LT -3800 Multi-function LED Controller User Instructions Page 1 of 10
LT-3800
LED Multi-function Controller
USER INSTRUCTIONS
(Pls kindly read through instructions before use)
LT -3800 Multi-function LED Controller User Instructions Page 2 of 10
，
Forword
，
Thanks for choosing our LT-3800 Controller. Before installation and use, we strongly recommend you to read through this manual carefully. If device has been damaged during transport, please report it to your supplier immediately.
Please d on’t take any action without contacting your supplier first.
，
After-sales Service
，
From the day you purchase our products within a year, if being used properly in accordance with the instruction, and quality problems occur, we provide free repair or replacement services except the following cases:
1. Any defects caused by wrong operations..
2. Any damages caused by unauthorized removal, maintenance, modifying circuit, incorrect connections and replacing chips.
3. Any damages due to transportation, vibration etc after the purchase.
4. Any damages caused by earthquake, fire, lightning strike, pollution and abnormal voltage.
5. Any damages caused by negligence, inappropriate storing at high temperature and humidity environment or near harmful chemicals.
6. Product has been updated
，
Safety Warnings
，
1. Please don’t install this controller in lightening, intense magnetic and high-voltage fields.
2. To reduce the risk of component damage and fire caused by short circuit, make sure correct connection
3. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.
4. Check if the voltage and power adapter suit the controller & if anode or cathode definition is the same as the controller’s.
5. Don’t connect cables with power on, make sure a correct connection and no short circuit checked with instrument before power on.
6. Please don’t attempt any repairs yourself; doing so will void your manufacture’s warranty.
For update information, kindly please consult with your supplier.
LT -3800 Multi-function LED Controller User Instructions Page 3 of 10
Product Brief
LT-3800 RGB controller is a unique DIY version as well as well as a powerful combination that can control color changes of LED lights with
4-pin 3-loop cables (common anode), built-in 18 modes with touch functional buttons, provided with IR wireless remote control panel, users can control color changes of LED light by pressing the button on the controller or on the remote control panel, very users friendly.
Ⅰ
. Technical Specs
Model: LT-3800
Input/Output Voltage: DC5V-DC24V
Output Current: 6A/CH＊3CH
Output Power: 90W(5V) 220W(12V) 450W(24V)
Changing Mode: 18 modes
Grey Scale: 256 levels per RGB
Static Brightness: 16 levels per RGB
Product Size:
L142×W73×H30mm
Package Size: L145×W88×H46mm
Gross Weight:: 0.35kg
1.
2.
3.
4.
5.
6.
Automatic switch from DC5-DC24V;
With 24 Buttons IR Wireless remote control, reliable control distance can reach as far as 10m;
Several DIY Storage Buttons, to record your favorite effect ;
0-100% dimming and 16 levels of static brightness per RGB, can mix 4096 colors.
3-Channel RGB full color control, maximum outputs 6A per
Channel.
256 Grey scales per RGB, color-smooth effect is gentle and accurate.
LT -3800 Multi-function LED Controller User Instructions Page 4 of 10
7. Can choose separately change speed and brightness of each
8. mode.
Can rest at current color and color depth by selecting PAUSE function.
9.
To work together with our LT-3060, can expand unlimited power.
Ⅲ. Product Dimension
Dimension of controller
LT -3800 Multi-function LED Controller User Instructions Page 5 of 10
Dimension of IR remote
Ⅳ. Conjunction diagram
LT -3800 Multi-function LED Controller User Instructions Page 6 of 10
Ⅴ
, Operating instructions
1, Instructions of controller and remote’s Keys:
Instruction of controller’s buttons
Instruction of IR remote’s buttons
LT -3800 Multi-function LED Controller User Instructions Page 7 of 10
2, detailed key functions
Sign Button
ON /OFF
PAUSE
Description
Turn on/off the controller
Any button can start the controller at off status.
Press this button will rest at current color, press it again, will continue to change.
MODE+
MODE-
SPEED+
SPEED-
BRT+
BRT-
DIY modes
DIY modes of remote
PLAY
Press them to select next mode or back to previous mode, press MODE+ or press
MODE- over 3s to enter cycle mode.
Press them to quicken or slower speed, press SPEED+ or SPEED- over 3s, current speed is restored to Default status.
Press them to increase or decrease brightness, press any one over 3s, current brightness is restored to Default status.
Press them over 3s, LED flickers twice, then remember current change mode on this button, it can save 4 modes, just press it once then enter into pre-setup mode.
Press them over 3s, LED flickers twice, then remember the current mode on this button, it can save 8 modes, later can reach your pre-setup mode by just pressing it once.
Cycle play the 4 pre-setup modes in controller.
LT -3800 Multi-function LED Controller User Instructions Page 8 of 10
Cycle play the 8 pre-setup modes in IR remote controller.
PLAY+
RGB
Dimming
0-100% dimming per RGB, 16 levels of brightness per RGB, you can get kinds of color effects. R16 × B16 × G16＝4096, you can mix 4096 static colors.
Ⅵ
. Tables of changing modes
Sequence Modes Description
1 Static red Normally on red
2
3
4
5
6
7
Static green Normally on green
Static blue
Static cyan
Normally on blue
Static yellow Normally on yellow
Static purple Normally on purple
Normally on cyan
Static white Normally on white
8 3-color Red, green and blue skipping 3-color skipping
9 7-color skipping
Red, green, blue, yellow, purple, cyan, white 7-color shipping
Remark
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness and speed adjustable
Brightness and speed adjustable
LT -3800 Multi-function LED Controller User Instructions Page 9 of 10
Brightness and strobe green and blue on） speed adjustable
11 3-color smooth strobe
RGB 3-color gradual changes smooth smooth changes gradual changes
Brightness and speed adjustable
Brightness and speed adjustable
Brightness and speed adjustable smooth smooth gradual changes gradual changes
Brightness and speed adjustable
Brightness and speed adjustable
Brightness and speed adjustable
17 change bright & fade
Great cycle All changing modes overlap cycle
/ dimming RGB
16 levels of brightness per RGB
Ⅷ
. Exception Handle s
Malfunction
No light
Incorrect color
No changes for certain mode
Causation Settle
1. No power from plug
2. Power supply
1、 Check the socket
2、 Check the malfunction, protection works re-power on
3. Incorrect connection
3、 Check connection or cable loose
4. Incorrect RGB output wire connection
4、 Re-connect RGB wires correspondently
5. Speed is too slow
5、 Press Speed to accelerate
LT -3800 Multi-function LED Controller User Instructions Page 10 of 10
6. Output cable is too
Uneven long
7. Wire diameter is too small
6、 Reduce cable or use daisy-chain power brightness of
LED between front and rear power capability
7、 Change wider wire
8、 Change power supply
9、 Add power amplifier controller capability
Kind remind：
The effective power of the power supply in market is 80% of what it is written, so customers should choose a higher power supply than the actual LED load, at least 20% higher.
