Paxton Switch2 access control system Application Note

Below you will find brief information for access control system Switch2. This application note provides installation instructions and information about the Switch2 system. It is a standalone system that uses a separate control unit from the user interface. The control unit is mounted on the secure side of the door, providing high security. The Switch2 is ideal for sites that require simple access control and where recording of events is not required. It can be configured to use the same site code so that all doors operate from a single set of user tokens.

PDF Download
Document
Paxton Switch2 Application Note | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Standalone operation
  • Secure control unit mounting
  • Simple access control
  • Single site code configuration
  • Compatible with Paxton readers and keypads

Frequently asked questions

A Switch2 system is a standalone access control system that uses a separate control unit from the user interface. The control unit can be mounted on the secure side of the door, providing high security.

The Switch2 system is extremely simple to install and configure. It is ideal for sites that require simple access control and where recording of events is not required. The control unit can be fitted with a door contact to monitor the position of the door in case it is forced, and an alarm output is provided to give an audible warning.

The lock output on the Switch2 is a changeover relay enabling simple connection of either fail open or fail closed electric locks.
Preparing document for printing…
0%