TNC Male Right Angle Connector Clamp/Solder Attachment For

TNC Male Right Angle Connector Clamp/Solder Attachment

For RG58, RG55, RG141, RG142, RG223, RG400

TECHNICAL DATA SHEET PE4054

TNC Male Right Angle Connector Clamp/Solder Attachment For RG58, RG55, RG141, RG142, RG223,

RG400

Configuration

Connector

Connector Specification

Connector Interface Type

Cable Attachment Method (Shield/Contact)

Body Style

Electrical Specifications

Frequency Range, GHz

Impedance, Ohms

Maximum Operating Voltage, Volts

Dielectric Withstanding Voltage, Vrms

Frequency 1

Frequency, GHz

VSWR

Mechanical Specifications

Temperature

Operating Range, deg C

TNC Male

MIL-STD-348A

RG58,RG55,RG141,RG142,RG223,RG400

Clamp/Solder

Right Angle

DC to 11

50

500

1,500

DC to 4

1.5:1

-65 to +165

Size

Length, in [mm]

Width/Dia., in [mm]

Height, in [mm]

Weight, lbs [g]

1.6 [40.64]

0.59 [15]

1.145 [29.08]

0.096 [43.54]

Connector

Type

Contact Material and Plating

Contact Plating Specification

Body Material and Plating

Body Plating Specification

Dielectric Type

TNC Male

Brass, Gold

30µ in. minimum

Brass, Nickel

100µ in. minimum

Teflon

Compliance Certifications (visit www.Pasternack.com for current document)

RoHS Compliant Yes

Plotted and Other Data

Notes: Values at 25 °C, sea level

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications:

TNC Male Right Angle Connector Clamp/Solder Attachment For RG58, RG55, RG141,

RG142, RG223, RG400 PE4054

PE4054 REV

1

TNC Male Right Angle Connector Clamp/Solder Attachment

For RG58, RG55, RG141, RG142, RG223, RG400

TECHNICAL DATA SHEET PE4054

URL: http://www.pasternack.com/tnc-male-standard-rg58-rg55-rg141-rg142-rg223-rg400-connector-pe4054-p.aspx

TNC Male Right Angle Connector Clamp/Solder Attachment For RG58, RG55, RG141, RG142, RG223, RG400 from

Pasternack Enterprises has same day shipment for domestic and International orders. We maintain 99% availability of the industry’s broadest selection of RF, microwave and fiber optic products.

PE4054 REV

2

PE4054

CAD Drawing

TNC Male Right Angle Connector Clamp/Solder Attachment

For RG58, RG55, RG141, RG142, RG223, RG400

© 2012 Pasternack Enterprises All Rights Reserved PE4054 REV

3

BNC Male Connector Crimp/Crimp Attachment for RG58, PE-C195, LMR-195

RF Connectors Technical Data Sheet

.

Configuration

• BNC Male Connector

• MIL-STD-348A

• 50 Ohms

• Straight Body Geometry

• RG58, PE-C195, LMR-195 Interface Type

• Crimp/Crimp Attachment

PE4016

Electrical Specifications

Description

Frequency Range

Minimum

DC

Typical Maximum

4

Units

GHz

VSWR 1.5:1

Operating Voltage (AC) 500 Vrms

.

Mechanical Specifications

Size

Length

.

Width/Dia.

.

Weight

Material Specifications

Description

Contact

1.13 in [28.7 mm]

0.571 in [14.50 mm]

0.027 lbs [12.25 g]

Insulation

Body

Coupling Nut

Material

Brass

Plating

Gold

30µ in. minimum

Teflon

Brass Nickel

100µ in. minimum

Brass Nickel

100µ in. minimum

.

Environmental Specifications

Temperature

Operating Range -65 to 165 deg C

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications:

BNC Male Connector Crimp/Crimp Attachment for RG58, PE-C195, LMR-195 PE4016

PE4016 REV 1.2

1

BNC Male Connector Crimp/Crimp Attachment for RG58, PE-C195, LMR-195

RF Connectors Technical Data Sheet

Compliance Certifications

(visit www.Pasternack.com for current document)

RoHS Compliant

REACH Compliant 12/17/2015

Plotted and Other Data

Notes:

PE4016

BNC Male Connector Crimp/Crimp Attachment for RG58, PE-C195, LMR-195 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications:

BNC Male Connector Crimp/Crimp Attachment for RG58, PE-C195, LMR-195 PE4016

URL: https://www.pasternack.com/bnc-male-standard-rg58-pe-c195-lmr-195-connector-pe4016-p.aspx

PE4016 REV 1.2

2

PE4016

CAD Drawing

BNC Male Connector Crimp/Crimp Attachment for RG58, PE-C195, LMR-195

PE4016 REV 1.2

3

TIMES

MICROWAVE SYSTEMS

LMR

®

-195

Flexible Low Loss Communications Coax

Ideal for…

•

Jumper Assemblies in Wireless Communications Systems

•

Short Antenna Feeder runs

•

Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,

SCADA, Mobile Antennas) requiring an easily routed,

low loss RF cable

•

Drop-in replacement for RG-58 and RG-142

• LMR ® standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use. The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables.

• LMR ® - DB is identical to standard LMR plus has the advantage of being watertight. The addition of waterproofing compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future.

• LMR ® - FR is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums.

LMR-FR is UL/NEC & CSA rated‘CMR’ and ‘FT4’ respectively, meets FAA FAR25 requirements and is

MSHA-P for mining applications.

• LMR ® - FR-PVC is a general-purpose indoor cable and has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ respectively. It is less expensive than LMR-FR, however it emits toxic fumes (HCL) and greater smoke density when burned.

• LMR ® - PVC is designed for low loss general-purpose applications and is somewhat more flexible than the standard polyethylene jacketed LMR.

• LMR ® - PVC-W is a white-jacketed version of LMR-

PVC for marine and other applications where color compatibility is desired.

• LMR ® - MA is a flexible cable designed specifically for mobile antenna applications. It has a PVC jacket and un-bonded aluminum tape to facilitate end stripping with automated equipment.

• Flexibility and bendability are hallmarks of the LMR-

195 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance.

• Low Loss is another hallmark feature of LMR-195.

Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.

• RF Shielding is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).

• Weatherability: LMR-195 cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years.

• Connectors: A wide variety of connectors are available for LMR-195 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes.

• Cable Assemblies: All LMR-195 cable types are available as pre-terminated cable assemblies. Refer to the section on FlexTech for further details.

Part Number

Part Description

Application

Stock

Jacket Color Code

LMR-195

LMR-195-DB

Outdoor

Outdoor/Watertight

PE Black 54110

PE Black 54113

LMR-195-FR Indoor/Outdoor Riser CMR FRPE Black 54111

LMR-195-FR-W Indoor/Outdoor Riser CMR FRPE White 54158

LMR-195-FR-PVC Indoor/Outdoor Riser CMR FRPVC Black 54105

LMR-195-MA Mobile Antennas PVC Black 54210

LMR-195-PVC General Purpose

LMR-195-PVC-W General Purpose

PVC Black 54215

PVC White 54199

Construction Specifications

Description Material In. (mm)

Inner Conductor

Dielectric

Outer Conductor

Overall Braid

Jacket

Solid BC

Foam PE

Aluminum Tape

Tinned Copper

(see table above)

0.037 (0.94)

0.110 (2.79)

0.116 (2.95)

0.139 (3.53)

0.195 (4.95)

10

(800) TMS-COAX • www.timesmicrowave.com

Mechanical Specifications

Performance Property Units US (metric)

Bend Radius: installation

Bend Radius: repeated

Bending Moment

Weight

Tensile Strength

Flat Plate Crush in. (mm) in. (mm) ft-lb (N-m) lb/ft (kg/m) lb (kg) lb/in. (kg/mm)

0.5

2.0

(12.7)

(50.8)

0.2 (0.27)

0.021 (0.03)

40

15

(18.2)

(0.27)

Environmental Specifications

Performance Property

Installation Temperature Range

Storage Temperature Range

Operating Temperature Range

0 F o C

-40/+185 -40/+85

-94/+185 -70/+85

-40/+185 -40/+85

Attenuation vs. Frequency (typical)

TIMES

MICROWAVE SYSTEMS

Electrical Specifications

Performance Property Units US (metric)

Velocity of Propagation

Dielectric Constant

Time Delay

Impedance

Capacitance

Inductance

Shielding Effectiveness

DC Resistance

Inner Conductor

Outer Conductor

Voltage Withstand

Jacket Spark

Peak Power

%

NA nS/ft (nS/m) ohms pF/ft (pF/m) uH/ft (uH/m) dB

76

1.56

1.27

50

25.4 (83.3)

0.064 (0.21)

>90

(4.17) ohms/1000ft (/km) 7.6 (24.9) ohms/1000ft (/km) 4.9 (16.1)

Volts DC

Volts RMS kW

1000

3000

2.5

100.0

10.0

1.0

10

Frequency (MHz)

Attenuation dB/100 ft

Attenuation dB/100 m

Avg. Power kW

30

2.0

6.5

0.89

50

2.5

8.4

0.68

100

Frequency (MHz)

150

4.4

14.6

0.39

220

5.4

17.7

0.32

450

7.8

25.5

0.22

1,000 10,000

900 1500 1800 2000 2500 5800

11.1 14.5 16.0 16.9 19.0 29.9

36.5 47.7 52.5 55.4 62.4 98.1

0.16 0.12 0.11 0.10 0.09 0.06

Calculate Attenuation = (0.356859) • FMHz + (0.000470) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)

Attenuation: VSWR=1.0 ; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);

Sea Level; dry air; atmospheric pressure; no solar loading

Interface

N male

N male

SMA male

TNC male

TC-195-NM

Description

Part

Number

TC-195-SM

Connectors

TC-195-NM-RA-D

Stock

Code

Inner Outer Finish*

VSWR** Coupling Contact Contact Body

Freq. (GHz) Nut Attach Attach /Pin

TC-195-TM

Length Width Weight in (mm) in (mm) lb (g)

Straight Plug TC-195-NM 3190-1555 <1.25:1 (2.5) Knurl

Right Angle TC-195-NMH-RA-D 3190-2425 <1.35:1 (6) Hex/Knurl

Straight Plug

Straight Plug

TC-195-SM

TC-195-TM

3190-1553 <1.25:1 (2.5)

3190-1554 <1.25:1 (2.5)

Hex

Knurl

Solder

Solder

Solder

Solder

Crimp

Crimp

Crimp

Crimp

S/G

A/G

SS/G

S/G

* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair

Install Tools

Type

Tool

Part Number

Replacement RB-01

Blade

Cutting Tool CCT-01

Deburr Tool DBT-U

Stock Code

Crimp CT-240/200/195/100 3190-667

3190-1544

3192-001

3190-1609

Description

Crimp tool for LMR-100,195,

200 and 240 connectors

Cable end flush cut tool

Removes center conductor rough edges

Replacement blade for cutting tool

CT-240/200/195/100

DBT-U

1.5 (38.1) 0.75 (19.1) 0.073 (33.1)

1.3 (32.1) 1.19 (30.1) 0.083 (37.5)

1.0 (25.4) 0.32 (8.1) 0.015 (6.8)

1.4 (35.6) 0.59 (15.0) 0.045 (20.4)

CCT-01

(800) TMS-COAX • www.timesmicrowave.com

11