Hewlett Packard Enterprise Flex-10 552M

Hewlett Packard Enterprise Flex-10 552M
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Overview
The HP Flex-10 10Gb 2-port 552M is a Flex-10 10 Gigabit Ethernet (10GbE) mezzanine card for BL-c Gen8 servers that utilizes the
Emulex BE3 controller. The HP 552M adapter supports Virtual Connect Flex-10, which allows each 10Gb port to be divided into
four physical NICs to optimize bandwidth management for virtualized servers. The HP 552M optimizes network and storage traffic
with hardware acceleration and offloads for stateless TCP/IP and TCP Offload Engine (TOE).
HP Flex-10 10Gb 2-port 552M Adapter
Models
HP Flex-10 10Gb 2-port 552M Adapter
NOTE: The HP 552M on each server blade connects to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
NOTE: The HP 552M adapter requires a minimum of 2 GB of server memory.
NOTE: The HP 552M adapter supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10
device. The HP 552M adapter will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
Kit Contents
674764-B21
HP Flex-10 10Gb 2-port 552M Adapter
Quick install card
Product warranty statement
Drivers, user guide, and utilities via: http://www.hp.com
DA - 14218
North America — Version 2 — March 9, 2012
Page 1
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Compatibility
HP ProLiant Server
Support
Supported Interconnect
Modules
HP ProLiant BL460c Gen8
HP Virtual Connect Flex-10 Ethernet Module
HP 1/10Gb Virtual Connect Ethernet Module
HP 1/10Gb-F Virtual Connect Ethernet Module HP
HP 6120XG Blade Switch
HP 6120G/XG Blade Switch
HP 1:10Gb Ethernet BL-c Switch
Cisco Catalyst 3120G Blade Switch for HP
Cisco Catalyst 3120X Blade Switch for HP
Cisco Catalyst 3020 Blade Switch
Cisco Fabric Extender B22HP for HP
HP GbE2c Layer 2/3 Ethernet Blade Switch
HP 10GbE Pass-Thru Module
HP 1GbE Pass Thru Module
NOTE: Except for the HP Virtual Connect Flex-10 Ethernet Module, the 6120XG and the HP 10GbE
Pass-Thru Module, all other supported interconnects are limited to 1Gb per port connection.
DA - 14218
North America — Version 2 — March 9, 2012
Page 2
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Standard Features
Performance
Product Features
Dual-port 10 Gigabit
Ethernet Throughput
(theoretical bandwidth)
Industry-leading throughput and latency performance
Supports Gen8 c-Class ProLiant BladeSystem servers
Type A Adapter Dual 10Gb ports provide up to 40Gb full duplex per adapter
Hardware acceleration and offloads for stateless TCP/IP and TCP Offload Engine (TOE)
802.1p, 802.1q, 802.1qau 802.3u, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4), 802.3x and
802.3z
Jumbo frames support
Supports HP's Flex-10 technology that allows setting bandwidth from 100Mb to 10Gb in 100Mb
increments on up to four physical function NICs or Flex NICs per port when combined with the
10Gb Flex-10 Virtual Connect module. Each FlexNIC is recognized by the server as a PCI-e
physical function.
Supports receive-side scaling (RSS) for the efficient distribution of network receive processing
across multiple CPUs in multiprocessor systems.
Includes 128 MB of onboard memory.
Supports the Preboot eXecution Environment (PXE)
The 20 Gbps full duplex Ethernet transfer rate per port (40 Gbps aggregate full duplex) delivers
outstanding network performance that improves response time and removes bottlenecks.
HP Virtual Connect Flex- Evolve 10Gb at your own speed! When paired with the HP Virtual Connect Flex-10 10Gb Ethernet
10 10Gb Ethernet Module Modules, take advantage of four Flex NICs, which are PCI Physical Function devices that are
for the c-Class
OS/Hypervisor independent.
BladeSystem
Server ROM recognizes them as individual NICs. Speeds can be set per NIC from 100Mb to 10Gbs in
100Mb increments.
Three fold increase in number of network connections per port and up to four physical function NICs per
port. Ideal for virtualized server environment, especially for dedicated bandwidth application like virtual
machine migration from one physical server to another physical server.
Jumbo Frames
The HP 552M adapter support for jumbo frames (also known as extended frames) permits up to a 9K
byte maximum transmission unit (MTU), which is over five times the size of standard 1500-byte Ethernet
frame. Jumbo frames can help achieve higher throughput and better CPU utilization. Jumbo frames are
particularly useful for database transfers and tape backups.
802.1p QoS Tagging
IEEE quality of service (QoS) 802.1p tagging allows the adapter to mark or tag frames with a priority
level across a QoS-aware network for improved traffic flow.
802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port or FlexNIC of the HP
552M adapter to be assigned to a VLAN for added network segmentation and enhanced security and
performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to
the same VLAN domain also improves performance.
DA - 14218
North America — Version 2 — March 9, 2012
Page 3
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Standard Features
TCP/IP Stateless
Offloading
For overall improved system response, the HP 552M adapter supports standard TCP/IP stateless
offloading techniques including:
TCP/IP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the
network adapter.
Large send offload (LSO), also known as TCP segmentation offload (TSO), allows TCP
segmentation to be handled by the adapter rather than the CPU.
TOE
TCP/IP Offload Engine (TOE) moves the processing of data in the TCP protocol stack from the server
CPU to the network card, freeing CPU cycles for other duties.
RDMA
Not Supported
Warranty
HP branded hardware options qualified for BladeSystem c-Class and p-Class servers are covered by a
global limited warranty and supported by HP Services and a worldwide network of HP Authorized
Channel Partners. The HP branded hardware option diagnostic support and repair is available for one
year from date of purchase, or the length of the server they are attached to, whichever is greater. Support
for software and initial setup is available for 90 days from date of purchase. Additional support may be
covered under the warranty or available for an additional fee. Enhancements to warranty services are
available through HP Care Pack services or customized service agreements.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 14218
North America — Version 2 — March 9, 2012
Page 4
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Service and Support
Service and Support
HP Technology Services
HP Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability and avoid downtime.
Protect your business beyond warranty with HP Care Pack Services
When you buy HP Options, it's also a good time to think about what level of service you may need. HP
Care Pack services provide total care and support expertise with committed response choices designed to
meet your IT and business need.
HP Foundation Care services deliver scalable support-packages for HP industry-standard servers and
software. You can choose the type and level of service that is most suitable for your business needs. New
to this portfolio is HP Collaborative Support. If you are running business critical environments, HP offers
Proactive Care or Critical Advantage. These services help you deliver high levels of application
availability through proactive service management and advanced technical response.
Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For
customized support service solution, HP can work with you to tailor a service solution for your unique
support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended Services
Recommended HP Care Pack Services for optimal satisfaction with your HP product
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who will arrive
on site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
OR
3-Year HP 24x7 4 hour Response, HP Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution,
and basic software problem diagnosis, fault isolation, and resolution if available to HP. If the problem is
with HP HW, the representative will arrive on site any time and day of the year to begin hardware
maintenance service within 4 hours of the service request being logged. In case, the issue is with HP or
supported third-party software product and cannot be resolved by applying known fixes, HP will contact
the third-party vendor and create a problem incident on your behalf.
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
DA - 14218
North America — Version 2 — March 9, 2012
Page 5
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Service and Support
Related Services
Related HP Care Pack Services to enhance your HP product experience
3-Year HP 24x7 4 hour Response, Proactive Care or Critical Advantage
Helps optimize your systems and delivers high levels of application availability through proactive service
management and advanced technical response. A skilled Technical Manager will own your query or
issue end to end until resolved, delivering a single point of contact for you.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-2140ENW.pdf
OR
3-Year HP 6-hour Onsite Call-to-Repair, HP Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to
return the hardware in operating condition within 6 hours of the initial service request to the HP Global
Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HP.
In case, the issue is with HP or supported third-party software product and cannot be resolved by
applying known fixes, HP will contact the third-party vendor and create a problem incident on your
behalf.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
Insight Remote Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://www.hp.com/go/insightremotesupport
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP business
products. Submit support cases online, chat with HP experts, access support resources or collaborate with
peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP
warranty, HP Care Pack or HP contractual support agreement.
*HP' Support Center Mobile App is subject to local availability.
DA - 14218
North America — Version 2 — March 9, 2012
Page 6
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Service and Support
Parts and materials
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements. Supplies and consumable parts will not be provided as part of this service;
standard warranty terms and conditions apply. Parts and components that have exceeded their maximum
supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating
manual or the technical product data sheet will not be provided, repaired or replaced as part of this
service.
Warranty / Service
Coverage
For ProLiant servers and storage systems, this service covers HP-branded hardware options qualified for
the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and tower UPS products; these items will be covered at the same service level and for
the same coverage period as the server unless the maximum supported lifetime and/or the maximum
usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty
terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that
have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have
exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's
operating manual or the technical data sheet are not eligible for the defective media retention service
feature option.
For more information
To learn more on services for HP ESSN Options, please contact your HP sales representative or HP
Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant or
www.hp.com/services/bladesystem
DA - 14218
North America — Version 2 — March 9, 2012
Page 7
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Related Options
Additional c-Class
BladeSystem Adapters
HP 10Gb
interconnects
FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 554FLB Adapter
HP Flex-10 10Gb 2-port 530FLB Adapter
Mezzanine Adapters
HP Flex-10 10Gb 2-port 530M Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem
HP 6120XG Blade Switch
HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
DA - 14218
North America — Version 2 — March 9, 2012
647586-B21
656590-B21
631884-B21
647590-B21
455880-B21
516733-B21
538113-B21
Page 8
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Technical Specifications
General Specifications
Network processor
Data rate
Emulex BE3
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth.
128MB
PCI Express v2.0 (Gen 2) x8
Type A Mezzanine Card
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4),
and, 802.3x
0°C to 55°C / 32°F to 131°F
Temperature
10% to 90% non-condensing
Humidity
Onboard memory
Bus type
Form factor
IEEE Compliance
Power and Environmental Operating
Specifications
Power requirement
Emissions classification
Agency approvals
8.6W idle and 10W maximum
FCC Class A
USA
FCC (CFR 47 part 15) and UL 60950
Canada
ICES-003 and CSA60950
Japan
VCCI
Korea
MIC (RRL), EMC Registration
Australia
ACA, AS/NZS3548/EN55022:1998,
EN55024:1998
European Union
EN55022:1998 (CISPR 22), EN55024:1998,
and IEC60950:1999 (EN60950:2000)
6 of 6
UL Mark (USA and Canada)
CE Mark
EN 60590
RoHS Compliance
Safety
Operating System Support Microsoft:
Microsoft
Microsoft Windows Server 2008 SP2, R2 (x86 and x64)
Microsoft Windows Hyper-V, R2 SP1
Linux:
Linux
RHEL 5, 6, 7
SLES 10, 11
Solaris:
Solaris
Solaris 10 (x86 and x64)
Virtualization:
Virtualization
VMware ESX 4, ESX 5.0
NOTE: For more operating system support & certification information, please visit:
http://h10018.www1.hp.com/wwsolutions/index.html.
DA - 14218
North America — Version 2 — March 9, 2012
Page 9
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2012 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Windows is a US registered trademark of Microsoft Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 14218
North America — Version 2 — March 9, 2012
Page 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement