instruction booklet
INSTRUCTION
BOOKLET
Recipe
Booklet
Reverse Side
12-Cup Cuisinart Elite Collection™ Food Processor
FP-12 Series
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
Recommended maximum work bowl capacities
FOOD
CAPACITY
12-CUP WORKBOWL
CAPACITY
4-CUP WORKBOWL
Sliced or shredded fruit, vegetables or cheese
12 cups
N/A
Chopped fruit, vegetables or cheese
9 cups
3 cups
Puréed fruit, vegetables or cheese
10 cups cooked
6 cups puréed
3 cups cooked
1½ cups puréed
Chopped or puréed meat, fish, seafood
2 pounds
½ pound
Thin liquid* (e.g. dressing, soups, etc.)
8 cups
3 cups
Cake batter
One 9-inch cheesecake
Two 8-inch homemade layers
(1 box 18.5 oz. cake mix)
N/A
Cookie dough
6 dozen (based on average chocolate
chip cookie recipe)
N/A
White bread dough
5 cups flour
N/A
Whole wheat bread dough
3 cups flour
N/A
Nuts for nut butter
5 cups
1½ cups
* When processing egg-based liquids, like a custard base for quiche, reduce maximum capacity by 2 cups.
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart Elite
Collection™ 12-Cup Food Processor and the
accessories for it:
12- and 4-cup work bowls, work bowl cover,
large and small metal chopping/mixing blades,
dough blade, adjustable slicing disc, reversible
shredding disc, stem adapter, large and small
pushers, spatula, instruction/recipe book and
How-to DVD.
CAUTION:
THE CUTTING TOOLS HAVE VERY SHARP
EDGES. To avoid injury when unpacking the
parts, please follow these instructions.
1.Place the box on a low table or on the floor
next to the kitchen counter or table where
you intend to keep the food processor.
Be sure the box is right side up.
2.Open top flaps and remove the cardboard
insert and the instructional material and
How-to DVD. You will see a rectangular
block of plastic foam that holds the
processor parts, each fitted into cavity in
the foam.
4.The housing base with 12- and 4-cup work
bowls and small metal chopping/mixing
blade are at the bottom of the box.
CAREFULLY REMOVE SMALL METAL
CHOPPING/MIXING BLADE BY
GRASPING THE CENTER WHITE HUB
AND LIFTING IT STRAIGHT UP. NEVER
TOUCH THE BLADE, AS IT IS RAZOR
SHARP. Then pull out the stem adaptor to
the motor shaft.
5.Remove the base and bowls together by
grasping the handle and lifting straight up.
Do not rotate the bowl clockwise on the
base. This will cause the bowls to separate
from the base.
6.Place the food processor on the counter or
table. Read the instructions thoroughly
before using the machine.
7.Save the shipping cartons and plastic foam
blocks. You will find them very useful if you
need to repack the processor for moving or
other shipment.
Please watch the enclosed How-to DVD
before using the food processor.
NOTE: Remember to return your completed
product registration card with all information
carefully filled out.
The spatula (A) and dough blade (B) are in
cavities at one short side of the foam block.
Remove them first.
The bowl cover (C) and large/small pushers
(D) are in cavities at center of foam block.
Grasp the edge of the bowl cover and lift it
straight up, removing it next. Lift out the
large/small pushers from its space under
the bowl cover on the foam block.
The adjustable slicing disc (E) and
reversible shredding disc (F) are on either
long side of the foam block. Slide them out
of their grooves WITH GREAT CARE. THE
BLADES ARE VERY SHARP.
Remove the large metal chopping/mixing
blade (G) from the foam block.
CAREFULLY REMOVE IT BY GRASPING
THE CENTER WHITE HUB AND LIFTING
IT STRAIGHT UP. NEVER TOUCH THE
BLADE, AS IT IS RAZOR SHARP.
3.Lift out the plastic foam block.
3
IMPORTANT
SAFEGUARDS
Always follow these safety precautions when
using this appliance.
Getting Ready
1. Read all instructions.
2. Blades and discs are sharp. Handle them
carefully.
3. Always unplug from outlet when not in
use, before putting on or taking off parts,
before removing food and before
cleaning. To unplug, grasp plug and pull
from electrical outlet. Never pull cord.
4. Do not use outdoors.
5. Do not let cord hang over edge of table or
counter, or touch hot surfaces.
6. Do not operate any appliance with
damaged cord or plug, or after appliance
has been dropped or damaged in any way.
Return appliance to the nearest authorized
service facility for examination, repair or
electrical or mechanical adjustment.
Operation
1. Keep hands as well as spatulas and other
utensils away from moving blades or discs
while processing food, to prevent the
possibility of severe personal injury or
damage to food processor. A plastic
scraper may be used, but only when the
food processor motor is stopped.
2. Avoid contact with moving parts. Never
push food down by hand when slicing or
shredding. Always use pusher.
3. Make sure motor has completely stopped
before removing cover. (If machine does
not stop within 4 seconds after you remove
the pusher assembly, call 1-800-762-0190
for assistance. Do not use the machine.)
4. Never store any blade or disc on motor
shaft. To reduce the risk of injury, no blade
or disc should be placed on the shaft
except when the bowl is properly locked in
place and the processor is in use. Store
blades and discs, as you would sharp
knives, out of reach of children.
5. Be sure cover and feed tube are securely
locked in place before operating food
processor.
6. Never try to override or tamper with cover
interlock mechanism.
4
Cleaning
To protect against risk of electrical shock, do
not put base in water or other liquid.
General
1. This appliance should not be used by or
near children or individuals with certain
disabilities.
2. Do not operate this, or any other motordriven appliance, while under the influence
of alcohol or other substances that affect
your reaction time or perception.
3. This food processor is UL listed for
household use. Use it only for food
preparation as described in the
accompanying recipe and instruction book.
Do not use this appliance outside of its
intended use.
4. The use of attachments not recommended
or sold by Cuisinart may cause fire,
electrical shock or personal injury, or
damage to your food processor.
5. To avoid possible malfunction of work bowl
switch, never store processor with pusher
assembly in locked position.
6. Maximum rating of 6.5 amperes is based
on attachment that draws greatest current.
Other recommended attachments may
draw significantly less current.
NOTICE: If your food processor has a plastic
case, it has a polarized plug (one blade is wider
than the other). As a safety feature, this plug will
fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
Warning: Risk of fire
or electric shock
CONTENTS
The lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of un-insulated dangerous
voltage within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of fire or electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
SPECIAL CORD SET
INSTRUCTIONS
Important Unpacking Instructions................. 3
Important Safeguards................................... 4
Introduction................................................... 5
Features and Benefits................................... 6
Assembly Instructions, Diagram....................8
Machine Controls.......................................... 9
Work Bowls................................................... 9
Machine Functions........................................ 9
User Guide and Capacity Chart.................. 11
Cleaning and Storage................................. 15
For Your Safety............................................ 15
Technical Data..............................................15
Troubleshooting........................................... 16
Warranty Information................................... 17
INTRODUCTION
The food processor that re-invented the art of
food preparation once again leads the way in
innovation! Congratulations on your purchase of
the Cuisinart Elite Collection™ 12-Cup Food
Processor – the next generation in culinary
excellence.
NOTICE
If you have a die-cast metal
unit, for your protection, it is
equipped with a 3-conductor
cord set that has a molded
3-prong grounding-type plug,
and should be used in
combination with a properly
connected grounding-type
outlet as shown in Figure A.
If a grounding-type outlet is
not available, an adapter,
shown in Figure B, may be
obtained so that a 2-slot wall outlet can be used
with a 3-prong plug. As shown in Figure C, the
adapter must be grounded by attaching its
grounding lug under the screw of the outlet
cover plate.
Superbly designed for high performance and
ease of use, the Cuisinart Elite Collection™
12-Cup has the power, capacity, versatility,
precision, and accessories to handle any task.
From the two nested and sealed bowls to the
adjustable slicing disc and reversible shredding
disc, these incredible features create multiple
food processors in one!
All of these pioneering, creative elements come
together with Cuisinart’s leading reputation to
give you the Elite Collection™ 12-Cup Food
Processor – the finest food prep appliance for
today’s modern kitchen.
NOTE: Do not remove the grounding prong.
CAUTION: Before using an adapter,
it must be determined that the outlet
cover plate screw is properly
grounded. If in doubt, consult a
licensed electrician. Never use an
adapter unless you are sure it is
properly grounded.
Note: Use of an adapter is not
permitted in Canada.
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY
5
FEATURES AND BENEFITS
1. Housing Base and Motor
With a vertically projecting motor shaft,
this powerful base will process through a
variety of recipes with a 1000 watt peak
power induction motor.
2.Touchpad Control Panel
These easy to clean, electronically
controlled buttons, feature On, Off and
Pulse options, for every food processing
function. The contemporary, blue LED light
will indicate when the unit is powered on.
3.Work Bowls
Designed with maximum versatility, the
work bowl should be selected based on
task appropriateness.
These nested bowls feature SealTight ™
technology, which maximizes each bowl’s
processing capacity, ensures safe handling,
and keeps all the ingredients contained in
the bowl you’re using! The bowls also
include a locking feature to prevent them
from coming out of position when pouring,
and finger recesses (a) for user-friendliness.
The large and small work bowls are all
made of durable polycarbonate material
with convenient measurement markings (b)
and pour spouts (c).
4.Work Bowl Cover with Feed Tube
Work bowl cover with SealTight™ Advantage
feature allows for maximum bowl capacity
during processing and pouring. To remove
the work bowl cover, push in the release
buttons (a) on either side of the handle
interlock (b).
The Supreme® Wide-Mouth feed tube (c)
accommodates larger ingredients and saves
precutting time.
5.Pusher Assembly
Secured with a snap-fit, the small pusher
(a) inside the large pusher (b) allows you to
accommodate ingredients of all sizes. The
large pusher lock (c), located on the handle,
enables it to be pulled out to lock and
pushed in to unlock – this feature should be
used when processing heavy loads.
6.Small Chopping/Mixing Blade
This small stainless steel blade will chop or
mix anything in your small work bowl and
also features the BladeLock System.
6
7.Large Chopping/Mixing Blade
Stainless steel in construction, this heavyduty blade will process a variety of food in
your large work bowl. The BladeLock System
enables the blade to stay in place to prevent
leaking, while providing optimal pouring.
8.Dough Blade
Designed for superb results, this blade will
knead through all types of dough. The
dough blade can be used only in the large
bowl.
9.Adjustable Slicing Disc
The versatile 6-in-1 disc allows for thin
to thick slices with 1 to 6mm indicators.
This disc may be used only in the large
bowl.
10.Reversible Shredding Disc
Provides the option of either fine or
medium shredding for optimal results.
This disc may be used only in the large
bowl.
11.Stem Adapter
This user-friendly tool easily attaches to
either disc or small chopping/mixing blade
to engage the motor shaft.
12.Spatula
Uniquely designed for use with either
work bowl.
13.Cord Storage (not shown)
Keeps countertops safe and clean by
conveniently wrapping excess cord under
the unit.
5a
6
5b
7
5c
8
4c
9
4a
4b
3a
3c
10
3b
3
11
2
12
1
7
ASSEMBLY
INSTRUCTIONS
Before first use
Before using your Cuisinart Elite Collection™
12-Cup Food Processor for the first time, wash
the work bowls, work bowl cover, pusher
assembly, blades, discs, and spatula (see
Cleaning Instructions on page 15).
1.Place the food processor base on a dry,
level countertop with the controls facing
toward you. Do not plug the unit in until it
is fully assembled.
2.With the large bowl on the base, use
the handle to turn the work bowl
counterclockwise to lock it onto the
housing base.
To use the small bowl, place your thumbs
in the finger recesses and align the pour
spout facing opposite the handle. Push
down to lock.
Large Bowl
& accessories
Small Bowl
& accessories
Blade Operation
The BladeLock feature is designed to
keep the blade in place during processing,
pouring, lifting, and handling tasks – but is
not permanently attached. Handle with
care. Always check to be sure the blade
is securely locked before turning the
bowl upside down.
Note: The chopping/mixing blades
should not be removed with liquid
contents above the hub of the blade in
the bowls, as this will defeat the
SealTight™ system.
Large Blade Operation
3.With your large work bowl assembled on
the base, grasp the large chopping/mixing
blade by its hub, align it over the center of
the bowl, place it onto the shaft and turn it
until it slides into place. Firmly push down
to lock. Always check to be sure the
blade is securely locked before turning
the bowl upside down. (To remove, first
take the bowl off the base and put it on a
flat surface. Rest the heel of your hand on
the rim of the bowl and pull up gently and
carefully.)
Dough Blade Operation
4.For use with the large bowl. Carefully lift
and place the dough blade on the shaft
and turn it until it slides into place.
Small Blade Operation
5.With both work bowls assembled on the
base, position the stem adapter over the
center of the bowls, place it on the shaft
and turn it until it slides into place. Grasp
the small chopping/mixing blade by its hub,
place it over the stem adapter, turning it
until it slides into place, and push down
firmly to lock. Always check to be sure
the blade is securely locked before
turning the bowl upside down. (To
remove, first take the bowl off the base
and put it on a flat surface. Rest the heel of
your hand on the rim of the bowl and pull
up gently and carefully.)
Disc Operation
6.When using your large bowl only, position
the stem adapter over the center of the
bowl, place it on the shaft and turn it until it
slides into place. If using the adjustable
slicing disc, use the rotating hub and
indicator markings to select slicing
thickness. Using the finger holes, align and
insert the disc over the stem adapter.
8
If using the reversible shredding disc,
determine whether the fine or medium side
will be used and use the plastic hub to
twist into position on the stem adapter. The
finger holes may be used for removal of
this disc.
Cover Operation
7.Place the work bowl
cover onto the work bowl
by positioning it directly
over the bowls, and push
down on the front and
back to lock into place.
Press down here
Another way to put the
cover on is by latching
the back on first and then
pushing down on the
front to lock into place.
Be sure both front and
back locks are fully
engaged.
To remove the cover,
push in both sides of the
release button (located
on the cover interlock)
and lift up to remove.
Note: The work bowl cover fits, locks
and seals on the large bowl with any
nested bowl combination. The work
bowl cover will become easier to engage
with repeated use.
8.Align pusher assembly and activating rod
with the feed tube opening on the work
bowl cover and slide it down completely.
9.Plug the food processor into a proper
electrical outlet. It is now ready for use.
Note: The bowl, lid and pushers must be
securely in place for the unit to operate.
MACHINE Controls
On Button
The On control is a continuous button that
allows the machine to run until Off is selected.
1. Properly assemble and engage the
machine.
2. Add ingredients to the work bowl, either
through the feed tube or directly into the
bowl.
3. Press the On button. The blue LED light will
illuminate and the motor will start.
4. Press the Off button when finished.
PULSE Button
The Pulse control is a momentary button that
allows the machine to run only while it is being
pressed. This capability provides more accurate
control of the duration and frequency of
processing. Unless otherwise specified, a pulse
is about one second.
1. With the machine properly assembled and
engaged, and ingredients in the work bowl,
press the Pulse button repeatedly as
needed. The blue LED On light will be
illuminated upon activation.
Work Bowls
Two nested work bowls are provided for a very
versatile processing experience. We recommend
using the work bowls in a manner that will
optimize efficiency. For example, if your recipe
requires using both bowls, begin with the small
bowl to minimize cleaning. This way the small
bowl can serve as a prep bowl to reserve chopped
ingredients for a recipe. A great example of this
would be the Cherry Crumb Muffins recipe on
page 18.
Note that the bowls lock into place to pour while
nested. The convenient finger recesses can be
used to remove the small bowl with ingredients,
or the bowl can remain nested during pouring or
food removal.
Chopping certain foods may scratch or cloud the
work bowl, this will not affect the functionality of
your work bowl.
MACHINE Functions
Chopping
(using the Chopping Blade)
• For raw ingredients: peel, core and/or remove
seeds and pits. Food should be cut into even,
½ to 1-inch pieces. Foods cut into same size
pieces produce the most even results.
• Pulse food in 1-second increments to chop.
For the finest chop, either hold the pulse down
or press on to run the machine continuously.
Watch ingredients closely to achieve desired
consistency and scrape the work bowl as
necessary.
Puréeing
(using the Chopping Blade)
• To purée fresh fruits or cooked fruits/
vegetables: ingredients should be cut into
1-inch pieces; a smooth purée is achieved
easiest when all the pieces are equal in size.
Pulse to initially chop and then process on
until food is puréed; scrape the work bowl as
9
necessary. Do not use this method to purée
cooked white potatoes. (see Mashed Potato
recipe on page 48.)
• To purée solids for a soup or sauce: strain
the solids from the liquid and process the
solids alone. Add cooking liquid and process
as needed.
Kneading
(using the Dough Blade or
the Metal Chopping Blade)
• The dough blade is engineered to knead
through yeast dough, while the metal
chopping blade is ideal for pastry doughs.
• The pusher lock is recommended to be in the
locked position when kneading dough to avoid
it from moving around – some vibration is still
normal.
• Dough kneading should be done in the large
bowl only.
Slicing (using the Adjustable
Slicing Disc)
• Always pack food in the feed tube evenly
to slice. For smaller amounts of food, use the
smaller feed tube. For cheese slicing, always
use the large feed tube. The food will dictate
the amount of pressure: Use light pressure for
soft foods, medium pressure for medium
foods, and firm pressure for harder foods.
Always process with even pressure.
• For julienne or matchstick cuts: Place food
horizontally in the feed tube and process with
even pressure to create long, plank-like slices.
Replace stack of slices in feed tube vertically
and process again using even pressure.
• For round fruits or vegetables: Remove a thick
slice on the bottom of the food so that it sits
upright in the feed tube. If food does not fit in
the feed tube, cut in half or quarters to fit.
Process with even pressure.
• For small ingredients, like mushrooms,
radishes or strawberries: Trim the ends so the
food sits upright in the feed tube. Take
advantage of the smaller feed tube if
appropriate.
• When slicing cheese, be sure that the cheese
is well chilled before slicing.
10
Shredding (using the Reversible
Shredding Disc)
• Always pack food in the feed tube evenly to
shred. For smaller amounts of food, use the
smaller feed tube. For cheese shredding,
always use the large feed tube. The food will
dictate the amount of pressure: Use light
pressure for soft foods, medium pressure for
medium foods and firm pressure for harder
foods. Always process with even pressure.
• To shred leafy vegetables like lettuce or
spinach: Roll leaves together and stand up
in feed tube. Process with even pressure.
• When shredding cheese, be sure that the
cheese is well chilled before shredding.
USER GUIDE & CAPACITY CHART
FOOD
TOOL
PROCESS
YIELD
DIRECTIONS
FRUITS
Metal Blade
Chop
1 pound = 3 cups
Metal Blade
Purée
1 pound = 3 cups
Slicing Disc
Shredding Disc
Slice
Shred
1 apple = ¾ cup
1 apple = ¾ cup
Cut into 1-inch pieces; pulse to chop – process for
fine chop.
Process to purée cooked and peeled apples for
applesauce.
Medium pressure
Medium pressure
Avocados
Metal Blade
Metal Blade
Chop
Purée
1 medium = 1 cup
1 medium = 1 cup
Cut into 1-inch pieces; pulse to chop.
Cut into 1-inch pieces; process to purée.
Bananas
Metal Blade
Slicing Disc
Purée
Slice
3 medium = 1 cup
1 pound = 2 cups
Process to purée ripe bananas.
Light pressure for firm bananas.
Berries
Metal Blade
Purée
Process until puréed. Strain to remove seeds. Thaw
frozen berries before processing.
Slicing Disc
Slice
1 pint fresh = 2 cups; 10
ounce-bag frozen = 1½
cups
1 pint = 2 cups
Coconuts
Metal Blade
Chop
1 medium = 4 cups
Cut flesh into 1-inch pieces; pulse to chop. Process to
finely chop.
Shredding Disc
Shred
1 medium = 4 cups
Cut flesh to fit feed tube, medium pressure.
Kiwis
Slicing Disc
Slice
2 kiwis = ¾ cup
Chill and peel; light pressure.
Mangoes
Metal Blade
Metal Blade
Chop
Purée
1 medium = ¾ to 1 cup
1 medium = ¾ to 1 cup
Cut into 1-inch pieces; pulse to chop.
Cut into 1-inch pieces; process to purée.
Peaches/
Nectarines
Metal Blade
Metal Blade
Slicing Disc
Chop
Purée
Slice
1 lb = 2 to 2½ cups
1 lb = 2 to 2½ cups
1 lb = 2 to 2½ cups
Cut into 1-inch pieces; pulse to chop.
Cut into 1-inch pieces; peel and process to purée.
Remove pit, light pressure.
Citrus Fruits;
Lemons, Limes &
Oranges
Metal Blade
Chop
For medium fruit:
1 lemon = 2 to 3 teaspoons
zest; 1 lime = 1 tsp zest;
Zest: use vegetable peeler to remove rind; process. For
the finest chopped zest, add small amount of sugar to
chop with zest
Slicing Disc
Slice
1 orange = 1½ tablespoons
zest
Trim ends; place upright in feed tube. Medium pressure.
Dried (sticky)
Fruits
Metal Blade
Chop
1 pound = 2½ cups
Chill fruit. Add some flour from recipe to work bowl.
Process using short pulses until desired consistency.
VEGETABLES
Metal Blade
Slicing Disc
Purée
Slice
1 cup = ½ cup purée
1 pound = 3 cups
Process to purée cooked beans.
“French-cut”: trim beans; stack in feed tube horizontally.
Light pressure.
Broccoli/
Cauliflower
Metal Blade
Metal Blade
Slicing Disc
Shredding Disc
Chop
Purée
Slice
Shred
1 pound raw = 2 cups
1 pound cooked = 1 cup
Broccoli stems only
Broccoli stems only
Cut into 1-inch pieces; pulse to chop.
Cut into 1-inch pieces; process to purée.
Peel and trim stems. Medium pressure.
Peel and trim stems. Medium pressure.
Cabbage
Metal Blade
Chop
2 pounds = 8 cups
Slicing Disc
Slice
2 pounds = 8 cups
Shredding Disc
Shred
2 pounds = 8 cups
Cut into 1-inch pieces; pulse to chop to desired
consistency.
Cut in wedges to fit feed tube; remove center core. Light
to no pressure. Use slicing disc for coleslaw.
Use shredding disc for extra-fine needs.
Metal Blade
Chop
1 pound (6 med) = 3 cups
Metal Blade
Purée
Slicing Disc
Slice
2 med cooked = ½ cup
purée
1 pound (6 med) = 3 cups
Shredding Disc
Shred
1 pound (6 med) = 2½ cups
Apples
Beans - Green,
Wax
Carrots
Strawberries: remove stems; stack berries on their side.
Medium pressure.
Cut into 1-inch pieces; pulse to chop to desired
consistency.
Process to purée.
Small rounds: trim; place upright in feed tube. Long
slices: trim; place horizontally in feed tube. Medium to
firm pressure.
Small shreds: trim; place upright in feed tube. Long
shreds: trim; place horizontally in feed tube. Medium to
firm pressure.
11
FOOD
TOOL
PROCESS
YIELD
DIRECTIONS
Celery
Metal Blade
Chop
2 medium stalks = ½ cup
Slicing Disc
Slice
2 medium stalks = ½ cup
Cut into 1 inch pieces; pulse to chop to desired
consistency.
Trim; place upright in feed tube. Medium pressure.
Metal Blade
Chop
1 medium = 1½ cups
Cut into 1-inch pieces; pulse to chop.
Slicing Disc
Slice
1 medium = 1½ cups
Rounds: trim; place upright in feed tube. Medium
pressure. Long slices: trim; place horizontally in feed
tube. Medium pressure.
Shredding Disc
Shred
1 medium = 1½ cups
Shreds: trim; place upright in feed tube. Medium
pressure. Long shreds: trim; place horizontally in feed
tube. Medium pressure.
Garlic
Metal Blade
Chop
1 head = 12 to 16 cloves;
1 medium clove = ½
teaspoon
Peel; with machine running, drop cloves through feed
tube to finely chop.
Ginger
Metal Blade
Chop
Slicing Disc
Shredding Disc
Slice
Shred
1-inch pieces = 1
tablespoon
4 ounces = ½ cup
4 ounces = ½ cup
Peel; cut into ½-inch pieces. With machine running, drop
through feed tube to finely chop.
Peel; place upright in feed tube. Medium pressure.
Peel; place upright in feed tube. Medium pressure.
Herbs - Fresh
Metal Blade
Chop
1 cup loosely packed = ¹∕³
cup
Herbs, work bowl and blade should be clean and
completely dry. Pulse to roughly chop. Process to finely
chop. Keep up to 10 days in airtight bag in refrigerator.
Jalapeño
Metal Blade
Chop
Slicing Disc
Shred
1 medium pepper = 3
tablespoons
1 medium pepper = ¼ cup
Remove seeds and stem. With machine running, drop
halved pepper through feed tube to chop.
Remove seeds and stem. Cut stem end flat to slice into
rings; medium pressure. Place upright in feed tube for
narrow slices, horizontally for longer slices.
Metal Blade
Chop
1 pound = 2 cups
Slicing Disc
Slice
1 pound = 2 cups
Clean leeks; trim, discard dark green parts. Cut into
1-inch pieces; pulse to chop.
Clean leeks as above. Place upright in feed tube;
medium pressure. Long slices: trim; place lengthwise in
feed tube. Medium pressure.
Metal Blade
Slicing Disc
Chop
Slice
1 pound = 6 cups
1 pound = 5 cups
Cut into even pieces; pulse to chop.
Pack feed tube. Light pressure.
Shredding Disc
Shred
1 pound = 5 cups
Pack feed tube. Light pressure.
Onions
Metal Blade
Slicing Disc
Chop
Slice
1 pound = 4½ to 5 cups
1 medium = ¾ to 1 cup
Cut into 1-inch pieces; pulse to chop.
Trim; place in feed tube. Medium pressure.
Peppers - Bell
Metal Blade
Slicing Disc
Chop
Slice
1 pound = 4½ to 5 cups
1 pound = 3 cups
Cut into 1-inch pieces; pulse to chop.
Remove seeds and stem. Cut stem end flat to slice into
rings; medium pressure. Halve or quarter and place
upright in feed tube for narrow slices, horizontally for
longer slices.
Pickles
Metal Blade
Slicing Disc
Chop
Slice
1 medium = ¾ cup
1 medium = ¾ cup
Cut into 1-inch pieces; pulse to chop.
Place upright in feed tube for rounds; horizontally for
longer slices. Medium pressure.
Potatoes
Metal Blade
Metal Blade
Chop
Purée
Slicing Disc
Slice
1 pound = 3½ to 4 cups
1 cup cooked (1-inch
pieces) = ½ cup
1 pound = 3½ to 4 cups
Shredding Disc
Shred
1 pound = 3½ to 4 cups
Raw potatoes: cut into 1-inch pieces; pulse to chop.
Sweet potatoes/yams: cut into 1-inch pieces; pulse to
chop.
Trim end flat; cut to fit into feed tube. Light to medium
pressure for white potatoes; firm pressure for sweet
potatoes/yams; light pressure for partially cooked
potatoes.
Trim end flat; cut to fit into feed tube. Light to medium
pressure for white potatoes. Note: keep sliced or
shredded raw potatoes in cold water to avoid
discoloration; dry well before using. Mashed potatoes:
process cooked white potatoes through medium
shredding disc to avoid a gluey consistency.
Cucumbers
Leeks
Mushrooms
12
FOOD
TOOL
PROCESS
YIELD
DIRECTIONS
Radishes
Metal Blade
Chop
½ pound = 1½ cups
Slicing Disc
Shredding Disc
Slice
Shred
½ pound = 1½ cups
½ pound = 1½ cups
Cut into 1-inch pieces; pulse to chop. Process to finely
chop.
Trim ends; firm pressure.
Trim ends; firm pressure.
Scallions
Metal Blade
Slicing Disc
Chop
Slice
1 to 2 = ¼ cup
1 to 2 = ¼ cup
Cut into 1-inch pieces; pulse to chop.
Trim, discard dark green parts, place upright in feed
tube. Light to medium pressure. Long slices: trim; place
lengthwise in feed tube. Medium pressure.
Spinach
Metal Blade
Metal Blade
Chop
Purée
Pulse to chop.
Process to purée.
Slicing Disc
Slice
1 pound raw = 10 cups raw
1 pound raw = 1½ cups
cooked
1 pound raw = 10 cups raw
Metal Blade
Slicing Disc
Chop
Slice
1 pound = 3 cups
1 pound = 3 cups
Shredding Disc
Shred
1 pound = 3 cups
Cut into 1-inch pieces; pulse to chop.
Rounds: trim; place upright in feed tube. Long slices:
trim; place horizontally in feed tube. Medium pressure.
Shredding: trim; place upright in feed tube. Long shreds:
trim and place horizontally in feed tube. Medium
pressure.
Metal Blade
Metal Blade
Purée
Chop
½ pound = 1 cup
¼ pound = 1 cup
Cut into 1-inch pieces. Process soft cheeses until smooth.
Cut into 1-inch pieces; pulse to chop.
Shredding Disc
Shredding Disc
Med. Shred
Fine Shred
¼ pound = 1 cup
¼ pound = 1 cup
Chill well; medium pressure. Mozzarella should be frozen
for 25 to 30 minutes before shredding.
Firm Cheeses;
Cheddar, Swiss,
Edam & Gouda
Metal Blade
Slicing Disc
Shredding Disc
Shredding Disc
Chop
Slice
Med. Shred
Fine Shred
¼ pound = 1 cup
¼ pound = 1 cup
¼ pound = 1 cup
¼ pound = 1 cup
Cut into ½- to 1-inch pieces; temperature not critical.
Chill well; light to medium pressure.
Chill well; medium pressure.
Chill well; light pressure.
Hard Cheeses;
Parmesan &
Romano
Metal Blade
Chop
¾ pound = 3 cup
Shredding Disc
Shredding Disc
Med. Shred
Fine Shred
¼ pound = 1 cup
¼ pound = 1 cup
Cut into ½- to 1 inch pieces; temperature not critical.
*Never process cheese that cannot be pierced with the
tip of a sharp knife.
Cheese should be room temperature.
Cheese should be room temperature.
Zucchini/Summer
Squash
CHEESES
Soft Cheeses;
Ricotta, Cream,
Cottage, Brie,
Blue, Fontina
Mozzarella, Bel
Paese
ADDITIONAL
FOODS
Baby Food
Metal Blade
Purée
Butter
Metal Blade
Chop
Roll leaves together and place upright in feed tube;
medium pressure.
As with all fruit and cooked vegetable purées, cut
ingredients into 1-inch pieces. Steam cooked ingredients
until completely soft. Pulse to chop, then process until
completely smooth. To ensure there are no lumps, press
mixture through a fine mesh strainer. Keeps well frozen
in ice cube trays for individual 1-ounce portions.
¼ pound (1 stick) = ½ cup
Butter should be room temperature and cut into
tablespoon-size pieces. Process, scraping bowl as
necessary. Compound butters: process flavoring
ingredients before adding butter. Pastry: cut butter into
small cubes; freeze before using.
Butter should be cold, not frozen; medium pressure.
Slicing Disc
Slice
¼ pound (1 stick) = ½ cup
Chocolate
Metal Blade
Chop
1-ounce = ¼ cup grated
Shredding Disc
Shred
1-ounce = ¼ cup grated
Cut into ½- to 1-inch pieces (or use chocolate chips).
Pulse to start, then process to desired consistency.
Texture will appear more rounded than grated.
Chill chocolate; medium to firm pressure.
Crumbs; Bread,
Cookies &
Crackers
Metal Blade
Chop
12 to 14 graham wafers =
1 cup crumbs; 1 slice bread
= ½ cup crumbs
Break up ingredients into ½- to 1-inch pieces. Process
until fine. Breadcrumbs: make from fresh, stale or
toasted bread.
13
FOOD
TOOL
PROCESS
YIELD
DIRECTIONS
Egg Whites
Metal Blade
Chop
8 egg whites = 1 cup firm
whites
Egg whites should be room temperature; add 1
teaspoon lemon juice or vinegar per white. Process in
an absolutely clean bowl for 1 to 2½ minutes until
surface develops ridges and mass of whites almost
stops moving. These egg whites should not be used in
meringues. For whipped egg whites with volume, whip
with whisk or electric mixer.
Meat, Poultry &
Fish
Metal Blade
Chop
2 pound boneless = 4 cups
Metal Blade
Purée
1 pound boneless = 2 cups
Slicing Disc
Slice
1 pound boneless = 2 cups
Cut very cold raw or cooked meat/poultry/fish into
1-inch pieces; pulse to chop. Process for a few seconds
at a time for a finer chop. Check texture often to avoid
overprocessing.
Cut very cold raw or cooked meat/poultry/fish into
1-inch pieces; pulse to chop. Process continuously until
desired texture.
Slicing cooked meat/poultry: be sure it is very cold. Use
a single chunk of meat at a time. Slicing raw meat/
poultry: cut to fit feed tube; wrap in plastic to briefly
freeze. Raw meat is ready to slice when hard to the
touch but can easily be pierced with tip of a sharp knife.
*Slicing meats works best when semi-frozen.
Milk Shakes/
Smoothies
Metal Blade
Chop/ Purée
Can make up to 16
8-ounce servings.
Milkshakes: add ice cream first; process and add milk
through feed tube. Smoothies: add fruit first, then add
the liquid while processing.
Nuts
Metal Blade
Chop
¾ pound = 3 cups
Metal Blade
Purée
¼ pound = 1 cup
Slicing Disc
Shredding Disc
Slice
Shred (fine/med.)
¼ pound = 1 cup
¼ pound = 1 cup
Pulse to chop. Hardness of nut dictates amount and
time of processing. If either flour or sugar is added to
nuts during processing, they can be processed as long
as possible without becoming butter. Coarsely chopped
nuts: 6 to 8 pulses. Finely chopped nuts: pulse 2 to 3
times, then process 20 to 30 seconds, watching
carefully for desired consistency.
Nut butter: process nuts 2 to 3 minutes, scraping bowl
as necessary. For smoothest consistency, add some oil
to nuts while processing.
Medium pressure; nuts will have a coarse texture.
Medium pressure; nuts will have a fine/medium texture.
Granulated Sugar
(to make extra
super-fine sugar)
Metal Blade
Chop
1 pound = 2 cups
Process 1 minute, or until fine.
Tofu
Metal Blade
Purée
10 ounces = ¾ cup
Drain; process 2 minutes or until smooth.
Whipping Cream
Metal Blade
Chop
1 cup = ½ cup whipped
Process well-chilled cream until cream begins to
thicken. Add sugar as desired; process continuously until
cream reaches desired consistency (about 3 to 4
minutes).
Pastry Dough
Metal Blade
Mix
Batters
Quick Bread,
Cake & Cookies
Metal Blade
Mix
First sift dry ingredients together by processing; remove
and reserve. Process the fats and sugars together and
then add any remaining liquid ingredients. Pulse in
reserved dry ingredients. Any ingredients that need to
be coarsely chopped can be added with dry ingredients.
For finely chopped ingredients, chop separately in small
work bowl and then add to batter at the end.
Yeast Dough
Breads
Metal Blade
Dough Blade
Mix
Knead
TIPS: Use ¾ cup warm liquid to proof 2¼ teaspoons
dry active yeast. Sugar/honey aids in activating yeast,
so add a small amount, about 1 teaspoon, to the warm
liquid/yeast mixture when proofing. Food processor can
handle up to 8 cups white flour for a yeast bread dough.
The dough should have a soft, pliable texture and feel
only slightly tacky.*
Sweet Dough
Breads & Coffee
Cakes
Metal Blade
Dough Blade
Mix
Knead
See TIPS above, but keep in mind that sweet doughs
will be rich and sticky and may not clean sides of bowl;
bowl may need to be scraped. Sweet doughs require
less kneading once the ingredients are mixed.*
DOUGHS
Pulse mixture until it has consistency between cornmeal
and small pebbly crumbs. Add water, 1 tablespoon at a
time; pulse until a dough forms.
Note: Use dough blade for kneading dough in the large bowl only. The small bowl may not be used for dough.
*See troubleshooting for additional direction and techniques.
14
CLEANING AND STORAGE
Keep your Cuisinart Elite Collection™ 12-Cup
Food Processor ready to use on the kitchen
counter. When not in use, leave it unplugged.
Keep the blades and discs out of the reach of
children.
All parts except the housing base are
dishwasher safe, and we recommend washing
them in the dishwasher on the top rack only.
Due to intense water heat, washing the work
bowls, cover and accessories on the bottom
rack may cause damage over time. Insert the
cover with the feed tube facing up to ensure
proper cleaning of the seal. (Note: The seal is
not removable and water will drain properly.)
Insert the work bowls and pushers upside down
for drainage. Remember to unload the
dishwasher carefully wherever you place sharp
blades and discs.
To simplify cleaning, rinse the work bowls,
cover, pusher assembly and blade or disc
immediately after use so food won’t dry on
them. Be sure to place the pushers upside
down for drainage. If food lodges in the pusher,
remove it by running water through it, or use a
bottle brush.
If you wash blades and discs by hand, do it
carefully. When handling, use the plastic hubs
on the blades and finger holes for the discs.
Avoid leaving them in soapy water where they
may disappear from sight. To clean the metal
blade, fill the work bowl with soapy water, hold
the blade by its plastic center and move it
rapidly up and down on the center shaft of the
bowl. Use of a spray attachment is also
effective. If necessary, use a brush.
The work bowls are made of polycarbonate
plastic, which is shatter resistant and heat
resistant. They should not be placed in a
microwave oven, as the aperture at the front of
the pusher houses the metal rod that activates
the motor.
The housing base may be wiped clean with a
soapy, non-abrasive material. Be sure to dry
once clean.
Four rubber feet on the underside keep the base
from moving on most work surfaces when the
machine is processing heavy loads. If the feet
leave spots on the counter, spray them with a
spot remover and wipe with a damp sponge. If
any trace of the spot remains, repeat the
procedure and wipe the area with a damp
sponge and nonabrasive cleaning powder.
IMPORTANT: Never store any blade or disc on
the motor shaft. No blade or disc should be
placed on the shaft except when the processor
is about to be used.
FOR YOUR SAFETY
Like all powerful electrical appliances, a food
processor should be handled with care. Follow
these guidelines to protect yourself and your
family from misuse that could cause injury.
Handle and store metal blades and discs
carefully. Their cutting edges are very sharp.
Always place the stem adapter on the motor
shaft before assembling the discs.
Never put blades or discs on the motor shaft
until the work bowl is locked in place.
Always be sure that the blade or disc is down
on motor shaft as far as it will go.
Always insert chopping blade and dough blade
in the work bowl before putting ingredients in
bowl.
When slicing or shredding food, always use the
pusher. Never put your fingers or spatula into
feed tube.
Always wait for the blade or disc to stop
spinning before you remove the pusher
assembly or cover from the work bowl.
Always unplug the unit before removing food,
cleaning, or putting on or taking off parts.
Always remove work bowl from base of machine
before you remove chopping blade or dough
blade.
TECHNICAL DATA
The motor in your food processor operates on a
standard line operating current. The appropriate
voltage and frequency for your machine are
shown on a label on the bottom of the base.
An automatic, temperature-controlled circuit
breaker in the motor ensures complete
protection against motor burnout. If the
processor runs for an exceptionally long time
when chopping, mixing or kneading a thick or
heavy mixture in successive batches, the motor
may overheat. If this happens, the processor will
stop. Turn it off and wait for the motor to cool
before proceeding. It will usually cool within 10
minutes. In extreme cases, it could take an hour.
Safety switches prevent the machine from
operating when the work bowl or the cover is
not locked into position. The motor stops within
seconds when the motor is turned off, and when
15
the pusher assembly is removed, a fast-stop
circuit also enables the motor to stop within
seconds.
Cuisinart offers a Limited Three-Year Warranty
on the entire machine.
TroubleShooting
Food Processing
1.Problem: The food is unevenly processed
Solution:
• The ingredients should be cut evenly
into ½- to 1-inch pieces before
processing.
• Process in batches to avoid
overloading.
2.Problem: Slices are uneven or slanted
Solution:
• Place evenly cut food into the feed tube.
• Apply even pressure on the pusher.
3.Problem: Food falls over in feed tube
Solution:
• Large feed tube must be packed full
for best results. If processing smaller
quantities, use the small feed tube.
4.Problem: Some food remains on top
of the disc.
Solution:
• It is normal for small pieces to remain;
cut remaining bits by hand and add to
processed ingredients.
have mixed, then add remaining liquid
slowly (do not turn off the machine). Pour
liquid onto dough as it passes under feed
tube opening; do not pour liquid directly
onto bottom of the work bowl.
3. Problem: Blade rises in work bowl
Solution:
• Excessively sticky dough can cause blade
to rise. Reinsert blade and immediately
add 2 tablespoons of flour through the
feed tube while the machine is running.
4. Problem: The large pusher moves when
processing dough or other heavy loads.
Solution:
• The pusher lock feature, located above
the handle, should be pulled out (some
vibration is normal).
5. Problem: Dough doesn’t clean inside of
the work bowl.
Solution:
• Amount of dough may exceed maximum
capacity of your food processor. Remove
half and process in two batches.
• Dough may be too dry (see number 9).
• Dough may be too wet (see number 10).
6. Problem: Nub of dough forms on top of
blade and does not become uniformly
kneaded.
Dough Processing
Solution:
• Stop machine, carefully remove dough,
divide it into 3 pieces and redistribute
them evenly in the work bowl.
1.Problem: Motor slows down.
7. Problem: Dough feels tough after kneading
Solution:
• Amount of dough may exceed maximum
capacity of your food processor. Remove
half and process in two batches.
• Dough may be too wet (see number 10).
If motor speeds up, continue processing.
If not, add more flour, 1 tablespoon at a
time until the motor speeds up. Process
until dough cleans the side of the work
bowl.
Solution:
• Divide dough into 2 or 3 pieces and
redistribute evenly in bowl. Process 10
seconds or until uniformly soft and pliable.
2.Problem: Blade doesn’t incorporate
ingredients.
Solution:
• Always start the food processor before
adding liquid. Add liquid in a slow, steady
stream, allowing the dry ingredients to
absorb it. If too much liquid is added,
wait until ingredients in the work bowl
16
8. Problem: Dough is too dry.
Solution:
• While machine is running, add water, 1
tablespoon at a time until dough cleans
the inside of the bowl.
9.Problem: Dough is too wet.
Solution:
• While machine is running, add flour, 1
tablespoon at a time until dough cleans
the inside of the bowl.
Technical
1. Problem: The motor does not start.
Solution:
• There is a safety interlock to prevent the
motor from starting if it is not properly
assembled. Make sure the work bowl
and work bowl cover are securely locked
into position.
• If you are slicing or shredding and the
above solution does not work, make sure
that the food contents in the feed tube
are cut below the maximum fill line so
that the activation rod can engage the
motor.
emptying the contents of the bowl. Using
extreme care, use a little extra force to
remove the blade.
6. Problem: The food processor vibrated/
moved around the countertop during
processing.
Solution:
• Make sure the rubber feet at the bottom
of the unit are clean and dry. Also make
sure that the maximum load capacity is
not being exceeded.
• This is normal as some heavier loads (e.g.
slicing/shredding cheese) may require the
motor to work harder.
• If the motor still will not start, check the
power cord and outlet.
7. Problem: The large pusher falls out when
the cover is turned upside down.
2. Problem: The food processor shuts off
during operation.
Solution:
Solution:
• The cover may have become unlocked;
check to make sure it is securely in
position.
• A safety protector in the motor prevents
the motor from overheating, which is
caused by excessive strain. Press the Off
control button and wait 10 to 15 minutes
to allow the food processor to cool off
before resuming.
3. Problem: The food processor cover
becomes unlatched in the back and or
makes a loud noise.
Solution:
• The back of the cover becoming
unlatched, and any related noise, will not
prevent the unit from working. Simply
push down to lock the back into position.
4. Problem: The motor slowed down during
operation.
Solution:
• This is normal as some heavier loads (e.g.
slicing/shredding cheese) may require the
motor to work harder. Simply reposition
the food in the feed tube and try again.
• The maximum load capacity may have
been exceeded. Remove some of the
ingredients and continue processing.
5. Problem: It is difficult to remove the
chopping/mixing blade from the work bowl.
Solution:
• These innovative blades have been
designed to lock in the work bowl to
prevent them from falling out when
• The pusher lock feature, located above
the handle, should be pulled out.
WARRANTY
FULL Ten-YEAR
MOTOR WARRANTY
LIMITED 3-YEAR
WARRANTY
This warranty is available to consumers only.
You are a consumer if you own a Cuisinart
Elite Collection™ 12-Cup Food Processor
that was purchased at retail for personal,
family or household use. Except as otherwise
required under applicable law, this warranty is
not available to retailers or other commercial
purchasers or owners.
We warrant that your Cuisinart Elite Collection™
12-Cup Food Processor will be free of defects
in materials and workmanship under normal
home use for three years from the date of
original purchase.
We suggest you complete and return the
enclosed product registration card promptly
to facilitate verification of the date of original
purchase. However, return of the product
registration card does not eliminate the need
for the consumer to maintain the original proof
of purchase in order to obtain the warranty
benefits. In the event that you do not have
proof of purchase date, the purchase date for
purposes of this warranty will be the date of
manufacture.
17
If your Cuisinart Elite Collection™ 12-Cup Food
Processor should prove to be defective within
the warranty period, we will repair it, or if we
think necessary, replace it. To obtain warranty
service, simply call our toll-free number 1-800726-0190 for additional information from our
Customer Service Representatives, or send
the defective product to Customer Service at
Cuisinart, 150 Milford Road, East Windsor, NJ
08520.
To facilitate the speed and accuracy of your
return, please enclose $10.00 for shipping and
handling of the product.
Please pay by check or money order (California
residents need only supply proof of purchase
and should call 1-800-726-0190 for shipping
instructions).
NOTE: For added protection and secure
handling of any Cuisinart® product that is being
returned, we recommend you use a traceable,
insured delivery service. Cuisinart cannot be
held responsible for in-transit damage or for
packages that are not delivered to us. Lost
and/or damaged products are not covered
under warranty. Please be sure to include
your return address, daytime phone number,
description of the product defect, product
model number (located on bottom of product),
original date of purchase, and any other
information pertinent to the product’s return.
Your Cuisinart Elite Collection™ 12-Cup Food
Processor has been manufactured to the
strictest specifications and has been designed
for use with the authorized accessories and
replacement parts.
This warranty expressly excludes any
defects or damages caused by accessories,
replacement parts, or repair service other than
those that have been authorized by Cuisinart.
This warranty does not cover any damage
caused by accident, misuse, shipment or other
ordinary household use.
This warranty excludes all incidental or
consequential damages. Some states do
not allow the exclusion or limitation of these
damages, so these exclusions may not apply
to you.
CALIFORNIA RESIDENTS ONLY:
California law provides that for In-Warranty
Service, California residents have the option of
returning a nonconforming product (A) to the
store where it was purchased or (B) to another
retail store which sells Cuisinart® products of
the same type.
18
The retail store shall then, at its discretion,
either repair the product, refer the consumer
to an independent repair facility, replace
the product, or refund the purchase price
less the amount directly attributable to the
consumer’s prior usage of the product. If the
above options do not result in the appropriate
relief to the consumer, the consumer may then
take the product to an independent repair
facility if service or repair can be economically
accomplished. Cuisinart and not the consumer
will be responsible for the reasonable cost of
such service, repair, replacement, or refund for
nonconforming products under warranty.
California residents may also, according to their
preference, return nonconforming products
directly to Cuisinart for repair, or if necessary,
replacement, by calling our Consumer Service
Center toll-free at 1-800-726-0190.
Cuisinart will be responsible for the cost of the
repair, replacement, and shipping and handling
for such products under warranty.
BEFORE RETURNING
YOUR CUISINART® PRODUCT
If you are experiencing problems with your
Cuisinart® product, we suggest that you call
our Cuisinart® Service Center at
1-800-726-0190 before returning the product
to be serviced. If servicing is needed, a
Representative can confirm whether the
product is under warranty and direct you to
the nearest service location.
Important: If the nonconforming product is to
be serviced by someone other than Cuisinart’s
Authorized Service Center, please remind the
servicer to call our Consumer Service Center
at 1-800-726-0190 to ensure that the problem
is properly diagnosed, the product is serviced
with the correct parts, and the product is still
under warranty.
©2009 Conair Corporation
Cuisinart® is a registered trademark
of the Conair Corporation
150 Milford Road
East Windsor, NJ 08520
Printed in China
08CE12004
IB-8477
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising