Sigtronics Power Supply Adapter — PG-PSA
Sigtronics Power Supply Adapter — PG-PSA
Installation Instructions
Power Supply Adapter Features
Installation
This genuine Sigtronics engineered and built adapter is
used to safely control the power to your Sigtronics systems
in vehicles with 24 volt DC or 12 volt positive ground electrical systems.
Attach the Power Supply Adapter in a convenient location
using the included hardware. Verify that the adapter unit and
cable will not interfere with the normal operation of any vehicle controls or the operation of vehicle compartment doors.
Connect the wiring harness color-for-color to the Sigtronics
intercom and vehicle power. See table below.
Sigtronics Equipment that may be used with PG-PSA
EAI Intercom
UltraSound Intercom
S.A.F.E. Communicator
MRIM-2 Mobile Radio Interface Module
Sigtronics Power Supply Adapter
Input Power: 12 to 28 Volts DC
Model: PG-PSA
Warranty: One year parts and labor.
Connector Pinout
Standard Equipment Included
Part Description
Part Number
Quantity
Pin
Wire
Color
Interface Cable
N/A
1
1
White /
Red
Power Input +
Vehicle Power +
Hex Nut, 6-32, Locking
100067
4
2
White /
Black
Power Input –
Vehicle Power –
Phillips Head Screw, 6-32 x 5/8,
Black
100105
4
3
Green
Power Output –
Sigtronics Equipment Green Wire
4
Red
Power Output +
Sigtronics Equipment Red Wire
Function
Connect To
Specialists in “SOUND” Management
178 East Arrow Highway, San Dimas, CA 91773 ( 909 ) 305-9399
1-8-2007
Made in the U.S.A.
pg_psa.pdf
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement