Channel Vision C-0310 TV signal amplifier Specification

spec sheet #

CVC-0402

S t r u c t u r e d W i r i n g S o l u t i o n s

C-0310 10dB Amplifier

Channel Vision’s 10dB power injected amplifier increases the strength of the incoming cable or antenna signal for longer runs to more outputs. Unlike most RF amplifiers, the C-0310 uses an external power supply that can be connected directly to the unit using a coax “F” connector. For added versatility, an optional power injector may be used to feed power back to the amplifier from a remote location, thereby eliminating the need to install the C-0310 near a power outlet.

Features:

1 in 1 out 10dB Amplifier

For remote power , use model# CVT-PI

Bi-directional power injected down the coax

5-42MHz return path for interactive TV

54-1000MHz forward path

UL and CSA approved

Dimensions: 6-3/8” (l) x 2-1/2” (h) x 1-3/4” (d)

Specifications:

Bandwidth 45-1000Mhz

Gain 10dB +/-1.5

Flatness +/-1dB

Return Loss (min) 14dB

Output Power +10dB

Dist. X-Mod. -70dB

CTB -65dB

Power Supply 12V/55mA

Rev 5/04

234 F ISCHER A VENUE • C OSTA M ESA , CA 92626

(714) 424-6500 • (800) 840-0288 • (714) 424-6510 fax www.channelvision.com • email: [email protected]

© 2004, C HANNEL V ISION ™