet
Fan Panels
Fans and
Fan Trays
Security Covers &
Accessory Panels
Pg. 37
Pg. 38
Pg. 39
Pg. 40
Pg. 41
Pg. 42
Vent & Blank
Panels
Rackmount LCD
Keyboard
MS/UFA Shelves &
Keyboard Sliding Shelves
Rackshelves
Rackmount
Storage
Rack Screws &
Accesoories
Pg. 43
Pg. 44
Pg. 45
Pgs. 46 - 48
Pg. 49
Pg. 50
Pivoting Panel Mount Hinged Panel Mount &
& Vertical Panel Mount
Wall Mount Rack
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
Product Index
2-Post
Open Frame Racks
3
Open Frame Racks
2-Post Cable Management Racks - Threaded
Dimensions
ALL VERTICAL
CABLE MANAGERS
REDESIGNED TO
WORK ON ALL
2-POST & 4-POST
RACKS (RL, RLA,
R2, R4, MK ,SERIES)
top cable tray,
front and rear
45 RU - 84.25”h x 24”w x 16”d
45 RU -84.25”h x 24”w x 24”d
Construction
16-gauge steel
10-32 threaded, 1/8” thick
accepts
cable ladders
without
additional
accessories
Finish
Black powder coat
cable pass
throughs
16”d - 500 lbs.
24”d - 800 lbs.
24” base
width for
use with
raised
flooring tiles
16-7/16”
Weight Capacity
Shipping Weight
16”d - 65 lbs.
24”d - 85 lbs.
24”
EIA/TIA Compliant
MK-19-45
Spec. #
96-281
24”
A&E
for full
product
info.
Models Available
24”
MK-19-45-24
Part #
Description
MK-19-45
7 ft. cable management rack, 19” EIA mounting width, 24”w x 16” deep foot print, 6” deep channels, includes 100 rack screws
MK-1945-24
7 ft. cable management rack, 19” EIA mounting width, 24”w x 24” deep foot print, 14” deep channels, includes 100 rack screws
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-2415SC-NS
60” power strip with (24) 5-15R outlets and 10 ft. cord and 5-15P plug
PD-815SC-NS
18” power strip with (8) 5-15R outlets and 10 ft. cord and 5-15P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
shelving
PB-90
vertical power strip mounting bracket (pair)
U2MS
2 RU center mount shelf 18” deep, 50 lb. weight capacity
U2V
2 RU front mount shelf 14.5” deep, 50 lb. weight capacity – vented
hardware
HP
100 pieces additional 10-32 mounting screws
cable management*
HCM-1D
1 RU “D-Ring” style horizontal cable managers
HCM-2D
2 RU “D-Ring” style horizontal cable managers
PCS-3-MK
fiber/cable spools 3” deep, 10 pack
PCS-8-MK
fiber/cable spools 8” deep, 10 pack
*see pg. 8 for vertical managers
4
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
2-Post Open Frame Racks - Threaded
EIA/TIA Compliant
Spec. #
Spec. #
Spec. #
96-972
96-053
96-01107
for full
product
info.
gusseted base conforms
to uneven floors,
no shimming required
ALL VERTICAL
CABLE MANAGERS
REDESIGNED TO
WORK ON ALL
2-POST & 4-POST
RACKS (RL, RLA,
R2, R4, MK ,SERIES)
RLA19-1245
A&E
for full
product
info.
A&E
A&E
for full
product
info.
Models Available
EIA/TIA Compliant
shown with
optional
vertical
manager
RL10-45
R2-44S
RLA Series Aluminum 2-Post
RL Series Steel 2-Post
R2-44S Seismic 2-Post
The industry standard RLA series 2-post open
frame rack incorporates a 15” deep heavy-duty
aluminum base and includes holes so that the
rack can be secured to the floor.
• 12-24 threaded front and rear, with
numbered RU increments
• Channels constructed from 3/16” aluminum
• Available in silver brushed aluminum or
black powder coat finish
• Includes 50 rack screws
• Static load capacity - 1,600 lbs. when
properly loaded and anchored
• UL Listed in the US and Canada.
UL Listed load capacity - 400 lbs.
RL series 19” 2-post open frame racks
incorporate a self-squaring, self-leveling
design for easy assembly. Top rails
accommodate standard cable ladders.
• Threaded 10-32 or 12-24, with
numbered RU increments
• Channels constructed from 11-gauge
steel to provide extra strength
• Finished in a black powder coat
• Includes 50 rack screws
• Static load capacity - 1,600 lbs. when
properly loaded and anchored
• UL Listed in the US and Canada.
UL Listed load capacity - 400 lbs.
The R2-44S Seismic 2-post open frame
rack incorporates a heavy duty 3/8” thick
steel base that provides additional
structural integrity to the steel frame.
Top pattern accepts a variety of cable
ladders with no additional adapter required.
Ships assembled and ready to install.
• 10-32 threaded front and rear, with
numbered RU increments
• Channels constructed from 11-gauge
steel to provide extra strength
• Finish in a black powder coat
• Includes 50 rack screws
• Seismic Certified capacity 850 lbs.
Racking
Height
Part #*
RLA19-1251B 89-1/2” (51 RU)
RLA19-1245
78-3/4” (45 RU)
RLA19-1245B 78-3/4” (45 RU)
Overall Panel
Height Width Finish
Part #
Racking
Height
Overall
Height
Thread
Size
Part #
Racking
Height
Overall
Height
R2-44S
77” (44 RU)
84”
96-1/8”
19”
black
RL10-45
78-3/4” (45 RU)
84”
10-32
84”
19”
silver
RL10-38
66-1/2” (38 RU)
72”
10-32
black
RL12-45
78-3/4” (45 RU)
84”
12-24
84”
19”
Open Frame Racks
EIA/TIA Compliant
The CSB cantilever support base adds stability to RL Series Steel 2-Post Racks.
The CSB is especially helpful for installations when cantilever shelves are used
to mount heavy equipment and the center-of-gravity is shifted
Part # CSB
to the rear of the rack. Black powder coat finish.
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-2415SC-NS
60” power strip with (24) 5-15R outlets and 10 ft. cord and 5-15P plug
PD-815SC-NS
18” power strip with (8) 5-15R outlets and 10 ft. cord and 5-15P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
PB-90
vertical power strip mounting bracket
shelving
cable management*
U2MS
2 RU center mount shelf 18” deep, 50 lb. weight capacity
U2V
2 RU front mount shelf 14.5” deep, 50 lb. weight capacity - vented
HCM-1D
1 RU “D-Ring” style horizontal cable managers
HCM-2D
2 RU “D-Ring” style horizontal cable managers
*see pg. 8 for vertical managers
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
5
Open Frame Racks
4-Post Open Frame Racks - Threaded
Dimensions
38 RU - 72”h x 20.25”w x (24, 30)”d (overall 36”d)
45 RU - 84”h x 20.25”w x (24, 30)”d (overall 36”d)
51 RU - 96”h x 20.25”w x (24, 30)”d (overall 42”d)
mounting locations
for optional power
Construction
3/16” extruded aluminum
12-24 threaded holes
Side panels available, see website
www.middleatlantic.com/dcm/rack/r4.htm
Includes 3rd set of adjustable rail
Finish
mounting locations
for additional fully
adjustable rail
Black anodized/black powder coat
Weight Capacity
UL Listed - 800 lbs. (load capacity)
Shipping Weight
75 - 89 lbs.
overall
depth useable
depth
20-1/4”
Spec. #
96-01076
for full
product
info.
Part #
Description
R412-3824B
6 ft. 38 RU 4-post open frame rack, 24” useable depth, 12-24 threaded, includes 100 rack screws
R412-3830B
6 ft. 38 RU 4-post open frame rack, 30” useable depth, 12-24 threaded, includes 100 rack screws
R412-4524B
7 ft. 45 RU 4-post open frame rack, 24” useable depth, 12-24 threaded, includes 100 rack screws
R412-4530B
7 ft. 45 RU 4-post open frame rack, 30” useable depth, 12-24 threaded, includes 100 rack screws
R412-5124B
8 ft. 51 RU 4-post open frame rack, 24” useable depth, 12-24 threaded, includes 100 rack screws
R412-5130B
8 ft. 51 RU 4-post open frame rack, 30” useable depth, 12-24 threaded, includes 100 rack screws
A&E
R412-4524B
with 12-24
threaded rackrail
EIA/TIA Compliant
numbered RU
increments speed
equipment mounting
Models Available
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-2415SC-NS
60” power strip with (24) 5-15R outlets and 10 ft. cord with 5-15P plug
PD-815SC-NS
18” power strip with (8) 5-15R outlets and 10 ft. cord with 5-15P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
PB-90
vertical power strip mounting bracket to face front or back of any rack (pair)
VSA-1626
< 1 RU 4-point mounting shelf, 400 lb. capacity
shelving
< 1 RU 4-point mounting shelf, 400 lb. capacity
U2V
2 RU front mount shelf 14.5” deep, 50 lb. weight capacity - vented
hardware
HP-24
100 pieces additional mounting screws
cable management
HCM-1D
1 RU “D-Ring” style horizontal cable managers
HCM-2D
2 RU “D-Ring” style horizontal cable managers
LACE-44-OWP
44 RU vertical lacer strip with tie posts
LACE-23-OWP
23 RU vertical lacer strip with tie posts
vertical management (see pgs. 8-10)
6
VSA-2744
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
4-Post Open Frame Racks - Cage Nut/Server Mount
45 RU - 84”h x 20.25”w x (24, 30, 36)”d (overall 36”d)
51 RU - 96”h x 20.25”w x (24, 30, 36)”d (overall 42”d)
Construction
mounting locations for
optional power
3/16” extruded aluminum
Cage nut style rackrail
Side panels available, see website
www.middleatlantic.com/dcm/rack/r4.htm
Includes 3rd set of adjustable rail
Open Frame Racks
Dimensions
Finish
Black powder coat
mounting locations
for fully adjustable
additional rail
Weight Capacity
UL Listed - 800 lbs. (load capacity)
Shipping Weight
75- 89 lbs.
EIA/TIA Compliant
overall
depth useable
depth
Spec. #
96-01076
A&E
for full
product
info.
Models Available
R4CN-4524B
with cage nut
style rackrail
numbered RU
increments speed
equipment mounting
21-1/4”
Part #
Description
R4CN-4524B
7 ft. 45 RU 4-post frame rack, 24” useable depth, square hole server mounting rails, includes (100) 6 mm screws and cage nuts
R4CN-4530B
7 ft. 45 RU 4-post frame rack, 30” useable depth, square hole server mounting rails, includes (100) 6 mm screws and cage nuts
R4CN-4536B
7 ft. 45 RU 4-post frame rack, 36” useable depth, square hole server mounting rails, includes (100) 6 mm screws and cage nuts
R4CN-5124B
8 ft. 51 RU 4-post frame rack, 24” useable depth, square hole server mounting rails, includes (100) 6 mm screws and cage nuts
R4CN-5130B
8 ft. 51 RU 4-post frame rack, 30” useable depth, square hole server mounting rails, includes (100) 6 mm screws and cage nuts
R4CN-5136B
8 ft. 51 RU 4-post frame rack, 36” useable depth, square hole server mounting rails, includes (100) 6 mm screws and cage nuts
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-2415SC-NS
60” power strip with (24) 5-15R outlets and 10 ft. cord with 5-15P plug
PD-815SC-NS
18” power strip with (8) 5-15R outlets and 10 ft. cord with 5-15P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
PB-90
vertical power strip mounting bracket to face front or back of any rack (pair)
shelving
VSA-2744
< 1 RU 4-point mounting shelf, 400 lb. capacity
U2V
2 RU front mount shelf 14.5” deep, 50 lb. weight capacity - vented
hardware
CN6MM-100 HP-6MM
100 pieces additional mounting screws
cable management
HCM-1D
1 RU “D-Ring” style horizontal cable managers
HCM-2D
2 RU “D-Ring” style horizontal cable managers
LACE-44-OWP
44 RU vertical lacer strip with tie posts
LACE-23-OWP
23 RU vertical lacer strip with tie posts
vertical management (see pgs. 8-10)
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
7
Cable Management
Vertical Cable Managers for Open Frame Racks
Duct System and Lift-Off Covers
CK-45
center duct
CK Series managers mount on all MK, RL, RLA and R4 Series open frame rack systems.
Optional split lift-off covers fit on front and rear of both center and end unit styles. Built
with dual channel design to handle extra large cable bundles while providing simple
distribution provisions in the front and rear.
CK-45E
end duct
Part #
Description
CK-45
45 RU center organizer
CK-45E
45 RU end organizer
CK-45C
45 RU organizer cover - 2 pieces
Dimensions
CK-45C
split cover
(2 pcs.)
9”
shown with
RL Series
racks
ALL VERTICAL
CABLE MANAGERS
REDESIGNED TO
WORK ON ALL
2-POST & 4-POST
RACKS (RL, RLA,
R2, R4, MK SERIES)
6”
Vertical Finger Duct System with Door
VCD Series managers mount on all MK, RL, RLA and R4 Series open frame rack systems.
10” Wide
6” Wide
Description
VCD-10-51-DC
VCD-6-51-DC
8 ft. (51 RU) dual cable duct system
VCD-10-51-SC
VCD-6-51-SC
8 ft. (51 RU) single cable duct system
VCD-10-45-DC
VCD-6-45-DC
7 ft. (45 RU) dual cable duct system
VCD-10-45-SC
VCD-6-45-SC
7 ft. (45 RU) single cable duct system
_
VCD-6-38-DC
6 ft. (38 RU) dual cable duct system
_
VCD-6-38-SC
6 ft. (38 RU) single cable duct system
Dimensions
with door open
21.08”
8.7”
with doors open
38.8”
EIA/TIA Compliant
Spec. #
VCD-10-51-DC
mounts next to or
between racks to
manage cabling
6” or 10”
12.8”
with door closed
22.3”
with doors closed
Single Duct
Dual Duct
96-01077
for full
product
info.
A&E
6” or 10”
Vertical Cable Chase with Hinged Door
RLA-CC Series managers mount on all MK, R2, RL, RLA and R4 Series 45 space open
frame rack systems, while providing abundant cable pass-throughs & cable lacing points.
Part #
Description
RLA-CC
7 ft. (45 RU) duct with hinged cover
Order 2 single ducts to make an economical dual channel organizer
Dimensions
with door open
11.4”
RLA-CC
optional vertical
cable manager
features a
full-length hinged
access door
8
5.4”
with doors open
22.9”
5.1”
R2-44S
shown with
RLA-CC
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
6.1”
with door closed
RLA-CC
5.1”
12.2”
with doors closed
2 RLA-CC’s mounted back to back
Plastic Cable Ducts for Open Frame Racks
Cable Management
Plastic Cable Ducts for 2-Post and 4-Post Racks
Provide a cost effective solution to protect, route and organize cables and cords.
• Available in 2”, 3”, and 4” widths, all with strong metal backing
• Available in 3” and 4” depths, single channel and 6” and 8” depths dual channel
• Slotted finger design allows for horizontal cable access exactly where it’s needed
• Fingers can be easily removed to create larger openings
• Plastic covers provide organization while keeping cables hidden
• Ideal for medium to low density installations
• Ready to mount to either side or in between two 2- and 4-post racks
Part #
Racking Height
Size
Type
PCD-2-3-51SC
51 RU
2"w X 3"d
single
PCD-2-3-45SC
45 RU
2"w X 3"d
single
PCD-2-3-38SC
38 RU
2"w X 3"d
single
PCD-3-3-51SC*
51 RU
3"w X 3"d
single
PCD-3-6-51DC*
51 RU
3"w X 6"d
dual
PCD-3-3-45SC*
45 RU
3"w X 3"d
single
PCD-3-6-45DC*
45 RU
3"w X 6"d
dual
PCD-3-3-38SC*
38 RU
3"w X 3"d
single
PCD-3-6-38DC*
38 RU
3"w X 6"d
dual
PCD-4-4-51SC*
51 RU
4"w X 4"d
single
PCD-4-8-51DC*
51 RU
4"w X 8"d
dual
PCD-4-4-45SC*
45 RU
4"w X 4"d
single
PCD-4-8-45DC*
45 RU
4"w X 8"d
dual
PCD-4-4-38SC*
38 RU
4"w X 4"d
single
PCD-4-8-38DC*
38 RU
4"w X 8"d
dual
dual
version
*Plastic cable ducts can mount in between two racks, for 38 RU and higher sizes only
Spec. #
Racking Height
Size
Type
PCD-2-3-30SC
30 RU
2"w X 3"d
single
PCD-2-3-25SC
25 RU
2"w X 3"d
single
PCD-2-3-20SC
20 RU
2"w X 3"d
single
PCD-2-3-15SC
15 RU
2"w X 3"d
single
PCD-2-3-12SC
12 RU
2"w X 3"d
single
PCD-2-3-8SC
8 RU
2"w X 3"d
single
Plastic Cable Ducts for 2-Post and
4-Post Racks
96-01115
for full
product
info.
A&E
Part #
single
version
EIA/TIA Compliant
• Matches and integrates well with Middle Atlantic PCD Series ducts
• Available in single piece and 4 packs; includes hinged cover
Single Piece
Part #
4 Pack
Part #
Description
PHCM-1-2
PHCM-1-2-P4
1 RU (1-3/4”) plastic finger horizontal cable manager, 2” deep
PHCM-1-4
PHCM-1-4-P4
1 RU (1-3/4”) plastic finger horizontal cable manager, 4” deep
PHCM-2-3
PHCM-2-3-P4
2 RU (3-1/2”) plastic finger horizontal cable manager, 3” deep
PHCM-1-2
PHCM-2-3
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
9
Cable Management
Vertical Cable Lacing Strips and Cable Management Items
Vertical Lacing Strips
Perforated steel lacer strips mount vertically to rackrail brackets and provide many locations for securing cable bundles. LACE-OWP and
LACE-OP strips include tie posts for sliding on pre-wrapped cable bundles using 1/2” hook-and-loop straps or cable ties. Some lacer strips
also accept cage nuts or mounting of select power strips for increased versatility. All strips sold in packs of 6.
4-3/4”
3-1/4”
1”
2”
LACE-44-OWP
LACE-44-OP
LACE-44-1P
3-1/2”
No need to fish cable ties &
straps - just slide them on!
LACE-P
LACE-44LP
Compatible Cable Management Options
Part #
Width
Racking Height
Tie Points
Qty
TW-12
Cage Nuts
LACE-5254-OWP*
4-3/4”
52-54 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
3
LACE-44-OWP*
4-3/4”
44 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
3
LACE-40-OWP*
4-3/4”
40 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
3
Cable Ties TSW
Anti-Slip Cable Pads
LACE-37-OWP*
4-3/4”
37 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
3
LACE-23-OWP*
4-3/4”
23 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
3
LACE-13-OWP*
4-3/4”
13 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
3
LACE-5254-OP
3-1/4”
52-54 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
–
LACE-44-OP*
3-1/4”
44 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
–
LACE-40-OP*
3-1/4”
40 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
–
LACE-37-OP*
3-1/4”
37 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
–
LACE-23-OP*
3-1/4”
23 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
–
LACE-13-OP*
3-1/4”
13 RU
mixed slip-on posts, cage nut holes and round holes
6
3
3
3
3
–
LACE-44LP
3-1/2”
44 RU
raised cable tie points
6
3
–
3
–
–
LACE-37LP
3-1/2”
37 RU
raised cable tie points
6
3
–
3
–
–
LACE-P*
2”
45 RU
round holes
6
3
3
–
–
–
LACE-37P*
2”
37 RU
round holes
6
3
3
–
–
–
LACE-13P*
2”
13 RU
round holes
6
3
3
–
–
–
LACE-44-1SP
1”
44 RU
10 pre-installed tie saddles
6
3
incl.
3
–
–
LACE-37-1SP
1”
37 RU
9 pre-installed tie saddles
6
3
incl.
3
–
–
LACE-5254-1P
1”
52-54 RU
tie saddles
6
3
3
–
–
–
LACE-44-1P*
1”
44 RU
tie saddles
6
3
3
–
–
–
LACE-37-1P*
1”
37 RU
tie saddles
6
3
3
–
–
–
*NOTE: Also accepts mounting of PD Slim and PDT Series vertical power.
Anti-Slip Cable Pad
The Anti Slip Cable Pad is made with a high friction material and mounts to OWP Series lace strips. By reducing
the tendency for vertical cable bundles to slip, these pads reduce the force required to secure cables, which in
turn helps ensure that sensitive cables operate at their designed performance level.
Part #
Qty
• Reduces risk of over tightening of tie points to ensure proper cable performance
ASP-OWP
4
• High tack polymer material gives a permanent high friction surface
ASP-OWP-6
24
• Helps cable stay in place and not slip at tie points
Cable Management Straps
Cable Tie Saddles
Fasten cable bundles securely while maintaining the integrity
of the cable. TW12 reusable cable management straps are
made from Velcro® and are perfect for managing cables that
are sensitive to strain. These straps are 8” long and are sold
in 12 piece packs.
Accommodates cable ties and hook &
loop straps up to 3/4” wide, including the
TW12 cable management strap. Mounts to
wall or specified LACE bars. Sold in packs
of 15 and includes mounting hardware.
Part #
Description
Qty
8”
TW12 8” cable/wire management straps 12
10
ASP-OWP
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
TW12
Part #
Description
Qty
TSW-15
cable tie saddles & hardware
15
TSW-15
Fiber/Cable Spools and Horizontal Cable Managers
Manage excess fiber or copper cable slack within a rack.
• Provides for proper bend radius for cables
• Available in 1-3/8”, 3”, and 8” depth sizes
• 4-pack configurations include mounting hardware & 2 brackets to allow for making a complete circle
• 10-pack configurations specially designed to mount on Middle Atlantic Products MK Series cable management racks
• 2 RU panel includes two spools which can rotate in 90° intervals
Racking Height
Type
Part #
Racking Height
Type
1-3/8" deep
4 pieces
PCS-8-2H
8" deep
2 RU panel
PCS-3-4
3" deep
4 pieces
PCS-1-MK 1-3/8" deep Kit for MK Series
10 pieces
3" deep Kit for MK Series
10 pieces
8" deep Kit for MK Series
10 pieces
PCS-8-4
8" deep
4 pieces
PCS-3-MK
PCS-1-2H
1-3/8" deep
2 RU panel
PCS-8-MK
PCS-3-2H
3" deep
2 RU panel
96-01115
for full
product
info.
A&E
Part #
PCS-1-4
Spec. #
Cable Management
Fiber/Cable Spools
PCS-3-2H
3” and 8” deep
sizes shown
Protective Grommet Strip
Rackmount Cable Tray
Place this flexible grommet material around openings and
knockouts for additional cable protection. Fits any material
up to 1/8” thick. Includes 30 ft. of black grommet.
Handy horizontal cable tray mounts on any 19” rack or cabinet & neatly
routes cable bundles from side to side. Turn-downs on sides help maintain
the required cable bend radius. Finished in a durable black powder coat.
Part #
Description
Part #
Racking Height
GR-30
grommet, 30 feet
HCT-1
1-3/4” (1 RU)
HCT-2
3-1/2” (2 RU)
GR-30
EIA/TIA Compliant
HCT-1
Hinged Horizontal Cable Managers
Conceal patch cables while providing cable strain relief with the hinged horizontal cable managers. These 19” cable managers provide a
strong, attractive method for organizing patch cords and maintaining the required bend radius. The hinged front panel has a magnetic closure
and conceals cables dressed between components and cable chases. Ample cable pass-throughs provided for dressing cables above, below,
to the sides and behind the cable manager. Finished in a durable black powder coat.
Depth
3-5/8”
HHCM-2 3-1/2” (2 RU)
3-5/8”
EIA/TIA Compliant
Spec. #
96-01003
for full
product
info.
A&E
Racking
Part #
Height
HHCM-1 1-3/4” (1 RU)
HHCM-2 (cover closed)
HHCM-2 (cover open)
HHCM-1 and HHCM-2 (shown with cabling)
Horizontal Cable Managers
EIA/TIA Compliant
Organize patch cords and maintain a required bend radius. Available in a wide variety of styles to suit any application. The D-Ring provides
a creative solution for adding individual D-Rings to a rack or on a wall using appropriate fasteners. For optimal performance, do not exceed a
50% fill rate when passing cables through cable rings. Constructed from 16-gauge steel, and finished in a durable black powder coat.
HCM-1
HCM-1V
HCM-1D
HCM-1DV
HCM-2D
HCM-2DV
HCM-2DR
HCM-1DR
D-Ring
Part #
Description
Panel Width
Cable Rings Fill Area
End Rings Fill Area
HCM-1
1-3/4” (1 RU) “micro-clip” style
19”
7/8 in.2
–
HCM-1V
1-3/4” (1 RU) “micro-clip” style, w/ end D-Rings
19”
7/8 in.
7-1/2 in.2
HCM-1D
1-3/4” (1 RU) “D-Ring”style
19”
3-1/8 in.2
–
HCM-1DV
1-3/4” (1 RU) “D-Ring”style, w/ end D-Rings
19”
3-1/8 in.2
7-1/2 in.2
HCM-2D
3-1/2” (2 RU) “D-Ring” style
19”
7-1/2 in.2
–
HCM-2DV
3-1/2” (2 RU) “D-Ring” style, w/ end D-Rings
19”
7-1/2 in.
7-1/2 in.2
HCM-1DR
1-3/4” (1 RU “D-Ring”, front & rear
19”
6-1/4 in.2
–
HCM-2DR
3-1/2” (2 RU) “D-Ring”, front & rear
19”
15 in.
–
D-Ring
wall mount/rackmount “D-Ring”
–
7-1/2 in.
2
2
2
2
–
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
11
CUSTOM WIDTHS AND RUNG PLACEMENT
AVAILABLE. CALL FOR DETAILS.
Ladder Sections
EIA/TIA Compliant
Spec. #
A complete line of 12”, 18”, and 24” wide, fully welded cable ladders. Cable ladder sections ship fully boxed,
which minimizes product damage and simplifies shipping and storage. Highly durable finish consists of 2 layers of
black powder coat and is exceptionally scratch resistant. Compatible with most popular brands and accessories of
cable ladders, these will work on both new and retrofit installations.
96-986
for full
product
info.
Models Available
CLH-WRS-xx
wall support angle
CLB-TSB-xx
triangle wall support
CLB-CSB-xx
center support bracket
CLH-5/8CHK
ceiling kit with
CLH-5/8ROD-6
threaded rod
CLH-HTS
horizontal 90º tee-splice
CLB-EDxx
end/side drop
CLB-90HB0xx
90º horizontal bends
top options
for racks/enclosures
CLH-EC-12
end caps
CLH-SS-12-2
side stand-off
CLH-ARxx
adjustable rung
12”, 18”, 24”
12”
12”
CLH-RSJ
ladder splice hardware
CLB-VI/VO90-xx
90º inside/outside bends
6”
.5”
6’, 10’
1.50”
.375” 1”
12" Wide Bulk Packs
12" Wide Part #
18" Wide Part #
24" Wide Part #
Description
CLB-6-12 (12 pieces)
CLB-6
CLB-6-W18
CLB-6-W24
6' long straight ladder section, black
10' long straight ladder section, black
CLB-10-12 (12 pieces)
CLB-10
CLB-10-W18
CLB-10-W24
CLB-90HB-4 (4 pieces)
CLB-90HB
CLB-90HB-W18
CLB-90HB-W24
90º horizontal bend, black
CLB-VI90-4 (4 pieces)
CLB-VI90
CLB-VI90-W18
CLB-VI90-W24
90º vertical inside bend, black
CLB-VO90-4 (4 pieces)
CLB-VO90
CLB-VO90-W18
CLB-VO90-W24
90º vertical outside bend, black
Junction and Splice Hardware - All Hardware has Black Finish
CLH-ADJH
CLH-RSJ
CLH-HTS
CLH-ADJT
Part #
CLH-HTS-6
Qty
6 pairs
CLH-90T
Description
horizontal 90º tee splice hardware
Part #
CLH-ADJH
Qty
1 pair
Description
adjustable horizontal splice hardware
CLH-ADJH-6
6 pairs
adjustable horizontal splice hardware
CLH-ADJT
1 pair
adjustable ladder end splice hardware
CLH-RSJ
1 pair
ladder end splice hardware
CLH-ADJT-6
6 pairs
adjustable ladder end splice hardware
CLH-RSJ-6
6 pairs
ladder end splice hardware
CLH-90T
1 pair
adjustable 90º tee splice hardware
horizontal 90º tee splice hardware
CLH-90T-6
6 pairs
adjustable 90º tee splice hardware
CLH-HTS
12
A&E
Cable Management
Cable Ladders
1 pair
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Cable Ladders
CLB-CSB-xx
CLB-TSB-xx
12" Wide (Bulk 6 Pack)
CLB-CSB-6
CLH-WRS-xx
12" Wide Part #
CLB-CSB
CLH-5/8CHK
18" Wide Part #
CLB-CSB-W18
CLH-RES
CLH-RWC
24" Wide Part #
CLB-CSB-W24
Description
center support bracket
CLB-TSB-6
CLB-TSB
CLB-TSB-W18
CLB-TSB-W24
triangle wall support bracket
CLH-WRS-6
CLH-WRS or CLH-WRS-W6-W12
CLH-WRS-W18-W24
CLH-WRS-W18-W24
ladder wall support angle
CLH-5/8CHK-6
CLH-5/8CHK
5/8” slotted ceiling kit, fits all widths
–
CLH-5/8ROD-12-4
12” long section 5/8” threaded rod, 4 pieces
–
CLH-5/8ROD-6
6’ long section 5/8” threaded rod, 1 piece
CLH-RES-6
CLH-RES
ladder end support hardware, fits all widths
CLH-RWC-6
CLH-RWC
ladder wall clamp, fits all widths
Cable Management
CUSTOM WIDTHS AND RUNG PLACEMENT
AVAILABLE. CALL FOR DETAILS.
Wall/Ceiling Mounts - All Hardware has Black Finish
Side, End Drops and Adjustable Rungs
12” Ladder
18” Ladder
CLH-ED11
24” Ladder
Adjustable Rung/Drop
CLH-ED11
CLH-ED11
CLH-ARD12
CLH-ED11
CLH-ED11
CLH-ED5
CLH-ED8
CLH-ED5
CLH-ED8
CLH-AR12
CLH-ED11
CLH-ED23
CLH-ED17
12" Wide (Bulk 4 Pack)
–
12" Wide Part #
CLH-AR12
18" Wide Part #
CLH-AR18
24" Wide Part #
CLH-AR24
Description
adjustable rung (no drop)
–
CLH-ARD12
CLH-ARD18
CLB-ARD24
adjustable rung drop with spools
CLH-ED11-4
CLH-ED11
CLH-ED17
CLH-ED23
–
CLH-ED5
end drop with spools
5” wide end drop with spools, fits all widths
–
CLH-ED8
8” wide end drop with spools, fits all widths
CLH-SD8-4
CLH-SD8
8” wide side drop with spools, fits all widths
Accessories
CLH-SPOOL-10
CL-GK
CLH-JBOLT
CLH-SS-12-2
Part #
CL-GK
Description
cable ladder bonding kit
Part #
CLH-5/8ROD-6
Description
6’ long section 5/8” threaded rod. 1 piece
CLH-EC-12
cable ladder end caps (12 pieces)
CLH-SS-12-2
12” high, side stand-off, 2 pieces
CLH-JBOLT
5/16" J-bolts and nuts (1 pair)
MK-LA
ladder adapter kit for MK-19-45-RL & RLA Series racks
CLH-SPOOL-10
cable management spools (10 pieces)
MW-LA
top option for DRK, MRK, WRK, VRK and VMRK Series enclosures
CLH-5/8ROD-12-4
12" long section 5/8" threaded rod, 4 pieces
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
13
Cable Management
Horizontal Lacer Bars
90º Bend Lacer Bars
EIA/TIA Compliant
These LBP-xxR90 series offset lacer bars are similar to our other offset round
lacer bars, but feature 90° bends to provide full-width support. Can also be
used to provide clearance around components that extend past the rear rackrail
(16-5/8” open width). 1/4” diameter rod with flattened ends.
Part #
Style
LBP-1.5R90 90º, 1.5” offset round rod
LBP-4R90
90º, 4” offset round rod
Qty
Part #
Style
10
LBP-6R90
90º, 6” offset round rod
10
10
LBP-10R90
90º, 10” offset round rod
10
Round Lacer Bars
Qty
EIA/TIA Compliant
Use the LBP-1R round lacer bar when a small profile is required and for lacing
small or individual horizontal cable runs. 1/4” diameter rod with flattened ends.
Part #
Style
Qty
LBP-1R
round rod
10
Rectangular Lacer Bars
EIA/TIA Compliant
Use the LBP-1S lacer bar when lacing cables vertically or horizontally. Aluminum
construction provides the ability to drill holes to attach tie saddles, mount
electrical boxes, etc. This lacer bar can also be used to support the rear of
equipment. 3/16” thick aluminum, 1/4” diameter rod with flattened ends.
Part #
Style
Qty
LBP-1S
rectangular bar
10
L-Shaped Lacer Bars
EIA/TIA Compliant
“L” shaped lacer bars are strong and provide fixed tie points. The LBP-2A,
LBP-4A and LBP-6A have a 2”, 4” and 6” offset, respectively. Choose the
appropriate offset bar based on the distance from the rear of equipment to
the rackrail.
Part #
Style
Qty
Part #
Style
Qty
LBP-1A
“L” bar
10
LBP-4A
“L” bar, 4” offset
10
LBP-2A
“L” bar, 2” offset
10
LBP-6A
“L” bar, 6” offset
10
Round Lacer Bars with Offset
EIA/TIA Compliant
Use the LBP-1.5 & LBP-1R4 when lacing small bundles or individual cables off
the rear of equipment, patch panels and other components to relieve cable stress
from the connections. Choose the appropriate offset based on the distance from
the rear of equipment to the rackrail. 1/4” diameter rod with flattened ends.
Part #
Style
Qty
Part #
Style
Qty
LBP-1R4
4” offset round rod
10
LBP-1.5
1.5” offset round rod
10
Horizontal Lacer Panel
UP1P
Use the LBP-LTF and UP1P for lacing large amounts of cable or mounting
devices. Two RU high, the LBP-LTF features a large flange, numerous cable tie
points & more surface for mounting.
Part #
LBP-LTF
EIA/TIA Compliant
Racking Height
Pre-Pack Qty
Panel Width
UP1P
1-3/4” (1 RU)
10
19”
LBP-LTF
3-1/2” (2 RU)
10
19”
Brush Grommet Panel
EIA/TIA Compliant
The brush grommet panel provides a clean, organized cable entry method when
mounted above any work surface. Features a built-in cable management tray,
available in one and two space versions. Also fits in opening on all MW Series
top options.
14
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Part #
Racking Height
Part #
Racking Height
BR1
1-3/4” (1 RU)
BR2
3-1/2” (2 RU)
Swing Frame Rack
12 RU - 27.22”h x 19.6”w x 12”, 18” or 24” d
20 RU - 41.22”h x 19.6”w x 12”, 18” or 24” d
25 RU - 49.97”h x 19.6”w x 18” or 24” d
Wall Mounts
Dimensions
UNIQUE FEATURE!
Open back wall
rack design mounts
over existing
conduit, telephone
equipment, etc.
Construction
14-gauge steel - 10-32 threaded
100 lb. weight
capacity,
guaranteed not
to sag when
mounted correctly!
Finish
Black powder coat
Weight Capacity
100 lbs.
Shipping Weight
90º opening with positive stop
to facilitate punch-down
12 RU - 31 lbs.
20 RU - 42 lbs.
25 RU - 46 lbs.
SFR-12-18
EIA/TIA Compliant
Spec. #
96-984
ENHANCED!
Compact
packaging
design
A&E
for full
product
info.
12” Depth
Part #
18” Depth
Description
Part #
24” Depth
Description
Part #
Description
SFR-12-12
12 RU swing frame wall rack,
12” deep, includes 50 rack screws
SFR-12-18
12 RU swing frame wall rack,
18” deep, includes 50 rack screws
SFR-12-24
12 RU swing frame wall rack,
24” deep, includes 50 rack screws
SFR-20-12
20 RU swing frame wall rack,
12” deep, includes 50 rack screws
SFR-20-18
20 RU swing frame wall rack,
18” deep, includes 50 rack screws
SFR-20-24
20 RU swing frame wall rack,
24” deep, includes 50 rack screws
SFR-25-18
25 RU swing frame wall rack,
18” deep, includes 50 rack screws
SFR-25-24
25 RU swing frame wall rack,
24” deep, includes 50 rack screws
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-815SC-NS
single circuit slim power strip (8) outlet, 15 Amp, 9 ft. cord
PB-XS
rackmount power bracket for PD-815SC and PD-815SC-NS power strips
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
shelving
U2
2 RU front mount shelf 14.5” deep, 50 lb. weight capacity
hardware
HP
100 pieces additional mounting screws
cable management
HCM-1D
1 RU D-Ring style cable manager
HCM-2D
2 RU D-Ring style cable manager
D-Ring
wall mount/rackmount D-Ring cable manager
TW12
cable management straps, 8” long, 12 pieces
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
15
Pivoting Panel Mount and Vertical Panel Mount
Wall Mounts
Pivoting Panel Mount
Spec. #
96-0210
A&E
for full
product
info.
Hinged to provide rear access to mounted components
• 6”, 12”, and 18” depths
• Steel construction
• Finished in a durable black powder coat
• Rack screws and hook and loop fasteners included
Top Covers and Doors
Security top covers and doors completely enclose the PPM for installation in
non-secure areas. Available for 12” and 19” deep models.
PPM-8-12
PPM-8-12
with PPM-LID12
and PPM-DO8
Part #
Security Top
Cover Part #
Security
Door Part #
Racking
Height
Overall
Height
Depth
Weight
Capacity
PPM-2
–
–
3-1/2” (2 RU)
5-3/4”
6”
20 lbs.
PPM-4
–
–
7” (4 RU)
9-1/4”
6”
20 lbs.
PPM-6
–
–
10-1/2” (6 RU)
12-3/4”
6”
30 lbs.
PPM-6-12
PPM-LID12
PPM-DO6*
10-1/2” (6 RU)
12-3/4”
12”
40 lbs.
PPM-8-12
PPM-LID12
PPM-DO8*
14” (8 RU)
16-1/4”
12”
60 lbs.
PPM-8-18
PPM-LID18
PPM-DO8*
14” (8 RU)
16-1/4”
18”
60 lbs.
*When using door option, top cover is required
Backless Pivoting Panel Mount
Designed to work over wall obstructions such as conduit or raceways.
• Opens 90º with positive stop to allow
for punch down of cables
• 16” depth, 40 lb. weight capacity
PPM-6-160B
• 6 RU height available
• Security cover and lid available
Part #
Description
PPM-6-16OB*
6 RU pivoting panel mount, open back, 16” deep
PPM-LID16
lid, fits 16” deep PPMs
*PPM-DO6 security door fits 6 RU PPMs
PPM-6-160B
closed
Vertical Equipment Mount
Versatile solution for wall mount racking where a protective enclosure is not required.
• Can accommodate all depths of equipment
• Mounts horizontally or vertically allowing versatile component placement –
under desktops, for example
• Heavy duty threaded rack rail, available in 2, 3 or 4 RU models
• Use two to provide 4-point mounting
• Includes hole for safety screw (for under desk mounting)
VPM-4
16
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Part #
Description
VPM-2
2 RU, vertical equipment mount
VPM-3
3 RU, vertical equipment mount
VPM-4
4 RU, vertical equipment mount
EIA/TIA Compliant
Hinged Panel Mount and Wall Mount Open Frame Rack
Hinged to provide rear access to mounted components
• 6” deep
• Steel construction
• Finished in a durable black powder coat
• Rack screws and hook and loop fasteners included
HPM-1
HPM-2
Part #
Racking Height
Part #
Racking Height
Part #
Description
HPM-1
1-3/4” (1 RU)
HPM-4
7” (4 RU)
HPM-LID
HPM-2
3-1/2” (2 RU)
HPM-6
10-1/2” (6 RU)
top dust cover acts as
an equipment shelf
EIA/TIA Compliant
Spec. #
HPM-4
HPM-6
96-212
A&E
for full
product
info.
Wall Mounts
Hinged Panel Mount
HPM-LID top dust
cover/equipment shelf
cut out in rear
for cable
pull-through
Adjustable Depth Hinged Panel Mount
Dual hinged mount provides exceptional rear access to rackmount components
• Simple adjustable depth accommodates components from 9” – 15”
• Built-in cable management
• Includes (4) 10-32 rack screws
• Grounding stud built-in and space indicators marked on rackrail
Part #
Description
Weight
Capacity
HPM-4-915
4 RU, adjustable depth 9” - 15”
15 lbs.
HPM-6-915
6 RU, adjustable depth 9” - 15”
20 lbs.
HPM-8-915
8 RU, adjustable depth 9” - 15”
25 lbs.
HPM-4-915
EIA/TIA Compliant
telescopes
from 9” - 15”
top view
showing rear access
Wall Mount Open Frame Rack
A self-squaring rack for mounting virtually any data or telecommunications component,
the wall mount open frame rack is quick and easy to assemble thanks to its self-aligning
design. The WM Series offers an effective method of wall mounting fiber-optic equipment
as its fixed design prevents kinking or breaking of glass fibers.
• Rugged steel construction
• 10-32 threaded rackrail
• Black textured powder coat finish
• Offered in two depths (12” and 18”)
• Heights ranging from 17-3/4” to 56-1/4”
• Includes rack screws
Part #
Overall Height
Racking Height
Depth
Weight Capacity
WM-8-12
17-3/4”
14” (8 RU)
12”
200 lbs.
WM-8-18
17-3/4”
14” (8 RU)
18”
150 lbs.
WM-15-12
30”
26-1/4” (15 RU)
12”
200 lbs.
WM-15-18
30”
26-1/4” (15 RU)
18”
150 lbs.
WM-30-12
56-1/4”
52-1/2” (30 RU)
12”
175 lbs.
WM-30-18
56-1/4”
52-1/2” (30 RU)
18”
125 lbs.
EIA/TIA Compliant
Spec. #
96-210
A&E
for full
product
info.
WM-15-18
shown with HCM-2D
horizontal cable manager
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
17
DRK Series Gangable Cable Management Rack Enclosure
Enclosures
Dimensions
44 RU - 83.5”h x 30”w x (31.5, 36, 42)”d
Construction
Welded steel
Finish
Black textured powder coat
Weight Capacity
Static load: 10,000 lbs.
UL Listed: 2,500 lbs.
Seismic: 755 lbs.
Seismic certified to the following codes and standards: 2007 & 2010 CBC;
2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition)
and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity
– Zone 4 or Seismic Design Category (SDC) “D”.
These are designed for Mission Critical and/ or High-Importance Installations in
locations with the highest level of seismicity and top floor or rooftop installations
including those within UBC and CBC Essential facilities or IBC, ASCE 7, and
NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor
(Ip) is 1.5. Seismic Certified load capacity of 755 lbs. when used with MRK-Z4
seismic floor anchor brackets.
EIA/TIA Compliant
Spec. #
96-967
30”
DRK19-44-31
KITTING SERVICE
Middle Atlantic offers an enclosure-configuring service, which
will allow your customers to receive a fully assembled cabinet.
Contact our Customer Service Department for assistance in
putting together your customer specific package.*
Have a configuration that
you repeatedly order?
Middle Atlantic can assign a kitted part number
for ease of ordering and repeat ordering.
*configuration charges may apply
18
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
for full
product
info.
A&E
31-1/2”,
36”, or 42”
Models Available
DRK Series Gangable Cable Management Rack Enclosure
#10-32 Tapped
Rails Part #
Cage Nut Rails
Part #
DRK19-44-31
DRK19-44-31PRO
7 ft. (44 sp.), 31” deep (24.25” useable) cabinet
include 2-pairs rackrail, 2 front ducts, partially vented rear door, top panels accepts a 10” fan
DRK19-44-36
DRK19-44-36PRO
7 ft. (44 sp.), 36” deep (28.75” useable) cabinet
include 2-pairs rackrail, 2 front ducts, partially vented rear door, top panels accepts a 10” fan
DRK19-44-42
DRK19-44-42PRO
7 ft. (44 sp.), 42” deep (34.75” useable) cabinet
include 2-pairs rackrail, 2 front ducts, partially vented rear door, top panels accepts a 10” fan
Description
Enclosures
FRAME ONLY
ENCLOSURE OPTIONS
Accessory Type
Part #
Description
front doors
DLVFD-44
perforated front door 70% open area
rear doors
side panels
DPVFD-44
plexi-vented front door
DPFD-44
smoked plexi-glass front door
DVRD-44
partially vented rear door
DSVRD-44
perforated rear door
DFVRD-44
slotted-vented rear door
DCLVRD-44
split perforated rear door
DCRD-44
split solid rear door
SPN-44-312
side panels for 31” deep cabinet (sold in pairs)
SPN-44-36
side panels for 36” deep cabinet (sold in pairs)
SPN-44-423
side panels for 42” deep cabinet (sold in pairs)
leveling feet
LF
leveling feet (set of four)
rackrails
DRK19-RR44
additional set of #10-32 mounting rails
caster bases
top options
DRK19-RR44PRO
pair of server style mounting rails
CBS-DRK-31
caster option for 31” deep cabinet
CBS-DRK-36
caster option for 36” deep cabinet
MW-ST
solid top panel
MW-LVT
large perforated top panel
MW-10FT-550CFM
top panel configured with one 10” fan provides 550 CFM
MW-6FT-660CFM
top panel configured with three 6” fans provides 660 CFM
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-2415SC-NS
60” power strip 24 outlet 15 Amp with 10 ft. cord with 5-15P plug
shelving
hardware
cable management
PD-2420SC-NS
60” power strip 24 outlet 15 Amp with 10 ft. cord with 5-20P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
PB-90
vertical power strip mounting bracket
VSA-1626
< 1 RU 4-point mounting shelf adjustable 16-26 deep, 400 lbs. weight capacity
VSA-2744
< 1 RU 4-point mounting shelf adjustable 27-44 deep, 400 lbs. weight capacity
U2V
2 RU front mount shelf 14.5” deep, 50 lb. weight capacity - vented
HP
100 pieces additional mounting screws
HP-6MM
100 pieces additional mounting screws
CN6MM-100
100 pieces 6MM cage nuts
LACE-44-OWP
6-pack vertical lacing strips 44 RU tail
DRK-44DUCT
optional rear duct (1 piece)
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
19
WMRK Series Server Enclosures
Enclosures
Dimensions
45 RU - 85”h x 24”w x (36, 42, 48)”d
42 RU - 80”h x 24”w x (36, 42, 48)”d
24 RU - 48.5”h x 24”w x (36, 42)”d
Construction
Welded steel
includes TEMP-DEC
temperature monitoring
module (configured
models only)
Finish
Black textured powder coat
Weight Capacity
Static load: 10,000 lbs.
UL Listed: 2,500 lbs.
Seismic: 1,090 lbs.
accepts RU saving
split rear door
which includes
3-point lock/latch
Shipping Weight
24 RU - 122 to 150 lbs. (frame only)
42 RU - 122 to 150 lbs. (frame only)
45 RU - 175 to 200 lbs. (frame only)
Seismic certified to the following codes and standards: 2007 & 2010
CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE
7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000
for use in areas of high seismicity – Zone 4 or Seismic Design
Category (SDC) “D”. These are designed for Mission Critical and/
or High-Importance Installations in locations with the highest level of
seismicity and top floor or rooftop installations including those within
UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000
Seismic Use Group III facilities.
For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load
capacity of 1,090 lbs. when used with WMRK-Z4 seismic floor anchor
brackets.
36”, 42” or 48”
24”
EIA/TIA Compliant
Spec. #
96-01079
A&E
for full
product
info.
WMRK-4236SVR
Models Available
Configured Models
The configured WMRK Series multi-vendor server rack ships fully outfitted to address the thermal, cable and power needs of a server
installation.
20
• 70% open area front door, locking
• 79% open area split rear door, locking
• 64% open area top
• Temperature monitoring module
• Vertical lacing strip, 3-1/4” width (42 RU only)
• 6 mm cage nuts, 100 quantity
•6 mm rack screws, 100 quantity
•20 Amp, 20 outlet (42 RU) or 10 outlet (24 RU) corded power strip
•Side panels (models with sides only)
•Ganging hardware (models without sides only)
•Leveling feet
36” Outside Depth
(33-1/2” Useable),
with sides Part #
36” Outside Depth
(33-1/2” Useable),
without sides Part #
42” Outside Depth (39-1/2” Useable),
with sides Part #
42” Outside Depth
(39-1/2” Useable),
without sides Part #
WMRK-4236SVR
WMRK-4236SVR-AB
WMRK-4242SVR
WMRK-4242SVR-AB
WMRK-2436SVR
WMRK-2436SVR-AB
–
–
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Racking Height
Overall Height
73-1/2” (42 RU)
79-5/8”
42” (24 RU)
48-1/4”
WMRK Series Server Enclosures
45 RU
42 RU
24 RU
Description
WMRK-4548
WMRK-4248
–
48” deep frame only, includes 2 sets server mounting rails and leveling feet
WMRK-4542
WMRK-4242
WMRK-2442
42” deep frame only, includes 2 sets server mounting rails and leveling feet
WMRK-4536
WMRK-4236
WMRK-2436
36” deep frame only, includes 2 sets server mounting rails and leveling feet
Enclosures
FRAME ONLY
ENCLOSURE OPTIONS
Accessory Type
45 RU Part #
42 RU Part #
24 RU Part #
Description
front doors
FD-45
FD-42
FD-24
solid front door
LVFD-WMRK-45
LVFD-WMRK-42
LVFD-WMRK-24
perforated front door, 70% open area
PFD-45
PFD-42
PFD-24
smoked plexi-glass front door
rear doors
side panels
MW-CRD-45
MW-CRD-42
MW-CRD-24
split solid rear door
MW-CLVRD-45
MW-CLVRD-42
MW-CLVRD-24
split perforated rear door, 79% open area
MW-CFRD-45
MW-CFRD-42
N/A
high CFM split rear door - 1320 CFM
SPN-45-48
SPN-42-48
N/A
side panels for 48” deep cabinet (sold in pairs)
SPN-45-42
SPN-42-42
SPN-24-42
side panels for 42” deep cabinet (sold in pairs)
SPN-45-36
SPN-42-36
SPN-24-36
side panels for 36” deep cabinet (sold in pairs)
leveling feet
LF
LF
LF
leveling feet (set of four)
rackrails
PROWMRK-ZRA-45
PROWMRK-ZRA-42
PROWMRK-ZRA-24
additional pair of Z-rail adaptors
PROWMRK-RR-45
PROWMRK-RR-42
PROWMRK-RR-24
additional pair of server style mounting rails
CBS-WMRK-36
CBS-WMRK-36
CBS-WMRK-36
caster option for 36” deep cabinet
caster bases
plenum bases
top options
CBS-WMRK-42
CBS-WMRK-42
CBS-WMRK-42
caster option for 42” deep cabinet
CBS-WMRK-48
CBS-WMRK-48
N/A
caster option for 48” deep cabinet
PBS-WMRK-36
PBS-WMRK-36
PBS-WMRK-36
plenum base option for 36” deep cabinet
PBS-WMRK-42
PBS-WMRK-42
PBS-WMRK-42
plenum base option for 42” deep cabinet
PBS-WMRK-48
PBS-WMRK-48
PBS-WMRK-48
plenum base option for 48” deep cabinet
ERK-ST
ERK-ST
ERK-ST
solid top panel
ERK-VT
ERK-VT
ERK-VT
vented top panel
ERK-10FT-550CFM
ERK-10FT-550CFM
ERK-10FT-550CFM
top panel configured with one 10” fan provides 550 CFM
ERK-6FT-440CFM
ERK-6FT-440CFM
ERK-6FT-440CFM
top panel configured with three 6” fans provide 660 CFM
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-2415SC-NS
60” power strip 24 outlet 15 Amp with 10 ft. cord with 5-15P plug
shelving
Hardware
cable management
PDT-2020C-NS
73” power strip, 20 outlet 20 Amp with 9 ft. cord with 5-20P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
VSA-1626
< 1 RU 4-point mounting shelf adjustable 16-26 deep, 400 lbs. weight capacity
VSA-2744
< 1 RU 4-point mounting shelf adjustable 27-44 deep, 400 lbs. weight capacity
U2V
2 RU front mount shelf 14.5” deep, 50 lb. weight capacity - vented
HP-6MM
100 pieces additional mounting screws
CN6MM-100
100 pieces 6MM cage nuts
LACE-44-OWP
6-pack vertical lacing strips 44 RU
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
21
MRK Series Gangable Rack Enclosures
10-32 Tapped Rails Part #
Server Mounting Rails Part #
Description
MRK-4431
MRK-4431PRO
44 RU 31” deep (29” useable) with solid rear door
MRK-4436
MRK-4436PRO
44 RU 36” deep (33.5” useable) with solid rear door
MRK-4442
MRK-4442PRO
44 RU 42” deep (39.5” useable) with solid rear door
MRK-2431
N/A
24 RU 31” deep (29” useable) with solid rear door
MRK-2436
N/A
24 RU 36” deep (33.5” useable) with solid rear door
Enclosures
FRAME ONLY
ENCLOSURE OPTIONS
Accessory Type
44 RU Part #
front doors
rear doors
side panels
40 RU Part #
37 RU Part #
24 RU Part #
Description
FD-44
FD-40
FD-37
FD-24
solid front door
LVFD-44
LVFD-40
LVFD-37
LVFD-24
perforated front door, 70% open area
VFD-44
VFD-40
VFD-37
VFD-24
perforated front door
PFD-44
PFD-40
PFD-37
PFD-24
smoked plexi-glass front door
PVFD-44
N/A
N/A
N/A
plexi vented front door
MW-VRD-44
N/A
N/A
N/A
partially vented rear door
MW-LVRD-44
MW-LVRD-40
N/A
N/A
large perforated rear door
MW-CLVRD-44
N/A
N/A
MW-CLVRD-24
split perforated rear door
MW-CFRD-44
N/A
N/A
N/A
high CFM split rear door - 1320 CFM
SPN-44-312
SPN-40-312
SPN-37-312
SPN-24-312
side panels for 31” deep cabinet (sold in pairs)
SPN-44-36
SPN-40-36
SPN-37-36
SPN-24-36
side panels for 36” deep cabinet (sold in pairs)
SPN-44-423
SPN-40-423
SPN-37-423
N/A
side panels for 42” deep cabinet (sold in pairs)
leveling feet
LF
LF
LF
LF
leveling feet (set of four)
rackrails
MV-RR44
MV-RR44
MV-RR44
MV-RR24
additional pair of 10-32 mounting rails
PROMRK-RR44
PROMRK-RR44
PROMRK-RR44
PROMRK-RR24
pair of server style mounting rails
CBS-MRK-31
CBS-MRK-31
CBS-MRK-31
CBS-MRK-31
caster base option for 31” deep cabinet
CBS-MRK-36
CBS-MRK-36
CBS-MRK-36
CBS-MRK-36
caster base option for 36” deep cabinet
CBS-MRK-42
CBS-MRK-42
CBS-MRK-42
CBS-MRK-42
caster base option for 42” deep cabinet
MW-ST
MW-ST
MW-ST
MW-ST
solid top panel
MW-LVT
MW-LVT
MW-LVT
MW-LVT
large perforated top panel
MW-10FT-550CFM
MW-10FT-550CFM
MW-10FT-550CFM
MW-10FT-550CFM
top panel configured with one 10” fan provides 550 CFM
MW-6FT-660CFM
MW-6FT-660CFM
MW-6FT-660CFM
MW-6FT-660CFM
top panel configured with three 6” fans provide 660 CFM
caster bases
top options
RECOMMENDED ACCESSORIES
Accessory Type
power strip
shelving
hardware
cable management
Part #
Description
PD-2415SC-NS
60” power strip, 24 outlet, 15 Amp with 10 ft. cord with 5-15P plug
PD-2420SC-NS
60” power strip, 24 outlet, 20 Amp with 10 ft. cord with 5-20P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
PDT-2020C-NS
73” power strip, 20 outlet 20 Amp with 9 ft. cord with 5-20P plug
VSA-1626
< 1 RU 4-point mounting shelf, adjustable, 16-26 deep, 400 lbs. weight capacity
VSA-2744
< 1 RU 4-point mounting shelf, adjustable, 27-44 deep, 400 lbs. weight capacity
U2V
2 RU front mount shelf 14.5” deep, 50 lb. weight capacity - vented
HP
100 pieces additional mounting screws
HP-6MM
100 pieces additional mounting screws
CN6MM-100
100 pieces 6MM cage nuts
LACE-44-OWP
6-pack vertical lacing strips 44 RU
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
23
Raised Floor Enclosure Support System™
Enclosures
Spec. #
96-923
A&E
for full
product
info.
What is the advantage of using the Raised Floor Enclosure Support System™?
The innovative Raised Floor Enclosure Support System™ from Middle Atlantic Products has been designed to simplify the installation of an
enclosure onto a raised floor, as well as provide improved access to the plenum below.
Select the best enclosure
for the application
Reduce installation
costs
Improved
Performance
• Install space saving 22” width racks to
maximize the number of enclosures
• Install wide, 30” cable management
enclosures for heavily populated enclosures
• Enclosures can be installed prior to
the raised floor
• Enclosures prewiring can be completed
before the raised floor is installed
• Provides complete access to the
plenum below the rack
• Affords improved access to cables
and connections
THE TYPICAL WAY - cabinets installed on top of raised floor,
tiles cut as necessary, hard to access.
ENCLOSED SUPPORT SYSTEM - installed prior to floor.
Supports tiles and allows easy removal.
PROVIDES IMPROVED CABLE MANAGEMENT - it is easy to
remove floor tiles & access cabling below the enclosure
Proper Thermal Management In A Raised Floor Application
Return
Air Grill
Fan
Front
High CFM
Active Exhaust
Rear Door
Raised Floor
Tiles
Vented
Grate
SIDE VIEW
SEISMIC CERTIFIED SOLUTIONS ALSO AVAILABLE
– from stock! Download tech spec. #96-01027
24
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
High Density Server
Raised Floor Enclosure Support System™
Enclosures
Building a Raised Floor Enclosure Support System™ is Easy!
1.
2.
3.
4.
Select the correct enclosure for the application
Select the correct base, based upon the type of enclosure, depth and
number of enclosures you want to group
Select the appropriate riser feet based on the height of the raised floor
Order the appropriate angles to support the adjoining raised floor tiles
1. RACK
2. BASE
The Raised Floor Enclosure Support System™ is equally suited for new and
retrofit installations. While raised floors create a unique set of challenges,
this solution allows the floor to be built around the system, not the other
way around.
3. RISER FEET
4. FLOOR SUPPORT ANGLE
Installation of a Raised Floor Enclosure Support System™ is Simple:
1. Install base, riser feet
and angles
2. Install raised floor tile around
the base
3. Install racks on base
4. Surrounding floor tiles can
be easily removed providing
complete access to wiring
Multiple Bases Can be Joined Together to Accommodate Any Size Systems
Riser bases feature cable pass-through laser knockouts for use
when joining multiple riser bases.
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
25
IDF Series Ceiling Mount Cabinet
Dimensions
12 RU - 24”h x 23.5”w x 28.75”d
16 RU - 31”h x 23.5”w x 28.75”d
Enclosures
typical four point mounting shown
(threaded rods required,
installer supplied)
Construction
Steel
Finish
includes 4 integral
gland grommets 4”
cable pass-throughs
Durable black powder coat
Weight Capacity
150 lbs.
EIA/TIA Compliant
Spec. #
96-01075
A&E
for full
product
info.
IDF-TM-1224BK
Part #
Description
IDF-TM-1224BK
12 RU, 24” deep, 21” useable depth
IDF-TM-1624BK
16 RU, 24” deep, 21” useable depth
IDF-ARB-24
optional rackrail bracket extender,
converts IDF to full front to rear adjustable rackrail
includes solid
locking front/
rear doors
includes
2 - 4-1/2”
exhaust fans
Includes power
distribution unit
AT NO EXTRA
CHARGE!
ALTERNATE MOUNTING METHODS
Includes safety lanyard
ensures a secure
installation (threaded
rods required,
installer supplied)
TWO POINT MOUNTING
to truss, with threaded rod
FOUR POINT MOUNTING
directly to UniStrut® beam
knockouts for conduit pass-through
to internal, standard eletrical box
a typical warehouse IDF installation
with optional dome camera mounted
underneath
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
27
Pivoting/Wall Mount Cabinets
CWR Series CableSafe™ Data Wall Cabinet
Dimensions
12 RU - 24.88”h x 26”w x (17, 22, 26, 32)”d
18 RU - 35.38”h x 26”w x (17, 22, 26, 32)”d
26 RU - 49.38”h x 26”w x (17, 22, 26, 32)”d
Weight Capacity
12 RU - 200 lbs.
18 RU - 200 lbs.
24 RU - 200 lbs.
UL Listed in
US and Canada
to 200 lbs.
EIA/TIA Compliant
Spec. #
96-01104
A&E
for full
product
info.
CWR-18-30PD4
Cabinet Features:
CWR racks and offset rail kits come with D-Ring
managers for additional cable management
•26” wide cabinet has ample space for patching.
Comes fully assembled to save time. Centered
wide-face 12-24 threaded rackrail is standard
•Includes D-rings for additional cable management
•Offset face rail for dressing cable to one side & rear
rackrail are optional
•Swing open center section allows for easy access to
equipment & cabling. Mounts left- or right-handed
•Engineered for passive cooling - optional fan
kit available
•Large opening in back pan for mounting over pull
boxes, electrical outlets, etc. Large 2” and 3”
knockouts for conduit and cable entry
•Bag of (50) 12-24 threaded mounting screws
included
shown with offset rail kit to allow
cable management to one side
Available with 4” depth front doors - call for details
17” Overall
15” Useable
Depth
22” Overall
20” Useable
Depth
26” Overall
24” Useable
Depth
32” Overall
30” Useable
Depth
Description
Overall
Width*
Useable
Height
CWR-12-17PD
CWR-12-22PD
CWR-12-26PD
CWR-12-32PD
2' (12 RU) data wall cabinet, centered rail, plexi front door
26"
12 RU
CWR-18-17PD
CWR-18-22PD
CWR-18-26PD
CWR-18-32PD
3' (18 RU) data wall cabinet, centered rail, plexi front door
26"
18 RU
CWR-26-17PD
CWR-26-22PD
CWR-26-26PD
CWR-26-32PD
4' (26 RU) data wall cabinet, centered rail, plexi front door
26"
26 RU
NOTE: For solid or vented door, replace “PD” with “SD” or “VD” in the part number. *Not including latch.
Accessories
Part #
28
Description
Part #
Description
CWR-FKIT
fan kit, 2 (95CFM) fans w/ hardware
CWR-OFRR12
12 RU off-set rail kit w/ D-Rings for CWR Series
CWR-RR12
rear rail kit, 12 RU, centered for CWR Series
CWR-OFRR18
18 RU off-set rail kit w/ D-Rings for CWR Series
CWR-RR18
rear rail kit, 18 RU, centered for CWR Series
CWR-OFRR26
26 RU off-set rail kit w/ D-Rings for CWR Series
CWR-RR26
rear rail kit, 26 RU, centered for CWR Series
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
DWR Series Wall Cabinet
Pivoting/Wall Mount Cabinets
Dimensions
12 RU - 28”h x 24.34”w x (17, 22, 26, 32)”d
18 RU - 38.6”h x 24.34”w x (17, 22, 26, 32)”d
24 RU - 49”h x 24.34”w x (17, 22, 26, 32)”d
Construction
Finish
Welded Steel
durable black textured powder coat
Weight Capacity
12 RU - 200 lbs.
18 RU - 250 lbs.
24 RU - 300 lbs.
UL Listed in
US and Canada
to 300 lbs.
Seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 &
2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009
editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category
(SDC) “D”. These are designed for Mission Critical and/or High-Importance Installations in
locations with the highest level of seismicity and top floor or rooftop installations including
those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use
Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load
capacity of 140 lbs. when used with DWRSR-ZL Latch.
US Patent #7,278,183
EIA/TIA Compliant
UNIQUE DUAL-PIVOT! allows
reversal of center section opening
without removing equipment
Spec. #
96-045
A&E
for full
product
info.
Includes 50 rack screws 10-32
DWR-18-22
Models Available
CABINET WITH PLEXIGLASS DOOR
17” Deep Part #
(15” Useable)
22” Deep Part #
(20” Useable)
26” Deep Part #
(24” Useable)
Description
DWR-12-17PD
DWR-12-22PD
DWR-12-26PD
2 ft. wall cabinet (28.06” overall height); 12 RU (21” useable height)
DWR-18-17PD
DWR-18-22PD
DWR-18-26PD
3 ft. wall cabinet (38.56” overall height); 18 RU (31.5” useable height)
DWR-24-17PD
DWR-24-22PD
DWR-24-26PD
4 ft. wall cabinet (49.06” overall height); 24 RU (42” useable height)
CABINET ONLY
17” Deep Part #
(15” Useable)
22” Deep Part #
(20” Useable)
26” Deep Part #
(24” Useable)
32” Deep Part #
(30” Useable)
Description
DWR-12-17
DWR-12-22
DWR-12-26
DWR-12-32
2 ft. wall cabinet (28.06” overall height); 12 RU (21” useable height)
DWR-18-17
DWR-18-22
DWR-18-26
DWR-18-32
3 ft. wall cabinet (38.56” overall height); 18 RU (31.5” useable height)
DWR-24-17
DWR-24-22
DWR-24-26
DWR-24-32
4 ft. wall cabinet (49.06” overall height); 24 RU (42” useable height)
ENCLOSURE OPTIONS
Accessory Type
12 RU Part #
18 RU Part #
24 RU Part #
Description
front doors
FD-12
FD-18
FD-24
solid front door
rackrail
VFD-12
VFD-18
VFD-24
perforated front door
PFD-12
PFD-18
PFD-24
smoked plexi-glass front door
DWR-RR12
DWR-RR18
DWR-RR24
additional set of #10-32 mounting rails
FAN KITS
17” Deep Part #
(15” Useable)
22” Deep Part #
(20” Useable)
26” Deep Part #
(24” Useable)
32” Deep Part #
(30” Useable)
Description
DWR-FK17
DWR-FK22
DWR-FK26
DWR-FK32
fan kits include (2) 4-1/2” fans, (4) guards, and vent blcokers to optimize airflow
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-815SC-NS
18” power strip with (8) 5-15R outlets and 10 ft. cord with 5-15P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
shelving
VSA-1626*
< 1 RU 4-point mounting shelf adjustable 16-26 deep, 400 lbs. weight capacity
U2V
2 RU front mount shelf 14.5” deep 50 lb. weight capacity - vented
HP
100 pieces additional mounting screws
hardware
*requires rear rackrail
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
29
Pivoting/Wall Mount Cabinets
SR Series Pivoting Floor Mount Cabinet
Dimensions
24 RU - 62.75”h x 24.34”w x (28, 32)”d
40 RU - 90.75”h x 24.34”w x (22, 28, 32)”d
46 RU - 101.25”h x 24.34”w x (28)”d
SR-UPS-BKT
Construction
Finish
Steel
Durable black powder coat
Weight Capacity
UL Listed in
US and Canada
to 500 lbs.
500 lbs.
ful
l9
0º o
pening
SR-40-22
EIA/TIA Compliant
Spec. #
96-045B
for full
product
info.
22” Deep
Part #
(20” Useable)
28” Deep
Part #
(26” Useable)
32” Deep
Part #
(30” Useable)
–
SR-24-28
SR-24-32
24 RU (42” useable height) pivoting floor/wall cabinet
(62-3/4” overall height)
SR-40-22
SR-40-28
SR-40-32
40 RU (70” useable height) pivoting floor/wall cabinet
(90-3/4” overall height)
–
SR-46-28
–
46 RU (80.5” useable height) pivoting floor/wall cabinet
(101-1/4” overall height)
A&E
Mounting kit
supports Middle Atlantic
UPS models for
easier mounting
in SR base section.
Seismic certified to the following codes and standards: 2007 & 2010
CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10
(2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in
areas of high seismicity – Zone 4 or Seismic Design Category (SDC) “D”.
These are designed for Mission Critical and/or High-Importance
Installations in locations with the highest level of seismicity and top floor
or rooftop installations including those within UBC and CBC Essential
facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities.
For all codes, the Importance factor Ip is 1.5. Seismic Certified load
capacity of 335 lbs. when used with DWRSR-ZL Latch.
Models Available
Sub-Plate Mounting Kit
Description
Optional sub-plate mounting kit (SR-SUB) allows
for the mounting of up to (4) 89-D type brackets,
(4) 1900 boxes or (1) Raco 3 gang box. Mount
up to (4) SR-SUB’s to each 40 or 46 space SR Series backpan, and up to (2) in each 24 space
SR Series backpan
ENCLOSURE OPTIONS
Accessory Type
24 RU Part #
40 RU Part #
46 RU Part #
Description
front doors
FD-24
FD-40
FD-46
solid front door
VFD-24
VFD-40
VFD-46
perforated front door
PFD-24
PFD-40
PFD-46
smoked plexi-glass front door
DWR-RR24
DWR-RR40
DWR-RR46
additional set of #10-32 mounting rails
rackrail
Part #
SR-SUB
89-bracket
(not included)
SR-SUB
RECOMMENDED ACCESSORIES
Accessory Type
Part #
Description
power strip
PD-2415SC-NS
60” power strip with (24) 5-15R outlets and 10 ft. cord with 5-15P plug
PD-815SC-NS
18” power strip with (8) 5-15R Outlets and 10 ft. cord with 5-15P plug
PD-915R
1 RU rackmount power distribution unit (9) outlet, 15 Amp, 9 ft. cord
PB-DWR
vertical power strip mounting bracket
thermal management
shelving
hardware
DWR-FK22
fan kit, fits 22” depth DWR, SR
DWR-FK26
fan kit, fits 26” depth DWR, SR
DWR-FK32
fan kit, fits 32” depth DWR, SR
VSA-1626*
< 1 RU 4-point mounting shelf adjustable 16-26 deep, 400 lbs. weight capacity - requires rear rackrails
VSA-2744*
< 1 RU 4-point mounting shelf adjustable 27-44 deep, 400 lbs. weight capacity - requires rear rackrails
U2V
2 RU front mount shelf 14.5” deep 50 lb. weight capacity - vented
HP
100 pieces additional mounting screws
*requires rear rackrail
30
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Low-Profile Wall Mount Horizontal Equipment Cabinet & Tilt Out Wall Cabinet
Pivoting/Wall Mount Cabinets
HDR Series
Ideal for mounting patch panels with switches, hubs, routers and other equipment.
• Beveled front door with flanges on all sides provides greater security for equipment
• Reversible hinged door with lock and padlockable latch
• Integral electrical box simplifies power distribution
• Constructed of 16-gauge steel,
• 24” wide by 36” high x 7-1/2” deep
• Finished in a durable putty powder coat
• Standard heavy-gauge, 10-32 threaded rackrail
• 4 total RUs for equipment mounting in two sections
• Ventilation slots on front cover address thermal management needs
• 4-1/2” fan kit available, mounts externally to maximize equipment mounting and
cable management space
• Cable management features include a 7” x 4” cable pass-through on backpan,
abundant cable tie points and integral lacing bar on top set of rackrail
• 24” length of hook and loop fasteners included to facilitate cable management
• Laser knockouts on the top, bottom and sides for cable entry
Part #
Racking Height
HDR-4
3-1/2” + 3-1/2” (2 RU + 2 RU)
HDR-4
beveled front door
provides enhanced security
HDR-FAN
optional external
mount fan
Easy Access to Equipment Connections
EIA/TIA Compliant
lift
swings
out
Spec. #
96-975
Description
HDR-FAN
external 4-1/2” fan kit & vent blocker
for full
product
info.
A&E
Part #
rotate
Upper bay rotates for easy access
to patch panel connections & positive
stop for punch downs
TOR Series
24-1/2”
Ideal for small sound systems, paging & patching applications in schools, hotels,
offices or anywhere a secure, low-profile wall mount solution is required.
• Two models available: surface mount or flush between studs
• Tamper resistant design ideal for use in non-secure areas
• Mount non-rackmount equipment using included clamp bars
• 10-32 threaded rackrail is adjustable with a 1-1/2” to 3-3/8” recess to
accommodate handles and knobs
• Up to 20” useable depth
• Durable, neutral putty finish
• Vented for effective passive thermal management
• Knockout provided in face to mount RPS Series remote power switch and
low-voltage Decora® devices
• Includes knockout to accommodate Middle Atlantic Products UCP Series universal
connector panels, mounts BNC, XLR and other popular connectors
• Cable management tie points, with knockouts provided in back box for cable
pass-through
Surface
Mount
Part #
Flush
Mount
Part #
Service
Position
Lower bay rotates out for
easy access to equipment
connections
Racking
Height
Outside
Depth
TOR-2-20RP 3-1/2” (2 RU) 4-7/16”
TOR-3-20SP
TOR-3-20RP 5-1/4” (3 RU) 6-3/16”
TOR-4-20SP
TOR-4-20RP
7” (4 RU)
When mounting TOR-3-20RP or TOR-4-20RP between 2x4 studs, order the partial recess
trim kit to finish the installation.
7-15/16”
Part #
TOR-PRT
EIA/TIA Compliant
Spec. #
96-01009
for full
product
info.
A&E
TOR-2-20SP
30-1/4”
keylocks closed
for security
front panel
equipment access
includes electrical
box for 120V
connections
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
31
Wall Mount Cabinets
Wall Mount Cabinets
WRP/WRS Series
• Specify a WRP or WRS for vertically mounting equipment on a wall surface
in a protective enclosure
• Unique design with 23” useable racking depth allows mounting of deeper
equipment vertically in a parallel-to-the-wall orientation for space efficiency
and aesthetics
• Standard adjustable heavy-gauge, 10-32 threaded rackrail
• Solid hinged body swings either left or right
• Angled, hinged plexiglass (WRP Series) or solid steel (WRS Series)
top cover allows convenient equipment access
• Top cover keyed separately from body keylock, providing user access to
equipment controls while limiting access to rear equipment connections
• Finished in a durable putty powder coat (WRP Series) or black textured
powder coat (WRS Series)
• Vented front and two bottom located fan mounting positions facilitate
thermal management
• Accepts two optional 4-1/2” fans
• Rackrail adjusts to provide a space from 1” to 4” between top cover and
equipment faces, allowing abundant room for D-Ring cable managers
WRP-6
shown in service position
25-1/4”
28-1/2”
Racking
Height
WRP-4
WRS-4
7” (4 RU)
WRP-6
WRP-8
Useable Weight
Depth Capacity
23”
150 lbs.
WRS-6 10-1/2” (6 RU)
23”
150 lbs.
WRS-8
23”
150 lbs.
14” (8 RU)
EIA/TIA Compliant
Spec. #
96-700
for full
product
info.
A&E
8-5/8”
12-1/8”
15-5/8”
Putty Black
Part #* Part #*
*Putty version has plexi cover,
black version has solid cover.
WRS-6
shown with top cover open
SPM Series Versa-Rack Sideways Equipment Mount
Mount network components flat against the wall
with this innovative all-steel sideways panel mount.
Versa-Racks can also be used to mount components under tables and desks
for commercial and classroom use. Each model features a single pair of high
quality heavy-gauge, 10-32 threaded rackrail that can be positioned in 3
locations to accommodate D-Ring cable managers. The low-profile sideways
panel mount is equipped with cable lacing points at the rear and includes a
steel cover to protect and conceal equipment. Includes rack screws.
Racking
Height
Weight
Capacity
SPM-2
3-1/2” (2 RU)
50 lbs.
SPM-4
7” (4 RU)
40 lbs.
EIA/TIA Compliant
96-220
for full
product
info.
3 position rackrail can be
set back to accommodate
cable managers
SPM-4
19-3/4” width
SPM-4
shown on side
with cover removed
32
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Spec. #
21-3/4”
depth
A&E
SPM-6
shown mounted on wall
Part #
Rack Lighting
Power Lighting and Distribution
Gooseneck Magnetic LED Worklight
This ultra bright worklight illuminates the inside of racks, for easy viewing of equipment
and cabling during system installation and servicing. 32 LED lights are positioned at the
ideal angle for high visibility and brightness – measured to be 395 Lumens*. Flexible 16”
long gooseneck allows light to be directed where it is needed most, and the strong, scratch
resistant magnetic base attaches to any steel surface. (*Contact us for details.)
Part #
Description
LT-GN-WL
magnetic worklight, gooseneck, includes 32 LED lights
LT-GN-WL
Gooseneck Rack Lights
These bright rack lights (187 Lumens*) allow for more rack visbility, and the flexible strong
goosenect lets you direct the light where it is needed most. The reliable, long lasting LEDs
have a 20,000 hour bulb life, and these lights include an on/off button for instant control.
Available as single light with USB connector or 120V adapter, or as a rackmount panel with
dual gooseneck lights. (*Contact us for details.)
LT-GN-PNL
Part #
Description
Powered By
LT-GN
gooseneck LED light with USB connector
LT-GN-PL
gooseneck LED light with 120V adapter
PDLT-815RVA, PD-915RV-RN, LT-1Rx or any
computer w/ standard USB port
any 120V power outlet, including vertical power strips
LT-GN-PNL
1 RU rackmount panel with
dual gooseneck LED lights
any 120V power outlet, including vertical power strips
LT-GN
LT-GN-PL
Rackmount Lighting
Retractable LED light provides evenly distributed illumination for component viewing.
# of
circuits
Amperage
Rear
Outlets
Surge
Protection
PDLT-815RV-RN
1
15 Amp
8
Yes, 2-stage with
remote notification
9'
Yes
9'
13-1/2"
black brushed
& anodized
PDLT-815RVA
1
15 Amp
8
Cord Chassis
Length Depth
13-1/2"
Finish
black
powder coat
LT-1R
light only
9'
13-1/2"
black
powder coat
LT-1RA
light only
9'
13-1/2"
black brushed
& anodized
EIA/TIA Compliant
Spec. #
LT-1RA
shown closed
96-01044
for full
product
info.
A&E
Part #
PDLT-815RV-RN
shown closed
PDLT-815RV-RN
shown with light out and lit
LT-DEC LED Light
Designed to fit any standard Decora® device opening, the LT-DEC opens and illuminates
when pressed. Running on a standard included 12 VDC power supply, multiple units can be
daisy-chained together to use only one outlet with the JDC-12X18 jumper. The jumper reduces the
number of power supplies required for an installation and can be used to power the LT-DEC light
and TEMP-DEC temperature display. Pre-configured panels are available with select pre-installed
Decora products.
Description
LT-DEC
retractable LED light
Spec. #
96-01046
for full
product
info.
LT2P
one space panel, pre-configured with 2 LT-DEC lights
LT2-T1P
1 RU panel, pre-configured with 2 LT-DEC lights, 1 TEMP-DEC temperature display
JDC-12X18
18”, 12 volt DC jumper wire, 2 pieces
LT2P
A&E
Part #
LT-DEC
LT-DEC
shown with light out
and lit
LT2-T1P
Temperature Display
This unit monitors internal enclosure temperature, provides an LED readout and fits into the
Decora® style opening at the top of Middle Atlantic racks. Features adjustable over temperature
setting with local and remote notification. 9’ cord with temperature probe and plug-in power
supply included. Optional jumper supplies power to additional 12VDC Decora units using a single
power source. The temperature display fits DWR, SR, ISRK and TOR Series enclosures.
Description
TEMP-DEC
temperature display
JDC-12X18
18”, 12 volt DC jumper wire, 2 pieces
Spec. #
96-01055
for full
product
info.
A&E
Part #
TEMP-DEC
overtemp remote
notification for
control system
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
33
Maintain Signal Integrity - Insist on SignalSafe™ Technology
Spec. #
6” length
96-01081
for full
product
info.
12” length
A&E
Power Lighting and Distribution
SignalSafe™ IEC Power Cords
SignalSafe™ Design
18” length
24” length
incorporates tightly twisted conductors to
virtually eliminate AC magnetic fields
36” length
48” length
Unwanted AC magnetic fields can cause problems in your installed systems and nearby equipment. Power cords under load, especially long
ones, are sources of AC magnetic fields. To minimize these effects in your systems, look for the stripe that identifies the SignalSafe technology.
SignalSafe power cords feature tightly twisted conductors to reduce the effects of AC magnetic fields.
4 key benefits:
1. Minimize AC magnetic interference: SignalSafe wiring cuts magnetic field strength by more than 80% over standard rubber power cords
2. Neater installations: SignalSafe cords come in 13 lengths from 6” to 300”. Eliminating excess cable length improves cable management,
appearance, and assists cooling airflow
3. More plug style options: Choose from straight plugs, or right or left angled, whatever meets your needs best.
4. Color coded: Standard SignalSafe cords are identified with a bold blue stripe.
cords designed for
cable/satellite boxes
New contrasting red stripe option can help you identify separate circuits.
now available
Insist on the stripe for signal Integrity!
Shown - with manufacturer supplied power cords
Shown - using the correct length IEC power cord
Angled plugs available
left
also available in red stripe
for circuit seperation
right
6" Length
Part # **
12" Length
Part # **
18" Length
Part # **
24" Length
Part # **
36" Length
Part # **
48" Length
Part # **
Plug Type
Cord Stripe
color
IEC-6X4
IEC-12X4
IEC-18X4
IEC-24X4
IEC-36X4
-
Straight
Blue
Wire
Gauge Qty.
14
4
IEC-6X20
IEC-12X20
IEC-18X20
IEC-24X20
IEC-36X20
IEC-48X20
Straight
Blue
14
20
IEC-6X20-RED
IEC-12X20-RED
IEC-18X20-RED
IEC-24X20-RED
IEC-36X20-RED
IEC-48X20-RED
Straight
Red
14
20
IEC-6X100
IEC-12X100
IEC-18X100
IEC-24X100
IEC-36X100
IEC-48X100
Straight
Blue
14
100
IEC-6X20-90L
IEC-12X20-90L
IEC-18X20-90L
IEC-24X20-90L
IEC-36X20-90L
IEC-48X20-90L
Low-Profile Left Hand
Blue
14
20
IEC-6X20-90R
IEC-12X20-90R
IEC-18X20-90R
IEC-24X20-90R
IEC-36X20-90R
IEC-48X20-90R
Low-Profile Right Hand
Blue
14
20
IEC-6X20SC*
IEC-12X20SC*
IEC-18X20SC*
IEC-24X20SC*
IEC-36X20SC*
IEC-48X20SC*
Straight
Blue
18
20
* Denotes cable/satellite cord. ** Length refers to the cord only, and does not include the connectors.
NEW!
Single Unit
IEC Cords
72" Length 96" Length 120" Length
Part # **
Part # **
Part # **
IEC-72X1
34
IEC-96X1
IEC-120X1
144" Length
Part # **
180" Length
Part # **
240" Length
Part # **
300" Length
Part # **
Plug Type
Cord Stripe
color
IEC-144X1
IEC-180X1
IEC-240X1
IEC-300X1
Straight
Blue
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Wire
Gauge Qty.
14
1
Vertical Power Products
Spec. #
96-01031
for full
product
info.
A&E
Choose The PDT Series For The Thinnest, Lightest,
Most Configurable Vertical Power Strips
The complete selection of PDT Series Configurable Thin Power Strips consists
of pre-configured strips in three different lengths. In stock and ready to ship, the
PDT Series strips feature multiple circuit, amperage and termination choices while
occupying a minimal amount of space in the rack. These factory-assembled thin
power strips with integrated J-Box are field configurable for isolated (technical) or
non-isolated ground. All strips feature a lightweight aluminum chassis and a black
anodized finish. ETL Listed in the US and Canada.
• Hardwired models can be field configured to operate as a single or dual circuit - installer’s choice!
• Unique design on hardwired models allows for isolated
(technical) ground configurability in the field - installer’s choice!
multiple circuits
are color coded
PDT-1015C-NS
outlet spacing
accommodates ‘wall-wart’
style power supplies!
PDT-1015C-M-NS
with local
Amp meter
PDT-2X1015
metered
Power Lighting and Distribution
PDT Series Configurable Thin Vertical Power Strips
Corded
Part #
Chassis Length Amperage # of Outlets Outlet Type
Local Meter
Standard #
PDT-1015C-RN
37-3/4"
15 Amp
10
5-15R
9' cord w/NEMA 5-15P Plug 2-stage surge w/remote notification & circuit breaker
No
1, 2, 3, 4
PDT-1015C-NS
37-3/4"
15 Amp
10
5-15R
9' cord w/NEMA 5-15P Plug
circuit breaker only
No
1, 3
PDT-1015C-NS20
37-3/4"
15 Amp
10
5-15R
20' cord w/NEMA 5-15P Plug
circuit breaker only
No
1, 3
15 PDT-1015C-M-NS
Amp PDT-1615C-NS
37-3/4"
15 Amp
10
5-15R
9' cord w/NEMA 5-15P Plug
circuit breaker only
Yes
1, 3
33-1/2"
15 Amp
16
5-15R
9' cord w/NEMA 5-15P Plug
circuit breaker only
No
1, 3
72-3/4"
15 Amp
20
5-15R
9' cord w/NEMA 5-15P Plug 2-stage surge w/remote notification & circuit breaker
No
1, 2, 3, 4
PDT-2015C-RN
20
Amp
Termination
Protection
PDT-2015C-NS
72-3/4"
15 Amp
20
5-15R
9' cord w/NEMA 5-15P Plug
circuit breaker only
No
1, 3
PDT-2015C-M-NS
72-3/4"
15 Amp
20
5-15R
9' cord w/NEMA 5-15P Plug
circuit breaker only
Yes
1, 3
PDT-1020C-NS
37-3/4"
20 Amp
10
5-20R
9' cord w/NEMA 5-20P Plug
circuit breaker only
No
1, 3
PDT-1620C-NS
33-1/2"
20 Amp
16
5-20R
9' cord w/NEMA 5-20P Plug
circuit breaker only
No
1, 3
PDT-2020C-NS
72-3/4"
20 Amp
20
5-20R
9' cord w/NEMA 5-20P Plug
circuit breaker only
No
1, 3
PDT-2020C-RN
72-3/4"
20 Amp
20
5-20R
9' cord w/NEMA 5-20P Plug 2-stage surge w/remote notification & circuit breaker
No
1, 2, 3, 4
PDT-2020C-M-NS
72-3/4"
20 Amp
20
5-20R
9' cord w/NEMA 5-20P Plug
circuit breaker only
Yes
1, 3
PDT-2020TL-NS
72-3/4"
20 Amp
20
5-20R
9' cord w/NEMA L5-20P Plug
circuit breaker only
No
1, 3
PDT-2020TL-M-NS
72-3/4"
20 Amp
20
5-20R
9' cord w/NEMA L5-20P Plug
circuit breaker only
Yes
1, 3
Hardwired
Part #
Circuit Arrangement
Standard #
15
Amp PDT-2X1015T (2) 15 Amp
20
5-15R
72-3/4"
J-Box
12
Field Configurable
1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2
1, 2
20
5-15R
72-3/4"
J-Box
12
Field Configurable
1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2
1, 2
20 PDT-2X1020 (2) 20 Amp
Amp PDT-2X1020T (2) 20 Amp
20
5-20R
72-3/4"
J-Box
12
Field Configurable
1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2
1, 2
20
5-20R
72-3/4"
J-Box
12
Field Configurable
1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2
1, 2
PDT-2X1015
Circuits # of Outlets Outlet Type Chassis Length Termination Wire Gauge Isolated (Technical Ground)
(2) 15 Amp
PD Slim Series High Density Slim Power Strips
15
Amp
20
Amp
Spec. #
PD-815SC-NS
96-976
for full
product
info.
A&E
Choose The PD Slim Series for Thin, High Density,
Pre-Configured Power Strips
High density slim power strips, contain a number of outlets that have been
spaced to accommodate plug-in power supplies, resulting in no wasted
outlets! Measuring 1-1/4” deep by 15/8” wide, these power strips provide
maximum usability while taking up a minimum of space. Ships complete with
10’ power cord, terminated with a NEMA 5-15P or NEMA 5-20P plug, 15 Amp
or 20 Amp circuit breaker and mounting system. UL and CSA Listed.
PB-XS
PD-2415SC-NS
rackmount power
bracket for PD-815SSC
& PD-815SC-NS
Part #
Chassis Length
Amperage
# of Outlets
Outlet Type
Termination
Protection
Local Meter
PD-815SC
18"
15 Amp
8
5-15R
10' cord w/NEMA 5-15P Plug
surge & circuit breaker
No
Standard #
1, 2, 3, 4
PD-815SC-20
18"
15 Amp
8
5-15R
20' cord w/NEMA 5-15P Plug
surge & circuit breaker
No
1, 2, 3, 4
PD-815SC-NS
18"
15 Amp
8
5-15R
10' cord w/NEMA 5-15P Plug
circuit breaker only
No
1, 3
PD-815SC-PBSH
18"
15 Amp
8
5-15R
10' cord w/NEMA 5-15P Plug
surge & circuit breaker
No
1, 2, 3, 4
PD-2415SC
60"
15 Amp
24
5-15R
10' cord w/NEMA 5-15P Plug
surge & circuit breaker
No
1, 2, 3, 4
PD-2420SC-NS
60"
20 Amp
24
(2) 5-20R, (22) 5-15R 10' cord w/NEMA 5-20P Plug
circuit breaker only
No
1, 3
PD-2415SC-NS
60"
20 Amp
24
(2) 5-20R, (22) 5-15R 10' cord w/NEMA 5-20P Plug
circuit breaker only
No
1, 3
1.Conforms to UL Standard 1363
2.Conforms to UL Standard 1449, 3rd Ed.
3.Certified to CSA Standard C22.2 No. 21
4.Certified to CSA Standard C22.2 No. 8
5.Conforms to UL Standard 1640
6.Certified to CSA Standard C22.2 No. 14M91
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
35
Power Lighting and Distribution
Vertical Power Products
PD Series Vertical Power Strips
Spec. #
96-938
Choose The PD Series For The Widest Selection Of Pre-Configured
Vertical Power Strips
The PD Series is a comprehensive vertical power strip line comprised of 17
pre-configured strips in four different sizes - all available and ready to ship
from stock. Featuring multiple circuit, amperage, and termination choices,
stock PD Series strips can satisfy many power requirements right off the shelf.
All strips are constructed from 16-gauge steel, finished in a durable black
powder coat and are ETL Listed in the US and Canada.
A&E
for full
product
info.
PD-2X615
Power Strips Are In Stock With:
•Both 15 and 20 Amp circuits
•Isolated (technical) ground circuits
•Single and dual circuits (with color-coded outlets for each circuit)
•Multiple MOV surge and spike protection (non-MOV strips available,
also available without circuit breaker protection)
•Circuit breaker protection (non-protected strip available,
also available without surge breaker protection)
•Multiple termination choices: cord with plug, metal flex with tails, or J-box
PD-1415C
PD-2X620J
PD-1020J-IG
All Middle Atlantic Products power strips feature unique mounting lances and
quick-clips, and have been engineered to attach to the rackrail brackets on all of
our welded racks. Quick-clips may also be attached to wood racks, as well as to
walls and other surfaces by using appropriate fasteners.
PD-620C-NS
PD Series 30 Amp Vertical Power Strip
The PD Series Dual Circuit 30 Amp Power Distribution strip supplies power on
two circuits to15 Amp equipment. With 12 duplexes (24 outlets) and a 9’ cord,
this power strip allows connection to uninterruptible power supplies. Ideal for
high density server cabinets, this PD Series strip features dual circuit breakers
with a lock-out pin to prevent accidental tripping of the breaker.
ETL Listed in the US and Canada.
PD-2X1215TL-30CB
L5-30
30 Amp plug
Corded
Part #
15
Amp
20
Amp
Chassis Length Amperage # of Outlets Outlet Type
Termination
Protection
Local Meter
Standard #
PD-615C
26-1/2"
15 Amp
6
5-15R
9' cord w/NEMA 5-15P Plug
surge & circuit breaker
No
1, 2, 3, 4
PD-615C-NS
26-1/2"
15 Amp
6
5-15R
9' cord w/NEMA 5-15P Plug
circuit breaker only
No
1, 3
1, 2, 3, 4
PD-1015C
40"
15 Amp
10
5-15R
9' cord w/NEMA 5-15P Plug
surge & circuit breaker
No
PD-1015C-NS
40"
15 Amp
10
5-15R
9' cord w/NEMA 5-15P Plug
circuit breaker only
No
1, 3
PD-1415C
57"
15 Amp
14
5-15R
9' cord w/NEMA 5-15P Plug
surge & circuit breaker
No
1, 2, 3, 4
PD-1415C-NS
57"
15 Amp
14
5-15R
9' cord w/NEMA 5-15P Plug
circuit breaker only
No
1, 3
PD-2X1215TL-30CB
56-1/2"
2 (15) Amp
24
5-15R
9' cord w/NEMA L5-30P Plug
circuit breaker only
No
5,6
PD-620C-NS
26-1/2"
20 Amp
6
5-20R
9' cord w/NEMA 5-20P Plug
circuit breaker only
No
1, 3
PD-1020C-NS
40"
20 Amp
10
5-20R
9' cord w/NEMA 5-20P Plug
circuit breaker only
No
1, 3
PD-1220C-NS
57"
20 Amp
12
5-20R
9' cord w/NEMA 5-20P Plug
circuit breaker only
No
1, 3
Hardwired
Part #
15
Amp
20
Amp
36
Circuit Arrangement
Standard #
PD-1215J-S
(1) 15 Amp
Circuits # of Outlets Outlet Type Chassis Length
12
5-15R
30-1/2"
Termination
J-Box
Wire Gauge Isolated (Technical Ground)
14
No
1-1-1-1-1-1-1-1-1-1-1-1
1, 2
PD-1215
(1) 15 Amp
12
5-15R
57"
3/8” flex, 36” length
14
No
1-1-1-1-1-1-1-1-1-1-1-1
1, 2
PD-2X615
(2) 15 Amp
12
5-15R
57"
3/8” flex, 36” length
14
No
1-1-2-2-1-1-2-2-1-1-2-2
1, 2
PD-620J-IG
(1) 20 Amp
6
5-20R
30-1/2"
J-Box
12
Yes
1-1-1-1-1-1
1, 2
PD-1020J-IG
(1) 20 Amp
10
5-20R
44"
J-Box
12
Yes
1-1-1-1-1-1-1-1-1-1
1, 2
PD-2X620J
(2) 20 Amp
12
5-20R
61"
J-Box
12
No
1-1-2-2-1-1-2-2-1-1-2-2
1, 2
PD-1220J-IG
(1) 20 Amp
12
5-20R
61"
J-Box
12
Yes
1-1-1-1-1-1-1-1-1-1-1-1
1, 2
PD-1220J
(1) 20 Amp
12
5-20R
61"
J-Box
12
No
1-1-1-1-1-1-1-1-1-1-1-1
1, 2
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Multi-Mount™ Rackmount Power and Spike Bonding Hardware
The versatile mounting options, compact form factor and high outlet density let installers put outlets
wherever they need them.
Spec. #
96-01095
for full
product
info.
Surge protected models also feature:
• Two stages of protection, with remote and local surge
status notification
• LED power indication
Multi-Mount Rackmount Power
A&E
All models feature:
• Reversible, adjustable mounting ears for flexible installation options
• Mixed outlet orientations to accommodate various plug types
• Compact form factor takes up minimal space
• SignalSafe™ power cord minimizes the effects of AC magnetic fields
EIA/TIA Compliant
Multi-Mount with Surge Protection
and Notification
Power Lighting and Distribution
Multi-Mount™ Rackmount Power
front
PD-2015R-HH-NS
PD-1815R-RN
rear
PD-2015R-NS
2-stages of
surge protection
with notification
Part #
# of Circuits
Amperage
Front Outlets
Rear Outlets
Surge Protection
Cord Length
Chassis Depth
Front Power Switch
PD-1815R-RN
1
15 Amp
9
9
Yes, 2-stage w/remote notification
9'
4"
–
PD-1820R-RN
1
20 Amp
9
9
Yes, 2-stage w/remote notification
9'
4"
–
PD-2015R-NS
1
15 Amp
10
10
No
9'
4"
–
PD-2015R-HH-NS
1
15 Amp
10
10
No
9'
4"
illuminated switch/combo breaker
for front 10 outlets only
PD-2020R-NS
1
20 Amp
10
10
No
9'
4"
–
Spike: Bonding/Ganging Hardware
A unique, time-saving method for bonding racks!
• Eliminate bonding wires run between racks, while providing lowest impedance
ground possible
• Self-piercing at bonding points – no need to remove paint
• Displaces paint without compromising the corrosion protection of the painted
surface eliminating the need for anti-oxidizing protection products required by
other bonding methods
• Handy installation tool provided to ensure ease of installation and proper torquing
Part #
Circuit
BOND-G24
spike series 24 piece rack bonding/ganging hardware
PATENT PENDING
reverse side of washer
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
37
Rackmount Power
front
EIA/TIA Compliant
front
96-01041
for full
product
info.
rear
PD-915R and PD-915RC-20
PD-915R-PL
Spec. #
96-939
for full
product
info.
PD-915RV-RN
front
front
front
rear
rear
rear
PD-815R-PL
A&E
rear
Spec. #
A&E
Power Lighting and Distribution
Rackmount Power Distribution, Control, and Sequencing
PD-915RV-RN
PD-920R-NS
front
front
rear
rear
PD-815RA-PL
typical rackmount
power shape
PD-920R and PD-920RC-20
Part #
# of
Circuits
Amperage
Front
Outlets
Rear
Outlets
Surge
Protection
Cord
Length
PD-915R-PL
1
15 Amp
1 (15 Amp)
8
Yes
powder coat
9'
9"
–
LED Only
horizontal
PD-815R-PL
1
15 Amp
–
8
Yes
powder coat
9'
9"
–
LED Only
horizontal
Finish
Chassis
Depth
LED Light
Options**
Front Power
Switch
Outlet
Orientation
PD-815RA-PL
1
15 Amp
–
8
Yes
brushed & anodized
9'
9"
–
LED Only
horizontal
PD-915RV-RN
1
15 Amp
1 (15 Amp)
8
Yes, 2-stage w/ remote notification
powder coat
9'
9"
front & rear
Yes
vertical
PD-915R
1
15 Amp
1 (15 Amp)
8
Yes
powder coat
9'
9"
–
Yes
horizontal
PD-915RC-20
1
15 Amp
1 (15 Amp)
8
Yes
powder coat
20'
9"
–
Yes
horizontal
horizontal
PD-920R
1
20 Amp
1 (15 Amp)
8
Yes
powder coat
9'
9"
–
Yes
PD-920RC-20
1
20 Amp
1 (15 Amp)
8
Yes
powder coat
20'
9"
–
Yes
horizontal
PD-920R-NS
1
20 Amp
1 (15 Amp)
8
No
powder coat
9'
9"
–
Yes
horizontal
**LED model # LT-GN, see pg. 114
Dry Contact Controlled Power, Ideal for Simple Reboot
A&E
Spec. #
This simple, cost effective approach means that you can use an existing control system, or even a simple remote switch,
96-01136
to control system or component power. Ideal for rebooting components or providing an easy user power-down capability.
for full
product
• No computer required; use existing control system or remote power switches
• Built-in 2-stage surge suppression with
info.
remote notification
• Either 2 or 6 contact-closure controlled outlets on rear depending on model
• 9 total outlets (1 on front unswitched, 8 on rear)
• Settings for momentary or maintained control style, normally open or
normally closed
• LED power indicators
front
front
rear
rear
PDC-915R-2 (2 controlled outlets)
outlet and surge
status notification
PDC-915R-6 (6 controlled outlets)
typical
shape
Rear Outlets
Part #
# of Circuits Amperage Front Outlets # of Controlled Outlets
# of Non-Controlled Duplex Outlets
Surge Protection
Cord Length
Chassis Depth
Front Power Switch
PDC-915R-2
1
15 Amp
1
2
6
Yes, 2-stage w/ remote notification
9’
9"
Yes
PDC-915R-6
1
15 Amp
1
6
2
Yes, 2-stage w/ remote notification
9’
9"
Yes
6-Step Sequencing
Custom times available - call for details.
Power units that feature sequencing allow you to control the order the equipment is powered on & off.
This reduces the possibility of circuit overload due to excessive in-rush current. Additionally, powering
on amplifiers after source or processing equipment protects speakers from damage.
• Local or remote control
• Adjustable sequencing delays (see A&E for details)
38
96-940
•LED power indication
for full
product
info.
front
front
rear
rear
rear
PDS-2X315R
PDS-620R
PDS-615R
Spec. #
Part #
# of Circuits
Amperage
Channels of Sequencing
PDS-615R
1
15 Amp
6
# of Sequenced Outlets # of Non- Sequenced Outlets Surge Protection
6 (1 per channel)
1
No
9’
9"
Yes
PDS-2X315R
2
15 Amp
6
6 (1 per channel)
1
No
9’
9"
Yes
PDS-620R
1
20 Amp
6
6 (1 per channel)
1 (15 Amp)
No
9’
9"
Yes
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
A&E
front
EIA/TIA Compliant
Cord Length Chassis Depth
Front Power Switch
High CFM Rear Doors and Controller
Spec. #
96-01093
for full
product
info.
Structural Features
• Ideal for hot aisle/cold aisle applications where air return is above hot aisle, because
exhaust air is directed upward toward air returns
• Excellent when enclosure is highly populated with NVR’s/DVR’s or servers that are front
intake/rear exhaust-type
• Finished in a durable black textured powder coat
A&E
Great solution when top mounted fans are not enough to move the required CFM.
Thermal Management
• Pre-configured with six 6” fans. These fans have adjustable locations and can be arranged
where they are most needed
• Additional fans can be added to increase total CFM. Doors can accept up to 16 total fans
to boost total air movement up to 3,520 CFM for maximum cooling
• A high-capacity thermostatic fan controller is available – see bottom of this page
Thermal Management
Removes hot air from densely populated server enclosures.
Cable Management
• Each door has a removable 48” SignalSafe™ IEC cord to allow for doors to be plugged into
separate circuits. Shorter IEC cords can be substituted for improved cable management.
Regulatory / Certifications
• GREENGUARD Indoor Air Quality Certified for Children and Schools (the most strict level)
• UL Listed in the US and Canada
Part #
Description
Fits
Free Air CFM
MW-CFRD-45
45 RU split fan rear door
WMRK
1,320
MW-CFRD-44
44 RU split fan rear door
MRK, WRK, VRK
1,320
MW-CFRD-42
42 RU split fan rear door
D-CFRD-44
44 RU split fan rear door
MWCFRD-FKIT
additional 6” fan for MW-CFRD and D-CFRD
High CFM Split Rear Door
Supply
Duct
MW-CFRD-XX
WMRK
1,320
High CFM
DRK Split Rear Door 1,320
220
High CFM Split Rear Door
Return
Air Duct
Return
Duct
MW-CFRD-XX
Front
Raised
Floor Tiles
adjustable fan panels
(8 per half door)
Vent
Grate
shorter IEC cords can be used to
simplify cable management
Side View
Side View
Proper Air Conditioning
Airflow and Rack Placement
Proper Forced Air on Raised Floor,
Vented Floor Grate Placement
Heavy-Duty Fan Thermostatic Controller for High CFM Rear Doors
•
•
•
•
•
•
Saves energy by controlling fans proportional to heat
One unit can power up to 16 fans in a fully populated system
Setting for thermostatic temperature control
Setting for proportional or snap action
One RU; mounts at top or bottom with flexible mounting ears
ETL Listed in the US and Canada
thermostastic control saves energy
Part #
FC-CFRD
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
39
UQFP Series Ultra Quiet Fan Panels
EIA/TIA Compliant
The two RU Ultra Quiet Fan Panel System provides smart cooling and monitoring to ensure a reliable
installation in areas where fan noise is not an option, including boardrooms, classrooms, offices, houses
of worship, etc. Thermostatic, proportional speed DC fan control ensures ultra quiet operation by varying fan speed based
on enclosure temperature. Overtemp notification, local and remote, offers additional operation monitoring. A unique feature
of the system provides notification in the event of fan failure via a local display or remote signal to an external alarm device.
• 100 CFM cooling capacity (4 fan models), 50 CFM cooling capacity (2 fan models)
• Digital processor varies fan speed based on enclosure temperature for ultra quiet operation
• Front panel rack temperature and alert display provides instant system status (‘D’ models only)
• On-board digital processor monitors rack temperature via external sensor
• Local and remote notification of over temperature and fan fault can be sent to a control system
UQFP-2D
UQFP-2
UQFP-4D
UQFP-4
Overtemp Notification
Spec. #
96-01037
for full
product
info.
A&E
Thermal Management
Thermal Management Products
Remote
User Definable
Overtemp Setting
Fan Failure
Notification Local &
Remote Display
Free
Air
Rating
Max
Sound
Level
Racking
Height
3
3
3
3
50 CFM
24 dB
3-1/2” (2 RU)
3
3
3
3
3
100 CFM
27 dB
3-1/2” (2 RU)
2
3
–
3
–
–
50 CFM
24 dB
3-1/2” (2 RU)
4
3
_
3
_
_
100 CFM
27 dB
3-1/2” (2 RU)
120V
Part #*
# of
Fans
Local LED
Local Display
UQFP-2D
2
3
UQFP-4D
4
UQFP-2
UQFP-4
*international versions available
Quiet Fan Panels
QFP-1
QTFP-2
Occupying three RU, these fan panel assemblies provide quiet cooling for demanding
environments. Each assembly comes complete with fan(s) and grille(s) installed. Available in
a black brushed and anodized, or black textured powder coat finish; cord and plug included.
120V
Anodized Part #*
120V
Textured Part #*
Racking
Height
Free Air dB
Rating
# of Fans
Installed
Free
Air CFM
QFP-1
QTFP-1
5-1/4” (3 RU)
<30 dBA
one
50
QFP-2
QTFP-2
5-1/4” (3 RU)
<33 dBA
two
100
*international versions available
Fan Panels
Fan panels accommodate all standard 4-1/2” fans. 3 RU (5-1/4”) high, they are made from
16-gauge flanged aluminum. Offered in a black textured powder coat or black brushed and
anodized finish.
Anodized Part #
Textured Part #
Racking Height
Accommodates
FP1
TFP1
5-1/4” (3 RU)
one 4-1/2” fan
FP2
TFP2
5-1/4” (3 RU)
two 4-1/2” fans
FP3
TFP3
5-1/4” (3 RU)
three 4-1/2” fans
FP2
40
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Thermal Management Products
Thermal
CoolingManagement
Fan Tray System
Fan tray system lets you locate fans directly above vents on hot equipment to help hot air get
moving in the right direction for rack cooling systems.
• Uses from 3 to 8 quiet 4” DC fans (69 CFM for each fan)
• 8 fan mounting positions & optional add-on fans let you locate fans exactly where needed
• Energy-saving thermostatic control for automatic on/off as needed
• Powered by a single power cord
• Occupies only one RU
• Adjustable mounting range of 18” to 32”
Part #
Description
EIA/TIA Compliant
Free Air CFM
3 fan tray
207
6 fan tray
414
FT-FAN
add-on 4” DC fan
69
FTA-3
Spec. #
96-01137
for full
product
info.
A&E
FTA-3
FTA-6
18” - 32”
range
FTA-6
fans can
be positioned
where they are
most needed
High Quality Fans
Spec. #
120V
Part #**
Size
Depth
Free Air
dB
Rating
Free
Air
CFM
95
FAN
4-1/2” 1-1/2”
39 dBA
QFAN
4-1/2” 1-1/2”
for full
product
info.
FAN-10
FAN-6
Fan Guards
Fitting 4-1/2”, 6” and 10” fans, fan guards
are “Hamburger grille” style & have a black
powder coat finish, includes hardware.
<30 dBA
50
FAN-6
6”
1-1/2”
49 dBA
220
Part #
Fits
FAN-10
10”
3-1/2”
49 dBA
550
GUARD
4-1/2” fan
BMF-FAN10
10”
4-1/4”
60 dBA
825
**international versions available
96-01063
GUARD-6
6” fan
GUARD-10
10” fan
A&E
Featuring smooth, ball-bearing design, the 120V fans mount flush and come in 4-1/2”, 6”
and 10” models. QFAN quiet fan includes guard with a black powder coat finish and is
great for minimizing noise. AXS-FAN features a slim design for mounting in AXS Series
racks. BMF-FAN10 provides 825 CFM of cooling for enclosures with a high heat density.
Mounting hardware and cord included with each unit.
complete with
black powder
coat finish guard
QFAN
GUARD
GUARD-6
GUARD-10
Fan Kits
Fan kits include (2) 4-1/2” fans, (4) guards, and the necessary vent blockers to optimize
the airflow.
Part #
Fits
Part #
Description
DWR-FK17
DWRxx17
CWR-FKIT
fan kit, 2 (95 CFM) fans w/ hardware
DWR-FK22
DWRxx22/SRxx22
DWR-FK26
DWRxx26
DWR-FK32
DWRxx32/SRxx32
Multiple Fan Cord
Filter Kit
Save outlets by operating two, three or
four fans from a single power outlet with
the multiple fan cord. Factory-installed
on integrated fan tops.
The three RU washable filter is 1”
thick and is housed in 18-gauge
perforated steel. Mounts in enclosures for use
as a filtered vent panel.
Part #
Description
FANCORD-2X1 fan cord, accommodates two fans
FANCORD-3X1 fan cord, accommodates three fans
Part #
Racking Height
FANCORD-4X1 fan cord, accommodates four fans
FILTER
5-1/4” (3 RU)
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
41
Accessories
Security Covers and Accessory Panels
Hinged Security Doors
secure installer zone
VSDR-12
user zone
secure installer zone
SSDR-12
Keylocked security doors allow front access to a select portion of rackmount equipment
and are available in plexiglass, vented, and solid styles. Mount equipment which needs to
be secured behind these doors in the “installer zone” to keep unauthorized users from
tampering. Keep equipment which needs to be client-accessed in the open portion of the
rack in the “user zone.”
Solid Part # Knob
Clearance 1-3/8”
Plexi Part # Knob
Clearance 1-1/8”
Vented Part # Knob
Clearance 1-3/8”
Racking
Height
SSDR-8
PSDR-8
VSDR-8
14” (8 RU)
SSDR-12
PSDR-12
VSDR-12
21” (12 RU)
SSDR-15
–
–
26-1/4” (15 RU)
SSDR-16
PSDR-16
VSDR-16
28” (16 RU)
SSDR-20
PSDR-20
VSDR-20
35” (20 RU)
SSDR-21
–
–
36-3/4” (21 RU)
typical installation
Hinged Plexiglass Security Covers
Incorporating a steel frame and a keylocked 3/16” smoked-gray plexiglass door, our SECL
Series locking security covers are offered in 2, 3, 4, and 8 RU sizes. Each unit’s depth of
1-1/2” easily clears controls on most equipment.
SECL-4
Part #
Racking Height
Part #
SECL-2
3-1/2” (2 RU)
SECL-4
Racking Height
7” (4 RU)
SECL-3
5-1/4” (3 RU)
SECL-8
14” (8 RU)
Fixed Perforated Security Covers
Eliminate the prospect of tampering with these tough security covers. Offered in regular or fine
perforation styles (models S and SF respectively), each cover is 1” deep. Includes installed
rubber edging that won’t mar the equipment you’re trying to protect. To enhance the level of
security, use the patented Guardian Series™ security bit and HSK rack screws.
S2
regular perf. pattern
Type
Allows unobstructed
view of knob settings,
64% open area
SF2
fine perf. pattern
Allows sight of LEDs,
most secure,
25% open area
Part #
Description
S1
1-3/4” (1 RU) regular perf. pattern
S2
3-1/2” (2 RU) regular perf. pattern
S3
5-1/4” (3 RU) regular perf. pattern
S4
7” (4 RU) regular perf. pattern
SF1
1-3/4” (1 RU) fine perf. pattern
SF2
3-1/2” (2 RU) fine perf. pattern
SF3
5-1/4” (3 RU) fine perf. pattern
SF4
7” (4 RU) fine perf. pattern
Brush Grommet Panel
The brush grommet panel provides a clean, organized cable entry method when mounted
above any work surface. Features a built-in cable management tray, available in one and
two space versions. Also fits in opening on all MW Series top options.
BR1
EIA/TIA Compliant
Part #
Racking Height
Part #
Racking Height
BR1
1-3/4” (1 RU)
BR2
3-1/2” (2 RU)
VTB Light Blocking Vent Panels
VTB Series light blocking vent panels provide a high percentage of open area (64%) and
pre-installed light blocking material to provide superior ventilation while blocking view of
internal wiring.
• Sturdy steel construction
• 64% open area
• Flanged Panel
• Flat black powder
VTB-1
EIA/TIA Compliant
42
Part #
Racking Height
Part #
Racking Height
Part #
Racking Height
VTB-1
1-3/4” (1 RU)
VTB-2
3-1/2” (2 RU)
VTB-3
5-1/4” (3 RU)
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Vent and Blank Panels
EIA/TIA Compliant
96-050-1
VTF Series
• Sturdy steel construction
• Flanged Panel
• 25% open area
• Flat black powder coat
for full
product
info.
VTF2
64% Open Area Perf Part #
25% Open Area Perf Part #
Racking Height
VT1
VTF1
1-3/4” (1 RU)
VT2
VTF2
3-1/2” (2 RU)
VT3
VTF3
5-1/4” (3 RU)
VT4
VTF4
7” (4 RU)
VT2
EVT/EVTA Series Vent Panels
EIA/TIA Compliant
for full
product
info.
EVT2
Flat Black Part #
Anodized Black Part #
Racking Height
EVT1
EVTA-1
1-3/4” (1 RU)
EVT2
EVTA-2
3-1/2” (2 RU)
EVTA-2
EB/FEB Series Blank Panels
EIA/TIA Compliant
Spec. #
96-001-1
for full
product
info.
1/2 and 1/3 Space
Panels available,
please see the
Master Catalog
for details.
Flanged Part #
Flat Part #
Racking Height
EB1
FEB1
1-3/4” (1 RU)
EB2
FEB2
3-1/2” (2 RU)
EB3
FEB3
5-1/4” (3 RU)
EB4
FEB4
7” (4 RU)
EB5
FEB5
8-3/4” (5 RU)
EB6
FEB6
10-1/2” (6 RU)
A&E
Economical steel panels finished in a durable flat black powder coat finish
EB Series
FEB Series
• Sturdy steel construction
• Sturdy steel construction
• Flanged Panel
• Flat Panel
EB2
FEB1
PBL/PHBL Series Blank Panels
EIA/TIA Compliant
Spec. #
96-001-1
for full
product
info.
PHBL Series
• Aluminum construction
• Flat Panel
A&E
Lightweight aluminum panels finished in a durable flat black powder coat ideal for machining.
PBL Series
• Aluminum construction
• Flanged Panel
A&E
EVTA Series
• Aluminum construction
• Flanged Panel
• 17% open area
• Black anodized finish
Spec. #
96-050-1
EVT Series vent panels provide an economical solution with a vertical slotted design.
The EVTA series has a black and brushed anodized finish.
EVT Series
• Sturdy steel construction
• Flanged Panel
• 17% open area
• Flat black powder coat
A&E
VT Series open perforated panels provide the highest open area of all our vent panels to allow
superior ventilation. VTF Series fine perforated series panels limits viewing for aesthetics.
VT Series
• Sturdy steel construction
• Flanged Panel
• 64% open area
• Flat black powder coat
Spec. #
Accessories
VT/VTF Series Perforated Vent Panels
PBL-2
Flanged Part #
Flat Part #
Racking Height
PBL-1
PHBL-1
1-3/4” (1 RU)
PBL-2
PHBL-2
3-1/2” (2 RU)
PBL-3
PHBL-3
5-1/4” (3 RU)
PBL-4
PHBL-4
7” (4 RU)
PHBL-2
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
43
EIA/TIA Compliant
Spec. #
96-01025
for full
product
info.
A&E
Accessories
Rackmount LCD Keyboard and Rackmounts for LCDs
four-point mount
for stability
RM-KB-LCD17
Rackmount LCD Keyboard
The Rackmount LCD Keyboard and Touchpad can be installed wherever rackmount control
and system monitoring is required and can be used for a wide range of applications
including network security and system performance monitoring. The 17” LCD monitor is
capable of supporting 1280 x 1024 screen resolution, and is also available with an 8 or
16 port KVM switch. With its space saving, single RU design and dual-slide functionality,
the rackmount LCD monitor can reside in the open position for system monitoring while
the keyboard is in the closed position. These units feature rear articulating cable carriers for strain relief and a bright active
matrix LCD display for ergonomic viewing of monitoring applications. Standard 105 key
keyboard with integrated touchpad. 6’ connector cable included, and auto detects 120V
or 240V power. This unit has a range of front to rear mounting of 18-1/4” to 27-3/4”
(overall depth is 24-1/2”, this unit will extend through the back of shallower racks).
Works internationally with customer supplied cord.
Part #
Screen
Size
Resolution
Racking
Height
KVM
Switch
PS/2/USB
Cords Included
RM-KB-LCD17
17”
1280 x 1024
1-3/4” (1 RU)
–
–
RM-KB_LCD17X8KVM
17”
1280 x 1024
1-3/4” (1 RU)
8 port
4
RM-KB-LCD17X16KVM
17”
1280 x 1024
1-3/4” (1 RU)
16 port
8
shown in closed position
PS2/USB-4C
working position screen opens with keyboard
recessed for monitoring
Now available
with KVM Switch!
separate slides let you stow
keylocked but leave screen
open for monitoring
EIA/TIA Compliant
96-01120
A&E
RM-LCD-MV
fixed enclosed
backpan style
rear view of RM-KB-LCD17X8KVM
Your choice of five mounting styles
• Generous front to back adjustment
• Versatile rackmounting of LCD screen from 15” to 19”, including some 20” monitors
• Includes both VESA 75 and VESA 100 mounting patterns
• RM-LCD-MT can mount larger monitors, up to 32” depending on weight
• Two styles:
–Enclosed backpan – fixed, pivot/tilt, articulating
–Open panel – fixed, pivot/tilt, best choice for 16:9 monitors
Part #
RM-LCD-MK
tilt enclosed
backpan style
RM-LCD-MT
articulating enclosed backpan style
(monitor not included)
44
includes PS/2 and USB cables
Rackmounts for LCDs
Spec. #
for full
product
info.
PS/2 and USB cables, 4 pieces
Racking Height
Description
Weight Capacity
RM-LCD-MV
15-3/4” (9 RU)
LCD rackmount, backpan style, VESA mount
35 lbs.
RM-LCD-MK
15-3/4” (9 RU)
LCD rackmount, backpan style, tilt mechanism
35 lbs.
RM-LCD-MT
15-3/4” (9 RU)
LCD rackmount, articulation
35 lbs.
RM-LCD-PNLV
5-1/4” (3 RU)
LCD rackmount, open panel style, VESA mount
27 lbs.
RM-LCD-PNLK
5-1/4” (3 RU)
LCD rackmount, open panel style, tilt mechanism
27 lbs.
RM-LCD-PNLV
fixed open panel style
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
RM-LCD-PNLK
tilt open panel style
MS/UFA Shelves and Keyboard Sliding Shelves
This innovative new shelf was designed to mount small items conveniently in the front
or rear of a rack while providing abundant cable management and device tie down
points. Pattern of holes and slots accommodates nearly any mounting hole pattern,
and can also be used for wire tie or other fastening approaches. Surprisingly strong for
their size, these shelves will solve many of your small item mounting challenges in any
standard rack. NOTE: Must be installed using standard 10-32 or 5mm rack screws
into threaded rackrail.
Useable
Shelf Area
Part #
Pre-Pack
Qty
11”
useable
shelf depth
MS-11
Accessories
MS Series Shelves
Weight
Capacity
MS-11
1/2"h x 17-1/2"w x 11"d
1
15 lbs.
MS-11-4
1/2"h x 17-1/2"w x 11"d
4
15 lbs.
MS-5.5
1/2"h x 17-1/2"w x 5-1/2"d
1
30 lbs.
MS-5.5-4
1/2"h x 17-1/2"w x 5-1/2"d
4
30 lbs.
5-1/2”
MS-5.5
UFA Shelves and UFAF Face Panels
“Universal Face-After” shelves designed to mount small items conveniently in the front
or rear of a rack while providing outstanding cable management and small device tie
down points. These shelves feature the unique ability to mount a faceplate after the
shelf is installed and populated, providing an attractive and secure covering.
UFA-8
Shelf Part # Racking Height Useable Shelf Area Pre-Pack Qty Weight Capacity Incl. Panel
UFA-8
1-3/4" (1RU)
17-1/4"w x 8"d
1
35 lbs.
–
UFA-8-4
1-3/4" (1 RU)
17-1/4"w x 8"d
4
35 lbs.
–
UFA-14.5
1-3/4" (1RU)
17-1/4"w x 14-1/2"d
1
25 lbs.
–
UFA-14.5-4
1-3/4" (1 RU)
17-1/4"w x 14-1/2"d
4
25 lbs.
–
UFA-8-F1
1-3/4” (1RU)
17-1/4"w x 8"d
1
35 lbs.
1 RU
UFA-8-F2
3-1/2" (2 RU)
17-1/4"w x 8"d
1
35 lbs.
2 RU
8” useable
shelf depth
UFA-14.5
shown with UFAF-2A
Panel Part #*
Racking Height
Finish
Panel Part #*
Racking Height
Finish
UFAF-1
1-3/4" (1RU)
black powder coat
UFAF-3
5-1/4” (3 RU)
black powder coat
UFAF-1A
1-3/4" (1 RU)
black brushed and anodized
UFAF-3A
5-1/4” (3 RU)
black brushed and anodized
UFAF-2
3-1/2” (2 RU)
black powder coat
UFAF-4
7” (4 RU)
black powder coat
UFAF-2A
3-1/2” (2 RU)
black brushed and anodized
UFAF-4A
7” (4 RU)
black brushed and anodized
14-1/2” useable
shelf depth
*Panels can be used with any UFA Shelf model
Rackmount Computer Keyboard w/ Sliding Shelf
EIA/TIA Compliant
Model RM-KB rackmount computer keyboard system occupies 1-3/4” (1RU) and includes
a high-quality full 101 key AT style keyboard, with touchpad and padded wrist-rests.
Articulating arm provides effective cable management. Comes with USB adapter.
Finished in a durable black powder coat.
Part #
Description
Racking Height
RM-KB
rackmount computer keyboard
1-3/4” (1 RU)
hinged arm
for cable
management
adjustable
17” - 25”
RM-KB
Keyboard Sliding Shelf
EIA/TIA Compliant
Accommodates keyboards with a maximum width of 15-15/16” and depth of 9-3/8”.
Articulating arm provides effective cable management.
Part #
Description
Racking Height
KB-SS
keyboard sliding shelf
1-3/4” (1 RU)
adjustable
17” - 25”
KB-SS
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
45
Accessories
Rackshelves
Heavy-Duty Sliding Shelf
•Deep full extension shelf allows for easy maintenance of your components right
on the shelf
•Durable black powder coat finish
adjustable
mounting range
21” to 30”
SSHD-28
Part #
Racking Height
Shelf Area
Weight Capacity
SSHD-28
3-1/2” (2 RU)
16-7/8” x 28”d
200 lbs.
Heavy-Duty Sliding Shelf with Removable Face Option
•Comes with mounting ears pre-assembled for quick installation
•Full extension lockout shelf allows for easy maintenance of your components right on the shelf
•Allows access to cable, wiring and connections from the front of the enclosure
•Optional lightweight removable cover panel
•3 front-to-rear rail mounting ranges:
–12-1/2” to 16-3/8”
–23” to 26-3/4”
–27-3/8” to 29-1/8”
•23-1/8” overall depth and 23” useable depth with foot holes
•Durable steel construction with black finish
SS4-23VTR
SS-VTR-CVR4
removable cover
panel shown with
SS4-23VTR
Part #
Racking Height
Shelf Area
Description
Weight Capacity
SS4-23VTR
7” (4 RU)
15-7/8” x 23”d
sliding shelf
75 lbs.
SS5-23VTR
8-3/4” (5 RU)
15-7/8” x 23”d
sliding shelf
75 lbs.
SS-VTR-CVR4
7” (4 RU)
–
removable cover
–
SS-VTR-CVR5
8-3/4” (5 RU)
–
removable cover
–
Full Extension Sliding Shelf
14-3/4”
rear ears
adjustable
15-1/8” to 23-7/8”
extends a full 14”
SS
Part #
Shelf Area
Weight Capacity
SS
17-1/2”w x 14-3/4”d
50 lbs.
EIA/TIA Compliant
Spec. #
96-043-1
for full
product
info.
A&E
17-1/2”
locks in the
“out” position
The SS sliding shelf is both functional and rugged. Capable of latching in an open or
closed position, the shelf slides on ball bearings and extends a full 14” and mounts to
any rack (rear rackrail required in steel racks). Occupies slightly more than a
single RU. NOTE: Fits in racks with a minimum 15-1/8” from front to rear rails.
Laminated Service Sliding Shelf
14”
rear ears
adjustable
15-1/8” to 23-7/8”
extends a full 11-3/8”
Part #
Shelf Area
Weight Capacity
SSL
16-3/4”w x 14”d
35 lbs.
EIA/TIA Compliant
Spec. #
96-043-1
for full
product
info.
Single-Bay Writing/Computer Keyboard Shelf
18”
19”
FWS
46
The FWS fixed single bay writing/computer keyboard shelf bolts quickly to any 19” rack
to create an ideal workspace. With an attractive, black laminate top made from 3/4”
furniture-grade MDF board, it occupies 2 RUs below and comes complete with special
rail-mounting hardware.
Part #
Depth
Weight Capacity
FWS
18”
100 lbs.
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
A&E
SSL
16-3/4”
Filling just a single RU, SSL sliding shelf extends 11-3/8” on nylon roller slides equipped
with positive-stop lockouts. A telescopic rear support mounts to any rack (rear rackrail
required in steel racks). The shelf itself is made with an attractive black laminate material.
NOTE: Fits in racks with a minimum 15-1/8” from front to rear rail.
Rackshelves
cabling lacing slots built-in
• Fully ventilated bottom and side areas for maximizing heat dissipation
• Includes 3 rear brackets to prevent components from sliding backwards
• Allows optional PD-815SC-PBSH (15 Amp, 8 outlet surge protected power strip) to be
attached to the rear of the shelf
• Allows attachment of optional clamping bars to secure components
Racking
Height
Overall
Depth*
Useable
Depth
Weight
Capacity
U2V
3-1/2” (2 RU)
14-9/16”
14-3/8”
50 lbs.
U3V
5-1/4” (3 RU)
14-9/16”
14-3/8”
70 lbs.
7” (4 RU)
15-1/2”
15-5/16”
85 lbs.
U4V
*Power strip on rear adds 2” to overall depth of shelf
EIA/TIA Compliant
Spec. #
96-047
for full
product
info.
U4V
A&E
Part #
Accessories
Fully Vented Utility Shelf
shown with optional
-C clamping bars
allows optional PD-815SC-PBSSH
to be attached to the rear of the shelf
Utility Rackshelves
• Accommodate components up to 17-3/8” wide
• Finished in a durable black powder coat
• Made from 16-gauge steel
• Individually boxed
Racking
Height
Overall
Depth
Useable
Depth
Weight
Capacity
U1
1-3/4” (1 RU)
10-3/4”
10-1/16”
35 lbs.
U2
3-1/2” (2 RU)
14-9/16”
14-3/8”
50 lbs.
U3
5-1/4” (3 RU)
14-9/16”
14-3/8”
70 lbs.
U4
7” (4 RU)
15-1/2”
15-5/16”
85 lbs.
EIA/TIA Compliant
Spec. #
96-047
for full
product
info.
A&E
Part #
U2
Master Pack Quantity Discount Available - please call
Partially Vented Deep Utility Shelf
cabling lacing slots built-in
17-3/4” deep by 5-1/4” high, this partially vented rackshelf has a 60 lb. weight capacity
and a rear flange slotted for horizontal cable management. Constructed from 16-gauge
steel and finished in a black powder coat.
Racking
Height
Overall
Depth
Useable
Depth
Weight
Capacity
U317
5-1/4” (3 RU)
17-7/8”
17-3/4”
60 lbs.
EIA/TIA Compliant
Spec. #
96-047
for full
product
info.
A&E
Part #
U317
Vented Center Mount Shelf
• Vented bottom aids cooling
• Durable black powder coat finish
• Supports up to 50 lbs.
• 18” deep
Part #
Racking Height
Overall Depth
Useable Depth
Weight Capacity
U2MS
3-1/2” (2 RU)
17-1/4” x 18”d
50 lbs.
60 lbs.
U2MS
cabling lacing slots built-in
Shallow Depth Rackshelf
Designed to mount smaller components, wireless units and other non-rackmount
equipment. Includes hook-and-loop strips for component mounting.
• Features an enhanced ventilation pattern
• Constructed from 16-gauge steel
• Finished in a durable black powder coat
Part # Racking Height Depth Weight Capacity
1-3/4” (1 RU)
10”
25 lbs.
*Master Pack Quantity Discount Available - please call
EIA/TIA Compliant
UTR1
Spec. #
96-047
for full
product
info.
A&E
UTR1
10”
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
47
Rackshelves - 4 Point Adjustable Depth
Accessories
Telescoping Full Depth Heavy Duty 4 Point Shelf
The most versatile, heavy duty shelf available! Unlike standard adjustable
shelves, the entire VSA shelf telescopes to reach rear rail, providing a
range of useable depths from 16” to 44”. Providing the greatest useable
depth in its class and featuring a 400 lb. weight capacity, the heavy-duty
VSA is ideal for even the deepest components. Constructed of hemmed
16-gauge steel and finished in a durable black powder coat, the VSA is
fully vented for superior cooling and features many tie points for
enhanced cable management.
adjustable 16” to 26”
VSA-1626
1-1/4” slots allow users to strap
equipment to shelf, if desired
Part #
Racking Height
Overall Depth
Weight Capacity
VSA-1626
1-1/2” (<1 RU)
17.25”w x 16” (min.) to 26” (max) d
400 lbs.
VSA-2744
1-1/2” (<1 RU)
17.25”w x 27” (min.) to 44” (max) d
400 lbs.
Easy to mount design requires less open RU to install other than 4-point shelves
EIA/TIA Compliant
Spec. #
96-01080
HOT TIP! Increase useable
width from 17-3/16” to
the useable width of the
encosure by inverting the
VSA shelf!
adjustable 27” to 44”
1-1/2”
height
VSA-2744
Adjustable 4 Point Rackshelf
21-1/2”
useable shelf depth
rear ears
adjustable
19-1/2” to 28”
With a front to rear mounting adjustment range from 19-1/2” to 28”
deep, the versatile AS3-22 shelf is vented and rackmounts most video
decks and tower CPUs. Built expressly for heavy equipment, ships
ready-to-assemble with included hardware and supports 300 lbs.
NOTE: Fits in racks with a minimum 19-1/2” from front to rear rail.
Part #
Racking
Height
Shelf
Area
Weight
Capacity
AS3-22
5-1/4” (3 RU)
17-3/8”w x 21-1/2”d
300 lbs.
EIA/TIA Compliant
AS3-22
Adjustable Deep Rackshelf
25-1/2”
useable shelf depth
rear ears
adjustable
23-1/2” to 32-1/2”
VDS
48
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
The VDS shelf is a partially vented mounting solution for most deep
equipment. This shelf has a front to rear mounting adjustment range
from 23-1/2” to 32”. NOTE: Fits in racks with a minimum 23-1/2”
from front to rear rail.
Part #
Racking
Height
Shelf
Area
Weight
Capacity
VDS
3-1/2” (2 RU)
17-3/8”w x 25-1/2”d
100 lbs.
EIA/TIA Compliant
A&E
for full
product
info.
Rackmount Storage
Fully enclosed top with inside dimensions measuring 15-7/8” wide by 14-1/2”
deep, the D and TD Series drawers feature spring-loaded latches and rugged,
straight-forward construction. Installed keylock option available. 2, 3 and 4 RU
models include drawer mat and rear cable grommet at no extra charge!
Spec. #
96-006
for full
product
info.
Racking Height
D2
TD2
3-1/2” (2 RU)
D3
TD3
5-1/4” (3 RU)
D4
TD4
7” (4 RU)
D5
TD5
8-3/4” (5 RU)
–
TD8FLK**
14” (8 RU)
*Suffix part # with “LK” for installed keylock option. **Includes
file hanging kit 8-1/2” x 11” letter size and installed keylock.
grommet in rear
TD8FLK
8 RU locking
drawer includes
letter size 8-1/2” x 11”
file hanging kit and
installed keylock
A&E
Black Anodized Part #* Black Textured Part #*
EIA/TIA Compliant
Accessories
Heavy-Duty D and TD Series Drawers
D3
UD Series Utility Drawers
The UD Series drawers offer an economical rack storage solution. Full extension
ball bearing slides extend a full 14” to reveal inside dimensions measuring 15-7/8”
wide by 14-1/2” deep. Each model comes with a face formed drawer pull.
User-installed latch and keylock are available options. Black powder coat finish.
Part #
Racking Height
Part #
Description
UD1
1-3/4” (1 RU)
LATCH
user installed latch
UD2
3-1/2” (2 RU)
KYLK
user installed keylock
UD3
5-1/4” (3 RU)
UD4
7” (4 RU)
UD3
KYLK
UD1
invert for
one RU
sliding shelf
LATCH
Lockboxes
Safely secure gear in a rackmount LBX Series lockbox. 9” depth and 17” interior
width, 3 and 4 RU models are offered with a durable black powder coat finish.
Part #
Racking Height
Depth
LBX-3
5-1/4” (3 space)
9”
LBX-4
7” (4 space)
9”
LBX-3
standard keylock
Customizable Foam Inserts
Customizable foam inserts can be modified to hold any accessory tightly in place.
Protects sensitive equipment and tools from shifting or becoming damaged when
drawers are opened and closed. Fits any Middle Atlantic Products drawer.
Part #
Description
FI-2
customizable foam insert, fits 2 space drawer
FI-3
customizable foam insert, fits 3 space drawer
FI-4
customizable foam insert, fits 4 space drawer
FI-2
foam sections removable
to fit snug against sensitive
tools and equipment
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
49
Accessories
Rack Screws and Accessories
self-guiding
pilot point
self-guiding
pilot point
HG
HM
Premium Rack Screws
Premium rack screws provide the best bit engagement in the industry. HG hardware features salt spray
resistant plating that slows rust build-up. HM hardware features an attractive black matte finish. Both types
are truss-head hardware, 10-32 threaded, 3/4” long with pre-installed washers and self-guiding pilot points.
Part #
Qty
Finish
Part #
Qty
Finish
HG
100 pc.
salt spray resistant, black gloss
HM
100 pc.
black matte
salt spray resistant, black gloss
HM500
500 pc. in reusable jar
black matte
HG500 500 pc. in reusable jar
Standard Rack Screws
Standard 3/4” long rack screws with 10-32 threads feature self-guiding pilot points. HP Series truss head
screws provide a clean, modern appearance and fit under optional trim strips, for the most attractive finish.
HW Series trim-head screws feature a classic appearance. Includes factory-installed nylon washer.
HP
Part #
HW
HP500
HP500
Head
Qty
Part #
Head
Qty
truss-head 500 pc. in reusable jar
HW500
trim-head
500 pc. in reusable jar
HP
truss-head
100 pc.
HW100
trim-head
100 pc.
HPS
truss-head
25 pc.
Security Rack Screws
HTX
HS
SPBIT
TBIT
US Patent #D517,404,D546,157
Security screws are the ideal way to keep people from tampering with rackmounted equipment. The patented
high security Guardian Series™ hardware is unique to Middle Atlantic and features a square post drive that
cannot be found elsewhere. All screws are 10-32 by 3/4” and include factory-installed black nylon washer
and black finish.
Rack Screw Part #
Qty
Bit Part #
Description
HSK
100 pc.
SPBIT
Highest Security patented square post drive
HTX
50 pc.
TBIT
star post
HS
100 pc
SBIT
square drive
SBIT
HSK
Guardian Series™
security hardware
Cable Friendly Short Rack Screws
Cable friendly HPQ Series screws are 3/8” long with 10-32 threads and
feature a rounded end to allow wires to be dressed inside front rackrail
without chafing. Featuring an attractive Phillips truss head, finished in
black. Ideal for mounting vent panels and cable management bars.
HPQ
Part #
Qty
HPQ-500
500 pc. in reusable jar
HPQ
100 pc.
Cage Nut Hardware
Cage nuts fit our cage-nut style rackrail and are available for use
with 10-32 and 6mm rack screws to accommodate slide out servers.
CN1032-50
CN6MM-100
Part #
Description
CN1032-50
50 pc. 10-32 cage nuts
CN6MM-100
100 pc. 6mm cage nuts
12-24 and 6MM Rack Screws
Primarily used in telecommunications and data, these 5/8” long 12-24 and 6mm threaded screws are
heat-treated to prevent head stripping. Finished in black, includes nylon washers.
HP-24
HP-6MM
Part #
Qty
Part #
Qty
HP-24
100 pc. 12-24 thread
HP-6MM
100 pc. 6mm Phillips head rack screws
HP24-500
500 pc. 12-24 thread in reusable jar
Rack Ruler
No time for rackspace math? Use the Rack Ruler instead. It’s a genuinely handy tape measure incremented
in both RUs (red) and inches (black) down to 1/32” scale. Measuring 1/2” wide by 96” (8 feet) long, its
Mylar-coated retracting steel tape is housed in a tough ABS case with a thumb lock and belt clip. This is a
rugged tool, not a toy – precision made by Starrett®.
DARULER
50
DARULER
labeling
Part #
Labeling on Back
Part #
Labeling on Back
RULER
audio tables, charts, and pinouts
DARULER
data tables, charts, and contact wiring
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
Technical Resources
Design Platforms
Middle Atlantic Designer™
Stencil Blocks for Visio®
Free layout and specification package for all Rack products.
Creates elevation, side, rear and plan view drawings, and
also creates Quotes and Purchase Orders. Exports to
AutoCAD® and Microsoft Visio®.
Full color, 3D console, LD desk, video wall and room
layout software package. Includes a line of sight tool.
Creates Quotes, Specifications, & also exports to AutoCAD®.
Ready to use stencils for Microsoft Visio®. Visio Blocks have
been enhanced with an on-line, updateable database of our
complete custom rackshelf offering.
Free download from middleatlantic.com,
in the ‘Tools’ menu.
Free download from middleatlantic.com,
on the Resources>>Tech Docs page.
Middle Atlantic Designer™
requires Windows XP or later
RackTools® Specification Software
Free download from racktools.com
Technical Resources
From a wealth of online resources to an award-winning customer support team, Middle Atlantic Products prides itself on the support it provides its customers to make product specification easy and convenient.
Drawings and Specifications
Revit®/BIM
(Building Information Modeling)
A&E Spec. Sheets/CSI MasterFormat
3 Part Specs. /CAD Tech Spec Drawings
Revit® family models available for
Available for most products.
enclosures & consoles.
Available at middleatlantic.com,
Available at middleatlantic.com,
on the Resources>>Tech Docs page. on the Resources>>Tech Docs page.
CAD
Blocks
3D CAD
Comprehensive library of 2D CAD blocks
available for all enclosures.
Available at middleatlantic.com,
on the Resources>>Tech Docs page.
Comprehensive library of 3D CAD models
available of enclosures & consoles.
Available at middleatlantic.com,
on the Resources>>Tech Docs page.
Online Configurators and Resources
MPR Modular Power Raceway
PDW Custom Power
Thermal Calculator
RackFinder
Design an MPR Modular Power Raceway
quickly and easily. Creates a diagram,
quote and parts list.
Available at middleatlantic.com,
in the ‘Tools’ menu.
Quickly and easily design a PDW Series
custom power raceway, including circuit
marking and custom logos.
Available at middleatlantic.com,
in the ‘Tools’ menu.
Answer a few simple questions to determine the
cooling needed to keep the system running at
the optimal temperature.
Available at middleatlantic.com, in the
‘Tools’ menu. Now available for iPhone see “MAP Toolbox” at iTunes.
Not sure which rack is needed?
This quick online tool helps
determine the best solution.
Available at middleatlantic.com,
on the main home page.
Spec Clips
UPS Runtime Calculator
Tech Support Hotline
White Papers
Save time by letting Spec Clips do the
work – simply copy and paste the results
into the specification.
Available at middleatlantic.com,
in the ‘Resources’ menu.
This calculator is the quick and easy way to
determine the appropriate backup power required.
Available at middleatlantic.com, in the ‘Tools’
menu. Now available for iPhone see “MAP Toolbox” at iTunes.
Available via phone
800-266-7225 and email
([email protected]),
providing expert advice
quickly and easily.
Practical guidance on power distribution
and grounding, thermal management,
cable management and seismic installations.
Available at middleatlantic.com,
in the ‘Resources’ menu.
Structured Cabling Products • EXCEPTIONAL SUPPORT & PROTECTION™
51
CORPORATE HEADQUARTERS
300 Fairfield Road, Fairfield, NJ 07004, U.S.A.
Corporate Voice: 800-266-7225
Fax: 800-392-3955
International Voice: +1 973 839-1011
Fax: +1 973 831-4982
Middle Atlantic Products manufactures exceptional support and protection products to mount integrated
electronic systems. All of our products are engineered to maximize system reliability and to meet the needs
of installers. From thermal considerations and built-in cable management on our racks and enclosures, to
pre-installed washers on our rack screws, we build in ways to save time and simplify the job.
Our customer-first philosophy doesn’t stop with our products. We have a fleet of regional delivery trucks
based at our New Jersey, Illinois and California facilities that deliver our products to nearby customers
and installation sites. Our demonstration vehicles tour the country displaying our products and providing
a hands-on look at the unique features and benefits. And our free electronic tools, including RackTools™
rack specification software, and Middle Atlantic Designer™ 3D layout software for technical furniture and
video walls, make it easy to design your racks and furniture layouts and quickly generate Purchase Orders
and Quotes.
MIDDLE ATLANTIC CANADA
Ottawa, Ontario (Canada Head Office)
113 Iber Road, Ottawa, Ontario K2S 1E7
Corporate voice: 888-766-9770
Fax: 888-599-5009
Middle Atlantic’s manufacturing capabilities include laser-fabrication cells which produce smooth edges
that are friendly to both cables and contractors hands and arms, automated forming lines, robots and
high-speed turret presses that provide quick throughput to allow us to ship from stock and support larger
jobs quickly. Our extensive selection of products includes steel rack enclosures, monitoring consoles,
cable management products, technical furniture, power distribution products, cooling products, and related
accessories.
Factory Distribution
USA: New Jersey
California · Illinois
middleatlantic.com
We are proud to hold both ISO 9001 registration for our quality management system in all our US facilities,
and ISO 14001 registration for our environmental management system at our New Jersey headquarters
location. Together, these rigorous, independently verified world-class registrations provide the assurance
that our customers will continue to receive high quality products and services, and that as a corporation we
are dedicated to proactively managing our environmental impact.
Canada: Ontario
British Columbia
middleatlantic.ca
The third party trademarks used in this catalog, including Decora, Revit, Velcro,
Unistrut, Technogel, Savant, Rosie, Crestron, iPod, Sony, PS3, Xbox 360, Wii,
Blu-ray, Visio and AutoCAD are registered trademarks of their respective owners.
We are pleased that our products work well with products from many fine
companies, but the use of these trademarks here is neither an endorsement
of their products nor is it their endorsement of our fine products.
SCABLECAT_2011
©2011-2012 MIDDLE ATLANTIC PRODUCTS, INC.
Commitment to the Environment
Middle Atlantic Products demonstrates a strong commitment to the environment, one which influences all
aspects of our business, not simply product design. We are proud that our New Jersey headquarters and
manufacturing facility has achieved ISO 14001 registration for our environmental management system. We
strive to use less energy and fewer natural resources to make our products because it helps lessen our
impact on the environment, but it also helps us benefit our customers with competitive prices. To further
our commitment to the environment and healthy work spaces, we have achieved GREENGUARD Indoor Air
Quality Certification for Children and Schools (the strictest level available) on the majority of our product line.
This certifies that our products meet the strictest levels of emissions of Volatile Organic Compounds. To learn
more about our environmental initiatives, contact us or see our website.
ALL RIGHTS RESERVED
NOT RESPONSIBLE FOR TYPOGRAPHICAL ERROR
100M7/11
PRINTED IN U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement