Security Labs SLC-155 Datasheet

Security Labs SLC-155 Datasheet
SLC-155
O
| 8
o
=
oO
e
A
©
=
00
Ge
e)
Ö
|
Q
| 8
D
4
EE
oO
=
|
©
e)
e
security labs users manua
Specifications:
Imager Type
Resolution
IR
Light Sensitivity
Video Format
Shutter
White Balance
Gain Control
Lens
Audio
Mount
Power
Operating Temp
Size
1/4” Sony Super HAD CCD
420 Lines
(12) IR LEDs with Halo Diffuser
02 LUX
NTSC Comp 1V p-p
Auto Electronics
Auto
Auto
3.6mm
Condenser Mic
Swivel
12VDC, 135 mA
14°-122° F
217Hx34D
SLC-155 Bullet Camera Installation:
Select a mounting location where the camera can be mounted securely. If an outdoor location is
selected, make sure that the camera is mounted under an eave or awning and has a clear view of the
area to be monitored. After confirming that the mounting location is free from electrical wires or other
hazards, mount the camera securely using the hardware supplied. Connect the audio/video/power cable
to the camera as shown in the connection diagram.
Route the 50° audio/video/power cable from the camera (supplied) to the recording device (DVR),
monitor, or TV. Connect the BNC yellow video plug to the video in jack on the monitoring or recording
device. Connect the 2.1mm red power plug to the power adapter included with the camera. Observe that
one end of the 50° video power cable has a power connection for the camera; the other end connects to
the power supply (different connectors). Connect the white RCA type audio plug to the audio in jack on
the monitoring or recording device. Refer to the connection diagram on the back of this page for cable
connections to your system.
SAFETY
The power adapter supplied with your camera is intended for indoor installation only. Use only the power
supply provided for camera power. To avoid possible shock hazards or product damage, do not alter the
connections or wiring. Use caution when connecting the adapter to AC voltage. Avoid exposure to
electrical wires or other hazards when routing AV or power cables through walls, ceilings, etc. Securely
mount the product to avoid possible damage or physical injury. Use the camera in a well ventilated area.
Do NOT allow camera to become submerged in any liquid.
SURVEILLANCE
Certain laws prohibit the recording or monitoring of individuals without their consent. The user of this
product assumes full responsibility for any and all violations of an individual's rights regarding privacy
laws. Check with your local, and state authorities regarding video and audio surveillance.
Camera-Monitor Systems
Camera
Camera video
(yellow plug)
Camera audio
(white plug)
Power
(red plug)
Power
supply
50’ audio/video/power cable
//
| Monitor or TV \
| ©)
Yellow
MONITOR
video viIDEO
plug IN
©)
MONITOR
AUDIO
a
Camera-Recorder-Monitor Systems
Camera
Camera video
(yellow plug)
Camera audio ||
(white plug)
Power
(red plug)
|
Power
supply
50" audio/video/power cable
/ /
CL
Red
power
plug
Recorder back panel
POWER
©
VIDEO VIDEO VIDEO VIDEO MONITOR
security labs (о) (9) N°
#TOOOO ©
LAN-ETHERNET
—
4 N
Monitor or TV
MONITOR
AUDIO
J
Yellow video
plug to open
video input
IN IN | VIDEO
CH2 CH3 CHA QUT
Questions? Call Security Labs Toll Free Customer Support at 800-774-0284
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement