Electro-Voice ELX200 12P powered speaker User manual

Electro-Voice ELX200 12P powered speaker User manual

Below you will find brief information for powered speaker ELX200 12P. The ELX200 12P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (12-inch EVS-12M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Electro-Voice ELX200 12P user manual | Manualzz

Electro-Voice | ELX200-12P 12" 2-way powered speaker

ELX200-12P 12" 2-way powered speaker

▪ EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six

ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.

▪ QuickSmartDSP features best-in-class processing.

Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.

▪ High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.

▪ EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.

▪ Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX three-handle design for easy lifting.

ELX200-12P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated

QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV

(12-inch EVS-12M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live,

Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.

ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.

The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy

(BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered

ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.

2 | ELX200-12P 12" 2-way powered speaker

Technical specifications

Frequency response (-3 dB): 57 Hz – 16 kHz 1

Frequency range (-10 dB): 51 Hz – 20 kHz 1

Maximum SPL: 130 dB 2

Coverage (H x V): 90° x 60°

Power rating: 1200 W

LF transducer: EVS-12M 300 mm (12 in)

HF transducer: DH-1C 1-inch titanium compression driver

Crossover frequency: 1700 Hz

Connectors: (1) Stereo RCA Input, (2)

XLR/TRS combo jack, and (1)

XLR

Enclosure: Polypropylene

Grille: 18 AWG steel with powdercoat

Suspension: (3) M10 suspension points

Color: Black

Dimensions (H x W x D): 629 mm x 363 mm x 344 mm

(24.8 in x 14.3 in x 13.6 in)

Net weight: 15.6 kg (34.4 lb)

Shipping weight: 17.7 kg (39.1 lb)

Power consumption: 100 - 240 V~, 50 - 60 Hz, 1.8A

3

1 Full space measurement using music DSP preset.

2 Maximum SPL is measured at 1 m using broadband pink noise at maximum output.

3 Current rating is 1/8 power.

System overview

Full-Range loudspeaker amplifier panel:

1

PUSH FOR DSP

8

7

AUX IN

L

OUTPUT

R

ELX200

WARNING: TO REDUCE RISK OF SHOCK DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

AVIS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE NE

PAS OUVRIR

2

3

4

6 5

1. LCD – DSP control and monitoring interface.

2. MASTER VOL – Adjusts the sound level.

DSP – Scroll through the menu and select the available choices. Push the MASTER VOL knob to enter the DSP menu.

3. INPUT LEVEL – Level control for adjusting the individual inputs’ level. The 12 o’clock position is unity gain (no gain or attenuation), the range to the left of zero (0) is for adjusting line level sources, and the range to the right of zero (0) is for adjusting microphone levels. LINE and MIC input level control is available for both INPUT 1 and INPUT 2.

4. INPUT – Balanced input for the connection of signal sources like mixing consoles, instruments, or microphones. Connections can be established using

¼ inch TRS or XLR connectors.

5. POWER – AC switch for switching the power ON or

OFF. The LCD screen lights up when the power is turned ON, after approximately 3 seconds.

6. MAINS IN – AC connection is established via an IECconnector.

7. OUTPUT – XLR output sends the mix of both input signals to another loudspeaker or subwoofer. INPUT

LEVEL controls the signal level to OUTPUT. The

MASTER VOL or DSP control settings do not affect

OUTPUT.

8. AUX INPUT – Stereo unbalanced RCA inputs for connecting external audio media devices, such as

MP3 players. Both RCA inputs are summed and can be controlled with INPUT 1 level. The inputs can be used simultaneously with XLR/TRS INPUT 1.

For more information, see ELX200 Powered

Loudspeakers Installation manual (F.01U.326.891).

3 | ELX200-12P 12" 2-way powered speaker

Dimensions:

311 mm

[12.3 in]

155 mm

[6.1 in]

363 mm

[14.3 in]

629 mm

[24.8 in]

344 mm

[13.6 in]

256 mm

[10.1 in]

253 mm

[10.0 in]

Frequency response:

!

Caution!

This Electro-Voice loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified. This system should be suspended with certified rigging hardware by an authorized rigging professional and in complete compliance with local, state, and federal overhead suspension ordinances.

Ordering information

ELX200-12P-US 12" 2-Way powered speaker, US cord

Powered 12-inch 2-way loudspeaker US cord, black

Order number ELX200-12P-US

ELX200-12P-EU 12" 2-Way powered speaker, EU cord

Powered 12-inch 2-way loudspeaker EU cord, black

Order number ELX200-12P-EU

ELX200-12P-AP 12" 2-Way powered speaker, AP

Powered 12-inch 2-way loudspeaker Asia-Pacific regions, black

Order number ELX200-12P-AP

ELX200-12P-GL 12" 2-way powered speaker, Global, No

BT

Powered 12 inch 2-way loudspeaker, two cords, No

Bluetooth®, black

Order number ELX200-12P-GL

Accessories

EBK1-M10-3PACK Forged M10 3Pack Short Shank Eyebolt Kit

Forged M10 short shank eyebolt kit, 3-pack, silver

Order number EBK1-M10-3PACK

ELX200-12-CVR Padded cover for ELX200-12, 12P

Padded cover for ELX200-12/12P, black

Order number ELX200-12-CVR

ELX200-BRKT Wall mount bracket, ELX200 2-way models

Wall mount bracket for all ELX200 full-range models

Order number ELX200-BRKT

Represented by:

Germany:

Bosch Sicherheitssysteme GmbH

Robert-Bosch-Ring 5

85630 Grasbrunn

Germany www.electrovoice.com

Bosch Security Systems, Inc.

12000 Portland Avenue South

Burnsville MN 55337

USA

© Bosch Security Systems 2017 | Data subject to change without notice

Document Number F.01U.326.893 | Vs1 | 10. Aug 2017

advertisement

Key Features

  • High-efficiency Class-D power amplifier
  • QuickSmartDSP for easy setup and control
  • 12-inch woofer and 1-inch titanium compression driver
  • 3 M10 threaded mounting points
  • Integrated pole-mounts
  • ZLX three-handle design

Frequently Answers and Questions

What is QuickSmartDSP?
QuickSmartDSP is a built-in digital signal processor that offers features like presets, EQ, and limiter control for easy setup and optimization.
What kind of transducers are used in the ELX200-12P?
The ELX200-12P uses a 12-inch EVS-12M woofer and a DH-1C 1-inch titanium compression driver.
What are the mounting options for the ELX200-12P?
The ELX200-12P has three M10 threaded mounting points for eyebolts, integrated pole-mounts, and the proven ZLX three-handle design for easy lifting.

Related manuals

Download PDF

advertisement