Caseta Wireless In-Wall Dimmer PRO 10NXD SPEC

Caseta Wireless In-Wall Dimmer PRO 10NXD SPEC
CasétaR Wireless
PD-10NXD
In-Wall Dimmer PRO
369919c 1 02.01.16
CasétaR Wireless In-Wall Dimmer PRO
The CasétaR Wireless In-Wall Dimmer PRO controls
lighting loads, both directly and remotely when paired
with Pico® remote controls, providing a system that
delivers convenience and ease of installation.
The CasétaR Wireless In-Wall Dimmer PRO uses
Lutron® patented Clear Connect® RF Technology
which enables wireless communication with Pico®
remote controls and the Lutron® Smart Bridge and
Smart Bridge PRO.
Features
• The CasétaR Wireless In-Wall Dimmer PRO provides
dimming of multiple load types and, when paired with
Pico® remote controls, allows remote control from
anywhere in the space.
• When used with the Lutron® Smart Bridge or Smart
Bridge PRO, the CasétaR Wireless In-Wall Dimmer
PRO may be programmed via the Lutron® app,
incorporated into lighting scenes, scheduled for daily
events, and controlled from anywhere in the world 1.
• Lutron® patented Clear Connect® RF Technology
works through walls and floors.
• Includes Front Accessible Service Switch (FASSTM) for
safe lamp replacement.
• Neutral-optional dimmer is ideal for retrofit
applications when used in two-wire mode, and
provides better performance with LEDs when neutral
is connected.
• Compatible with Lutron® Hi-lume® A-Series LTE
2-wire LED driver, PHPM interfaces (for large wattage
loads and/or ELV loads) and GRX-TVI interfaces (for
0-10 V- driver loads). Neutral wire is required for
drivers and interfaces (for 0-10 V- driver loads).
• Works with compatible dimmable screw-in LEDs as
well as incandescent, halogen, and halogen-based
MLV loads (neutral wire required for MLV).
• Compatible with dimmable ballasts.
CasétaR Wireless
In-Wall Dimmer PRO
Pico® Remote Control
Lutron® Smart Bridge
and Smart Bridge PRO
Load Types and Capacity 2
See www.casetawireless.com/bulblist for the latest list
of compatible bulbs.
Compatible
Dimmable LED
(screw-in)
Up to 250 W
MLV Halogen
Up to 1000 VA
Halogen
Up to 1000 W
Incandescent
Up to 1000 W
1 The
2
Lutron® app is required for setup and use with the Smart Bridge and Smart Bridge PRO. The Lutron® app is compatible with iOS® devices version 6.0
or later and AndroidR devices 4.0 or later.
See Ganging and Derating section.
iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Android is a registered trademark of Google Inc.
S pecification Sub mit t al
Job Name:
Job Number:
Model Numbers:
Page 1
CasétaR Wireless
PD-10NXD
In-Wall Dimmer PRO
369919c 2 02.01.16
Specifications
Regulatory Approvals
System Communications and Capacity
•cULus Listed
•NOM certified
•FCC approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
•Industry Canada certified
•IFTEL certified
•The CasétaR Wireless In-Wall Dimmer PRO
communicates with PicoR remote controls and
LutronR Smart Bridge or Smart Bridge PRO via Radio
Frequency (RF).
•The CasétaR Wireless In-Wall Dimmer PRO
communicates with LutronR Radio Powr SavrT
Occupancy and Vacancy Sensors in a standalone
application. Sensors do not work with Smart Bridge
or Smart Bridge PRO.
•The CasétaR Wireless In-Wall Dimmer PRO must be
located within 60 ft (18 m) line-of-sight or 30 ft (9 m)
through walls, of PicoR remote controls and Smart
Bridge or Smart Bridge PRO.
Power
•Operating voltage: 120 V~ 50/60 Hz
Key Design Features*
•Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with
IEC 61000-4-2.
•Tested to withstand surge voltages without damage or
loss of operation, in accordance with
IEEE C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
•Dimmers always operate locally and do not require
system control.
•Power failure memory: should power be interrupted,
the control will return to its previously set level prior to
the interruption when power is restored.
•Uses LutronR ClaroR wallplates or designer‑style
wallplates from other manufacturers. Wallplates are
sold separately.
•LutronR ClaroR seamless wallplates snap on with no
visible means of attachment.
•Multi-gang seamless wallplates are available up to
6-gang in matching colors (see page 6)
•Dimmers require a 1-gang U.S. wallbox. 31⁄2 in (89 mm)
deep recommended, 21⁄4 in (57 mm) deep minimum.
•Green LEDs indicate load status.
Device limits
•PicoR remote controls only: up to 10 PicoR remote
controls may be paired to each CasétaR Wireless
In‑Wall Dimmer PRO (with no Smart Bridge installed).
•Smart Bridge or Smart Bridge PRO system: up to
50 total wireless devices (CasétaR Wireless dimmers/
switches, PicoR remote controls) are supported per
system. Smart Bridge or Smart Bridge PRO counts
as one device.
•CasetaR Wireless In-wall dimmer PRO has load type
and capacity limits (see page 4)
Environment
•Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%-90% humidity, non-condensing.
Indoor use only.
* For advanced features, tips on how to use CasétaR Wireless dimmers with LEDs, the complete CasétaR Wireless product line, and more, please
visit www.casetawireless.com/features
S pecification Sub mit t al
Job Name:
Job Number:
Model Numbers:
Page 2
CasétaR Wireless
PD-10NXD
In-Wall Dimmer PRO
369919c 3 02.01.16
Operation
In-Wall Dimmer PRO
Status LEDs
Indicate load status
On
Brighter
Darker
Off
TM
S
• FA STM •
• FASSTM •
TM
SSTM • FASS
FA
FASST
Front
Accessible
Service
Switch
•
SSTM FASS
FA
Important notice:
FASST – Front Accessible Service Switch – to service load, remove power by pulling the FASST out completely on
dimmer. After servicing load, push the FASST back in fully to restore power to the control.
Mounting
Dimmer
Mounting
Screws
Adapter
Mounting
Screws
Wallbox
Dimmer
Wallplate / Adapter
purchased separately.
S pecification Sub mit t al
Job Name:
Job Number:
Model Numbers:
Page 3
CasétaR Wireless
PD-10NXD
In-Wall Dimmer PRO
369919c 4 02.01.16
Dimensions
Side View
Front View
411⁄16 in
(119 mm)
215⁄16 in
(75 mm)
5/16 in
(8 mm)
11⁄8 in
(30 mm)
Ganging and Derating
When ganging with other controls in the same wallbox, derating is required.
See Load Type and Capacity chart.
Do not remove outside fins on
end of gang controls
Load Type and Capacity *
A
LED Total Wattage
(screw-in LEDs)
Each control has
inside fins removed
Middle of gang
control has all fins
removed
0W
1 W – 25 W
26 W – 50 W
51 W – 75 W
76 W – 100 W
101 W – 125 W
126 W – 150 W
151 W – 175 W
176 W – 200 W
201 W – 225 W
226 W – 250 W
B
B
B
C
B
Incandescent / Halogen Total Wattage
A
+
+
+
+
+
+
+
+
+
+
+
1000 W
900 W
800 W
700 W
600 W
500 W
400 W
300 W
200 W
100 W
0W
B
800 W
750 W
700 W
600 W
500 W
400 W
300 W
200 W
100 W
50 W
0W
C
600 W
550 W
500 W
450 W
400 W
300 W
200 W
100 W
50 W
0W
0W
• Mixing bulb types (using a combination of LED and incandescent / halogen bulbs)
reduces maximum wattage as shown in the chart above.
• In-Wall Dimmer PRO has a minimum load requirement of 10 W with neutral
connected (25 W without neutral) or one bulb from the compatible bulb list.
*See www.casetawireless.com/bulblist for the latest list of compatible bulbs.
S pecification Sub mit t al
Job Name:
Job Number:
Model Numbers:
Page 4
CasétaR Wireless
PD-10NXD
In-Wall Dimmer PRO
369919c 5 02.01.16
Wiring Diagrams
Single Location Installation
Line / Hot
Black
Blue1
CasétaR
Wireless
In-Wall
Dimmer
PRO
Red
Green
120 V~
50 / 60 Hz
Load
White3
Ground
Neutral
Multi-Location Installation
With Pico® remote controls (PJ2-XX-XX) and wallbox mounting adapters (PICO-WBX-ADAPT)
Black
Black
Travelers
PicoR
remote
control
and
wallbox
mounting
adapter
Line / Hot
120 V~
50 / 60 Hz
PicoR
remote
control
and
wallbox
mounting
adapter
Travelers
Blue1
White3
CasétaR
Wireless
In-Wall
Dimmer
PRO
Red
Green
Load
Ground
Neutral
3-Way Installation
With mechanical switch
Brass
Brass
Line/Hot
Black
Mechanical
Switch2
Black
White3
120 V~
50/60 Hz
1
2
3
Red
Green
Ground
Neutral
Blue
CasétaR
Wireless
In-Wall
Dimmer
PRO2
Jumper wire
(included)
Load
Ground
When using controls without mechanical 3-way switch, cap the blue terminal. Do not connect the blue wire to any other wiring or to ground.
Location of CasétaR Wireless In-Wall Dimmer PRO and mechanical switch may be reversed.
Neutral connection optional except for MLV loads, LED drivers, and power modules (PHPM-PA, PHPM-3F, and GRX-TVI).
S pecification Sub mit t al
Job Name:
Job Number:
Model Numbers:
Continued on next page...
Page 5
CasétaR Wireless
PD-10NXD
In-Wall Dimmer PRO
369919c 6 02.01.16
Wiring Diagrams
(cont.)
Installation with PHPM - Neutral required1
Red
Black
Ground
DH
Control Neutral
Zone In
Green
120 V~
60 Hz
N
Line/Hot
PHPM
CasétaR
Wireless
In-Wall
Dimmer
PRO
L/H
White
Load
Ground
Blue
Neutral
Installation with GRX-TVI - Neutral required2
GRX-TVI
Line/Hot
Black
L2/H2 100-277 V~
Red
CasétaR
Wireless
In-Wall
Dimmer
PRO
Green
120 V~
60 Hz
White
Ground
Blue
Neutral
Neutral 2
1
2
Ground
See LutronR P/Ns 369356 and 369355 for additional wiring diagrams.
See LutronR P/N 369247 for wiring additional diagrams.
S pecification Sub mit t al
Job Name:
Job Number:
Model Numbers:
Page 6
CasétaR Wireless
PD-10NXD
In-Wall Dimmer PRO
369919c 7 02.01.16
Colors and Finishes
Gloss Finishes
White
WH
Black
BL
Ivory
IV
Light Almond
LA
ue to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual
D
product colors.
S pecification Sub mit t al
Job Name:
Job Number:
Model Numbers:
Page 7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising