FLASH-200SP Super Bright LED Spotlight Users Manual • Mode d’emploi • Bedienungshandbuch • Manual d’Uso • Manual de uso Super Bright LED Spotlight Users Manual April 2010, Rev.1 ©2010 Amprobe Test Tools. All rights reserved. Printed in China English FLASH-200SP Limited Warranty and Limitation of Liability Your Amprobe product will be free from defects in material and workmanship for 1 year from the date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Amprobe’s behalf. To obtain service during the warranty period, return the product with proof of purchase to an authorized Amprobe Test Tools Service Center or to an Amprobe dealer or distributor. See Repair Section for details. THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you. Repair All test tools returned for warranty or non-warranty repair or for calibration should be accompanied by the following: your name, company’s name, address, telephone number, and proof of purchase. Additionally, please include a brief description of the problem or the service requested and include the test leads with the meter. Non-warranty repair or replacement charges should be remitted in the form of a check, a money order, credit card with expiration date, or a purchase order made payable to Amprobe® Test Tools. In-Warranty Repairs and Replacement – All Countries Please read the warranty statement and check your battery before requesting repair. During the warranty period any defective test tool can be returned to your Amprobe® Test Tools distributor for an exchange for the same or like product. Please check the “Where to Buy” section on www.amprobe.com for a list of distributors near you. Additionally, in the United States and Canada In-Warranty repair and replacement units can also be sent to a Amprobe® Test Tools Service Center (see address below). Non-Warranty Repairs and Replacement – US and Canada Non-warranty repairs in the United States and Canada should be sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test Tools or inquire at your point of purchase for current repair and replacement rates. In USA Amprobe Test Tools Everett, WA 98203 Tel: 877-AMPROBE (267-7623) In Canada Amprobe Test Tools Mississauga, ON L4Z 1X9 Tel: 905-890-7600 Non-Warranty Repairs and Replacement – Europe European non-warranty units can be replaced by your Amprobe® Test Tools distributor for a nominalv charge. Please check the “Where to Buy” section on www.amprobe.com for a list of distributors near you. European Correspondence Address* Amprobe® Test Tools Europe In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 *(Correspondence only – no repair or replacement available from this address. European customers please contact your distributor.) FLASH-200SP Flashlight 5 1 6 7 4 2 3 1) Head-Lamp 2) 3 Position Gear Selector Switch 3) Handle 4) ON/OFF Switch 5) Handheld 6) Battery Room 7) Battery Cover CONTENTS SYMBOLS............................................................................. 2 UNPACKING AND INSPECTION........................................... 2 INTRODUCTION................................................................... 3 Features........................................................................... 3 OPERATION.......................................................................... 3 SPECIFICATION..................................................................... 5 BATTERY REPLACEMENT..................................................... 5 SYMBOLS � Caution! Refer to the explanation in this Manual = Do not dispose of this clamp meter as unsorted municipal waste. �WARNING and PRECAUTIONS • Do not look at the LED light directly • Do not allow children to use the LED light alone • Flashlight surface maybe hot after using Unpacking and Inspection Your shipping carton should include: 1 FLASH-200SP Flashlight 4 AA Rechargeable Batteries 1 AC Power Adaptor 1 Vehicle charger 1 Manual If any of the items are damaged or missing, return the complete package to the place of purchase for an exchange. INTRODUCTION The flashlight FLASH-200SP is a portable electric spotlight, the whole body is made of metal; it can be used in most of worst condition. Features • Osram Cree XRE Q4 LED • Maximum light output: 2 High beam – up to 200 lumens Low beam – up to 20 lumens Strobe – up to 200 lumens • Illuminating distance (under dark condition): High beam – up to 350m Low beam – up to 50m • Continuous run time: Min. 4 hours (high beam and 100% light on) • IPX4 Waterproof • Powered by 4 AA size rechargeable batteries • Product size: 170.5 x 184.5 x 88 mm (6.7 x 7.3 x 3.4 inch) OPERATING 1. Unscrew the battery cover and install 4 AA size rechargeable batteries into battery room. 2. Screw on the battery cover. 3. Push ON/OFF button; and turn on flashlight SPECIFICATION Maximum light output: High beam – up to 200 lumens Low beam – up to 20 lumens Strobe – up to 200 lumens Continuous run time : Min. 4 hours (high beam) Battery: AA rechargeable battery x 4 Product size: 170.5 x 184.5 x 88 mm (6.7 x 7.3 x 3.4 inch) 3 BATTERY REPLACEMENT Refer to the following figure to replace the batteries: AA Size AA Size 4 PCS “AA” SIZE BATTERIES ON / OFF SWITCH 4
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021