light is nothing without control

light is nothing without control
New Products for 2016
light is nothing without control
5
Lighting, air-conditioning, shading etc. - intelligent buildings demand modern control solutions.
The basis for this are sensors that intuitively and reliably recognise requirements, significantly
increasing convenience and energy efficiency - and the better the sensors work as the "sensory
organs" of a building, the more successful lighting and building management will be. As the inventor
of sensor-switched lights, we at STEINEL continuously work on making our products even better
as an active contribution to shaping the future of building automation with pioneering ideas
and innovations. Four sensor technologies, our new LiveLink light management system and our
pioneering innovations in sensors, sensor-switched lights and floodlights substantiate this
claim impressively.
STEINEL has been synonymous with uncompromising brand quality since 1959.
We are impressed by our products and want to impress you as well.
Not least with our five-year warranty on all STEINEL PROFESSIONAL products.
2
3
Contents
Sensor-switched
floodlights
Interconnection
systems
Presence switches
Presence detectors
Multi-sensor
technology
Motion detectors
Light sensors
Sensor-switched lights
from page 8
from page 16
from page 34
from page 46
from page 50
from page 72
XLED PRO Wide
XLED PRO Wide XL
XLED PRO Square
XLED PRO Square XL
Smart Remote
LiveLink
eNet
KNX
IR 180 UNIVERSAL
IR 180
HF 180
IR Quattro SLIM XS
HPD 2
3000 series
Light Sensor Dual
NM 5000-3
RS PRO LED R1
4
5
Precision and imagination are
the key to innovation and quality.
6
7
Sensor-switched floodlights
Swivelling through 360°,
the LED panel can be
adjusted for any chosen
lighting situation.
Sensor-switched floodlights
as you have never seen them before.
XLED PRO Wide and XLED PRO Square
In 2008 we launched the XLED 10 and 25 as the first manufacturer to put a sensorswitched-LED floodlight on the market and set the standard. During the conceptual
design phase of the next generation, two aspects were of key importance to us: the full
adjustability of the floodlight head and a light pattern aligned to the application. This resulted
in the completely new concept of XLED PRO Wide and Square being created: Wide for the
illumination of rectangular areas along the side of buildings and Square for the illumination
of large areas. We achieve the evenness of light using a precisely calculated LED lens matrix.
The sophisticated mechanism permits adjustment in all directions, catering to any specific
lighting situation. To top it all, we have optimised the sensor and, by the way, the price as well.
Precisely calculated light system for the
homogenous illumination of surfaces.
Rectangular: XLED PRO Wide
Square: XLED PRO Square
Intricately calculated
lens optics for maximum
light efficiency.
Rectangular illumination:
XLED PRO Wide
8
Square illumination:
XLED PRO Square
9
Sensor-switched floodlights
High-quality
aluminium
heat sink.
Full light power. Extra wide.
XLED PRO Wide
The new XLED PRO Wide floodlight. Lighting precision in wide format. Developed by
STEINEL, the lens matrix and the fully swivelling and tilting flat design light head provides perfect
illumination over particularly large areas or along buildings. The powerful high-end LEDs create
an impressive brightness of 2400 lumens while consuming just 24.8 watts. The integrated
basic light LEDs provide orientation and safety with minimal energy consumption. The sensor
has an angle of coverage of 240° and a reach of 12 metres. The slave version offered separately
can simply be interconnected by cable. The XLED PRO Wide eNet version can also be integrated
into the new eNet system by wireless link.
If it has to be even brighter, night can be turned into day with the XLED PRO Wide XL version.
Delivering 4400 lumens from just 48 watts, this spot light really ought to be called a floodlight.
New LED lens
matrix for perfect
illumination.
LED 24,8w 48w
30 years
(Ø4,5 h /day)
2400 lm
97 lm / W
4400 lm
92 lm / W
soft light
start
basic
brightness
240°
max. 12 m
2 - 1000 Lux
5 sec - 15 min
5JAHRE
3%
360°
4000 K
neutral white
Optimised sensor
for mounting heights
of up to 6 m.
GARANTIE
manual
override
functional
warranty
linear basic
light.
white
black
Technical specifications
Dimensions: (H x W x D): 188 x 265 x 126 mm*
Dimensions: (H x W x D): 165 x 265 x 126 mm
Power supply: 220 - 240 V, 50 / 60 Hz
Output: 24.8 W / 48 W (XL)
Brightness: 2400 lumens / 4400 lumens (XL)
Efficiency: 97 lm/W / 92 lm/W (XL)
Colour temperature: 4000 K / SDCM 3
Colour rendering: Ra ≥ 80
LED life expectancy: 50,000 h (L70B10 to LM80)
LED cooling system: passive Thermo Control
Sensor technology: passive infrared*
Angle of coverage: 240°*
Reach: max. 12 m*
10
Also available as a slave
version without sensor.
Twilight setting: 2 - 1000 lux*
Time setting: 5 sec - 15 min*
Basic light level: 3%, optionally for 10 min,
30 min or all night long
Soft light start: Yes
Manual override: 4 hours, selectable
Sensor/slave interconnection: max. of 10 floodlights
IP rating / protection class: IP 54 / I
Material: UV-resistant plastic (base), aluminium
(heat sink)
Temperature range: -20°C to +40°C
Accessories: remote control RC9, Smart Remote
XLED PRO Wide
EAN white 4007841 010072
EAN black 4007841 010096
EAN slave white 4007841 010232
EAN slave black 4007841 010256
XLED PRO Wide XL
EAN white 4007841 010041
EAN black 4007841 010065
EAN slave white 4007841 010201
EAN slave black 4007841 010225
*Sensor version
11
Sensor-switched floodlights
High-quality
aluminium
heat sink.
Square-shaped light. Extremely bright.
XLED PRO Square
The XLED PRO Square. Even illumination of large areas. THE XLED PRO Square is also
equipped with the lens matrix developed by STEINEL and the fully swivelling and tilting flat design
light head. It was specially developed to illuminate large areas homogeneously. The powerful
high-end LEDs create an impressive brightness of 2400 lumens while consuming just 24.8 watts.
The basic light LEDs provide orientation and safety with minimal energy consumption. The sensor
has an angle of coverage of 240° and a reach of 12 metres. The slave version offered separately
can simply be interconnected by cable. The XLED PRO Square eNet version can also be integrated into the new eNet system by wireless link.
New LED lens
matrix for perfect
illumination.
If this is not enough, its big brother - the XLED PRO Square XL - provides almost twice as much
light output. With 4400 lumens at a consumption of just 48 watts, now the sun also shines at night.
LED 24,8w 48w
30 years
(Ø4,5 h /day)
2400 lm
97 lm / W
4400 lm
92 lm / W
soft light
start
basic
brightness
240°
max. 12 m
2 - 1000 Lux
Optimised sensor for
mounting heights
of up to 6 m.
5 sec - 15 min
5JAHRE
3%
360°
4000 K
neutral white
GARANTIE
manual
override
functional
warranty
linear
basic light.
white
black
Technical specifications
Dimensions (H x W x D): 230 x 178 x 130 mm*
Dimensions: (H x W x D): 208 x 178 x 130 mm
Power supply: 220 - 240 V, 50 / 60 Hz
Output: 24.8 W / 48 W (XL)
Brightness: 2400 lumens / 4400 lumens (XL)
Efficiency: 97 lm/W / 92 lm/W (XL)
Colour temperature: 4000 K / SDCM 3
Colour rendering: Ra ≥ 80
LED life expectancy: 50,000 h (L70B10 to LM80)
LED cooling system: passive Thermo Control
Sensor technology: passive infrared*
Angle of coverage: 240°*
Reach: max. 12 m*
12
Also available as a slave
version without sensor.
Twilight setting: 2 - 1000 lux*
Time setting: 5 sec - 15 min*
Basic light level: 3%, optionally for 10 min,
30 min or all night long
Soft light start: Yes
Manual override: 4 hours, selectable
Sensor/slave interconnection: max. of 10 floodlights
IP rating / protection class: IP 54 / I
Material: UV-resistant plastic (base), aluminium
(heat sink)
Temperature range: -20°C to +40°C
Accessories: remote control RC9, Smart Remote
XLED Square
EAN white 4007841 009953
EAN black 4007841 009977
EAN slave white 4007841 010010
EAN slave black 4007841 010034
XLED Square XL
EAN white 4007841 009922
EAN black 4007841 009946
EAN slave white 4007841 009984
EAN slave black 4007841 010003
*Sensor version
13
Open the doors to progress
and discover a language that connects generations.
14
15
Smart Remote
Communication via
infrared interface.
One for all.
Smart Remote
Future-proof
Bluetooth technology.
The never-ending search for the right remote control is over! With the Smart Remote,
all STEINEL sensors and sensor-switched lights can be controlled very conveniently with
just one device. Simply download the appropriate app to your smartphone or tablet, connect via Bluetooth to the remote control Smart Remote and control all STEINEL products
from a central point via infrared. It doesn't get any smarter than that!
Affixing pad for
permanent connection
to tablet or smartphone.
App for intuitive control
of lighting and sensors.
Download app.
Connect Smart
Remote via Bluetooth.
Device is
ready for use.
App for Android
and iOS.
Battery powered for
mobility and flexibility.
Technical specifications
Dimensions: (H x W x D): 115 x 52 x 26 mm
Power: 2 batteries, type AAA
Products controllable by Smart Remote:
Presence detectors: IR Quattro, IR Quattro HD,
IR Quattro SLIM, IR Quattro SLIM XS, HF 360,
Dual HF, US 360, Single US, Dual US, DualTech
Presence switches: IR 180, HF 180
Replaces the following remote controls:
RC1, RC2, RC3, RC4, RC5,
RC6, RC7, RC8, RC9, RC10
16
Photo-cell controller / light sensor:
NM 5000-3, Light Sensor Dual
Smart Remote
EAN 4007841 009151
Sensor-switched indoor lights: RS PRO 5000,
RS PRO 5002, RS PRO 5100, RS PRO 5200,
RS PRO 5500, RS PRO 5800 LED,
RS PRO 5850 LED, RS PRO DL LED 15/20 W,
RS PRO LED Q1
Sensor-switched floodlights: XLED PRO Square,
XLED PRO Wide
Motion detectors: iHF 3D, sensIQ, sensIQ S,
IS 3360, IS 3360 MX, IS 345, IS 345 MX,
IS 3180, HF 3360
17
Light management revolutionarily simple.
LiveLink
LiveLink is the new DALI-based light management system developed by STEINEL in cooperation
with the lighting specialists TRILUX. What used to be very complex and time intensive can now be
configured with LiveLink in just a few minutes without any specialist knowledge or programming
experience. Operation is simple and intuitive via tablet or smartphone. The LiveLink app assists
you step by step through the installation process. Common application scenarios, such as in an
office or classroom, are stored as so-called Use Cases and make planning particularly simple.
Special, highly sensitive LiveLink sensors from STEINEL control the light precisely depending on
room use and the amount of daylight present.
18
19
LiveLink. Software developed for
today's electrical fitters.
The app. Plan intelligently and
configure via drag and drop.
LiveLink anticipates. Many applica- The right solution for every
tions are already preconfigured.
building and every application.
In cooperation with planners, architects, electrical fitters
and users, we placed the greatest value on the needs of
the users when developing this software. The graphic user
interface and the intuitive user prompts are proving to be
great advantages in practice. These not only make fast,
easy work of installing the LiveLink components but also of
configuring them and setting them for the specific situation.
For commissioning, the "LiveLink Install" app provides the
fitter with numerous intelligent functions for configuring the
light management system quickly, accurately and easily.
The LiveLink apps are available for iOS and Android operating systems and are extremely user-friendly. The "LiveLink
Control" app allows the end user to adjust light quickly and
simply to personal or situational demands.
To simplify the planning and installation of lights, LiveLink
offers the user a series of preset room configurations. These
"Use Cases" give the user the certainty of optimised lighting
configured in compliance with industry standards. Grouping
lights and presetting them accordingly ensures that the
electrical fitter can commission the light management
system without any effort at all.
Search for Use Case
Livelink combines knowledge of architectural conditions
and various industry-specific requirements. It provides
electrical fitters and users with professional and yet simple
and secure access to the possibilities of lighting control.
This way, almost every segment and application can benefit
from LiveLink because it caters to any scenario and standard.
Office
Industry
Health care
Shop
At home
Education
Assign components
Intuitive operation
Assign sensor functions
20
Done
21
LiveLink
Addressable DALI - simpler than ever before.
The LiveLink system can be fitted with all DALI lights.
This is where TRILUX comes in, with a comprehensive
range of options for all sorts of different applications,
giving planners and architects broad creative flexibility
in providing optimum lighting for any situation.
Light management was never more reliable and quicker to plan, install and operate than it
is with LiveLink. With just one control device and two convenient apps, individually definable
spaces can be configured and controlled in next to no time. Installing LiveLink starts with
conventional DALI wiring: the components - lights, sensors and switches - are connected
to the control device via DALI. The control device and lights also require a standard power
connection.
The control device features a DALI interface and can be
controlled by tablet, smartphone or switch. It can operate
up to 16 light groups and 64 individual components.
An integrated, autonomous WiFi network provides optimum
connection and security.
The LiveLink switch coupler provides the capability
of integrating up to four standard switches into the the
LiveLink system. Installed simply behind the switches
in the concealed box. Saved lighting scenarios can be
assigned to individual buttons, making them available
for selection in everyday use at the press of a button.
The "sensory organs" of the LiveLink system are the STEINEL sensors
of the LiveLink series. Whether infrared or high-frequency technology,
whether room, corridor or light sensor, the range offers the right sensor
for any application.
With the "LiveLink Install" app, the LiveLink system offers the
appropriate software for configuration and commissioning.
The "LiveLink Control" app is for the user and can be operated from tablets or smartphones for setting the brightness of
lights or for selecting lighting scenarios.
22
23
LiveLink products overview
LiveLink control box
Dimensions: (H x W x D) 21 x 204 x 30 mm
Power supply: 220 - 230 V, 50 / 60 Hz
Interfaces: DALI and WiFi
DALI supply: integrated DALI bus supply,
max. 64 bus users
WiFi connection: 868 MHz
Control: via tablet and
LiveLink Install app for commissioning
Via smartphone/tablet and
LiveLink Control app for control
Additional inputs: switch input (230 V)
with touch-dim function for one or
more lighting groups or for selecting programmed
lighting scenarios
Material: plastic
EAN 4007841 013653
Switch coupler: 4x DALI
Dimensions: (Ø x H) Ø 50 x 16 mm
Power supply: DALI bus voltage
Current consumption: 1 DALI user
Inputs: 4 inputs for
conventional switches
Commissioning: via tablet
and LiveLink Install app
Functions: freely selectable during
commissioning: Touch-dim function
of one or more light groups,
selecting programmed light scenarios
Material: plastic
EAN 4007841 013660
24
IR Quattro HD LiveLink
Dimensions (W x H x D): 120 x 120 x 70 mm
Power supply: DALI bus voltage
Current consumption: 2 DALI users
Sensor technology: passive infrared,
4800 switching zones, 4 pyro sensors
Mechanically scalable reach
Angle of coverage: 360°
Mounting height: max. 10 m
Reach (H = 2.8 m): max. 8 x 8 m presence/radial,
max. 20 x 20 m tangential
Settings: via LiveLink app
Light level: 10-1000 lux, daylight operation
Time setting: 30 sec - 60 min, IQ mode
User-friendly functions: motion detection,
light-level measurement, time setting,
semi-automatic / fully automatic, teach mode,
constant-lighting control
IP rating / protection class: IP 20 / III
Temperature range: -20°C to +55°C
Material: UV-resistant plastic (casing), HDPE (lens)
EAN 4007841 009717
IR Micro LiveLink
Dimensions: (Ø x D) 80 x 21 mm
Power supply: DALI bus voltage
Current consumption: 1 DALI user
Sensor technology: passive infrared
Angle of coverage: 360° with 90° angle of
aperture
Mounting height: 2.8 m
Reach: 4 x 4 m presence and radial,
6 x 6 m tangential
Settings: via LiveLink app
Light level: 2-2000 lux
Time setting: 1 min – 60 min, IQ
User-friendly functions: motion detection,
reach setting, brightness measurement,
constant light control, semi-automatic /
fully automatic, teach mode, test mode,
daylight mode
IP rating / protection class: IP 20 / III
Temperature range: 0°C to +40°C
Material: UV-resistant plastic (casing), HDPE (lens)
EAN 4007841 009748
IR Quattro SLIM XS LiveLink
Dimensions: (H x W x D) 80 x 80 x 51 mm
Power supply: DALI bus voltage
Current consumption: 2 DALI users
Sensor technology: passive infrared
Angle of coverage: 360°
Mounting height: max. 4 m
Reach: 4 x 4 m presence, radial, tangential
Settings: via LiveLink app
Time setting: 1 min – 60 min, IQ
Twilight setting: 10 - 1000 lux
User-friendly functions: motion detection,
reach setting, brightness measurement,
constant-control, time setting,
semi-automatic / fully automatic, teach mode,
test mode, daylight operation
IP rating / protection class: IP 20 / II
Temperature range: 0°C to +40°C
Material: UV-resistant plastic (casing), HDPE (lens)
EAN 4007841 033040
Dual HF LiveLink
Dimensions (W x H x D): 120 x 120 x 75 mm
Power supply: DALI bus voltage
Current consumption: 7 DALI participants
Sensor technology: high frequency, 5.8 GHz
Angle of coverage: corridor
Mounting height: max. 3.5 m
Reach (H = 2.8 m): max. 20 x 3 m,
(10 x 3 m in each direction)
Settings: via LiveLink app
Light level: 10-1000 lux, daylight operation
Time setting: 30 sec - 60 min, IQ mode
User-friendly functions: motion detection,
light-level measurement, time setting,
semi-automatic / fully automatic, teach mode,
constant-lighting control
IP rating / protection class: IP 20 / III
Temperature range: -20°C to + 55°C
Material: UV-resistant plastic
EAN 4007841 009700
LiveLink KNX gateway
Integration of LiveLink components
into KNX building automation
EAN 4007841 034009
25
LiveLink products overview
LiveLink-Starterkit
+
Light Sensor Dual LiveLink
Dimensions: (H x W x D) 95 x 95 x 65 mm
Power supply: DALI bus voltage
Current consumption: 1 DALI user
Sensor technology: photodiode
Angle of coverage: directed and diffuse
Light level: 2-1000 lux
Settings: via LiveLink app
User-friendly functions: brightness measurement
diffuse or directed, constant-lighting control
Mounting: ceiling, wall
Suitable for use: indoors and outdoors
IP rating / protection class: IP 54 / III
Temperature range: 0°C to +40°C
Material: UV-resistant plastic
EAN 4007841 009762
26
IS 345 MX Highbay LiveLink
Dimensions: (H x W x D): 95 x 95 x 65 mm
Power supply: DALI bus voltage
Current consumption: 2 DALI users
Sensor technology: passive infrared
Angle of coverage: 51° with 9° angle of aperture
Mounting height: 4 - 14 m
Reach: max. 30 x 4 m (radial)
Settings: via LiveLink app
Light level: 2-1000 lux
Time setting: 1 min – 60 min, IQ
User-friendly functions: motion detection,
brightness measurement, time setting,
semi-automatic / fully automatic, teach mode,
test mode, daylight operation
IP rating / protection class: IP 54 / III
Temperature range: -20°C to +50°C
Material: UV-resistant plastic (casing), HDPE (lens)
EAN 4007841 009731
IS 3360 MX Higbay LiveLink
Dimensions: (H x W x D): 95 x 95 x 65 mm
Power supply: DALI bus voltage
Current consumption: 2 DALI users
Sensor technology: passive infrared
Angle of coverage: 360°
Mounting height: 4 - 14 m
Reach: max. 18 m (tangential)
Settings: via LiveLink app
Light level: 2-1000 lux
Time setting: 1 min – 60 min, IQ
User-friendly functions: motion detection,
brightness measurement, time setting,
semi-automatic / fully automatic, teach mode,
test mode, daylight operation
IP rating / protection class: IP 54 / III
Temperature range: -20°C to +50°C
Material: UV-resistant plastic (casing), HDPE (lens)
EAN 4007841 009724
+
LiveLink-Starterkit
Includes LiveLink control box,
IR Quattro HD LiveLink and the
switch coupler 4x DALI
EAN 4007841 033958
27
The SmartHome standard for the trade.
eNet
Buildings can now be retrofitted and equipped with intelligent Smart Home technology
effortlessly and without dirt or complicated new installation work. The cooperation of leading
manufacturers now provides the platform for professional automation in existing buildings.
With eNet, existing electrical installations can now be upgraded conveniently with smart,
new functions. The devices can be remote-controlled either individually or in groups and from
home or out and about. eNet is designed as the industry standard which further cooperation
partners can join in the future. With the new bidirectional 868 MHz wireless system, installations
such as lighting and roller shutters can be linked together intelligently. Energy sensors let you
record how much energy you are using. eNet gives you smart, versatile, quickly installed,
upgradeable, energy-efficient and future-proof convenience.
28
29
The start of a big story.
Our eNet range starts with a top-calibre triumvirate. The new XLED PRO floodlights for
illuminating large or extremely wide areas and the sensIQ, an infrared motion detector
that sets standards in all disciplines are forerunners of an upcoming comprehensive range
of STEINEL products. In connection with the eNet components and the products of other
top-calibre brands, the course for the future has been set.
The eNet wireless standard
integrates all actuators and
eNet-capable products into
the system.
The eNet server is the wireless
module, control room and intelligent centre of the eNet system.
sensIQ eNET
Power supply: 220 - 240 V, 50 / 60 Hz
Mounting: ceiling, wall
Output: max. 2000 W
maximum of 8 fluorescent lamps /
LED lamps C < 176 µF
Sensor technology: passive infrared
Angle of coverage: 300° with 180° angle of
aperture
Reach: 3 x 20 m,
adjustable in 3 directions by turning
Twilight setting: 2 - 2000 lux
Time setting: 5 sec - 15 min
Wireless system: 868 MHz eNet
IP rating / protection class: IP 54 / II
Material: UV-resistant plastic
Incl. wall mount and RC1 remote control
EAN white 4007841 020439
EAN black 4007841 020422
EAN stainless steel 4007841 020415
XLED PRO Wide eNET
Dimensions: (H x W x D) 188 x 265 x 126 mm
Power supply: 220 - 240 V, 50 / 60 Hz
Output: 24.8 W
Brightness : 2400 lumens
Efficiency: 97 lm/W
Colour temperature: 4000 K / SDCM 3
Colour rendering: Ra ≥ 80
LED life expectancy: 50,000 h (L70B10 to LM80)
LED cooling system: passive Thermo Control
Sensor technology: passive infrared
Angle of coverage: 240°
Reach: max. 12 m
Twilight setting: 2 - 1000 lux
Time setting: 5 sec - 15 min
Basic light level: 3%, optionally for 10 min,
30 min or all night long
Soft light start: Yes
Manual override: 4 hours, selectable
Wireless system: 868 MHz eNet
IP rating / protection class: IP 54 / I
Material: UV-resistant plastic (base),
aluminium (heat sink)
Temperature range: -20°C to +40°C
Accessories: remote control RC9, Smart Remote
EAN white 4007841 010218
EAN black 4007841 010249
XLED PRO Square eNET
Dimensions (H x W x D) 230 x 178 x 130 mm
Power supply: 220 - 240 V, 50 / 60 Hz
Output: 24.8 W
Brightness : 2400 lumens
Efficiency: 97 lm/W
Colour temperature: 4000 K / SDCM 3
Colour rendering: Ra ≥ 80
LED life expectancy: 50,000 h (L70B10 to LM80)
LED cooling system: passive Thermo Control
Sensor technology: passive infrared
Angle of coverage: 240°
Reach: max. 12 m
Twilight setting: 2 - 1000 lux
Time setting: 5 sec - 15 min
Basic light level: 3%, optionally for 10 min,
30 min or all night long
Soft light start: Yes
Manual override: 4 hours, selectable
Wireless system: 868 MHz eNet
IP rating / protection class: IP 54 / I
Material: UV-resistant plastic (base),
aluminium (heat sink)
Temperature range: -20°C to +40°C
Accessories: remote control RC9, Smart Remote
EAN white 4007841 009991
EAN black 4007841 010027
Simple configuration via tablet
or smartphone. End users can
also operate the system via the
eNet Mobile Gate.
30
31
The greatest gift for an inventor is a smile.
32
33
Presence switches
Patented 2-wire
technology, perfect
for LED lamps.
Switches every lamp
without flickering or shimmering.
Back to the future. Modern lamps make sense, are fun and are being installed in all applications.
Unfortunately, however, the combination of conventional sensor switches and energy-saving
lamps often results in flickering. Trouble-free, reduced power consumption is only possible here
by using halogen lamps. STEINEL now offers a solution to this problem. The IR 180 UNIVERSAL
features a super-capacitor and electrical isolation of the cable by a relay to prevent leakage
currents. As a result, any lamp can be switched on without flickering. A small invention with
great effects and a true global first.
Halogen
T5
LED
Integrated switch for
manual override.
CFL
IR 180 Universal
Conventional
2-wire switch
High-precision 180°
infrared sensor with
a reach of 20 m.
SuperCap energy memory
for 0 W power consumption
in standby mode.
34
35
Presence switches
Patented 2-wire technology,
perfect for LED lamps.
World first for modernisation and refurbishment.
IR 180 UNIVERSAL
You can now upgrade existing buildings with state-of-the-art technology in next to
no time! The infrared sensor switch IR 180 UNIVERSAL in a 2-wire design makes it possible.
It can be installed with conventional 2-wire cables, making it a real sensation. The integrated
super-capacitor, which feeds the sensor switch in the event of a power interruption, ensures
perfect operation thanks to the zero-watt standby mode consumption. This means it can switch
every lamp on and off, making it a future-proof investment. The IR 180 UNIVERSAL comes in
a completely new design and can be installed quickly and easily in all existing walls.
Integrated
switch for manual
override.
SuperCap energy
memory for 0 W
power consumption
in standby mode.
5JAHRE
GARANTIE
180°
max. 20 m
2 - 1000 Lux
30 sec - 30 min
functional
warranty
High-precision 180°
infrared sensor with
a reach of 20 m.
white
silver
Technical specifications
Dimensions (H x W x D): 80 x 80 x 20.5 mm
Power supply: 220 - 240 V, 50 / 60 Hz
Power consumption: 0 W,
charge current depending on lamp
Storage technology: super-capacitor
energy storage
Output: max. 200 W, maximum of 6 fluorescent
lamps / LED lamps C ≤ 132 µF
Sensor type: passive infrared
Angle of coverage: 180°
Reach: max. 20 m
Twilight setting: 2 - 1000 lux
Time setting: 30 sec - 30 min
36
User-friendly settings: normal / test operation,
semi- / fully automatic, switch active / switch
inactive, ON / ON-OFF
IP rating / protection class: IP 20 / II
Accessories: adapter for Busch-Jäger and Jung
switch ranges
IR 180 Universal
EAN COM1 white 4007841 033149
EAN COM1 silver 4007841 033132
37
Presence switches
3-wire sensor switch ideal
for new buildings.
The new standard for infrared sensor switches.
IR 180
New design, intelligent technology, fast installation. IR 180 is the answer to providing
infrared sensor switches in new buildings or existing property. 180 denotes the sensor's huge
angle of coverage. It misses absolutely nothing, either to the left or right. The IR 180 also
comes in a new design and can be installed quickly and easily. The KNX version also indicates
temperature and air humidity.
Integrated
switch for manual
override.
5JAHRE
GARANTIE
180°
max. 20 m
2 - 1000 Lux
30 sec - 30 min
functional
warranty
High-precision 180°
infrared sensor with
a reach of 20 m.
white
silver
Technical specifications
Dimensions (H x W x D): 80 x 80 x 20.5 mm
COM1 / COM 2:
Power supply:
220 - 240 V, 50 / 60 Hz
Output: max. 2000 W, max. 6 fluorescent lamps /
LED lamps C ≤ 132 µF
DALI:
Power supply: DALI bus voltage,
1x 2-conductor DALI control line /
broadcast for 2 x 12 electronic ballasts,
switching operation.
38
Sensor type: passive infrared
Angle of coverage: 180°
Reach: max. 20 m
Twilight setting: 2 - 1000 lux
Time setting: 30 sec - 30 min
User-friendly DALI functions: constant-lighting
control, basic light at 10 - 50% for 0 - 30 min or
all night long
IP rating / protection class: IP 20 / II
Accessories: adapter for Busch-Jäger and Jung
switch ranges
IR 180
EAN white COM1 4007841 029944
EAN white COM2 4007841 033002
EAN white DALI 4007841 033026
EAN white KNX 4007841 032975*
EAN silver COM1 4007841 032982
EAN silver COM2 4007841 032999
EAN silver DALI 4007841 033019
EAN silver KNX 4007841032968*
*Technical specifications in the KNX brochure
39
Presence switches
3-wire sensor switch ideal
for new buildings.
Reliably detects through partition walls.
HF 180
Integrated
switch for manual
override.
High-frequency technology meets top-calibre design! Producing an angle of coverage of
180°, the sensor switch HF 180 not only scores top marks in performance, it looks great too.
The HF sensor technology detects every movement and switches instantly. The solution for
offices, entrance rooms and washroom facilities where movement needs detecting through thin
partition walls. Intelligent technology that not only looks good, but is also easy to install.
The KNX version also indicates temperature and air humidity.
5JAHRE
GARANTIE
180°
Ø 1 - 8 m
2 - 1000 Lux
30 sec - 30 min
functional
warranty
Very fast detection regardless
of temperature.
white
180° high-frequency sensor
with Ø 8 m reach.
silver
Technical specifications
Dimensions (H x W x D): 80 x 80 x 20.5 mm
COM1 / COM 2:
Power supply: 220 - 240 V, 50 / 60 Hz
Output: max. 2000 W, max. 6 fluorescent lamps /
LED lamps C ≤ 132 µF
DALI:
Power supply: DALI bus voltage,
1x 2-conductor DALI control line /
broadcast for 2 x 12 electronic ballasts,
switching operation.
Sensor type: High frequency
Angle of coverage: 180°
Reach: Ø 1 - 8 m
Twilight setting: 2 - 1000 lux
Time setting: 30 sec - 30 min
User-friendly DALI functions: constant-lighting
control, basic light at 10 - 50% for 0 - 30 min or
all night long
IP rating / protection class: IP 20 / II
Accessories: adapter for Busch-Jäger and Jung
switch ranges
HF 180 (3-wire)
EAN white COM1 4007841 032883
EAN white COM2 4007841 032913
EAN white DALI 4007841 032937
EAN white KNX 4007841 032876*
EAN silver COM1 4007841 032890
EAN silver COM2 4007841 032906
EAN silver DALI 4007841 032920
EAN silver KNX 4007841 032869*
*Technical specifications in the KNX brochure
40
41
Presence detectors
Fits in any concealed
box. Overall height
of just 6 mm.
Our slimmest presence detector.
Now even smaller in concealed box format.
IR Quattro SLIM XS
Only retina lens of
its kind in the world.
Due to popular demand. The extra slim IR Quattro SLIM XS presence detector virtually
disappears in the wall or ceiling. Thanks to the new and practical concealed box format it
forms a remarkably unobtrusive symbiosis with the home environment and can now be
installed in any standard concealed box. In short: our slimmest presence detector would
seem to be pretending it wasn't even there - and yet is absolutely present when it matters.
5JAHRE
GARANTIE
360°
max. 4 x 4 m
presence
10 - 1000 Lux
30 sec - 30 min
functional
warranty
High-precision 360°
infrared senor with
16 sq.m. square presence detection zone.
Setting only via
remote control
or Smart Remote
Technical specifications
Dimensions (H x W x D) COM1: 80 x 80 x 55 mm
Power supply COM1: 220-240 V, 50 / 60 Hz
Output: max. 1000 W, maximum of 8 fluorescent
lamps / LED lamps C < 176 µF
Sensor technology: passive infrared
Angle of coverage: 360°
Reach: 4 x 4 m presence, radial, tangential
Twilight setting: 10 - 1000 lux
Time setting: COM1: 30 sec – 30 min, IQ
IP rating / protection class: IP 20 / II
Accessories COM1: remote control RC5, RC8,
Smart Remote
42
IR Quattro SLIM XS
EAN COM1 4007841 032951
EAN KNX 4007841 033033*
*Technical specifications in the KNX brochure
43
What's most important with intelligent technology?
Every detail.
44
45
Multi-sensor technology
The only camera sensor
of its kind in the world.
Camera multi-sensor system. Coming close to the future.
HPD 2
It has taken the world's best specialists and universities over 5 years to develop this system
that analyses images directly in the sensor. With the HPD2 – HPD stands for "Human Presence
Detection" – STEINEL makes a quantum leap in sensor technology. Because the HDP2 is the
world's first presence detector that's not only capable of detecting whether people are present
but can also count them. No matter whether they are moving about or not. At the heart of the
person sensor is innovative camera technology that uses a highly sensitive optical system in
combination with a complex mathematical algorithm. The HPD2 also has integrated temperature
and air-humidity sensors, opening up completely new possibilities in building automation.
Light, heating and air-conditioning can finally be controlled in line with demand for the number
of people present in a room.
Output of temperature and air humidity
measured.
Integrated, advanced image
recognition and real-time
processing. 150,000 positive
images and 7 million negative
images.
5JAHRE
GARANTIE
110° sensor
max. 15 m
2,5 - 6 m
movement
presence
brightness
temperature
air humidity
number
of people
functional
warranty
15 m reach with
5 precisely definable
detection zones.
Technical specifications
Dimensions: (H x W x D): 156 x 86 x 52 mm
Power supply: KNX bus voltage
IP: Power over Ethernet (PoE)
Sensor technology: Camera technology
Angle of coverage: 110°
Reach: 15 m
Twilight setting: 2 - 2000 lux
Time setting: 1-255 min
Communication objects HPD 2:
KNX twisted pair:
Light channel with constant-lighting
control per zone
Number of people present for up to 5 zones
46
Threshold control possible
Output of temperature, air humidity
and light level
Presence output
Output of the values for all zones accumulated
Ethernet (IP):
Output of the compiled sensor data
Number of persons in total / per zone
Light level total / per zone
Presence
Temperature
Air humidity
Brightness
IP rating / protection class: IP 20 / III
Temperature range: 0°C to +40°C
Material: UV-resistant plastic
HPD 2
EAN KNX Twisted Pair 4007841 033200
EAN Ethernet (IP) 4007841 033965
47
Complexity is best solved with simplicity.
And with the right solution for every need.
48
49
Motion detectors
For all interfaces. For even more freedom.
The 3000 series.
Either with infrared or
high-frequency technology
and light sensor technology.
Because demand for our sensors is growing and growing, we have aligned our 3000 series
with the needs of our customers and complemented our range. There are now surfacemounted and concealed versions of all sensors and, wherever it makes sense, round instead
of square casings. The true innovation, however, is greater compatibility with the main interfaces.
Whether COM1, COM2, DALI, KNX or LiveLink - with our 3000 series, even the largest plan
can be turned into reality with the least amount of effort. And we are particularly proud of this:
in connection with our Smart Remote remote control, configuration and control can now be
performed simply and conveniently via tablet or smartphone.
Precision lenses developed for
the respective area of application.
Versions for surface-mounted
installation, concealed installation
and ceiling installation.
Interfaces:
COM1, PF, KNX, DALI, LiveLink.
The 3000 series can be controlled
remotely via the
Smart Remote
(LiveLink versions
excepted)
50
51
Motion detectors
8 sensors. 4 designs.
5 interfaces. 79 products.
The 3000 series.
Schnittstellen
IS 3360
IS 345
HF 3360
COM1
•
•
•
PF
•
•
•
Light Sensor Dual
IS 3360 MX Highbay
IS 345 MX Highbay
•
•
IS 3180
NM 5000-3
•b+w
Concealed installation, round
KNX
•
•
•
DALI
•
•
•
COM1
•
•
•
PF
•
•
•
KNX
•
•
•
DALI
•
•
•
COM1
•
•
•
PF
•
•
•
KNX
•
•
•
DALI
•
•
•
COM1
•
•
PF
•
•
•
LiveLink
Concealed installation, square
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LiveLink
Surface-mounted installation, round
•
LiveLink
Surface-mounted installation, square
KNX
•
•
•
DALI
•
•
•
LiveLink
52
•
•
•b+w
53
Motion detectors
Interfaces for
COM1, PF, DALI and KNX.
For mounting heights
of up to 4 m.
With far-sightedness. And all-round vision.
IS 3360
Large spaces, multi-storey car parks and production buildings with ceiling heights
of up to 4 m rarely provide installation surfaces every metre. These environments call
for motion detectors with a long reach. Like the IS 3360. It detects any tangential movement
within an all-round radius of 20 metres. Even installed at heights of up to 4 metres. In short:
one IS 3360 covers an area of more than 1000 m²! STEINEL Infrared technology that keeps
its promises.
5JAHRE
GARANTIE
360°
max. 20 m
2 - 2000 Lux
5 sec - 15 min
functional
warranty
High-precision
360° infrared senor.
Surface-mounted,
square
Surface-mounted,
round
Concealed, square
Technical specifications
Power supply COM1 / PF / DALI:
220 - 240 V, 50 / 60 Hz
Output COM1: max. 2000 W, max. 8 fluorescent
lamps / LED lamps C < 176 µF
Output DALI: 1x 2-conductor DALI control line /
broadcast for 30 electronic ballasts
Output PF: 50-240 V, 10 A
Sensor technology: passive infrared
Angle of coverage: 360° with 180° angle of
aperture
Mounting height: 2.5 - 4 m
Reach: max. 20 m
Twilight setting: 2 - 2000 lux
Time setting: COM1, PF, DALI: 5 sec – 15 min
DALI user-friendly function: basic light level
54
Watches over
more than 1000 sq.m.
Concealed, round
0 - 30 min, all night 10 - 50%
IP rating / protection class: IP 54 / II
Temperature range: -20°C to +50°C
Material: UV-resistant plastic
Accessories: remote control RC5, RC8,
Smart Remote
IS 3360
Surface-mounted, square (66 x 95 x 95 mm)
EAN COM1 4007841 010478
EAN PF 4007841 010515
EAN DALI 4007841 010560
EAN KNX 4007841 011635*
Surface-mounted, round (66 x Ø126 mm)
EAN COM1 4007841 033446
EAN PF 4007841 033477
EAN DALI 4007841 033507
EAN KNX 4007841 033538*
Concealed, square (78 x 94 x 94 mm)
EAN COM1 4007841 033460
EAN PF 4007841 033491
EAN DALI 4007841 033514
EAN KNX 4007841 033545*
Concealed, round (78 x Ø124 mm )
EAN COM1 4007841 033453
EAN PF 4007841 033484
EAN DALI 4007841 033521
EAN KNX 4007841 033552*
*Technical specifications in the KNX brochure
55
Motion detectors
Interfaces for
COM1, PF, DALI and KNX.
For installation heights
of 2.5 – 5 m.
Pioneering sensor technology. Targeted detection.
IS 345
Aisles and long corridors place special demands on sensor performance. The detection
area of the sensor must be narrow, but long. Only in this way can the fewest possible sensors
cover sections of the greatest possible length. Tried and proven over and over again, the IS 345
is the specialist for indoor applications of this type. It is specially designed for detection in
corridors and has an angle of aperture of 45°. This means that it can watch over an area of
up to 20 x 4 metres tangentially.
5JAHRE
GARANTIE
360°
max. 20 x 4 m
2 - 2000 Lux
5 sec - 15 min
functional
warranty
High-precision infrared
corridor sensor.
Surface-mounted,
square
Surface-mounted,
round
Concealed, square
Technical specifications
Power supply COM1 / PF / DALI: 220 - 240 V,
50 / 60 Hz
Output COM1: max. 2000 W, max. 8 fluorescent
lamps / LED lamps C < 176 µF
Output DALI: 1x 2-conductor DALI control line /
broadcast for 30 electronic ballasts
Output PF: 50-240 V, 10 A
Sensor type: passive infrared
Angle of coverage: corridor with 45° angle of
aperture
Mounting height: 2.5 - 5 m
Reach: 20 x 4 m tangential, 12 x 4 m radial
Twilight setting: 2 - 2000 lux
Time setting: COM1, PF, DALI: 5 sec – 15 min
DALI user-friendly function: basic light level
56
Lens specifically geared to
corridors with a detection zone
of 20 x 4 m.
Concealed, round
0 - 30 min, all night 10 - 50%
IP rating / protection class: IP54 / II
Temperature range: -20°C to +50°C
Material: UV-resistant plastic
Accessories: remote control RC5, RC8,
Smart Remote
IS 345,
Surface-mounted, square (66 x 95 x 95 mm)
EAN COM1 4007841 010485
EAN PF 4007841 010539
EAN DALI 4007841 010584
EAN KNX 4007841 011659*
Surface-mounted, round (66 x Ø126 mm)
EAN COM1 4007841 033798
EAN PF 4007841 033828
EAN DALI 4007841 033859
EAN KNX 4007841 033880*
Concealed, square (78 x 94 x 94 mm)
EAN COM1 4007841 033804
EAN PF 4007841 033835
EAN DALI 4007841 033866
EAN KNX 4007841 033897*
Concealed, round (78 x Ø124 mm)
EAN COM1 4007841 033811
EAN PF 4007841 033842
EAN DALI 4007841 033873
EAN KNX 4007841 033903*
*Technical specifications in the KNX brochure
57
Motion detectors
Interfaces for
COM1, PF, DALI and KNX.
For installation heights
of 2 – 2.8 m.
It detects simply everything.
Very fast and if required over 2 storeys.
HF 3360
High-frequency technology is the perfect alternative in areas that can pose problems
for temperature-based infrared sensors. This makes the HF 3360 the ideal solution if you
want to automate lighting in winding basement corridors, stairwells and multi-storey car parks.
It detects the smallest of movements reliably and precisely and ensures the perfect automatic
lighting control - even in stairwells over two storeys high. The HF 3360 is also ideal for alI
entrance areas because light is switched ON as soon as the sensor detects the door opening.
Available in surface-mounted and concealed installation versions, and naturally compatible
with the standard interfaces.
5JAHRE
GARANTIE
360°
Ø 1 - 8 m
2 - 2000 Lux
5 sec - 15 min
functional
warranty
360° high-frequency sensor
with Ø 8 m reach.
Very fast detection regardless
of temperature.
Surface-mounted,
square
Surface-mounted,
round
Concealed, square
Technical specifications
Power supply COM1 / PF / DALI: 220 - 240 V,
50 / 60 Hz
Output COM1: max. 2000 W, maximum of
8 fluorescent lamps / LED lamps C < 176 µF
Output DALI: 1x 2-conductor DALI control line /
broadcast for 30 electronic ballasts
Output PF: 50-240 V, 10 A
Sensor technology: high frequency
Angle of coverage: 360° with 140° angle of
aperture
Mounting height: 2 - 2.8 m
Reach: Ø 1 - 8 m
Twilight setting: 2 - 2000 lux
Time setting: COM1, PF, DALI: 5 sec – 15 min
DALI user-friendly function: basic light level
58
Concealed , round
0 - 30 min, all night 10 - 50%
IP rating / protection class: IP 54 / II
Temperature range: -20°C to +50°C
Material: UV-resistant plastic
Accessories: remote control RC5, RC8,
Smart Remote
HF 3360
Surface-mounted, square (52 x 95 x 95 mm)
EAN COM1 4007841 011734
EAN PF 4007841 010546
EAN DALI 4007841 011604
EAN KNX 4007841 011673*
Surface-mounted, round (52 x Ø126 mm)
EAN COM1 4007841 033668
EAN PF 4007841 033699
EAN DALI 4007841 033736
EAN KNX 4007841 033767*
Concealed, square (64 x 94 x 94 mm)
EAN COM1 4007841033675
EAN PF 4007841 033705
EAN DALI 4007841 033743
EAN KNX 4007841 033774*
Concealed, round (64 x Ø124 mm)
EAN COM1 4007841 033682
EAN PF 4007841 033712
EAN DALI 4007841 033750
EAN KNX 4007841033781*
*Technical specifications in the KNX brochure
59
Photo-cell controllers
Interface for KNX.
Light sensor with two
light measurements.
The duality of light measurement.
Light Sensor Dual
No matter whether focused or diffuse measurements are needed - both work with
the Light Sensor Dual! The challenge must not be underestimated. To obtain usable
information on the lighting situation in a room, it is not sufficient simply to determine general
brightness. It is important to use a combination of measuring the light level at the desk,
for example, and determining diffuse room brightness. This way, errors can be ruled out
for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.
5JAHRE
GARANTIE
2 - 1000 Lux
functional
warranty
Diffuse light measurement
for monitoring
the room brightness.
Surface-mounted,
square
Surface-mounted,
round
Technical specifications
Power supply: KNX bus voltage
Sensor technology: photodiode
Angle of coverage: directed and diffuse
Mounting: ceiling
Angle of coverage: directed and diffuse
Twilight setting: 2 - 1000 lux
KNX parameters:
Output brightness: diffuse and directed
Output, constant-lighting control:
governed by brightness
Output, photo-cell controller:
switching governed by brightness
60
Concealed, square
Directional light measurement for monitoring areas
beneath the sensor.
Concealed, round
Further outputs:
light level, sabotage protection
Temperature range: 0°C to +40°C
IP rating / protection class: IP 54 / III
Material: UV-resistant plastic
Accessories: remote control RC6, RC7,
Smart Remote
Light Sensor Dual
Surface-mounted, square (42 x 95 x 95 mm)
EAN KNX 4007841 011727*
Surface-mounted, round (42 x Ø126 mm)
EAN KNX 4007841 033644*
Concealed, square (54 x 95 x 95 mm)
EAN KNX 4007841 033637*
Concealed, round (54 x Ø124 mm)
EAN KNX 4007841 033651*
61
Motion detectors
Interfaces for COM1, PF,
DALI, KNX and LiveLink.
For installation heights of
up to 14 m.
A head for heights. Powerful reach. Reliable.
IS 3360 MX Highbay
The ceilings are generally quite high in industrial halls and business premises. Good
to know then that even high ceilings do not present a problem to the IS 3360 MX Highbay.
The long-reach motion detector has an extra-large detection zone and remains absolutely
alert even when it is installed at a height of up to 14 metres. The IS 3360 MX Highbay is highly
reliable.
5JAHRE
GARANTIE
360°
max. 18 m
2 - 2000 Lux
5 sec - 15 min
functional
warranty
High-precision
360° infrared senor.
Surface-mounted,
square
Concealed, square
Technical specifications
Power supply COM1 / PF / DALI: 220 - 240 V,
50 / 60 Hz
Output COM1: max. 2000 W, max. 8 fluorescent
lamps / LED lamps C < 176 µF
Output DALI: 1x 2-conductor DALI control line /
broadcast for 30 electronic ballasts
Output PF: 50-240 V, 10 A
Sensor technology: passive infrared
Angle of coverage: 360°
Mounting height: 4 - 14 m
Reach: max. 18 m (tangential)
Twilight setting: 2 - 2000 lux
Time setting COM1, PF, DALI: 5 sec - 15 min
62
Watches over
up to 1000 sq.m.
DALI user-friendly function: basic light level
0 - 30 min, all night 10 - 50%
IP rating / protection class: IP 54 / II
Temperature range: -20°C to +50°C
Material: UV-resistant plastic
Accessories: remote control RC5, RC8,
Smart Remote
IS 3360 MX Highbay
Surface-mounted, square (66 x 95 x 95 mm)
EAN COM1 4007841 033569
EAN PF 4007841 033583
EAN DALI 4007841 010577
EAN KNX 4007841 011642*
EAN LiveLink 4007841 009724
Concealed, square (78 x 95 x 95 mm)
EAN COM1 4007841 033576
EAN PF 4007841 033590
EAN DALI 4007841 033606
EAN KNX 4007841 033613*
*Technical specifications in the KNX brochure
63
Motion detectors
Interfaces for COM1, PF,
DALI, KNX and LiveLink.
For installation heights
of up to 14 m.
The specialist for high-bay warehouses.
And the highest level of surveillance quality.
IS 345 MX Highbay
High-bay warehouses often have narrow aisles and high ceilings. Too high for most
sensors. We have just the right solution: the IS 345 MX Highbay infrared motion detector
was specially developed for mounting at heights of up to 14 m and for precision detection
between narrow aisles. Perched up there, it gives you surveillance quality at the highest
level, literally. So in the future, you can confidently set your sights higher when it comes to
sensor systems! Now also available for concealed installation.
5JAHRE
GARANTIE
360°
max. 30 x 4 m
2 - 2000 Lux
5 sec - 15 min
functional
warranty
High-precision
infrared corridor sensor.
Surface-mounted,
square
Concealed, square
Technical specifications
Power supply COM1 / PF / DALI: 220 - 240 V,
50 / 60 Hz
Output COM1: max. 2000 W, maximum of
8 fluorescent lamps / LED lamps C < 176 µF
Output DALI: 1x 2-conductor DALI control line /
broadcast for 30 electronic ballasts
Output PF: 50-240 V, 10 A
Sensor technology: passive infrared
Angle of coverage: corridor with 9° angle of
aperture
Mounting height: 4 - 14 m
Reach: 30 x 4 m radial
Twilight setting: 2 - 2000 lux
64
Lens specifically geared to
corridors with a detection zone
of 30 x 4 m.
Time setting: COM1, PF, DALI: 5 sec - 15 min
DALI user-friendly function: basic light level
0 - 30 min, all night 10 - 50%
IP rating / protection class: IP 54 / II
Temperature range: -20°C to +50°C
Material: UV-resistant plastic
Accessories: remote control RC5, RC8,
Smart Remote
IS 345 MX Highbay
Surface-mounted, square (66 x 95 x 95 mm)
EAN COM1 4007841 010492
EAN PF 4007841 010522
EAN DALI 4007841 010591
EAN KNX 4007841 011666*
EAN LiveLink 4007841 009731
Concealed, square (78 x 94 x 94 mm)
EAN COM1 4007841 033910
EAN PF 4007841 033927
EAN DALI 4007841 033934
EAN KNX 4007841 033941*
*Technical specifications in the KNX brochure
65
Motion detectors
Interfaces for
COM1, PF, DALI and KNX.
Swivelling multi-lens
with 2 reaches of
8 - 20 m or 4 - 8 m.
Great performers for industry and business.
100% surveillance over up to 500 m².
IS 3180
These sensors are the perfect choice when it comes to protecting industrial and business
premises and making them secure. So it is important to have far-sighted guards that instantly
respond to any movement. The IS 3180 is made for the job. The IP 54 rating reliably protects
its inner values: featuring top-calibre components such as two precision modular pyro sensors
and multi-lens, it watches over almost every last inch of areas measuring a good 500 m².
The concealed installation sensor that combines everything that's important to electrical fitters
and security personnel.
5JAHRE
GARANTIE
180°
max. 20 m
2 - 2000 Lux
5 sec - 15 min
functional
warranty
Watches over
up to 500 sq.m.
High-precision
180° infrared senor.
Technical specifications
Power supply COM1 / PF / DALI:
220 - 240 V, 50 / 60 Hz
Output COM1: max. 2000 W, maximum of
8 fluorescent lamps / LED lamps C < 176 µF
Output DALI: 1x 2-conductor DALI control line /
broadcast for 30 electronic ballasts
Output PF: 50-240 V, 10 A
Sensor technology: passive infrared
Angle of coverage: 180° with 90° angle of
aperture
Reach: basic setting 1: 8 - 20 m,
basic setting 2: 4 - 8 m
Twilight setting: 2 - 2000 lux
66
Time setting: COM1, PF, DALI: 5 sec – 15 min
DALI user-friendly function: basic light level
0 - 30 min, all night 10 - 50%
IP rating / protection class: IP 54 / II
Temperature range: -20°C to +50°C
Material: UV-resistant plastic
Accessories: remote control RC8, RC5,
Smart Remote
IS 3180
Surface-mounted, square (95 x 95 x 66 mm)
EAN COM1 4007841 009113
EAN PF 4007841 010508
EAN DALI 4007841 010553
EAN KNX 4007841 011628*
*Technical specifications in the KNX brochure
67
Photo-cell controllers
Interfaces for
COM1 and DALI.
Photo-cell controller with
integrated night economy mode.
Night illumination as the mood dictates.
And exactly so.
NM 5000-3
Lighting generates emotions! Dramatic shop windows staged with lighting accents, and
hoardings or building facades attract the attention of the observer and project the image of
the owner. All automatically. Whenever the day goes to sleep, NightMatic 5000-3 wakes up
and controls the finest lighting effects. Exactly when it really makes sense to and is wanted,
thanks to the numerous setting options. On the technical side, the NightMatic 5000-3 comes
with innovative, diffuse light measurement. This detects the level of light in its entire surrounding, taking better measurements than conventional light sensors. A must for budget-conscious
management accountants and electricians.
5JAHRE
GARANTIE
2 - 1000 Lux
functional
warranty
Diffuse light measurement
for monitoring complete
ambient brightness.
white
black
Technical specifications
Power supply COM1 / DALI:
220 - 240 V, 50 / 60 Hz
Output COM1: max. 2000 W, maximum of
8 fluorescent lamps / LED lamps C < 176 µF
Output DALI: 1x 2-conductor DALI control line /
broadcast for 30 electronic ballasts
Sensor technology: photodiode
Angle of coverage: Diffuse
Twilight setting: 2 - 1000 lux
IP rating / protection class: IP 54 / III
Temperature range: -20°C to +50°C
Material: UV-resistant plastic
68
NM 5000-3
Surface-mounted, square (95 x 95 x 42 mm)
EAN white COM1 4007841 011697
EAN white DALI 4007841 011703
EAN black COM1 4007841 011680
EAN black DALI 4007841 033729
69
If you say light, you should also say sensor.
An insight that we are glad to share.
70
71
Indoor sensor-switched lights
STEINEL
LED system.
Easy-install concept
for fast installation.
The new benchmark.
Now with basic light.
RS PRO LED R1
Meeting great expectations on aesthetic appeal and technology is actually quite
hard to do on a tight budget. We have managed to do precisely this balancing act with the
RS PRO LED R1. This is where attractive design meets cutting-edge LED and high-frequency
sensor technology in STEINEL quality. Including Easy Install function and pleasant basic light.
And all at a truly attractive price. You'll be surprised. And then stunned.
LED 11w
30 years
(Ø4,5 h /day)
890 lm
81 lm / W
3000 K
neutral-white
4000 K
warm-white
5
Softlichtstart
basic
brightness
manual
override
360°
Ø 1 - 8 m
2 - 2000 Lux
5 sec - 15 min
Basic light level: 20%,
optionally selectable.
JAHRE
GARANTIE
functional
warranty
Integrated 360°
high-frequency
sensor with Ø 8 m
reach.
white
silver
Technical specifications
Dimensions: (H x W x D): ø 270 x 70 mm
Power supply: 220 - 240 V, 50 / 60 Hz
Output: 11 W
Brightness: 890 lm
Efficiency: 81 lm/W
Colour temperature: 3000 K, 4000 K / SDCM 3
Colour rendering: Ra ≥ 80
LED life expectancy: 50,000 h (L70B10 to LM80)
LED cooling system: Passive Thermo Control
Sensor technology: high frequency
Angle of coverage: 360°
Reach: Ø 1 - 8 m
Twilight setting: 2 - 2000 lux
72
Time setting: 5 sec- 15 min
Basic light level: optional, 20%
Soft light start: Yes
Manual override: 4 hours, selectable
IP rating / protection class: IP 20 / II
Material: UV-resistant plastic
Temperature range -10°C to +50°C
RS PRO LED R1
3000 K
EAN white 4007841 728323
EAN silver 4007841 007377
4000 K
EAN white 4007841 728354
EAN silver 4007841 007378
73
Quality and service
STEINEL Brand
• STEINEL has been specialising in sensor technology for over 25 years
• German engineering
• Produced in Europe
STEINEL Customer Service
• Phone: +49 (0)5245 448 188
• E-mail: [email protected]
• Monday – Friday 8 a.m. – 5 p.m.
5 years of warranty are a long time.
Not for our products.
www.steinel.de
• Product overview
• Operating instructions available to download
• Product videos
Everything we sell isn't only developed in-house but made by us too. And
only in Europe. We also check every STEINEL product for perfect working
order before it leaves the factory. This way, we can guarantee the origin,
perfect quality and long life of every product we deliver. With this in mind,
we send out a signal that's seen nowhere else in the industry: a 5-year
functional warranty on all products from STEINEL Professional.
Certified Quality
For us, it goes without saying that all products from STEINEL comply
with European safety standards. Despite involving a huge effort and
not always easy from a technical point of view, we're never deterred.
Because it's all worth it.
So you get certified quality – every step of the way.
Needless to say, our management system holds certification under
Quality Standard DIN EN ISO 9001 and Environmental Management
Systems Standard DIN EN ISO 14001
74
STEINEL Replacement Parts Service
• Availability guaranteed for genuine STEINEL parts
Free planning service
• PROLog / DIALux / Relux
• Phone: +49 (0) 5245 448 307
• Fax: +49 (0) 5245 448 308
• E-mail: [email protected]
STEINEL Academy
• our own Training Centre in Herzebrock is available to you and our mutual customers
• Phone: +49 (0) 5245 448 0
• E-mail: [email protected]
STEINEL near you
• Our own field staff are your direct contacts
• Individually tailored POS modules boost awareness and sales.
75
110045720 02/2016 Subject to technical modification without notice.
STEINEL Vertrieb GmbH | Dieselstrasse 80 - 84 | 33442 Herzebrock - Clarholz | Germany
Phone + 49 (0) 5245 -448- 0 | Fax + 49 (0) 5245 -448- 197
www.steinel-professional.de | www.youtube.com/steinelgmbh

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project