Brodit 213471 car kit Installation instructions

19 April, 2012, www.brodit.com, © 2012 Brodit AB

Product 213471

213471 Mounting bracket

Center mount, Extra strength mounting platform

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.

EAN: 7320282134716

Item no 213471 fits:

Peugeot 508 11-12 (For all countries)

1 (2)

INSTALLATION INSTRUCTIONS

1.

2.

3.

4.

Please read all of the instructions and look at the pictures before attaching the ProClip.

1. Hook the two angled upper parts of the ProClip into the gap between the frame surrounding the air vent and the dashboard. Press downward on top of the upper parts so all of the angled edges go all the way into the gap.

2. Hook the angled edge on the lower part of the ProClip under the dashboard overhang. Hold the two upper parts in the gap and in the same time press forward on the face plate so the ProClip contracts and is firmly in place.

3. Tighten gently the large nuts on top of the ProClip so the ProClip contracts and is firmly in place. Use an Allen key to tighten the small nuts and lock the ProClip into the desired position.

4. The ProClip is in place.

2 (2)