SREV Layout - Warehouse Sound Systems

SREV Layout - Warehouse Sound Systems
INARY
M
I
L
E
PR
New from
SREV1
Sampling Reverberator
SREV1 Sampling Reverberator
RC-SREV1 Remote
Controller (optional)
(The final production model may differ slightly from the model shown here)
Reverberation for the New Millennium
Unlike conventional digital reverberators, which synthesize reverberation using contrived
algorithms, the new SREV1 Sampling Reverberator from Yamaha employs digital convolution
processing to impose an acoustic “fingerprint” of a previously measured environment on to any
audio signal, faithfully recreating the original reverberation, with accurate reflection detail
identical to that produced had the sound been heard in that environment. The SREV1 is
perfect for recording studios, audio post, broadcast, concert halls, theaters, or anyone looking
for superb quality reverb that sounds just like the real thing, with the option to sample the
reverberation characteristics of any place for use back in the studio.
■ Surround Reverb
■ Editing
In addition to stereo reverb (2-channel mode), the SREV1 offers
four-channel processing for true surround reverb (4-channel
mode). Alternatively, the SREV1 can be configured as two fully
independent reverberators (2-channel x2 mode), each with its
own inputs, outputs, and program settings.
Basic editing consists of reverb time, initial delay, reverb balance,
and EQ. Advanced editing includes pre-convolution 4-band PEQ,
post-convolution 4-band PEQ, and independent impulse-response
data selection for each channel. Reverb balance and level parameters can be controlled via MIDI.
■ CNV3 Convolution Chip
■ PC Software
Thirty-two of Yamaha’s new CNV3 convolution chips provide
the necessary “horsepower” for real-time convolution of up to
5.46 seconds per channel (2-channel mode), 2.73 seconds per
channel (4-channel or 2-channel x2 mode).
Up to 4-channel simultaneous sampling allows users to create their
own surround programs by measuring the impulse response of an
acoustic space using the bundled PC software, which offers excellent signal-to-noise performance. There’s also software for basic
graphical data editing.
■ DB-SREV1 DSP Expansion Board
Featuring an additional 32 CNV3 convolution chips, the
optional DB-SREV1 DSP Expansion Board doubles the available reverb time to a maximum of 10.92 seconds per channel
(2-channel mode), 5.46 seconds per channel (4-channel or
2-channel x2 mode).
■ Flexible I/O
■ Programs from Around the World
Up to four SREV1s can be controlled using the optional RCSREV1 Remote Controller, which features a large 320 x 240 dot
graphical display, fluorescent backlight, adjustable brightness and
contrast, four motorized faders for parameter editing, and input and
output signal clip indicators. Power is supplied by the SREV1.
A bundled CD-ROM contains preset reverb programs of famous
venues from around the world, and a CD-ROM library is
planned for future release. Reverb data is stored internally or on
standard PC Cards or CD-ROMs. Programs can
be recalled via MIDI.
Four-channel AES/EBU I/O is built in and two mini YGDAI slots
offer various analog and digital I/O options (AES/EBU, ADAT,
TASCAM).
■ RC-SREV1 Remote Controller
SREV1 Rear Panel
DB-SREV1
* Each Mini-YGDAI card in the photo is an optional product.
■ RC-SREV1 Specifications
■ SREV1 Specifications
General
320 × 240 dot graphical LCD with
fluorescent backlight and
contrast and brightness controls
Display
Sampling rate
Internal
48 kHz
External
44.1/48 kHz
Internal processing
Controls
32 bit
Program Memories 2-channel mode
12 (P1–P12)
4-channel & 2-channel × 2 mode 6 (P1–P6)
Indicators
SIGNAL × 4 (–34 dB), CLIP × 4
INPUT
DSP Expansion Board
OUTPUT
SIGNAL × 4 (–34 dB), CLIP × 4
FS LOCK
48K, 44.1K
Others
POWER, PC Card, CD-ROM
Buttons
Control Surface
Data wheel
60 mm motorized fader × 4
Rear Panel
BRIGHT, CONT
Control Surface
BYPASS, PROGRAM, PARAMETER MAIN, PARAMETER FINE,
UTILITY, –1/DEC, +1/INC, CURSOR ( < / > / s / t ), ENTER
Rear Panel
POWER switch
Indicators
BYPASS, INPUT CLIP × 4,
OUTPUT CLIP × 4
Connector
REMOTE RS-422
9-pin Dsub (male)
PC Card slot
PCMCIA ATA Type II memory
cards (FAT16)
CD-ROM drive
ISO9660 Level 2 discs
Cooling fan
×2
Power requirements
12 V DC
Power requirements
U.S.A. & Canada 120 V AC, 60 Hz
Europe 230 V AC, 50 Hz
Power consumption
16 W
Dimensions (W × H × D)
206 × 273.8 × 61.5 mm
(8.1" × 10.8" × 2.4")
Weight
1.8 kg (4 lbs)
Free-air operating temperature
10˚ C to 35˚ C (50˚ F to 95˚ F)
Storage temperature
–20˚ C to 60˚ C (–4˚ F to 140˚ F)
Supplied accessories
20 meter remote cable
Power consumption
200 W *1
Dimensions (W × H × D)
480 × 141.7 × 451.8 mm
(18.9" × 5.6" × 17.8"), 3U
Weight
11.5 kg (25.3 lbs)
Free-air operating temperature
10˚ C to 35˚ C (50˚ F to 95˚ F)
Storage temperature
–20˚ C to 60˚ C (–4˚ F to 140˚ F)
Power cord length
2.5 m
Supplied accessories
Power cord, CD-ROM (reverb
programs, software),
Owner’s Manual
Options
RC-SREV1, DB-SREV1,
mini YGDAI (MY) I/O cards
Control I/O
Connection
SERIAL 1, 2
MIDI IN
MIDI OUT
WORD CLOCK IN
REMOTE
SLOT (× 2)
Format
—
MIDI
MIDI
—
—
mini YGDAI
Level
RS-422
—
—
TTL 75Ω
RS-422
—
Connector
8-pin mini DIN
5-pin DIN
5-pin DIN
BNC
9-pin D-sub (female)
—
■ DB-SREV1 Specifications
Dimensions (W × H × D)
195 × 15 × 330 mm (7.7" × 0.6" × 13.0")
Weight
0.5 kg (1.1 lbs)
Supplied accessories
Flat cable × 2
• ADAT is registered trademark of Alesis Corporation.
• TASCAM is registered trademark of TEAC Corporation.
Digital In
Connection
DIGITAL IN 1, 2
Format
AES/EBU
Data Length
24 bit
Level
Connector
RS-422 XLR-3-31 type *2
Digital Out
Connection
Format
Data Length Level
Connector
DIGITAL OUT
AES/EBU *3
24 bit
RS-422 XLR-3-32 type *4
1, 2
(professional use)
*1
*2
*3
*4
● The design & specifications presented in
this release are preliminary, and may be
changed without notice.
Draws an additional 32 watts if DB-SREV1 DSP Expansion Board installed.
XLR-3-31 type connectors are balanced pin 1-ground, pin 2-hot (+), and pin 3-cold (–).
Channel status: Type: 2 audio channels. Sampling rate: depends on internal configuration.
XLR-3-32 type connectors are balanced pin 1-ground, pin 2-hot (+), and pin 3-cold (–).
YAMAHA Web Site
http://www.yamaha.co.jp/english/
http://www.yamaha.co.jp/product/proaudio/homeenglish/
This document is printed on chlorine free (ECF) paper.
RPA00-5 00920 Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement