COLOR TFT LCD MONITOR
User Manual
LILLIPUT DIRECT
IMPORTANT SAFETY INSTRUCTIONS:
Please read manual before using this product.
Please keep manual for future reference.
Please read the cautions to prevent possible danger and loss of property
Please enjoy the benefits of convenience, safety, and space-saving from this TFT LCD monitor in different ways.
FEATURES:
This product employs integrate circuits, lower power consumption, and lower radiation emission. It has fashion designed appearance and good portability.
AV, HDMI, YPbPr & WHDI Input, to connect with Full HD Video
Camera.
LED backlight display, support 1920×1080 HD resolution.
High contrast & dizzy-proof monitor with flexible folding sun shade cover, to see clearly under sunshine.
DC 7-24V wide range voltage.
CAUTIONS：
1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole. adjustment must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use, or thunder weather.
YP-01140524
* Option for product model with"/P" only.
1
Contents
1.
PRODUCT DESCRIPTION ................................................................................ 3
2.
WIRELESS HD TRANSMITTER ....................................................................... 5
3.
WHDI REMOTE CONTROL ............................................................................... 5
4.
WHDI FUNCTION ................................................................................................ 6
5.
INSTALLATION OF SUNSHADE COVER AND BATTERY PLATE ........... 8
6.
DV BATTERY MOUNT PLATE .......................................................................... 9
7.
SETTING MENU ................................................................................................ 10
8.
ACCESSORIES ................................................................................................. 13
9.
PARAMETERS ................................................................................................... 13
10. TROUBLE SHOOTING ..................................................................................... 14
LILLIPUT DIRECT
* Option for product model with"/P" only.
2
1. PRODUCT DESCRIPTION
1．Speaker.
2．POWER：ON/OFF (Light turns to red when power on).
3．VIDEO: Indicator lights up when signal switch to video state.
4．YPbPr: Indicator lights up when signal switch to YPbPr state.
5．HDMI: Indicator lights up when signal switch to HDMI state.
6．WHDI: Indicator lights up when signal switch to WHDI state.
7．F1、F2、F3、F4：User-definable buttons.
Default functions:
F1 Screen Marker F3 Check Field
F2 Aspect Ratio F4 Underscan
*F1 Peaking *F3 Exposure
*F2 False Color
*F4 Histogram
（function customized to meet your needs）
exit the menu. Rotate knob to select an option.
Default as Brightness function.
9．Knob SAT/ADJ：Press the knob to select main MENU options; rotate knob to confirm the selection and adjust parameter values.
Default as Saturation function.
10．Knob TINT：Default as Tint function.
11．Knob CONTRAST: Default as Contrast function.
* Option for product model with"/P" only.
3
1. Video signal output / input.
2. Audio signal input.
3. HDMI signal output (Optional) / input.
4. YPbPr signal input
5 Mini USB input.
(Only for program upgrades, do NOT use if non-professionals)
6. Power cable interface (connecting to the battery plate).
7. DC power input.
8. Battery power on/off switch.
9. 4-pin XLR DC power input.
Pin number Signal
①
GND
②③
……...
④
+12V
LILLIPUT DIRECT
* Option for product model with"/P" only.
4
2. WIRELESS HD TRANSMITTER
1. Code key.
2. Network indicating light.
3. Video indicator.
4. HDMI interface (connect with HDMI device).
5. Mini USB port (connect with power).
3. WHDI REMOTE CONTROL
LILLIPUT DIRECT
* Option for product model with"/P" only.
5
4. WHDI FUNCTION
1. Connect WHDI transmitter with computer or camcorder via HDMI interface, display as below.
2. Press the EXIT button on remote control to activate “Select Video
Source” function, and the transmitter matched will be displayed as follows.
LILLIPUT DIRECT
* Option for product model with"/P" only.
6
3. Press the ADD button on remote control to activate registration function as follows.
4. Then long press Code key on WHDI transmitter to activate connecting interface as follows.
5. Waiting for connection completed.
LILLIPUT DIRECT
* Option for product model with"/P" only.
7
5. INSTALLATION OF SUNSHADE
COVER AND BATTERY PLATE
Installation of sunshade cover： Disassembly of sunshade cover：
Installation steps Installation completed Disassembly steps Disassembly completed
Steps of sunshade cover on / off:
Please follow the instructions steps, or may damage the cover.
Open Step: Closed steps:
LILLIPUT DIRECT
Do not press the edge in the under of the cover, otherwise it will result in open failure.
* Option for product model with"/P" only.
8
6. DV BATTERY MOUNT PLATE
Standard mounts process
Following three types of battery plates are suitable for this device, model
F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).
MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6
DV Battery Mount Plate:
DV Battery Mount Plate Specification:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV
LILLIPUT DIRECT
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Model LP-E6 for battery of Canon DSLR:
5D Mark II/EOS7D/EOS60D ;
* Option for product model with"/P" only.
9
V-mount battery plate (optional):
Please refer to GP-L130AB type battery specifications.
Anton Bauer mount battery plate (optional):
Please refer to
GP-L130B type battery specifications.
7. SETTING MENU
Before setting the functions, please make sure the device is connected correctly.
When power on, press BRI/M/SEL knob on the device, function menus will pop-up on the screen. After confirm the option value, then
BRI / M / SEL knob to select an option.
SAT / ADJ knob to select the main menu, adjusting option values and confirm the selection.
* Option for product model with"/P" only.
10
ITEMS OPTIONS
Color Temp 6500ºK/7500 ºK/9300 ºK/User
Red Note: Only available
Green under “User” mode to
Blue meet the color value you need.
Check Field OFF，MONO，Red, Green and
Blue
Aspect Ratio Full Screen,4:3 and 16:9
Pixel-to-Pixel ON/OFF
Camera
H/V delay
480P
(5DII Mode)
/1080I
(5DIII Mode)
OFF,H&V Delay, V Delay and H
Delay
ITEMS OPTIONS
Center Marker ON/OFF
Screen Markers OFF,
95%,93%,90%,88%,85% and80%
ITEMS OPTIONS
Language English /Chinese
PIP Small, Medium, Large, PBP, POP
In small, medium and large
LILLIPUT DIRECT
In PBP and POP interface can adjust the source and swap.
Input Format
OSD
5s、10s、15s
LOGO ON/ OFF
Freeze Input ON/ OFF
Image Flip
*Peaking
ON/ OFF
Mono/ Color
* Option for product model with"/P" only.
11
Assistant
Func.
Manufacturer
Default
ISP
Manual/Auto
OK/Cancel(Reverse the SAT / A
DJ knob to select "OK")
For program upgrades (Please reboot your computer if press accidentally!)
Function of buttons and knobs can be customized by users’ needs.
Functions of F1-F4 buttons can also be customized:
·Aspect Ratio ·Check Field ·Freeze Input ·Center Marker
·Underscan ·H/V delay ·Color Bar ·Screen Marker
·Zoom ·Camera ·Pixel-to-Pixel ·PIP
·*Peaking ·*False Color ·*Exposure ·*Histogram.
Functions of R1-R4 buttons can also be customized:
·Contrast ·Brightness ·Saturation
·Tint ·Volume ·Sharpness
LILLIPUT DIRECT
* Option for product model with"/P" only.
12
8. ACCESSORIES
Standard accessories:
1. Flexible Folding Sun Shade Cover 1 piece
2.WHDI Accessories 1 pair
3. Battery Plate
(2 out of 4)
2 pieces
3. Manual 1 copy
4. HDMI Type A-C 1 piece
5. DC Adapter 1 piece
Optional accessories
1. Anton Bauer Mount Battery Plate 1piece
2. V-mount Battery Plate 1piece
3. Shoe Mount (for camera only) 1piece
4. Li-ion Battery 1piece
9. PARAMETERS
Panel Size
Resolution
Contrast
Viewing Angle
7’’ TFT LCD
1024×600
800:1
160°/ 150°(H/V)
Operating Temperature -20℃~60℃
Storage Temperature -30℃~70℃
Power Consumption
≤12W
Size:(LWD) 194.5×150×38.5mm/48.5mm(with closed) /158.5mm (with cover open)
Weight 560g / 720g (with cover) cover
* Option for product model with"/P" only.
13
10. TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup.
2. Power on but no pictures:
Check whether the cables of Video, HDMI, YPbPr and WHDI are correctly connected. Please use the standard power adapter coming with the product package. Improper power input may cause the device.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected. Broken or loose pins of the cables may cause a bad connection.
4. When on the picture shows size error:
Press
“MENU→ →Underscan” to zoom in/out pictures automatically
When receiving HDMI /WHDI signals.
5. Other problems:
Please press “MENU” button and choose “
→OK”
→Manufacturer Default
6. According to the ISP, the machine cannot function properly
：
ISP for program upgrades, non-professionals do not use. Please reboot your computer if press accidentally!
It is normal to see some bright lines appear on the screen when turn off the device.
Note: due to constant effort to improve products and product features, specifications may change without notice.
LILLIPUT DIRECT
14
LILLIPUT DIRECT
15
