Ultimaker Brochure v2.5

Ultimaker Brochure v2.5
THE ULTIMAKER 2+ FAMILY
PROFESSIONAL 3D PRINTING
Based on the award-winning Ultimaker 2 and Ultimaker 2 Extended and featuring all our
latest innovations and understanding of 3D printing, the Ultimaker 2+ and the Ultimaker 2
Extended+ are two of the most advanced, accurate and reliable desktop 3D printers around.
GEARED FEEDER, INCREASED RELIABILITY
The innovative feeder allows you to easily swap filament and choose the correct pressure for your filament.
SWAPPABLE NOZZLE, GREATER CONTROL
Easily switch between 0.25, 0.4, 0.6 and 0.8 mm nozzles for greater detail or faster print speed.
OPTIMIZED AIRFLOW, SMOOTHER PRINTS
The new fancaps ensure the airflow is aimed perfectly below the nozzle and equally from both sides.
DIMENSIONS AND WEIGHT
357 mm
14.0 inches
357 mm
14.0 inches
388 mm
15.3 inches
488 mm
19.2 inches
342 mm
13.5 inches
357 mm
14.0 inches
Including bowden tube and reel holder
Including bowden tube and reel holder
493 x 342 x 588 mm
(19.4 x 13.5 x 23.1 “)
493 x 342 x 688 mm
(19.4 x 13.5 x 27.1 “)
Weight
Weight
11.3 kg (399 ounces)
12.3 kg (434 ounces)
223 x 223 x 205 mm
(8.8 x 8.8 x 8.1 inches)
223 x 223 x 305 mm
(8.8 x 8.8 x 12.0 inches)
Print technology
Print head
Filament diameter
Layer resolution
Fused Filament Fabrication (FFF)
Swappable nozzle
2.85 mm
0.25 mm nozzle: 150 to 60 micron
0.4 mm nozzle: 200 to 20 micron
0.6 mm nozzle: 400 to 20 micron
0.8 mm nozzle: 600 to 20 micron
12.5, 12.5, 5 micron
30 to 300 mm/s
0.25 mm nozzle: up to 8 mm3/s
0.4 mm nozzle: up to 16 mm3/s
0.6 mm nozzle: up to 23 mm3/s
0.8 mm nozzle: up to 24 mm3/s
Heated glass buildplate (50° to 100° C)
PLA, ABS, CPE (Open Filament System)*
0.25, 0.4, 0.6, 0.8 mm
180° to 260° C
50° to 100° C
~ 1 minute
< 4 minutes
50 dBA
Standalone 3D printing from SD card
Manual, assisted leveling process
BUILD VOLUME
PRINTER PROPERTIES
X, Y, Z accuracy
Print head travel speed
Extrusion speed
Build plate
Supported materials
Nozzle diameter
Nozzle temperature
Build plate temperature
Nozzle heat up time
Build plate heat up time
Average operating sound
File transfer
Build plate leveling
SOFTWARE
Print preparation
Supported OS
Supported file types
Cura - Official Ultimaker Software (free)
(prepared for nozzle size selection)
Mac OS X, Windows, Linux
STL, OBJ, DAE
*Ultimaker printers can be used with third party filament. However for the best printing results we recommend you use Ultimaker Materials.
CURA SOFTWARE AND ULTIMAKER
SEAMLESSLY COMBINED
Cura prepares your model for 3D printing. For novices, it makes it easy to get great
results. For experts, there are over 200 settings to adjust to your needs. As it’s open
source, our community helps enrich it even more.
ULTIMAKER MATERIALS
OPTIMIZED PRINT QUALITY
To create the very best print quality, we worked intensively with materials suppliers to
develop unique filament formulations. And to optimize every print, Cura has material
profiles that can take care of everything or give you total freedom.
ULTIMAKER 2 GO
THE MIGHTY MINI 3D PRINTER
Small in size, but big in 3D printing abilities and
reliability, the Ultimaker 2 Go is one of the most
powerful little printers around. And with a compact
design, it’s great for makers on the go, or those just
getting started in the 3D world.
PRINTER PROPERTIES
Print technology
Print head
Build volume
Filament diameter
Layer resolution
X, Y, Z accuracy
Print head travel speed
Extrusion speed
Build plate
Supported materials
Nozzle diameter
Nozzle temperature
Nozzle heat up time
Average operating sound
File transfer
Build plate leveling
Fused Filament Fabrication (FFF)
Swappable nozzle
120 x 120 x 115 mm
2.85 mm
0.4 mm nozzle: 200 to 20 micron
12.5, 12.5, 5 micron
30 to 300 mm/s
0.4 mm nozzle: up to 16 mm3/s
Glass buildplate with blue tape
PLA
0.4 mm
180° to 260° C
~ 1 minute
49 dBA
Standalone 3D printing from SD card
Manual, assisted leveling process
PHYSICAL DIMENSIONS
Dimensions
Nett weight
Shipping weight
258 x 250 x 287.5 mm
6.2 kg
14.0 kg
SOFTWARE
Print preparation
Supported OS
Supported file types
Cura - Official Ultimaker Software (free)
Mac OS X, Windows, Linux
STL, OBJ, DAE, AMF
ULTIMAKER ORIGINAL+
MAKE IT YOURS
Hackable without limits, our original open-source
3D printer gives you endless freedom to modify it to
your heart’s content. With this DIY kit, you’ll have the
most reliable, accurate and fun 3D printer around.
PRINTER PROPERTIES
Print technology
Print head
Build volume
Filament diameter
Layer resolution
X, Y, Z accuracy
Print head travel speed
Extrusion speed
Build plate
Supported materials
Nozzle diameter
Nozzle temperature
Build plate temperature
Nozzle heat up time
Build plate heat up time
Average operating sound
File transfer
Build plate leveling
Fused Filament Fabrication (FFF)
Swappable nozzle
210 x 210 x 205 mm
2.85 mm
0.4 mm nozzle: 200 to 20 micron
12.5, 12.5, 5 micron
30 to 300 mm/s
0.4 mm nozzle: up to 16 mm3/s
Heated glass buildplate (50° to 100° C)
PLA, ABS, CPE
0.4 mm
180° to 260° C
50° to 100° C
~ 1 minute
< 4 minutes
49 dBA
Standalone 3D printing from SD card
Manual, assisted leveling process
PHYSICAL DIMENSIONS
Dimensions
Nett weight
Shipping weight
357 x 342 x 388 mm
12.3 kg
19.5 kg
SOFTWARE
Print preparation
Supported OS
Supported file types
Cura - Official Ultimaker Software (free)
Mac OS X, Windows, Linux
STL, OBJ, DAE
ULTIMAKER
www.ultimaker.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement