ler - Lowell Manufacturing

ler - Lowell Manufacturing
How May We Help You?
LOWELL HEADQUARTERS & FACTORY
HOURS: 8:00AM - 4:30PM (CENTRAL)
Located off
100 Integram Drive
Pacific, Missouri 63069 USA
800.325.9660 | 888.456.9355 (fax)
www.lowellmfg.com
[email protected]
LOWELL WEST COAST DISTRIBUTION CENTER
HOURS: 9:00AM - 5:30PM (PACIFIC)
9357 Richmond Place, Suite 104
Rancho Cucamonga, California 91730 USA
909.466.0253
1
2
3
4
5
7
6
8
9
#
1
2
3
4
5
6
7
8
9
Product
Page
Blank Panels.........68-69
Fan Panels............64
UDP Drawer..........61
LGVR Series.........22-23
LFR Series............10-11
LGR Series ...........16-17
VDS-1-1525 ..........58
US-210..................58
FS18-16 ................55
©2015 Lowell Manufacturing Company
Welcome to Lowell Racks & Enclosures
With a level of quality unsurpassed in the industry and more and
more projects requiring compliance with Buy American initiatives,
why trust your A/V equipment to be protected by anything less
than racks formed from certified U.S. steel? Our racks and enclosures are engineered to provide the strength, durability and
value demanded by today’s top systems integration specialists.
With more than 30 unique series plus the capability to develop
custom configurations, we invite you to experience Lowell quality
for your next integrated system.
3
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
TABLE of CONTENTS
STAND-ALONE .............................................................................................................................6-15
LER
6-7
LSER
8-9
LFR
10-11
LHR
12-13
LRR
14
LLR
15
GANGABLE .................................................................16-25
LGR
16-17
LGNR
18-19
LGTR
20-21
LGVR
22-23
LSGR
24-25
BUILT-IN ......................................................30-37
LXR
30-31
LVR
32-33
HALF RACK
LHFR
42-43
LCR
34
LPOR
35
LPTR
36-37
PORTABLE ......................26-29
LPR
26-27
LPPR
28
LCDR
29
DESKTOP/UNDER-COUNTER......38-41
LDTR
38
LDSR
39
LRS
40
LPSR
41
WALL-MOUNT ......................................................................................44-52
LWR
44-45
LWBR
46-47
LWSR
48
LWER
49
LWTR
50
4
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
LWTCR
51
VR
52
WALL-MOUNT SHELVES ...........54-55
WS
54
WSL
54
RACK BUNDLES................................................56-57
FS
55
LER---IAV
56
LXR---IAV
57
RACKWARE® ACCESSORIES....................................................................................................58-73
Rackmount Shelves
58-59
Custom Face Plate
60
Drawers & Liners
61
Cable Management
62-63
Thermal Management
64
Mounting Rails
65
Doors
66-67
Specialty Tops
67
Panels & Security Covers
68-71
Hardware
71-72
Rack Bases
73
ICONOLOGY
Lowell uses certified
US steel.
Made in
Missouri, USA
We are a USA manufacturer
supporting the American
worker and US economy.
BIM models are available for
select products online at
www.lowellmfg.com
Products ship flat for easier,
more cost effective shipping.
Assembly required.
Compatible
Products with this icon
are great for commercial
or home AV applications
Look for this icon for technical
tips and unique designs.
5
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
STAND-ALONE
LER ENCLOSED RACK
Application
The LER is engineered as a stand-alone cabinet with beveled corners and welded
sides (not removable) for solid security and protection.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (14-ga. base), reinforced at all load-bearing junctions. Static load capacity 500-3150 lbs., depending
on rack size. Beveled front and rear corners. Black wrinkle powder epoxy finish.
LER-4427
What’s Included ?
Top . . . . . . . . . . . . . . . . . Shorter racks have a solid top and two vents to mount
single fan kits for spot cooling (order separately).
Taller racks have a 7U or 10U opening which can be
closed with black steel panels (included as shipping
stiffeners) or 19"W fan or vent panels (optional, order
separately). See chart.
Open Base . . . . . . . . . . . Base features a full size opening, grounding stud and
threaded inserts for optional leg levelers (pg. 72). There
is a hole pattern ready to mount an optional mobile or
platform base, or anchor bolts (not included).
Open Front. . . . . . . . . . . . Front has vents at top and bottom, and is prepped to
mount an optional front door (left or right).
Rear Door . . . . . . . . . . . . The standard rear door is recessed and has vents at
top and bottom. Includes handle and keyed lock.
Mounts left or right (field changeable).
Welded Sides . . . . . . . . . Welded side panels have vents at top and bottom.
Adjustable Rails . . . . . . . Mounting rails (tapped 10-32) can be repositioned
anywhere along side rail supports. Quantity of rails
and rail supports varies with rack size. Printed RU
scale facilitates gear-mounting.
Cable Management . . . . . Multiple cable lacing points. Rear features removable
knockout panels with combination knockouts above
and below door. Racks with open top include combination knockouts for conduit and BNC wireless antennas.
Thermal Management. . . Front vents. Rear door vents and side vents accept
optional single fan kit (pg. 64).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
LER-4427
What’s Optional ?
Front Door . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid, fully-vented, or smoked plexiglass.
(LFD Series).
Additional Rails . . . . . . . Rails mount anywhere along side rail supports.
(RRD Series).
Platform Base . . . . . . . . . Mobile or stationary base (LMSB, LMB and LSB Series).
Rackware® Accessories . Utility drawers, fan panels, cable managers, etc. can
be found in the accessories section (pg. 58).
Ordering Flexibility
Omit Rear Door . . . . . . . This rack can be ordered without a rear door by
adding “LRD” as a suffix to the model number (e.g.
LER-4032-LRD).
Upgrade Ventilation . . . . Omit standard rear door then order a fully-vented rear
door separately (LRD-FV Series, pg 66).
Add Dutch Doors . . . . . . Add a dual-door frame to be able to mount two front
doors, separating access to equipment in a single
rack installation (LDDF Series, pg. 67).
Certification & Compliance
EIA/TIA
COMPLIANT
6
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
FRONT
SIDE
Ships
ready to
mount
optional
front door
Integral
rails
tapped
10-32
BACK
Removable
knockout
panels
above and
below rear
door
Welded
side panels
have vents
at top and
bottom
OPEN TOP
CLOSED TOP
(Taller models)
(Shorter models)
Riveted
top rails
tapped
10-32
Multiple BNC
knockout points
for UHF/VHF
wireless antennas
Racking
Space
Solid steel top
with two vents.
Combination
knockouts
BASE
Grounding
stud
LER-4427
Rear door
vents at
top and
bottom
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg.
58. Bases may increase overall rack height significantly. See online spec sheets for information.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
Overall
Width
Mtg
Rails
Rear
Door
Top
Opening
Solid
Fully-vented
Front Door Front Door
LER-1822
22.00”
18U
37.63”
19.34”
23.06”
1 pr
Vented
---
LFD-18
LER-2122
22.00”
21U
42.88”
19.34”
23.06”
1 pr
Vented
---
LFD-21
Plexiglass
Front Door
Add’l Mtg
Rails (pr)
Mobile
Base
Stationary
Base
Fully-vented
Rear Door
LFD-18FV
LFD-18P
RRD-18
LMSB-22
LSB-22
---
LFD-21FV
LFD-21P
RRD-21
LMSB-22
LSB-22
---
LER-2422
22.00”
24U
48.13”
19.34”
23.06”
1 pr
Vented
---
LFD-24
LFD-24FV
LFD-24P
RRD-24
LMSB-22
LSB-22
---
LER-3522
22.00”
35U
67.38”
19.34”
23.06”
1 pr
Vented
7U*
LFD-35
LFD-35FV
LFD-35P
RRD-35
LMSB-22
LSB-22
LRD-35FV
LER-4022
22.00”
40U
76.13”
19.34”
23.06”
1 pr
Vented
7U*
LFD-40
LFD-40FV
LFD-40P
RRD-40
LMSB-22
LSB-22
LRD-40FV
LER-4422
22.00”
44U
83.13”
19.34”
23.06”
1 pr
Vented
7U*
LFD-44
LFD-44FV
LFD-44P
RRD-44
LMSB-22
LSB-22
LRD-44FV
LER-1827
27.00”
18U
37.63”
24.34”
23.06”
1 pr
Vented
---
LFD-18
LFD-18FV
LFD-18P
RRD-18
LMB-27
LSB-27
---
LER-2127
27.00”
21U
42.88”
24.34”
23.06”
1 pr
Vented
---
LFD-21
LFD-21FV
LFD-21P
RRD-21
LMB-27
LSB-27
---
LER-2427
27.00”
24U
48.13”
24.34”
23.06”
1 pr
Vented
---
LFD-24
LFD-24FV
LFD-24P
RRD-24
LMB-27
LSB-27
---
LER-3527
27.00”
35U
67.38”
24.34”
23.06”
1 pr
Vented
7U*
LFD-35
LFD-35FV
LFD-35P
RRD-35
LMB-27
LSB-27
LRD-35FV
LER-4027
27.00”
40U
76.13”
24.34”
23.06”
1 pr
Vented
7U*
LFD-40
LFD-40FV
LFD-40P
RRD-40
LMB-27
LSB-27
LRD-40FV
LER-4427
27.00”
44U
83.13”
24.34”
23.06”
1 pr
Vented
7U*
LFD-44
LFD-44FV
LFD-44P
RRD-44
LMB-27
LSB-27
LRD-44FV
LER-2432
32.00”
24U
48.13”
29.34”
23.06”
2 pr
Vented
10U*
LFD-24
LFD-24FV
LFD-24P
RRD-24
LMB-32
LSB-32
---
LER-3532
32.00”
35U
67.38”
29.34”
23.06”
2 pr
Vented
10U*
LFD-35
LFD-35FV
LFD-35P
RRD-35
LMB-32
LSB-32
LRD-35FV
LER-4032
32.00”
40U
76.13”
29.34”
23.06”
2 pr
Vented
10U*
LFD-40
LFD-40FV
LFD-40P
RRD-40
LMB-32
LSB-32
LRD-40FV
LER-4432
32.00”
44U
83.13”
29.34”
23.06”
2 pr
Vented
10U*
LFD-44
LFD-44FV
LFD-44P
RRD-44
LMB-32
LSB-32
LRD-44FV
*Top opening can be closed using the solid black panels included as shipping stiffeners. For added ventilation, mount optional 19” W fan panels (FW Series, pg. 64) or vent panels (SVSP-3, SVSP-4 or
SVSP-7, pg. 67). Order separately.
Lowell’s unique vent pattern in rear doors and select side panels, such as those found on the LER series, allows single fan kits (such as FW1-KIT) to be
mounted anywhere along the pattern inside the cabinet. Great for spot cooling!
7
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LSER SEISMIC-CERTIFIED ENCLOSED RACK
Application
The LSER seismic-certified enclosed rack is Professional Engineer (P.E.) certified
for two categories of seismic qualifications. Document packages for IBC, CBC and
OSHPD are included with the rack, and can also be downloaded from lowellmfg.com.
Construction
Made in the U.S.A. with welded 16-gauge certified U.S. steel with a 14-ga. steel
bottom with welded brackets in each corner, reinforced at all load-bearing junctions. Beveled front and rear corners. Black powder epoxy finish.
What’s Included ?
Configurable Top . . . . . . Racks have a 7U or 10U opening which can be
closed with black steel panels (included as shipping
stiffeners) or 19"W fan or vent panels (optional, order
separately). See chart.
Open Base . . . . . . . . . . . Base features a grounding stud and hole pattern
ready to mount anchor bolts (not included).
Open Front. . . . . . . . . . . . Front has vents at top and bottom, and is prepped to
mount an optional front door (left or right).
Rear Door . . . . . . . . . . . . The standard rear door is recessed and has vents at
top and bottom. Includes handle and keyed lock.
Mounts left or right (field changeable).
Welded Sides . . . . . . . . . Welded side panels have vents at top and bottom.
Adjustable Rails . . . . . . . Mounting rails (tapped 10-32) can be repositioned
anywhere along side rail supports. Quantity of rails
and rail supports varies with rack size. Printed RU
scale facilitates gear-mounting.
Cable Management . . . . . Multiple lacing points. Rear features removable
knockout panels with combination knockouts above
and below door. Top has combination knockouts for
conduit and BNC wireless antennas.
Thermal Management. . . Front vents. Top accepts optional 19”W fan panels (pg.
64) or optional vent panels (pg. 67). Rear door vents
and side vents accept optional single fan kit (pg. 64).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
LSER-4427
Front Door . . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid, fully-vented, or smoked plexiglass.
(LFD Series in chart at right).
Additional Rails . . . . . . . Rails mount anywhere along side rail supports (RRD
Series in chart at right).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Certification & Compliance
EIA/TIA
COMPLIANT
The LSER has welded corner
brackets and holes for anchoring
(bolts not included)
8
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Seismic Qualifications
The LSER seismic-certified enclosed rack is Professional Engineer (P.E.) certified to meet or exceed the seismic design requirements
as specified in the 2009 International Building Code (IBC), Section 1613; the 2010 California Building Code (CBC), Section 1613;
and California’s Office of Statewide Health Planning and Development (OSHPD)
1. Racks identified as part of a Life Safety/Essential System (lp = 1.5). These racks are so designated and required in
critical or essential facilities where operation and function following a major earthquake event is necessary. See IBC and
CBC document packages.
2. Racks requiring seismic design ‘Anchorage’ by code (lp = 1.0), but are NOT identified as a Life Safety/Essential System.
These racks only require their supports and attachments; i.e., anchorage, to be seismically qualified and certified. See IBC,
CBC and OSHPD document packages.
Technical
FRONT
SIDE
Ships
ready to
mount
optional
front door
Integral
rails
tapped
10-32
REAR
Removable
knockout
panels
above rear
door
Welded
side panels
have vents
at top and
bottom
TOP
Combination
knockouts
Riveted
top rails
tapped
10-32
Multiple BNC
knockout
points for
UHF/VHF
wireless
antennas
Rear door
vents at
top and
bottom
Racking
Space
LSER-4427
BASE
Seismic bases
include welded
bracket reinforcements in
each corner
and holes for
anchoring
(bolts not included)
Blank project
panels below
rear door
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg.
58. See online spec sheets for information.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
Overall
Width
Mtg
Rails
Rear
Door
Top
Opening
Solid
Front Door
Fully-vented
Front Door
Plexiglass
Front Door
Add’l Mtg
Rails (pr)
LSER-3527
27.00”
35U
67.38”
24.34”
23.06”
1 pr
Vented
7U*
LFD-35
LFD-35FV
LFD-35P
RRD-35
LSER-4027
27.00”
40U
76.18”
24.34”
23.06”
1 pr
Vented
7U*
LFD-40
LFD-40FV
LFD-40P
RRD-40
LSER-4427
27.00”
44U
83.13”
24.34”
23.06”
1 pr
Vented
7U*
LFD-44
LFD-44FV
LFD-44P
RRD-44
LSER-3532
32.00”
35U
67.38”
29.34”
23.06”
2 pr
Vented
10U*
LFD-35
LFD-35FV
LFD-35P
RRD-35
LSER-4032
32.00”
40U
76.18”
29.34”
23.06”
2 pr
Vented
10U*
LFD-40
LFD-40FV
LFD-40P
RRD-40
LSER-4432
32.00”
44U
83.13”
29.34”
23.06”
2 pr
Vented
10U*
LFD-44
LFD-44FV
LFD-44P
RRD-44
*Top opening can be closed using the solid black panels included as shipping stiffeners. For added ventilation, mount optional 19” W fan panels (FW Series, pg. 64) or vent panels (SVSP-3, SVSP-4 or
SVSP-7, pg. 67). Order separately.
Lowell’s unique vent pattern in rear doors and select side panels, such as those found on the LSER series, allows single fan kits (such as FW1-KIT) to be
mounted anywhere along the pattern inside the cabinet. Great for spot cooling!
9
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LFR FIXED RAIL RACK
Application
The LFR is the most versatile, cost-effective, fixed rail floor rack in its class. The
unique design features welded brackets in the back of the cabinet for mounting optional (semi-adjustable) rear rails or accessories. It comes with welded sides (not
removable) and fixed position front rails that remain in the fully-forward position.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (16-ga. top and
14-ga. base), reinforced at all load-bearing junctions. Welded support brackets in
the rear serve as mounting points for optional rails, vertical cable managers or
AC power strips. Static load capacity 500-2000 lbs., depending on rack size. Black
wrinkle powder epoxy finish.
What’s Included ?
LFR-4427
Top . . . . . . . . . . . . . . . . . Shorter racks have a solid top and two vents to mount
single fan kits for spot cooling (order separately).
Taller racks have a 7U or 10U opening which can be
closed with black steel panels (included as shipping
stiffeners) or 19"W fan or vent panels (optional, order
separately). See chart.
Open Base . . . . . . . . . . . Base includes a grounding stud and threaded inserts
for optional leg levelers (pg. 72) or anchor bolts (not
included).
Open Front. . . . . . . . . . . . Front has vents at top and bottom, and is prepped to
mount an optional front door (left or right).
Rear Door . . . . . . . . . . . . The standard rear door is recessed and has vents at
top and bottom. Includes handle and keyed lock.
Mounts left or right (field changeable).
Welded Sides . . . . . . . . . Welded side panels have vents at top and bottom.
Mounting Rails . . . . . . . . One pair, fixed-position front rails (tapped 10-32) with
printed rack unit increments for quick set-up.
Cable Management . . . . . Rear features combination knockouts above and below
door.
Thermal Management. . . Vents in front, rear door and sides accept optional single fan kit (pg. 64) for spot cooling, as do vents in solid
top racks. Racks with an open top accept optional
19”W fan panels (pg. 64) or vent panels (pg. 67).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid, fully-vented, or smoked plexiglass.
(LFD Series).
Rear Rails . . . . . . . . . . . . Rails mount to rear support brackets. (RRD Series).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Certification & Compliance
The LFR’s unique
design features
welded brackets in
the back of the
cabinet for mounting
optional rear rails
EIA/TIA
COMPLIANT
10
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
SIDE (interior)
FRONT
SIDE
REAR
OPEN TOP
CLOSED TOP
(Taller models)
(Shorter models)
Ships
ready to
mount
optional
front
door
Solid steel top for
shorter racks has
two vents. Vents
will accept optional single fan
kits (p. 64)
Integral top rails
tapped 10-32
Racking
Space
LFR-4427
BASE
Grounding
stud
Racks up to 24U
have 2 welded brackets, 35U and taller
racks have 3 (as
shown). Brackets will
support optional rear
rails, cable managers
or AC power strips
Welded side panels
have vents at top
and bottom
Knockouts above
and below rear
door
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg.
58. Bases may increase overall rack height significantly. See online spec sheets for information.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
Overall
Width
Mtg
Rails
Rear
Door
Top
Opening
Solid
Front Door
Fully-vented
Front Door
Plexiglass
Front Door
Add’l Mtg
Rails (pr)
Mobile
Base
Stationary
Base
LSB-22
LFR-2122
22.00”
21U
42.88”
19.25”
23.06”
1 pr
Vented
---
LFD-21
LFD-21FV
LFD-21P
RRD-21
LMSB-22
LFR-2422
22.00”
24U
48.13”
19.25”
23.06”
1 pr
Vented
---
LFD-24
LFD-24FV
LFD-24P
RRD-24
LMSB-22
LSB-22
LFR-3522
22.00”
35U
67.38”
19.25”
23.06”
1 pr
Vented
---
LFD-35
LFD-35FV
LFD-35P
RRD-35
LMSB-22
LSB-22
LFR-3527
27.00”
35U
67.38”
24.25”
23.06”
1 pr
Vented
7U*
LFD-35
LFD-35FV
LFD-35P
RRD-35
LMB-27
LSB-27
LFR-4027
27.00”
40U
76.13”
24.25”
23.06”
1 pr
Vented
7U*
LFD-40
LFD-40FV
LFD-40P
RRD-40
LMB-27
LSB-27
LFR-4427
27.00”
44U
83.13”
24.25”
23.06”
1 pr
Vented
7U*
LFD-44
LFD-44FV
LFD-44P
RRD-44
LMB-27
LSB-27
*Top opening can be closed using the solid black panels included as shipping stiffeners. For added ventilation, mount optional 19” W fan panels (FW Series, pg. 64) or vent panels (SVSP-3, SVSP-4 or
SVSP-7, pg. 67). Order separately.
Lowell’s unique vent pattern in rear doors and select side panels, such as those found on the LFR series, allows single fan kits (such as FW1-KIT) to be
mounted anywhere along the pattern inside the cabinet. Great for spot cooling!
11
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LHR HOST RACK
Application
The LHR is engineered for multi-bay applications where easy access to equipment connections and cabling is required even when racks are arranged against
a wall or back-to-back. The exterior cabinet hosts an interior rack frame that pulls
out and rotates for accessibility.
Construction
Made in the U.S.A. with fully welded 16-ga. certified U.S. steel (14-ga. base), reinforced at all load-bearing junctions. Load capacity 750 lbs. Green grounding
wire from exterior cabinet to interior rack. Beveled corners in front and rear. Black
wrinkle powder epoxy finish.
What’s Included ?
LHR-4432
Configurable Top . . . . . . Integral top rails in exterior cabinet mount steel closure panels (included as shipping stiffeners) or optional 19”W accessories.
Welded Sides . . . . . . . . . Exterior cabinet features welded sides with top and
bottom vents for passive heat dissipation. Interior
rack has open sides.
Open Front. . . . . . . . . . . . Front of exterior cabinet has vents at top and bottom,
and is prepped to mount an optional front door (left
or right).
Open Back . . . . . . . . . . . Open back allows easy cable routing in back-to-back
configurations. Optional rear access cover is available for other applications.
Platform Base . . . . . . . . . Interior rack pulls forward and rotates on stainless
steel ball transfers set into the platform base. It can
be removed from the exterior cabinet for shop wiring.
Corner Post Rails . . . . . . Interior rack has corner post mounting rails (tapped
10-32). Printed RU scale facilitates gear-mounting.
Cable Management . . . . . Four lacing panels. Multiple points for cabling include
removable knockout panels above and below rear
opening with combination knockouts, and obrounds
on interior rack. Top of rack has knockouts for conduit and BNC wireless antennas.
Thermal Management. . . Exterior cabinet features top and bottom vents on
front, and sides. Vents are designed to accept optional single fan kit (pg. 64).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Interior base slides forward
permitting rack to rotate for
easy access to rear of
equipment and cabling.
Front Door . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid steel or smoked plexiglass (LHR-FD
Series in chart at right).
Rear Access Cover . . . . Rear access cover with keyed lock opens from top
(LHR-RAC Series in chart at right).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers,
etc. can be found online at lowellmfg.com with our
full line of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories section (pg. 58).
Certification & Compliance
EIA/TIA
COMPLIANT
Stainless steel ball
transfers, in interior
base, allow rack to
pivot smoothly, even
under heavy loads
12
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
FRONT
SIDE
REAR
Removable
knockout
panels at top
and bottom
of exterior
cabinet
Exterior
cabinet
has side
vents
Ships
ready to
mount
optional
front door
Racking
Space
LHR-4432
Optional
rear access
cover can
be added
for security
TOP
Combination
knockouts
Multiple BNC
knockout points
for UHF/VHF
wireless antennas
Interior rack
with platform base
can be completely
removed from
exterior cabinet
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
Pulled-out
Depth
Overall
Width
Corner Post
Rails
Solid
Front Door
Plexiglass
Front Door
Rear
Access Cover
LHR-2432
32.00”
24U
53.86”
26.00”
57.88”
24.00”
4
LHR-FD24
LHR-FD24P
LHR-RAC24V
LHR-3532
32.00”
35U
73.27”
26.00”
57.88”
24.00”
4
LHR-FD35
LHR-FD35P
LHR-RAC35V
LHR-4432
32.00”
44U
89.02”
26.00”
57.88”
24.00”
4
LHR-FD44
LHR-FD44P
LHR-RAC44V
LHR-4442
42.00”
44U
89.02”
36.00”
77.88”
24.00”
4
LHR-FD44
LHR-FD44P
LHR-RAC44V
13
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LRR RELAY RACK
Application
The LRR relay or network rack is an open frame engineered for cables requiring
full access. Ideal for telecommunications, commercial sound, broadcast, data and
switching applications
Construction
Made in the U.S.A., the LRR consists of two 11-gauge steel channels, an aluminum top and aluminum base. Black powder epoxy finish. Ships unassembled.
What’s Included ?
Vertical Channels . . . . . . Steel channels (3”W) feature mounting holes tapped
10-32 on E.I.A. mounting centers.
Top . . . . . . . . . . . . . . . . . Two-piece aluminum top
Base . . . . . . . . . . . . . . . . . Two-piece aluminum base with four anchor holes to
secure unit to floor where specified by code (bolts not
included).
Hardware . . . . . . . . . . . . . Assembly and panel-mounting hardware.
What’s Optional ?
Cable Managers . . . . . . . A variety of cabling aids are available in the accessories section (pg. 62).
Certification & Compliance
EIA/TIA
COMPLIANT
Technical
FRONT
SIDE
LRR-3815
BASE
Pre-drilled holes in
base allow rack to
be secured to floor
when needed for
code compliance
LRR-4515
Racking
Space
Model Numbers
Rack
Model No.
Overall
Depth (at base)
Racking
Space
Overall
Height
Overall
Width
LRR-3815
15.00”
38U
72.00”
20.25”
LRR-4515
15.00”
45U
84.00”
20.25”
14
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
LLR LAMINATED RACK
Application
The LLR laminated rack is made of a sturdy 5/8” wood composite that’s been
treated to a premium “Cathedral Black” woodgrain laminate finish. This rack is especially well suited for home offices, studios and entertainment areas.
Construction
Made in the U.S.A. Phillips-head cams and dowels install from the inside and include black covers for a “hardware free” furniture-grade appearance. Load capacity 200 lbs. Ships unassembled.
What’s Included ?
LLR-1618-B
Top . . . . . . . . . . . . . . . . . . Sturdy wood composite, Cathedral Black woodgrain
laminate finish.
Base . . . . . . . . . . . . . . . . . Sturdy wood composite, Cathedral Black woodgrain
laminate finish.
Sides . . . . . . . . . . . . . . . . Sturdy wood composite, Cathedral Black woodgrain
laminate finish.
Open Front. . . . . . . . . . . . Open front allows easy access to equipment controls.
Open Back . . . . . . . . . . . . Open back for easy wiring and passive heat
dissipation.
Fixed Rails. . . . . . . . . . . . Front mounting rails (tapped 10-32) remain in the
factory-mounted position.
Hardware . . . . . . . . . . . . . Assembly hardware (Phillips-head cams and dowels)
and panel hardware.
What’s Optional ?
Rear Rails . . . . . . . . . . . . Rear rails can be mounted to pre-drilled holes in laminate panels to provide extra support. Printed RU
scale expedites installation (LLR-RRT Series).
Certification & Compliance
EIA/TIA
COMPLIANT
Technical
FRONT
REAR
Fixed-position
front rails
remain in the
fully forward
position
TOP
Cams and
dowels install
from the
inside
Racking
Space
LLR-2118-B
BASE
Rear is
prepped for
optional
rails
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Usable
Depth*
Overall
Width
Mounting
Rails
Rear Mtg
Rails (pr)
Velcro Cable
Wraps
LLR-1018-B
18.00”
10U
18.90”
17.50”
20.41”
1 pr
LLR-RRT-10
VCW-12
LLR-1218-B
18.00”
12U
22.40”
17.50”
20.41”
1 pr
LLR-RRT-12
VCW-12
LLR-1618-B
18.00”
16U
29.40”
17.50”
20.41”
1 pr
LLR-RRT-16
VCW-12
LLR-2118-B
18.00”
21U
38.15”
17.50”
20.41”
1 pr
LLR-RRT-21
VCW-12
*Front rails are set back 0.5”
15
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
GANGABLE
LGR GANGABLE RACK
Application
The LGR is engineered for multibay applications where routing cable bundles
among multiple racks is of primary importance. The open design features a variety of conveniently spaced holes for lacing and wiring.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (14-ga. base),
reinforced at all load-bearing junctions. Load capacity 3150 lbs. Beveled corners.
Black wrinkle powder epoxy finish.
LGR-4432
What’s Included ?
Configurable Top . . . . . . Integral top rails (tapped 10-32) mount steel closure
panels (included as shipping stiffeners) or optional
19”W accessories.
Open Base . . . . . . . . . . . . Base features a grounding stud and threaded inserts
for optional leg levelers (pg. 72). The hole pattern is
ready to mount an optional platform base or anchor
bolts (not included).
Open Front. . . . . . . . . . . . Front has vents at top and bottom, and is prepped to
mount an optional front door (left or right).
Rear Door . . . . . . . . . . . . The rear door is recessed and has vents at top and
bottom. Includes handle and keyed lock. Mounts left
or right (field changeable).
Open Sides . . . . . . . . . . . Multiple openings for cable runs between racks.
Adjustable Rails . . . . . . . Mounting rails (tapped 10-32) can be repositioned
anywhere along side rail supports. Quantity of rails
and rail supports varies with rack size. Printed RU
scale facilitates gear-mounting.
Cable Management . . . . . Sides of frame and base feature multiple lacing points
and cable pass-through holes. Rear has removable
knockout panels with combination knockouts above
and below door. Top has combination knockouts for
conduit and BNC wireless antennas.
Thermal Management. . . Front vents. Top accepts optional 19”W fan panels (pg.
64) or optional vent panels (pg. 67). Rear door vents
accept optional single fan kit (pg. 64).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid, fully-vented, or smoked plexiglass.
(LFD Series).
Side Panels . . . . . . . . . . . Solid steel side panels without vents include recessed
handle pockets (SDP Series).
Additional Rails . . . . . . . Rails mount anywhere along side rail supports
(RRD Series).
Platform Base . . . . . . . . . Mobile or stationary base (LMB and LSB Series).
Rackware® Accessories . Utility drawers, fan panels, cable managers, etc. can
be found in the accessories section (pg. 58).
Ordering Flexibility
Omit Rear Door . . . . . . . This rack can be ordered without a rear door by
adding “LRD” as a suffix to the model number
(e.g. LGR-4032-LRD).
Upgrade Ventilation . . . . Omit the standard rear door, then order a fully-vented
rear door separately (LRD-FV Series, pg. 66).
Certification & Compliance
EIA/TIA
COMPLIANT
16
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
TOP
FRONT
Ships ready
to mount
optional front
door left or
right
Combination
knockouts
SIDE (Interior)
Removable
knockout
panels
above and
below rear
door
Quantity of
rails and
supports
varies with
rack height
Integral top
rails tapped
10-32
Multiple BNC
knockout
points for
UHF/VHF
wireless
antennas
Racking
Space
BASE
Grounding
stud
Multiple
points for
cable passthrough
Rear door
vents at
top and
bottom
LGR-4442
Integral
rails
tapped
10-32
REAR
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
Side panels for 32”, 36” and 42” deep racks consist of two pieces per side. Bases may increase overall rack height significantly. All LGR racks may be ordered without a rear
door by adding “LRD” as a suffix to the model number (e.g. LGR-4032-LRD). See online spec sheets for information.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
Overall
Width
Mtg
Rails
Rear
Door
Top
Solid
Fully-vented
Opening Front Door Front Door
Plexiglass
Front Door
Side
Panels (pr)
Add’l Mtg
Rails (pr)
LGR-4022
22.00”
40U
76.13”
19.34”
23.06”
1 pr
Vented
7U
LFD-40
LGR-4422
22.00”
44U
83.13”
19.34”
23.06”
1 pr
Vented
7U
LFD-44
LGR-2427
27.00”
24U
48.13”
24.34”
23.06”
2 pr
Vented
7U
LGR-3527
27.00”
35U
67.38”
24.34”
23.06”
2 pr
Vented
7U
LGR-4027
27.00”
40U
76.13”
24.34”
23.06”
2 pr
Vented
LGR-4427
27.00”
44U
83.13”
24.34”
23.06”
2 pr
LGR-3532
32.00”
35U
67.38”
29.34”
23.06”
LGR-4032
32.00”
40U
76.13”
29.34”
23.06”
LGR-4432
32.00”
44U
83.13”
29.34”
LGR-4036
36.00”
40U
76.13”
Mobile
Base
Stationary
Base
LFD-40FV
LFD-40P
SDP-4022
RRD-40
LMSB-22 LSB-22
LFD-44FV
LFD-44P
SDP-4422
RRD-44
LMSB-22 LSB-22
LFD-24
LFD-24FV
LFD-24P
SDP-2427
RRD-24
LMB-27
LSB-27
LFD-35
LFD-35FV
LFD-35P
SDP-3527
RRD-35
LMB-27
LSB-27
7U
LFD-40
LFD-40FV
LFD-40P
SDP-4027
RRD-40
LMB-27
LSB-27
Vented
7U
LFD-44
LFD-44FV
LFD-44P
SDP-4427
RRD-44
LMB-27
LSB-27
2 pr
Vented
10U
LFD-35
LFD-35FV
LFD-35P
SDP-3532*
RRD-35
LMB-32
LSB-32
2 pr
Vented
10U
LFD-40
LFD-40FV
LFD-40P
SDP-4032*
RRD-40
LMB-32
LSB-32
23.06”
2 pr
Vented
10U
LFD-44
LFD-44FV
LFD-44P
SDP-4432*
RRD-44
LMB-32
LSB-32
33.34”
23.06”
2 pr
Vented
10U
LFD-40
LFD-40FV
LFD-40P
SDP-4036*
RRD-40
LMB-36
LSB-36
LGR-4436
36.00”
44U
83.13”
33.34”
23.06”
2 pr
Vented
10U
LFD-44
LFD-44FV
LFD-44P
SDP-4436*
RRD-44
LMB-36
LSB-36
LGR-4042
42.00”
40U
76.13”
39.34”
23.06”
2 pr
Vented
10U
LFD-40
LFD-40FV
LFD-40P
SDP-4042*
RRD-40
LMB-42
LSB-42
LGR-4442
42.00”
44U
83.13”
39.34”
23.06”
2 pr
Vented
10U
LFD-44
LFD-44FV
LFD-44P
SDP-4442*
RRD-44
LMB-42
LSB-42
*Side panels for 32”, 36” and 42” deep racks are split for maneuverability; one pair consists of four pieces.
17
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LGNR NARROW GANGABLE RACK
Application
The LGNR is engineered for multibay applications where routing cable bundles
among multiple racks is of primary importance. The open design features a variety
of holes for lacing and wiring. This rack features the broadcast standard 22” width.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (14-ga. top and
base), reinforced at all load-bearing junctions. Load capacity 3150 lbs. Beveled
corners. Black wrinkle powder epoxy finish.
What’s Included ?
Configurable Top . . . . . . Integral top rails (tapped 10-32) mount steel closure
panels (included as shipping stiffeners) or optional
19”W accessories.
Open Base . . . . . . . . . . . . Base features a grounding stud and threaded inserts
for optional leg levelers (pg. 72). The hole pattern is
ready to mount an optional platform base or anchor
bolts (not included).
Open Front. . . . . . . . . . . . Front is prepped to mount an optional surface-mount
front door (left or right).
Rear Door . . . . . . . . . . . . The solid steel rear door is recessed. Includes handle
and keyed lock. Mounts left or right (field changeable).
Open Sides . . . . . . . . . . . Bottom openings for cable runs between racks.
Adjustable Rails . . . . . . . Two pairs of 11-gauge steel rails with mounting holes
tapped 10-32 and rack unit increments printed on
E.I.A. spacing.
Cable Management . . . . . Rear has BNC knockouts for UHF/VHF antennas, removable panels and combination knockouts above and
below door. Base features cable pass-through holes.
Thermal Management. . . Top accepts optional 19”W fan panels (pg. 64) or optional vent panels (pg. 67).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
LGNR 4432
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid, fully-vented, or smoked plexiglass.
(LFD Series in chart at right).
Rear Door . . . . . . . . . . . . Fully-vented steel rear door (LRND-40FV or LRND44FV) with key lock for select 40U and 44U racks
(order rack without standard rear door, then order this
door separately, see chart at right).
Side Panels . . . . . . . . . . . Solid steel side panels (SDP Series).
Platform Base . . . . . . . . . Mobile base (LMNB Series).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Ordering Flexibility
Omit Rear Door . . . . . . . Select 40U and 44U racks can be ordered without a
rear door. See chart.
Upgrade Ventilation . . . . Omit the standard rear door on select 40U and 44U
racks, then order a fully-vented rear door separately
(LRND-40FV or LRND-44FV).
Certification & Compliance
EIA/TIA
COMPLIANT
18
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
FRONT
Ships ready
to mount
optional front
door left or
right
Integral
rails
tapped
10-32
SIDE
REAR
TOP
Multiple
BNC
knockout
points for
UHF/VHF
wireless
antennas
Quantity of
rails and
supports
varies with
rack height
Integral top
rails tapped
10-32
Racking
Space
Solid rear
door
BASE
LGNR-4436
Grounding
stud
Combination
knockouts above
and below rear
door
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg.
58. Bases may increase overall rack height significantly. See online spec sheets for information.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
Overall
Width
Mtg
Rails
Rear
Door
Solid
Fully-vented
Front Door Front Door
Plexiglass
Front Door
Side
Panels (pr)
Add’l Mtg
Rails (pr)
Mobile
Base
Fully-vented
Rear Door
LGNR-2427
27.00”
24U
48.13”
24.34”
22.00”
2 pr
Solid
LFD-24
LGNR-3727
27.00”
37U
70.88”
24.34”
22.00”
2 pr
Solid
LFD-37
LFD-24FV
LFD-24P
SDP-2427
RRN-24
LMNB-27
---
LFD-37FV
LFD-37P
SDP-3727
RRN-37
LMNB-27
---
LGNR-4027
27.00”
40U
76.13”
24.34”
22.00”
2 pr
Solid
LGNR-4427
27.00”
44U
83.13”
24.34”
22.00”
2 pr
Solid
LFD-40
LFD-40FV
LFD-40P
SDP-4027
RRN-40
LMNB-27
---
LFD-44
LFD-44FV
LFD-44P
SDP-4427
RRN-44
LMNB-27
LGNR-4427-LRD 27.00”
44U
83.13”
24.34”
22.00”
2 pr
---
---
LFD-44
LFD-44FV
LFD-44P
SDP-4427
RRN-44
LMNB-27
LRND-44FV
LGNR-2432
32.00”
24U
48.13”
29.34”
22.00”
2 pr
Solid
LFD-24
LFD-24FV
LFD-24P
SDP-2432
RRN-24
LMNB-32
---
LGNR-3732
32.00”
37U
70.88”
29.34”
LGNR-4032
32.00”
40U
76.13”
29.34”
22.00”
2 pr
Solid
LFD-37
LFD-37FV
LFD-37P
SDP-3732*
RRN-37
LMNB-32
---
22.00”
2 pr
Solid
LFD-40
LFD-40FV
LFD-40P
SDP-4032*
RRN-40
LMNB-32
LGNR-4432
32.00”
44U
83.13”
---
29.34”
22.00”
2 pr
Solid
LFD-44
LFD-44FV
LFD-44P
SDP-4432*
RRN-44
LMNB-32
LGNR-4432-LRD 32.00”
44U
---
83.13”
29.34”
22.00”
2 pr
---
LFD-44
LFD-44FV
LFD-44P
SDP-4432*
RRN-44
LMNB-32
LRND-44FV
LGNR-4036
36.00”
40U
76.13”
33.34”
22.00”
2 pr
Solid
LFD-40
LFD-40FV
LFD-40P
SDP-4036*
RRN-40
LMNB-36
---
LGNR-4036-LRD 36.00”
40U
76.13”
33.34”
22.00”
2 pr
---
LFD-40
LFD-40FV
LFD-40P
SDP-4036*
RRN-40
LMNB-36
LRND-40FV
LGNR-4436
36.00”
44U
83.13”
33.34”
22.00”
2 pr
Solid
LFD-44
LFD-44FV
LFD-44P
SDP-4436*
RRN-44
LMNB-36
---
LGNR-4436-LRD 36.00”
44U
83.13”
33.34”
22.00”
2 pr
---
LFD-44
LFD-44FV
LFD-44P
SDP-4436*
RRN-44
LMNB-36
LRND-44FV
*Side panels for 32” and 36” deep racks are split for maneuverability; one pair consists of four pieces.
19
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LGTR TALL GANGABLE RACK
Application
The LGTR is engineered for multibay applications where routing cable bundles
among multiple racks is of primary importance. The open design features a variety of holes for lacing and wiring. An extra tall rack takes advantage of areas with
high ceilings.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (14-ga. top and
base), reinforced at all load-bearing junctions. Load capacity 3150 lbs. Beveled
corners. Black wrinkle powder epoxy finish.
What’s Included ?
54U TALL
Configurable Top . . . . . . Integral top rails (tapped 10-32) mount steel closure
panels (included as shipping stiffeners) or optional
19”W accessories.
Open Base . . . . . . . . . . . . Base features a grounding stud, threaded inserts for
optional leg levelers (pg. 72), and provisions to add
anchor bolts (not included).
Open Front. . . . . . . . . . . . Front is prepped to mount an optional surface-mount
front door (left or right).
Rear Door . . . . . . . . . . . . The solid steel rear door is recessed. Includes handle
and keyed lock. Mounts left or right (field changeable).
Open Sides . . . . . . . . . . . Bottom openings for cable runs between racks.
Adjustable Rails . . . . . . . Two pairs of 11-gauge steel rails with mounting holes
tapped 10-32 and rack unit increments printed on
E.I.A. spacing.
Cable Management . . . . . Rear has BNC knockouts for UHF/VHF antennas, removable panels and combination knockouts above and
below door. Base features cable pass-through holes.
Thermal Management. . . Top accepts optional 19”W fan panels (pg. 64) or optional vent panels (pg. 67).
Hardware . . . . . . . . . . . . . PilotPoint™ screws with captive washers.
LGTR-5432
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount, solid front door with keyed lock
mounts left or right. (LFD-54).
Rear Door . . . . . . . . . . . . Fully-vented steel rear door (LRND-54FV) with key
lock (order rack without standard rear door, then order
this door separately).
Side Panels . . . . . . . . . . . Solid steel side panels (SDP Series). Panels are split
for maneuverability.
Additional Rails . . . . . . . Rack rails sold in pairs (RRNT-54).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Ordering Flexibility
Omit Rear Door . . . . . . . Rack can be ordered without a rear door by adding
“LRD” as a suffix to the model number (e.g. LGTR5432-LRD).
Upgrade Ventilation . . . . Omit the standard rear door, then order a fully-vented
rear door separately (LRND-54FV).
Certification & Compliance
EIA/TIA
COMPLIANT
20
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
FRONT
SIDE (with cutaway)
REAR
Ships ready
to mount
optional front
door left or
right
Integral
rails
tapped
10-32
TOP
Multiple
BNC
knockout
points for
UHF/VHF
wireless
antennas
Integral
top rails
tapped
10-32
Solid rear
door
Racking
Space
BASE
Grounding
stud
LGTR-5436
Combination
knockouts
above and
below rear
door
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg.
58. Side panels consist of two pieces per side. See online spec sheets for information.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
Overall
Width
Mtg
Rails
Rear
Door
Solid
Front Door
Side
Panels (pr)
Add’l Mtg
Rails (pr)
Fully-vented
Rear Door
LGTR-5432
32.00”
54U
100.62”
29.34”
22.00”
2 pr
Solid
LFD-54
SDP-5432
RRNT-54
---
LGTR-5432-LRD
32.00”
54U
100.62”
29.34”
22.00”
2 pr
---
LFD-54
SDP-5432
RRNT-54
LRND-54FV
LGTR-5436
36.00”
54U
100.62”
33.34”
22.00”
2 pr
Solid
LFD-54
SDP-5436
RRNT-54
---
LGTR-5436-LRD
36.00”
54U
100.62”
33.34”
22.00”
2 pr
---
LFD-54
SDP-5436
RRNT-54
LRND-54FV
NOTE: Side panels are split for maneuverability; one pair consists of four pieces.
21
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LGVR GANGABLE VIDEO RACK
Application
The LGVR is engineered for multibay applications where routing cable bundles
among multiple racks is of primary importance. The open design features side lacing bars for video cable bundles.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (14-ga. base),
reinforced at all load-bearing junctions. Static load capacity 3150 lbs. Beveled
corners. Black wrinkle powder epoxy finish.
What’s Included ?
Configurable Top . . . . . . Integral top rails (tapped 10-32) mount steel closure
panels (included as shipping stiffeners) or optional
19”W accessories.
Open Base . . . . . . . . . . . . Base features a grounding stud and threaded inserts
for optional leg levelers (pg. 72). The hole pattern is
ready to mount an optional platform base or anchor
bolts (not included).
Open Front. . . . . . . . . . . . Front is prepped to mount an optional surface-mount
front door (left or right).
Rear Door . . . . . . . . . . . . Solid steel recessed rear door with keyed lock.
Mounts left or right (field changeable).
Open Sides . . . . . . . . . . . Side lacing bars for cable runs between racks.
Adjustable Rails . . . . . . . Two pairs of 11-gauge steel rails with mounting holes
tapped 10-32 and rack unit increments printed on
E.I.A. spacing.
Cable Management . . . . . Rear has BNC knockouts for UHF/VHF antennas and
removable knockout panels above and below door.
Base features cable pass-through holes.
Thermal Management. . . Top accepts optional 19”W fan panels (pg. 64) or optional vent panels (pg. 67).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
LGVR 4432
Front Door . . . . . . . . . . . . Solid steel surface-mount front door with keyed lock
mounts left or right. (LFD Series).
Side Panels . . . . . . . . . . . Solid steel side panels (SDP Series). Panels are split
for maneuverability.
Additional Rails . . . . . . . Rack rails sold in pairs (RRN-44).
Platform Base . . . . . . . . . Mobile base (LMNB Series).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Ordering Flexibility
Omit Rear Door . . . . . . . Rack can be ordered without a rear door by adding
“LRD” as a suffix to the model number (e.g. LGVR4432-LRD).
Certification & Compliance
EIA/TIA
COMPLIANT
The LGVR features side
lacing bars for cable bundles,
and can be ordered with an
optional fully-vented rear
door (shown here).
22
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
FRONT
Ships ready
to mount
optional front
door left or
right
SIDE
REAR
Integral
rails
tapped
10-32
TOP
Multiple
BNC
knockout
points for
UHF/VHF
wireless
antennas
Side lacing
bars for
video cable
bundles
Integral top
rails tapped
10-32
Racking
Space
Solid rear
door
BASE
Grounding
stud
LGVR-4436
Combination
knockouts
above and
below rear
door
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg.
58. Side panels consist of two pieces per side. Bases may increase overall rack height significantly. See online spec sheets for information.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
LGVR-4432
32.00”
44U
83.13”
29.34”
LGVR-4432-LRD
32.00”
44U
83.13”
29.34”
Overall
Width
Mtg
Rails
Rear
Door
Fully-vented
Solid
Rear Door Front Door
Fully-vented
Front Door
Plexiglass
Front Door
Side
Panels (pr)
Add’l Mtg
Rails (pr)
Mobile
Base
22.00”
2 pr
Solid
---
LFD-44
LFD-44FV
LFD-44P
SDP-4432
RRN-44
LMNB-32
22.00”
2 pr
---
LRND-44FV
LFD-44
LFD-44FV
LFD-44P
SDP-4432
RRN-44
LMNB-32
LGVR-4436
36.00”
44U
83.13”
33.34”
22.00”
2 pr
Solid
---
LFD-44
LFD-44FV
LFD-44P
SDP-4436
RRN-44
LMNB-36
LGVR-4436-LRD
36.00”
44U
83.13”
33.34”
22.00”
2 pr
---
LRND-44FV
LFD-44
LFD-44FV
LFD-44P
SDP-4436
RRN-44
LMNB-36
NOTE: Side panels are split for maneuverability; one pair consists of four pieces.
23
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LSGR SEISMIC-CERTIFIED GANGABLE RACK
Application
The LSGR seismic-certified gangable rack is Professional Engineer (P.E.) certified
for two categories of seismic qualifications. Download document packages for
IBC, CBC and OSHPD online (lowellmfg.com).
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel with X-style
side-frame construction, a 14-ga. steel bottom with welded brackets in each corner, reinforced at all load-bearing junctions. Beveled front and rear corners. Black
powder epoxy finish.
What’s Included ?
LSGR 4432
Configurable Top . . . . . . Integral top rails (tapped 10-32) mount steel closure
panels (included as shipping stiffeners) or optional
19”W accessories.
Open Base . . . . . . . . . . . . Base features a grounding stud and hole pattern
ready to mount anchor bolts (not included).
Open Front. . . . . . . . . . . . Front has vents at top and bottom, and is prepped to
mount an optional front door (left or right).
Rear Door . . . . . . . . . . . . The rear door is recessed and has vents at top and
bottom. Includes handle and keyed lock. Mounts left
or right (field changeable).
Open Sides . . . . . . . . . . . Seamless X-frame construction with multiple side
openings for cable runs between racks.
Adjustable Rails . . . . . . . Mounting rails (tapped 10-32) can be repositioned
anywhere along side rail supports. Quantity of rails
and rail supports varies with rack size. Printed RU
scale facilitates gear-mounting.
Cable Management . . . . . Sides of frame and base feature multiple lacing points
and cable pass-through holes. Rear has removable
knockout panels and combination knockouts. Top has
combination knockouts for conduit and BNC wireless
antennas.
Thermal Management. . . Front vents. Top accepts optional 19”W fan panels (pg.
64) or optional vent panels (pg. 67). Rear door vents
accept optional single fan kit (pg. 64).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid, fully-vented, or smoked plexiglass.
(LFD Series).
Side Panels . . . . . . . . . . . Solid steel side panels (without vents) include
recessed handles (SDP Series).
Additional Rails . . . . . . . Rails mount anywhere along side rail supports
(RRD Series).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Certification & Compliance
EIA/TIA
COMPLIANT
The LSGR has welded corner
brackets and holes for anchoring
(bolts not included).
24
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Seismic Qualifications
The LSGR seismic-certified gangable rack is Professional Engineer (P.E.) certified to meet or exceed the seismic design requirements as specified in the 2009 International Building Code (IBC), Section 1613; the 2010 California Building Code (CBC), Section
1613; and California’s Office of Statewide Health Planning and Development (OSHPD)
1. Racks identified as part of a Life Safety/Essential System (lp = 1.5). These racks are so designated and required in
critical or essential facilities where operation and function following a major earthquake event is necessary. See IBC and
CBC document packages.
2. Racks requiring seismic design ‘Anchorage’ by code (lp = 1.0), but are NOT identified as a Life Safety/Essential System.
These racks only require their supports and attachments; i.e., anchorage, to be seismically qualified and certified. See IBC,
CBC and OSHPD document packages.
Technical
FRONT
SIDE
REAR
Removable
knockout
panels
above and
below rear
door
Seamless
X-style
side
frame
Ships
ready to
mount
optional
front door
TOP
Combination
knockouts
Integral
top rails
tapped
10-32
Multiple BNC
knockout
points for
UHF/VHF
wireless
antennas
Racking
Space
Integral
rails
tapped
10-32
LSGR 4432
BASE
Seismic bases
include welded
bracket reinforcements in
each corner
and holes for
anchoring
(bolts not included)
Rear door
vents at
top and
bottom
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg.
58. See online spec sheets for information.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Useable
Depth
Overall
Width
Mtg
Rails
Rear
Door
Solid
Front Door
Fully-vented
Front Door
Plexiglass
Front Door
Side
Panels (pr)
Add’l Mtg
Rails (pr)
LSGR-4027
27.00”
40U
76.13”
24.34”
23.06”
2 pr
Vented
LFD-40
LFD-40FV
LFD-40P
SDP-4027
RRD-40
LSGR-4427
27.00”
44U
83.13”
24.34”
23.06”
2 pr
Vented
LFD-44
LFD-44FV
LFD-44P
SDP-4427
RRD-44
LSGR-4032
32.00”
40U
76.13”
29.34”
23.06”
2 pr
Vented
LFD-40
LFD-40FV
LFD-40P
SDP-4032*
RRD-40
LSGR-4432
32.00”
44U
83.13”
29.34”
23.06”
2 pr
Vented
LFD-44
LFD-44FV
LFD-44P
SDP-4432*
RRD-44
LSGR-4036
36.00”
40U
76.13”
33.34”
23.06”
2 pr
Vented
LFD-40
LFD-40FV
LFD-40P
SDP-4036*
RRD-40
LSGR-4436
36.00”
44U
83.13”
33.34”
23.06”
2 pr
Vented
LFD-44
LFD-44FV
LFD-44P
SDP-4436*
RRD-44
*Side panels for 32” and 36” deep racks are split for maneuverability; one pair consists of four pieces.
25
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
PORTABLE
LPR PORTABLE RACK
Application
The LPR portable rack has heavy duty swivel casters and is ideal for schools and
similar facilities in need of mobile security for electronics. Includes front and rear
doors with keyed locks.
Construction
Made in the U.S.A. with fully welded 16-ga. certified U.S. steel (14-ga. bottom),
reinforced at all load-bearing junctions. Load capacity 900 lbs. Beveled corners
in front and rear. Black wrinkle powder epoxy finish.
What’s Included ?
LPR-2427
Top . . . . . . . . . . . . . . . . . . Solid steel top. Some models include a premium laminate top with Graphite Grey finish and rubber edge
molding (field mounted). See chart.
Base . . . . . . . . . . . . . . . . . Solid base with four heavy duty (4”) swivel casters,
two locking. Casters are field-mounted.
Front Door . . . . . . . . . . . . Includes surface-mount front door (1”D) with keyed
lock — choice of solid steel, fully-vented or smoked
plexiglass (see chart at right). Mounts left or right.
Rear Door . . . . . . . . . . . . Recessed rear door with top and bottom vents includes keyed lock.
Welded Sides . . . . . . . . . Welded sides feature top and bottom vents for passive ventilation and recessed handles.
Adjustable Rails . . . . . . . Includes one-pair of adj. mounting rails (tapped 1032) that can be repositioned anywhere along side rail
supports. Printed RU scale facilitates gear-mounting.
Cable Management . . . . . Removable knockout panels in rear have combination
knockouts for cables and BNC wireless antennas.
Thermal Management. . . Vents above and below front door. Side and rear door
vents (except 14U rack models) will accept optional
single fan kit (pg. 64).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Additional Rails . . . . . . . Rails mount anywhere along side rail supports. (RRD
Series in chart at right).
Power . . . . . . . . . . . . . . . . Power strips, surge protectors, etc. can be found online at lowellmfg.com with our full line of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Certification & Compliance
EIA/TIA
Graphite Grey laminate top (LGT Series)
included with some models can also be
ordered separately (pg. 67)
Made in
Missouri, USA
COMPLIANT
Technical
FRONT
Vents
above and
below front
door
SIDE
REAR
Side vents
(side varies
with rack
height)
Recessed
handles in
side panels
Rear door
vents at
top and
bottom
LPR-2427
Racking
Space
TOP
Removable
knockout
panels at
top and
bottom
Heavy duty
swivel casters
26
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Tiny indents in
steel top allow
mounting of
laminate top
(included with
some models)
Model Numbers
Model numbers listed within dotted lines represent commonly used options for this rack series; order separately. Additional accessories begin on pg. 58. A premium
laminate top is included with rack model numbers ending in “GT”. The top can be purchased separately for other models (LGT Series, pg. 67). See online spec sheets
for more information.
OPTIONAL
Rack
Model No.
Rack
Depth
Usable
Depth
Racking
Space
Rack
Height
Rack
Width
Laminate Top
Height
Laminate Top
Width
Laminate Top
Depth
Caster
Height
Front
Door*
Rear
Door
Add’l Mtg
Rails (pr)
Knockout
Panels (pr)
LPR-1422
22.00”
19.34”
14U
30.63”
23.06”
---
---
---
LPR-1422FV
22.00”
19.34”
14U
30.63”
23.06”
---
---
---
5.13”
Solid Steel
Vented
RRD-14
KOP-N
5.13”
Fully-vented
Vented
RRD-14
LPR-1422PGT
22.00”
19.34”
14U
30.63”
23.06”
1.00”
24.69”
KOP-N
24.25”
5.13”
Plexiglass
Vented
RRD-14
KOP-N
LPR-2122
22.00”
19.34”
21U
42.88”
23.06”
---
LPR-2122FV
22.00”
19.34”
21U
42.88”
23.06”
---
---
---
5.13”
Solid Steel
Vented
RRD-21
KOP-N
---
---
5.13”
Fully-vented
Vented
RRD-21
LPR-2122PGT
22.00”
19.34”
21U
42.88”
23.06”
KOP-N
1.00”
24.69”
24.25”
5.13”
Plexiglass
Vented
RRD-21
LPR-1427
27.00”
24.34”
14U
30.63”
23.06”
KOP-N
---
---
---
5.13”
Solid Steel
Vented
RRD-14
KOP-N
KOP-N
LPR-1427FV
27.00”
24.34”
14U
30.63”
23.06”
---
---
---
5.13”
Fully-vented
Vented
RRD-14
LPR-1427PGT
27.00”
24.34”
14U
30.63”
23.06”
1.00”
24.69”
29.06”
5.13”
Plexiglass
Vented
RRD-14
KOP-N
LPR-2127
27.00”
24.34”
21U
42.88”
23.06”
---
---
---
5.13”
Solid Steel
Vented
RRD-21
KOP-N
LPR-2127FV
27.00”
24.34”
21U
42.88”
23.06”
---
---
---
5.13”
Fully-vented
Vented
RRD-21
KOP-N
LPR-2127PGT
27.00”
24.34”
21U
42.88”
23.06”
1.00”
24.69”
29.06”
5.13”
Plexiglass
Vented
RRD-21
KOP-N
LPR-2427
27.00”
24.34”
24U
48.07”
23.06”
---
---
---
5.13”
Solid Steel
Vented
RRD-24
KOP-N
LPR-2427FV
27.00”
24.34”
24U
48.07”
23.06”
---
---
---
5.13”
Fully-vented
Vented
RRD-24
KOP-N
LPR-2427PGT
27.00”
24.34”
24U
48.07”
23.06”
1.00”
24.69”
29.06”
5.13”
Plexiglass
Vented
RRD-24
KOP-N
*Surface-mount front door adds 1” to rack depth.
LPR models ending
in “GT” come with a
plexiglass door and
premium laminate top
LPR-1422
27
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LPPR PORTABLE PRESENTATION RACK
Application
The LPPR ready-to-use portable presentation rack is ideal for schools, boardrooms and other facilities in need of mobile security for electronics. The premium
look includes a smoked plexiglass front door and Graphite Grey laminate top with
rounded corners and rubber edge molding.
Construction
Made in the U.S.A. with fully welded 16-ga. certified U.S. steel (14-ga. bottom),
reinforced at all load-bearing junctions. Load capacity 900 lbs. Beveled corners.
Black wrinkle powder epoxy finish.
LPPR-2432
What’s Included ?
Top . . . . . . . . . . . . . . . . . . Premium laminate top with rounded corners and rubber edge molding overhangs rack slightly. It mounts
in the field using tiny indents in steel top.
Base . . . . . . . . . . . . . . . . . Base platform with center opening sits flush to bottom
rack space and features a grounding stud. The 3”
casters raise rack 1.25”.
Front Door . . . . . . . . . . . . Includes surface-mount, smoked plexiglass front door
(1”D) with keyed lock. Mounts left or right.
Rear Door . . . . . . . . . . . . Recessed rear door features vents and keyed lock.
Welded Sides . . . . . . . . . Welded sides feature top and bottom vents for passive ventilation.
Adjustable Rails . . . . . . . Includes two-pair adj. mounting rails (tapped 10-32)
that can be repositioned anywhere along side rail
supports. Printed RU scale facilitates gear-mounting.
Cable Management . . . . . Removable knockout panels above and below rear
door have combination knockouts. Rear knockouts for
BNC wireless antennas. Center opening in base.
Thermal Management. . . Front vents at top and bottom. Rear door vents and
side vents will accept optional single fan kit (pg. 64).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Rackware® Accessories . Utility drawers, cable managers, etc. can be found in
the accessories section (pg. 58).
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
FRONT
REAR
SIDE
Removable
knockout
panels at
top and
bottom of
rear frame
Vents
above and
below front
door
Racking
Space
LPPR-2432
Side
vents at
top and
bottom
Model Number
Rack
Model No.
Rack
Depth
Depth with
Base & Top
Racking
Space
Rack
Height
Height with
Base & Top
Rack
Width
Width with
Base & Top
LPPR-2432
32.00”
34.06”
24U
48.13”
50.23”
23.06”
24.69”
28
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
LCDR CONFIGURED DESIGN RACK
Application
The LCDR configured design rack is an elegant, all-in-one enclosed rack made to
fit the high-end decor of executive boardrooms and home theatres.
Construction
Made in the U.S.A. with certified U.S. steel, 16-ga. welded frame reinforced at all
load-bearing junctions. Load capacity 500-1200 lbs. depending on rack height.
Charcoal grey textured epoxy finish.
What’s Included ?
LCDR-1824
Top . . . . . . . . . . . . . . . . . Solid top with vents and cable entry port with grommet.
Base . . . . . . . . . . . . . . . . . Open center, grounding stud and cable entry ports with
grommets.
Front Door . . . . . . . . . . . . Smoked grey tempered glass door with key lock and
inset handle can be adjusted to left or right hand swing.
Rear Access Cover . . . . . Removable rear access cover with keyed lock opens
from top. Keyed differently than front door.
Side Access Covers . . . . Removable side access covers with keyed locks open
from top. Keyed the same as rear access cover.
Adjustable Rails . . . . . . . Two-pair adj. rails with mounting holes tapped 10-32
and rack unit increments printed on EIA spacing.
Vented Shelves . . . . . . . . 2U steel shelves. See chart for quantity.
Blank Panels . . . . . . . . . . 2U steel panels. See chart for quantity.
Fans . . . . . . . . . . . . . . . . . Two whisper fans installed at top vents.
Casters .. . . . . . . . . . . . . . Four swivel casters (two locking).
Leg Levelers . . . . . . . . . . Four leg levelers.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
FRONT
(without door)
Front with
tempered
glass door
(smoked grey)
Solid top with two vent openings for
fans (included) plus cable entry port
with grommet for wire management.
TOP
FRONT
(with door)
Vents for
fan panel,
cable entry
port with
grommet
for wire
management
Racking
Height
BASE
SIDE
REAR
Four swivel
casters, four
leg levelers
and two
cable entry
ports with
grommets.
Removable
access covers
on rear and
sides with
keyed locks.
Interior includes shelves, blank
panels and whisper fans.
Model Numbers
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Overall
Width
Load
Capacity
Front
Door
Rear
Access Panel
Side
Access Panels
Vented
Shelves
Blank
Panels
Whisper
Fans
Swivel
Casters
Leg
Levelers
LCDR-1824
24.00”
18U
38.43”
22.31”
500 lbs.
Smoked Glass
1
2
3
3
2
4
4
LCDR-2724
24.00”
27U
54.18”
22.31”
750 lbs.
Smoked Glass
1
2
5
5
2
4
4
LCDR-3524
24.00”
35U
68.18”
22.31”
980 lbs.
Smoked Glass
1
2
7
7
2
4
4
LCDR-4224
24.00”
42U
80.43”
22.31”
1200 lbs.
Smoked Glass
1
2
9
9
2
4
4
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
29
BUILT-IN
LXR SLIM RACK
Application
The LXR is a slim 19.21” wide, which allows it to fit where a standard rack may
not, such as inside cabinetry or credenzas, but it also serves well as a freestanding floor rack. A variety of options allow multiple configurations—from the basic
open frame to a fully enclosed cabinet.
Construction
Made in the U.S.A. with 14-ga. steel top and base, 11-ga. steel corner post mounting
rails. Load capacity 400 lbs. Smooth black powder epoxy finish. Ships unassembled.
What’s Included ?
Top . . . . . . . . . . . . . . . . . . Steel with vents in top and front. Rear knockouts for
cables.
Base . . . . . . . . . . . . . . . . . Large center opening, front vents and rear knockouts
for cables.
Side Supports . . . . . . . . . Side support brackets included with models 30 rack
units and taller.
Corner Post Rails . . . . . . Four rails (tapped 10-32) will accept optional 19”W
accessories.
Hardware . . . . . . . . . . . . . Hex nuts and flat-head screws.
What’s Optional ?
Additional options are available for this rack series visit lowellmfg.com for more information.
Mobile Base. . . . . . . . . . . Skirted mobile base with standard or fine floor swivel
casters. Fine floor casters have rubber tread made to
protect wood, marble and tile. Increases rack height
4.25”. (LXR---MB Series).
Protective Runner Kit . . . Four plastic glides protect furniture when rack is
placed in cabinetry (No. PRK).
Cable Chase . . . . . . . . . . For 44U racks only, 3”W raceway for cable management (LXR---CC3 Series).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, etc. can be
found online at lowellmfg.com with our full line of
products.
Rackware® Accessories . 19”W or Zero-Space shelves, cable managers, etc.
can be found in the accessories section (pg. 58).
LXR-4426
Side support
brackets
included with
models 30U
and taller
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Compatible
Technical
FRONT
SIDE
BACK
Vents at
top and
bottom
Side support
brackets
included with
models 30U
and taller
LXR-4426
Racking
Space
TOP
Knockouts
at top and
base
30
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Vents
BASE
Center
opening
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Bases may increase overall rack
height significantly. To see additional options available for this rack series visit lowellmfg.com.
OPTIONAL
Racking
Space
Side
Brackets
Mobile Base
with standard
casters
21.00”
8U
---
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
21.00”
14U
---
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-2221
21.00”
22U
---
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-3021
21.00”
30U
2
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-3821
21.00”
38U
2
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-4421
21.00”
44U
2
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
LXR-4421CC3
PRK
LXR-826
26.25”
8U
---
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-1426
26.25”
14U
---
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-2226
26.25”
22U
---
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-3026
26.25”
30U
2
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-3826
26.25”
38U
2
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LXR-4426
26.25”
44U
2
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
LXR-4426CC3
PRK
Rack
Model No.
Overall
Depth
LXR-821
LXR-1421
Mobile Base
with fine floor
casters
Set of 4 Casters
(2 Standard,
2 Locking)
Set of 4
Fine Floor Casters
(2 Standard, 2 Locking)
Cable
Chase
Protective
Runner
Kit
31
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LVR SLIM RACK, VARIABLE DEPTH
Application
The LVR or VARI-RACK™ is made to adapt in the field, easily accommodating
changes in space allocation as the depth isn’t finalized until assembly. Corner
post rails are also adaptable with printed marks to guide field cuts should the
height need to be trimmed. The slim 19.21” width can fit where a standard rack
may not, such as inside cabinetry, credenzas or closets.
Construction
Made in the U.S.A. with 14-gauge steel top and base, 11-ga. steel corner post
mounting rails. Models 30 rack units and taller include two side support brackets.
Load capacity 400 lbs. Smooth black powder epoxy finish. Ships unassembled (top
and base are assembled except for depth selection). See chart for depth ranges.
What’s Included ?
Side support
brackets
included with
models 30U
and taller
Top / Base . . . . . . . . . . . . Depth can be pinned in RU increments or set anywhere along slot (scale shows inches and millimeters). See chart for depth settings. Top has knockout
panel with combination knockouts. Bottom has
obround opening for wires and cables.
Front. . . . . . . . . . . . . . . . . Vents for passive ventilation; Decora® cutouts with
covers at top and base to mount optional devices.
Back . . . . . . . . . . . . . . . . . Knockouts and vents at top and base.
Corner Post Rails . . . . . . Four rails (tapped 10-32) accept optional 19”W accessories. Printed rack unit scale facilitates gearmounting. Printed cut marks assist field trims.
Side Brackets . . . . . . . . . Racks 30U or taller include two side support brackets
for torsional rigidity (pictured at left).
Hardware . . . . . . . . . . . . . Hex nuts and flat-head screws.
What’s Optional ?
Additional options are available for this rack series visit lowellmfg.com for more information.
LVR44-2128
Mobile Base. . . . . . . . . . . Skirted mobile base with standard or fine floor swivel
casters. Fine floor casters have rubber tread made to
protect wood, marble and tile. Increases rack height
4.25”. (LXR---MB Series).
Swivel Casters. . . . . . . . . Set of four standard or fine floor swivel casters without
base (LXR-C3S Series).Two casters can be locking
by adding “L” suffix to model number.
Protective Runner Kit . . . Four plastic glides protect furniture when rack is
placed in cabinetry (No. PRK, pg. 72).
Cable Chase . . . . . . . . . . For 44U racks only, 3”W raceway for cable management (LXR---CC3 Series).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . 19”W or Zero-Space shelves, cable managers, etc.
can be found in the accessories section (pg. 58).
Certification & Compliance
EIA/TIA
COMPLIANT
Depth adjustment scale shows
inches, millimeters and rack units.
32
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Compatible
Technical
FRONT
BACK
Decora® cutout,
with cover for
optional devices
SIDE
TOP
Knockout
and vents
at top and
base
Combination
knockouts in
removable
knockout panel
BASE
Obround
opening
Racking
Space
LVR44-2128
Side support
brackets
included with
models 30U
and taller
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Bases may increase overall rack
height significantly. To see additional options available for this rack series visit lowellmfg.com.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Side
Brackets
Mobile Base
with standard
casters
Mobile Base
with fine floor
casters
Set of 4 Casters
(2 Standard,
2 Locking)
Set of 4
Fine Floor Casters
(2 Standard, 2 Locking)
Cable
Chase
Protective
Runner
Kit
LVR8-1421
14.00” - 21.00”
8U
---
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR14-1421
14.00” - 21.00”
14U
---
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR22-1421
14.00” - 21.00”
22U
---
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR30-1421
17.50” - 21.00”
30U
2
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR38-1421
17.50” - 21.00”
38U
2
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR44-1421
17.50” - 21.00”
44U
2
LXR-MB21
LXR-MB21F
LXR-C3SL
LXR-C3SFL
LXR-4421CC3
PRK
LVR8-2128
21.00” - 28.00”
8U
---
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR14-2128
21.00” - 28.00”
14U
---
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR22-2128
21.00” - 28.00”
22U
---
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR30-2128
21.00” - 28.00”
30U
2
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR38-2128
21.00” - 28.00”
38U
2
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
---
PRK
LVR44-2128
21.00” - 28.00”
44U
2
LXR-MB26
LXR-MB26F
LXR-C3SL
LXR-C3SFL
LXR-4426CC3
PRK
NOTE: Some options (e.g. mobile bases) would require the LVR to be set to a specific depth to accommodate them. Additional accessories for slim frame racks can be found online at lowellmfg.com.
33
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LCR CREDENZA RACK
Application
The LCR credenza rack is designed for maximum equipment load stored in
cabinetry or under a counter or desk. The heavy duty welded frame ships fully
assembled and ready to install.
Construction
Made in the U.S.A. with 16-gauge certified U.S. steel (11-ga. rails). Static load
capacity 250 lbs. Black semi-gloss powder epoxy finish.
What’s Included ?
LCR-1218
Open Top / Base . . . . . . . Features 14”W center opening and 0.25” diameter
holes in each corner. Two slots for anchoring and positioning. Grounding stud.
Open Sides . . . . . . . . . . . Full accessibility to mounted equipment.
Corner Post Rails . . . . . . Corner post mounting rails (tapped 10-32) are
punched on sides for clean wire tie-off and bundling.
Hardware . . . . . . . . . . . . . Panel mounting hardware included.
What’s Optional ?
Runner Kit. . . . . . . . . . . . Set of two plastic glides to protect cabinet surface
adds 0.25” to overall height.
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
®
Rackware Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Compatible
Technical
FRONT & REAR
SIDE
TOP & BASE
Corner post
rails tapped
10-32
Large center
opening in
top and base
Racking
Space
Side
cable
ports
Model Numbers
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Overall
Width
Corner Post
Mtg Rails
Load
Capacity
Runner
Kit
LCR-816
LCR-1016
16.00”
8U
14.94”
19.25”
4
250 lbs.
LCR-16RK
16.00”
10U
18.44”
19.25”
4
250 lbs.
LCR-16RK
LCR-1216
16.00”
12U
21.94”
19.25”
4
250 lbs.
LCR-16RK
LCR-1416
16.00”
14U
25.44”
19.25”
4
250 lbs.
LCR-16RK
LCR-818
18.00”
8U
14.94”
19.25”
4
250 lbs.
LCR-18RK
LCR-1018
18.00”
10U
18.44”
19.25”
4
250 lbs.
LCR-18RK
LCR-1218
18.00”
12U
21.94”
19.25”
4
250 lbs.
LCR-18RK
LCR-1418
18.00”
14U
25.44”
19.25”
4
250 lbs.
LCR-18RK
34
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
LPOR PULL-OUT RACK
Application
The LPOR is designed for electronics placed in a cabinet, closet or custom millwork. The rack slides straight forward to provide access to the rear of equipment, cables and wiring.
Construction
Made in the U.S.A. with 14-gauge certified U.S. steel base and 11-ga. corner
post rails. Smooth black powder epoxy finish. Ships unassembled.
Base . . . . . . . . . . . . . . . . . Base can be mounted flush or recessed up to 2” in
boxed wall or cabinetry. Available with 2 or 4 slides
for different load capacities.
Open Front. . . . . . . . . . . . Front includes a vent panel, which can be placed
anywhere along front mounting rails, and a vented
security panel for base. Remove security panel to
slide rack forward to service position.
Corner Post Rails . . . . . . Corner rails (tapped 10-32) feature RU scale to facilitate gear-mounting. Height of front rails varies
with rack height. Rear rails are 7U.
Cable Management . . . . . Three integral cable lacing bars in rear.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
LPOR2-1619
What’s Included ?
Front security panel
installs with screws to
secure base from
unauthorized access.
Base slides straight forward permitting access
to rear of equipment,
wiring and cables. For a
rotating pull-out (LPTR
pull & turn) rack see next
page.
What’s Optional ?
Rackware® Accessories . Shelves (LPTR-NS), cable managers, etc. can be
found in the accessories section (pg. 58).
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Compatible
Technical
FRONT
SIDE (Extended)
BASE
Holes for
ventilation
REAR
Three lacing
bars in rear
LPOR4-2119
Racking
Space
SIDE
1U vented
panel, shipped
with rack, can
be placed anywhere along
mounting rails
Model Numbers
Model numbers listed within dotted lines represent commonly used option for this rack series; order separately. Additional accessories begin on pg. 58.
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Overall
Width
Lacing
Bars
Bottom Rails
(slides)
Load
Capacity
OPTIONAL
LPOR2-719
19.22”
7U
14.12”
19.06”
3
2
125 lbs.
LPTR-NS
LPOR2-1019
19.22”
10U
19.37”
19.06”
3
2
125 lbs.
LPTR-NS
LPOR2-1219
19.22”
12U
22.87”
19.06”
3
2
125 lbs.
LPTR-NS
LPOR2-1419
19.22”
14U
26.37”
19.06”
3
2
125 lbs.
LPTR-NS
LPOR2-1619
19.22”
16U
29.87”
19.06”
3
2
125 lbs.
LPTR-NS
LPOR2-2119
19.22”
21U
38.62”
19.06”
3
2
125 lbs.
LPTR-NS
LPOR4-719
19.22”
7U
14.12”
19.06”
3
4
250 lbs.
LPTR-NS
LPOR4-1019
19.22”
10U
19.37”
19.06”
3
4
250 lbs.
LPTR-NS
LPOR4-1219
19.22”
12U
22.87”
19.06”
3
4
250 lbs.
LPTR-NS
LPOR4-1419
19.22”
14U
26.37”
19.06”
3
4
250 lbs.
LPTR-NS
LPOR4-1619
19.22”
16U
29.87”
19.06”
3
4
250 lbs.
LPTR-NS
LPOR4-2119
19.22”
21U
38.62”
19.06”
3
4
250 lbs.
LPTR-NS
35
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LPTR PULL & TURN RACK
Application
The LPTR offers easy access to equipment stored in cabinetry or custom
millwork as it slides forward and rotates, left or right, locking at 60˚ or 90˚.
Construction
Made in the U.S.A. with 14-gauge certified U.S. steel base and 11-ga. corner
post rails. Smooth black powder epoxy finish. Ships unassembled.
What’s Included ?
LPTR2-2119
Base . . . . . . . . . . . . . . . . . Base can be mounted flush or recessed up to 1.75”.
Includes side supports and integral turntable.
Open Front. . . . . . . . . . . . Front has a vented panel on top and vented security panel on base. Remove security panel to
slide rack forward to service position.
Corner Post Rails . . . . . . Rails are tapped 10-32 and feature a printed RU
scale for easy set-up. Taller racks (24U+) include
side braces for additional stability.
Cable Management . . . . . Six integral cable lacing bars.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
Base slides
forward and
rack rotates,
left or right, on
turntable base.
LPTR2 shown
with optional top
(No. LPTR-TC)
What’s Optional ?
Top . . . . . . . . . . . . . . . . . . Steel top with black finish protects mounted
equipment (LPTR-TC).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers,
etc. can be found online at lowellmfg.com with
our full line of products.
Rackware® Accessories . Shelves (LPTR-NS), cable managers, etc. can be
found in the accessories section (pg. 58).
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
FRONT
1U vented panel,
shipped with rack,
can be placed
anywhere along
mounting rails
SIDE
BASE
Six lacing
bars in
rear
Holes for
ventilation
LPTR4-2119
Racking
Space
Bottom
security
panel
Rack Rotation
Remove security panel to slide rack forward and turn to the service position.
Lock engages at 60˚ or 90˚ (push button release).
36
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Compatible
Model Numbers
Model numbers listed within dotted lines represent commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
Rack
Model No.
Overall
Depth
Racking
Space
Usable
Depth
Overall
Height
Overall
Width
Lacing
Bars
Bottom Rails
(slides)
Load
Capacity
LPTR2-1019
19.22”
10U
19.00”
20.08”
19.13”
6
2
125 lbs.
LPTR-TC
LPTR-NS
LPTR2-1219
19.22”
12U
19.00”
23.58”
19.13”
6
2
125 lbs.
LPTR-TC
LPTR-NS
OPTIONAL
LPTR2-1419
19.22”
14U
19.00”
27.08”
19.13”
6
2
125 lbs.
LPTR-TC
LPTR-NS
LPTR2-1619
19.22”
16U
19.00”
30.58”
19.13”
6
2
125 lbs.
LPTR-TC
LPTR-NS
LPTR2-2119
19.22”
21U
19.00”
39.33”
19.13”
6
2
125 lbs.
LPTR-TC
LPTR-NS
LPTR2-2419
19.22”
24U
19.00”
44.58”
19.13”
6
2
125 lbs.
LPTR-TC
LPTR-NS
LPTR4-1019
19.22”
10U
19.00”
20.08”
19.13”
6
4
250 lbs.
LPTR-TC
LPTR-NS
LPTR4-1219
19.22”
12U
19.00”
23.58”
19.13”
6
4
250 lbs.
LPTR-TC
LPTR-NS
LPTR4-1419
19.22”
14U
19.00”
27.08”
19.13”
6
4
250 lbs.
LPTR-TC
LPTR-NS
LPTR4-1619
19.22”
16U
19.00”
30.58”
19.13”
6
4
250 lbs.
LPTR-TC
LPTR-NS
LPTR4-2119
19.22”
21U
19.00”
39.33”
19.13”
6
4
250 lbs.
LPTR-TC
LPTR-NS
LPTR4-2419
19.22”
24U
19.00”
44.58”
19.13”
6
4
250 lbs.
LPTR-TC
LPTR-NS
LPTR4-2819
19.22”
28U
19.00”
51.58”
19.13”
6
4
250 lbs.
LPTR-TC
LPTR-NS
LPTR4-3019
19.22”
30U
19.00”
55.08”
19.13”
6
4
250 lbs.
LPTR-TC
LPTR-NS
LPTR-NS
LPTR4-1023
23.23”
10U
23.00”
20.08”
19.13”
6
4
200 lbs.
LPTR-TC
LPTR4-1223
23.23”
12U
23.00”
23.58”
19.13”
6
4
200 lbs.
LPTR-TC
LPTR-NS
LPTR4-1423
23.23”
14U
23.00”
27.08”
19.13”
6
4
200 lbs.
LPTR-TC
LPTR-NS
LPTR4-1623
23.23”
16U
23.00”
30.58”
19.13”
6
4
200 lbs.
LPTR-TC
LPTR-NS
LPTR4-2123
23.23”
21U
23.00”
39.33”
19.13”
6
4
200 lbs.
LPTR-TC
LPTR-NS
LPTR4-2423
23.23”
24U
23.00”
44.58”
19.13”
6
4
200 lbs.
LPTR-TC
LPTR-NS
LPTR4-2823
23.23”
28U
23.00”
51.58”
19.13”
6
4
200 lbs.
LPTR-TC
LPTR-NS
LPTR4-3023
23.23”
30U
23.00”
55.08”
19.13”
6
4
200 lbs.
LPTR-TC
LPTR-NS
37
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
DESKTOP / UNDER-COUNTER
LDTR DESKTOP RACK
Application
The LDTR is a great choice for basic housing of electronics kept near at hand
such as on a desk, in a credenza, or under a counter.
Construction
Made in the U.S.A. with fully welded 16-ga. certified U.S. steel. Load capacity
150 lbs. Beveled front corners. Black wrinkle powder epoxy finish.
What’s Included ?
LDTR-1218
Top . . . . . . . . . . . . . . . . . . Welded steel with knockouts.
Base . . . . . . . . . . . . . . . . . Welded steel with knockouts. Rubber feet (0.5”).
Open Front. . . . . . . . . . . . Beveled corners. Optional door available.
Open Back . . . . . . . . . . . . Open for accessibility; optional access cover available.
Welded Sides . . . . . . . . . Sides have vents at top and bottom.
Fixed Rails. . . . . . . . . . . . Mounting rails (tapped 10-32) in front and back remain in factory-mounted positions. Front rails are recessed 0.83” from frame. Printed RU scale facilitates
gear-mounting.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid, fully-vented, or smoked plexiglass.
(LFD Series).
Rear Access Cover . . . . . Steel panel (LDTR-RAC Series) cannot be used in
conjunction with optional rear rails.
Rear Rails . . . . . . . . . . . . Additional rails mount in the rear (RRTF Series).
Rail Conversion Bracket. . Changes fixed-position rails to adjustable style, allowing them to be placed deeper into the rack (RRTBF).
Protective Runner Kit . . . Set of plastic glides protect cabinet surfaces when
rack is used in a slide-in application (PRK, pg. 72).
Swivel Casters . . . . . . . . Set of four swivel casters increase rack height 2.5” (C2S).
Certification & Compliance
EIA/TIA
Optional rear access cover
LDTR-RAC
Made in
Missouri, USA
COMPLIANT
Technical
FRONT
Fixed position
front mounting
rails
SIDE
REAR
Side vents
at top and
bottom
TOP
Fixed position
rear mounting
rails
Top knockouts
for wires and
cables
Racking
Space
LDTR-1618
BASE
Knockouts in
base for wires
and cables
Rubber
feet.
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height *
Useable
Depth
Overall
Width
Mtg
Rails
LDTR-718
LDTR-1018
Solid
Front Door
Fully-vented
Front Door
Plexiglass
Front Door
Rear Access
Cover
Rear Mtg.
Rails
Protective Rail Conversion Swivel
Runner Kit
Bracket
Casters
18.18”
7U
16.63”
17.20”
23.06”
2 pr
LFD-7
LFD-7FV
LFD-7P
LDTR-RAC7
RRTF-7
PRK
RRTBF
C2S
18.18”
10U
21.88”
17.20”
23.06”
2 pr
LFD-10
LFD-10FV
LFD-10P
LDTR-RAC10
RRTF-10
PRK
RRTBF
C2S
LDTR-1218
18.18”
12U
25.38”
17.20”
23.06”
2 pr
LFD-12
LFD-12FV
LFD-12P
LDTR-RAC12
RRTF-12
PRK
RRTBF
C2S
LDTR-1418
18.18”
14U
28.88”
17.20”
23.06”
2 pr
LFD-14
LFD-14FV
LFD-14P
LDTR-RAC14
RRTF-14
PRK
RRTBF
C2S
LDTR-1618
18.18”
16U
32.38”
17.20”
23.06”
2 pr
LFD-16
LFD-16FV
LFD-16P
LDTR-RAC16
RRTF-16
PRK
RRTBF
C2S
* Add 0.5” for rubber feet.
38
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
LDSR DESKTOP RACK (SLOPED FRONT)
Application
The LDSR is a small desktop rack with a sloped front for easy viewing of equipment from a seated position.
Made in the U.S.A. with fully welded 16-ga. certified U.S. steel. Black wrinkle powder epoxy finish.
What’s Included ?
LDSR-1018
Construction
Top . . . . . . . . . . . . . . . . . . Welded steel top.
Open Base . . . . . . . . . . . . Full opening for cable entry. Rubber feet protect desk
and counter surfaces (adding 0.5” to overall height).
Open Front. . . . . . . . . . . . A 12˚ slope allows equipment to be easily viewed
while seated. This rack does not accept a front door
so protruding knobs or patch panels pose no clearance problems.
Open Back . . . . . . . . . . . . Full opening for cable entry.
Welded Sides . . . . . . . . . Solid steel side panels.
Fixed Rails. . . . . . . . . . . . Front rails (tapped 10-32) remain in their mounted position, recessed 0.562” from frame.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Rear Rails . . . . . . . . . . . . Additional rails mount in the rear (RRTF Series).
Rear Access Cover . . . . . Steel panel (LDTR-RAC Series) cannot be used in
conjunction with optional rear rails.
Protective Runner Kit . . . Set of plastic glides protect cabinet surfaces when metal
rack is used in a slide-in application (PRK, pg. 72).
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
FRONT
SIDE
LDSR-1218
Fixed
position
front rails
Sloped front
allows easy
viewing of
equipment
while
seated
Racking
Space
REAR
TOP
Four
rubber
feet
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this
rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Overall
Depth (at base)
Racking
Space
Overall
Height *
Overall
Width
Mtg
Rails
Rear Access
Cover
Rear Mtg
Rails (pr)
Protective
Runner Kit
LDSR-718
18.00”
7U
14.21”
21.10”
1 pr
LDTR-RAC7
RRTF-7
PRK
LDSR-1018
18.00”
10U
19.35”
21.10”
1 pr
LDTR-RAC10
RRTF-10
PRK
LDSR-1218
18.00”
12U
22.77”
21.10”
1 pr
LDTR-RAC12
RRTF-12
PRK
*Add 0.5” for rubber feet
39
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LRS DESKTOP RACK STAND
Application
The LRS Series two post rack stand provides a simple way to organize small AV
installations where space is limited and a full size rack isn’t needed. It can be set
up as a freestanding unit or bolted to a desktop.
Construction
Made in the U.S.A. with 16-gauge certified U.S. steel side supports and 11-ga.
steel rails positioned on a 10˚ angle. Load capacity 80 lbs. Smooth black powder
epoxy finish. Ships unassembled.
LRS-12
What’s Included ?
Base . . . . . . . . . . . . . . . . . Base consists of steel supports in front and sides.
Post Rails . . . . . . . . . . . . Rails (tapped 10-32) are angled 10˚ when rack is assembled. Printed RU scale facilitates gear-mounting.
Hardware . . . . . . . . . . . . . Includes assembly hardware.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
SIDE
FRONT
Quick set-up
with printed
RU scale
Sloped front
for easy viewing of
equipment from a
seated position
Model Numbers
Accessories begin on pg. 58.
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Overall
Width
Post
Mtg Rails
Load
Capacity
LRS-8
11.50”
8U
15.86”
19.06”
2
80 lbs.
LRS-12
11.50”
12U
22.86”
19.06”
2
80 lbs.
40
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
LPSR ROLLOUT STUDIO RACK
Application
The LPSR is ideal for use as an under desk studio rack. The 15˚ sloped front
allows easy viewing of electronic controls from a seated position at a desk,
while the swivel casters provide convenient rollout access.
Decora® style cutouts (with covers) allow
access to (optional) mounted switches
without opening the rack.
Construction
Made in the U.S.A. with fully welded 18-ga. certified U.S. steel, reinforced at all
load-bearing junctions. Load capacity 250 lbs. Black wrinkle powder epoxy finish.
What’s Included ?
LPSR-1226
Top . . . . . . . . . . . . . . . . . Steel top. Optional laminate top has rounded corners, rubber edge molding and a Graphite Grey
premium finish. Made to slightly overhang steel
top. (23.75” x 20.25” x 1”).
Base . . . . . . . . . . . . . . . . . Solid base with four swivel casters for rollout access.
Front Door . . . . . . . . . . . . Hideaway front door with keyed lock and vents
opens from top and slides into base for storage.
Rear Access Cover . . . . . Removable rear access cover with keyed lock
opens from top. Keyed differently than front door.
Includes two cable entry ports.
Welded Sides . . . . . . . . . Welded sides have top and bottom vents for passive ventilation. Recessed handles.
Fixed Rails. . . . . . . . . . . . Front mounting rails (tapped 10-32) remain in factorymounted position. Printed RU scale facilitates gearmounting. Rack has rear mounting holes punched on
E.I.A. spacing that include 10-32 Tinnerman clips.
Cable Management . . . . . Two cable entry ports in rear door.
Thermal Management. . . Vented sides and front door.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
SIDE
FRONT
Decora®
style cutouts
(with covers)
above door
Laminate top included with
model no. LPSR-1226GT
Sloped front
allows easy
viewing of
equipment
while
seated
Racking
Space
Vents for
passive
ventilation
TOP
REAR
Removable
rear access
cover has two
ports for cable
entry
Model Numbers
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height*
Overall
Width*
Load
Capacity
Laminate
Top*
LPSR-1226
25.52”
12U angled
26.88”
23.00”
250 lbs.
---
LPSR-1226GT
26.52”
12U angled
27.88”
23.75”
250 lbs.
yes
*Rack depth measured at base is 25.52”. Measurements for Model No. LPSR-1226GT include laminate top which overhangs
steel top, slightly increasing overall width and depth. Height shown includes 0.89” for casters. See online spec sheet for more
information.
41
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
HALF RACK
LHFR HALF RACK & ACCESSORIES
Application
10.69”
WIDTH
The LHFR Series half rack measures only 10.69 inches wide making it ideal for
housing half rack systems and non-standard electronics. The welded frame allows
pre-loading of equipment before transporting unit to the installation site. Unique
design permits versatile equipment mounting in front, back, sides, top or bottom.
Construction
Welded, certified U.S. steel construction with 16-ga. steel top and bottom rails
and 11-ga. steel post rails tapped 10-32.
What’s Included ?
Base . . . . . . . . . . . . . . . . . Top/Bottom integral rails (16-ga. steel, 3U space)
Post Rails . . . . . . . . . . . . 11-ga. steel front/rear rails tapped 10-32 on E.I.A
spacing.
Hardware . . . . . . . . . . . . . Grounding studs
LHFR 1214
What’s Optional ?
Half Rack Accessories . . Including half rack shelves, panels and more, see
next page.
Certification & Compliance
Made in
Missouri, USA
Compatible
Technical
FRONT
SIDE
TOP & BASE
Integral top &
base rails
tapped 10-32
LHFR 1214
Racking
Space
Integral
rails
tapped
10-32
Integral
rails
tapped
10-32
Half Rack Model Numbers
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Height
Overall
Width
Load
Capacity
LHFR-814
14.00”
8U
15.00”
10.69”
125 lbs.
LHFR-1214
14.00”
12U
21.94”
10.69”
125 lbs.
Top with 1U blank panels and
FDC4-1HR fan panel.
A versatile design permits equipment
to be mounted in the front, back,
sides, top or bottom of Lowell’s
LHFR Series half racks.
Great for small spaces! Can be mounted under desks and counters or in cabinetry. Shown with
accessories (FDC4-1HR, UVSH-13, UVSH-15 and UVSH-111).
42
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Thermal Management for Half Rack
FDC4-1HR Series . . . . . . 10.40”W half rack fan panel has super quiet fans with
universal (100–240VAC) input voltage, 6-ft. cord and four
plug adaptors for North America, central Europe, the
U.K. and Australia/New Zealand/South Pacific. Optional
thermostat probe activates/deactivates fans, increasing
and decreasing speed as temperature reaches set
points. UL Listed power supply.
Model
No.
Description
FDC4-1HR
1U panel, 4 fans
1.57” / 36cfm / 38dBA
---
FDC4-1HRT
1U panel, 4 fans
1.57” / 36cfm / 38dBA
Yes
Fan Dia. / Total Airflow / Noise Rating
FDC4-1HR
Thermostat
Probe
Accessories for Half Rack
Utility Shelf, Vented . . . . 16-ga. vented steel utility shelf with flanges.
Model No.
Racking Height
Width
Depth
Finish
UVSH-13
UVSH-15
UVSH-111
1U
1U
1U
10.40”
10.40”
10.40”
3.50”
5.50”
11.50”
Black Semi-Gloss
Black Semi-Gloss
Black Semi-Gloss
UVSH-111
Blank Formed Panel . . . 18-ga. steel panel with flange. Black semi-gloss finish.
Model No.
Racking Height
Width
Finish
SEPH-1
1U
10.40”
Black Semi-Gloss
SEPH-2
2U
10.40”
Black Semi-Gloss
SEPH-2
Vent Panel (Slotted) . . . . 18-ga. steel panel with vent slots and flange.
Black semi-gloss finish.
Model No.
Racking Height
Width
Finish
SVSPH-1
1U
10.40”
Black Semi-Gloss
SVSPH-2
2U
10.40”
Black Semi-Gloss
SVSPH-2
43
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
WALL-MOUNT
LWR WALL-MOUNT SWING-OPEN RACK (HEAVY DUTY)
Application
The LWR heavy duty, sectional, swing-open wall-mount rack includes a steel
backbox and cabinet that swings open for convenient access to wires, cables and
equipment connections.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (11-ga. rails).
spring loaded hinge pins, fully gusseted corners and triple formed side-to-bottom,
side-to-top wrap design achieves strength equivalent to 3/16” thick steel. Black
wrinkle powder epoxy finish. Ships in two cartons, allowing backbox to be sent to
the job site while the cabinet is loaded at the shop.
LWR-2428
What’s Included ?
Swings open greater than
90˚ for access.
Backbox . . . . . . . . . . . . . Backbox (5.80”D) features a large center cutout to
provide clearance for wall mounted junction boxes
and other wall protrusions. Embossed dimples and
lacing points on the back allow flush installation of
board-mounted accessories. Removable knockout
panels on top and bottom. One project panel on bottom. Two keyed side locks.
Cabinet . . . . . . . . . . . . . . Mounts to backbox from the inside with self-seating,
positive locking L-pins that can be repositioned to
change swing orientation. Roller closure seats cabinet securely in closed position without mandatory
locking. Swings open greater than 90˚ for access. See
online spec sheets for clearance tolerances.
Open Front. . . . . . . . . . . . Vents at top and bottom of cabinet’s front. Ships ready
to mount optional front door (left or right).
Welded Sides . . . . . . . . . Welded side panels have top and bottom vents for
passive ventilation.
Adjustable Rails . . . . . . . One-pair front mounting rails (tapped 10-32) are set
back 0.625” to accommodate equipment knobs but
can be repositioned anywhere along side rail supports. Printed rack unit scale facilitates gear-mounting. Integral top and bottom rails on E.I.A. spacing for
mounting or lacing.
Cable Management . . . . . Backbox has 0.50” knockouts for wireless antennas,
knockout panels with combination knockouts, and a
project panel.
Thermal Management. . . Side vents accept optional single fan kit (pg. 64).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount solid, fully-vented or smoked plexiglass door mounts left or right (LFD Series).
Additional Rails. . . . . . . . Rails mount in the rear or anywhere along side rail
supports (RRD Series in chart at right).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Certification & Compliance
EIA/TIA
COMPLIANT
44
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
FRONT
Ships ready
to mount
optional front
door
SIDE
BACKBOX
TOP
Removable
knockout
panels
Side panel
vents
BASE
Racking
Space
Center
cutout
LWR-3523
Removable
knockout
panel and
project panel
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Adjustable
Rails
Usable*
Depth
Overall
Height
Overall
Width
Maximum
Load
LWR-719
LWR-1019
Solid
Front Door
Fully-vented
Front Door
Plexiglass
Front Door
Add’l
Rails (pr)
19.00”
7U
1 pr
16.00”
18.38”
23.06”
125 lbs.
LFD-7
LFD-7FV
LFD-7P
RRD-7
19.00”
10U
1 pr
16.00”
23.63”
23.06”
150 lbs.
LFD-10
LFD-10FV
LFD-10P
RRD-10
LWR-1219
19.00”
12U
1 pr
16.00”
27.13”
23.06”
150 lbs.
LFD-12
LFD-12FV
LFD-12P
RRD-12
LWR-1619
19.00”
16U
1 pr
16.00”
34.13”
23.06”
200 lbs.
LFD-16
LFD-16FV
LFD-16P
RRD-16
LWR-2119
19.00”
21U
1 pr
16.00”
42.88”
23.06”
250 lbs.
LFD-21
LFD-21FV
LFD-21P
RRD-21
LWR-2419
19.00”
24U
1 pr
16.00”
48.13”
23.06”
300 lbs.
LFD-24
LFD-24FV
LFD-24P
RRD-24
LWR-3519
19.00”
35U
1 pr
16.00”
67.38”
23.06”
300 lbs.
LFD-35
LFD-35FV
LFD-35P
RRD-35
LWR-723
23.00”
7U
1 pr
20.00”
18.38”
23.06”
125 lbs.
LFD-7
LFD-7FV
LFD-7P
RRD-7
LWR-1023
23.00”
10U
1 pr
20.00”
23.63”
23.06”
150 lbs.
LFD-10
LFD-10FV
LFD-10P
RRD-10
LWR-1223
23.00”
12U
1 pr
20.00”
27.13”
23.06”
150 lbs.
LFD-12
LFD-12FV
LFD-12P
RRD-12
LWR-1623
23.00”
16U
1 pr
20.00”
34.13”
23.06”
200 lbs.
LFD-16
LFD-16FV
LFD-16P
RRD-16
LWR-2123
23.00”
21U
1 pr
20.00”
42.88”
23.06”
250 lbs.
LFD-21
LFD-21FV
LFD-21P
RRD-21
LWR-2423
23.00”
24U
1 pr
20.00”
48.13”
23.06”
300 lbs.
LFD-24
LFD-24FV
LFD-24P
RRD-24
LWR-3523
23.00”
35U
1 pr
20.00”
67.38”
23.06”
300 lbs.
LFD-35
LFD-35FV
LFD-35P
RRD-35
LWR-1228
28.00”
12U
1 pr
25.00”
27.13”
23.06”
300 lbs.
LFD-12
LFD-12FV
LFD-12P
RRD-12
LWR-1628
28.00”
16U
1 pr
25.00”
34.13”
23.06”
300 lbs.
LFD-16
LFD-16FV
LFD-16P
RRD-16
LWR-2428
28.00”
24U
1 pr
25.00”
48.13”
23.06”
300 lbs.
LFD-24
LFD-24FV
LFD-24P
RRD-24
LWR-1232
32.00”
12U
1 pr
29.00”
27.13”
23.06”
300 lbs.
LFD-12
LFD-12FV
LFD-12P
RRD-12
LWR-1632
32.00”
16U
1 pr
29.00”
34.13”
23.06”
300 lbs.
LFD-16
LFD-16FV
LFD-16P
RRD-16
LWR-2432
32.00”
24U
1 pr
29.00”
48.13”
23.06”
300 lbs.
LFD-24
LFD-24FV
LFD-24P
RRD-24
*Usable depth allows partial extension of equipment into backbox.
Lowell’s unique vent pattern in rear doors and select side panels, such as those found on the LWR series, allows single fan kits (such as FW1-KIT) to be
mounted anywhere along the pattern inside the cabinet. Great for spot cooling!
45
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LWBR WALL-MOUNT SWING-OPEN RACK WITH SUPPORT BASE
Application
The LWBR wall-mount rack includes a backbox with a swing-out cabinet and support base. The cabinet opens using a single-release loop and has a secure slamlatch closure. The base provides an additional 4U rack space for electronics,
accessories or storage.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel. Load capacity
500 lbs. Beveled corners. Black wrinkle powder epoxy finish.
LWBR-4028
What’s Included ?
Cabinet
swings
open 90˚
for access
Remove panel in support
base for an additional 4U
rack space
Backbox . . . . . . . . . . . . . 4.69”D backbox mounts on 16” centers and
features a large central cutout area to allow for wall
protrusions and wiring.
Cabinet Front. . . . . . . . . . Pull loop to swing cabinet open 90˚ and access rear
connections. Right-hinged swing can be changed to
left using internal spring-loaded hinges. Slam latch
closure. Front keyed lock secures cabinet to backbox
while allowing side-by-side rack arrangements. Cabinet’s open front ships ready to accept an optional
door (left or right mount).
Cabinet Sides . . . . . . . . . Welded sides have vents that can mount optional single fan kit (FW1-KIT, pg. 64).
Cabinet Top . . . . . . . . . . . Integral top rails mount steel closure panels (included
as shipping stiffeners) or optional 19”W accessories.
Adjustable Rails . . . . . . . One-pair front mounting rails (tapped 10-32) can be
repositioned anywhere along side rail supports.
Printed rack unit scale facilitates gear-mounting.
Support Base . . . . . . . . . Stainless steel ball transfers allow cabinet to pivot open
smoothly. Base has two removable access panels—
one in top and one in front. Remove front panel to use
additional four rack units for equipment or accessories.
Cable Management . . . . Removable panel in top of rack features knockouts for
wireless antennas (0.50”) and combination knockouts
for conduit.
Thermal Management. . . Front and side vents. Top accepts optional 19”W fan
panels.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount front door with keyed lock mounts left
or right. Solid, fully-vented, or smoked plexiglass.
(LFD Series).
Support Base Door. . . . . 4U door protects electronics mounted in base
(LWBR-BD4).
Additional Rails. . . . . . . . Rails mount in the rear or anywhere along side rail
supports (RRD Series).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
®
Rackware Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Pull loop to swing
cabinet open
Certification & Compliance
EIA/TIA
COMPLIANT
Stainless steel ball
transfers, in base,
allow cabinet to pivot
smoothly, even under
heavy loads
46
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Made in
Missouri, USA
Technical
BACKBOX
FRONT
SIDE
TOP VIEW
(closed)
Removable
knockout panels
Ships
ready to
mount
optional
front door
(left or
right)
Multiple BNC
knockout points
for UHF/VHF
wireless antennas
TOP VIEW
(open)
Racking
Space
Center
cutout
Bottom
access
panel
Side vents
for passive
ventilation
LWBR-4028
Six stainless steel
weight transfers
Additional 4U
rack space
in base
Front
access
panel
Bottom
access
panel
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Overall
Width
Overall
Height
Usable
Depth*
Mounting
Rails
Solid
Front Door
Fully-vented
Front Door
Plexiglass
Front Door
Support
Base Door
Utility
Drawer
Add’l
Rails (pr)
LWBR-4022
22.40”
40U
23.06”
85.78”
20.00”
1 pr
LFD-40
LFD-40FV
LFD-40P
LWBR-BD4
UDP-414
RRD-40
LWBR-2428
28.40”
24U
23.06”
57.77”
26.00”
1 pr
LFD-24
LFD-24FV
LFD-24P
LWBR-BD4
UDP-414
RRD-24
LWBR-3528
28.40”
35U
23.06”
77.03”
26.00”
1 pr
LFD-35
LFD-35FV
LFD-35P
LWBR-BD4
UDP-414
RRD-35
LWBR-4028
28.40”
40U
23.06”
85.78”
26.00”
1 pr
LFD-40
LFD-40FV
LFD-40P
LWBR-BD4
UDP-414
RRD-40
LWBR-4428
28.40”
44U
23.06”
92.78”
26.00”
1 pr
LFD-44
LFD-44FV
LFD-44P
LWBR-BD4
UDP-414
RRD-44
LWBR-2432
32.40”
24U
23.06”
57.77”
30.00”
1 pr
LFD-24
LFD-24FV
LFD-24P
LWBR-BD4
UDP-414
RRD-24
LWBR-3532
32.40”
35U
23.06”
77.03”
30.00”
1 pr
LFD-35
LFD-35FV
LFD-35P
LWBR-BD4
UDP-414
RRD-35
LWBR-4032
32.40”
40U
23.06”
85.78”
30.00”
1 pr
LFD-40
LFD-40FV
LFD-40P
LWBR-BD4
UDP-414
RRD-40
*Usable depth allows partial extension of equipment into backbox.
Lowell’s unique vent pattern in rear doors and select side panels, such as those found on the LWBR series, allows single fan kits (such as FW1-KIT) to be
mounted anywhere along the pattern inside the cabinet. Great for spot cooling!
47
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LWSR WALL-MOUNT SWING-OPEN RACK
Application
The LWSR wall-mount rack includes a backbox and cabinet that swings open 90˚
to access equipment and cabling.
Construction
LWSR-1022
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (11-ga. rails). Load
capacity 150 lbs. Cabinet attaches to backbox with two heavy-duty bolts through
steel fasteners secured with nuts. Beveled front corners. Black wrinkle powder
epoxy finish. Backbox and cabinet are boxed together.
What’s Included ?
Backbox. . . . . . . . . . . . . . The 3.65”D backbox features 16” mounting centers, 10”
wiring pathway down center, removable knockout panels on top and bottom (with combination knockouts)
and two keyed locks.
Cabinet . . . . . . . . . . . . . . Open front cabinet will accept optional door (mounts left
or right). Sides have vents at top and bottom.
Fixed Rails. . . . . . . . . . . . Front rails (tapped 10-32) remain as mounted, slightly
recessed to allow room for controls. Printed rack unit
scale facilitates gear-mounting.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws, captive washers, Allen
wrench.
Swings open 90˚ for access.
What’s Optional ?
Front Door . . . . . . . . . . . . Surface-mount front door with keyed lock mounts left or
right. Solid, fully-vented, or smoked plexiglass.
(LFD Series).
Rear Rails . . . . . . . . . . . . Additional rails mount in the rear (RRTF).
Rail Conversion Bracket. . Changes fixed-position rails to adjustable style, allowing
them to be placed deeper into the rack (RRTBF).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc.
can be found online at lowellmfg.com with our full line
of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories
section (pg. 58).
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
FRONT
SIDE
REAR
LWSR-1622
TOP
Center
opening provides wiring
pathway
and clearance for wall
mounted
junction
boxes
Side vents
for passive
ventilation
Racking
Space
Removable
knockout panel
BOTTOM
Removable
knockout panel
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Overall
Depth
Racking
Space
Fixed Mtg
Rails
Overall
Width
Overall Height
w/backbox
Rack
Height
Solid
Front Door
Fully-vented
Front Door
Plexiglass
Front Door
Add’l
Rails (pr)
Rail Conversion
Bracket
LWSR-722
22.00”
7U
1 pr
23.06”
20.08”
16.63”
LFD-7
LFD-7FV
LFD-7P
RRTF-7
RRTBF
LWSR-1022
22.00”
10U
1 pr
23.06”
25.33”
21.88”
LFD-10
LFD-10FV
LFD-10P
RRTF-10
RRTBF
LWSR-1222
22.00”
12U
1 pr
23.06”
28.83”
25.38”
LFD-12
LFD-12FV
LFD-12P
RRTF-12
RRTBF
LWSR-1622
22.00”
16U
1 pr
23.06”
35.83”
32.38”
LFD-16
LFD-16FV
LFD-16P
RRTF-16
RRTBF
48
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
LWER WALL-MOUNT ECONOMICAL RACK (STATIONARY)
Application
The LWER stationary wall-mount rack is for light-to-medium loads where quick access
to rear cables is not a priority and where front rails will remain as mounted. This is an
economical choice for wall-mounted electronics. Includes solid front door with keyed lock.
Construction
Made in the U.S.A. with fully welded 16-gauge certified U.S. steel (11-ga. rails). Load capacity 150 lbs. Beveled front corners. Black wrinkle powder epoxy finish.
Solid Top . . . . . . . . . . . . . Solid top with a removable project panel.
Solid Base . . . . . . . . . . . . Solid base with removable knockout panel featuring combination knockouts.
Front Door . . . . . . . . . . . . Solid steel, surface-mount door with integral handle and
keyed lock mounts left or right.
Wall Bracket . . . . . . . . . . Separate wall bracket has mounting slots, grounding stud,
knockouts and center opening to accommodate cables and
wall protrusions.
Sides . . . . . . . . . . . . . . . . Top and bottom vents allow passive ventilation.
Fixed Rails. . . . . . . . . . . . Front rails (tapped 10-32) remain as mounted, slightly recessed to allow room for control knobs. Printed rack unit
scale facilitates gear-mounting.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
LWER-1018
What’s Included ?
What’s Optional ?
Rear Rails . . . . . . . . . . . . Additional rails mount in rear (RRTF Series).
Rail Conversion Bracket . Changes fixed-position rails to adjustable style, allowing
them to be placed deeper into the rack (RRTBF).
Power . . . . . . . . . . . . . . . . Power strips, remote power controls, sequencers, etc. can
be found online at lowellmfg.com with our full line of products.
Rackware® Accessories . Cable managers, etc. can be found in the accessories section (pg. 58).
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
LWER-1018
FRONT
Racking
Space
SIDE
Side vents
for passive
ventilation
Includes
solid front
door.
TOP
WALL BRACKET
Blank project
panel on top
BOTTOM
Knockout
panel with
combination
knockouts on
bottom
Model Numbers
Model numbers listed within dotted lines represent some of the more commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Overall
Depth*
Racking
Space
Usable
Depth
Overall
Height
Overall
Width
LWER-718
LWER-1018
Fixed Mtg
Rails
Front
Door
Rear
Rails (pr)
Rail Conversion
Bracket
18.18”
7U
17.20”
16.63”
23.06”
1 pr
Solid
RRTF-7
RRTBF
18.18”
10U
17.20”
21.88”
23.06”
1 pr
Solid
RRTF-10
RRTBF
* Add 1” for surface-mount front door.
49
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LWTR WALL-MOUNT TILT OPEN RACK
Application
The LWTR wall-mount rack has 3U racking space to store equipment vertically.
The main compartment tilts out 15˚ for equipment operation and 90˚ for servicing.
NOTE: Some electronics may need to be horizontal to operate correctly, requiring
rack to be in open position.
Construction
Made in the U.S.A. with 100% certified U.S. steel. Beveled corners. Neutral “Network Grey” wrinkle powder epoxy finish. Load capacity 50 lbs. Installs in brick,
concrete block and stud wall construction. Ships in two cartons.
LWTR-3R
What’s Included ?
Cabinet . . . . . . . . . . . . . . Surface-mount or recessed (4”D) backbox features
knockouts and Decora® style cutouts with cover
plates for convenient access to low voltage devices
(optional).
Main Compartment . . . . . Integral handle lowers main compartment, which features two clamping brackets to help secure non-rackmount consumer gear. Two internal Decora ® style
cutouts with cover plates for optional low voltage devices. Includes factory-mounted E.O. box in bottom
and keyed center lock.
Adjustable Rails . . . . . . . One-pair adjustable seven-position rails (tapped 10-32).
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
Multiple Decora® style
cutouts for optional
low-voltage devices
(devices not included).
What’s Optional ?
Latch . . . . . . . . . . . . . . . . Thumb latch replaces keyed lock allowing keyless
entry (TLK, pg. 72).
Factory–mounted
E.O. box in base.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
CLOSED
OPERATIONAL POSITION
SERVICE POSITION
Decora-style
cutouts mount
optional low-voltage
devices for interior
or exterior access
Keyed lock
for security
LWTR-3S
Integral
handle
Tilt open 15˚
to operational
position
Factory-mounted
E.O. box in base
Vents
90˚ service position
Model Numbers
Model number listed within dotted lines represents commonly used option for this rack series; order separately. Additional accessories begin on pg. 58.
Optional
Rack
Model No.
Installation
Type
Overall
Depth
Racking
Space
Overall
Width
Overall
Height
Load
Capacity
Wall
Projection
LWTR-3R
Recessed
5.81”
3U (vertical)
29.06”
29.06”
50 lbs.
1.81”
TLK
LWTR-3S
Surface-Mount
5.81”
3U (vertical)
29.13”
29.13”
50 lbs.
5.81”
TLK
50
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Thumb
Latch
LWTCR WALL-MOUNT TILT OPEN RACK (CONTROLLED RELEASE)
Application
The LWTCR wall-mount rack has 3U racking space to store equipment vertically,
plus 3U space in separate top compartment. Oil-filled dampers control the rate of
descent when opening the main compartment to the 90˚ operational position. This
rack is ideal for amplifiers, small mixers, PA systems and consumer electronics.
Construction
Made in the U.S.A. with 100% certified U.S. steel. Beveled corners. Neutral “Network
Grey” wrinkle powder epoxy finish. Load capacity 50 lbs.
What’s Included ?
LWTCR-3S
Cabinet . . . . . . . . . . . . . . Surface-mount or recessed backbox with knockouts
has oil-filled dampers to control rate of descent when
opening. Backbox has keyholes on 16” centers and
knockouts on 12” centers. Cable raceways on each side.
Recessed model includes trim plate. Main and top compartments secure with single keyed lock.
Main Compartment . . . . . 3U E.I.A. fixed-position rails mount equipment up to
5.25”H x 15.3”D x 19”W, stored in a vertical position.
Removable shelf can hold a laptop computer. Factorymounted E.O. box in bottom.
Top Compartment . . . . . . Additional 3U mounting space hidden behind pocket
door is ideal for optional 19”W control panel. Hinge on
door allows easy servicing.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
What’s Optional ?
Latch . . . . . . . . . . . . . . . . Thumb latch replaces keyed lock allowing keyless entry
(TLK, pg.72).
Punched Panels . . . . . . . Punched panels can be used in the separate top compartment (D8P-ID-3 and D9P-ID-3, pg. 70).
Factory–mounted
E.O. box in base.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
CLOSED
OPERATIONAL POSITION
REAR
Separate top
compartment
Keyed lock
LWTCR-3R
SIDE
Dampers
for controlled
release to
operational
position
Removable
shelf
Vents
Model Numbers
Model number listed within dotted lines represents commonly used options for this rack series; order separately. Additional accessories begin on pg. 58.
OPTIONAL
Rack
Model No.
Installation
Type
Overall
Depth
Racking
Space
Overall
Width
Overall
Height
Load
Capacity
Wall
Projection
Thumb
Latch
Punched
Panels
LWTCR-3R
Recessed
6.06”
3U bottom (vertical) + 3U top
27.38”
35.06”
50 lbs.
1.81”
TLK
D8P-ID-3 or D9P-ID-3
LWTCR-3S
Surface-Mount
6.06”
3U bottom (vertical) + 3U top
24.38”
32.06”
50 lbs.
6.06”
TLK
D8P-ID-3 or D9P-ID-3
51
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
VR WALL RACK
Application
The VR Series wall-mount rack is the quintessential space saver. It mounts standard 19” E.I.A equipment vertically or horizontally - on a wall or under a desk whichever way works best for the project at hand.
VR-3
Construction
Made in the U.S.A. with 16-gauge, 100% certified U.S. steel. This efficient design
is made to handle loads up to 200 lbs.
What’s Included ?
Base . . . . . . . . . . . . . . . . . 16-ga. steel rack mounts to wall or desk, vertically or
horizontally.
Side Rails . . . . . . . . . . . . 11-ga. steel mounting rails tapped 10-32 and printed with
RU scale to facilitate installation. 2U, 3U or 4U models.
Cable Management . . . . . . Two rear obrounds for cable management.
Hardware . . . . . . . . . . . . . Premium PilotPoint™ screws with captive washers.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
Top
VR--3
Base
Side
Model Numbers
Rack
Model No.
Description
VR-2
Wall-mount rack
Racking
Space
Overall
Depth
Overall
Height
Overall
Width
Load
Capacity
2U
3.94”
6.00”
19.17”
200 lbs.
VR-3
Wall-mount rack
3U
5.69”
6.00”
19.17”
200 lbs.
VR-4
Wall-mount rack
4U
7.44”
6.00”
19.17”
200 lbs.
One rack unit (RU or U) = 1.75 inches or 44.45 mm.
52
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Lowell manufactures power products, audio products and rack enclosures
for the professional A/V industry. Visit lowellmfg.com for a full product listing.
Application
The WS heavy duty, wall-mount shelf provides solid support for electronic equipment where a full size rack may not be practical.
Construction
WS21-17
WALL-MOUNT SHELVES
WS HEAVY DUTY WALL SHELF
Made in the U.S.A. with 16-gauge certified U.S. steel. One piece construction
supports a load capacity of 200 lbs. when properly mounted. Smooth black powder epoxy finish.
What’s Included ?
Top, Base . . . . . . . . . . . . . Top and base have combination knockouts. Front return
helps retain equipment.
Rear . . . . . . . . . . . . . . . . . Keyhole slots mount on 8” and 16” centers
Sides . . . . . . . . . . . . . . . . Angled sides with small knockout.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
REAR
SIDE
Model Number
Model No.
Overall Depth
Overall Height
Overall Width
Load Capacity
WS21-17
17.00”
15.00”
21.00”
200 lbs.
WSL LIGHT DUTY WALL SHELF
Application
WSL-1814
The WSL light duty wall-mount shelf provides basic support for electronic equipment. It’s very well suited for in-closet wiring applications.
Construction
Made in the U.S.A. Single piece 16-gauge certified U.S. steel construction—
formed and bolted. Load capacity 40 lbs. when properly mounted. Smooth black
powder epoxy finish.
What’s Included ?
Top . . . . . . . . . . . . . . . . . . Center vents. Oblong holes for cable drop.
Rear . . . . . . . . . . . . . . . . . Mounting holes on 16” stud centers.
Sides . . . . . . . . . . . . . . . . Angled sides.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
TOP
REAR
SIDE
Model Number
Model No.
Overall Depth
Overall Height
Overall Width
Load Capacity
WSL-1814
14.00”
3.47”
18.00”
40 lbs.
54
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
FS FLAT-SHIP, HINGED WALL SHELF
Application
FS18-16
The FS wall-mount shelf’s space saving design is hinged to fold flat for convenient
shipping and storage. To mount, rotate the rear panel 90˚ until flanges insert into
rear slots. Provides secure support for up to 100 lbs.
Construction
Made in the U.S.A. with 16-gauge certified U.S. steel. Supports a load capacity of
100 lbs. when properly mounted. Black powder epoxy finish.
What’s Included ?
Base . . . . . . . . . . . . . . . . . Two oblong cutouts allow cables or wires to drop down
through shelf.
Front. . . . . . . . . . . . . . . . . Front retaining lip is flanged for strength.
Rear . . . . . . . . . . . . . . . . . Rear is punched for mounting accessories and cable
lacing. Openings accommodate single gang, studmounted conduit boxes and existing fixtures. Keyhole
slots on 16” centers.
Cable Management . . . . . Oblong cutouts in base, openings in rear and sides. Prepunched cable lacing and accessory mounting holes
for versatility.
Unique design allows shelf to
be installed in either direction.
Certification & Compliance
EIA/TIA
Made in
Missouri, USA
COMPLIANT
Technical
BASE
Obround holes for
cable drop
REAR
Keyhole
slots
SIDE
Model Numbers
Model No.
Overall
Depth
Overall
Height
Overall
Width
Load
Capacity
FS18-14
14.00”
8.19”
18.22”
100 lbs.
FS18-16
16.00”
8.19”
18.22”
100 lbs.
FS18-20
20.00”
8.19”
18.22”
100 lbs.
55
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
LER---IAV RACK WITH PRE-INSTALLED ACCESSORIES
Description
The LER---IAV is an E.I.A. compliant welded rack that includes a number of preinstalled accessories that are commonly used in AV applications. The entire unit
is shipped in a ready-to-use format, saving assembly time at the shop.
Installed Accessories
Adjustable Rails . . . . . . . Extra pair of adjustable rails. Height varies with rack
height. (RRD).
Utility Shelf . . . . . . . . . . . 16-ga. steel shelf with bottom vent and flanges. Load
capacity 50 lbs.
Vari-Depth Shelf . . . . . . . Variable-depth shelf supports 250 lbs. (VDS-2-2032).
Horizontal Cable Managers. 4” offset slotted steel bar (CMBS-4).
Vertical Cable Managers 16-ga. steel bar with velcro post tie, round/square
punches. 3.25”W. (CMV3).
15A Power Strip. . . . . . . . Depending on rack height
- 18U rack includes power strip with 6 single outlets,
6-ft fixed cord, transient voltage surge suppression,
circuit breakers. UL Listed. Imported.
- 21U, 35U racks include power strip with 12 single
outlets, 12-ft fixed cord, transient voltage surge suppression, circuit breakers. UL Listed. Imported.
Vent Panels . . . . . . . . . . . 2U steel panels (SVP-2).
Mobile Base. . . . . . . . . . . Mobile base with fine-floor casters (LMB-27F).
Model Numbers
LER-3527
Installed Accessories
Model No.
Rack
Description
Total Utility Vari-Depth Cable Vent
Rails Shelves Shelf
Mgrs Panels
LER-1827-IAV
(18U x 27”D x 23”W) enclosed rack
2 pr
3
1
4
LER-2127-IAV
(21U x 27”D x 23”W) enclosed rack
2 pr
3
1
4
LER-3527-IAV
(35U x 27”D x 23”W) enclosed rack
2 pr
5
1
7
BAV Bundles
See racks with un-installed accessory bundles
online at lowellmfg.com
56
Lowell Racks & Accessories Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Power
Strip
Mobile
Base
3
6 outlets
1
3
12 outlets
1
5
12 outlets
1
LXR---IAV RACK WITH PRE-INSTALLED ACCESSORIES
Description
The LXR---IAV is a pre-assembled E.I.A. compliant rack that includes a number
of pre-installed accessories that are commonly used in AV applications. The entire
unit is shipped in a ready-to-use format, saving assembly time at the shop.
Utility Shelf . . . . . . . . . . . 16-ga. vented steel shelf with flanges. Load capacity
50 lbs.
Vari-Depth Shelf . . . . . . . Variable-depth shelf supports 250 lbs. (VDS-2-2032).
Cable Management Bar . 16-ga. vertical-mount slotted steel panel.
- 14U rack includes 12U panel (CMV3-12)
- 30U rack includes 24U panel (CMV3-24)
- 38U rack includes 35U panel (CMV3-35)
AC Power Strip . . . . . . . . 15A power strip with cord and NEMA 5-15P plug includes common mode transient voltage surge suppression (UL1449-3 Listed) with LED indicator and
15A circuit breakers.
- 14U rack includes power strip with 6 single outlets,
6-ft fixed cord. Imported.
- 30U and 38U racks include power strip with 12 single outlets, 12-ft fixed cord. Imported.
Vent Panels . . . . . . . . . . . 2U vent panel. Smooth semi-gloss black powder
epoxy finish. (SVP-2)
Casters. . . . . . . . . . . . . . . Swivel casters for fine floors (2 locking).
LXR-3021-IAV
Installed Accessories
Note: to avoid tip-over, use caution when loading or moving a rack mounted on
casters.
Model Numbers
Installed Accessories
Model No.
Rack
Description
Utility
Shelves
Vent
Panels
Power
Strip
Cable
Mgmt Bar
LXR-1421-IAV
(14U x 21”D x 19.21”W) slim rack
3
2
1
1
Casters
1 set
LXR-3021-IAV
(30U x 21”D x 19.21”W) slim rack
5
5
1
1
1 set
LXR-3821-IAV
(38U x 21”D x 19.21”W) slim rack
6
6
1
1
1 set
57
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Racks & Accessories Catalog
RACKWARE® ACCESSORIES
RACKMOUNT SHELVES
Shelves
LXR-NS26
Zero-Space Shelf . . . . . . For wide equipment that won’t fit standard rack spacing. Mounts on side rails at four points. 16-ga. steel with
bottom vents and side obrounds. Black semi-gloss.
Shelves mount on side rails,
not front rails, allowing more
space for wider equipment.
Model No.
Fits
Depth
Load Capacity
LXR-NS21
LXR-NS26
LPTR-NS
LXR Rack 21”D
LXR Rack 26”D
LPTR and LPOR Rack
20.45”
25.69”
16.38”
250 lbs.
250 lbs.
250 lbs.
Utility Shelf . . . . . . . . . . . 16-ga. steel utility shelf with flanges. Black
MULTI-PAK
US-210
Model No.
Height
Depth
Width
US-110
US-114
US-210
US-214
US-310
US-314
US-414
US-110MC
US-114MC
US-214MC
US-314MC
US-110CC
US-114CC
US-210CC
US-214CC
1U
1U
2U
2U
3U
3U
4U
1U
1U
2U
3U
1U
1U
2U
2U
10.00”
14.00”
10.00”
14.00”
10.00”
14.00”
14.00”
10.00”
14.00”
14.00”
14.00”
10.00”
14.00”
10.00”
14.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
Load Capacity Carton Pack
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
1
1
1
1
1
1
1
50
50
50
36
12
10
6
6
Utility Shelf for Electronics . 16-ga. steel shelf with punched base for screw-mount
installation of chassis style accessories. Front security panel. Rear flange and cable lacing points. Black.
USE-210
Model No.
Height
Depth
Width
USE-210
USE-310
2U
3U
10.00”
10.00”
19.00”
19.00”
Load Capacity Carton Pack
50 lbs.
50 lbs.
1
1
USV-214
Utility Shelf, Vented . . . . 16-ga. steel utility shelf with vents and flanges. Black.
Model No.
Height
Depth
Width
USV-110
USV-214
USV-314
USV-414
1U
2U
3U
4U
10.00”
14.00”
14.00”
14.00”
19.00”
19.00”
19.00”
19.00”
Load Capacity Carton Pack
50 lbs.
50 lbs.
50 lbs.
50 lbs.
4
2
1
1
Utility Shelf, Clamping . . 16-ga. steel with vents, clamping brackets to secure
equipment, rear stops, and flanges. Side slots allow
height adjustment of brackets. Black semi-gloss.
USVC-215
20”-3
VDS-2-2032
with cable drops
2”
Model No.
Height
Depth
Width
USVC-215
USVC-315
USVC-415
2U
3U
4U
15.00”
15.00”
15.00”
19.00”
19.00”
19.00”
Load Capacity Carton Pack
50 lbs.
50 lbs.
50 lbs.
1
1
1
Variable Depth Shelves . 16-ga. steel shelves with vents, adjustable depth and
brackets. Smooth black. Two styles.
VDS-1-1525
Height
Useable Depth
Width
Load Capacity
VDS-2-2032
VDS-1-1525
2U
1.50”
20.00” - 32.00”
15.25” - 25.00”
19.00”
19.00”
250 lbs.
400 lbs.
-25
5”
.2
15
Model No.
”
3U
2U
VWS-214
Variable Width Shelf . . . 16-ga. steel, 3-piece shelf with side supports expands
from 17.5”-22”W behind front rack rails. Side supports
can be installed with long or short side up to emulate
2U or 3U panel space. Smooth black.
Shelves mount on side rails,
not front rails, allowing more
space for wider equipment.
Model No.
Height
VWS-214
2U or 3U
14.00” 17.50” - 22.00”
50 lbs.
VWS-218
2U or 3U
18.00” 17.50” - 22.00”
50 lbs.
2”
”-2
17.5
58
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Depth
Useable Width
Load Capacity
Keyboard/Monitor Shelf . . Reinforced shelf for a monitor and extended keyboard
with slide-out, rotating tray. Extension tray for mouse for
right- or left-hand use. Hinged front panel. Mounts on
front and rear rack rails. Rear rail extension 6”. Black.
Includes wrist pad.
Model No.
KDMS
Height
Depth
Width
Load Capacity
4.34” / 2+U
20.00”
19.00”
70 lbs.
Equipment not
included
KDMS
Knockdown Shelf . . . . . . . Base and sides sold separately for mix-and-match versatility. 16-ga. steel base with vents ships with hardware.
Black.
Model No.
Description
Depth
KSE2
KSE3
KSE4
KSE2X
KSE3X
KSE4X
KSB14
KSB18
KSB21
KSTB
2U sides
14.00”
3U sides
14.00”
4U sides
14.00”
2U sides
18.00”
3U sides
18.00”
4U sides
18.00”
Vented base
14.00”
18.00”
Vented base
Vented base
21.00”
Optional clamping bracket
Quantity
Load Capacity
1pr
1pr
1pr
1pr
1pr
1pr
1 ea.
1 ea.
1 ea.
50 lbs.
70 lbs.
70 lbs.
50 lbs.
70 lbs.
70 lbs.
-------
Sl
ide
-o
ut
sh
elf
KSB18
KSE2X
FWS-215
Fixed Writing Surface . . . 16-ga. steel frame with northern oak wood laminate finish. Mounts facing out from rack.
Model No.
Height
Surface Depth
Width
Load Capacity
FWS-215
2U
15.00”
19.00”
30 lbs.
Sli
de
Model No.
SLS
Height
Depth
Width
Load Capacity
2.50” / 1+U
14.63”
19.00”
50 lbs.
Reversible Shelf/Drawer . 16-ga. steel slide-out shelf, or shallow drawer depending upon orientation, with rear supports. Smooth black.
Model No.
Height
Drawer Depth
Width
Load Capacity
RSD-116
1U
18.00” - 33.00”
19.00”
80 lbs.
Description
Height
Depth
Width
Load Capacity
RMK214-LFP
RMK314-LFP
RMK414-LFP
RMK514-LFP
RMK218-LFP
RMK318-LFP
RMK418-LFP
RMK518-LFP
RMK-TCMP
Shelf only
Shelf only
Shelf only
Shelf only
Shelf only
Shelf only
Shelf only
Shelf only
Top clamp
2U
3U
4U
5U
2U
3U
4U
5U
14.00”
14.00”
14.00”
14.00”
18.00”
18.00”
18.00”
18.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
he
lf
SLS
-out
Slide
shelf
RSD-116
shelf orientation
RMK Shelf . . . . . . . . . . . . 14-ga. steel shelf for custom face plate used with nonrackmount equipment up to 17.38”W. Optional top
clamp. NOTE: Custom model numbers are needed for
kit (shelf with face plate) or individual face plate (added
at a later date). See p.60 for information. Models for
shelf without face plate are listed below.
Model No.
-ou
ts
Sliding Latching Shelf . . 16-ga. steel slide-out shelf extends 14.63” and can latch
in closed or open position. Measures slightly more than
1U. Black semi-gloss.
RSD-116 shallow
drawer orientation
RMK414
RMK shelves fold on hinges
(no assembly required)
59
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
RMK CUSTOM FIT
Custom Face Plate
The RMK Series custom face plate is made to your specifications and secures on
standard E.I.A. spacing (after the RMK shelf, p. 59, is mounted to your rack) to
achieve a finished appearance for non-rackmount equipment. If equipment changes
in the future, only a new face plate is required.
RMKFP-___ is custom made to fit around your nonrackmount equipment for a finished appearance.
Model No.
Description
RMKFP-___(partial no.)*
Face plate only
*Visit lowellmfg.com for more information.
RMK Series Kit (Shelf + Face Plate)
The 14-gauge steel shelf with custom face plate is available in several formats. The
complete kit includes a shelf, custom face plate, L-brackets, and mounting hardware
to provide professional installation of non-rackmount equipment up to 17.375”W. The
open shelf and custom face plate can also be purchased separately.
Model No.
Description
Racking Height
Depth
Width
Load Capacity
RMK2-14-__(partial no.)*
Shelf with custom face plate
2U
14.00”
19.00”
50 lbs.
RMK3-14-__(partial no.)*
Shelf with custom face plate
3U
14.00”
19.00”
50 lbs.
RMK4-14-__(partial no.)*
RMK5-14-__(partial no.)*
RMK2-18-__(partial no.)*
RMK3-18-__(partial no.)*
RMK4-18-__(partial no.)*
RMK5-18-__(partial no.)*
Shelf with custom face plate
Shelf with custom face plate
Shelf with custom face plate
Shelf with custom face plate
Shelf with custom face plate
Shelf with custom face plate
4U
5U
2U
3U
4U
5U
14.00”
14.00”
18.00”
18.00”
18.00”
18.00”
19.00”
19.00”
19.00”
19.00”
19.00”
19.00”
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
50 lbs.
*Visit lowellmfg.com for more information.
RMK Series Kit comes with an RMK shelf and
a custom face plate to fit your equipment. Rack
and equipment purchased separately
RMK414 see pg. 59
To help us fabricate your custom face plate with precision
accuracy select one of the two ordering options below:
1) Ship your equipment to Lowell Manufacturing to measure. This is the preferred
option to ensure accuracy since the front of equipment is often sculpted/angled or
has setbacks and moving components (CD’s) that require the face plate to be fitted
rather than simply framed. We will be careful with your equipment and ship it back
in the carton received within two business days (please include contact information
below). OR . . .
2) Take measurements using the template below and email or fax us the data.
Information to include:
Fax to 636-257-6606 or email [email protected]
Partial Model Numbers
Due to the custom design of these products a custom model
number is required. To obtain a complete model number for kits
or the stand-alone custom face plate fill in the information to the
right. A custom number will be created for your product.
You can also visit lowellmfg.com, search for RMK and click on
the link for a list of products already in our system.
Company Name ________________________________________________________________________________
Address ______________________________________________________________________________________
Contact Name ________________________________________
Contact Email ___________________________
Tel: ___________________Fax: ______________________PO Number:___________Date: ___________________
Equipment Manufacturer/Brand ___________________________Model Number _____________________________
Dimensions (see diagrams below): Overall Width ___________Overall Depth __________Chassis Height ___________
Foot Clearance ___________________Foot Height _____________________Foot Depth_______________________
Special Notes (opening CD drawers, tape drives, etc.): __________________________________________________
____________________________________________________________________________________________
Lowell’s custom face
plate mounts separately,
after the RMK shelf has
been secured to the rack.
When equipment
changes, you can order a
new face plate without
removing the shelf.
Face plate
opening will be
1/16” larger
than equip. on
all sides
FRONT
SIDE
Overall Width
Overall Depth
Chassis Height
Foot Height
Foot Clearance
60
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Foot Depth
STORAGE / DRAWERS & LINERS
Storage
SBL Series. . . . . . . . . . . . Fully welded 16-ga. steel storage box with front door
hinged along bottom mounts to front rack rails using
standard E.I.A. spacing. Smooth black powder epoxy
finish. Features slam-latch closure and keyed lock.
Model No.
SBL-39
SBL-49
Height
Depth
Width
Lock
Load Capacity
3U
4U
8.99”
8.99”
19.00”
19.00”
yes
yes
50 lbs.
50 lbs.
SBL-39
Media Holder . . . . . . . . . . 16-ga. steel media holder with metal dividers holds standard CDs/DVDs. Black.
Model No.
Height
Depth
MH4-CD
4U
5.40”
MH5-DVD
5U
5.50”
*Shelf does not include jewel cases.
Width
Load Capacity
19.00”
19.00”
42 CD (0.2”W)
27 DVD (0.56”W)
MH4-CD *
Drawers
UDE Series . . . . . . . . . . . Fully-welded 16-ga. steel utility drawer with ball-bearing
slides has plastic bushing in rear for wire pass-through
(up to 1.06” diameter). Mounts to front rack rails on
standard E.I.A. spacing. Smooth black powder epoxy
finish. Mounting hardware not included. Optional keyed
lock.
Model No.
Height
Depth
Width
Lock
Load Capacity
UDE-214
2U
14.50”
19.00”
---
50 lbs.
UDEL-214
2U
14.50”
19.00”
yes
50 lbs.
UDE-314
3U
14.50”
19.00”
---
50 lbs.
UDEL-314
3U
14.50”
19.00”
yes
50 lbs.
UDE-414
4U
14.50”
19.00”
---
50 lbs.
UDEL-414
4U
14.50”
19.00”
yes
50 lbs.
UDP Series . . . . . . . . . . . Heavy duty, fully-welded, 16-ga. steel utility drawer has
ball-bearing slides and plastic bushing in rear for wire
pass-through (up to 1.06” diameter). Mounts to front
rack rails on standard E.I.A. spacing. Smooth black
powder epoxy finish. Includes recessed drawer pull,
slam-latch closure, keyed lock for security and perforated mat liner.
Model No.
Height
Depth
Width
Lock
Load Capacity
UDP-214
2U
14.50”
19.00”
yes
50 lbs.
UDP-314
3U
14.50”
19.00”
yes
50 lbs.
UDP-414
4U
14.50”
19.00”
yes
50 lbs.
UDP-614
6U
14.50”
19.00”
yes
50 lbs.
Rear
plastic
bushing
UDE-214
UDP-214
UDP interior with
perforated mat liner
Drawer Liners
DFI Series . . . . . . . . . . . . Thick die-cut foam allows you to pick-and-pull squares
to create custom nests for sensitive electronics, keeping
them secure. Includes 0.375” foam base.
Model No.
Drawer Height
Depth
Width
DFI-2
2U
14.00”
15.50”
DFI-3
3U
14.00”
15.50”
DFI-4
4U
14.00”
15.50”
CDM . . . . . . . . . . . . . . . . . Non-slip perforated drawer mat (included with UDP Series drawers).
Model No.
Depth
Width
CDM
14.00”
15.50”
DFI foam liner
CDM
61
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
CABLE MANAGEMENT
Horizontal-Mount
Brush Strip Panels . . . . . 16-ga. steel panel with tray and brush strip allows
cable bundles to be routed between bristles, keeping dust and contaminants at bay while giving an assist to thermal management. Black semi-gloss
enamel finish.
CBP-1
Model No.
Description
Depth
Width
CBP-1
1U brush panel
3.00”
19.00”
CBP-2
2U brush Panel
3.00”
19.00”
Stackable Bars . . . . . . . . 14-ga. steel slotted bars can be used independently
or stacked on a horizontal plane to save rack space.
A straight bar can be mounted at a right angle to another straight bar for dual-lacing configuration in 1U
space. Bars also serve as support bracing for equipment when used with mid or rear rails. Black powder
CMBS Series slotted bars can
epoxy finish. Pack of ten.
be stacked in many different
CMBS
CMBS-2
CMBS-4
CMBS-6
configurations. This example
shows cable management and
equipment brace set-up.
Model No.
Description
CMBS
Straight bar
Offset
Width
---
19.00”
CMBS-2
CMBS-4
Offset bar
2.00”
19.00”
Offset bar
4.00”
CMBS-6
19.00”
Offset bar
6.00”
19.00”
Stackable Flat Wire . . . . 11-ga. steel flat wire with smooth rounded edges can
be used independently or stacked on a horizontal
Equipment brace
plane to save rack space while separating cables.
Features multiple tiedown slots and holes. Robust
design can be used as support bracing for equipCable mangement
ment when used with mid or rear rails. Smooth black
powder epoxy finish. Pack of ten.
CMFW
CMFW-2
CMFW-4
CMFW Series flat wire can be
stacked in many different configurations. Both examples
show cable management but
the top option can also help
brace equipment.
CMR
Model No.
Description
CMFW
Straight flat wire
Offset
Width
---
19.00”
CMFW-2
CMFW-4
Offset flat wire
1.75”
19.00”
Offset flat wire
4.00”
19.00”
Steel Rods . . . . . . . . . . . Cable management steel rod with 0.25” diameter.
Black finish. Pack of ten.
CMR2
CMR4
CMCD-1HV
CMC-1HV
Model No.
Description
CMR
Straight rod
Offset
Width
---
19.00”
CMR2
CMR4
Offset rod
1.5.”
19.00”
Offset rod
4.00”
19.00”
Flex-Clip Panels . . . . . . . 16-ga. steel panel with plastic flex-clips that rotate individually for horizontal or vertical cable management. Optional steel D-rings on ends for open frame
data racks extend beyond rack width for vertical routing. Black powder epoxy finish.
Model No.
Description
D-rings on Ends
Width
CMC-1HV
1U panel, flex-clips
---
19.00”
CMCD-1HV
1U panel, flex-clips
2
19.00”+
D-Ring Panels . . . . . . . . 16-ga. steel panel with D-rings welded along center
and optional D-rings on ends for open frame data
racks to route cables vertically (end D-rings extend
beyond rack width). For localized cable routing, a
single D-ring on a 2U bracket punched on E.I.A.
spacing is also available.
CMD-2HV
CMD-2H
CMD-2V
Model No.
Description
CMD-1H
1U panel, D-rings
D-rings on Ends
Width
---
19.00”
19.00”+
CMD-1HV
1U panel, D-rings
2
CMD-2H
2U panel, D-rings
---
19.00”
CMD-2HV
2U panel, D-rings
2
19.00”+
CMD-2V
2U D-ring on bracket
---
0.875”
62
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Slotted Panels . . . . . . . . 16-ga. steel panel with flange and slots for cable lacing.
Smooth black powder epoxy finish. Pack of ten.
Model No.
Description
CMPS-1
1U slotted panel
19.00”
Width
CMPS-2
2U slotted panel
19.00”
CMPS-2
CMHT2-1936
Telescoping Panels . . . . 18-ga. steel panel with flange mounts front-to-back
within a rack extending to provide a versatile solution for
wire and cable management. Black powder epoxy finish.
Pack of two.
Model No.
Description
CMHT1-1730
1U telescoping panel
17.00” - 30.00”
CMHT2-1936
2U telescoping panel
19.00” - 36.00”
Extends
Extension
Vertical-Mount
Width
18U
2.00”
CMV2-35
35U
2.00”
CMV2-44
44U
2.00”
CMV3-12
12U
3.25”
CMV3-24
24U
3.25”
CMV3-35
35U
3.25”
CMV3-40
40U
3.25”
CMV3-44
44U
3.25”
CMV5-24
24U
4.75”
CMV5-35
35U
4.75”
CMV5-40
40U
4.75”
CMV5-44
44U
4.75”
Cable Chase . . . . . . . . . . 16-ga. steel cable chase for 44U LGR Series gangable
racks (27”-42” depth) provides 4” space for wiring between racks or at the end of a multi-bay configuration.
LXR Cable Chase
Beveled edges emulate rack design. Includes bolt-on
See model numbers specific to
front, rear and top plus joining hardware. Top has comthe LXR series on page 30.
pound knockouts (2”-1”). Black wrinkle powder epoxy
finish. Ships unassembled.
Model No.
Racking Height
Channel Depth
Overall Depth
LCC4-4427
44U
4.00”
27.00”
LCC4-4432
44U
4.00”
32.00”
LCC4-4436
44U
4.00”
36.00”
LCC4-4442
44U
4.00”
42.00”
CMV5-35
Racking Height
CMV2-18
CMV3-35
Model No.
CMV2-35
Vertical Panels . . . . . . . . Steel panel with multiple lacing slots provides verticalmount cable management solution. 2”W panels are
11-ga. steel; other widths are 16-ga. steel. Smooth black
powder epoxy finish. Pack of six.
LCC4-4432
Cabling Aids
Bushings . . . . . . . . . . . . . Plastic bushings snap into access holes along the (rear)
vertical sides of LGR Series gangable racks to protect
cables running between racks. Bag of 12.
Model No.
Description
LGRB-12
Plastic bushings
LGRB-12
Cable Wraps . . . . . . . . . . Velcro cable wraps for light-duty settings are handy for
AV connections, networking equipment or to hold cables out of the way during installation. Maximum bundle
diameter 1.75”. Each wrap measures approximately
8” x 0.5”. Bag of 12.
Model No.
Description
VCW-12
Cable wraps
VCW-12
63
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
THERMAL MANAGEMENT
Fan Panels with Universal Power Supply
FDC4-2T
Thermostat probe
FDC Series . . . . . . . . . . . Super quiet fans with universal (100–240VAC) input voltage, 6-ft. cord and four plug adaptors for North America,
central Europe, the U.K. and Australia/New Zealand/South
Pacific. Includes thermostat probe which increases and
decreases fan speed as temperature reaches set points.
The single fan kit (FDC1-KITT) can mount anywhere along
Lowell’s unique rack vents*. UL Listed power supply.
FDC1-KITT
Model
No.
VAC
Style
Qty.
Fan
Total
Fans Diameter Airflow
FDC2-2T 100-240 19”W x 2U panel 2
3.15”
6dBA
Yes
FDC4-2T 100-240 19”W x 2U panel 4
3.15” 104cfm 29dBA
Yes
FDC1-KITT
4.70”
Yes
Single fan kit
1
52cfm
Noise Thermo
Rating Probe
73cfm
33dBA
Whisper Fan Panels
Standard cord
Optional thermo-cord has
a built-in thermostat.
FW Series . . . . . . . . . . . . Whisper fans in a 19” panel, rear door panel or single fan
kit. The rear door panel and single fan kit mount anywhere
along Lowell’s unique rack vents*. Choose standard cord or
thermo-cord with built in thermostat to control fan activation.
FW2-3
FW1-KIT
Model
No.
VAC
Style
Qty.
Fan
Fans Diameter
FW2-3
120
19”W x 3U panel
2
FW2-3T
120
19”W x 3U panel
2
Total
Airflow
Noise
Rating
Cord
4.70”
100cfm 31dBA
Std.
4.70”
100cfm 31dBA Thermo
FW3-3
120
19”W x 3U panel
3
4.70”
150cfm 33dBA
FW3-3T
120
19”W x 3U panel
3
4.70”
150cfm 33dBA Thermo
Std.
FW4-7
120
19”W x 7U panel
4
4.70”
200cfm 34dBA
FW4-7T
120
19”W x 7U panel
4
4.70”
200cfm 34dBA Thermo
FW2-RD
120
Rear door panel
2
4.70”
100cfm 31dBA
FW2-RDT
120
Rear door panel
2
4.70”
100cfm 31dBA Thermo
Std.
Std.
FW1-KIT
120
Single fan kit
1
4.70”
50cfm
28dBA
FW1-KITT
120
Single fan kit
1
4.70”
50cfm
28dBA Thermo
FW2-3E
240
19”W x 3U panel
2
120mm 100cfm 31dBA
Std.
FW1-KITE
240
Single fan kit
1
120mm
Std.
FW-FF
50cfm
28dBA
Std.
Optional fan filter for whisper fans
Turbo Fan Panels
FT Series . . . . . . . . . . . . . Single turbo fan in 16-ga. steel 19” panel provides powerful cooling for rackmounted equipment. Includes fan
guards, choose standard cord or thermo-cord. UL Listed.
CE approved.
FT1-7
Model
No.
VAC
Style
Qty.
Fan
Fans Diameter
Total
Airflow
Noise
Rating
FT1-7
115
19”W x 7U panel
1
10.00” 550cfm 50.8dBA
FT1-7T
115
19”W x 7U panel
1
10.00” 550cfm 50.8dBA Thermo
FT1-7E
240
19”W x 7U panel
1
254mm 550cfm 50.8dBA
Std.
Std.
Rack Thermostat
FTC-1
FTC-1 . . . . . . . . . . . . . . . Thermostat controls rack fans for efficient operation. Features, 15A duplex receptacle, and 6-ft. cord. UL Listed (T-stat).
Model No.
Description
Size
FTC-1
125VAC thermostat
10.00” x 3.00” x 3.00”
FTC-1E
240VAC thermostat
254mm x 76mm x 76mm
Magnetic Vent Blockers
MVB Series . . . . . . . . . . . Kits to aid active thermal management.
Model No.
Quantity
For Rack
MVBLGR
1 front, 1 rear
LGR Series
MVBLWR
1 front, 2 side
LWR (19”D or 23”D)
MVBLWBR
1 front, 2 side
LWBR Series
MVB22
1 front, 2 side, 1 rear
LER (22”D)
MVB27
1 front, 2 side, 1 rear
LER (27”D)
MVB32
1 front, 2 side, 1 rear
LER (32”D)
Magnetic vent blocker
64
Cord
* See rack spec sheets
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
MOUNTING RAILS
Mounting Rails
RRD . . . . . . . . . . . . . . . . . For rack series LER, LFR, LGR, LPR, LSER, LSGR,
LWBR, LWR. 11-ga. steel with black semi-gloss finish
and round holes tapped 10-32. Printed RU scale facilitates set-up. Sold in pairs. Mounting hardware included.
Model No.
Racking Height
Material
Mtg Hardware
RRD-7
7U
11-ga. steel
yes
RRD-10
10U
11-ga. steel
yes
RRD-12
12U
11-ga. steel
yes
RRD-14
14U
11-ga. steel
yes
RRD-16
16U
11-ga. steel
yes
RRD-18
18U
11-ga. steel
yes
RRD-21
21U
11-ga. steel
yes
RRD-24
24U
11-ga. steel
yes
RRD-35
35U
11-ga. steel
yes
RRD-40
40U
11-ga. steel
yes
RRD-44
44U
11-ga. steel
yes
RRD-7
TOP
VIEW
1.50”
1.937”
RRN. . . . . . . . . . . . . . . . . . For rack series LGNR and LGVR. 11-ga. steel with black
semi-gloss finish and round holes tapped 10-32. Sold in
pairs. Mounting hardware included.
Model No.
Racking Height
Material
Mtg Hardware
RRN-24
24U
11-ga. steel
yes
RRN-37
37U
11-ga. steel
yes
RRN-40
40U
11-ga. steel
yes
RRN-44
44U
11-ga. steel
yes
RRN-24
1.413”
RRTF. . . . . . . . . . . . . . . . . For rack series LDSR, LWER, LWSR. 11-ga. steel with
black semi-gloss finish and round holes tapped 10-32.
Sold in pairs. Mounting hardware included.
Model No.
Racking Height
Material
Mtg Hardware
RRTF-7
7U
11-ga. steel
yes
RRTF-10
10U
11-ga. steel
yes
RRTF-12
12U
11-ga. steel
yes
RRTF-14
14U
11-ga. steel
yes
RRTF-16
16U
11-ga. steel
yes
TOP
VIEW
1.375”
RRTF-7
TOP
VIEW
1.50”
0.625”
RRT . . . . . . . . . . . . . . . . . For custom millwork. Same as RRTF Series above but
mounting hardware is not included.
Model No.
Racking Height
Material
Mtg Hardware
RRT-7
7U
11-ga. steel
---
RRT-10
10U
11-ga. steel
---
RRT-12
12U
11-ga. steel
---
RRT-14
14U
11-ga. steel
---
RRT-16
16U
11-ga. steel
---
RRT-21
21U
11-ga. steel
---
RRT-24
24U
11-ga. steel
---
RRT-28
28U
11-ga. steel
---
RRT-30
30U
11-ga. steel
---
RRT-32
32U
11-ga. steel
---
RRT-40
40U
11-ga. steel
---
RRT-46
46U
11-ga. steel
---
RRT-7
Specialty mounting rails
See mounting rails specific to the LLR Series
on page 15, LGTR Series on page 20.
65
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
RACK DOORS
Front Door
LFD Series . . . . . . . . . . . . Surface-mount front door with 180˚ swing mounts left or
right. Door extends 1” from rack frame and is fieldchangeable even after equipment has been installed.
Features recessed handle, keyed lock, beveled corners.
For rack series: LDTR, LER, LFR LGR, LGNR, LGVR,
LGTR, LPR, LSER, LSGR, LWBR, LWR, LWSR.
Model No.
Fully
Vented
Solid
Smoked
Plexiglass
Fully vented
hole pattern
Racking Height
Style
LFD-7
7U
Solid Steel
LFD-10
10U
Solid Steel
LFD-12
12U
Solid Steel
LFD-14
14U
Solid Steel
LFD-16
16U
Solid Steel
LFD-18
18U
Solid Steel
LFD-21
21U
Solid Steel
LFD-24
24U
Solid Steel
LFD-35
35U
Solid Steel
LFD-40
40U
Solid Steel
LFD-44
44U
Solid Steel
LFD-54
54U
Solid Steel
LFD-7P
7U
Smoked Plexiglass
LFD-10P
10U
Smoked Plexiglass
LFD-12P
12U
Smoked Plexiglass
LFD-14P
14U
Smoked Plexiglass
LFD-16P
16U
Smoked Plexiglass
LFD-18P
18U
Smoked Plexiglass
LFD-21P
21U
Smoked Plexiglass
LFD-24P
24U
Smoked Plexiglass
LFD-35P
35U
Smoked Plexiglass
LFD-40P
40U
Smoked Plexiglass
LFD-44P
44U
Smoked Plexiglass
LFD-7FV
7U
Fully-Vented
LFD-10FV
10U
Fully-Vented
LFD-12FV
12U
Fully-Vented
LFD-14FV
14U
Fully-Vented
LFD-16FV
16U
Fully-Vented
LFD-18FV
18U
Fully-Vented
LFD-21FV
21U
Fully-Vented
LFD-24FV
24U
Fully-Vented
LFD-35FV
35U
Fully-Vented
LFD-40FV
40U
Fully-Vented
LFD-44FV
44U
Fully-Vented
Rear Door
LRD Series . . . . . . . . . . . Recessed rear door mounts left or right with springloaded hinge pins (field changeable, no drilling). Includes keyed lock that can be replaced with optional
thumb cam latch for keyless entry (TLK, pg. 72). For
rack series: LER, LGR.
Model No.
Racking Height
Style
LRD-35FV
35U
Fully-Vented
LRD-40FV
40U
Fully-Vented
LRD-44FV
44U
Fully-Vented
Fully Vented
Rear Door
66
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Dual-Door Frame
LDDF Series . . . . . . . . . . Steel frame surface-mounts to left or right hinge on rack
front to accept two short doors in a Dutch door arrangement, enabling equipment to be secured in separate locations in a single rack installation. The 1”D frame can
be added to an existing installation. Black wrinkle powder epoxy finish. For rack series: LDTR, LER, LFR, LGR,
LGNR, LGVR, LPR, LSER, LSGR, LWBR, LWR, LWSR.
Order doors separately.
Model No.
Racking Height
For Use With
LDDF-21
21U
7U top door + 14U bottom door
LDDF-24
24U
10U top door + 14U bottom door
LDDF-35
35U
14U top door + 21U bottom door
LDDF-40
40U
16U top door + 24U bottom door
LDDF-44
44U
21U top door + 24U bottom door
Order doors separately, selecting one from the list below
(LFD Series with “RL” suffix) and one from the opposite
page (LFD Series).
Model No.
Racking Height
Style
LFD-7RL
7U
Solid Steel
LFD-10RL
10U
Solid Steel
LFD-14RL
14U
Solid Steel
LFD-16RL
16U
Solid Steel
LFD-21RL
21U
Solid Steel
LFD-24RL
24U
Solid Steel
LFD-14PRL
14U
Smoked Plexiglass
LFD-21PRL
21U
Smoked Plexiglass
LFD-24PRL
24U
Smoked Plexiglass
LFD-14FVRL
14U
Fully-Vented
LFD-21FVRL
21U
Fully-Vented
LFD-24FVRL
24U
Fully-Vented
LDDF-35
Sample installation with
small plexi-glass top
door and fully-vented
bottom door.
SPECIALTY TOPS
Laminate Top
LGT Series. . . . . . . . . . . . Laminate-covered top (1”H) features rubber edge molding and “Graphite Grey” finish. Includes mounting hardware. For racks 18U, 21U or 24U with appropriate depth.
Model
No.
Depth
Width
Height
For Use With
Rack Depth
LGT-22
24.06”
24.69”
1.00”
22.00”
LGT-27
29.06”
24.69”
1.00”
27.00”
LGT-32
34.06”
24.69”
1.00”
32.00”
LGT-22
Steel Top
LPTR-TC . . . . . . . . . . . . . 16-gauge steel top for the LPTR Series Pull & Turn rack.
Flat black powder epoxy finish. Made in the U.S.A.
Model No.
Description
Depth
Width
Height
LPTR-TC
Steel top cover
16.35”
18.81”
1.75”
LPTR-TC
Steel Vented Top Panel
SVSP . . . . . . . . . . . . . . . . 18-gauge steel slotted top panel for open top racks.
Model No.
Height
Width
Finish
Panel Qty.
SVSP-3
3U
19.00”
Black Semi-Gloss
1
SVSP-4
4U
19.00”
Black Semi-Gloss
1
SVSP-7
7U
19.00”
Black Semi-Gloss
1
SVSP-7
67
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
PANELS & SECURITY COVERS
Multi-PAK options for ordering panels in
bulk are convenient and cost-effective.
Brushed Black
Anodized
Black
Semi-Gloss
MULTI-PAK OPTIONS
FINISHES
Black
Wrinkle
Contractor Carton
(CC) Multi-PAK
Stocking Carton
(SC) Multi-PAK
Master Carton
(MC) Multi-PAK
Blank Flat Panels
0.125” Aluminum . . . . . . Model No.
MULTI-PAK
Blank flat aluminum panel.
Racking Height
Width
Finish
Panel Qty.
AFP-1
1U
19.00”
Black Wrinkle
1
AFP-2
2U
19.00”
Black Wrinkle
1
AFP-3
3U
19.00”
Black Wrinkle
1
AFP-4
4U
19.00”
Black Wrinkle
1
AFP-5
5U
19.00”
Black Wrinkle
1
AFP-6
6U
19.00”
Black Wrinkle
1
AFP-1CC
1U
19.00”
Black Wrinkle
12
AFP-2CC
2U
19.00”
Black Wrinkle
12
AFP-3CC
3U
19.00”
Black Wrinkle
6
AFP-4CC
4U
19.00”
Black Wrinkle
6
AFPB-1
1U
19.00”
Brushed Black Anodized
1
AFPB-2
2U
19.00”
Brushed Black Anodized
1
AFPB-3
3U
19.00”
Brushed Black Anodized
1
AFPB-4
4U
19.00”
Brushed Black Anodized
1
Panel Qty.
14-Gauge Steel . . . . . . . . Model No.
MULTI-PAK
Blank flat steel panel.
Racking Height
Width
Finish
SEFP-1
1U
19.00”
Black Semi-Gloss
1
SEFP-2
2U
19.00”
Black Semi-Gloss
1
SEFP-3
3U
19.00”
Black Semi-Gloss
1
SEFP-4
4U
19.00”
Black Semi-Gloss
1
SEFP-5
5U
19.00”
Black Semi-Gloss
1
SEFP-6
6U
19.00”
Black Semi-Gloss
1
48
SEFP-1MC
1U
19.00”
Black Semi-Gloss
SEFP-2SC
2U
19.00”
Black Semi-Gloss
24
SEFP-1CC
1U
19.00”
Black Semi-Gloss
12
12
SEFP-2CC
2U
19.00”
Black Semi-Gloss
SEFP-3CC
3U
19.00”
Black Semi-Gloss
6
SEFP-4CC
4U
19.00”
Black Semi-Gloss
6
Blank Formed Panels
0.050” Aluminum. . . . . . . Model No.
MULTI-PAK
Blank formed aluminum panel.
Racking Height
Width
Finish
Panel Qty.
AP-1
1U
19.00”
Black Wrinkle
1
AP-2
2U
19.00”
Black Wrinkle
1
AP-3
3U
19.00”
Black Wrinkle
1
AP-4
4U
19.00”
Black Wrinkle
1
AP-5
5U
19.00”
Black Wrinkle
1
AP-6
6U
19.00”
Black Wrinkle
1
AP-1CC
1U
19.00”
Black Wrinkle
12
AP-2CC
2U
19.00”
Black Wrinkle
12
AP-3CC
3U
19.00”
Black Wrinkle
6
AP-4CC
4U
19.00”
Black Wrinkle
6
APB-1
1U
19.00”
Brushed Black Anodized
1
APB-2
2U
19.00”
Brushed Black Anodized
1
APB-3
3U
19.00”
Brushed Black Anodized
1
APB-4
4U
19.00”
Brushed Black Anodized
1
68
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
18-Gauge Steel . . . . . . . . Model No.
Racking Height
Width
Finish
Panel Qty.
SEP-05
1/2U
19.00”
Black Semi-Gloss
1
SEP-1
1U
19.00”
Black Semi-Gloss
1
SEP-2
2U
19.00”
Black Semi-Gloss
1
SEP-3
3U
19.00”
Black Semi-Gloss
1
SEP-4
4U
19.00”
Black Semi-Gloss
1
SEP-5
5U
19.00”
Black Semi-Gloss
1
SEP-6
6U
19.00”
Black Semi-Gloss
1
SEP-1MC
1U
19.00”
Black Semi-Gloss
48
SEP-2SC
2U
19.00”
Black Semi-Gloss
24
SEP-1CC
1U
19.00”
SEP-2CC
SEP-3CC
2U
3U
19.00”
19.00”
Black Semi-Gloss
Black Semi-Gloss
12
12
Black Semi-Gloss
6
SEP-4CC
4U
19.00”
Black Semi-Gloss
6
SP-1
1U
19.00”
Black Wrinkle
1
SP-2
2U
19.00”
Black Wrinkle
1
SP-3
3U
19.00”
Black Wrinkle
1
SP-4
4U
19.00”
Black Wrinkle
1
SP-5
5U
19.00”
Black Wrinkle
1
SP-6
6U
19.00”
Black Wrinkle
1
SP-7
7U
19.00”
Black Wrinkle
1
SP-1CC
1U
19.00”
Black Wrinkle
12
SP-2CC
2U
19.00”
Black Wrinkle
12
SP-3CC
3U
19.00”
Black Wrinkle
6
SP-4CC
4U
19.00”
Black Wrinkle
6
Blank formed steel panel.
10.40” W Half Rack Panels
MULTI-PAK
MULTI-PAK
See Lowell’s Half Rack Panels and
accessories, on page 43.
Vent Panels (Slotted)
Racking Height
Width
Finish
Panel Qty.
AVPB-1
1U
19.00”
Brushed Black Anodized
1
AVPB-2
2U
19.00”
Brushed Black Anodized
1
18-Gauge Steel . . . . . . . . Model No.
Vented aluminum panel with slots.
Racking Height
Width
Finish
Panel Qty.
SVSP-1
1U
19.00”
Black Semi-Gloss
1
SVSP-2
2U
19.00”
Black Semi-Gloss
1
SVSP-1MC
1U
19.00”
Black Semi-Gloss
48
SVSP-2SC
2U
19.00”
Black Semi-Gloss
24
SVSP-1CC
1U
19.00”
Black Semi-Gloss
12
SVSP-2CC
2U
19.00”
Black Semi-Gloss
12
MULTI-PAK
0.050” Aluminum . . . . . . Model No.
Vent Panels for Rack Tops
See larger vent panels (SVSP-3, SVSP-4 or
SVSP-7) typically used for rack tops, on page 67.
Vent Panels (Staggered Holes)
Width
Open Area
Finish
Panel Qty.
1U
19.00”
35%
Black Semi-Gloss
1
SVP-2
2U
19.00”
35%
Black Semi-Gloss
1
SVP-3
3U
19.00”
35%
Black Semi-Gloss
1
SVP-4
4U
19.00”
35%
Black Semi-Gloss
1
SVP-1CC
1U
19.00”
35%
Black Semi-Gloss
12
SVP-2CC
2U
19.00”
35%
Black Semi-Gloss
12
SVP-3CC
3U
19.00”
35%
Black Semi-Gloss
6
SVP-4CC
4U
19.00”
SVPL-1
SVPL-2
1U
2U
19.00”
19.00”
35%
63%
Black Semi-Gloss
Black Semi-Gloss
6
1
63%
Black Semi-Gloss
1
SVPL-3
3U
19.00”
63%
Black Semi-Gloss
1
SVPL-4
4U
19.00”
63%
Black Semi-Gloss
1
SVPL-1CC
1U
19.00”
63%
Black Semi-Gloss
12
SVPL-2CC
2U
19.00”
63%
Black Semi-Gloss
12
SVPL-3CC
3U
19.00”
63%
Black Semi-Gloss
6
SVPL-4CC
4U
19.00”
63%
Black Semi-Gloss
6
Vent panel with staggered holes (63% open area)
63%
open
MULTI-PAK
Racking Height
SVP-1
35%
open
MULTI-PAK
18-Gauge Steel . . . . . . . . Model No.
69
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
PANELS & SECURITY COVERS,
CONTINUED
Identification Panel
ID Panel . . . . . . . . . . . . . . Steel panel has label pocket to identify equipment
mounted above and below it.
IP-ID-1
Model No.
Racking Height
Width
Label Area
Material
1U
19.00”
Yes
18-ga.
IP-ID-1
Knockout Panels
Knockout Panel . . . . . . . Pair of steel knockout panels punched for Neutrik Dseries panel connectors. For use in Lowell rack series
LER, LGR, LPR, LPPR, and LWR. Black.
KOP-N
Model No.
Width (Each)
Overall Height
Material
9.69”
2.69”
16-ga.
KOP-N
Punched Panels
Decora® Punches . . . . . . Steel panel with flange is punched for Decora® style
devices. Includes hardware. Some panels include a
label pocket.
D3P-ID-1
Model
No.
D3P-ID-2
D4P-1
Racking
Height
Width
Punches
Label
Area
Device
Mount
D3P-ID-1
1U
19.00”
3
Yes
Horizontal
16-ga.
D3P-ID-2
2U
19.00”
3
Yes
Horizontal
16-ga.
Material
D4P-1
1U
19.00”
4
---
Horizontal
18-ga.
D8P-ID-3
3U
19.00”
8
Yes
Vertical
18-ga.
D9P-ID-3 *
3U
19.00”
9
Yes
Vertical
18-ga.
* Panel can be used for up to four multi-gang devices mounted on alternate spacing. Confirm clearance for non-Lowell controls.
D9P-ID-3
DBB . . . . . . . . . . . . . . . . . Blank filler plates for unused positions. Black.
Model No. Description
DBB
N10P-ID-1
Carton Pack
DBB-4
Blank filler plates
4
DBB-50
Blank filler plates
50
DBB-100
Blank filler plates
100
Neutrik® Punches . . . . . . Steel panel with flange punched for Neutrik-D or
Switchcraft-E connectors includes black and nickelplated screws and label pocket. Order blank filler
plates from Neutrik (DBA).
Model No.
Racking Height
Width
Punches
Label Area
Material
N10P-ID-1
1U
19.00”
10
Yes
20-ga.
Wall Plate Punches . . . . . Steel panel punched for devices that have a 1-gang
standard, non-removable wall plate that installs with
two screws. Spacing is not suitable for 2-gang devices.
SG6P-3
Model No. Racking Height
SG6P-3
LVC-8P-ID2
3U
Width
Punches
Device Mount
Material
19.00”
6
Vertical
16-ga.
VC Punches . . . . . . . . . . Steel panel punched for volume controls such as
Lowell LVC Rackmount Series (visit lowellmfg.com for
more information). Includes plugs for unused positions and label pocket. Does not include devicemounting hardware. NOTE: Preloaded option
available. See online spec sheet.
Model No.
LVC-8P-ID2
70
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Racking Height
Width
Punches
Label Area
Material
2U
19.00”
8
Yes
18-ga.
Security Covers
Vented . . . . . . . . . . . . . . . Steel security cover has flange and vented front that
protrudes 1.5” to allow room for equipment knobs. Black
semi-gloss.
Model No.
Racking Height
Width
Material
SSC-1V
1U
19.00”
18-ga. steel
SSC-2V
2U
19.00”
18-ga. steel
SSC-3V
3U
19.00”
18-ga. steel
SSC-4V
4U
19.00”
18-ga. steel
SSC-2V
Plexiglass . . . . . . . . . . . . Security cover has steel frame with flange and smoked
plexiglass front that protrudes 1.5” to allow room for
equipment knobs.
Model No.
Racking Height
Width
Material
SSC-1P
1U
19.00”
16-ga. steel frame with plexiglass front
SSC-2P
2U
19.00”
16-ga. steel frame with plexiglass front
SSC-2P
HARDWARE
Screws & Cage Nuts
Top View
PilotPoint™ Screws . . . . 10-32 screws for threaded rails or cage nut applications
include captive washers for time-saving installation.
Black. Optional bits.
Model No.
PilotPoint Screw Type
RSP-25
Phillips Finish Head (10-32 x 0.875”)
25 pc. bag
Qty / Pkg
RSP-100
Phillips Finish Head (10-32 x 0.875”)
100 pc. bag
RSP-500
Phillips Finish Head (10-32 x 0.875”)
500 pc. jar
RS-25
Phillips Truss Head (10-32 x 0.875”)
25 pc. bag
RS-100
Phillips Truss Head (10-32 x 0.875”)
100 pc. bag
RS-500
Phillips Truss Head (10-32 x 0.875”)
500 pc. jar
RSR-50
Robertson Sq. Head (10-32 x 0.875”)
50 pc. bag
RSR-BIT
Pin Drive Bit (Robertson Square)
RSV-50
Torx Star Post Head (10-32 x 0.875”)
RSV-BIT
Pin Drive Bit (Torx Star)
RSP
RS
Screw Type
RSR
1
50 pc. bag
Top View
1
Screws . . . . . . . . . . . . . . Screws with separate washer for square-punched rails.
Black.
Model No.
RSV
RS1224-100
Qty / Pkg
RS1224-100
Phillips Pan Head (12-24 x 0.787”)
100 pc. bag
RS6MM-100
Phillips Pan Head (6mm)
100 pc. bag
Cage Nuts . . . . . . . . . . . . For use in square-punched rails. Black.
Model No.
Description
RCN1224-100
Cage Nuts (12-24)
100 pc. bag
Qty / Pkg
RCN6MM-100
Cage Nuts (6mm)
100 pc. bag
RCN1032-100
Cage Nuts (10-32)
100 pc. bag
RCN1032-100
71
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
HARDWARE,
CONTINUED
Miscellaneous
C2S
Casters . . . . . . . . . . . . . . Set of four (2”) swivel casters. Total load capacity
500 lbs.
Model No.
Description
C2S
Swivel casters
Quantity
1 set
NOTE: For casters specific to the LXR series see its individual rack page.
Ganging Hardware . . . . . 1/4-20” x 5/8” hex and kep nuts.
Model No.
Description
RGH-40
1/4-20” x 5/8” hex and kep nuts
Quantity
40 pc. bag
RGH-40
Grounding Bar . . . . . . . . 0.125” solid copper grounding bar (2”W) tapped
10-32. Lacing slots, tie-down points.
LK-FD
Model No.
Description
Length
Quantity
GBB-36
Copper bar
36.00”
1
GBB-72
Copper bar
72.00”
1
Keys . . . . . . . . . . . . . . . . Replacement keys for Lowell rack front or rear door.
GBB-36
TLK
Model No.
Description
Style
Quantity
LK-FD
Front door key
B399A
2
LK-RD
Rear door key
B644A
2
Latch . . . . . . . . . . . . . . . . Thumb-turn cam latch replaces key lock cylinder for
keyless entry to rack rear door.
Model No.
Description
TLK
Thumb-turn cam latch
Quantity
1
Levelers . . . . . . . . . . . . . . Set of four heavy duty leg levelers.
Model No.
Description
LL
Leg levelers
Quantity
1 set
LL
Protective Runner Kit . . . Plastic glides protect surfaces when rack is placed in
a slide-in application such as inside a cabinet or credenza. For rack series: LDSR, LHFR, LVR, LXR.
PRK
Model No.
Description
PRK
Plastic glides
Quantity
1 set
Rail Conversion Bracket . Rail conversion bracket enables front rails (or optional
rear rails) to change from fixed position to adjustable
style. For rack series: LDTR, LWER, LWSR. Includes
hardware.
RRTBF
Model No.
Description
RRTBF
Rail Conversion Bracket
Quantity
1 set
Utility Light . . . . . . . . . . . Light hangs or mounts to rack magnetically. 13W fluorescent bulb, shatter resistant lens, grounded
13A/120V outlet, 2 swivel hooks, detachable bracket,
6-ft. grounded cord. UL listed.
Model No.
Description
RL-1
Rack utility light
1
RL-1BULB
Replacement bulb
1
RL-1
72
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Quantity
RACK BASES
MOBILE / STATIONARY
Mobile Bases
LMB Series . . . . . . . . . . . 14-ga. steel base mounts inside rack frame creating
a platform flush with bottom rack space—ideal for
heavy equipment mounted in lowest rack position.
Adds 1.25” to rack height. Includes 3.00” swivel casters and hardware. Model numbers ending with “F”
have special casters made to protect fine floors like
wood, marble or tile. For rack series: LER, LFR, LGR.
Model No.
Depth
Width
Height
Total
Load Capacity
LMB-27
26.75”
22.81”
3.00”
1400 lbs.
LMB-32
31.75”
22.81”
3.00”
1400 lbs.
LMB-36
35.75”
22.81”
3.00”
1400 lbs.
LMB-42
41.75”
22.81”
3.00”
1400 lbs.
LMB-27F
26.75”
22.81”
3.00”
800 lbs.
LMB-32F
31.75”
22.81”
3.00”
800 lbs.
LMB-36F
35.75”
22.81”
3.00”
800 lbs.
LMB-27
LMSB Series . . . . . . . . . . 14-ga. steel cart mounts under rack frame adding
4.06” to height. Includes 3.00” swivel casters (two
locking). Model ending with “FL” has special casters
made to protect fine floors like wood, marble or tile.
For rack series: LER, LFR, LGR (with 22” depth).
Model No.
Depth
Width
Height
Total
Load Capacity
LMSB-22
21.88”
22.31”
4.06”
1400 lbs.
LMSB-22FL
21.88”
22.31”
4.33”
800 lbs.
LMSB-22FL
Stationary Bases
LSB Series. . . . . . . . . . . . 16-ga. steel base mounts inside rack frame creating a
platform flush with bottom rack space—ideal for heavy
equipment mounted in lowest rack position. Does not
increase rack height. For rack series: LER, LFR, LGR.
Model No.
Depth
Width
Height
LSB-22
20.38”
22.81”
3.00”
LSB-27
26.75”
22.81”
3.00”
LSB-32
31.75”
22.81”
3.00”
LSB-36
35.75”
22.81”
3.00”
LSB-42
41.75”
22.81”
3.00”
LSB-22
LSSB Series . . . . . . . . . . 16-ga. steel shallow base mounts inside rack frame
creating a sub-floor 2.25” below bottom rack space—
ideal to mount accessory devices on floor of installation. Does not increase rack height. For rack series:
LER, LFR, LGR (with 22” or 27” depth).
Model No.
Depth
Width
Height
LSSB-22
20.38”
22.81”
0.75”
LSSB-27
26.75”
22.81”
0.75”
LSSB-22
Specialty bases
See mobile and stationary bases specific to the LXR Series on page 30, for the LGNR on page 18, for the LGVR
on page 22, for the LGTR on page 20.
73
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
INDEX
A
AFP Series . . . . . . . . . . . . . . . . . . . . . . . 68
AFPB Series. . . . . . . . . . . . . . . . . . . . . . 68
AP Series . . . . . . . . . . . . . . . . . . . . . . . . 68
APB Series. . . . . . . . . . . . . . . . . . . . . . . 68
AVPB Series. . . . . . . . . . . . . . . . . . . . . . 69
B
Brush Strip Panels . . . . . . . . . . . . . . . . . 62
Bushings. . . . . . . . . . . . . . . . . . . . . . . . . 63
C
C2S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Cable Chase. . . . . . . . . . . . . . . . . . . . . . 63
Cable Management . . . . . . . . . . . . . . . . 62
Cable Wraps . . . . . . . . . . . . . . . . . . . . . . 63
Cabling Aids . . . . . . . . . . . . . . . . . . . . . . 63
Cage Nuts . . . . . . . . . . . . . . . . . . . . . . . 71
Casters . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CBP Series. . . . . . . . . . . . . . . . . . . . . . . 62
CDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
FS18-16 . . . . . . . . . . . . . . . . . . . . . . . . . 55
FS18-20 . . . . . . . . . . . . . . . . . . . . . . . . . 55
FT Series . . . . . . . . . . . . . . . . . . . . . . . . 64
FTC Series . . . . . . . . . . . . . . . . . . . . . . . 64
FW Series . . . . . . . . . . . . . . . . . . . . . . . 64
FW1-KIT . . . . . . . . . . . . . . . . . . . . . . . . . 64
FW1-KITE . . . . . . . . . . . . . . . . . . . . . . . . 64
FW1-KITT . . . . . . . . . . . . . . . . . . . . . . . . 64
FW-FF . . . . . . . . . . . . . . . . . . . . . . . . . . 64
FWS-215 . . . . . . . . . . . . . . . . . . . . . . . . 59
G
Ganging Hardware . . . . . . . . . . . . . . . . . 72
GBB Series . . . . . . . . . . . . . . . . . . . . . . 72
Grounding Bar . . . . . . . . . . . . . . . . . . . . 72
H
Horizontal Cable Management . . . . . . . . 62
I
Identification Panel . . . . . . . . . . . . . . . . . 70
IP-ID-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Clamping Utility Shelves. . . . . . . . . . . . . 58
CMBS Series . . . . . . . . . . . . . . . . . . . . . 62
CMC-1HV . . . . . . . . . . . . . . . . . . . . . . . . 62
CMCD-1HV . . . . . . . . . . . . . . . . . . . . . . 62
CMD Series . . . . . . . . . . . . . . . . . . . . . . 62
CMFW Series. . . . . . . . . . . . . . . . . . . . . 62
CMHT Series . . . . . . . . . . . . . . . . . . . . . 63
CMPS Series . . . . . . . . . . . . . . . . . . . . . 63
CMR Series . . . . . . . . . . . . . . . . . . . . . . 62
CMV Series . . . . . . . . . . . . . . . . . . . . . . 63
D
D3P-ID-1. . . . . . . . . . . . . . . . . . . . . . . . . 70
D3P-ID-2. . . . . . . . . . . . . . . . . . . . . . . . . 70
D4P-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
D8P-ID-3. . . . . . . . . . . . . . . . . . . . . . . . . 70
D9P-ID-3. . . . . . . . . . . . . . . . . . . . . . . . . 70
DBB Series. . . . . . . . . . . . . . . . . . . . . . . 70
DFI Series . . . . . . . . . . . . . . . . . . . . . . . 61
Drawer Liners . . . . . . . . . . . . . . . . . . . . . 61
Drawers . . . . . . . . . . . . . . . . . . . . . . . . . 61
D-Ring Panels . . . . . . . . . . . . . . . . . . . . 62
Dual-Door Frame . . . . . . . . . . . . . . . . . . 67
F
Fan Panels . . . . . . . . . . . . . . . . . . . . . . . 64
FDC Series. . . . . . . . . . . . . . . . . . . . . . . 64
FDC1-KITT . . . . . . . . . . . . . . . . . . . . . . . 64
FDC4-1HR . . . . . . . . . . . . . . . . . . . . . . . 43
FDC4-1HRT . . . . . . . . . . . . . . . . . . . . . . 43
Fixed Writing Surface . . . . . . . . . . . . . . . 59
Flex-Clip Panels . . . . . . . . . . . . . . . . . . . 62
Front Doors. . . . . . . . . . . . . . . . . . . . . . . 66
FS Series . . . . . . . . . . . . . . . . . . . . . . . . 55
FS18-14 . . . . . . . . . . . . . . . . . . . . . . . . . 55
K
KDMS . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Keyboard/Monitor Shelf . . . . . . . . . . . . . 59
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Knockdown Shelf . . . . . . . . . . . . . . . . . . 59
Knockout Panels. . . . . . . . . . . . . . . . . . . 70
KOP-N . . . . . . . . . . . . . . . . . . . . . . . . . . 70
KSB Series. . . . . . . . . . . . . . . . . . . . . . . 59
KSE Series. . . . . . . . . . . . . . . . . . . . . . . 59
KSTB . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
L
LCC4 Series. . . . . . . . . . . . . . . . . . . . . . 63
LCDR-1824 . . . . . . . . . . . . . . . . . . . . . . 29
LCDR-2724 . . . . . . . . . . . . . . . . . . . . . . 29
LCDR-3524 . . . . . . . . . . . . . . . . . . . . . . 29
LCDR-4224 . . . . . . . . . . . . . . . . . . . . . . 29
LCDR Series . . . . . . . . . . . . . . . . . . . . . 29
LCR Series. . . . . . . . . . . . . . . . . . . . . . . 34
LCR-1016 . . . . . . . . . . . . . . . . . . . . . . . . 34
LCR-1018 . . . . . . . . . . . . . . . . . . . . . . . . 34
LCR-1216 . . . . . . . . . . . . . . . . . . . . . . . . 34
LCR-1218 . . . . . . . . . . . . . . . . . . . . . . . . 34
LCR-1418 . . . . . . . . . . . . . . . . . . . . . . . . 34
LCR-16RK . . . . . . . . . . . . . . . . . . . . . . . 34
LCR-18RK . . . . . . . . . . . . . . . . . . . . . . . 34
LCR-816 . . . . . . . . . . . . . . . . . . . . . . . . . 34
LCR-818 . . . . . . . . . . . . . . . . . . . . . . . . . 34
LDDF Series. . . . . . . . . . . . . . . . . . . . . . 67
LDSR Series . . . . . . . . . . . . . . . . . . . . . 39
LDTR Series. . . . . . . . . . . . . . . . . . . . . . 38
LDTR-RAC10 . . . . . . . . . . . . . . . . . . . . . 38
LDTR-RAC12 . . . . . . . . . . . . . . . . . . . . . 38
LDTR-RAC14 . . . . . . . . . . . . . . . . . . . . . 38
74
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
LDTR-RAC16 . . . . . . . . . . . . . . . . . . . . . 38
LDTR-RAC7 . . . . . . . . . . . . . . . . . . . . . . 38
Leg Levelers . . . . . . . . . . . . . . . . . . . . . . 72
LER Series . . . . . . . . . . . . . . . . . . . . . . . . 6
LER-1822 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-1827 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-1827-IAV . . . . . . . . . . . . . . . . . . . . . 56
LER-2122 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-2127 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-2127-IAV . . . . . . . . . . . . . . . . . . . . . 56
LER-2422 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-2427 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-2432 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-3522 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-3527 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-3527-IAV. . . . . . . . . . . . . . . . . . . . . 56
LER-3532 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-4022 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-4027 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-4032 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-4422 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-4427 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER-4432 . . . . . . . . . . . . . . . . . . . . . . . . . 7
LER---IAV Series . . . . . . . . . . . . . . . . . . 56
LFD Series . . . . . . . . . . . . . . . . . . . . . . . 66
LFD---RL Series . . . . . . . . . . . . . . . . . . . 67
LFR Series . . . . . . . . . . . . . . . . . . . . . . . 10
LFR-2122 . . . . . . . . . . . . . . . . . . . . . . . . 11
LFR-2422 . . . . . . . . . . . . . . . . . . . . . . . . 11
LFR-3522 . . . . . . . . . . . . . . . . . . . . . . . . 11
LFR-3527 . . . . . . . . . . . . . . . . . . . . . . . . 11
LFR-4027 . . . . . . . . . . . . . . . . . . . . . . . . 11
LFR-4427 . . . . . . . . . . . . . . . . . . . . . . . . 11
LGNR Series . . . . . . . . . . . . . . . . . . . . . 18
LGNR Side Panels . . . . . . . . . . . . . . . . . 19
LGNR-2427 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-2432 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-3727 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-3732 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-4027 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-4032 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-4036 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-4427 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-4432 . . . . . . . . . . . . . . . . . . . . . . 19
LGNR-4436 . . . . . . . . . . . . . . . . . . . . . . 19
LGR Series. . . . . . . . . . . . . . . . . . . . . . . 16
LGR Side Panels . . . . . . . . . . . . . . . . . . 17
LGR-2427. . . . . . . . . . . . . . . . . . . . . . . . 17
LGR-3527. . . . . . . . . . . . . . . . . . . . . . . . 17
LGR-3532. . . . . . . . . . . . . . . . . . . . . . . . 17
LGR-4022. . . . . . . . . . . . . . . . . . . . . . . . 17
LGR-4027. . . . . . . . . . . . . . . . . . . . . . . . 17
LGR-4032. . . . . . . . . . . . . . . . . . . . . . . . 17
LGR-4036. . . . . . . . . . . . . . . . . . . . . . . . 17
LGR-4042. . . . . . . . . . . . . . . . . . . . . . . . 17
LGR-4422. . . . . . . . . . . . . . . . . . . . . . . . 17
INDEX
LGR-4427. . . . . . . . . . . . . . . . . . . . . . . . 17
LPR Series . . . . . . . . . . . . . . . . . . . . . . . 26
LSGR Side Panels . . . . . . . . . . . . . . . . . 25
LGR-4432. . . . . . . . . . . . . . . . . . . . . . . . 17
LPR-1422 . . . . . . . . . . . . . . . . . . . . . . . . 27
LSGR-4027 . . . . . . . . . . . . . . . . . . . . . . 25
LGR-4436. . . . . . . . . . . . . . . . . . . . . . . . 17
LPR-1422FV. . . . . . . . . . . . . . . . . . . . . . 27
LSGR-4032 . . . . . . . . . . . . . . . . . . . . . . 25
LGR-4442. . . . . . . . . . . . . . . . . . . . . . . . 17
LPR-1422PGT . . . . . . . . . . . . . . . . . . . . 27
LSGR-4036 . . . . . . . . . . . . . . . . . . . . . . 25
LGRB-12 . . . . . . . . . . . . . . . . . . . . . . . . 63
LPR-1427 . . . . . . . . . . . . . . . . . . . . . . . . 27
LSGR-4427 . . . . . . . . . . . . . . . . . . . . . . 25
LGT Series . . . . . . . . . . . . . . . . . . . . . . . 67
LPR-1427FV. . . . . . . . . . . . . . . . . . . . . . 27
LSGR-4432 . . . . . . . . . . . . . . . . . . . . . . 25
LGTR Series . . . . . . . . . . . . . . . . . . . . . 20
LPR-1427PGT . . . . . . . . . . . . . . . . . . . . 27
LSGR-4436 . . . . . . . . . . . . . . . . . . . . . . 25
LGTR Side Panels . . . . . . . . . . . . . . . . . 21
LPR-2122 . . . . . . . . . . . . . . . . . . . . . . . . 27
LSSB Series . . . . . . . . . . . . . . . . . . . . . . 73
LGTR-5432. . . . . . . . . . . . . . . . . . . . . . . 21
LPR-2122FV. . . . . . . . . . . . . . . . . . . . . . 27
LVC-8P-ID2. . . . . . . . . . . . . . . . . . . . . . . 70
LGTR-5436. . . . . . . . . . . . . . . . . . . . . . . 21
LPR-2122PGT . . . . . . . . . . . . . . . . . . . . 27
LVR Series . . . . . . . . . . . . . . . . . . . . . . . 32
LGVR Series . . . . . . . . . . . . . . . . . . . . . 22
LPR-2427 . . . . . . . . . . . . . . . . . . . . . . . . 27
LVR14-1421 . . . . . . . . . . . . . . . . . . . . . . 33
LGVR-4432 . . . . . . . . . . . . . . . . . . . . . . 23
LPR-2427FV. . . . . . . . . . . . . . . . . . . . . . 27
LVR14-2128 . . . . . . . . . . . . . . . . . . . . . . 33
LGVR-4436 . . . . . . . . . . . . . . . . . . . . . . 23
LPR-2427PGT . . . . . . . . . . . . . . . . . . . . 27
LVR22-1421 . . . . . . . . . . . . . . . . . . . . . . 33
LHFR Series. . . . . . . . . . . . . . . . . . . . . . 42
LPSR Series. . . . . . . . . . . . . . . . . . . . . . 41
LVR22-2128 . . . . . . . . . . . . . . . . . . . . . . 33
LHR Series . . . . . . . . . . . . . . . . . . . . . . . 12
LPTR Series. . . . . . . . . . . . . . . . . . . . . . 36
LVR30-1421 . . . . . . . . . . . . . . . . . . . . . . 33
LHR-2432 . . . . . . . . . . . . . . . . . . . . . . . . 13
LPTR2-1019 . . . . . . . . . . . . . . . . . . . . . . 37
LVR30-2128 . . . . . . . . . . . . . . . . . . . . . . 33
LHR-3532 . . . . . . . . . . . . . . . . . . . . . . . . 13
LPTR2-1219 . . . . . . . . . . . . . . . . . . . . . . 37
LVR38-1421 . . . . . . . . . . . . . . . . . . . . . . 33
LHR-4432 . . . . . . . . . . . . . . . . . . . . . . . . 13
LPTR2-1419 . . . . . . . . . . . . . . . . . . . . . . 37
LVR38-2128 . . . . . . . . . . . . . . . . . . . . . . 33
LHR-4442 . . . . . . . . . . . . . . . . . . . . . . . . 13
LPTR2-1619 . . . . . . . . . . . . . . . . . . . . . . 37
LVR44-1421 . . . . . . . . . . . . . . . . . . . . . . 33
LHR-FD24 . . . . . . . . . . . . . . . . . . . . . . . 13
LPTR2-2119 . . . . . . . . . . . . . . . . . . . . . . 37
LVR44-2128 . . . . . . . . . . . . . . . . . . . . . . 33
LHR-FD24P . . . . . . . . . . . . . . . . . . . . . . 13
LPTR2-2419 . . . . . . . . . . . . . . . . . . . . . . 37
LVR8-1421 . . . . . . . . . . . . . . . . . . . . . . . 33
LHR-FD35 . . . . . . . . . . . . . . . . . . . . . . . 13
LPTR4-1019 . . . . . . . . . . . . . . . . . . . . . . 37
LVR8-2128 . . . . . . . . . . . . . . . . . . . . . . . 33
LHR-FD35P . . . . . . . . . . . . . . . . . . . . . . 13
LPTR4-1023 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR Series . . . . . . . . . . . . . . . . . . . . . 46
LHR-FD44 . . . . . . . . . . . . . . . . . . . . . . . 13
LPTR4-1219 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-2428 . . . . . . . . . . . . . . . . . . . . . . 47
LHR-FD44P . . . . . . . . . . . . . . . . . . . . . . 13
LPTR4-1223 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-2432 . . . . . . . . . . . . . . . . . . . . . . 47
LHR-RAC24V . . . . . . . . . . . . . . . . . . . . . 13
LPTR4-1419 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-3528 . . . . . . . . . . . . . . . . . . . . . . 47
LHR-RAC35V . . . . . . . . . . . . . . . . . . . . . 13
LPTR4-1423 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-3532 . . . . . . . . . . . . . . . . . . . . . . 47
LHR-RAC44V . . . . . . . . . . . . . . . . . . . . . 13
LPTR4-1619 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-4022 . . . . . . . . . . . . . . . . . . . . . . 47
LK-FD . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
LPTR4-1623 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-4028 . . . . . . . . . . . . . . . . . . . . . . 47
LK-RD. . . . . . . . . . . . . . . . . . . . . . . . . . . 72
LPTR4-2119 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-4032 . . . . . . . . . . . . . . . . . . . . . . 47
LL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
LPTR4-2123 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-4428 . . . . . . . . . . . . . . . . . . . . . . 47
LLR Series . . . . . . . . . . . . . . . . . . . . . . . 15
LPTR4-2419 . . . . . . . . . . . . . . . . . . . . . . 37
LWBR-BD4 . . . . . . . . . . . . . . . . . . . . . . . 47
LLR-1018-B. . . . . . . . . . . . . . . . . . . . . . . 15
LPTR4-2423 . . . . . . . . . . . . . . . . . . . . . . 37
LWER Series . . . . . . . . . . . . . . . . . . . . . 49
LLR-1218-B . . . . . . . . . . . . . . . . . . . . . . 15
LPTR4-2819 . . . . . . . . . . . . . . . . . . . . . . 37
LWER-1018. . . . . . . . . . . . . . . . . . . . . . . 49
LLR-1618-B . . . . . . . . . . . . . . . . . . . . . . 15
LPTR4-2823 . . . . . . . . . . . . . . . . . . . . . . 37
LWER-718 . . . . . . . . . . . . . . . . . . . . . . . 49
LLR-2118-B. . . . . . . . . . . . . . . . . . . . . . . 15
LPTR4-3019 . . . . . . . . . . . . . . . . . . . . . . 37
LWR Series . . . . . . . . . . . . . . . . . . . . . . 44
LLR-RRT-10 . . . . . . . . . . . . . . . . . . . . . . 15
LPTR4-3023 . . . . . . . . . . . . . . . . . . . . . . 37
LWR-1019 . . . . . . . . . . . . . . . . . . . . . . . . 45
LLR-RRT-12 . . . . . . . . . . . . . . . . . . . . . . 15
LPTR-NS . . . . . . . . . . . . . . . . . . . . . . . . 58
LWR-1023. . . . . . . . . . . . . . . . . . . . . . . . 45
LLR-RRT-16 . . . . . . . . . . . . . . . . . . . . . . 15
LPTR-TC . . . . . . . . . . . . . . . . . . . . . . . . 67
LWR-1219. . . . . . . . . . . . . . . . . . . . . . . . 45
LLR-RRT-21 . . . . . . . . . . . . . . . . . . . . . . 15
LRD Series. . . . . . . . . . . . . . . . . . . . . . . 66
LWR-1223. . . . . . . . . . . . . . . . . . . . . . . . 45
LMB Series. . . . . . . . . . . . . . . . . . . . . . . 73
LRND-40FV . . . . . . . . . . . . . . . . . . . . . . 19
LWR-1228. . . . . . . . . . . . . . . . . . . . . . . . 45
LMSB Series . . . . . . . . . . . . . . . . . . . . . 73
LRND-44FV . . . . . . . . . . . . . . . . . . . . . . 19
LWR-1232. . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR Series . . . . . . . . . . . . . . . . . . . . . 35
LRND-54FV . . . . . . . . . . . . . . . . . . . . . . 21
LWR-1619. . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR2-1019 . . . . . . . . . . . . . . . . . . . . . . 35
LRR Series . . . . . . . . . . . . . . . . . . . . . . . 14
LWR-1623. . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR2-1219. . . . . . . . . . . . . . . . . . . . . . 35
LRR-3815 . . . . . . . . . . . . . . . . . . . . . . . . 14
LWR-1628. . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR2-1419. . . . . . . . . . . . . . . . . . . . . . 35
LRR-4515 . . . . . . . . . . . . . . . . . . . . . . . . 14
LWR-1632. . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR2-1619. . . . . . . . . . . . . . . . . . . . . . 35
LRS Series . . . . . . . . . . . . . . . . . . . . . . . 40
LWR-2119 . . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR2-2119. . . . . . . . . . . . . . . . . . . . . . 35
LSB Series . . . . . . . . . . . . . . . . . . . . . . . 73
LWR-2123. . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR2-719 . . . . . . . . . . . . . . . . . . . . . . 35
LSER Series. . . . . . . . . . . . . . . . . . . . . . . 8
LWR-2419. . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR4-1019 . . . . . . . . . . . . . . . . . . . . . . 35
LSER-3527. . . . . . . . . . . . . . . . . . . . . . . . 9
LWR-2423 . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR4-1219. . . . . . . . . . . . . . . . . . . . . . 35
LSER-3532. . . . . . . . . . . . . . . . . . . . . . . . 9
LWR-2428 . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR4-1419. . . . . . . . . . . . . . . . . . . . . . 35
LSER-4027. . . . . . . . . . . . . . . . . . . . . . . . 9
LWR-2432 . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR4-1619. . . . . . . . . . . . . . . . . . . . . . 35
LSER-4032. . . . . . . . . . . . . . . . . . . . . . . . 9
LWR-3519. . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR4-2119. . . . . . . . . . . . . . . . . . . . . . 35
LSER-4427. . . . . . . . . . . . . . . . . . . . . . . . 9
LWR-3523 . . . . . . . . . . . . . . . . . . . . . . . 45
LPOR4-719 . . . . . . . . . . . . . . . . . . . . . . 35
LSER-4432. . . . . . . . . . . . . . . . . . . . . . . . 9
LWR-719. . . . . . . . . . . . . . . . . . . . . . . . . 45
LPPR-2432. . . . . . . . . . . . . . . . . . . . . . . 28
LSGR Series . . . . . . . . . . . . . . . . . . . . . 24
LWR-723 . . . . . . . . . . . . . . . . . . . . . . . . 45
75
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
INDEX
LWSR Series . . . . . . . . . . . . . . . . . . . . . 48
LWSR-1022 . . . . . . . . . . . . . . . . . . . . . . 48
LWSR-1222 . . . . . . . . . . . . . . . . . . . . . . 48
LWSR-1622 . . . . . . . . . . . . . . . . . . . . . . 48
LWSR-722 . . . . . . . . . . . . . . . . . . . . . . . 48
LWTCR Series . . . . . . . . . . . . . . . . . . . . 51
LWTCR-3R . . . . . . . . . . . . . . . . . . . . . . . 51
LWTCR-3S . . . . . . . . . . . . . . . . . . . . . . . 51
LWTR Series . . . . . . . . . . . . . . . . . . . . . 50
LWTR-3R . . . . . . . . . . . . . . . . . . . . . . . . 50
LWTR-3S . . . . . . . . . . . . . . . . . . . . . . . . 50
LXR Bundles . . . . . . . . . . . . . . . . . . . . . 57
LXR Series . . . . . . . . . . . . . . . . . . . . . . . 30
LXR Side Panels . . . . . . . . . . . . . . . . . . 31
LXR-1421 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-1421-IAV . . . . . . . . . . . . . . . . . . . . . 57
LXR-1426 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-2221 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-2226 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-3021 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-3021-IAV. . . . . . . . . . . . . . . . . . . . . 57
LXR-3026 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-3821 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-3821-IAV. . . . . . . . . . . . . . . . . . . . . 57
LXR-3826 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-4421 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-4421CC3 . . . . . . . . . . . . . . . . . . . . 31
LXR-4426 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-4426CC3 . . . . . . . . . . . . . . . . . . . . 31
LXR-821 . . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-826 . . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-C3S . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-C3SF . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD14 . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD14P . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD22 . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD22P . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD30 . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD30P . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD38 . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD38P . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD44 . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD44P . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD8 . . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-FD8P . . . . . . . . . . . . . . . . . . . . . . . 31
LXR---IAV Series . . . . . . . . . . . . . . . . . . 57
LXR-MB21 . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-MB21F . . . . . . . . . . . . . . . . . . . . . . 31
LXR-MB26 . . . . . . . . . . . . . . . . . . . . . . . 31
LXR-MB26F . . . . . . . . . . . . . . . . . . . . . . 31
LXR-NS21 . . . . . . . . . . . . . . . . . . . . . . . 58
LXR-NS26 . . . . . . . . . . . . . . . . . . . . . . . 58
LXR-RAC14 . . . . . . . . . . . . . . . . . . . . . . 31
LXR-RAC22 . . . . . . . . . . . . . . . . . . . . . . 31
LXR-RAC30 . . . . . . . . . . . . . . . . . . . . . . 31
LXR-RAC38 . . . . . . . . . . . . . . . . . . . . . . 31
LXR-RAC44 . . . . . . . . . . . . . . . . . . . . . . 31
LXR-RAC8 . . . . . . . . . . . . . . . . . . . . . . . 31
M
Magnetic Vent Blockers . . . . . . . . . . . . . 64
Media Holders . . . . . . . . . . . . . . . . . . . . 61
MH4-CD . . . . . . . . . . . . . . . . . . . . . . . . . 61
MH5-DVD . . . . . . . . . . . . . . . . . . . . . . . . 61
Mobile Bases . . . . . . . . . . . . . . . . . . . . . 73
Mounting Rails . . . . . . . . . . . . . . . . . . . . 65
MVB Series . . . . . . . . . . . . . . . . . . . . . . 64
N
N10P-ID-1. . . . . . . . . . . . . . . . . . . . . . . . 70
P
Panels . . . . . . . . . . . . . . . . . . . . . . . . . . 68
PRK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Protective Runner Kit . . . . . . . . . . . . . . . 72
Punched Panels . . . . . . . . . . . . . . . . . . . 70
R
Rail Conversion Bracket . . . . . . . . . . . . . 72
RCN1032-100. . . . . . . . . . . . . . . . . . . . . 71
RCN1224-100. . . . . . . . . . . . . . . . . . . . . 71
RCN6MM-100. . . . . . . . . . . . . . . . . . . . . 71
Rear Doors . . . . . . . . . . . . . . . . . . . . . . . 66
Reversible Shelf/Drawer . . . . . . . . . . . . . 59
RGH-40 . . . . . . . . . . . . . . . . . . . . . . . . . 72
RL-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
RL-1BULB . . . . . . . . . . . . . . . . . . . . . . . 72
RMK Series (Kit) . . . . . . . . . . . . . . . . . . 60
RMK Series . . . . . . . . . . . . . . . . . . . . . . 59
RMK-TCMP . . . . . . . . . . . . . . . . . . . . . . 59
RRD Series . . . . . . . . . . . . . . . . . . . . . . 65
RRN-24 . . . . . . . . . . . . . . . . . . . . . . . . . 19
RRN-37 . . . . . . . . . . . . . . . . . . . . . . . . . 19
RRN-40 . . . . . . . . . . . . . . . . . . . . . . . . . 19
RRN-44 . . . . . . . . . . . . . . . . . . . . . . . . . 19
RRNT-54. . . . . . . . . . . . . . . . . . . . . . . . . 21
RRT Series. . . . . . . . . . . . . . . . . . . . . . . 65
RRTBF . . . . . . . . . . . . . . . . . . . . . . . . . . 72
RRTF Series. . . . . . . . . . . . . . . . . . . . . . 65
RS Series . . . . . . . . . . . . . . . . . . . . . . . . 71
RS1224-100 . . . . . . . . . . . . . . . . . . . . . . 71
RS6MM-100 . . . . . . . . . . . . . . . . . . . . . . 71
RSD-116 . . . . . . . . . . . . . . . . . . . . . . . . . 59
RSP Series. . . . . . . . . . . . . . . . . . . . . . . 71
RSR-50. . . . . . . . . . . . . . . . . . . . . . . . . . 71
RSR-BIT . . . . . . . . . . . . . . . . . . . . . . . . . 71
RSV-50 . . . . . . . . . . . . . . . . . . . . . . . . . . 71
RSV-BIT . . . . . . . . . . . . . . . . . . . . . . . . . 71
SEFP Series. . . . . . . . . . . . . . . . . . . . . . 68
SEP Series. . . . . . . . . . . . . . . . . . . . . . . 69
SEPH-1 . . . . . . . . . . . . . . . . . . . . . . . . . 43
SEPH-2 . . . . . . . . . . . . . . . . . . . . . . . . . 43
SG6P-3. . . . . . . . . . . . . . . . . . . . . . . . . . 70
Shelves . . . . . . . . . . . . . . . . . . . . . . . 58-59
Sliding Latching Shelf. . . . . . . . . . . . . . . 59
Slim Rack . . . . . . . . . . . . . . . . . . . . . . . . 30
Slotted Panels . . . . . . . . . . . . . . . . . . . . 63
SLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SP Series . . . . . . . . . . . . . . . . . . . . . . . . 69
Specialty Tops . . . . . . . . . . . . . . . . . . . . 67
SSC Series (plexiglass) . . . . . . . . . . . . . 71
SSC Series (vented). . . . . . . . . . . . . . . . 71
Stackable Bars . . . . . . . . . . . . . . . . . . . . 62
Stackable Flat Wire. . . . . . . . . . . . . . . . . 62
Stand-Alone Racks. . . . . . . . . . . . . . . . . . 6
Stationary Bases . . . . . . . . . . . . . . . . . . 73
Steel Rods . . . . . . . . . . . . . . . . . . . . . . . 62
Storage. . . . . . . . . . . . . . . . . . . . . . . . . . 61
SVP Series . . . . . . . . . . . . . . . . . . . . . . . 69
SVPL Series . . . . . . . . . . . . . . . . . . . . . . 69
SVSP Series . . . . . . . . . . . . . . . . . . . 67, 69
SVSPH-1 . . . . . . . . . . . . . . . . . . . . . . . . 43
SVSPH-2 . . . . . . . . . . . . . . . . . . . . . . . . 43
T
Telescoping Panels . . . . . . . . . . . . . . . . 63
Thermal Management . . . . . . . . . . . . . . 64
Thumb-Turn Cam Latch . . . . . . . . . . . . . 72
TLK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
U
UDE Series . . . . . . . . . . . . . . . . . . . . . . 61
UDP Series . . . . . . . . . . . . . . . . . . . . . . 61
US Series . . . . . . . . . . . . . . . . . . . . . . . . 58
USE Series. . . . . . . . . . . . . . . . . . . . . . . 58
USV Series. . . . . . . . . . . . . . . . . . . . . . . 58
USVC Series . . . . . . . . . . . . . . . . . . . . . 58
Utility Light . . . . . . . . . . . . . . . . . . . . . . . 72
Utility Shelves. . . . . . . . . . . . . . . . . . . . . 58
Utility Shelves for Electronics . . . . . . . . . 58
UVSH-111 . . . . . . . . . . . . . . . . . . . . . . . . 43
UVSH-13 . . . . . . . . . . . . . . . . . . . . . . . . 43
UVSH-15 . . . . . . . . . . . . . . . . . . . . . . . . 43
V
Variable Depth Shelves . . . . . . . . . . . . . 58
Variable Width Shelves. . . . . . . . . . . . . . 58
VARI-RACK . . . . . . . . . . . . . . . . . . . . . . 32
VCW-12 . . . . . . . . . . . . . . . . . . . . . . . . . 63
VDS Series. . . . . . . . . . . . . . . . . . . . . . . 58
S
SBL Series . . . . . . . . . . . . . . . . . . . . . . . 61
Screws . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Security Covers . . . . . . . . . . . . . . . . . . . 71
76
Lowell Product Catalog | lowellmfg.com | 800.325.9660 | Fax 888.456.9355
Vented Top Panels . . . . . . . . . . . . . . . . . 67
Vented Utility Shelves. . . . . . . . . . . . . . . 58
Vertical Cable Management . . . . . . . . . . 63
VR Series . . . . . . . . . . . . . . . . . . . . . . . . 52
INDEX
VR-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
VR-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
VR-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
VWS Series . . . . . . . . . . . . . . . . . . . . . . 58
W
WS21-17. . . . . . . . . . . . . . . . . . . . . . . . . 54
WSL-1814. . . . . . . . . . . . . . . . . . . . . . . . 54
Z
Zero-Space Shelves . . . . . . . . . . . . . . . . 58
77
800.325.9660 | Fax 888.456.9355 | lowellmfg.com | Lowell Product Catalog
Manufacturer’s Statement: All product designs and specifications
are subject to change without notice. Lowell makes every effort to
avoid errors, however we reserve the right to correct typographical,
photographic, clerical and printing errors and to change
specifications to improve products and/or manufacturing methods.
All product finishes and colors shown herein are representative;
actual colors may vary.
C05155k
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement