Indicative Technical Specifications for IP based CCTV Surveillance

Indicative Technical Specifications for IP based CCTV Surveillance
Indicative Technical
Surveillance System
Specifications
for
IP
based
CCTV
 All compliances for Camera, Software, Shortage device, networking switches,
UPS should be given on OEM's letter head.
 OEM should provide MAF and certify to provide support for repair, spares
and technical support for full warranty and post warranty period as per
tender.
 Vendor Should buyback of present Video Wall in this tender proposal,
vender will be responsible for de-installation , loading and transportation of
video wall.
 Vendor should reinstalled all cctv room networking.
 4 external nodes at deferent location as per requirement.

1- IP 3MP Box Camera with varifocal lens
SL Feature
No.
1
2
3
4
5
6
7
8
9
10
11
12
Description
1/3” 3.0 mega pixel or higher progressive scan
Resolution
CMOS sensor with minimum 30 fps @ 3 MP
resolution and Day/Night Capabilities
Minimum illumination
0.1Lux/F1.2(Color) or better, 0.01Lux/F1.2(B/W) or
better
S/N ratio
50 db or more than it
Shutter speed
Auto/manual, 1/3s (or less )~ 1/10000s (or better)
White balance
Auto
Gain Control (GC)
Auto
Back light compensation
preferable
Wide-Dynamic-Range
The camera should give a WDR range of minimum
120db or better
Electronic
Image Should support; Defog & ROI preferable
Stabilization (EIS)
Snapshot
General and event based preferable
Privacy Masking
Up to 4 areas
Video compression
H .264/MJPEG (more formats)
13
14
Noise reduction
Video streaming
3D preferable
Dual Streaming or more
Maximum resolution 2048x1536 with maximum
15 Resolution and frame rate
frame rate 30fps
16 Interface
RJ-45 (10/100Base-T) or more
17 Power Source
DC 12V/AC 24V, PoE (IEEE 802.3af Class3)
It should support memory card of at least 64 GB or
18 Memory card
more(preferably) which can record video locally
with full resolution and frame rate. The card should
be supplied with camera.
DDNS support for smart phone(iphone, android,
19 Special feature
windows phone). DDNS access should be provided
in the supply of the project.
20 Audio Input
1 channel RCA or more
21 Audio output
1 channel RCA or more
22 Alarm In
1 or more
23 Alarm out
1 or more
24 Audio compression
G.711a/G.711u or higher desirable
Windows Microsoft internet explorer 10.x or later,
Firefox, Safari, Google Chrome. The camera on its
25 Supported web browser for web GUI should provide facility to initiate video
remote viewing etc.
recording and audio recording (if activated) even
without Video Management Software.
It should support following protocolsIpv4/Ipv6, HTTP, HTTPS, SSL, TCP/IP, UpnP,
26 Protocol
ICMP, IGMP, SNMP,RTSP, RTP, UDP, SMTP,
NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter,
ONVIF Ver 2.0
The network camera shall offer Hardware based
27 Back Focus mechanism
back focus mechanism for adjustment through web
browser or Video Management System (VMS)
software( Desirable)
28 Security
IP Address filtering
Brightness, contrast, saturation, sharpness, Anti
29 Image Setting
Flicker, White Balance, Shutter Speed, BLC, HLC,
mirror, Flip
30 Operating temperature
-10°C to +50°C or better
31 Whether proof and vandal IP 66 rated weather proofing standards and IK10
proof standard
vandal proof standard external housing.
32 Certification
UL, CE, FCC, RoHS and ONVIF
C/CS Mount Lens Specification
1
Image size
1/3”
2
Focal length (mm)
5 ~ 50mm
3
Max. Aperture
F1.4
4
Mount
5
Lens Control
C/CS
Focus: manual
Iris: Auto (DC drive)
Zoom: Manual
Outdoor Housing Specification
1
General
2
Operating Temperature
Aluminum (case)
Set: -10°C~+50°C
3
4
5
6
7
IP66
IK10
≤90%RH
Inbuilt IR for 30 meters or more
AC24V/2.5A or as per requirement
Ingress Protection
Vandal Resistance
Humidity
IR Distance
Power Supply
2- IP Outdoor Speed Dome PTZ Camera with 2 MP CMOS sensor
SL Feature
No.
1
Imaging device / sensor
2
3
4
5
6
7
Minimum illumination
Electronic Shutter
White balance
Zoom
Focal length
Pan and Tilt Coverage
8
9
10
Pan and Tilt speed
Presets
Intelligent Zoom
11
12
13
14
15
16
17
18
19
20
S/N ratio
Video compression
Video streaming
Resolution and frame rate
Privacy mask
Day & Night
Audio
Networking Interface
Power Source
Security
Description
1/3” CMOS with minimum effective pixels
1920(H) x1080(V) progressive scan or Higher
Color: 0.3 [email protected]; B/W: [email protected] or better
1/1 to 1/10000s or better
Auto
30X optical and 12X digital or better
4.3 mm~129mm or with better range
Pan @ 0°~360° endless, / Tilt @ 0-180(approx.)
Auto Flip 180°
Pan 160°/s and Tilt 120°/s or better
Mini. 200 Presets
It should Zoom only clicked Part of the frame
through computer mouse(preferable)
more than 50 db or better
H .264/MJPEG (or more Formats)
Two Streaming or more
Support Video resolution 1080P (max. 30fps)
Minimum 2 areas
Auto
Yes with preferably compression
1 x RJ-45 (10/100Base-T)
AC 24V
User account and Password protection
22
27
IR(Clarification during pre- Integrated IR up to 100 meter
bid)
It should support memory card of at least 32 GB or
Memory card
more which can record video locally with full
(Clarification during pre-bid) resolution and frame rate. The card should be
supplied with camera.
Operating temperature
-10°C to +50°C
Noise reduction
2D and 3D
Remote Operation
Monitor, PTZ Control, Voice Intercom, System
setting, Playback, File Download, Log Information,
Maintenance & Upgrade
EIS
Should Support EIS, Defog(preferable)
28
Focus
Auto Focus
29
Auto Tracking
Yes
31
WDR
32
Date and Time stamping
33
Tour
It shall have Digital Wide Dynamic Range feature
min. 97 db
Camera should support date and time stamping on
the footage
5 Auto pattern, 8 Auto tour, 5 Auto scan
23
24
25
26
34
Protocol
35
Alarm
It should support following protocolsIpv4/Ipv6, HTTP, HTTPS, SSL, TCP/IP, UpnP,
ICMP, IGMP, SNMP,RTSP, RTP, UDP, SMTP,
NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter,
ONVIF Ver 2.0
Minimum 4 input and 2 output
36
Audio compression
G.711a/G.711u or higher
Motion detection, tampering, virtual line, Disappear
37
In camera Video Analytics
39
Windows Microsoft internet explorer 10.x or later,
Firefox, Safari, Google Chrome. The camera on its
Supported web browser for web GUI should provide facility to initiate video
remote viewing etc.
recording and audio recording (if activated) even
without Video Management Software.
Whether proof standard
IP 66 rated whether proofing standards
40
Certification
38
UL, CE, FCC, RoHS and ONVIF
3- Specifications for VMS
SL No.
Feature
1
VMS should support archiving and management of video feeds.
It should support and shall be scalable to large scale installations and provide
high quality video surveillance that uses all the existing cameras and devices
installed like IP cameras, DVRs, NVRs Encoders etc, Support Onvif 2.0 standard
2
3
6
VMS should support channel grouping manage to arrange the display channel
VMS Should Support e-PTZ(for IP devices), local zoom, PTZ control, PTZ
Preset call, PTZ preset group sequence
VMS
Should
Support
Inbuilt
Analytics
:
Face Detection, Intrusion Detection, Movement Direction Detection, Unattended
Object Detection, Missing Object Detection, Tripwire Detection, Object
Counting, Motion Detection
VMS should support playback of 16 simultaneous cameras with search icon for
both audio & video
7
VMS should support integrated video wall for large scale display of cameras and
various servers installed on single screen
8
VMS should provide Failover for redundancy in case of system failure
9
10
Integrating POS machines should be possible into the single system
E-map support should be available in VMS
4
5
15
VMS should support Smart phones like iPhone, Android, Blackberry etc &
Power CMS software, Mobile Client for Android and Apple Devices
Various OS supported like Windows 32-bit/ 64-bIt
Backup using DVD-RW/ USB drives should be possible
Must provide Motion alarm channel auto pop up, Write alarm log, E-map popup
when alarm happens
Sending SMS (need SMS modern) to phone or alarm alert and image attach to
mail facility must be present
16
17
18
19
20
Supports up to 64 channel recording & viewing on a single PC
Supports Multi monitors
Supports Group or sequence display
Supports redundancy for recording (failover)
Support TV Wall Function
11
12
13
14
21
22
23
Should support large capacity disks, plug and play disks and Raid storage
Instant playback last 10sec ~ 8 min, no need to search
One click Emergency recording
24
25
Camera wise disk calculation based on frame rate and resolution selected
2 Way audio combination, audio chat
26
Advanced programming algorithm to utilize the minimum RAM and CPU and
thereby makes the system more stable
27
30
31
Multi channel POS support with Multi channel POS search
Alarm Alert Sending SMS (need SMS modern) to phone or alarm alert and image
attach to mail
Up to 32 POS machines can be connected to single PC
Alarm Event Motion alarm channel auto pop up, Write alarm log, E-map popup
when alarm happens
Power CMS software, Mobile Client for Android and Apple Devices
32
Storage Support large capacity disks, plug and play disks and Raid storage
33
Should be flexible with Record Stream Video + Audio or just Video
Recording type can be defined as Record Type Normal / motion / sensor / normal
+ motion / motion or sensor,
28
29
34
35
36
Network access using LAN, Ethernet, PSTN, ISDN, ADSL should be present
Remote view on Smart Phone Android/iPhone/iPad client Java. Should Support
IE browser remote directly view
4- Specifications for Unified Storage System
SL.
No.
1
2
3
4
Description
The solution should implement 60TB usable (12x6TB in RAID-6)in a 2U unit form
factor by proper configuration. Suitable Rack / chassis etc. will be provided.
Intel Core-i3 Dual Core 3.3 GHz or Better Processor with minimum 4GB ECC
RAM.
4 10/100/1000 Mbps LAN Ports.
It should support RAID-0, RAID-1,RAID-5, RAID-6 and RAID-10 storage
5
6
7
8
9
10
configurations for redundancy. RAID configurations should support hot-swappable
hard-disk drives that can be removed without powering down the server.
It should have redundant and load sharing power supplies.
It should have minimum 3 Smart fans with built-in redundancy for optimized
cooling.
Supports unlimited block-based Snapshots from Day 1.
Supports iSCSI and Thin Provisioning.
Support of NAS to NAS remote Replication from Day 1.
The system should be capable of storing 30 days video recording of all the cameras
on full resolution and frame rate.
5- Specifications for Client PC/workstation
SL.
No.
1
2
3
4
5
6
7
8
Description
11
Processor: Intel Core i7 4790 4 GHz with 24 inch LED monitor
RAM: 16 GB DDR3
HDD: 2 TB SATA
Optical Drive: DVD-R/W (latest Version) (24x writing speed preferred)
NVIDIA GeForce 210 with minimum 2 GB RAM
Optical Mouse
Keyboard
Port: 10/100/1000 Ethernet, 4USB2.0 Ports (incl. two in the Front side) and other
Ports required for the System/common ports.
Slots: 1 Pcle Gen3x16, 1 Pcle Gen2x4/x16, 2 Pcle Gen2x1, 1 PCl slot
OS: latest Windows Professional version 64 bit or equivalent or higher: All
Hardware and Software to be IPv4, IPv6 Compliant and Dual stack configurable,
wherever applicable.
Antivirus: Latest renowned Antivirus suite licensed.
12
License: All Software’s to be supplied with OEM media and Licensed
9
10
6- Specifications for Server
SL.
No.
1
2
3
4
5
Description
Processor: Intel E5-5600 series 3.2 GHz Xeon 6 core or better Core
RAM: 32GB ECC DDR3, expandable upto 128 GB
HDD: 2 TB , RAID Controller minimum 1 GB
Optical Drive: DVD-R/W (latest Version)
Optical Mouse
6
7
8
Keyboard
Port: 10/100/1000 Ethernet, 4USB2.0 Ports (incl. two in the Front side) and
other Ports required for the System/common ports.
OS: Windows 2007 Professional 64 bit
9
Antivirus: Latest renowned Antivirus suite licensed.
10
License: All Software’s to be supplied with OEM media and Licensed
7- Specification for Layer 2 Network Switch for Central Control Room
SL.
No.
1
2
3
4
5
6
7
8
Description
Layer -2Managed Switch. 19” Rack Mountable. Min. 26 Nos.
10/100/1000BaseT ports shared with Min.4 Nos mini SFP/GBIC slot to
accommodate 1000BaseSx/1000BaseLx Ports. All ports should be switched
ports.(10G)
1+1Support of Redundant Power supply.
Support Layer 3 Static Routing from Day 1.
IPv6 support from Day 1.
Min. 52Gbps switching fabric, Min. 38Mpps forwarding rate. Should be wire
speed switching and routing capabilities and nonblocking architecture.
Supports for 9K Jumbo frame size and 16K MAC address Table.
Support 1K concurrent VLANs. Should have Policy based QoS features.
Should be able to handle complex traffic queuing requirement with full
security.
Should support LACP, STP, SNMP and IGMP Snooping.
Should support Console port for CLI.
8- Specifications of Network Switches for Locations
SL.
No.
1
2
3
4
Description
8xRJ-45 10/100/1000 BASE –T LAN PORTS WITH ATLEAST 4 POE
PORTS
SHOULD SUPPORT MINIMUM 45W POE BUDGET
SHOULD SUPPORT PORT-BASED AND 802.1Q-BASED VLAN
SHOULD SUPPORT ENERGY EFFICIENT ETHERNET 802.3AZ
COMPLAINT
5
SHOULD SUPPORT QOS, LOOP DETECTION, STORM CONTROL AND
RATE LIMITING.
9- Optical Fiber Cable (OFC)
SL Feature
No.
1
Type
2
Cable Type
3
Laying and Marking
10-
OFC should be TE approved and reputed make
Minimum Single Mode 6 (six) core Optical Fiber.
9/125 for outdoor application.
The OFC cables are to be laid overhead and marking
on the cable should be done. OFC cable has to be
spliced and jointed wherever required and tested by
the vendor.
LAN Cable
SL Feature
No.
1
Type
2
Distribution Infrastructure
3
Description
Marking
11- Media Converter
SL Feature
No.
1
Type
2
Fiber Optic Connectors
3
Ethernet Connectors
4
LED Interface
Description
Cat-6 STP cable of reputed make
CAT-6 STP cable should user for camera
termination. Both ends should have STP I/O's and
the Patch Cords should be pre-molded , factory
connectorised & of reputed make.
All cables , patch cords should be marked properly.
Description
IEEE802.3u100BASE-TX, l00BASE- FX (Fast
Ethernet,100Mbps) and Supports Full Duplex
Ethernet Mode.
Single Mode Single Fiber connector
Standard RJ-45 port is provided for connecting to
Ethernet.
LED’s are provided one for detecting the Fiber
Link and the other
for detecting the Tx(Ethernet) Link. When units are
connected and there is data transfer both the LED’s
12-
Power Cable
SL Feature
No.
1
Type
2
Cable Type
13-
Description
3 Core Power Cable of reputed brand
Minimum 1.5 Sq mm Copper wire
Earthing
- One Chemical Earthing is to be provided at control room for the safely of the
equipments.
- Earthing should provide less than 2 Volts between Earth and Neutral point.
14-
SL
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Specifications for Video Wall with Controller
Feature
Description
Size
Bezel to Bezel width
Resolution
Contrast Ratio
Response Time
Brightness
Colour Depth
Aspect Ration
Viewing Angle ( VxH)
Interface - Input
Interface - Output
USB Support
Performance
Surface
Life Time
Min 47" LED in 3x2 Matrix
Max 5 mm
Full HD 1920 X 1080 [email protected] 60 Hz
1,200:1 ( 4500:1)
12 ms
Minimum 450 cd/sq m
1.06 Billion
16:9
178 X178 Degree
HDMI, DP, DVI-D, RGB and Audio In
Out Put : DVI
Yes. Movie & Jpeg
24X7 operations guaranteed
Anti glare
50,000 Hours or more
15S.No.
1
2
3
4
UPS for Remote Location :
5
6
7
Features
Capacity
Battery VDC
Inbuilt Solar Charge controller
Nominal Output Volt
Input
Voltage range(UPS)
Frequency range
Supply
8
Output
Voltage regulation in Inverter mode
9
10
Frequency
Overload Capacity
11
Short circuit Protection
12
13
14
15
16
17
Output Wave form
Transfer time
voltage THD
Inverter efficiency
Cold Start
Load PF
Battery
Grid charger
18
19
20
21
22
23
24
Specifications
Minimum 500VA
12V
PWM charge controller / MPPT type
220/230/240VAC
Single Phase input 160 - 270 V
50 Hz ± 6%
From Electrical Mains/DG set supply
(Generator Compatible)
220/230V +/- 3%
50HZ +/- 0.5Hz
upto 120% for 10 sec , above 120% for
200msec
Fuse /MCB in mains mode and electronics
protection in inverter mode
Sine Wave
< 5 msec
3% on linear load
> 90%
Yes
0.8 Lag
CVCC battery charger to charge in 8 -10
hours time
Solar Charge controller
PWM /MPPT charger depends on panel
wattage
Solar PV Panel
Multi
/
Poly
Crystalline
type.
Single Panel of 125Wp
Battery type
SMF VRLA / Tubular Battery
Battery Backup of 8 hours on Minimum VAH: 750 VAH
connected load
Deep discharge protection
Yes
Battery reverse polarity protection
Yes
25
26
Over charging protection
Remote Monitoring
Display /Indications and alarm
Yes
SNMP based Remote Monitoring
27
LED indication
Solar ON, Mains ON, Inverter ON,
Battery Low, Over load , Battery
Charging, Inverter fault, Battery Mode,
28
LCD meter
29
Audible Alarm
Input Volt, Output Volt, Frequency, Load
Current, DC volt
Battery Low, Over laod, Fault, Battery
operation, Over temperature
30
31
32
33
Physical Characteristics
Audible Noise
Temperature Range
Relative Humidity
Enclosure
34
Certifications
16-
<55 dB at 1 mtr distance
0°C to 45°C
10-95% RH non-condensing
UPS will be installed in outdoor. Outdoor
IP 55 / 65 enclosure for UPS and batteries
should be provided.
ISO 9001:2008 & ISO 14001, CE, ROHS,
OHSAS 18001 certified.
Specifications for Poles
It is need based. Poles should be of appropriate heights and installed properly at each
location ensuring optimum performance of these cameras and network connectivity. All
items should be industry grade, GI coated, weather and lightening proof with appropriate
earthling.
17
Surge and Data Protection -
AC Power supply at each camera end and at Control Room should have the
Surge Protectors

At Each Camera RJ 45 data surge protector should be installed.
18SL
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
19
Specification of LED Screen (Industrial Grade)
Feature
Description
Size
Resolution
Contrast Ration
Response Time
Aspect Ration
Viewing Angle ( VxH)
Motion Picture Updating
Rate
Interface - Input
Interface - Output
USB Support
Performance
Audio Support
Surface
42" LED
Full HD 1920 X 1080 resolution
1,100:1
12 ms
16:9
178 X178 Degree
Minimum 100 Hz
HDMI, DP, DVI-D, RGB and Audio In
Out Put : DP, External Speaker Audio Out
Yes. Movie & Jpeg
24X7 operations guaranteed
Yes, Inbuilt Speaker
Anti glare
Outdoor Box
All the junction box should be IP66 Type with protection form rain and water should
have proper protection. It should have sufficient space for all required accessories.
20.
Technical specification of ANPR and required hardware:
The ANPR System shall enable monitoring of vehicle flow at strategic locations. The
system shall support real-time detection of vehicles at the deployed locations, recording
each vehicle, reading its number plate, database lookup from central server and triggering
of alarms/alerts based on the vehicle status and category as specified by the database. The
system usage shall be privilege driven using password authentication.
S.
No
1
Feature
Specification
Vehicle Detection and The System should automatically detect a vehicle in the camera view using video
detection and activate license plate recognition
Video Capture Module
The System shall automatically detect the license plate in the captured video feed in
real-time.
2
3
4
5
6
The system shall perform OCR (optical character recognition) of the license plate
characters (English alpha-numeric characters in standard fonts).
The System shall store JPEG image of vehicle and license plate and enter the license
plate number into DBMS like MySql, PostgreSQL etc. database along with date
timestamp and site location details.
System should be able to detect and recognize the English alpha numeric License
plate in standard fonts and formats of all four wheelers including cars, HCV, and
LCV.
The system shall be robust to variation in License Plates in terms of font, size,
contrast and color and should work with good accuracy
The system shall be robust to variation in License Plates in terms of font, size,
contrast and color and should work with good accuracy.
Vehicle Detection by The system shall detect the color of all vehicles in the camera view during daytime
and label them as per the predefined list of configured system colors. The system will
Color
store the color information of each vehicle along with the license plate information
for each transaction in the database.
The system shall have options to search historical records for post event analysis by
the vehicle color or the vehicle color with license plate and date time combinations
The system should have option to input certain license plates according to the hot
Alert Generation
listed categories like “Wanted”, “Suspicious”, “Stolen”, etc by authorized personnel.
The system should be able to generate automatic alarms to alert the control room
personnel for further action, in the event of detection of any vehicle falling in the hot
listed categories.
Vehicle Status Alarm On successful recognition of the number plate, system should be able generate
automatic alarm to alert the control room for vehicles which have been marked as
Module
"Wanted",
"Suspicious",
"Stolen",
"Expired". (System should have
provision/expansion option to add more categories for future need).
The Instantaneous and automatic generation of alarms. In case of identity of vehicle
in any category which is define by user.
The system shall enable easy and quick retrieval of snapshots, video and other data
for post incident analysis and investigations.
Vehicle Log Module
The system should be able to generate suitable MIS reports that will provide
meaningful data to concerned authorities and facilitate optimum utilization of
resources. These reports shall include.
(1)Report of vehicle flow at each of the installed locations for Last Day, Last Week
and Last Month.
(2) Report of vehicles in the detected categories at each of the installed locations for
Last Day, Last Week and Last Month.
(3) Report of Vehicle Status change in different Vehicle Categories.
The system shall have Search option to tune the reports based on license plate
number, date and time, site location as per the need of the authorities.
The system shall have option to save custom reports for subsequent use. The system
shall have option to export report being viewed to common format for use outside of
the ANPRS or exporting into other systems.
The system should provide advanced and smart searching facility of License plates
from the database. There should be an option of searching number plates almost
matching with the specific number entered (up to 1 and 2 character distance).
Vehicle Category Editor a. The system should have option to input certain license plates according to
category like "Wanted", "Suspicious", “Stolen", “Expired" etc. by Authorized
personnel.
b. The system should have an option to add new category by authorized personnel.
c. The system should have option to update vehicle status in specific category by
authorized personnel. E.g. on retrieval of stolen vehicle, system entry should be
changed from "Stolen" to "Retrieved".
System should have option to specify maximum time to retain vehicle records in
specific categories.
7
9
Central
Management The Central Management Module shall run on the ANPRS Central Server in control
Module for ANPR, VMS booth. It should be possible to view live video & records and edit hotlists from the
Central Server. ANPR software, VMS, Video Analytics should be from the same
& VA Software
manufacturer, to ensure seamless integrated performance of all required
functionalities. Various combinations of 3rd party software (howsoever integrated
they may be) will not be accepted.
The ANPR & VMS shall be a fully distributed solution, designed for limitless multisite and multiple server installations.
It should support Windows, Linux, and Mac OS on Client machine, independent of
what operating system is there in the servers.
Minimum IP Camera At least 3 MP, IP Box Camera, with 1/3 inch CMOS sensor
Specification
5mm to 50 mm Vari focal Lens IR Corrected High Definition Lens
Dual Stream support: MJPEG stream and H264 independently configurable. MJPEG
Stream must be available in 3MP resolution
Simultaneous Streaming of both H264 and MJPEG streams
At least 3 concurrent access to Camera
MJPEG on RTSP/HTTP and H.264 in RTSP protocol
Fully ONVIF Compliant
IP66 standard
Camera Housing
10
11
IR
Systems requirement
8
12
13
IR led for about 30 Mtr.
Local Server The system must run on a Commercial Off the Shelf Server
(COTS). Outdoor IP 66 Quad core processor based server should
At
be able to cover at least 8 lanes.
Intersection
The system must be based on open platform, and should run on
Operating
Linux or Windows Operating System.
System
The system should work with 4 fps video per ANPR Camera.
Network
Bandwidth
Workstation must run on Windows 7 (64Bit.)or latest Windows
Workstation
OS irrespective of whether the Server is on Linux or Windows.
Localization
& The VMS & ANPR OEM is expected to study the requirement with Police
Department and customize the VMS & ANPR software both product from same
Customizations
OEM to suit their requirements.
The OEM software should have its own development and/or customization centre in
India so that customization as per user requirement can be done as and when
required.
The system shall support automatic failover for recording servers. The allocation of
Failover Support for Cameras to recording servers shall be done automatically by the VMS in a load
ANPR & VMS System.
balanced manner. On failure or any particular Recording server, the cameras
associated with the failed server should be automatically distributed across all the
active servers without any human intervention. When the failed server becomes
active, the cameras will be automatically allocated to the server again without any
human intervention. There shall not be any need to deploy a dedicated redundant
server for this purpose.
14
System
Monitoring
15
Watermarking
Encryption
16
Health monitoring module shall provide intuitive alarm management through
Health the use tools including:- Detailed listing of all active or incoming alarms with
available filters for time period, alarm source, operator and alarm state.
ANPR & VMS shall watermark each and every frame of the Video files with
& Watermarks to authenticate the source of the video. While exporting video segments
to external media (CD/DVD) or to any folder in workstations, the VMS shall allow
encryption of the video files with at least 128 bit encryption technique.
ANPR & VMS shall allow the users to download multiple segments of the video
Video Cart Facility for from the archive to a Video cart, with an option to tag each downloaded segment
ANPR along with VMS with text messages. The Video segments shall be downloaded in a single folder along
with excel spreadsheet where details of each of the video segments are listed. On
Software.
clicking the entry in the spreadsheet the video should start replaying. This is a
mandatory requirement.
SPECIFICATIONS FOR NETWORK SWITCHES FOR LOCATIONS:
SL.
No.
1
2
3
4
5
Description
8xRJ-45 10/100/1000 BASE –T LAN PORTS WITH ATLEAST 4 POE PORTS
SHOULD SUPPORT MINIMUM 45W POE BUDGET
SHOULD SUPPORT PORT-BASED AND 802.1Q-BASED VLAN
SHOULD SUPPORT ENERGY EFFICIENT ETHERNET 802.3AZ COMPLAINT
SHOULD SUPPORT QOS, LOOP DETECTION, STORM CONTROL AND RATE
LIMITING.
Technical Specification for IR
S.No.
1
2
3
4
5
6
7
8
9
10
11
12
Features
LED type:
20pcs 2W dot-matrix IR LED
Voltage:
Power consumption:
Day and night switch:
Mounting:
Temperature:
Grade of protection:
Housing:
Panel:
Beam angle:
IR distance (850nm):
Description
20pcs 2W dot-matrix IR LED
740nm/850nm/940nm
Voltage:
46W
Auto
Wall mounting “U” bracket
-40℃ to 50℃
IP66
Aluminum
High light transmittance toughened glass
60 Degree
90-170m
21 - Technical specification of Face Reorganization software:
Real Time Video ChannelsChannels
8 or more
Functionalities
Enroll, match pay, Video Scrol, setting
Video Source Selection
File, direct show/X net strem
FPS Ratio Selection
Supported
DB per action
Enroll match, enroll and match
DO Relay controller
Supported upto 4 relays auto close
Video context Menu
Match search in video new identity
Cropped image view
IN play mode
Matching results
Flexible number of expected results view 3 color(RGY) treat level
Alerts
Auto generated HTML alerts report
Plug-in-algorithms-Multi algorithm platformMultiple algorithmsTwo algithms as core processing(Detector1+Detector2)
Matching Score
Image Quality control
Confidence control
FAR control
Min face size detection
Max face size detection
Flexible alert scales
Special FeatureAlert Hold
Automatic Daily Database video streams
Similarity filter
Max Best Result
Alerts Email
Optional additional plug in detectors
Parallel Algorithms processing
Algorithm histogram, flexible score ,Calculation algorithm, Power adjustment
adjustable(0-100%) enroll quality face Controlled images
adjustable(0-100%)
adjustable
16 pixels (distance between eyes)
40 pixels (distance between eyes)
flexible adjustment of colored
Alert scales (RGY)
Same person alert” hold property, Prevents repeated alerts for the same
Person (time passed)
The system can act as face control faces appearing in order to Collect Constant
Dally database will be generated and will contain the enrolled data.
-Limits face search to minimum similarity level
-Predefined expected best result
-preconfigured email account will receive
email alerts.
HTML Report
-Generated per alert saved as daily HTML file
SMS
-Optional.
CFAS-FACE Indexing / Recognition Constant face Acquisition system, Real-time & offline face Recognition Data storage- Database catalog
DB type
-MDE+ image Directory
DB Catalog Size
-Virtually Unlimited no limitation on number of database in database catalog
no
limitation on number of concurrent db connections.
Faces / Identities
-Virtually unlimited no limitation on number of faces of identities per
database
Single DB Capacity
-UP to 2 GB of data
Face DB Metadata
-Time Stamp, original image location cropped face image Time stamp,
original image
location ,Extracted face template, Enrollment location , cropped face
image.
Identity DB Metadata
- Flexible Fields.
Fields Extension
-Supported through DB structure edit
DB Location
- Flexible, local and networked
Identity-Face correlation
-AUTOMATIC
Daily Database
- AUTOMATIC
Multiple DB Operations
-Supported multiple database search for specific search targets
Identities import/Export
-Single mouse click import/Export
Parallel processing
-Supported
TCP/IP External Connectivity APIIn port
-per channel supports Remote commands
Out port
-Per channel supports Face matching Events Alerts Counters.
Main Software FunctionalitiesOffline Face Enrolment
Offline Face Search/Match
Online Face Enrolment
- File Directory
- File Directory Video source ( IP /Analog Camera)
-Video source ( IP/Analog Camera)
Online Face Match
Identities Management
Image,
-Video source ( IP /Analog Camera) against stored Faces / Identities
-Create, Delete, Search, print (Report), Export (Single / Group) Assign
Auto Assign Images, Remove Image, Grid View,
Supported MediaInputs
DCCP/RTP
-UDP/RTP Unicast UDP/RTP Multicast, HTTP, MMS, TCP,/RTP Unicast,
Unicast , File, DVD, Video CD/ VCD, SVCD2/DVB, MPEG4 Direct
show direct,
Output Formats
Video Formats
WEB ConnectivityHTML Sharing
point data
-JPEG/MJPEG
- MPEG-1/2, DIVX(1/2/3) MPEG-4 ASP, DivX 4/5/6, XviD3ivXD4, H261,
H263/,264/ MPEG-4AVC Cinepak, Theora Dirac/VC-2 MJPEG (A/B)
WMV1/2, WMV 3, WMV 9, VC- 1 Sorenson 1/3 (QuickTime) DV (Digital
video), on2 VP3 /VP5/ VP6, Indio Video v3 (IB32), Indio video 4/5 (IV41,
IV51) Real Video ½, Real Video ¾
-Ability to share search results and Alerts Reports on IIS, Supports in Edge
distribution.
Features of face detection camera







Easy view of Matching Results
All matched person display
Searching from Image and text
Easy Verification confirmation
DB search by ID, Name/Birthday/Country
Simplified User Interface
Unlimited numbers of client access to server
Support web client access
Note: It is a software based solution comprising of database & success rate of this solution is 20-30% only.
22 - RADIO FOR WIRELESS VIDEO STREAMING (Optional)
Specifications of Point to Point and Point to Multi-Point RadiosThe specification covers procurement of point to point, point to multi point and CPE Radio system complete with
all services such as RF designing, planning, installation, commissioning, post warranty support. The offered
technology should be the latest/best considering the geographical terrain requirement to ensure proper throughput
& latency of the network.
Point to Multi Point Radios
1. The bidder shall carry out the feasibility for assessing the requirement and apprise themselves fully on the site
condition before submitting the offer. It is to be clearly understood by the bidder to establish successful
communication link between various locations and link budget for assured throughput of up to 10, 25 and 50
Mbps aggregated bandwidth at CPE port supporting multiple cameras at each CPE. Actual tower height required
to be finalized by the bidder on proper radio site survey of various locations.
2. Frequency Range: 5.8GHz unlicensed band applicable for India and compatible with existing radio deployed at
Haridwar.
3. The proposed network architecture shall have central base station with connectivity to various CPE Radios in
point to multi point Architecture.
4. The offered radio systems should be of IEEE 802.3 network compliant and should have TEK/ AES 128/AES
256 bit encryption.
5. Base station radio should support TDD synchronization to eliminate mutual Interference at sites with multiple
radios. Collocated Radios should support TDD inter site synchronization using GPS Based Synchronization
support via Ethernet Port.
6. The Radios should have inbuilt spectrum viewer feature.
7. System standards: All the radio equipments shall be conforming to the latest safety and EMC standards & must
have valid TAC (Type Approval Certificate) approval of WPC.
8. ***Network Management: Report generation, Performance Monitoring and Trend Reports, User Access
Control Management SNMP v1& v3, Packet classification to 4 queues according to 802.1p and Diffserv, same
can be configured using EMS or through NMS .The network management system to be deployed at central
location to manage and configure base stations and
remote station unit. The functionality includes automatic and manual device discovering of all network elements
such as base stations, remote stations etc and system shall keep details of all network elements.***
9. Point to Multi-Point Base Stations and Point to Multi-Point CPEs should be of same Make and Manufacturer to
enabling configuration and fault management with single NMS.
10. Offered Radio should be of proven track record and should have been deployed for 200 or more CPEs in one
Single Project for more than one year with Govt/Public Sector Undertaking. Bidder to provide documentary
evidence and regarding deployment and satisfactory performance.
11. OEMs of the products quoted should have own local RMA repair centre in India. The offered system should
have capabilities of self-backhaul by using one of the high capacity CPE to act as back haul to base station
eliminating additional PtoP link for back haul requirements.
12. Point to Multi Point Base Station Radios: System consisting of outdoor and indoor equipment, antenna,
cables (RF/IF) with connectors, system software and all other hardware (Laptop not required) and software
required for operation, monitoring & configuration of the link.
13. The maximum throughput per Base Station Sector should be 200 Mbps or more for provision of high
capacities per CPE for Video applications.
14. The Base Station Sector should be capable of 60º, 90º, 120º coverage using sectorial antenna.
15. Network Interface should support GbE Port at Base station to enable carrying of more than 100 Mbps
aggregate asymmetrical traffic.
16. Spectral efficiency should be 5 Bit/Hz or more
17. Point to Multi Point Radio should support 200,000 pps or more catering high capacity even at lower frame
size
18. VLAN Support: It should be based on IEEE 802.1Q, 802.1P and Q in Q Tagging/Un Tagging
19. ***Channel Bandwidth: 05/10/20/40 MHz with 5 MHz steps.***
20. Distance coverage: upto 25 Kms.
21. Should support SNMPv1, v3 & Telnet.
22. ***No of CPE per base station: Mimimum20 CPE per base station.***
23. Modulation Technology: OFDM – MIMO 2x2
24. Point to Multipoint System should support space diversity
25. IP Protection: IP 67 or Better.
26. Operating temperature:0 to 55 deg. Celsius
CPE Radios:
27. System consisting of outdoor and indoor equipment, antenna, cables (RF/IF) with connectors, system software
and all other hardware (Laptop not required) and software required for operation, monitoring & configuration of
the link.
28. The throughput per CPE should be 10Mbps with option of capacity upgrade to 25Mbps
29. Network Interface should support IEEE 802.3.
30. VLAN Support: It should be based on IEEE 802.1Q, 802.1P and QinQ Tagging/ UnTagging
31. Channel Bandwidth: 05/10/20/40 MHz with 5 MHz steps.
32. Radio should cover distance of 25 Kms.
33. Should support SNMP v1, v3 & Telnet.
34. No of CPE per base station: up to 20 CPE per base station.
35. Modulation Technology: OFDM – MIMO 2x2
36. Point to Multipoint System should support polarization and space diversity
37. IP Protection: IP 67 or Better.
38. Operating temperature: 0 to 55 deg. Celsius
Point to Point Radios:
39. System consisting of outdoor and indoor equipment, antenna, cables (RF/IF) with connectors, System
software and all other hardware (Laptop not required) and software required for operation, monitoring &
Configuration of the link. It should support TDD synchronization to eliminate interference. Collocated Radios
should support TDD inter site synchronization using GPS Based Synchronization support via Ethernet Port.
40. The maximum throughput supported should be up to 200Mbps Aggregated or more per Link.
41. Network Interface should support GbE Interface to enable transporting more than 100Mbps asymmetric
traffic.
42. Spectral efficiency should be 5B/Hz or more
43. The system shall support flexible quality of services and concurrent use of and voice, video and data
applications
44. Channel Bandwidth: 05/10/20/40 MHz with 5 MHz steps.
45. Should support SNMP v1, v3 & Telnet.
46. Distance coverage: up to 30 Kms or more.
47. Modulation Technology: OFDM – MIMO 2x2
48. PtP System should support space diversity
49. Point to Point Radio should support 200,000 pps or more
50. VLAN Support: It should be based on IEEE 802.1Q, 802.1P and QinQ Tagging/Un-Tagging
51. IP Protection: IP 67 or Better.
52. Operating temperature: 0 to 55 deg. Celsius
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement