valve actuators 132 - Orange Coast Pneumatics

valve actuators 132 - Orange Coast Pneumatics
ua
ir
e
VALVE ACTUATORS
The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
One of the most versatile items in the Clippard line. Permits wide circuit flexibility and allows many control functions to be
accomplished pneumatically with less cost, hazards and complexity. Threads onto the tops of our Miniature 2-way, 3-way, and 4-way
valves and ES-1 electric switch to provide fast pilot actuation from a pneumatic signal.
11916-1
11916-3
MAV-2
MAV-3
MAV-4
MJV-4
FV Series
PC-1B
Manual Push Buttons
Vacuum Actuator
PS-P2E-Y
PS-L2M-R
MVA-10, MVA-10P
MPA Actuators Can:
• Remotely actuate any number of
valves and switches simultaneously
in different strategic locations from a
single miniature 3-way valve
PC-5F-GN
Rolle
PC-3E-BL
r Act
uato
• Make an ES-1 into a pressure switch
rs
PC-4M-WH
Push Buttons
• Act as an air relay, i.e., one pressure
source to another.
MBA-1
12296
• Operate the MAV-4D from a single
impulse.
11925
Air Actuators
pn
e
• Serve as a pressure interlock or
safety device, i.e., turn off power
when pressure fails, etc.
• Provide an electric take off from
a pneumatic source to start and
stop power, actuate electric
counters, indicator lights on
panel boards, etc.
MPA-10
MPA-10P
MPA-5
MPA-5P
MPA-3
MPA-3P
Fo
ot
Pe
da
lA
ctu
ato
MPA-7
r
MJV-2
MJV-3
FPA-1
ES-1
Manual Push Buttons
11916-4
132
11916-2
PC-2R
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
FPA-1
ua
ir
e
VALVE ACTUATORS
Adjustable travel needle type foot pedal
8
4
.250
3
3.500
“Hands-free” touch-of-toe operation of endless
types of automated and semi-automated machinery
and equipment, jigs and fixtures, is possible thru use of
this sturdy treadle type foot pedal, combined with
Clippard miniature valves, plunger type air pressure
controls, and electrical switch.
A sliding link mechanism between treadle and
mounting sleeve actuates the component, and a set
screw at the back of pedal base adjusts treadle travel.
Pedal is spring loaded at approximately 1/2 lb. for
return to “off” position.
4.375
30˚
.375
.062
15/32-32 thd. for valve mounting
Note for MBA-1, 11925 & 12296:
Valve mtg. thd.
.250 thd length
.373 thd length
When mounting on a valve, a space should be provided
between the body and the actuator according to the chart
to the right:
MBA-1
Construction: Sturdy cast aluminum and black
oxided steel
Control Devices: May be fitted with any Clippard
2, 3 or 4-way valve or MAR-1C pressure
controller with a 15/32-32 mounting thread
Mounting: To floor or other structure with two
9/32” mounting holes stroke plunger adjustable
to accommodate a variety of valves
MBA-1
.125”
.218”
11925
.062”
.188”
Ball cam actuator permits the valves and electrical
switch to be operated by mechanical movement
depressing the ball from any direction
Construction: Body - brass
Ball - stainless steel
retained in housing
Operation: Will actuate valve while depressed
from any (360˚) direction
15/32-32 thd.
.562 hex.
Mounting: 15/32-32 female to mount to
Clippard miniature valves and electric switch
.187
pn
e
.750
Roller cam follower actuator
Construction: Stainless steel with nylon roller
Temperature Range: 32˚ to 230˚ F
.484 dia.
Mounting: 31/64” dia. mounting hole fits
15/32-32 threaded mounting section of
valve bodies
.375
.687 dia.
.500
.187
1
Operation: Mounts to valve body, actuates
valve when mechanically depressed; valve
spring provides return
.500
dia.
.500
.312
12296
A mounting nut (supplied with
valve), mounting bracket or
washers should be used to
obtain the required spacing.
Temperature Range: 32˚ to 230˚ F
vent
11925
12296
.062”
.188”
.375
Roller, double-pivoted one way cam follower actuator Construction: Stainless steel with nylon roller
Temperature Range: 32˚ to 230˚ F
.484 dia.
Mounting: 31/64” dia. mounting hole fits
15/32-32 threaded mounting section of
valve bodies
.375
.500
dia.
.500
.500
.312
.187
Operation: Mounts to valve body, actuates
valve when depressed by activating cam or
linear travel device in one direction only;
no actuation on return travel
.812
.375
1
.218
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
.687 dia.
133
ua
ir
e
AIR PILOTED VALVE ACTUATORS
MINIMUM PRESSURE REQUIRED (PSIG)**
Clippard
Valve
Vacuum
(in Hg)
Pressure (psig)
w/MPA3
ES-1 Switch
12
MAV-2 Valve
23
MAV-3 Valve
23
MAV-4 Valve
36
MJV-4 Valve
36
MAV-4D Valve
13
MJV-4D Valve
13
MJV-2 Valve
30
MJV-3 Valve
30
MAVO-2 Valve
27
MAVO-3 Valve
27
MJVO-2 Valve
30
MJVO-3 Valve
30
w/MPA-5
Clippard
Valve
Vacuum
(in Hg)
Pressure (psig)
w/MPA3 w/MPA-5 w/MPA-7 w/MPA-10 w/MVA-10
w/MPA-7 w/MPA-10 w/MVA-10
4
2
*
*
FV-3
41
15
7.5
4.0
8.2
8
4
2.0
4.2
FV-3P
41
15
7.5
4.0
8.2
8
4
2.0
4.2
FV-4
41
15
7.5
4.0
8.2
11
5.5
3.5
7.2
FV-4P
41
15
7.5
4.0
8.2
11
5.5
3.5
7.2
FV-5
41
15
7.5
4.0
8.2
4
1.5
1.0
2.0
4
1.5
1.0
2.0
FV-5P
41
15
7.5
4.0
8.2
10
5
3.0
6.2
FV-3D
14
5
2.5
1.5
3.2
10
5
3.0
6.2
FV-3DP
14
5
2.5
1.5
3.2
9
4.5
2.5
5.2
FV-4D
14
5
2.5
1.5
3.2
9
4.5
2.5
5.2
FV-4DP
14
5
2.5
1.5
3.2
10
5
3.0
6.2
FV-5D
14
5
2.5
1.5
3.2
10
5
3.0
6.2
FV-5DP
14
5
2.5
1.5
3.2
**with 100 psi to valve inlet; *consult factory
Single acting spring return miniature air pilot
actuator
pn
e
MPA-3
#10-32 thd.
15/32-32 thd.
vent
1
Ports: 10-32
Temperature Range: 32˚ to 230˚ F
Single acting spring return miniature air pilot
actuator
1/8 NPT
15/32-32 thd.
Input Pressure: 250 psig max.
Bore Size: .375
Construction: Body - brass
Springs - stainless steel
Seals - Buna-N rubber
Piston - Delrin®
Force Factor: .1
.500
flats
.125
Construction: Body - brass
Springs - stainless steel
Seals - Buna-N rubber
Piston - Delrin®
Mounting: 15/32-32 female thread to
mount to Clippard miniature valves
and components
.125
.625
dia.
Bore Size: .375
Force Factor: .1
.562 .437
dia. flats
MPA-3P
Input Pressure: 250 psig max.
vent
1.218
Mounting: 15/32-32 female thread to
mount to Clippard miniature valves
and components
Ports: 1/8 NPT
Temperature Range: 32˚ to 230˚ F
134
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
MPA-5
ua
ir
e
AIR PILOTED VALVE ACTUATORS
Single acting spring return miniature air pilot
actuator
3/4 hex.
Input Pressure: 250 psig max.
Bore Size: .625
Construction: Body - brass
Springs - stainless steel
Seals - Buna N rubber
Piston - Delrin®
1.312
vent
Force Factor: .3
Mounting: 15/32-32 female thread to
mount to Clippard miniature valves
and components
#10-32 thd.
Ports: 10-32
15/32-32 thd.
Temperature Range: 32˚ to 230˚ F
MPA-5P
Single acting spring return miniature air pilot
actuator
3/4 hex.
Input Pressure: 250 psig max.
Bore Size: .625
Construction: Body - brass
Springs - stainless steel
Seals - Buna N rubber
Piston - Delrin®
1.312
Force Factor: .3
vent
Mounting: 15/32-32 female thread to
mount to Clippard miniature valves
and components
1/8 NPT
Ports: 1/8 NPT
15/32-32 thd.
Temperature Range: 32˚ to 230˚ F
Single acting spring return miniature air pilot
actuator
pn
e
MPA-7
Input Pressure: 250 psig max.
Bore Size: .825” dia.
15/32-32 thd.
1 dia.
1.625
Force Factor: .6
1/8-27
NPT
.875 flats
Construction: Body - aluminum and brass
Springs - stainless steel
Seals - Buna N rubber
Piston - Delrin®
vent
.218
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
Mounting: 15/32-32 female thread to
mount to Clippard miniature valves
and components
Ports: 1/8-27 NPT
Temperature Range: 32˚ to 230˚ F
135
MPA-10
ua
ir
e
VALVE ACTUATORS
Bore Size: 1.250” dia.
Single acting spring return pilot actuator
Input Pressure: 150 psig maximum
.750
flats
Inlet Port: #10-32 female thread
.187
Vent
15/32-32 Thd.
Mounting
.625
dia.
1.500
dia.
Mounting: 15/32-32 female thread to mount
to Clippard Minimatic ® valves and
components; no spacers or washers
are required when assembled to any
Clippard valve; may be used with
15018-2 mounting bracket
Force Factor: 1.2
Temperature Range: 32˚ to 230˚ F
MPA-10P
.187
.875 dia.
MVA-10
1.656
Single acting spring return vacuum actuator
Input Pressure: 30 in. Hg vacuum
Inlet Port: #10-32 female thread
.187
.750
flats
#10-32 Thd. or
1/8 NPT*
1.500
dia.
MVA-10P
* Inlet Port: 1/8 NPT female thread
.468
#10-32 Thd. or
1/8 NPT*
.625
dia.
.875
dia.
vent
Mounting: 15/32-32 female thread to mount
to Clippard Minimatic ® valves and
components; no spacers or washers
15/32-32 Thd.
Mounting
are required when assembled to any
Clippard valve; may be used with
15018-2 mounting bracket
.187
Temperature Range: 32˚ to 230˚ F
* Inlet Port: 1/8 NPT female thread
.468
1.656
Round solid brass 5/8” dia. push button
pn
e
11916-1 1/8 STEM
11916-2 3/16 STEM
.250
.125 or .187 dia.
- .187 deep
.156
Mounting: 1/8” or 3/16” dia. mounting hole
fits valve stems; locks in place by set screw
(Allen wrench furnished)
.406
dia.
11916-3 1/8 STEM
11916-4 3/16 STEM
Temperature Range: 32˚ to 230˚ F
Note: Individually packaged or bulk
quantities available
.625 dia.
Round solid brass 13/32” dia. push button
.125 or .187 dia.
- .187 deep
.250
Use: Mounts directly on valve stem for
manual operation of valve; prevents
overtravel of valve stem by providing
a positive stop
Use: Mounts directly on valve stem for
manual operation of valve; small size
permits attachment to valve before valve
is mounted through 15/32” dia. hole;
prevents overtravel of valve stem by
providing a positive stop
Mounting: 1/8” or 3/16” dia. mounting hole
fits valve stems; locks in place by set screw
(Allen wrench furnished)
.406 dia.
Temperature Range: 32˚ to 230˚ F
Note: Individually packaged or bulk
quantities available
136
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
ua
ir
e
PUSH BUTTON ACTUATORS
Captivated Push Buttons
P C - ❑
Pushbutton
Captivated
pn
e
Clippard also offers the captivated
push button for use with a large
variety of stem operated valves.
Captivated push buttons are sold as
kits, adaptable to either 1/8” diameter
stems or 3/16” diameter stems. Each
kit includes a colored acetyl push
button, brass housing nut, 1/16” brass
spacer, and lock washer for assembly. The
standard furnished mounting nut has a bright
chromate finish. Black chrome or nickel-plated finishes are
also available by adding the suffix -BC or -NP to the part
number.
Captivated push buttons can be used on individual stem
operated valves or in panel mount application by omitting
the 1/16” brass spacer. These push buttons are available in a
variety of colors, allowing you to color code, or easily
differentiate between valves when
designing control systems.
The design of these push
buttons allows maximum
actuation of the valve with
no overtravel or side load
to the valve stem. This assures
superior performance and long life.
Captivated push buttons are commonly used as limit
valves in conjunction with pneumatic cylinders, slides, and
any variety of mechanical actuators. The rugged design
coupled with precise actuation of stem operated valves
make it perfect for applications where repetitive cycling of
the valve is necessary. Designed to work with Clippard MAV,
MJV, and FV series, these push buttons integrate easily into
Minimatic ® systems, providing optimal quality and
efficiency in miniature pneumatic control.
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
❑
(- ❑)
Push Button color
Valve Stem dia.
-1 1/8 dia.
-2 3/16 dia.
B - Black
G - Green
R - Red
W - White
Y - Yellow
Options
BC - Black chrome
NP - Nickel plated
.531 dia.
.375 dia.
.218
captivated nut
.437
.562 hex.
"A"
panel, mounting bracket,
or 1/16 spacer and lock
washer (provided)
Spacing Required for Proper
Actuation of Push Button
Valve
“A” Dim.
MAV-2, MAV-3
MAVO-2, MAV0-3
3/32”
MAV-4, MAV-4D
MJV-4, MJV-4D
5/32”
MJV-2, MJV-3
MJVO-2, MJVO-3
FV-3, FV-4, FV-5
7/32”
137
ua
ir
e
PUSH BUTTON ACTUATORS
Heavy Duty Push Button Actuators
Heavy Duty Push Button Actuators can be used on individual stem
operated valves or in panel mounting applications. These push buttons
are available in a variety of colors, allowing you to color code, or
easily differentiate between valves when designing control systems.
They feature a built-in spring so the button always returns to the
extended position when released with no additional load on the
valve.
The design of these push buttons allows complete actuation of the
valve with no overtravel or side load to the valve assuring superior
performance and long life.
P C - ❑
❑
- ❑
❑
Pushbutton Captivated
Size Mounting Thread
E - Extended
F - Flush
M - Mushroom
pn
e
3 - 5/8-32 thd. (16mm)
4 -7/8-32 thd. (22mm)
5 -1 3/16-28 thd. (30mm)
Button Style
Push Button color
BK - Black WH - White
GN - Green
YL - Yellow
OR - Orange BR - Brown
Note: Non-standard colors available; consult factory
PC-3E-❑❑
PC-4E-❑❑
PC-5E-❑❑
PC-3F-❑❑
PC-4F-❑❑
PC-5F-❑❑
PC-3M-❑❑
PC-4M-❑❑
PC-5M-❑❑
138
RD - Red
BL - Blue
GR - Grey
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
Features
ua
ir
e
PUSH BUTTON ACTUATORS
DIMENSIONS
• Assembles directly to the valve; no adapters
required
SIZE
• Ideal for mounting on panels or brackets, up to
1/4” thick panel
5/8-32
• Self-contained assembly; no loose parts
• Stainless steel spring returns button to extended
position with no added load to the valve stem
• Three sizes: 16 mm (5/8 dia.), 22 mm (7/8 dia.)
and 30 mm (1-3/16 dia.)
• Flush, extended and mushroom style buttons
• Caution: Pushbuttons are easily depressed.
Maintain positive outlook when in use.
(16 mm)
mtg. thd.
7/8-32
(22 mm)
mtg. thd.
1 3/16-32
(30 mm)
mtg. thd.
“H”
“T”
“P”
Dia.
Hgt.
Thd.
Panel Hole
Hex Flats
PC-3E-❑❑
.625”
PC-3F-❑❑
.625”
PC-3M-❑❑ 1.165”
.734”
.500”
.906”
5/8-32
5/8”dia.
3/4”
PC-4E-❑❑
.925”
PC-4F-❑❑
.925”
PC-4M-❑❑ 1.500”
.734”
.500”
.906”
7/8-32
7/8”dia.
1-1/16”
PC-5E-❑❑ 1.165”
PC-5F-❑❑ 1.165”
PC-5M-❑❑ 1.500
.734”
.500” 1 3/16-32 1-3/16 dia. 1-5/16”
.906”
"D"
• Five bright colors for visibility and operator
recognition. Other colors available upon request
“F”
colored delrin
pushbutton
housing
• Nickel plated brass housing and nut, molded
Delrin® button and stainless steel spring for
long life and corrosion resistance
"F" hex. flats
"H"
• Protects the valve from overtravel and side load
"T" thread
.250 max.
panel or bracket
pn
e
Different valve models vary in mounting
thread length, stem extension and stroke. To
accommodate these differences, the chart
below lists the recommended spacing (“S”) to
insure complete valve actuation. Provided
with each button is a 1/16” thick spacer ring
that may be used in place of a panel or bracket
to obtain proper spacing. The lockwasher
provided may be used with no significant
effect on spacing.
+1/32
-0
“D”
MODEL
nut "F" hex. flats
"S" spacing
see chart
spring
exhaust vent
brass valve
(MJV-3 shown)
"P" panel
hole size
SPACING “S” REQUIRED FOR PROPER VALVE ACTUATION
Valve series
MAV-2 MAVO-2 MAV-4 MAV-4D
MAV-3 MAVO-3 MJV-4 MJV-4D
MJV-2,-3
MJVO-2,-3
FV-3, FV-4, FV-5
• Mounting thd.
• Stem extension
• Valve stroke
1/4”
5/16”
1/8”
1/4”
3/8”
3/16”
3/8”
5/16”
1/8”
“S” Minimum
Maximum
none
1/16”
none
1/16”
1/16”
1/8”
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
139
ua
ir
e
PUSH BUTTON ACTUATORS
Minimatic® Actuators
"A"
Easily actuated, clearly identifiable panel controls are the
hallmark of a professional control system.
push button
or twist
Whether the system is a single valve machine control…or
an operating console for controlling complex pneumatic
systems…you will find the actuator you require.
"B"
mounting
panel
The line includes round push buttons, in flush, extended,
and mushroom styles. Also included are key locking
controls, and twist actuators. An electric switch is also
available where a combination of electric and pneumatic
switching is desired in a single panel.
.670
nut
fits into
.875 dia. hole
.846
Dimensions
PB-85
Size 22
Size 30
space or
thickness
“A”
“B”
Model
“A”
“B”
PS-P2F
PS-P2E
PS-P2M
PS-L3M
PS-P4K
PS-L4M
PS-T2T
PS-T3T
PS-T3K
1.156
1.156
1.575
1.575
1.156
1.575
1.156
1.156
1.156
.492
.736
.965
.965
2.320
2.320
1.043
1.043
2.320
PL-P2F
PL-P2E
PL-P2M
PL-L3M
PL-P4K
PL-L4M
PL-T2T
PL-T3T
PL-T3K
1.440
1.440
1.575
1.575
1.440
1.575
1.440
1.440
1.440
.550
.960
1.043
1.043
2.280
2.280
1.403
1.043
2.280
brass valve
dependent upon
valve used
Manual Actuator Features
• Attractive and rugged: precision molded ABS plastic
pn
e
Model
• Two sizes: 30 mm (1 13/64” dia.) in 20 models
22 mm (7/8” dia.) in 20 models
Actuator Mounting Chart
The following chart gives the necessary spacing required
between the shoulder of the valve and the base of the adaptor.
• 4 bright colors for visibility and operator recognition
• Flush, extended, and mushroom styles
• Custom adaptor mates manual actuator with 26 different
Clippard 2, 3, and 4 way valves. Valve and adaptor slide
on and lock onto actuator in seconds. Easily removed.
Valves
PB-85
MAV-2, -2P, -2R, -3R, -3, -3P
MAVO-2, -3
None
• Special wrench fits both sizes, speeds assembly
MJV-2, -3
MJVO-2, -3
1/8”
• Actuators may be mounted or dismounted in panel
independent of valve and adaptor
MAV-4, -4D
MJV-4, -4D
None
• 19 legend plates available plus blank plates in each size
ES-1
None
• Valve and adaptor may be locked onto actuator in any
of four positions to ease installation inside panel
FV-3, -3P, -3D, -3DP
FV-4, -4P, -4D, -4DP
FV-5, -5P, -5D, -5DP
1/8”
• Anti-rotation rings available for secure mounting
140
• Key lockable push buttons for security and/or safety
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
Legend Text
Blank
Start
Stop (red)
Forward
Reverse
Fast
Slow
On
Off (red)
Reset
Raise
Lower
Emergency Stop (red)
Run / Jog
Auto / Hand
Forward / Reverse
Fast / Slow
Open / Close
Up / Down
Off / On
ua
ir
e
PUSH BUTTON ACTUATORS
22 Size Part #
33 Size Part #
PS-01
PL-01
PS-02
PL-02
PS-03
PL-03
PS-04
PL-04
PS-05
PL-05
PS-06
PL-06
PS-07
PL-07
PS-08
PL-08
PS-09
PL-09
PS-10
PL-10
PS-11
PL-11
PS-12
PL-12
PS-13
PL-13
PS-31
PL-31
PS-32
PL-32
PS-33
PL-33
PS-34
PL-34
PS-35
PL-35
PS-36
PL-36
PS-37
PL-37
Legend Plates*
Plastic legend plate, two sizes, with a black field and white inscription
(red as noted). Inscription plates are interchangeable in both sizes.
Accessories for Manual Actuators
Mounting Wrench
Fits both 22 Size and 30 Size manual actuators.
PB-60
Valve Adaptor
Adapts all manual actuators to any Clippard
standard 2-, 3-, or 4-way brass valve. Made of
ZYTEL® ST-901 Supertough Nylon.
PB-85
pn
e
Mounting Clippard Manual Actuators
These drill plans are for units fitted with optional
anti-rotation ring
1.300
.875 dia.
Square Bezel
Converts any 22 Size actuator to a square
actuator.
.125 dia.
.437
1.800
ZYTEL® is a registered trademark of DuPont
PS-65
.875 dia.
Size 22 - Typical drill plan
Replacement Mounting Nut
Mounting nut that holds manual actuators to
panel. Included with manual actuators. 22 Size
only.
1.580
.125 dia.
PS-55
.600
Anti-Rotation Ring
1.970
1.200 dia.
1.200 dia.
Size 30 - Typical drill plan
Holds push button in one position. Included with
all twist manual actuators.
PS-50 (22 Size)
PL-50 (30 Size)
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
141
ua
ir
e
PUSH BUTTON ACTUATORS
MANUAL ACTUATORS
P
Push Button
❑ - ❑
Size
S - Small (22 mm)
L - Large (30 mm)
Size 22
Flush Push Button
❑
❑ - ❑
“Off”
Actuation
“On”
4 - Key
Actuation
3 - Twist
P - Push
2 - Spring
T - Twist
K - Key
L - Latching (Push)
R - Rotate (Push)
W - Wiggle
Extended Push Button
PS-P2F-R
PS-P2F-G
PS-P2F-B
PS-P2F-Y
PS-P2E-R
PS-P2E-G
PS-P2E-B
PS-P2E-Y
Button Type
F - Flush
E - Extended
M - Mushroom
T - Twist
K - Key
Color
R - Red
G - Green
B - Black
Y - Yellow
Manual Push Mushroom
PS-P2M-R
PS-P2M-G
PS-P2M-B
Manual push “In”. Spring return.
Manual push “In”. Spring return.
Automatic Push/Turn Mushroom
Push Key Push Button
Push Key Mushroom
pn
e
Manual push “In”. Spring return.
PS-L3M-R
PS-L3M-G
PS-L3M-B
PS-P4K-B
PS-L4M-R
Manual push “In” Latches “In”. Turn clockwise
to unlatch. Spring return.
Manual push “In”. Spring return. Turn key
counter-clockwise to lock “Out”; clockwise
to unlock. Key withdrawable locked or
unlocked. Black only.
Manual push “In”. Automatic latches “In”. Turn
key clock-wise to release. Spring return. Key
withdrawable “Out” position only. Red only.
Spring Return Twist 45°
Maintained Twist 90°
Key Twist 90° Maintained
PS-T2T-B
Turn clockwise and hold for “In”. Release for
spring return. Black only.
142
PS-T3T-B
Turn clockwise to latch “In”. Turn counterclockwise to release. Black only.
PS-T3K-B
PS-K3K-B
(PS-K3K-B) Same
as PS-T3K-B except
key is withdrawable
in “Out” position
only.
(PS-T3K-B) Turn key clockwise to latch “In”.
Turn key counterclockwise to release. Key
with-drawable in both positions. Black only.
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
Size 30
Flush Push Button
ua
ir
e
PUSH BUTTON ACTUATORS
Extended Push Button
PL-P2E-R
PL-P2E-G
PL-P2E-B
PL-P2E-Y
PL-P2F-R
PL-P2F-G
PL-P2F-B
PL-P2F-Y
Manual push “In”. Spring return.
Manual push “In”. Spring return.
Key Twist 90° Maintained
PL-T3K-B
PL-K3K-B
(PL-K3K-B) Same
as PL-T3K-B except
key is withdrawable
in “Out” position
only.
(PL-T3K-B) Turn key clockwise to latch “In”.
Turn key counterclockwise to release. Key
with-drawable in both positions. Black only.
Push Key Push Button
pn
e
Automatic Push/Turn Mushroom
PL-L3M-R
PL-L3M-G
PL-L3M-B
PL-P4K-B
Push Key Mushroom
PL-L4M-R
Manual push “In”. Latches “In”. Turn clockwise to unlatch. Spring return.
Manual push “In”. Spring return. Turn key
counter-clockwise to lock “Out”; clockwise
to unlock. Key withdrawable locked or
unlocked. Black only.
Manual push “In”. Automatic latches “In”.
Turn key clock-wise to release. Spring return.
Key withdrawable “Out” position only. Red
only.
Spring Return Twist 45°
Maintained Twist 90°
Manual Push Mushroom
PL-T2T-B
Turn clockwise and hold for “In”. Release for
spring return. Black only.
PL-T3T-B
Turn clockwise to latch “In”. Turn counterclockwise to release. Black only.
Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com
PL-P2M-R
PL-P2M-G
PL-P2M-B
Manual push “In”. Spring return.
143
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement