Zalman CNPS8900 Quiet User's Manual
ZALMAN CNPS8900 Series is a high-performance CPU cooler designed to provide excellent cooling for your computer's processor. It features a pure copper and aluminum construction, a long-life bearing, and a PWM control mode that allows you to adjust the fan speed to your liking. The cooler is compatible with a wide range of Intel and AMD sockets, making it a versatile choice for many different computer builds. With its powerful cooling capabilities and PWM control mode, the ZALMAN CNPS8900 Series is an excellent choice for users who are looking for a high-quality CPU cooler.
Advertisement
Advertisement
User's Manual
CNPS8900 Series
Intel Socket 1366/1156/1155/775 CPU
Core i7 Extreme
Core i7
Core i5
Core i3
Core 2 Extreme
Core 2 Quad
Core 2 Duo
Pentium Dual-Core
Pentium D
Pentium 4
Celeron D
AMD Socket FM1/AM3+/AM3/AM2+/AM2 CPU
Zambezi
Llano
Phenom II
Phenom
Athlon II
Athlon X2
Athlon FX
Athlon
Opteron Dual-Core
Opteron
Sempron
To ensure safe and easy installation, please read the following precautions.
www.ZALMAN.com
Ver 1.1
1. Precautions
1) Avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries.
2) Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention.
3)
4)
5)
6)
To prevent possible injuries, gloves must be worn while handling this product.
Excessive force exerted on the fan may cause damage to the fan and/or system.
Use and keep product away from reach of children.
Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
7)
8)
During transportation of the system, the cooler must be removed. Zalman is not responsible for any damages that occur during the transport of a system.
Product design and specifications may be revised to improve quality and performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
2. Specifications
Spec.
Material
Model
Weight
Dimensions
FAN
Bearing-Type
RPM
Noise Level
Input Voltage
CNPS8900 Extreme CNPS8900 Quiet
Pure Copper and Aluminum
400g
120(L) X 120(W) X 60 (H)mm
2 Ball-Bearing Long Life Bearing
1,250 ~ 2,800 RPM ±10%
19.5~35 dBA ±10%
1,000 ~ 1,500 RPM ±10%
19~25 dBA ±10%
12V
3. Installation Requirements
1) Space Requirements
The cooler’s installation requires an unobstructed space of 120mm(width),
120mm(length), and 60mm(height), with the
CPU as a central reference point.
Please check if components such as ODDs and PSU protrude into the required space.
60 mm
120 mm
120 mm
WWW.ZALMAN.COM
1
4.
Components
1) Common Components
Cooler
Backplate
Side Caps Nuts User’s Manual
Bolts (Cooler) Bolts (Clip) Extension Fan Cable
Loading Block Double-sided Tape Thermal Grease
(ZM-STG2M)
3) AMD Components
Intel Clip
(Socket 1366/1156/1155/775)
WWW.ZALMAN.COM
AMD Clip
(Socket FM1/AM3+/AM3/AM2+/ AM2)
2
5. Installation
Common
Connect the extension fan cable to the fan connector of cooler.
Cooler Fan connector
Extension Fan Cable
A. Intel Socket 1366/1156/1155/775 Installation
① Install the Intel clip to the base of cooler using the bolts (Clip).
Please make sure to put the curved part of clip toward the base as shown
in the image.
Intel Clip
WWW.ZALMAN.COM
3
② Install the side cap to the Backplate according to a socket type.
2
Socket 775
Socket 1156/1155
Socket 1366
1
Please note the orientation of the Nuts and the Side Caps.
Caution
O X
③ Socket 1366/1156/1155 Installation
Attach Double-sided Tape to the center of the Backplate and remove the Double-sided Tape’s Cover.
※ Installation of Socket 1366/1156/1155 does not require the Loading
Block.
Double-sided Tape
WWW.ZALMAN.COM
4
④ Socket 775 Installation
Remove the Sticker Cover from the Lower Tier of the Loading Block and
attach to the Backplate.
Loding Block
Attach Double-sided Tape to the Loading Block and remove the Double-sided
Tape Cover.
Double-sided Tape
Caution
Please note of the orientation of the Loading Block's Installation.
O X
WWW.ZALMAN.COM
5
⑤ Align the Backplate’s holes with motherboard’s clip support holes, attach it
to the back side of the motherboard.
⑥ Spread the Thermal Grease on the CPU’s surface and put the Cooler
on the center of CPU and then fasten the Bolts (Cooler) to install the Cooler.
Socket 1366
Socket 1156/1155
Socket 775
Caution
In the case of Tower Enclosure, the direction of heatpipe to be horizontally as shown in the image. The vertical installation can affect the performance of heat dissipation.
O X
⑦ Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan header.
Caution
Please make sure that PWM
Control Mode is activated in the motherboard’s BIOS settings.
M/B
WWW.ZALMAN.COM
6
B. AMD Socket FM1/AM3+/AM3/AM2+/AM2 Installation
① Install the AMD Clip to the base of cooler using the bolts (Clip).
Please make sure to put the curved part of clip toward the base as shown
in the image.
AMD Clip
② Install the side cap to the Backplate.
2
Caution
1
Please note of the orientation of Nuts and side Caps.
O
WWW.ZALMAN.COM
X
7
③ Remove the Sticker Cover from the Lower Tier of the Loading Block
and attach to the Backplate.
Loading Block
Attach Double-sided Tape to the Loading Block and remove the Double-sided
Tape Cover
Double-sided Tape
Please note of the orientation of the Loading Block's Installation.
Caution
O X
④ Take away the fixed Clip support from the motherboard.
M/B
M/B
WWW.ZALMAN.COM
8
⑤ Align the Backplate’s holes with motherboard’s clip support holes, attach it
to the back side of the motherboard.
M/B
⑥ Spread the Thermal Grease on the CPU’s surface and put the Cooler
on the center of CPU and then fasten the Bolts (Cooler) to install the Cooler.
⑦ Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan header.
M/B
Caution
Please make sure that PWM
Control Mode is activated in the motherboard’s BIOS settings.
WWW.ZALMAN.COM
9

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Processor Cooler 11 cm
- Supported processor sockets: Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1
- 25 dB
- Black, Orange