Phihong POE61U-560D Datasheet

Add to my manuals
3 Pages

advertisement

Phihong POE61U-560D Datasheet | Manualzz

WWW.PHIHONG.COM

60W Passive Power over Ethernet Adapter

Lowest PoE

Features

 Continuous flow of power with no detection

 Very Low leakage

 Non-Vented Case

 2 or 3 Wire Options

 1 Year Warranty

Applications

 Satellite Receivers

 Wireless Network Access Points

 Kiosks

Safety Approvals

 cUL/UL

Mechanical Characteristics

 Length: 163mm (6.4in)

 Width: 65mm (2.56in)

Output Specifications

 Lowest Cost Ultra PoE

 Full Protection OCP, OVP

 Level V Efficiency

 Optional Gigabit Base-T Data Rate

 Security Camera

 LCD Displays

 WiMax Access Points

 CE

 Height: 36mm (1.42in)

 Weight: 0.4Kg

Model Number

POE61U - 560D

Output Voltage

56V

Output Current

1.1 A

Input Connector

3 Wire C14

Gigabit

No

POE61U - 560DG 56V 1.1A 3 Wire C14 Yes

POE61W -560D 56V 1.1A 2 Wire C8 No

POE61W- 560DG 56V 1.1A 2 Wire C8

Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information.

Yes

Revision 11/17/2011

POE61X Characteristics

INPUT:

AC Input Voltage Range

90 to 264VAC

AC Input Voltage Rating

100 to 240VAC, 47-63Hz

AC Input Current

2.0A (RMS) maximum for 90VAC

1.2A (RMS) maximum for 240VAC

Leakage Current

0.25mA maximum for 264VAC, 50Hz (U Models)

0.25mA maximum fro 264VAC, 50Hz (W models)

AC Inrush Current

30A maximum for 115VAC

60A maximum for 230VAC

(at cold start, 25°C)

OUTPUT:

Total Output Power

60W

Output Ripple

250mVp-p

DC Offset

No data degradation with DC imbalance 18mA

Efficiency

Meets Level V Requirements; 87% minimum

Hold-up Time

10mS min. 120VAC and maximum load

ENVIRONMENTAL:

Temperature

Operation

Non-operation

0 to +40°C

-20 to +65°C

Humidity

Operation 5 to 90%

WWW.PHIHONG.COM

EMC

FCC Part 15 Class A

EN55022 Class A

Isolation Test

Primary to Secondary: 4242VDC for 1 minute, 10mA

Primary to F.G.: 2121VDC for 1 minute, 10mA

Secondary to F.G.: 2121VDC for 1 minute, 10mA

Immunity

ESD:

RS:

EFT:

Surge:

EN61000-4-2. Level 3

EN61000-4-3. Level 2

EN61000-4-4. Level 2

EN61000-4-5. Level 3

CS: EN61000-4-6. Level 2

Voltage Dips EN61000-4-11

Insulation Resistance

Primary to Secondary: >10M OHM 500VDC

Primary to Field Ground: >10M OHM 500VDC

FEATURE:

Over Voltage/Current, Short Circuit

Protection

Outputs equipped with short circuit protection and overload protection.

The output can be shorted permanently without damage

Input Connector

IEC320 C14 for U Models

IEC320 C8 for W Models

Output Connection

4-pair powering for Gigabit models

Pins 3,6, 4,5(+) Pins 1,2, 7,8 (-)

2-pair powering for non-gigabit models

Pins 4,5(+) Pins 7,8 (-)

Warranty

1 Year

Dimension Diagram Unit:mm

POE61U Series with 3 Wire Input

WWW.PHIHONG.COM

POE61W Series with 2 Wire Input

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Download PDF

advertisement