Why pay for cards, card readers and control panels?

Why pay for cards, card readers and control panels?
access control system
Why pay for cards, card readers and control panels?
•Complete door access
and monitoring
•Fast, and easy
•Automatic
to use hand
template management
•More
•Real
timeconvenient
monitoring
orthan
auditbadges
trail mode
•Easy setup and
•Integrates
administration with all
leading time and
attendance systems
•Less expensive
than you think
Now you can have the security and convenience
of biometric access control – for the cost of a
card-based system.
With HandKey® biometric readers and HandNet
for Windows® software, you'll dramatically
increase your security and eliminate timewasting card administration. With HandKey
readers, your hand is your card.
HandNet gives you networked access control
that's easy to install, simple to use, effortless to
administer, and affordable. You'll enjoy complete
door monitoring in real time for multiple sites.
Remote sites can be monitored via modem or
Ethernet. Every HandKey unit has a built-in door
controller, so you can create an access control
network by simply attaching a PC. You pay only
for the software -- there's no additional cost for
networking up to 1000 doors.
Powerful and easy to use
HandNet software gives you centralized access
control. The system typically runs "online,"
providing real-time, comprehensive door activity
monitoring, remote door control, and alarms. If
the computer goes off-line for any reason, the
networked doors continue to operate without
interruption. HandNet's user-friendly interface
runs on Windows 95/98/2000/ME/NT. Extensive
use of wizards makes setup and system
maintenance effortless.
Tens of thousands of HandKey systems are used
every day in applications worldwide, ranging
from health clubs and computer rooms to
laboratories and stock rooms. Reliability and ease
of use have established Recognition Systems as
the acknowledged global leader in biometric
access control.
new features
Temporary users
When new users are enrolled in the system they can be assigned access to specific readers with definable time zones
through an unlimited number of access profiles. HandNet 2.0 also has a start and end date for access, so temporary
users like consultants or guests can be granted access for a few days, weeks or months. The system then
automatically disables access rights at the end of the term. Users can be reactivated in the software so there is no
need to re-enroll.
Remote Enrollment
Many installations use an enrollment reader to input new users in the system. The new Remote Enrollment feature
enables a reader to be controlled from the software. So a guard behind a glass partition or a supervisor in a distant
office can enroll new users without physically going to the reader.
system
requirements
Import / Export of users
The new import/export feature enables sharing of user information among different HandNet installations. For
example, the security officer in New York can send a user’s record to the office in Taipei. The office in Taipei can then
add the user to their system, setting their own access restriction. When the user arrives he will be in the system and
there is no need to re-enroll.
Computer Pentium 233Mhz or higher
(133Mhz minimum)
Memory 32 Mb (16 Mb minimum)
Drives CD Rom for installation
Floppy or tape drive
features
recommended for backup
Monitor over 1000 HandKey units in real time
Hard-wired communications operate via RS422, using up to 38 serial
ports. Dial-up modem and Ethernet connections are also supported.
Hard Disk 50 Mb minimum,
10 Mb free space required
Monitor SVGA color,
1024 X 768 recommended
Manage over 100,000 users
Add, remove and track users from a central PC. Up to 25 user-definable text fields may be specified for each user, in
addition to standard fields such as name, ID number, access profile, authority level, and rejection threshold. The user
window helps you keep track of people by displaying the last reader used, with date and time of use.
(800 X 600 minimum)
Operating System Windows
95/98/2000/ME/NT
Automatic hand template management
Enroll users at any HandKey in the system. Hand template data from the enrolling HandKey is automatically backed
up on the PC and distributed to selected doors in the system, as specified. Dial-up remote modem locations are also
updated automatically when a new user enrolls.
Supported
Communications RS422 (RSI data converter
DC-102 included)
Dial-up modem
Ethernet
Complete door monitoring
HandNet provides complete door management. Among the conditions that can be monitored in real time are: door
forced open, door open too long, duress, and multiple auxiliary input and output conditions. Authorized operators
may override the lock condition at any door.
Note: RS485 2-wire configuration
cannot be used with HandNet for Windows
without DC-103 intelligent data converter
No dedicated PC required
HandNet can run in the background while other tasks are performed on the PC. When an alarm condition occurs,
the user is notified immediately. If only an audit trail is required, the PC need not be always turned on, because each
HandKey can buffer over 3000 transactions.
Windows is a registered trademark of Microsoft, Inc.
Monitor multiple remote sites
HandNet allows you to dial up multiple remote sites automatically, following a user-definable schedule. Assigning a
name to each reader and site allows instant identification of the location of each HandKey.
PC running
HandNet for Windows®
System Network RS-422, Ethernet, or Modem
Door Switch
Door
Lock
Door Switch
Door
Lock
Door Switch
Door
Lock
Access restrictions
HandNet provides complete access control by user ID, time, and location. The access
profile wizard makes it easy to restrict time and location. HandNet supports 60 definable
time zones, with four start and stop intervals per zone. An unlimited number of access
profiles can be defined. The holiday table can maintain an unlimited number of entries.
Easy maintenance
Automatic transaction archiving minimizes maintenance headaches. You can define the archiving process based on
file size, days elapsed, or the day of the month.
1520 Dell Avenue
Campbell, California 95008 USA
Tel: 408.341.4100 / Fax: 408.341.4101
Email: RSIsales@irco.com
Website: www.handreader.com
RS-SE-1053
Customizable activity reports
Activity reports can be defined and saved, showing only the data you need. The data source can be either current
transactions or archived data.
Simplified activity monitoring
HandNet lets you define filtered activity screens that display only activities for the sites, readers, or users you
specify. Each of these screens are easily accessible through a tabbed display system. A predefined alarm activity screen
makes alarm acknowledgment as simple as a couple of clicks of the mouse.
Ver. 1, Rev. 06-01
© 2001 Ingersoll-Rand Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising