Owner`s Manual

Owner`s Manual
To resize thickness, move all items on the front cover
and registration marks to left or right.
Information
AFRICA
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany
Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
REUNION
SOUTH AFRICA
That Other Music Shop(PTY)Ltd.
11 Melle St., Braamfontein,
Johannesbourg,
SOUTH AFRICA
TEL: (011) 403 4105
FAX: (011) 403 1234
Paul Bothner(PTY)Ltd.
17 Werdmuller Centre,
Main Road, Claremont 7708
SOUTH AFRICA
TEL: (021) 674 4030
PHILIPPINES
COSTA RICA
TRINIDAD
ITALY
ISRAEL
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
TEL: (02) 899 9801
JUAN Bansbach Instrumentos
Musicales
Ave.1. Calle 11, Apartado 10237,
San Jose, COSTA RICA
TEL: 258-0211
AMR Ltd
Ground Floor
Maritime Plaza
Barataria Trinidad W.I.
TEL: (868)638 6385
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
Halilit P. Greenspoon & Sons
Ltd.
8 Retzif Ha'aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
SINGAPORE
CURACAO
URUGUAY
Swee Lee Company
150 Sims Drive,
SINGAPORE 387381
TEL: 6846-3676
Zeelandia Music Center Inc.
Orionweg 30
Curacao, Netherland Antilles
TEL:(305)5926866
CRISTOFORI MUSIC PTE LTD
Blk 3014, Bedok Industrial Park E,
#02-2148, SINGAPORE 489980
TEL: 6243-9555
DOMINICAN REPUBLIC
Todo Musica S.A.
Francisco Acuna de Figueroa
1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
TAIWAN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung
Shan N.Road Sec.2, Taipei,
TAIWAN, R.O.C.
TEL: (02) 2561 3339
THAILAND
Theera Music Co. , Ltd.
330 Verng NakornKasem, Soi 2,
Bangkok 10100, THAILAND
TEL: (02) 2248821
VIETNAM
ASIA
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Saigon Music
Suite DP-8
40 Ba Huyen Thanh Quan Street
Hochiminh City, VIETNAM
TEL: (08) 930-1969
AUSTRALIA/
NEW ZEALAND
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 Anhuaxili
Chaoyang District, Beijing
100011 CHINA
TEL: (010) 6426-5050
AUSTRALIA/
NEW ZEALAND
Roland Corporation
Australia Pty.,Ltd.
Roland Shanghai Electronics
Co.,Ltd.
(GUANGZHOU OFFICE)
2/F., No.30 Si You Nan Er Jie
Yi Xiang, Wu Yang Xin Cheng,
Guangzhou 510600, CHINA
TEL: (020) 8736-0428
For Australia
Tel: (02) 9982 8266
For New Zealand
Tel: (09) 3098 715
HONG KONG
Tom Lee Music Co., Ltd.
Service Division
22-32 Pun Shan Street, Tsuen
Wan, New Territories,
HONG KONG
TEL: 2415 0911
Parsons Music Ltd.
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
INDIA
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra
Mahalaxmi Flats Compound
Off. Dr. Edwin Moses Road,
Mumbai-400011, INDIA
TEL: (022) 2493 9051
INDONESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
KOREA
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
MALAYSIA
BENTLEY MUSIC SDN BHD
140 & 142, Jalan Bukit Bintang
55100 Kuala
Lumpur,MALAYSIA
TEL: (03) 2144-3333
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
CENTRAL/LATIN
AMERICA
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
BARBADOS
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, Barbados
TEL: (246)430-1100
BRAZIL
Roland Brasil Ltda
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
COLOMBIA
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, Colombia
TEL: (574)3812529
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Santo Domingo,
Dominican Republic
TEL:(809) 683 0305
ECUADOR
Mas Musika
Rumichaca 822 y Zaruma
Guayaquil - Ecuador
TEL:(593-4)2302364
EL SALVADOR
OMNI MUSIC
75 Avenida Norte y Final
Alameda Juan Pablo II,
Edificio No.4010 San Salvador,
EL SALVADOR
TEL: 262-0788
GUATEMALA
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala
Guatemala
TEL:(502) 599-2888
HONDURAS
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
3 Ave.11 Calle S.O
San Pedro Sula, Honduras
TEL: (504) 553-2029
MARTINIQUE
Musique & Son
Z.I.Les Mangle
97232 Le Lamantin
Martinique F.W.I.
TEL: 596 596 426860
Gigamusic SARL
10 Rte De La Folie
97200 Fort De France
Martinique F.W.I.
TEL: 596 596 715222
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico
D.F. MEXICO
TEL: (55) 5668-6699
NICARAGUA
Bansbach Instrumentos
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, Nicaragua
TEL: (505)277-2557
PANAMA
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City, REP. DE
PANAMA
TEL: 315-0101
PARAGUAY
Distribuidora De
Instrumentos Musicales
J.E. Olear y ESQ. Manduvira
Asuncion PARAGUAY
TEL: (595) 21 492147
PERU
Audionet
Distribuciones Musicales SAC
Juan Fanning 530
Miraflores
Lima - Peru
TEL: (511) 4461388
VENEZUELA
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar
import
#7 zona Industrial de Turumo
Caracas, Venezuela
TEL: (212) 244-1122
EUROPE
AUSTRIA
NORWAY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: 2273 0074
POLAND
JORDAN
AMMAN Trading Agency
245 Prince Mohammad St.,
Amman 1118, JORDAN
TEL: (06) 464-1200
KUWAIT
MX MUSIC SP.Z.O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
EASA HUSAIN AL-YOUSIFI
& SONS CO.
Abdullah Salem Street,
Safat, KUWAIT
TEL: 243-6399
PORTUGAL
LEBANON
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: 22 608 00 60
Chahine S.A.L.
Gerge Zeidan St., Chahine
Bldg., Achrafieh, P.O.Box: 165857
Beirut, LEBANON
TEL: (01) 20-1441
ROMANIA
Roland Elektronische
Musikinstrumente HmbH.
Austrian Office
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni,
ROMANIA
TEL: (266) 364 609
QATAR
RUSSIA
SAUDI ARABIA
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
MuTek
3-Bogatyrskaya Str. 1.k.l
107 564 Moscow, RUSSIA
TEL: (095) 169 5043
aDawliah Universal
Electronics APL
Corniche Road, Aldossary
Bldg., 1st Floor, Alkhobar,
SAUDI ARABIA
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
TEL: (2) 666 10529
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: 3916 6200
FINLAND
Roland Scandinavia As, Filial
Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844
Norderstedt, GERMANY
TEL: (040) 52 60090
GREECE
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint,
HUNGARY
TEL: (23) 511011
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
Al Emadi Co. (Badie Studio &
Stores)
P.O. Box 62, Doha, QATAR
TEL: 4423-554
SPAIN
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: 93 308 10 00
Owner’s Manual
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
REUNION ISLAND
TEL: (0262) 218-429
When you need repair service, call your nearest Roland Service Center or authorized Roland
distributor in your country as shown below.
Owner’s Manual
We’d like to take a moment to thank you for purchasing the Roland Percussion Sound Module TD-20.
201b
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY
INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3), and “IMPORTANT NOTES”
(p. 5). These sections provide important information concerning the proper operation
of the unit. Additionally, in order to feel assured that you have gained a good grasp
of every feature provided by your new unit, Owner’s manual should be read in its
entirety. The manual should be saved and kept on hand as a convenient reference.
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
SYRIA
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
UKRAINE
TIC-TAC
Mira Str. 19/108
P.O. Box 180
295400 Munkachevo,
UKRAINE
TEL: (03131) 414-40
Technical Light & Sound
Center
Rawda, Abdul Qader Jazairi St.
Bldg. No. 21, P.O.BOX 13520,
Damascus, SYRIA
TEL: (011) 223-5384
TURKEY
Ant Muzik Aletleri Ithalat Ve
Ihracat Ltd Sti
Siraselviler Caddesi
Siraselviler Pasaji No:74/20
Taksim - Istanbul, TURKEY
TEL: (0212) 2449624
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai,
U.A.E.
TEL: (04) 3360715
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
NORTH AMERICA
CANADA
Roland Canada Music Ltd.
(Head Office)
5480 Parkwood Way
Richmond B. C., V6V 2M4
CANADA
TEL: (604) 270 6626
MIDDLE EAST
BAHRAIN
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
TEL: 211 005
CYPRUS
Radex Sound Equipment Ltd.
17, Diagorou Street, Nicosia,
CYPRUS
TEL: (022) 66-9426
IRAN
MOCO, INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
TEL: (021) 285-4169
Roland Canada Music Ltd.
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
TEL: (905) 362 9707
U. S. A.
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
TEL: (323) 890 3700
234
*
CompactFlash and
are trademarks of SanDisk Corporation and licensed by
CompactFlash association.
235
*
Roland Corporation is an authorized licensee of the CompactFlash™ and CF logo (
trademarks.
)
236
*
Fugue © 2004 Kyoto Software Research, Inc. All rights reserved.
237
As of August 20, 2004 (ROLAND)
*
V-LINK (
) is a trademark of Roland Corporation.
202
03453923
’04-10-4N
Copyright © 2004 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
To resize thickness, move all items on the front cover
and registration marks to left or right.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
For EU Countries
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
8.
9.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
For the U.K.
WARNING:
THIS APPARATUS MUST BE EARTHED
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Danger of explosion if battery is
incorrectly replaced.
Replace only with the same or
equivalent type recommended by the
manufacturer.
Discard used batteries according to the
manufacturer’s instructions.
Apparatus containing
Lithium batteries
ADVARSEL!
VARNING
Lithiumbatteri - Eksplosionsfare ved
fejlagtig håndtering.
Udskiftning må kun ske med batteri af
samme fabrikat og type.
Levér det brugte batteri tilbage til
leverandøren.
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en
ekvivalent typ som rekommenderas av
apparattillverkaren.
Kassera använt batteri enligt
fabrikantens instruktion.
ADVARSEL
VAROITUS
Eksplosjonsfare ved feilaktig skifte av
batteri.
Benytt samme batteritype eller en
tilsvarende type anbefalt av
apparatfabrikanten.
Brukte batterier kasseres i henhold til
fabrikantens instruks joner.
Paristo voi räjähtää, jos se on
virheellisesti asennettu.
Vaihda paristo ainoastaan
laitevalmistajan suosittelemaan
tyyppiin. Hävitä käytetty paristo
valmistajan ohjeiden mukaisesti.
For EU Countries
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
2
TD-20_Ref_e.book 3 ページ 2004年9月28日 火曜日 午前11時45分
USING THE UNIT SAFELY
The
symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers
other adverse effects
respect to the home
furnishings, as well
animals or pets.
001
•
The
symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
to damage or
caused with
and all its
to domestic
Before using this unit, make sure to read the
instructions below, and the Owner’s Manual.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
008a
•
................................................................................................
002b
•
Do not open or perform any internal modifications
on the unit. (The only exception would be where
this manual provides specific instructions which
should be followed in order to put in place userinstallable options; see p. 86, p. 88.)
................................................................................................
003
•
Do not attempt to repair the unit, or replace parts
within it (except when this manual provides
specific instructions directing you to do so). Refer
all servicing to your retailer, the nearest Roland
Service Center, or an authorized Roland
distributor, as listed on the “Information” page.
................................................................................................
004
•
................................................................................................
007
•
................................................................................................
008e
•
Make sure you always have the unit placed so it is
level and sure to remain stable. Never place it on
stands that could wobble, or on inclined surfaces.
Use only the attached power-supply cord. Also, the
supplied power cord must not be used with any
other device.
................................................................................................
009
•
Do not excessively twist or bend the power cord,
nor place heavy objects on it. Doing so can damage
the cord, producing severed elements and short
circuits. Damaged cords are fire and shock
hazards!
................................................................................................
010
•
Never use or store the unit in places that are:
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating
duct, on top of heat-generating equipment); or
are
• Damp (e.g., baths, washrooms, on wet floors); or
are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
The unit should be connected to a power supply
only of the type described in the operating instructions, or as marked on the bottom of unit.
This unit, either alone or in combination with an
amplifier and headphones or speakers, may be
capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long
period of time at a high volume level, or at a level
that is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should
immediately stop using the unit, and consult an
audiologist.
................................................................................................
011
•
Do not allow any objects (e.g., flammable material,
coins, pins); or liquids of any kind (water, soft
drinks, etc.) to penetrate the unit.
................................................................................................
................................................................................................
3
TD-20_Ref_e.book 4 ページ 2004年9月28日 火曜日 午前11時45分
012a:
•
Immediately turn the power off, remove the power
cord from the outlet, and request servicing by your
retailer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the
“Information” page when:
• The power-supply cord, or the plug has been
damaged; or
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or otherwise
has become wet); or
• The unit does not appear to operate normally or
exhibits a marked change in performance.
101a
•
................................................................................................
102b
•
In households with small children, an adult should
provide supervision until the child is capable of
following all the rules essential for the safe
operation of the unit.
................................................................................................
•
014
Protect the unit from strong impact.
(Do not drop it!)
................................................................................................
015
•
Do not force the unit’s power-supply cord to share
an outlet with an unreasonable number of other
devices. Be especially careful when using extension
cords—the total power used by all devices you
have connected to the extension cord’s outlet must
never exceed the power rating (watts/amperes) for
the extension cord. Excessive loads can cause the
insulation on the cord to heat up and eventually
melt through.
At regular intervals, you should unplug the power
plug and clean it by using a dry cloth to wipe all
dust and other accumulations away from its
prongs. Also, disconnect the power plug from the
power outlet whenever the unit is to remain
unused for an extended period of time. Any
accumulation of dust between the power plug and
the power outlet can result in poor insulation and
lead to fire.
................................................................................................
104
•
................................................................................................
•
Always grasp only the plug on the power-supply
cord when plugging into, or unplugging from, an
outlet or this unit.
103a:
................................................................................................
013
•
The unit should be located so that its location or
position does not interfere with its proper ventilation.
Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be
placed so they are out of the reach of children.
................................................................................................
106
•
Never climb on top of, nor place heavy objects on
the unit.
................................................................................................
107b
•
Never handle the power cord or its plugs with wet
hands when plugging into, or unplugging from, an
outlet or this unit.
................................................................................................
108a
•
Before moving the unit, disconnect the power plug
from the outlet, and pull out all cords from
external devices.
................................................................................................
................................................................................................
016
109a
•
Before using the unit in a foreign country, consult
with your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page.
................................................................................................
022a
•
Always turn the unit off and unplug the power
cord before attempting installation of the circuit
board (SOUND & SYSTEM EXPANSION BOARD
for TD-20).
•
................................................................................................
110a
•
•
Do not put anything that contains water (e.g.,
flower vases) on this unit. Also, avoid the use of
insecticides, perfumes, alcohol, nail polish, spray
cans, etc., near the unit. Swiftly wipe away any
liquid that spills on the unit using a dry, soft cloth.
................................................................................................
4
Whenever you suspect the possibility of lightning
in your area, pull the plug on the power cord out of
the outlet.
................................................................................................
115a
•
................................................................................................
026
Before cleaning the unit, turn off the power and
unplug the power cord from the outlet.
Install only the specified circuit board (SOUND &
SYSTEM EXPANSION BOARD for TD-20).
Remove only the specified screws (p. 86, p. 88).
................................................................................................
118
•
Should you remove screws from the bottom panel
of the unit (p. 17, p. 86, p. 88), make sure to put
them in a safe place out of children’s reach, so
there is no chance of them being swallowed accidentally.
................................................................................................
TD-20_Ref_e.book 5 ページ 2004年9月28日 火曜日 午前11時45分
IMPORTANT NOTES
291b
In addition to the items listed under “IMPORTANT
SAFETY INSTRUCTIONS” and “USING THE UNIT
SAFELY” on pages 2–4, please read and observe
the following:
Power Supply
301
• Do not use this unit on the same power circuit with any
device that will generate line noise (such as an electric
motor or variable lighting system).
307
• Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions
and/or damage to speakers or other devices.
308
• Although the LCD and LEDs are switched off when the
POWER switch is switched off, this does not mean that the
unit has been completely disconnected from the source of
power. If you need to turn off the power completely, first
turn off the POWER switch, then unplug the power cord
from the power outlet. For this reason, the outlet into
which you choose to connect the power cord’s plug should
be one that is within easy reach.
Placement
351
• Using the unit near power amplifiers (or other equipment
containing large power transformers) may induce hum. To
alleviate the problem, change the orientation of this unit; or
move it farther away from the source of interference.
352a
• This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
352b
• Noise may be produced if wireless communications
devices, such as cell phones, are operated in the vicinity of
this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience
such problems, you should relocate such wireless devices
so they are at a greater distance from this unit, or switch
them off.
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry cloth
or one that has been slightly dampened with water. To
remove stubborn dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure to wipe the
unit thoroughly with a soft, dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or deformation.
Repairs and Data
452
• Please be aware that all data contained in the unit’s
memory may be lost when the unit is sent for repairs.
Important data should always be backed up on a DATA
card, in another MIDI device (e.g., a sequencer), or written
down on paper (when possible). During repairs, due care is
taken to avoid the loss of data. However, in certain cases
(such as when circuitry related to memory itself is out of
order), we regret that it may not be possible to restore the
data, and Roland assumes no liability concerning such loss
of data.
Memory Backup
501b
• This unit contains a battery which powers the unit’s
memory circuits while the main power is off. When this
battery becomes weak, the message shown below will
appear in the display. Once you see this message, have the
battery replaced with a fresh one as soon as possible to
avoid the loss of all data in memory. To have the battery
replaced, consult with your retailer, the nearest Roland
Service Center, or an authorized Roland distributor, as
listed on the “Information” page.
“Backup Battery Low!”
354a
• Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Excessive heat can deform or discolor the unit.
355b
• When moved from one location to another where the
temperature and/or humidity is very different, water
droplets (condensation) may form inside the unit. Damage
or malfunction may result if you attempt to use the unit in
this condition. Therefore, before using the unit, you must
allow it to stand for several hours, until the condensation
has completely evaporated.
5
TD-20_Ref_e.book 6 ページ 2004年9月28日 火曜日 午前11時45分
IMPORTANT NOTES
Additional Precautions
551
• Please be aware that the contents of memory can be
irretrievably lost as a result of a malfunction, or the
improper operation of the unit. To protect yourself against
the risk of loosing important data, we recommend that you
periodically save a backup copy of important data you
have stored in the unit’s memory on a DATA card or in
another MIDI device (e.g., a sequencer).
Before Using Cards
Using DATA Cards
704
• Carefully insert the DATA card all the way in—until it is
firmly in place.
fig.CFslot
552
• Unfortunately, it may be impossible to restore the contents
of data that was stored on a DATA card or in another MIDI
device (e.g., a sequencer) once it has been lost. Roland
Corporation assumes no liability concerning such loss of
data.
CompactFlash™
553
• Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
554
• Never strike or apply strong pressure to the display.
556
705
• Never touch the terminals of the DATA card. Also, avoid
getting the terminals dirty.
• When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you will
avoid causing shorts, or damage to the cable’s internal
elements.
707
557
• CompactFlash cards are constructed using precision
components; handle the cards carefully, paying particular
note to the following.
• To prevent damage to the cards from static electricity,
be sure to discharge any static electricity from your
own body before handling the cards.
• Do not touch or allow metal to come into contact with
the contact portion of the cards.
• Do not bend, drop, or subject cards to strong shock or
vibration.
• Do not keep cards in direct sunlight, in closed vehicles,
or other such locations (storage temperature: -25 to 85°
C).
• Do not allow cards to become wet.
• Do not disassemble or modify the cards.
• A small amount of heat will radiate from the unit during
normal operation.
558a
• To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).
558c
• Since sound vibrations can be transmitted through floors
and walls to a greater degree than expected, take care not
to allow such sound to become a nuisance to neighbors,
especially at night and when using headphones. Although
the drum pads and pedals are designed so there is a
minimal amount of extraneous sound produced when
they’re struck, rubber heads tend to produce louder
sounds compared to mesh heads. You can effectively
reduce much of the unwanted sound from the pads by
switching to mesh heads.
• This unit’s memory card slot accepts CompactFlash
memory cards. Microdrive storage media by IBM are not
compatible.
708
559a
• When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
562
• Use a cable from Roland to make the connection. If using
some other make of connection cable, please note the
following precautions.
• Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this
unit. The use of such cables can cause the sound level to
be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
6
985
* The explanations in this manual include illustrations that
depict what should typically be shown by the display. Note,
however, that your unit may incorporate a newer, enhanced
version of the system (e.g., includes newer sounds), so what
you actually see in the display may not always match what
appears in the manual.
TD-20_Ref_e.book 7 ページ 2004年9月28日 火曜日 午前11時45分
Contents
USING THE UNIT SAFELY ........................................................................3
IMPORTANT NOTES..................................................................................5
Features ...................................................................................................11
Panel Descriptions ..................................................................................13
Top Panel............................................................................................................................. 13
Rear Panel ........................................................................................................................... 15
Front Panel .......................................................................................................................... 16
Setting Up the Kit ....................................................................................17
Mounting the TD-20 on the Stand ................................................................................... 17
Connecting the Pads and Pedals...................................................................................... 18
Connecting Headphones, Audio Equipment, Amps, or Other Gear ......................... 19
Turning On/Off the Power .............................................................................................. 20
Connecting the Hi-Hat (VH-12) and Setting the “VH Offset” .................................... 21
Connecting the Hi-Hat........................................................................................... 21
Adjusting the Offset ............................................................................................... 21
Adjusting Mesh Head Tension (PD-125/105) ............................................................... 21
Listening to the Demo Song...................................................................22
Button Operation and Displays..............................................................23
Saving Your Settings.......................................................................................................... 23
Buttons, Sliders, Dial and Knobs ..................................................................................... 23
Cursor .................................................................................................................................. 23
Function Buttons ([F1]–[F5])............................................................................................. 23
Changing Data Values....................................................................................................... 23
Group Faders ...................................................................................................................... 24
Choosing Pads from the TD-20’s Top Panel .................................................................. 24
How to Play Patterns......................................................................................................... 25
How to Turn the Metronome (Click) On/Off................................................................ 25
How to Adjust the Tempo ................................................................................................ 25
Adjusting the Display Contrast ....................................................................................... 25
About the Display in the Upper Right of the Screen .................................................... 25
About the Preset Drum Kits ............................................................................................. 25
Playing Methods ......................................................................................26
Pad (PD-125/105)............................................................................................................... 26
Change the Nuance of the Rim Shot.................................................................... 26
Hi-Hat (VH-12)................................................................................................................... 26
Cymbal (CY-15R/14C) ...................................................................................................... 27
Choke Play............................................................................................................... 27
Positional Sensing................................................................................................... 27
Chapter 1. Drum Kit Settings [KIT] ........................................................28
Choosing a Drum Kit......................................................................................................... 28
About the “DRUM KIT” Screen ........................................................................... 28
Selecting a Drum Kit from the List [F1 (LIST)] .............................................................. 28
Kit Parameters [F2 (FUNC)] ............................................................................................. 29
7
TD-20_Ref_e.book 8 ページ 2004年9月28日 火曜日 午前11時45分
Contents
Adjusting the Volume [F1 (VOLUME)]............................................................... 29
Assigning a Tempo for Each Kit [F2 (TEMPO)] ................................................. 29
Playing Brushes [F3 (BRUSH)] ............................................................................. 29
Output Level Monitor [F5 (MONITOR)]............................................................. 29
Naming a Drum Kit [F3 (NAME)]................................................................................... 30
Playing Cross Stick [F5 (XSTICK)]................................................................................... 30
Chapter 2. Drum Instrument Settings [INST] ........................................31
Choosing a Pad to Edit...................................................................................................... 31
Choose by Hitting a Pad........................................................................................ 31
Choose with the Trigger Select Buttons .............................................................. 31
Lock the Pad You are Editing (EDIT LOCK) ...................................................... 31
Assign an Instrument to a Pad......................................................................................... 31
Selecting an Instrument from the List [F1 (LIST)]......................................................... 32
Editing Drum Sounds [F2 (EDIT)]................................................................................... 32
Editing an Acoustic Drum Kit (V-EDIT) ............................................................. 32
Editing Other Instruments .................................................................................... 32
Editing Procedure................................................................................................... 32
Using Pads/Pedal as Controllers [F3 (CONTROL)]..................................................... 35
Playing a Pattern by Hitting a Pad (Pad Pattern) [F1 (PATTERN)] ................ 35
Changing the Pitch with the Hi-Hat Pedal [F2 (PDLBEND)] .......................... 35
MIDI Settings for Each Pad [F3 (MIDI)] .............................................................. 36
MIDI Note Numbers transmitted by Hi-Hat [F4 (HH MIDI)] ......................... 36
MIDI Note Number transmitted by Brush Sweep/Cross Stick
[F5 (BR MIDI)] ......................................................................................................... 36
Chapter 3. Mixer Settings .......................................................................37
Mixer Parameters [MIXER] .............................................................................................. 37
Using Group Faders to Edit (MIX EDIT)............................................................. 37
Chapter 4. Effect Settings.......................................................................38
Effects On and Off Switches [EFFECTS SWITCH]........................................................ 38
Using the Compressor and EQ [COMP/EQ]................................................................. 38
Compressor (COMP).............................................................................................. 39
Equalizer (EQ) ......................................................................................................... 39
Ambience [AMBIENCE] ................................................................................................... 40
Multi-Effects [MULTI EFFECTS] ..................................................................................... 40
Multi-Effects Parameters ....................................................................................... 41
Master Effects [MASTER COMP/EQ] ............................................................................ 43
Chapter 5. Trigger Settings [TRIGGER].................................................44
Selecting the Pad Type [F1 (BANK)]............................................................................... 44
Trigger Inputs and Pad/Playing Methods corresponding chart..................... 44
Setting the Pad Sensitivity [F2 (BASIC)]......................................................................... 45
Pad Sensitivity......................................................................................................... 45
Minimum level for the pad (Threshold).............................................................. 45
How Playing Dynamics Changes the Volume (Velocity Curve)..................... 45
Hi-Hat Settings [F3 (HI-HAT)]......................................................................................... 46
Adjusting the Offset of VH-12 Automatically.................................................... 47
Eliminate Crosstalk Between Pads [F4 (XTALK)] ......................................................... 47
Advanced Trigger Parameters [F5 (ADVANCE)]......................................................... 48
Trigger Signal Detection Time (Scan Time) ........................................................ 48
Detecting Trigger Signal Attenuation (Retrigger Cancel) ................................ 48
8
TD-20_Ref_e.book 9 ページ 2004年9月28日 火曜日 午前11時45分
Contents
Double Triggering Prevention (Mask Time)....................................................... 49
Rim/Edge Dynamic Response (Rim Gain)......................................................... 49
Rim Shots Response (Rim Shot Adjust)............................................................... 49
Cross Stick Threshold (XStick Thrshld)............................................................... 49
Playing Bow, Bell, and Edge (3-Way Triggering) .............................................. 50
Naming a Trigger Bank [F5 (Name)] ................................................................... 50
Chapter 6. Sequencer (Playback)...........................................................51
Basic Operation .................................................................................................................. 51
Choosing a Pattern [PATTERN] ...................................................................................... 52
About the “PATTERN” screen. ............................................................................ 52
Select a Pattern from the List [F1 (LIST)]........................................................................ 52
Playing Back a Pattern [PLAY] ........................................................................................ 52
Tempo Adjustment ............................................................................................................ 53
Setting the Tempo by Hitting a Pad (Tap Tempo)............................................. 53
Synchronizing with an External MIDI Device ................................................... 53
Part Settings [F2 (PART)] .................................................................................................. 54
Muting a Specific Part [F1 (MUTE)]..................................................................... 54
Make Settings for the Backing Part [F2 (BACKING)]........................................ 54
Master Tuning ......................................................................................................... 55
Percussion Part Settings [F3 (PERC)]................................................................... 55
Percussion Set Settings........................................................................................... 55
Volume/Pan Settings for Each Part [F4 (MIXER)] ............................................ 57
Effect Settings for Backing Parts [F5 (REV/CHO)] ........................................... 57
Pattern Settings [F3 (FUNC)]............................................................................................ 58
Time Signature/Number of Measures/Tempo Settings [F1 (SETUP)] .......... 58
Choosing a Playback Method [F2 (TYPE)].......................................................... 58
Naming a Pattern [F5 (NAME)]............................................................................ 59
Starting and Stopping the Metronome (Click) On/Off................................................ 59
Using a Indicator as a Click .............................................................................................. 59
Setting the Click ................................................................................................................. 60
Chapter 7. Sequencer (Recording/Editing) ...........................................61
Recording a Pattern [REC]................................................................................................ 61
How to Record ........................................................................................................ 61
Checking the Tones and Phrases During Recording (Rehearsal).................... 63
Editing a Pattern [F4 (EDIT)]............................................................................................ 64
Copying a Pattern [F1 (COPY)] ............................................................................ 64
Connecting Two Patterns [F2 (APPEND)] .......................................................... 65
Erasing a pattern [F3 (ERASE)]............................................................................. 65
Deleting a Pattern [F4 (DELETE)] ........................................................................ 66
Saving Patterns to a Memory Card [F5 (CARD)]............................................... 67
Chapter 8. Copy Function [COPY] .........................................................69
Chapter 9. Using a CompactFlash Memory Card [CARD] ...................70
Saving Data to a Memory Card [F1 (SAVE)] ................................................................. 70
Naming a Backup [F4 (NAME)] ........................................................................... 71
Loading Data from a Memory Card [F2 (LOAD)] ........................................................ 71
Deleting Data from a Memory Card [F3 (DELETE)] .................................................... 72
Formatting a Memory Card [F4 (FORMAT)]................................................................. 72
Checking the State of a Memory Card [F5 (INFO)] ...................................................... 73
9
TD-20_Ref_e.book 10 ページ 2004年9月28日 火曜日 午前11時45分
Contents
Chapter 10. Settings for the Entire TD-20 [SETUP] ..............................74
MIDI Settings and Operations [F1 (MIDI)] .................................................................... 74
Setting the MIDI Channels for Each Part [F1 (MIDI CH)]................................ 74
MIDI Settings for the Entire TD-20 [F2 (GLOBAL)] .......................................... 74
MIDI Messages for Detailed Performance Expressions [F3 (CTRL)].............. 76
Switching Drum Kits via MIDI (Program Change) [F4 (PROG)] .................... 76
Saving Data to an external MIDI Device (Bulk Dump) [F5 (BULK)] .............. 77
Selecting Output Destinations [F2 (OUTPUT)] ............................................................. 78
Output Destination for the Drum Instruments .................................................. 78
Output Destination for the Sequencer Parts/Metronome Click/
Sound Input from MIX IN [F4 (OTHER)] ........................................................... 78
Setting the Switches [F3 (CONTROL)] ........................................................................... 79
Using Foot Switches [F1 (FOOT SW)].................................................................. 79
Using Pads as Switches [F2 (PAD SW)] .............................................................. 80
Other Settings [F4 (OPTION)].......................................................................................... 80
Preview Button Settings [F1 (PREVIEW)]........................................................... 80
Master Effect Mode [F2 (COMP/EQ)]................................................................. 80
Adjusting the Display Contrast [F5 (LCD)] ........................................................ 81
Restoring the Factory Settings [F5 (F RESET)]............................................................... 81
Chapter 11. Drum Kit Chain [CHAIN] .....................................................82
Creating a Drum Kit Chain .............................................................................................. 82
Naming a Drum Kit Chain [F5 (NAME)]............................................................ 83
Playing with a Drum Kit Chain ....................................................................................... 83
Chapter 12. Other Functions [TOOLS] ..................................................84
Output Level Monitor [F1 (MONITOR)]........................................................................ 84
Checking the Current Status [F2 (INFO)]....................................................................... 84
Synchronizing Images to a TD-20 Performance [F5 (V-LINK)] .................................. 84
What is V-LINK?..................................................................................................... 84
Connection Examples............................................................................................. 84
Using V-LINK ......................................................................................................... 85
About Expansion Board..........................................................................86
Cautions When Installing a Expansion Board ............................................................... 86
How to Install a Expansion Board................................................................................... 86
À propos des carte d’extension .............................................................88
Précautions à prendre lors de l’installation d’une carte d’extension ......................... 88
Installation d’une carte d’extension ................................................................................ 88
Messages and Error Messages ..............................................................90
Drum Instrument List ..............................................................................92
Note Number (Factory Settings) ............................................................96
Backing Instrument List..........................................................................98
MIDI Implementation Chart ...................................................................100
Specifications ........................................................................................102
Block Diagram .......................................................................................104
Index .......................................................................................................106
Preset Drum Kit List ..............................................................................110
Preset Pattern List.................................................................................110
10
TD-20_Ref_e.book 11 ページ 2004年9月28日 火曜日 午前11時45分
Everything Is New! Module—
Stand—V-Hi-Hat—Pads
The TD-20 follows in the foot steps of the industry standard
TD-10, taking advantage of even more powerful COSM
technology. Velocity, position, and interval of each hit are
detected precisely, providing real and natural dynamics. The
new, dual trigger PD-125/105 pads give you superior feel,
response and control of the sound. You can play both shallow
and deep rim shots. 15 trigger inputs let you use lots of pads,
leaving room for advanced Pad Switch applications. (p. 80)
* COSM (Composite Object Sound Modeling) is a Roland
technology combining multiple sound modeling processes to
create new sounds hots.
* Positional detection is possible on snare drums (head/rim),
toms (rim) and ride cymbals (bow).
560 New Drum Sounds
Expanded V-Editing
The onboard sound library was created for the TD-20, and
designed to work with enhanced V-Editing. Besides being able
to change heads, muffling types, shell depth, etc. you can also
place one of two sizzle types on any cymbal, put a tambourine
on the hi-hat, add snare buzz to the toms or kick, change the
beater type and move the microphone position on all sounds
(p. 32).
An Easy User Interface
The interface is very easy to navigate. With the many buttons
on the top panel, you won’t lose time searching for functions.
Clear graphics, icons and menus guide you through the
simple and complex operations. No matter where you are
inside the TD-20, pushing the KIT button always brings you
back to the main kit page. Even still, please read this manual.
High-speed triggering
Advances in trigger technology combined with new pad
designs and V-Hi-Hat pads, provide natural response and
feel. Even playing with brushes (plastic only) has improved.
Compact Flash Offers Perfect
Data Organization
You can back up all of your kits into 8 different, nameable files
on the CF card. Each one stores 50 kits, all patterns, percussion
sets and global parameters (p. 70). You can copy FROM the
card, the individual kits, instruments within a kit and
percussion sets (p. 69). You can also save/load up to 100
individual patterns (p. 67).
Audio Signal Routing Stage
or Studio
Flexibility of audio routing is important in the professional
environment. The TD-20 lets you use all of the outputs in a
very efficient way. Each sound of the drum kit can be assigned
to one of the 10 individual outs. (Master out can be used as an
individual pair. The Effects, Ambience, Backing parts, Click
and even audio coming in the MIX input, can be assigned to
individual outputs. Perfect for any situation.
Unique V-Hi-Hat VH-12
The VH-12 V-Hi-Hat, which mounts on just about any hi-hat
stand on the market, lets you control the technology with the
same movements and feel of an acoustic hi-hat. You can do
foot splashes, “swish” sounds and even closing it tighter will
create changes in the nuance and pitch of the sound (p. 26).
Cables Are Easy To Organize
The MDS-20 stand allows you to pass the cables through the
pipes, making easy to transport and set up again. It
streamlines the look as well.
11
An Overview of the TD-20
Features
TD-20_Ref_e.book 12 ページ 2004年9月28日 火曜日 午前11時45分
Features
Top Quality Signal
Processing
Each instrument assigned to trigger 1–15 head and rim inputs
has an individual three-band equalizer and compressor(p. 38).
There is also a multi-effects unit with reverbs, delays, flanger,
chorus, pitch shifter, phaser, ring modulator, overdrive, etc.
(p. 40) There’s also Ambience, with a new room “shape”
feature in addition to being able to change wall materials, size,
etc. (p. 40) A master Compressor/EQ lets you apply it to
individual kits or for all of the kits (p. 43). All effects are
simple to understand and use. Via the top panel, you can also
turn all the effects on or off individually.
Functions For Stage
The group faders on the top panel let you make quick changes
as needed during performance (p. 24). You can play drum kits
in any desired order (Drum Kit Chain, p. 82). The +/- buttons
are large enough to be pressed with a drum stick. (Don’t HIT
them!) Another very useful function allows you to send the
click sound ONLY to the headphones if desired (p. 78). An
audio input (stereo) for custom monitoring (MIX IN jack, p.
19) is also provided. The MIX EDIT function allows immediate
editing of volume, Ambience send level, and MFX send level
using the group faders (p. 37).
Sequencer
Recording and playing back patterns is very easy. The 6 part
backing section, (including drums) can be used for live or
recording performances. Recording directly from the pads to
the percussion part is a great new feature, too (p. 75).
12
Advanced Tempo Functions
Each KIT can have it’s own tempo setting. The visual indicator
helps you count off the tempo of a song without needing to
hear the click (p. 59). Tap Tempo function allows you to set
tempo from all trigger inputs or the preview button (Tap
tempo, p. 53).
Expansion Board
The TD-20’s bottom panel provides the access for the future
Expansion Board, which will not only add new sounds, but
provides a system upgrade using Flash ROM (p. 86, p. 88).
MIDI Sound Module
Potentials
Percussion sets are accessed on a different MIDI channel than
the drums. They can be played from the internal sequencer or
external MIDI source (SPD type pad etc.) and feature a 128
note map. And with 262 backing instruments available, there
are sounds for all types of music (p. 98).
V-LINK function
V-LINK (
) is a function that allows music
and images to be performed together. By using MIDI to
connect two or more V-LINK compatible devices, you can
easily enjoy performing a wide range of visual effects that are
linked to the expressive elements of a music performance. By
using the TD-20 and Edirol DV-7PR together, connected pads
can be used to switch the Edirol DV-7PR’s images (clips/
palettes) (p. 84).
TD-20_Ref_e.book 13 ページ 2004年9月28日 火曜日 午前11時45分
An Overview of the TD-20
Panel Descriptions
Top Panel
fig.top
1
3
2
17
18
19
20
4
5
6
12
7
8
9
10
21
11
14
22
23
15
13
1. Trigger Level Indicator
This lights up and moves each time a trigger signal is
received from a pad. It monitors the pad connection and
is helpful when customizing trigger parameters.
2. LED Display
Displays the Kit number (currently selected drum kit).
3. Graphic Display
During normal performance, you see the kit name and
other information. When editing, relative graphics and
text will appear depending on the edit mode you are in.
16
24
4. CHAIN Button
A Chain allows you to set up a customized order for
playing your kits. There are 16 Chains (32 steps each).
Chains can be named also (p. 82).
5. TOOLS Button
Provides access to the Level Monitor, Memory status, and
V-LINK on/off (p. 84).
6. COPY Button
Copy or exchange data between drum kits, instruments,
etc. (p. 69)
* In this owner’s manual, this will be referred to as “the display.”
13
TD-20_Ref_e.book 14 ページ 2004年9月28日 火曜日 午前11時45分
Panel Descriptions
7. CARD Button
For access to (Compact Flash) memory card functions
such as saving/loading data etc. (p. 70)
8. SETUP Button
For access to functions that affect the TD-20 globally,
such as MIDI parameters etc. (p. 74)
9. TRIGGER Button
For access to trigger parameters (p. 44).
10. EXIT Button
Press this to return to the previous screen. Repeated
pressing takes you back to the “DRUM KIT” screen.
11. F1–F5 Buttons
These buttons change their function depending on the
contents of the display. The lower part of the display will
indicate the function of each button (p. 23).
12. SHIFT Button
Used in combination with other buttons. How this
functions is explained in respective parts of this manual.
13. GROUP FADERS
The faders are switchable, allowing you to adjust the
volume of the kick, snare, toms, hi-hat, cymbals,
percussion and backing instruments, and the click sound
(p. 24).
14. SEQUENCER
These provide access to and control of sequencer
functions (pattern playback/recording, Percussion set)
etc. (p. 51, p. 61)
15. DRUM KIT
These buttons take you to the screens for creating or
editing a drum kit. (p. 31, p. 37, p. 38).
16. KIT Button
One touch brings you back to the basic display screen. It
works from any Edit mode as well.
17. MIX IN Knob
Adjusts the level of the audio source connected to the
MIX IN jack. This sound is output from the MASTER
OUT jacks and/or the PHONES jack. Other possibilities
(p. 78).
14
18. PHONES Knob
Adjusts the headphone volume. Plugging in headphones
does not affect the master output (like other audio
device.)
19. MASTER Knob
Adjusts the volume of the MASTER OUT jacks.
20. CURSOR Buttons
Used to move the cursor in the display (p. 23).
21. VALUE Dial
This dial functions like the + and - buttons. Use it to scroll
quickly or make large changes in edited values (p. 23).
22. TRIG SELECT
Use the lower two buttons to select the trigger number
(pad) you want to access. Press the RIM button to select
the rim of a pad. (RIM button lights.) The PREVIEW
button lets you audition the instrument assigned here, or
you can hit a pad as well to select (p. 24).
23. PREVIEW Button
This velocity sensitive button allows you to audition an
instrument after you have chosen it with the TRIG
SELECT buttons or after you have played a pad/pedal
(p. 24).
24. + Button, - Button
These buttons are used to switch drum kits or to change
values when editing. The + button increases the value,
and the - button decreases it (p. 23). You can also use the
tip of your drum stick to press them. Never hit them with
a stick as this can cause malfunctions.
TD-20_Ref_e.book 15 ページ 2004年9月28日 火曜日 午前11時45分
Panel Descriptions
An Overview of the TD-20
Rear Panel
fig.rear_50
1
2
3
4
5
1. POWER Switch
This switch turns the power on/off.
2. AC Inlet
Connect the included AC power cable to this inlet.
* For details on the power consumption, refer to p. 103.
The unit should be connected to a power source
only of the type marked on the bottom of the
unit.
3. TRIGGER INPUT Jacks
Here is where you plug in pads, kick triggers, or acoustic
triggers. With dual trigger pads (PD-125/120/105/80R/
9/8/7), use a stereo (TRS) cable (p. 18).
4. MIDI IN Connector
To connect an external MIDI source (sequencer, pad
controller, keyboard, computer, etc.) to play the TD-20’s
sounds, or to load data (pp. 74–77).
5. MIDI OUT/THRU Connector
For using the TD-20/pads to play sounds in an external
MIDI sound module, or recording/saving data to an
external MIDI sequencer (pp. 74–77).
6
7
8
10 9
11
7. FOOT SWITCH Jack
Optional foot switches (such as BOSS FS-5U) give you
access to a variety of functions like selecting drum kits,
sequencer start/stop, etc. Using an optional PCS-31 cable
(standard insert cable), two foot switches can be utilized
at the same time (p. 79).
8. DIRECT OUT Jacks
Individual outputs have a variety of uses. The TD-20
offers many options. See the SETUP screen (p. 78).
9. MASTER OUT Jacks
For connecting to your amp/audio system. For monaural
output, use the MASTER OUT L (MONO) jack.
10. DIGITAL OUT Connector
This coaxial-type digital out connector sends the same
audio signal as is output from MASTER OUT jacks.
11. Security Slot (
)
For retail store use.
http://www.kensington.com/
6. MIX IN Jack
Used for connecting any external audio source (p. 19).
This audio signal will be output from the MASTER OUT
jacks and/or PHONES jack. Other signal routing
possibilities (p. 78).
15
TD-20_Ref_e.book 16 ページ 2004年9月28日 火曜日 午前11時45分
Panel Descriptions
Front Panel
fig.front
1
1. PHONES Jack
A pair of stereo headphones can be connected to this jack.
Connecting the headphones will not mute the output
from the MASTER OUT jacks (p. 19).
2. CompactFlash Card Slot
Accepts a CompactFlash memory card (optional). Each
memory card can store all settings of the TD-20, such as
drum kits and sequencer performance data, etc. (p. 70)
* The CompactFlash is the only memory card can be used by the
TD-20.
16
2
TD-20_Ref_e.book 17 ページ 2004年9月28日 火曜日 午前11時45分
An Overview of the TD-20
Setting Up the Kit
Mounting the TD-20 on the Stand
1. Attach the stand holder (included with the optional drum stand) to the TD-20.
Using the screws attached to the bottom panel, attach the holder so the unit is oriented as shown in the diagram.
* ONLY use the 8 mm screws (M5 x 8) provided with the TD-20. Other screws may damage the unit.
fig.StandHolder.e
Wide
Narrow
928, 929
• When turning the unit upside-down, get a bunch of newspapers or magazines, and place them under the
four corners or at both ends to prevent damage to the buttons and controls. Also, you should try to orient
the unit so no buttons or controls get damaged.
• When turning the unit upside-down, handle with care to avoid dropping it, or allowing it to fall or tip over.
2. Attach the TD-20 and stand holder to the drum stand (such as the optional MDS-20BK).
See the owner’s manual for the stand for details on assembling the drum stand and attaching the TD-20.
005
This unit should be used only with a stand that is recommended by Roland.
006
When using the unit with a stand recommended by Roland, the rack or stand must be carefully placed so it is level
and sure to remain stable. If not using a rack or stand, you still need to make sure that any location you choose for
placing the unit provides a level surface that will properly support the unit, and keep it from wobbling.
101c
This TD-20 for use only with Roland stand MDS series. Use with other stands is capable of resulting in instability
causing possible injury.
The optional APC-33 All Purpose Clamp can be attached to a pipe of 10.5–28.6 mm radius in case you
want to mount the TD-20 on a cymbal stand or other such stand.
17
TD-20_Ref_e.book 18 ページ 2004年9月28日 火曜日 午前11時45分
Setting Up the Kit
Connecting the Pads and Pedals
Using the provided cables, connect the pads, cymbals, hi-hat, and kick trigger.
* When mounting a TD-20 on an MDS-20 drum stand, use the built-in connection cables.
Set Up Example
fig.Kit.e
TD-20 Rear Panel
10 / RIDE
11 / EDGE
8 / CRASH 1
CY-15R
CY-14C
3 / TOM 1
4 / TOM 2
PD-105
PD-105
9 / CRASH 2
CY-14C
7 / HI-HAT
HH CTRL
5 / TOM 3
2 / SNARE
TD-20
VH-12
Roland
PD-125
PD-125
PD-125
KD-120
6 / TOM 4
1 / KICK
The HI-HAT and RIDE cymbal use two cables each. See p. 21 and p. 50.
18
TD-20_Ref_e.book 19 ページ 2004年9月28日 火曜日 午前11時45分
Setting Up the Kit
An Overview of the TD-20
Connecting Headphones, Audio Equipment, Amps, or Other
Gear
fig.Connect.e
Speakers with built-in amp, etc.
L
CD/MD player, etc.
R
Stereo set, etc.
Rear Panel
Stereo phone type
Stereo phone type
Front Panel
1. Turn off the power of all devices before you
make connections.
The TD-20’s MIX IN jack allows you to play along with a
CD or other audio sources.
921
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
2. Connect the MASTER OUT L (MONO) and R
jacks on the rear panel to your audio system or
amp. Headphones should ONLY be connected
to the PHONES jack.
3. Connect the supplied power cord to the AC
inlet.
Phone type
• To adjust the volume of the device connected to the MIX
IN jack, turn the [MIX IN] knob on the TD-20’s top panel.
• The sound input from the MIX IN jack can be output
from the MASTER OUT, PHONES, or DIRECT OUT 5–8
jacks (p. 78).
926a
* When connection cables with resistors are used, the volume
level of equipment connected to the MIX IN jack may be low. If
this happens, use connection cables that do not contain
resistors, such as those from the Roland PCS series.
4. Plug the power cord plug into a power outlet.
19
TD-20_Ref_e.book 20 ページ 2004年9月28日 火曜日 午前11時45分
Setting Up the Kit
Turning On/Off the Power
941
* Once the connections have been completed (p. 18, p. 19), turn
on power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other devices.
fig.VolMin
No Sound When Hitting the Pads or Using the
Pedals?
Check the following points.
When Using an Amp or Audio System
• Is the amp or audio system connected to the TD-20’s
MASTER OUT jacks?
• Is the input of the amp or audio system properly
connected?
• Is there a problem with any connection cables?
• Is the volume turned down in the [GROUP
FADERS] sliders?
1. Turn the [MASTER] and [PHONES] completely
to the left to lower the volume to “0.”
• Is [MASTER] turned completely to the left?
2. Turn down the volume control on the
connected amp or audio system.
• Is the amp or audio system volume setting correct?
3. Push the [POWER] switch on the TD-20’s rear
panel to turn on the power.
fig.PowerOn.e
• Have the input select settings of your audio system
or amp been made correctly?
When Using Headphones
• Are the headphones connected to the PHONES jack?
• Is [PHONES] turned completely to the left?
Lower Position
ON
942
* This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
Precautions When Turning on the
Power
After the power is turned on, do NOT hit any pads or
step on the pedals until the drum kit name (following
figure) appears in the display. Doing so can cause
triggering problems.
fig.00-006
4. Turn on the power to the connected amp or
audio system.
5. While hitting a pad, gradually turn [MASTER]
(or [PHONES]) to the right to adjust the volume
level.
20
Turning Off the Power
1. Completely turn down the volume of the TD-20
and any connected external devices.
2. Turn off the power to all external devices.
3. Push the [POWER] switch on the TD-20’s rear
panel to turn off the power.
TD-20_Ref_e.book 21 ページ 2004年9月28日 火曜日 午前11時45分
Connecting the Hi-Hat (VH-12)
and Setting the “VH Offset”
Adjusting Mesh Head
Tension (PD-125/105)
Heads MUST BE TUNED BEFORE PLAYING.
Connecting the Hi-Hat
When adjusting, use a tuning key.
Clutch
screw
Like with an acoustic drum, accurate and equal head tension
is needed for correct triggering response.
On the PD-125/105, adjusting the head tension affects
only the head response, and not the pitch of the sound, as
it would on an acoustic drum.
1. Loosen the tuning bolts until a slight gap is
produced.
TRIGGER
OUTPUT
jack
to
TRIGGER INPUT
HI-HAT jack
CONTROL
OUTPUT
jack
2. Tighten all tuning bolts by fingers, as tightly as
you can.
fig.PD-Nut.e
to
HH CTRL jack
Tuning bolt
Adjusting the Offset
Washer
Slight gap
When using the VH-12, the “VH Offset” needs to be set up.
1. Loosen the clutch of the top hi-hat and let it sit
on the bottom hi-hat.
* Do NOT touch the hi-hats or the pedal.
2. Hold down [KIT] and press [TRIGGER].
The “VH offset” parameter is set automatically. (approx.
3 seconds)
Hoop
3. Using the tuning key, turn the tuning bolts two
full revolutions each, thus tightening them.
Tighten each tuning bolt one by one, observing the
numerical order shown in the figure.
fig.PD-BoltOrder
1
3
[TRIGGER] stops flashing and remains lit.
HEAD MADE BY REMO U.S.A.
fig.05-VHOffset3
5
6
If you need, make further adjustments to the parameters.
Hi-Hat Settings [F3 (HI-HAT)] (p. 46)
4
2
If you do not make VH-12’s setting correctly, it may cause
malfunction. For details, refer to the VH-12 owner’s
manual.
21
An Overview of the TD-20
Setting Up the Kit
TD-20_Ref_e.book 22 ページ 2004年9月28日 火曜日 午前11時45分
Listening to the Demo Song
The internal demo song features the TD-20’s expressive
capabilities and top quality sounds. The drums on this song
were recorded from the TD-20 system to a sequencer in real
time.
1. Press [CHAIN] and [TOOLS] simultaneously.
The “DEMONSTRATION” screen appears.
fig.Demo_70
Caution Concerning Volume
When playing back the demo song, turn [MASTER] and
[PHONES] to the left (counterclockwise) to bring the
volume level down. The sound levels (volume) of the
instruments may be louder when the demo song is
played back.
Demo Song
2. Press [F5 (PLAY)].
Cluster Hang
Copyright (C) 2004, Roland US
The demo song is played.
* Press [F4 (STOP)] to stop the demo song.
You can use [+/-] or [VALUE] to switch the kit being
used in the song, an easy way to check the sounds.
* Preset drum kits are always selected to play the demo song.
Function Buttons
[F1 (DRUMS)]
You can MUTE the enntire drum track.
[F2 (BACKING)]
You can MUTE all the backing instruments.
• You can change the volume balance with [GROUP
FADERS] (p. 24).
• Hold down [SHIFT] and press [TEMPO] to turn the
metronome click (p. 59) on/off.
The click sounds with the settings which you set before
you enter the “DEMONSTRATION” screen.
3. Press [EXIT] or [KIT] to return to the “DRUM
KIT” screen.
22
981a
* All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a violation
of applicable laws.
982
* No data for the music that is played will be output from MIDI
OUT.
TD-20_Ref_e.book 23 ページ 2004年9月28日 火曜日 午前11時45分
Operations common to all aspects TD-20 operations.
Saving Your Settings
Every time you change a value during the editing process, it’s
automatically stored in the TD-20’s memory. There’s no
“write/save” process. (except when using a memory card)
and then press [F2] (in this case, “EDIT” is displayed above
[F2]).
Changing Data Values
fig.00-004_40
Buttons, Sliders, Dial and
Knobs
References for top panel buttons, sliders, dial and knobs will
be printed in square brackets [ ]; e.g., [SETUP].
[+] and [-] (referred to in this manual as [+/-]) and the
[VALUE] dial are both used to change the values of settings.
Both methods have advantages.
[+/-]
Cursor
• Each time [+] is pressed, the value increases. Each time [-]
is pressed, the value decreases. This is convenient for fine
adjustments.
fig.00-001e_70
• When making an on/off setting, [+] will turn the setting
on and [-] will turn it off.
Cursor
Cursor refers to the highlighted characters indicating an onscreen parameter that can be set. When there is more than one
possibility within the screen, use the [CURSOR] buttons to
move it.
fig.00-002_50
• If you hold down [+] and press [-], the value will increase
rapidly. If you hold down [-] and press [+], the value will
decrease rapidly.
[VALUE] dial
The dial allows you to make major changes to the value
quickly. If you hold down [SHIFT] and turn [VALUE], the
value will change even more rapidly.
Function Buttons ([F1]–[F5])
fig.00-003_50
The [F1]–[F5] buttons are called “function buttons.” The
bottom part of the display will show the names of the
functions available for [F1]–[F5]. For example, if this owner’s
manual makes reference to [INST] - [F2 (EDIT)], press [INST],
23
An Overview of the TD-20
Button Operation and Displays
TD-20_Ref_e.book 24 ページ 2004年9月28日 火曜日 午前11時45分
Button Operation and Displays
Example: Adjusting the Snare Volume
Group Faders
1. Press [FADER] so the upper indicator is lit.
2. Move the [GROUP FADERS] [SNARE] slider.
fig.00-009
The slider position shows the current snare volume.
* After switching with [FADER], the values for the [GROUP
FADERS] sliders may not reflect the actual volume of the
sound assigned to that fader. So after switching, be sure to
move the faders a bit before making your setting.
* This will NOT affect the independent volume balance for each
kit in: Mixer Settings (p. 37).
Use [GROUP FADERS] sliders to adjust the volume.
Choosing Pads from the TD20’s Top Panel
If you press the [FADER] button, the function of the faders
will change as is explained in the chart below. An LED will
light up at the upper and lower right of the faders to indicate
which set of sounds is active.
fig.00-007_70
• When upper indicator is lit, you can adjust the volume of
following trigger inputs.
KICK
SNARE
TOMS
HI-HAT
CRASH 1
CRASH 2
RIDE
AUX
1 KICK
2 SNARE
3 TOM 1, 4 TOM 2, 5 TOM 3, 6 TOM 4
7 HI-HAT
8 CRASH 1
9 CRASH 2
10 RIDE, 11 EDGE
12 AUX 1, 13 AUX 2, 14 AUX 3, 15 AUX 4
• When lower indicator is lit, you can adjust the volume of
following trigger inputs and sequencer parts.
AUX 1
AUX 2
AUX 3
AUX 4
PERC
BACKING
CLICK
24
12 AUX 1
13 AUX 2
14 AUX 3
15 AUX 4
Percussion part (p. 55)
Backing part (p. 54)
Metronome click (p. 59)
The ([TRIG SELECT]) buttons can be used to select the pad/
trigger input to be edited without needing to hit a pad. When
you press [1], the next lower-numbered trigger will be
selected. When you press [15], the next higher-numbered
trigger will be selected. When using a rim capable pad, [RIM]
lets you know you’re editing the rim. [PREVIEW] plays the
sound in the display. So it’s easy to edit with only the TD-20
and a pair of headphones.
* When you select the hi-hat (trigger number 7), you can sound
the closed hi-hat by holding down [SHIFT] and pressing
[PREVIEW].
TD-20_Ref_e.book 25 ページ 2004年9月28日 火曜日 午前11時45分
How to Play Patterns
fig.06-003_70
Adjusting the Display
Contrast
Display contrast can be influenced by location and lighting.
When needed, adjust the display contrast by:
holding down [KIT] and turning [VALUE].
Pressing [PATTERN]. The basic screen for the sequencer
appears.
Press [+/-] or turn [VALUE] in this screen to choose a pattern.
Or press [F1 (LIST)] to choose from the pattern list.
fig.06-001
* You can also adjust it in the screen displayed by pressing
[SETUP] - [F4 (OPTION)] - [F5 (LCD)] (p. 81).
About the Display in the
Upper Right of the Screen
fig.00-005_70
Press [PLAY] to start playback of the pattern.
Press [STOP] to stop playback.
Press [STOP] again to return to the top of the pattern.
How to Turn the Metronome
(Click) On/Off
Hold down [SHIFT] and press [TEMPO] to turn ON and OFF.
* The [TEMPO] indicator can also be used as a visual
metronome (p. 59).
Many edit screens require you to hit a pad or the [PREVIEW]
button to access the parameters you want. The upper right of
the display will show the number and trigger input jack name
of the corresponding pad. The first character (“H” or “R”)
stands for Head or Rim. ([RIM] lights up when played.)
You can use the TRIGGER SELECT buttons and [PREVIEW]
to get the same results. In cases where settings for the head
and rim can be edited separately, the following characters will
also be displayed.
fig.00-006_70
How to Adjust the Tempo
fig.06-Tempo1_70
About the Preset Drum Kits
To adjust the tempo of the sequencer and click, use [+/-] or
[VALUE] in the screen displayed by pressing [TEMPO].
The TD-20 is shipped from the factory with 50 pre-loaded
drum kits. After changing the settings, you can restore the
factory settings at any time (p. 69). These drum kits are
referred to as Preset Drum Kits.
25
An Overview of the TD-20
Button Operation and Displays
TD-20_Ref_e.book 26 ページ 2004年9月28日 火曜日 午前11時45分
Playing Methods
Pad (PD-125/105)
Hi-Hat (VH-12)
fig.Play-Head.e
Head Shot
Open/Closed
Hit only the head of the pad.
With certain snare sounds,
playing position will change
the nuance of the sound.
The hi-hat tone changes smoothly and continuously from
open to closed in response to how far the pedal is pressed.
You can also play the foot closed sound (playing the hi-hat
with the pedal completely pressed down) and foot splash
sound (playing the hi-hat with the pedal fully pressed and
then instantly opening it).
Head
fig.Play-Rim.e
Rim Shot
Strike the head and the rim of
the pad simultaneously.
Pressure
When you strike the hi-hat while pressing on the pedal with
the hi-hat closed, you can then change the closed tone in
response to the pressure you place on the pedal.
Head
Rim
fig.Play-Cross.e
Cross Stick
Bow Shot
Only strike the rim of the pad.
Rim
Depending on the instrument
assigned to the rim you can
play rim shots and/or cross
stick sounds.
Rim
This playing method involves striking the middle area of the
top hi-hat. It corresponds to the sound of the “head-side” of
the connected trigger input.
fig.Play-VHBow
* To play the cross stick, be sure that you only strike the rim of
the pad. Placing your hand on the head of the pad might
prevent the cross stick sound from being played properly.
Change the Nuance of the Rim Shot
With certain snare and tom sounds, slight changes in the way
you play rim shots changes the nuance.
Edge Shot
fig.Play-Rim.e
Normal Rim Shot
(Open Rim Shot)
This playing method involves striking the edge of the top hihat with the shoulder of the stick. When played as shown in
the figure, the “rim-side” sound of the connected trigger input
is triggered.
Strike the head and rim
simultaneously.
Head
fig.Play-VHEdge.e
Rim
fig.Play-Shallow.e
Shallow Rim Shot
Simultaneously strike the head near
the rim and the rim itself.
Edge sensor
Head
Rim
* Do not strike the bottom hi-hat or the underside of the top hihat.
26
TD-20_Ref_e.book 27 ページ 2004年9月28日 火曜日 午前11時45分
Cymbal (CY-15R/14C)
Bow Shot
This is the most common playing method, playing the middle
area of the cymbal. It corresponds to the sound of the “headside” of the connected trigger input.
Choke Play
Choking (pinching) the cymbal’s edge with the hand
immediately after hitting the cymbal makes the sound stop.
Choke the location of the edge sensor shown in the figure. If
you choke an area where there is no sensor, the sound does
not stop.
fig.Play-Choke.e
fig.Play-CYBow
Roland logo
Edge sensor
Edge Shot
This playing method involves striking the edge with the
shoulder of the stick. When played as shown in the figure, the
“rim-side” sound of the connected input is triggered.
Positional Sensing
fig.Play-CYPosi
fig.Play-CYEdge.e
Edge sensor
With certain ride sounds, playing position will change the
nuance of the sound.
Bell Shot (CY-15R)
* Only TRIGGER INPUT 10 RIDE corresponds to the
positional sensing.
This playing method involves striking the bell. On the CY15R, when played as shown in the figure, the “rim-side”
sound of the connected input is triggered.
fig.Play-Bell
About the instruments corresponding to each playing
method, refer to p. 95.
* Strike the bell somewhat strongly with the shoulder of the stick.
* On the CY-14C, bell shots are not supported.
27
An Overview of the TD-20
Playing Methods
TD-20_Ref_e.book 28 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 1. Drum Kit Settings [KIT]
Choosing a Drum Kit
Selecting a Drum Kit from the
List [F1 (LIST)]
1. Press [KIT].
[KIT] lights, and the “DRUM KIT” screen appears.
You can select a drum kit by accessing the list of available kits.
fig.01-001*_70
fig.01-002_70
2. Use [+/-] or [VALUE] to select drum kits.
1. Press [KIT] - [F1 (LIST)].
The “DRUM KIT LIST” screen appears.
2. Use [VALUE], [+/-], or [CURSOR] to select a
drum kit.
Foot switches or pads can be programmed to make
selections (p. 79, p. 80).
Function Buttons
The selected or current kit number is indicated at all
times in the LED display at the left of the LCD display.
[F1 (< PAGE)]
The previous page of the list appears.
[F2 (PAGE >)]
About the “DRUM KIT” Screen
The next page of the list appears.
fig.01-001_70
A
B
A: Drum Kit Name
B: Overall Kit Effects On/Off status (p. 38)
Pressing [KIT] always takes you back to the “DRUM KIT”
screen, from any Edit mode in the TD-20.
28
3. Press [EXIT] (or just press [KIT]) to return to the
“DRUM KIT” screen.
TD-20_Ref_e.book 29 ページ 2004年9月28日 火曜日 午前11時45分
Kit Parameters [F2 (FUNC)]
1. Press [KIT] - [F2 (FUNC)].
2. Press [F1]–[F3] and [CURSOR (up/down)] to
select the parameter.
Playing Brushes [F3 (BRUSH)]
In each kit, you can choose whether sticks or brushes will be
used.
fig.01-005_70
3. Use [+/-] or [VALUE] to make settings.
Adjusting the Volume [F1 (VOLUME)]
Parameter
Brush
Switch
fig.01-003_70
Parameter
Kit Volume
Value
0–127
Pedal HH Volume
0–127
XStick Volume
0–127
Description
Volume of the entire drum
kit
Volume of the hi-hat’s foot
closed sound
Volume of cross stick sound
Assigning a Tempo for Each Kit
[F2 (TEMPO)]
Each kit can have an individual tempo setting.
When you select a kit of which Kit Tempo is set to “ON,” the
tempo you define here will be set automatically.
Value
OFF, ON
Description
OFF: for using sticks
ON: for using brushes
When Brush Switch is set to “ON,” the brush icon
appears in the “DRUM KIT” screen.
fig.01-005_70
Output Level Monitor [F5 (MONITOR)]
You can check the output level from the selected jacks.
Use [+/-] or [VALUE] to choose the jacks.
Choose from: Master, Phones, and separate stereo outs.
fig.01-005a_70
fig.01-004_70
Parameter
Kit Tempo
Value
OFF, ON
Tempo
20–260
Description
OFF: tempo is not defined
ON: tempo is defined
defined tempo
When you select a kit of which Kit Tempo is set to “ON,”
the defined tempo appears in the upper right of the
display.
fig.01-004a_70
29
Chapter 1
[KIT]
Chapter 1. Drum Kit Settings [KIT]
TD-20_Ref_e.book 30 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 1. Drum Kit Settings [KIT]
Naming a Drum Kit
[F3 (NAME)]
Each kit’s name can use up to 12 characters.
fig.01-005_70
Playing Cross Stick
[F5 (XSTICK)]
In each kit, you can choose to use/not use cross stick by
pressing [F5 (XStick)] in the “DRUM KIT” screen.
• Cross stick can be played
fig.01-007_70
1. Press [KIT] - [F3 (NAME)].
The “DRUM KIT NAME” screen appears.
2. Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
• Cross stick not possible
3. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position, and
characters after this point are moved to the right one
space.
[F2 (DELETE)]
Character at the cursor position is deleted, and characters
after this point are moved to the left one space.
[F3 (SPACE)]
Character at the cursor position is replaced by a blank
space.
[F4 (CHAR)]
Type of character at the cursor position changes between
uppercase/lowercase alphabet, or numbers and symbols.
30
fig.01-008_70
TD-20_Ref_e.book 31 ページ 2004年9月28日 火曜日 午前11時45分
Here’s how to select and edit sounds, such as the snare drum
and kick drum.
Choosing a Pad to Edit
There are two basic ways to select the sound you want to edit.
Lock the Pad You are Editing
(EDIT LOCK)
When editing instruments, you can prevent the screen from
being switched inadvertently even if you hit another pad.
1. Select the pad to be locked.
Choose by Hitting a Pad
1. Press [INST].
[INST] lights, and the “INST” screen appears.
The settings screen for the pad appears.
2. Press TRIG SELECT [LOCK] to make it light.
The pad is locked and other pads cannot be selected.
3. To release the lock, press [LOCK] to make it go
off.
fig.02-001_70
* You can change the pad to be locked by pressing TRIG
SELECT [1] or [15] even if the [LOCK] is lit.
2. Strike a pad.
The settings screen for the struck pad appears.
To select a pad’s rim, strike the rim.
Assign an Instrument to a
Pad
All the TD-20 sounds are referred to as instruments (INST).
Choose with the Trigger Select
Buttons
fig.02-001_70
1. Press [INST].
[INST] lights, and the “INST” screen appears.
2. Press TRIG SELECT [1] or [15] to select the
trigger input number.
The trigger input number is indicated in the upper part of
the screen.
3. Press TRIG SELECT [RIM] to select the head or
rim.
Head:
[RIM] is unlit.
Rim:
[RIM] is lit.
fig.02-002_70
1. Press [INST].
[INST] lights, and the “INST” screen appears.
“Group”: Type of instrument (Inst Group)
“Inst”:
Name of instrument (Inst Name)
2. Strike a pad.
The settings screen for the struck pad appears.
3. Press [CURSOR (up/down)] to move the cursor
to “Group” or “Inst.”
4. Use [+/-] or [VALUE] to select the Inst group/
instrument.
5. Press [EXIT] to return to the “DRUM KIT”
screen.
When MIDI Note Number corresponding to a pad is
received, the pad is selected and shown in the screen.
Pressing [F5 (H & R)], you can choose to set the head and
rim simultaneously or individually. When you select the
head and rim simultaneously, the rim’s instrument
number is one bigger than head.
31
Chapter 2
[INST]
Chapter 2. Drum Instrument Settings [INST]
TD-20_Ref_e.book 32 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 2. Drum Instrument Settings [INST]
Selecting an Instrument from
the List [F1 (LIST)]
Here you can select from the list of all available instruments.
Editing Drum Sounds
[F2 (EDIT)]
Editing methods differ according to the type of instrument.
fig.02-003_70
Editing an Acoustic Drum Kit (V-EDIT)
V-EDIT allows you to select a head type, shell depth, muffling,
etc. Please see the charts on next page.
1. Press [INST] - [F1 (LIST)].
The “INST LIST” screen appears.
2. Strike a pad.
The settings screen for the struck pad appears.
3. Use [VALUE], [+/-], or [CURSOR] to select the
instrument.
When V-EDIT Can Be Used
V-EDIT is possible in the following instrument groups
“KICK,” “SNARE,” “TOM,” “HI-HAT,” “CRASH,”
“SPLASH,” “CHINA,” or “RIDE.”
The following icon appears to indicate instruments which
are V-EDIT compatible.
fig.02-004_70
Function Buttons
[F1 (< PAGE)]
The previous page of the list appears.
[F2 (PAGE >)]
The next page of the list appears.
[F3 (< GROUP)], [F4 (GROUP >)]
Selects the Inst Group.
[F5 (H & R)]
Switches to select the head and rim instruments
simultaneously or individually.
Editing Other Instruments
Other instruments only allow “Pitch” and “Decay Time”
adjustment.
Editing Procedure
4. Press [EXIT] to return to the “INST” screen.
1. Press [INST] - [F2 (EDIT)].
The “INST EDIT” screen appears.
About the Display at the Lower of the
Instrument Name
fig.02-InstInfo_70
2. Strike a pad.
The settings screen for the struck pad appears.
3. Use [F1]–[F4] and [CURSOR (up/down)] to
select the parameter.
4. Use [+/-] or [VALUE] to adjust the setting.
POSI:
Instrument marked with “*P” (p. 95)
You can select the effect on/off with pressing
[F3 (CONTROL)] - [F3 (MIDI)] “Position Ctrl.”
It can be correspond only to some special inputs (p.
44)
INTRVL: Instrument marked with “*I” (p. 95)
XSTK:
Instrument marked with “*X” (p. 95)
* These appear only when [F5 (H & R)] is off.
32
5. When finished, press [EXIT] to return to the
“INST” screen.
TD-20_Ref_e.book 33 ページ 2004年9月28日 火曜日 午前11時45分
KICK
TOM
fig.02-KICK_70
fig.02-TOM_70
Parameter
[F1 (SHELL)]
Shell Depth
Beater Type
[F2 (HEAD)]
Head Type
Head Tuning
[F3 (MUFFLE)]
Muffling
Snare Buzz
[F4 (MIC)]
Mic Position
Value
NORMAL, DEEP1–2
FELT, WOOD, PLASTIC
CLEAR, COATED, PINSTRIPE
-480–+480
OFF, TAPE1–2, BLANKET, WEIGHT
OFF, 1–8
Parameter
[F1 (SHELL)]
Shell Depth
[F2 (HEAD)]
Head Type
Head Tuning
[F3 (MUFFLE)]
Muffling
Snare Buzz
[F4 (MIC)]
Mic Position
OUTSIDE2–1, STANDARD,
INSIDE1–2
Chapter 2
[INST]
Chapter 2. Drum Instrument Settings [INST]
Value
NORMAL, DEEP1–2
CLEAR, COATED, PINSTRIPE
-480–+480
OFF, TAPE1–2, FELT1–2
OFF, 1–8
OUTSIDE2–1, STANDARD,
INSIDE1–2
* PINSTRIPE is a registered trademark of Remo Inc., U.S.A.
SNARE
HI-HAT
fig.02-SNARE_70
fig.02-HIHAT_70
Parameter
[F1 (SHELL)]
Material
Shell Depth
[F2 (HEAD)]
Head Type
Head Tuning
[F3 (MUFFLE)]
Muffling
Strainer Adj.
[F4 (MIC)]
Mic Position
Value
WOOD, STEEL, BRASS
1.0”–20.0”
CLEAR, COATED, PINSTRIPE
-480–+480
OFF, TAPE1–2, DOUGHNUTS1–2
OFF, LOOSE, MEDIUM, TIGHT
OUTSIDE2–1, STANDARD,
INSIDE1–2
Parameter
[F1 (SIZE)]
Size
[F2 (TAMB)]
Add Tambourine
[F3 (FIXED)]
Fixed Hi-Hat
[F4 (MIC)]
Mic Position
Value
1”–40”
OFF, ON
NORMAL, FIXED1–4
OUTSIDE2–1, STANDARD,
INSIDE1–2
* NORMAL: The gap between the top and bottom hi-hat is
controlled by the pedal.
FIXED: The gap is fixed.
33
TD-20_Ref_e.book 34 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 2. Drum Instrument Settings [INST]
CRASH/SPLASH/CHINA/RIDE
fig.02-CYM_70
For some instruments, raising or lowering the value
beyond a certain point may not produce further change.
• KICK/SNARE/TOM: “Head Tuning”
• CRASH/SPLASH/CHINA/RIDE: “Sustain”
• Other Instruments: “Pitch” and “Decay”
Parameter
[F1 (SIZE)]
Size
[F2 (SIZZLE)]
Sizzle Type
[F3 (SUSTAIN)]
Sustain
[F4 (MIC)]
Mic Position
Value
1”–40”
OFF, RIVET, CHAIN
-31–+31
OUTSIDE2–1, STANDARD,
INSIDE1–2
Other Instruments
fig.02-005_70
Parameter
Pitch
Decay Time
Value
-480–+480
-31–+31
You can edit the instruments of the head and rim
simultaneously. Pressing [F5 (H & R)], you can choose to
set the head and rim simultaneously or individually.
* When the instruments assigned to the head and rim are not in
the same Inst Group, you only can set the head and rim
individually even if [F5 (H & R)] is set to ON.
You can restore the settings for each instrument to the
standard values by pressing [F4 (DEFAULT)] - [F5
(EXECUTE)] in the “INST” screen.
34
Some instruments have the parameters cannot be edited.
• SNARE: “Material” and “Strainer Adj.”
TD-20_Ref_e.book 35 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 2. Drum Instrument Settings [INST]
1. Press [INST] - [F3 (CONTROL)].
2. Strike a pad.
The settings screen for the struck pad appears.
You can select by using [TRIG SELECT].
3. Press [F1]–[F5] and [CURSOR (up/down)] to
select the parameter.
Playing a Pattern by Hitting a Pad
(Pad Pattern) [F1 (PATTERN)]
This function starts playback of a pattern when a pad is struck.
This function provides a very convenient way to use patterns
during a live performance.
If different patterns have been assigned to two or more pads,
striking another pad while a pattern is playing back will cause
pattern playback to switch to the newly selected pattern.
* Performances using the Pad Pattern function cannot be
recorded to sequencers.
4. Use [+/-] or [VALUE] to adjust settings.
5. When finished, press [EXIT] to return to the
“INST” screen.
Pad Pattern: OFF, P 1–100, U 101–200
Selects the played back pattern when the pad is struck.
* If all pads are set to “OFF,”
Value
Parameter
[F1 (PATTERN)]
OFF, P 1–100,
Pad Pattern
U 101–200
Pad Ptn VeOFF, ON
locity
Tap Ptn
OFF, 1–8
Mute Grp
[F2 (PDLBEND)]
-24–0– +24
Pedal Bend
Range
[F3 (MIDI)]
Tx Channel
Note No.
CH1–CH16,
GLOBAL
0 (C -)–127
(G9), OFF
0.1–8.0 (s)
OFF, ON
Gate Time
Position
Ctrl Sw
[F4 (HH MIDI)]
0 (C -)–127
Note No.
(G9), OFF
Gate
0.1–8.0 (s)
[F5 (BR MIDI)]
0 (C -)–127
Brush Note
(G9), OFF
No.
XStick Note
0 (C -)–127
No.
(G9), OFF
icon appears.
Description
Refer to Playing a Pattern
by Hitting a Pad (Pad Pattern) [F1 (PATTERN)] (p.
35).
Refer to Changing the
Pitch with the Hi-Hat Pedal [F2 (PDLBEND)] (p. 35).
Refer to MIDI Settings for
Each Pad [F3 (MIDI)] (p.
36).
Refer to MIDI Note Numbers transmitted by HiHat [F4 (HH MIDI)] (p. 36).
Refer to MIDI Note Number transmitted by Brush
Sweep/Cross Stick [F5
(BR MIDI)] (p. 36).
Pad Ptn Velocity: OFF, ON
OFF:
The pattern plays back at the velocity set for the pattern,
regardless of the strength with which the pad is struck.
ON:
The pattern plays back with the velocity changing in
response to the strength with which the pad is struck.
Tap Ptn Mute Grp: OFF, 1–8
In Tap playback (p. 58), if one sound (pattern) is set to
play before the previous sound (pattern) has finished
playing, this setting allows you to either have the
previous sound stop and the subsequent sound start
playing or have the two sounds layered.
Patterns set to the same number:
The previous sound stops while in progress, and the
subsequent sound (pattern) starts playing.
Patterns set to the different numbers:
The previous sound continues to play to the end, while
the subsequent sound (pattern) is superimposed on it.
Changing the Pitch with the Hi-Hat
Pedal [F2 (PDLBEND)]
This setting allows you use the hi-hat pedal as a pitch bender
for sounds assigned to any pad or rim.
Specified in semitone steps.
Pedal Bend Range: -24–0– +24
35
Chapter 2
[INST]
Using Pads/Pedal as
Controllers [F3 (CONTROL)]
TD-20_Ref_e.book 36 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 2. Drum Instrument Settings [INST]
MIDI Settings for Each Pad [F3 (MIDI)]
Tx Channel: CH1–CH16, GLOBAL
MIDI Note Number transmitted by
Brush Sweep/Cross Stick [F5 (BR
MIDI)]
MIDI transmit channel for each pad.
GLOBAL: Transmits on the same channel as the drum kit
part (p. 74).
Note No.: 0 (C -)–127 (G 9), OFF
OFF: Note messages are not transmitted.
Gate Time: 0.1–8.0 (s)
Brush Note No.: 0 (C -)–127 (G 9), OFF
OFF: Note messages are not transmitted.
XStick Note No.: 0 (C -)–127 (G 9), OFF
OFF: Note messages are not transmitted.
When Setting Multiple Pads to the
Same Note Number
See the column.
Position Ctrl: OFF, ON
This can be set for trigger inputs SNARE (Head, Rim),
TOM (Rim), RIDE (Bow), and AUX (Rim).
This turns the changing of the sound by strike position/
rim shot nuance ON or OFF.
When the note number is set to be more than one pad
received, the instrument assigned to the pad with the lowest
TRIGGER INPUT number is played. When note numbers for
the head and rim are duplicated, the head instrument is
played.
SNARE (Head): Strike position
SNARE (Rim):
Rim shot nuance
TOM (Rim):
Rim shot nuance
RIDE (Bow):
Strike position
AUX (Rim):
Rim shot nuance
MIDI Note Numbers transmitted by
Hi-Hat [F4 (HH MIDI)]
Open (Bow):
Bow shot of open hi-hat
An asterisk (*) appears at the right of the note number for
TRIGGER INPUTS that are not sounded.
Example:
Note number “38 (D 2)” is set for the head and rim of
TRIGGER INPUT 2 (SNARE) and the head of TRIGGER
INPUT 3 (TOM 1). In this case, when Note Number “38” is
received, the instrument assigned to the head of TRIGGER
INPUT 2 (SNARE) is played.
Closed (Bow): Bow shot of closed hi-hat
Open (Edge):
Edge shot of open hi-hat
Closed (Edge): Edge shot of closed hi-hat
Pedal:
Pedal hi-hat (Foot closed)
Note No.: 0 (C -)–127 (G 9), OFF
OFF: Note messages are not transmitted.
Gate: 0.1–8.0 (s)
See the column.
36
About the Gate Time
Percussion sound modules normally produce sound only
in response to “Note on” messages, and ignore “Note off”
messages. However general-purpose sound modules or
samplers do receive the note-off messages that are
transmitted and respond by turning off the sound.
For example, if you are triggering a “loop” in a sampler,
or other sounds then the gate time parameter is very
important. With the factory defaults (preset values), the
transmitted gate time is set to the minimum value.
TD-20_Ref_e.book 37 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 3. Mixer Settings
Mixer Parameters [MIXER]
Here you can adjust the volume, pan, etc.
You can use the GROUP FADERS to make adjustments.
1. Press [MIXER] and [FADER] simultaneously.
1. Press [MIXER].
[MIXER] lights, and [FADER] flashes.
[MIXER] lights.
2. Use [F1]–[F5] or [CURSOR (up/down)] to select
the parameter.
3. Use TRIG SELECT [1], [15], [RIM], or [CURSOR
(left/right)] to select the instrument you wish to
set.
You can also select the instrument by striking a pad.
4. Use [+/-], [VALUE], or [CURSOR (up/down)] to
make the setting.
Value
Parameter
[F1 (VOLUME)]
Volume
0–127
[F2 (PAN)]
Pan
L15–CTR–
R15
[F3 (MIN VOL)]
Minimum
0–10
Volume
[F4 (KIT VOL)]
0–127
Kit Volume
0–127
0–127
Description
Volume of each trigger input
Pan of each trigger input
Minimum volume of each
trigger input
(This is used to narrow the
dynamic range.)
Volume of the entire drum
kit
Volume of the hi-hat’s foot
closed sound
Volume of cross stick sound
2. Press [F1]–[F4] to select the parameter.
3. Move the fader which corresponds to the
TRIGGER INPUT you wish to adjust.
* You can also use [+/-], [VALUE], or [CURSOR (up/down)].
Parameter
Value
[F1 (VOLUME)]
Volume
0–127
[F2 (AMB SND)]
0–127
AMB SEND
LEVEL
[F3 (MFX SND)]
MFX SEND
0–127
LEVEL
Description
Volume of each trigger input
Send level to the ambience for
each trigger input
Send level to the multi-effects
for each trigger input
* These settings are always common to the head and rim.
4. Press [EXIT] or [FADER] to return to the “DRUM
KIT” screen.
* After pressing [EXIT] or [FADER], the values for the
[GROUP FADERS] sliders may not reflect the actual volume
of the sound assigned to that fader. Be sure to move the faders a
bit before making your setting.
* Pressing [F5 (H & R)] in the [F1 (VOLUME)], [F2 (PAN)], or
[F3 (MIN VOL)] setting screen, you can choose to set the head
and rim simultaneously or individually.
5. Press [EXIT] to return to the “DRUM KIT”
screen.
37
Chapter 3
[MIXER]
fig.03-002_70
fig.03-001_70
Pedal HH
Volume
XStick Volume
Using Group Faders to Edit (MIX EDIT)
TD-20_Ref_e.book 38 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 4. Effect Settings
Effects On and Off Switches
[EFFECTS SWITCH]
These switches allow you to turn all individual effects and
master effects on/off within each drum kit.
fig.04-001_70
Using the Compressor and
EQ [COMP/EQ]
An individual Compressor and EQ can be applied to every
sound assigned to a trigger input.
1. Press [COMP/EQ].
[COMP/EQ] lights.
2. Strike the pad you wish to set.
1. Press [EFFECTS SWITCH].
[EFFECTS SWITCH] lights, and the “EFFECTS SWITCH”
screen appears.
2. Press [F1]–[F5] to turn the following on/off.
[F1]: Pad Compressor (*1)
3. Press [F2], [F3], or [CURSOR] to select the
parameter.
Function Buttons
[F2 (COMP)]
Pad compressor parameters appear.
[F2]: Pad Equalizer (*1)
[F3 (EQ)]
[F3]: Ambience
Pad equalizer parameters appear.
[F4]: Multi-effects
4. Use [+/-] or [VALUE] to adjust the setting.
[F5]: Master Effects
3. Press [EXIT] to return to the “DRUM KIT”
screen.
* Effect on/off status appears in the “DRUM KIT” screen.
fig.04-002e_70
5. Press [F1] and/or [F4] to turn on the
compressor/equalizer for each trigger input.
[F1]: Turns the pad compressor on/off
[F4]: Turns the pad equalizer on/off
,
COMP/EQ setting is ON, EFFECTS SWITCH is ON
Effect applies.
ON
OFF
* 1: All pad compressors or pad equalizers are turned on/off
simultaneously.
,
COMP/EQ setting is ON, EFFECTS SWITCH is OFF
Effect does not apply.
COMP/EQ setting is OFF
Effect does not apply.
* Pressing [F5 (H & R)], you can choose to set the head and rim
simultaneously or individually.
The sound may be distorted in a certain setting.
38
TD-20_Ref_e.book 39 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 4. Effect Settings
About Threshold and Ratio
Compressor (COMP)
A compressor adjusts the envelope (changes in the volume
over time) and changes the character of the sound in response
to playing dynamics.
As shown in the diagram below, these parameters determine
how the volume is to be compressed.
fig.Compressor.e
0.5:1
1:1
Ratio
Output Level
fig.04-003_70
1.7:1
4:1
50:1
Value
EMPHASIS,
CRUSH
Type
COMP SOFT 1–2,
COMP MED 1–3,
COMP HARD 1–2,
LIMITER 1–2,
EXPANDER 1–3
KICK 1–3,
SNARE1–3,
TOM 1–3,
CYM 1–2,
OTHER1–3
Time
Description
EMPHASIS
Emphasizes the attack of the sound.
CRUSH
Press the attack.
This changes Thre
and ratio values.
Chapter 4
[EFFECTS]
Parameter
Attack
Threshold
Input Level
This changes Atck,
Hold, and Rels values.
Equalizer (EQ)
You can use three-band equalizers (for high, middle, and low
frequency ranges) to adjust the sound.
fig.04-004_70
For more detailed setting, adjust the parameters below.
Parameter
Gain
Value
-15– +20 (dB)
Thre
(Threshold)
-30–0 (dB)
Ratio
Atck
(Attack)
0.5:1–50:1
0–255 (ms)
Hold
2–9999 (ms)
Rels (Release)
2–9999 (ms)
Description
Output level of the
compressor
Volume level at
which compression
begins
Compression ratio
Time from when the
volume goes up the
threshold level until
the compressor effect
applies
Time compression is
kept
Time from when the
volume falls below
the threshold level
until the compressor
effect no longer applies
Parameter
Q
Value
0.5–8.0
(only for MID)
Freq
(Frequency)
20–1k (LOW),
20–8k (MID),
1k–8k (HIGH)
-15– +15 (dB)
Gain
Description
Width of the frequency
range
A higher Q narrows
the affected area.
Point at which the
boost/cut will occur
Amount of boost/cut
39
TD-20_Ref_e.book 40 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 4. Effect Settings
Ambience [AMBIENCE]
Multi-Effects [MULTI EFFECTS]
You can choose the type of room where the drums are to be
played and modify the sound.
The multi-effects allow you to further customize your sound
and also provides a choice of output configurations.
fig.04-005_70
fig.04-006_70
1. Press [AMBIENCE].
1. Press [MULTI EFFECTS].
[AMBIENCE] lights.
[MULTI EFFECTS] lights.
2. Press [F2]–[F4] or [CURSOR] to select the
parameter.
2. Press [F2], [F3], or [CURSOR] to select the
parameter.
3. Use [+/-] or [VALUE] to adjust the setting.
3. Use [+/-] or [VALUE] to adjust the setting.
4. Press [F1] to turn the ambience on.
4. Press [F1] to turn the multi-effects on.
Parameter
[F2 (TYPE)]
Room Type
Level
[F3 (ROOM)]
Room Size
Wall Type
Mic Position
Value
Description
BEACH,
LIVING ROOM,
BATH ROOM,
STUDIO,
GARAGE,
LOCKER ROOM,
THEATER, CAVE,
GYMNASIUM,
DOME STADIUM
0–127
Location where the
drums are played
TINY, SMALL,
MEDIUM,
LARGE, HUGE
WOOD, PLASTER, GLASS
LOW, HIGH
5 size available
Total ambience level
Level
Room Shape
0–100
[F4 (AMB SND)]
0–127
Send Level
Value
Description
REVERB,
GATE REVERB,
DELAY,
PANNING DELAY,
BEAT DELAY,
FLANGER, PHASER,
CHORUS, ENHANCER,
PITCH SHIFT, OVERDRIVE, DISTORTION,
LO-FI, RING MOD
0–127
Type of multieffects
[F3 (MFX SND)]
Send Level
0–127
Wall material
Ambience mic position
Shape of the room
Ambience send level
for each instrument
* Pressing [F5 (H & R)] in the [F4 (AMB SND)] setting screen,
you can choose to set the head and rim simultaneously or
individually.
40
Parameter
[F2 (MFX)]
Type
Total effect level
Effect SEND
level for each
instrument
* Pressing [F5 (H & R)] in the [F3 (MFX SND)] setting screen,
you can choose to set the head and rim simultaneously or
individually.
TD-20_Ref_e.book 41 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 4. Effect Settings
Multi-Effects Parameters
Parameter
Rels
(Release)
Value
0–200 (ms)
Description
Time from the start to
the completion of the
gate closing process
REVERB
Parameter
Room Type
Value
1–5
PreDly
0–100.0 (ms)
Time
0–127
HiDamp
4.0k–12.5k (Hz),
THRU
HiCut
160–12.5k (Hz),
THRU
Description
Type of reverb
1: Lite
2: Medium
3: Deep
4: Shallow
5: Thin
Time until the reverb is
heard
Duration of reverberation
Frequency above which
the reverb is reduced in
level
Frequency above which
the high-frequency content of the reverb sound
is filtered out
DELAY
Adds the delay sound.
Parameter
Time
Value
0–2000 (ms)
Feedback
-98–98 (%)
Description
Time until the delay
sound is heard
Amount of the delay
sound that is fed back
into the effect (minus:
inverts the phase)
Chapter 4
[EFFECTS]
Adds reverberation to the sound, simulating an acoustic
space.
PANNING DELAY
This is a delay effect with echoes that pan left and right.
Parameter
TimeL
TimeR
Level L
Level R
Feedback
Value
0–1500 (ms)
Description
Time until the delay
sound is heard
0–127
Volume level of the delay sound
-98–98 (%)
Amount of the delay
sound that is fed back
into the effect (minus:
inverts the phase)
GATE REVERB
This is a special type of reverb in which the reverb is cut off
without being allowed to decay naturally.
BEAT DELAY
Parameter
Room Type
Value
1–5
Time
0–127
HiCut
160–12.5k (Hz),
THRU
HiDamp
4.0k–12.5k (Hz),
THRU
Thre
(Threshold)
-60– +12 (dB)
Hold
0.05–2.00 (s)
Description
Type of reverb
1: Lite
2: Medium
3: Deep
4: Shallow
5: Thin
Duration of reverberation
Frequency above which
the high-frequency content of the reverb sound
is filtered out
Frequency above which
the reverb is reduced in
level
Volume level at which
the reverb starts to be
gated
Time from when the reverb level falls below
the Threshold until the
gate starts to close
This is a delay effect that synchronizes with a tempo in
sequencer.
Parameter
Time
Shift
Level 1
Level 2
Pan 1
Pan 2
Feedback
Value
32th note–half
note
-half note–0–
+half note
0–127
Description
Time until the delay
sound is heard
Time of shifting the interval between the 1st
and 2nd delay
Volume level of the delay sound
L15–CTR–R15
Stereo position of the
delay sound
-98–98 (%)
Amount of the delay
sound that is fed back
into the effect (minus:
inverts the phase)
* If you set Tempo, Time, and Shift to make the delay time over
1500 ms, the delay time cannot be more than 1500 ms.
41
TD-20_Ref_e.book 42 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 4. Effect Settings
FLANGER
PITCH SHIFT
Produces a metallic resonance that rises and falls somewhat
like a jet airplane taking off or landing.
Shifts the pitch of the original sound.
Parameter
Delay
LFO Rate
Depth
Feedback
Phase
Value
0–15.0 (ms)
1–128
0–127
-98–98 (%)
0–180
Description
Tone of the flanger
Frequency of modulation
Depth of modulation
Amount of the flanger
sound that is fed back into
the effect (minus: inverts
the phase)
Spatial spread of the
sound
Parameter
Mode
Value
1–5
Delay
0–100.0 (ms)
Coarse
-24–12
Fine
-100–100
Feedback
-98–98 (%)
PHASER
Adds a phase-shifted sound to the original sound, producing
a swirling modulation.
Parameter
Freq
LFO Rate
Depth
Resonance
Value
100–8000 (Hz)
1–128
0–127
0–127
Description
Basic frequency at which
the sound will be modulated
Frequency of modulation
Depth of modulation
Amount of feedback
OVERDRIVE
Creates a soft distortion similar to that produced by vacuum
tube amplifiers.
Parameter
Drive
HF Level
Value
0–127
0–127
LF Bypass
OFF, ON
Expanse
OFF, ON
CHORUS
Gives richness and spaciousness to the sound.
Parameter
Delay
LFO Rate
Depth
Phase
Value
8.0–30.0 (ms)
1–128
0–127
0–180
Description
Tone of the chorus
Frequency of modulation
Depth of modulation
Spatial spread of the
sound
ENHANCER
Controls the overtone structure of the high frequencies,
adding sparkle and brightness to the sound.
Parameter
Sens
LF Level
42
Value
0–127
0–127
Description
Sensitivity of the enhancer
Volume level of the low
frequency range of the direct sound
Description
Setting a higher value results in a slower response,
but steadier pitch.
Time until the pitch-shifted sound is heard
Amount of pitch shift
(semitone steps)
Amount of pitch shift (2cent steps)
Amount of the pitch-shifted sound that is fed back
into the effect (minus: inverts the phase)
Description
Amount of distortion
Level of high frequency
range
Bypass for the low frequency range
When this is set to
“OFF,” the low frequency range also has a distortion sound.
Adding the spatial spread
of the sound
DISTORTION
Produces a more intense distortion than Overdrive.
Parameter
Gain
HF Level
Value
0–127
0–127
LF Bypass
OFF, ON
Expanse
OFF, ON
Description
Amount of distortion
Level of high frequency
range
Bypass for the low frequency range
When this is set to
“OFF,” the low frequency range also has a distortion sound.
Adding the spatial spread
of the sound
TD-20_Ref_e.book 43 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 4. Effect Settings
Intentionally degrades the sound quality for creative
purposes.
Parameter
Fs Rate
Bit
BPF Cutoff
Value
OFF, 1/2–1/32
OFF, 15–1
0–100
BPF Mix
0–127
Description
Sample rate
Number of bits in data
Cutoff frequency of the
BPF (Band Pass Filter)
Amount of mixing the
sound that goes through
the BPF
Parameter
Release
Value
0–100
Gain
-60– +12
(dB)
[F3 (M EQ)]
Type
SHELV
(Shelving),
PEAK
(MID: fixed
to “PEAK”)
RING MOD
Applies amplitude modulation (AM) to the input signal,
producing bell-like sounds.
Parameter
Freq
Value
0–127
Description
Frequency at which
modulation is applied
Q
Freq (Frequency)
Gain
0.5–8.0
(only when
Type is set
to “PEAK”)
20–1k
(LOW), 20–
16K (MID),
1k–16k
(HIGH)
-12– +12
Description
Time from when the volume
falls below the threshold level until the compressor effect
no longer applies
Output volume of compressor
SHELVE:
Entire range above/below
the selected frequency range
is boosted/cut
PEAK:
The vicinity of the selected
frequency range is boosted/
cut
Width of the frequency
range
A higher Q narrows the affected area.
Point at which the boost/cut
will occur
Amount of boost/cut
Master Effects [MASTER
COMP/EQ]
The sound may be distorted in a certain setting.
A stereo compressor (limiter)/three-band equalizer provides
final audio touches to the total sound of the TD-20. Can be
used for each kit and/or all kits.
fig.04-007_70
You can use the master effect on “per kit” basis, or as a
global one (p. 80).
1. Press [MASTER COMP/EQ].
[MASTER COMP/EQ] lights.
2. Press [F2], [F3], or [CURSOR] to select the
parameter.
3. Use [+/-] or [VALUE] to adjust the setting.
4. Press [F1] to turn the master effects on.
Value
Parameter
[F2 (M COMP)]
-60–0 (dB)
Threshold
Ratio
Attack
1:1–100:1
0–100
Description
Volume level at which compression begins
Compression ratio
Time from when the volume
goes up the threshold level
until the compressor effect
applies
43
Chapter 4
[EFFECTS]
LO-FI
TD-20_Ref_e.book 44 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 5. Trigger Settings [TRIGGER]
Selecting the Pad Type [F1
(BANK)]
To be sure the TD-20 accurately receives signals sent from the
pads, select the trigger type (the type of pads being used) for
each trigger input.
Trigger Type
A trigger type is a group of trigger settings with values
optimally adjusted for a particular pad. Indications such as
“KD120,” “PD125,” or “VH12,” etc. in the above display
correspond to this. When you select a trigger type for a
connected pad, each of the parameters is set to the most
appropriate values for that pad, allowing you to play it
without encountering problems with the settings. Only when
factors unrelated to the selection of the proper trigger type
prevent you from getting good results in performance should
you fine-tune the individual parameters for the pad you are
using.
Trigger Bank
Trigger Banks allow you to store the 15 trigger settings as a
single unit of information. The large number at the left edge of
the above display is the Trigger Bank number. Move the
cursor to this area to select the Trigger Bank.
1. Press [TRIGGER] - [F1 (BANK)].
[TRIGGER] lights, and the “TRIGGER BANK” screen will
appear.
fig.05-TrigBank_70
Trigger Type
Used Model
PD125
PD120
PD105
PD100
PD80R
PD9
PD8
PD7
PD6
KD120
KD80
KD8
KD7
CY15R
PD-125
PD-120
PD-105
PD-100
PD-80R, PD-80
PD-9
PD-8
PD-7
PD-6
KD-120
KD-80
KD-8
KD-7
CY-15R
CY12RC
CY14C
CY8
CY6
CY12H
VH12
KICK
PAD1
PAD2
RT7K
RT5S
RT3T
CY-12R/C
CY-14C
CY-8
CY-6
CY-12H
VH-12
When using a non-Roland kick trigger
When using a non-Roland pad
RT-7K
RT-5S
RT-3T
* When you select the trigger type, the trigger parameters (except
the crosstalk cancel parameters) are automatically set to the
most efficient values for each pad. Make settings for the
parameter as needed.
* When 3Way Trigger (p. 50) is set to ON, “RD CTRL” is
displayed for the trigger type for TRIGGER INPUT 11 EDGE.
It cannot be changed.
2. Press [CURSOR (left)] to move the cursor to the
Trigger Bank number.
Trigger Inputs and Pad/Playing
Methods corresponding chart
3. Use [+/-] or [VALUE] to select the Trigger Bank.
Trigger Input
4. Press [CURSOR (right)] to move the cursor to a
trigger type.
KICK
5. Strike the pad you wish to set.
The cursor will move to the trigger type for the struck
pad.
You can also select by using [CURSOR] or [TRIG
SELECT].
6. Use [+/-] or [VALUE] to select the trigger type.
44
SNARE
TOM 1–4
HI-HAT
CRASH 1, 2
RIDE
EDGE
AUX 1–4
Dual Trigger
Mesh Pad
x
o
o
x
x
x
x
o
Positional
Sensing
Rim Shot
Nuance
x
o
x
x
x
o
x
x
x
o
o
x
x
x
x
o
* Brush sweep and Cross Stick can be used only SNARE.
* Each playing method can be used with the instruments
corresponding to it (p. 95).
TD-20_Ref_e.book 45 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 5. Trigger Settings [TRIGGER]
Setting the Pad Sensitivity
[F2 (BASIC)]
When you are using pads made by other manufacturers, try
adjusting the following parameters.
1. Press [TRIGGER] - [F2 (BASIC)].
[TRIGGER] lights, and the “TRIGGER BASIC” screen will
appear.
Minimum level for the pad
(Threshold)
This setting allows a trigger signal to be received only when
the pad is above a determined force level (velocity). This can
be used to prevent a pad from sounding because of vibrations
from other pads.
In the following example, B will sound but A and C will not
sound.
fig.Threshold.e
Threshold
A
2. Use [CURSOR (up/down)] to select the
parameter.
3. Strike the pad you wish to set.
The setting screen for the struck pad will appear.
You can also select by using [TRIG SELECT].
4. Use [+/-] or [VALUE] to adjust the setting.
5. When you’re finished, press [EXIT] to return to
the “DRUM KIT” screen.
Parameter
Trig Type
Sensitivity
Threshold
Value
refer to p. 44
1–32
0–31
Curve
LINEAR, EXP1,
EXP2, LOG1,
LOG2, SPLINE,
LOUD1, LOUD2
Description
Pad sensitivity
Minimum level
for the pad
How playing dynamics changes
the volume
B
C
Threshold: 0–31
When set to a higher value, no sound is produced when the
pad is struck lightly.
Gradually raise the “Threshold” value while striking the pad.
Check this and adjust accordingly. Repeat this process until
you get the perfect setting for your playing style.
How Playing Dynamics Changes the
Volume (Velocity Curve)
This setting allows you to control the relation between playing
velocity (striking force) and changes in volume. Adjust this
curve until the response feels as natural as possible.
Curve: LINEAR
The standard setting. This produces the most natural
correspondence between playing dynamics and volume
change.
fig.VeloC-LINEAR.e
Volume
Pad Sensitivity
You can adjust the sensitivity of the pads to accommodate
your personal playing style.
Striking Force
LINEAR
This allows you to have more dynamic control over the sound
volume, based on how hard you play.
Curve: EXP1, EXP2
Sensitivity: 1–32
Compared to LINEAR, strong dynamics produce a greater
change.
Higher sensitivity allows the pad to produce a loud volume
even when played softly.
fig.VeloC-EXP.e
Volume
Volume
EXPONENTIAL 1
Striking Force
EXPONENTIAL 2
Lower sensitivity will keep the pad producing a low volume
even when played forcefully.
45
Chapter 5
[TRIGGER]
fig.05-TrigBasic_70
TD-20_Ref_e.book 46 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 5. Trigger Settings [TRIGGER]
Curve: LOG1, LOG2
Compared to LINEAR, a soft playing produces a greater
change.
Hi-Hat Settings [F3 (HI-HAT)]
fig.VeloC-LOG.e
Volume
1. Press [TRIGGER] - [F3 (HI-HAT)].
Volume
[TRIGGER] lights, and the “TRIGGER HIHAT” screen
will appear.
fig.05-TrigHH_70
Striking Force
LOG1
LOG2
Curve: SPLINE
Extreme changes are made in response to playing dynamics.
fig.VeloC-SPLINE.e
Volume
2. Use [CURSOR (up/down)] to select the
parameter.
3. Use [+/-] or [VALUE] to adjust the setting.
4. When you’re finished, press [EXIT] to return to
the “DRUM KIT” screen.
Striking Force
SPLINE
Curve: LOUD1, LOUD2
Very little dynamic response, making it easy to maintain
strong volume levels. If using drum triggers, these settings
help maintain stable levels.
fig.VeloC-LOUD.e
Volume
Volume
Striking Force
LOUD1
LOUD2
Parameter
Hi-Hat Ctrl
Type
Value
VH, FD
Description
Used Hi-Hat Controller
VH: VH-12
FD: FD-7/8
When HH Ctrl Type is set to “VH”
-100– +100
Extent of Opening Hi-Hat
Offset
The bigger the value is,
the wider the opening
extent is.
Foot Splash
-10– +10
Amount of how easy to
Sens
make the Foot Splash
Noise Cancel
1–3
Amount of strength to cancel the bow and edge noise
when you play “Foot
Close.”
The bigger the value is,
the more difficult to
have a noise excluding
the “Foot Close.”
When HH Ctrl Type is set to “FD”
90, 127
Amount of Control
CC Max
Change that is transmitted
in stepping the pedal down
completely. (*1)
CC
NORMAL,
Amount of Data ResoluResolution
HIGH
tion that is transmitted
from Hi-Hat Pedal. (*2)
*1: The bigger you set the value, the stronger the pressure
effect is when you step the pedal down completely.
*2: When you control the pitch by Hi-Hat Pedal (p. 35), the
pitch can be changed smoothly if you set “High.”
46
TD-20_Ref_e.book 47 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 5. Trigger Settings [TRIGGER]
2. Use [F1]–[F3] to select the parameter.
Adjusting the Offset of VH-12
Automatically
1. Press [TRIGGER] - [F3 (HI-HAT)].
2. Press [F5 (OFFSET)].
The “VH OFFSET ADJUSTMENT” screen will appear.
fig.05-VHOffset1_70
3. Strike the pad you wish to set.
The cursor will move to the trigger input number for the
struck pad.
You can also select by using [CURSOR] or [TRIG
SELECT].
4. Use [+/-] or [VALUE] to adjust the setting.
5. When you’re finished, press [EXIT] to return to
the “DRUM KIT” screen.
[F1 (XTALK)]: XTALK CANCEL
fig.05-Xtalk1_70
3. Loosen the clutch of the top hi-hat and let it sit
on the bottom hi-hat.
* Do NOT touch the hi-hats or the pedal.
[TRIGGER] flashes, and the “VH offset” parameter is set
automatically.
fig.05-VHOffset2_70
[F2 (MOUNT)]: MOUNT TYPE
Chapter 5
[TRIGGER]
4. Press [F5 (EXECUTE)].
Select the pad mount type here.
PAD: Using a pad mount
CYMBAL: Using a cymbal mount
fig.05-Xtalk2_70
When finished, [TRIGGER] stops flashing and remains
lit, and the following screen appears.
fig.05-VHOffset3_70
[F3 (GROUP)]: XTALK GROUP
Crosstalk Cancel affects the pads set to the same number.
fig.05-Xtalk3_70
You can also perform this operation by holding down
[KIT] and pressing [TRIGGER] (p. 21).
Eliminate Crosstalk Between
Pads [F4 (XTALK)]
When two pads are mounted on the same stand, hitting one
pad may trigger the sound from another pad unintentionally.
(This is called crosstalk.) Eliminate this by adjusting Xtalk
Cancel on the pad that is sounding inadvertently.
Crosstalk Example: If you hit the snare pad and
the tom 1 also sounds
Set the snare and tom 1 to the same group. Raise the
“XTALK CANCEL” for the pad being used for the tom 1.
The tom 1 pad will be less prone to receive crosstalk from
other pads. With a setting “OFF,” crosstalk prevention
will not work.
* If the value is set too high, and two pads are played
simultaneously, the one that is struck less forcefully may
not sound. Be careful and set this parameter to the
minimum value required to prevent crosstalk.
In some cases, you can prevent crosstalk between two
pads by increasing the distance between them.
1. Press [TRIGGER] - [F4 (XTALK)].
47
TD-20_Ref_e.book 48 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 5. Trigger Settings [TRIGGER]
Advanced Trigger
Parameters [F5 (ADVANCE)]
The following parameters (Advanced Trigger Parameters) are
automatically set to the most efficient values for each pad
when you select the Trigger Type (p. 44), and don’t require
adjustment, except if you experience any of the problems that
are discussed in the explanation of each parameter.
1. Press [TRIGGER] - [F5 (ADVANCE)].
2. Use [F1]–[F3] and [CURSOR (up/down)] to
select the parameter.
Trigger Signal Detection Time
(Scan Time)
Since the rise time of the trigger signal waveform may differ
slightly depending on the characteristics of each pad or
acoustic drum trigger (drum pickup), you may notice that
identical hits (velocity) may produce sound at different
volumes. If this occurs, you can adjust the “Scan Time” so that
your way of playing can be detected more precisely.
fig.ScanTime.e
Scan Time
3. Strike the pad you wish to set.
The setting screen for the struck pad will appear.
You can also select by using [TRIG SELECT].
Time
4. Use [+/-] or [VALUE] to adjust the setting.
5. When you’re finished, press [EXIT] to return to
the “DRUM KIT” screen.
Parameter
[F1 (SCAN)]
Value
Description
Scan Time: 0–4.0 (ms)
While repeatedly hitting the pad at a constant force, gradually
raise the Scan Time value from 0 msec, until the resulting
volume stabilizes at the loudest level. At this setting, try both
soft and loud strikes, and make sure that the volume changes
appropriately.
* As the value is set higher, the time it takes for the sound to be
played increases. Set this to the lowest value possible.
Trig Type
Scan Time
Retrig Cancel
Mask Time
refer to p. 44
0–4.0 (ms)
Trigger signal detection
time
1–16
Detecting trigger signal
attenuation
0–64 (ms)
Double triggering prevention (p. 49)
[F2 (RIM)]
Detecting Trigger Signal Attenuation
(Retrigger Cancel)
Important if you are using acoustic drum triggers. Such
triggers can produce altered waveforms, which may also
cause inadvertent sounding at Point A in the following figure
(Retrigger).
fig.Retrigger.e
A
Trig Type
Rim Gain
RimShot Adjust
XStick Thrshld
refer to p. 44
0–3.2
Rim/Edge dynamic response (p. 49)
0–8.0
Rim shots response (p. 49)
0–127
Cross stick response (p.
49)
[F3 (3-WAY)]
Time
This occurs in particular at the decaying edge of the
waveform. Retrigger Cancel detects such distortion in and
prevents retriggering from occurring.
Retrig Cancel: 1–16
While repeatedly striking the pad, raise the “Retrig Cancel”
value until retriggering no longer occurs.
3Way Trigger
(Ride & Edge)
[F5 (NAME)]
48
OFF, ON
Playing Bow/Bell/Edge
(p. 50)
Trigger Bank Name (p. 50)
* Although setting this to a high value prevents retriggering, it
then becomes easy for sounds to be omitted when the drums
played fast (roll etc.). Set this to the lowest value possible while
still ensuring that there is no retriggering.
TD-20_Ref_e.book 49 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 5. Trigger Settings [TRIGGER]
Double Triggering Prevention
(Mask Time)
Rim Shots Response (Rim Shot Adjust)
When a PD-125/120/105/80R or RT-5S (trigger) is connected,
you can adjust the sensitivity of the rim response.
RimShot Adjust: 0–8.0
There are some cases that you have a rim sound unexpectedly
when you hit the head strongly. You can improve this
situation with decreasing the value of “RimShot Adjust.”
* When you set the value too small, it might be difficult to play
the rim sound.
Cross Stick Threshold
(XStick Thrshld)
When playing a kick trigger the beater can bounce back and
hit the head a second time immediately after the intended
note—with acoustic drums sometimes the beater stays against
the head—this causes a single hit to “double trigger” (two
sounds instead of one). The Mask Time setting helps to
prevent this. Once a pad has been hit, any additional trigger
signals occurring within the specified “Mask Time” (0–64
msec) will be ignored.
When a PD-125/120/105/80R or RT-5S (trigger) is connected,
fig.MaskTime.e
XStick Thrshld: 0–127
Mask Time
you can determine the “cross over point” between the cross
stick and a rim shot sounds.
Setting this to a higher value makes it easier to get cross stick
sounds. When set to “0,” playing a cross stick produces the
open rim shot sound.
Time
* Increasing the value excessively may cause the cross stick to
sound as well when the open rim shot is played.
fig.MaskTime.e
Sound not produced
High
Mask Time: 0–64 (ms)
When using a kick trigger, try to let the beater bounce back
and hit the head very quickly, then raise the “Mask Time”
value until there are no more sounds made by the beater
rebound.
* When set to a high value, it will be difficult to play very
quickly. Set this to as low a value as you can.
Volume Levels
Adjust the “Mask Time” value while playing the pad.
Rim Shot
Sound
Cross Stick
Sound
Low
If two or more sounds are being produced when you
strike the head just once, then adjust Retrig Cancel.
Rim/Edge Dynamic Response
(Rim Gain)
Soft
Striking
force
Hard
Cross Stick Threshold
(0–127)
When a PD-125/120/105, PD-80R, PD-9/8/7, CY series pad,
VH-12, or RT-5S (trigger) is connected, you can adjust the
relation between your playing velocity (force) on the rim/
edge and the resulting volume level.
Rim Gain: 0–3.2
Higher value allows the rim/edge to produce a loud volume
even when played softly. Lower value will keep the rim/edge
producing a low volume even when played forcefully.
49
Chapter 5
[TRIGGER]
You can also eliminate this problem of retriggering with
the Mask Time setting. Mask Time does not detect trigger
signals if they occur within the specified amount of time
after the previous trigger signal was received. Retrigger
Cancel detects the attenuation of the trigger signal level,
and triggers the sound after internally determining which
trigger signals were actually generated when the head
was struck, while weeding out the other false trigger
signals that need not trigger a sound.
TD-20_Ref_e.book 50 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 5. Trigger Settings [TRIGGER]
Playing Bow, Bell, and Edge
(3-Way Triggering)
Naming a Trigger Bank [F5 (Name)]
Each trigger bank can be named (up to 12 characters).
When using the CY-15R or CY-12R/C for the RIDE, you can
three way triggering (bow, bell, and edge shot) performance
are possible.
fig.05-BankName_70
3Way Trigger: OFF, ON
Connect as shown below, set 3Way Trigger to “ON.”
fig.05-Ride.e
Ride
CY-15R or CY-12R/C
1. In the “TRIGGER BANK” screen, select the
trigger bank you want to name.
2. [F5 (ADVANCE)] - [F5 (NAME)].
The “TRIGGER BANK NAME” screen appears.
3. [CURSOR (left/right)] to move the cursor to the
character to be changed.
BOW/BELL
4. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
BOW/EDGE
TD-20 Rear Panel
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position.
[F2 (DELETE)]
Character at the cursor position is deleted.
[F3 (SPACE)]
Character at the cursor position is replaced by a blank
space.
[F4 (CHAR)]
Character at the cursor position changes between
uppercase/lowercase alphabet, or numbers and symbols.
EDGE
RIDE
Correspondences Between Playing
Method and Trigger Input
Playing Method
Bow Shot
Bell Shot
Edge Shot
TD-20 TRIGGER INPUT
10 RIDE head
10 RIDE rim
11 EDGE rim
* Head-side tone for the TRIGGER INPUT 11 EDGE cannot be
sounded.
* When 3Way Trigger is set to “ON,” “RD CTRL” is displayed
for the trigger type for TRIGGER INPUT 11 EDGE. It cannot
be changed.
50
5. When finished, Press [EXIT].
TD-20_Ref_e.book 51 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
The collective performance of these six parts is called a
pattern.
Preset Patterns (Pattern P 1–100)
Settings in Preset patterns cannot be modified. These patterns
are provided for use in practicing or live performances.
User Patterns (Pattern U 101–200)
These are patterns for you to use as you wish. You can record
directly from the pads or an external MIDI keyboard in real
time (p. 61). User pattern settings are saved automatically.
Using Preset Patterns
About Preset Pattern Copyright
The sounds, phrases and patterns contained in this product are
sound recordings protected by copyright. Roland hereby grants to
purchasers of this product the permission to utilize the sound
recordings contained in this product for the creation and
recording of original musical works; provided however, the
sound recordings contained in this product may not be sampled,
downloaded or otherwise re-recorded, in whole or in part, for any
other purpose, including but not limited to the transmission of all
or any part of the sound recordings via the internet or other
digital or analog means of transmission, and/or the manufacture,
for sale or otherwise, of any collection of sampled sounds, phrases
or patterns, on CD-ROM or equivalent means.
The sound recordings contained in this product are the original
works of Roland Corporation. Roland is not responsible for the use
of the sound recordings contained in this product, and assumes no
liability for any infringement of any copyright of any third party
arising out of use of the sounds, phrases and patterns in this product.
Basic Operation
fig.06-001
Chapter 6
[PLAY]
The TD-20’s sequencer organizes music into six parts. The
Drum Kit part is used to record/play back what is played on
the pads. Additionally, Melody Part, Bass Part, Backing 1 Part,
and Backing 2 Part are the four backing instrument parts, and
there is another Percussion part.
As you cannot record over a preset pattern, the following
appears in the display if you press [REC].
fig.06-002_70
If you want to change, edit, or record any Preset pattern
settings, copy them to a User pattern (p. 64).
[PATTERN]:
Selects patterns. This displays the basic screen for the
sequencer.
[STOP]
Stops playback of the pattern. When pressed while the
pattern is stopped, this returns you to the beginning of
the pattern.
[PLAY]
Starts playback of the pattern.
[REC]
Enters record-standby mode.
[TEMPO]
Sets the Tempo (p. 53).
[CURSOR (up)]
When pressed while the pattern is stopped, this returns
you to the beginning of the pattern.
[CURSOR (left)]
When pressed while the pattern is stopped, this returns
you to the previous measure in the pattern.
[CURSOR (right)]
When pressed while the pattern is stopped, this advances
you to the next measure in the pattern.
[CURSOR (down)]
When pressed while the pattern is stopped, this advances
you to the end of the pattern.
* [CURSOR] cannot be used while the pattern is played back.
51
TD-20_Ref_e.book 52 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Choosing a Pattern
[PATTERN]
Select a Pattern from the List
[F1 (LIST)]
Here you can select patterns from a list of pattern names.
fig.06-003_70
Pattern number, pattern name, beat, measure length, pattern
playback type, and tempo are displayed.
fig.06-List_70
1. Press [PATTERN].
[PATTERN] lights, and the “PATTERN” screen appears.
2. Use [+/-] or [VALUE] to select the pattern.
1. Press [PATTERN] - [F1 (LIST)].
* If you press [F5 (NEW)], an empty pattern with the lowest
number is called up.
About the “PATTERN” screen.
The “PATTERN LIST” screen appears.
2. Use [VALUE], [+/-], or [CURSOR (up/down)] to
select the pattern.
Function Buttons
fig.06-004_70
F
E
G
[F1 (▲ PAGE)]
The previous page of the list appears.
[F2 (PAGE ▼)]
The next page of the list appears.
C
D
B
A
A: Pattern Number
Currently selected pattern number.
B: Pattern Name
The name of the currently selected pattern.
C: Pattern Type
“P” is displayed for preset patterns, and “U” is
displayed for user patterns. When choosing an empty
pattern, an asterisk (*) appears.
D: Pattern Playback Type (p. 58)
[F5 (NEW)]
An empty pattern with the lowest number is called up.
3. Press [EXIT] to return to the “PATTERN”
screen.
Playing Back a Pattern
[PLAY]
fig.06-Play_70
E: Measure Number
Playback begins from the measure indicated here
when [PLAY] is pressed.
F: Beat
G: Part Mute Status (p. 54)
1. Select the pattern to play.
2. Press [PLAY].
When you have finished making the settings, press
[PATTERN] to bring up this screen. This prevents data
from being overwritten inadvertently during
performance.
[PLAY] lights, and playback of the pattern begins.
3. Press [STOP] to stop playback of the pattern.
[PLAY] goes off, and returns to the beginning of the
measure played at that moment.
4. Press [STOP] once again to return to beginning
of the pattern.
52
TD-20_Ref_e.book 53 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Tempo Adjustment
1. Press [TEMPO].
2. [TEMPO] lights, and the “TEMPO” screen
appears.
fig.06-Tempo1_70
Synchronizing with an External MIDI
Device
This section discusses the settings that allow an external MIDI
sequencer and the TD-20’s sequencer to be synchronized. The
device that is playing back is called the “master” and the device
that is synchronizing to the playback is called the “slave.”
1. Press [TEMPO].
[TEMPO] lights, and the “TEMPO” screen appears.
2. Press [F2 (SYNC)].
The “TEMPO SYNC” screen appears.
3. Use [+/-] or [VALUE] to select the tempo.
fig.06-Tempo4_70
4. Press [EXIT] to return to the “DRUM KIT”
screen.
Setting the Tempo by Hitting a Pad
(Tap Tempo)
3. Use [+/-] or [VALUE] to make settings.
4. Press [KIT] to return to the “DRUM KIT” screen.
1. Press [TEMPO].
[TEMPO] lights, and the “TEMPO” screen appears.
2. Press [F3 (TAP)].
The “TAP TEMPO” screen appears.
fig.06-Tempo2_70
3. Press [CURSOR (up)] to move the cursor to
“Tap Switch.”
4. Use [+/-] or [VALUE] to set to “ON.”
5. Press [CURSOR (down)] to move the cursor to
“Tap Pad.”
6. Use [+/-] or [VALUE] to select the pad (or
[PREVIEW]) to use for Tap Tempo function.
Parameter
Sync Mode
Value
INTERNAL, EXTERNAL,
AUTO, REMOTE
Description
See below.
INTERNAL:
The TD-20’s tempo setting will be used for playback/
recording. When shipped from the factory, this setting is
selected.
EXTERNAL:
The TD-20’s sequencer will operate in accordance with
tempo data (MIDI Clock) from the external device.
AUTO:
This is a convenient setting that combines features of both
the INTERNAL and EXTERNAL settings. When no
synchronization signal is being received, the TD-20’s
tempo setting will be used for playback/recording. When
a synchronization signal is being received from an
external device, the TD-20 will sync to that signal.
REMOTE:
The TD-20 will obey start/pause/stop messages from an
external device, but will playback according to its own
tempo setting.
7. Press [KIT] to return to the “DRUM KIT” screen.
Synchronizing to the playback of an
external sequencer
When you hit the pad (or [PREVIEW] selected in the step 5,
the tempo is displayed at the upper right of the display.
In this case, the TD-20 will be the slave and an external
sequencer will be master.
fig.06-Tempo3_70
1. Connect the TD-20’s MIDI IN connector with a
MIDI cable to the MIDI OUT connector of the
external sequencer.
2. Set Sync Mode to “EXTERNAL.”
3. Begin playback on the external sequencer.
Synchronized playback will begin.
53
Chapter 6
[PLAY]
You can set the tempo by hitting a pad or [PREVIEW] two or
more times at quarter-note intervals of the desired tempo.
TD-20_Ref_e.book 54 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Part Settings [F2 (PART)]
Make Settings for the Backing Part
[F2 (BACKING)]
PATTERN PART screen (Only for User Pattern)
Here you can select the instrument used for the backing parts
(other parts than drum kit part and percussion part), etc.
fig.06-Part_70
1. Press [PATTERN] - [F2 (PART)].
The “PATTERN PART” screen appears.
2. Press [F2 (BACKING)].
Muting a Specific Part [F1 (MUTE)]
You can mute specific parts in user patterns.
The “MELODY (BASS, BACKING1, BACKING2)PART”
screen appears.
fig.06-Backing_70
1. Press [PATTERN] - [F2 (PART)].
The “PATTERN PART” screen appears.
2. Press [F1 (MUTE)].
3. Press [F1]–[F4] to select the part you wish to
set.
The “PART MUTE” screen appears.
fig.06-Mute1_70
[F1]: Melody Part
[F2]: Bass Part
[F3]: Backing 1 Part
[F4]: Backing 2 Part
3. Press [F1]–[F5] to turn each part muted or
played.
[F1]: Melody Part
4. Press [CURSOR (up/down)] to select the
parameter.
5. Use [+/-] or [VALUE] to make settings.
[F2]: Bass Part
[F3]: Backing 1 Part + Backing 2 Part
Parameter
Inst
[F4]: Percussion Part
[F5]: Drum Kit Part
4. Press [PATTERN] to return to the “PATTERN”
screen.
Key Shift
Value
Refer to Backing
Instrument List
(p. 98)
-24–0– +24
Bend Range
0– +24
* You can check the part mute status in the “PATTERN” screen.
fig.06-Mute2_70
MUTE
54
PLAY
Description
Part Instrument
Shifts the overall
pitch (in semitone steps).
Amount of
change in pitch
with pitch bend
at the maximum
level (in semitone
steps).
TD-20_Ref_e.book 55 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Instrument Numbers/Instrument
Names
You can change the tone by changing the instrument
number. Selecting different variations within each
instrument number changes the instrument name, with a
different tone being selected.
Instrument numbers correspond to the program numbers
(1-128).
Percussion Part Settings [F3 (PERC)]
Choosing a Percussion Set
An assembled group of different percussion instruments is
called a percussion set. There are 8 percussion sets, with
percussion instruments assigned to each note number (128).
So multiple instruments can be used at one time. They can be
edited and use the effects unit of the backing instruments.
1. Press [PATTERN] - [F2 (PART)].
Variation Tones
The “PATTERN PART” screen appears.
These are slightly varied tone types found in an
instrument number. The number of variation tones varies
with the instrument number.
2. Press [F3 (PERC)].
The “PERCUSSION PART” screen appears.
fig.06-PercPart_70
fig.06-Variation_70
Number of
Variation Tones
3. Use [+/-] or [VALUE] to select the percussion
set.
Chapter 6
[PLAY]
Instrument Name
Percussion Set Settings
Master Tuning
Here you can adjust the overall tuning for the Melody, Bass,
Backing 1, and Backing 2 part.
1. In the “PERCUSSION PART” screen, press [F5
(EDIT)].
The “PERCUSSION SET EDIT” screen appears.
fig.06-PercSet_70
1. Press [PATTERN] - [F2 (PART)] - [F2
(BACKING)] - [F5 (M TUNE)].
The “MASTER TUNE” screen appears.
fig.06-Tune_70
2. Make settings of the percussion set.
3. When finished, press [EXIT] to return to the
“PERCUSSION PART” screen.
2. Use [+/-] or [VALUE] to make setting.
Master Tune: 415.3–466.2Hz
* You can set this to 440.0 Hz by pressing [F5 (440 Hz)].
Selecting a Percussion Instrument
Select an instrument for each note number.
1. Press [CURSOR (up/down)] to select the note
number you wish to set.
2. Use [VALUE] or [+/-] to select the instrument.
You can listen the sound of instrument by pressing
[PREVIEW].
55
TD-20_Ref_e.book 56 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Selecting a Percussion Instrument
from the List [F1 (LIST)]
Here you can select from the list of all available instruments.
1. Press [CURSOR (up/down)] to select the note
number you wish to set.
2. Press [F1 (LIST)].
The “PERCUSSION SET INST LIST” screen appears.
Parameter
Pan
Pitch
Decay Time
Cho Send Level
Value
L15–CTR–R15
-480–+480
-31–+31
0–127
Rev Send Level
0–127
CC
0–127
Description
Stereo position
–
–
Amount of chorus
Amount of reverb
See below.
fig.06-PercList_70
CC: Specifies how the instrument which changes the tone
like a snare (striking position) or hi-hat (pedal position)
sounds.
3. Use [VALUE], [+/-], or [CURSOR] to select the
instrument.
4. Press [EXIT] to return to the “PERCUSSION
SET EDIT” screen.
Naming a Percussion Set [F3 (NAME)]
Function Buttons
Each percussion set can be named (up to 12 characters).
fig.06-PercName_70
[F1 (< PAGE)]
Previous page of the list appears.
[F2 (PAGE >)]
The next page of the list appears.
[F5 (OFF)]
1. Press [F3 (NAME)].
Selects the instrument #561 (OFF).
4. Press [EXIT] to return to the “PERCUSSION
SET EDIT” screen.
The “PERCUSSION SET NAME” screen appears.
2. Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
Making the Settings for Each
Percussion Instrument [F2 (EDIT)]
3. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Set the volume, pan, pitch, decay, etc. for each percussion
instrument.
Function Buttons
1. Press [F2 (EDIT)].
[F1 (INSERT)]
The “PERCUSSION SET EDIT” screen appears.
fig.06-PercEdit_70
A blank space is inserted at the cursor position.
[F2 (DELETE)]
Character at the cursor position is deleted.
[F3 (SPACE)]
Character at cursor position is replaced by a blank space.
[F4 (CHAR)]
2. Press [CURSOR] to select the parameter.
3. Use [+/-] or [VALUE] to make settings.
Parameter
Perc Note
Value
0 (C -)–127 (G 9)
(Inst)
Refer to Drum Instrument List (p.
92).
0–127
Volume
56
Description
Note number to
be set
Instrument
–
Character at the cursor position changes between
uppercase/lowercase alphabet, or numbers and symbols.
4. Press [EXIT] to return to the “PERCUSSION
SET EDIT” screen.
TD-20_Ref_e.book 57 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Volume/Pan Settings for Each Part
[F4 (MIXER)]
* Drum part cannot be set here. Set in the MIXER settings (p.
37).
* To adjust volume/pan settings for each instrument of the
percussion part, refer to p. 55.
1. Press [PATTERN] - [F2 (PART)].
The “PATTERN PART” screen appears.
Effect Settings for Backing Parts [F5
(REV/CHO)]
Set the amount of reverb and chorus for each backing part.
1. Press [PATTERN] - [F2 (PART)].
The “PATTERN PART” screen appears.
2. Press [F5 (REV/CHO)].
The “REVERB/CHORUS” screen appears.
fig.06-RevCho_70
2. Press [F4 (MIXER)].
The “PART VOLUME”, “PART PAN”, “PART REVERB
SEND LEVEL”, or “PART CHORUS SEND LEVEL”
screen appears.
3. Press [CURSOR] to select the parameter.
fig.06-Mixer_70
4. Use [+/-] or [VALUE] to make settings.
5. Press [F1] and/or [F5] to turn the reverb/chorus
ON or OFF.
4. Press [CURSOR (left/right)] to select the part
you wish to set.
5. Use [+/-], [VALUE], or [CURSOR (up/down)] to
make settings.
Parameter
[F1 (VOLUME)]
PART VOLUME
[F2 (PAN)]
PART PAN
[F3 (REV SND)]
PART REVERB SEND LEVEL
[F4 (CHO SND)]
PART CHORUS SEND LEVEL
[F1]: Reverb On/Off
[F5]: Chorus On/Off
Parameter
REVERB
Type
Value
Description
Type of reverb
Type of chorus
Speed of modulation
Depth of modulation
L15–CTR–R15
Time
ROOM1,
ROOM2,
STAGE1,
STAGE2,
HALL1, HALL2,
DELAY, PANDELAY
0–127
0–127
CHORUS
Type
Rate
TYPE1–3
1–64
Depth
1–64
Value
0–127
0–127
Chapter 6
[PLAY]
3. Press [F1]–[F4] to select the parameter.
Reverb Length/
Delay Time
57
TD-20_Ref_e.book 58 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Pattern Settings [F3 (FUNC)]
Set various settings for the user patterns.
Time Signature/Number of
Measures/Tempo Settings [F1
(SETUP)]
1. Press [PATTERN].
Parameter
Play Type
Tap Reset Time
Quick Play
Description
See below.
About Play Type (LOOP, ONESHOT,
TAP, VLINK)
LOOP (
The “PATTERN PART” screen appears.
Value
LOOP, ONESHOT,
TAP, VLINK
OFF, 0.2–4.0
OFF, ON
):
After the pattern is played back all the way to the end,
playback then repeats, starting at the beginning of the
pattern. Playback continues until [STOP] is pressed.
2. Press [F3 (FUNC)] - [F1 (SETUP)].
The “PATTERN SETUP” screen appears.
Loop is useful for practicing and live performance.
fig.06-PtnSetup_70
ONESHOT (
):
Playback stops once the end of the pattern is reached.
3. Press [CURSOR] to select the parameter.
4. Use [+/-] or [VALUE] to make settings.
Parameter
Pattern Length
Value
1–999
Time Signature
Numerator: 1–15
Denominator: 2, 4, 8, 16
20–260
Tempo
Description
Number of
measures
Beat
–
Time Signature can be set on an empty pattern. You
cannot set 1/8 and 1/16-3/16.
Choosing a Playback Method [F2
(TYPE)]
1. Press [PATTERN].
The “PATTERN PART” screen appears.
2. Press [F3 (FUNC)] - [F2 (TYPE)].
The “PATTERN TYPE” screen appears.
fig.06-PtnType_70
This is a convenient feature to use when assigning
patterns to the pads (Pad Pattern; p. 35). Each time you
hit the pad to which the pattern is assigned, it will
automatically start from the beginning of the pattern.
Supplementary function for LOOP and
ONESHOT
Quick Play: OFF, ON
Quick Play starts playback of the pattern from the first
note (first event) even if when you recorded the pattern,
you left a pause at the beginning. For example if you had
just played/recorded freely, ignoring the tempo clock.
TAP (
):
When set to Pad Pattern (p. 35), the sounds are played
back in sequence each time the pad is pressed. (You can
use [PLAY] instead of a pad.)
For example if you specify “TAP” for a pattern which
contains a melody line and assign this pattern to a pad,
you can play the notes of the melody in order each time
you strike the pad. You can set the “Tap Reset Time” so
that the pattern will automatically return to the
beginning if that time interval elapses without that pad
being hit again. You can play a bass line with your kick
drum, too.
* When using Realtime Recording (p. 61) to record patterns used
for TAP playback, make the Quantize settings (p. 63) before
you begin recording.
3. Press [CURSOR (up/down)] to select the
parameter.
4. Use [+/-] or [VALUE] to make settings.
58
V-LINK (
):
Special “TAP” for the V-LINK function (p. 84).
You can switch the images in order each time you strike
the pad (or press [PLAY]).
TD-20_Ref_e.book 59 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Supplementary function for TAP and
V-LINK
Tap Reset Time: OFF, 0.2–4.0 (sec)
This function automatically returns the pattern to the
beginning if the set time interval elapses without the pad
being hit again. This is the time interval that resets the
pattern being used. If it is set to “OFF,” this function will
be disabled.
You can have the velocity of the pattern being
played change according to the force with which the
pad is tapped (Pad Pattern Velocity). Refer to p. 35.
Naming a Pattern [F5 (NAME)]
Starting and Stopping the
Metronome (Click) On/Off
1. Press [TEMPO].
[TEMPO] lights, and the “TEMPO” screen appears.
2. Press [F5] to turn the click ON and OFF.
fig.06-Click1_70
3. Press [EXIT] to return to the “DRUM KIT”
screen.
You can also turn the click on/off by holding down
[SHIFT] and pressing [TEMPO].
Each pattern can be named (up to 12 characters).
Using a Indicator as a Click
Chapter 6
[PLAY]
fig.06-PtnName_70
You can use the [TEMPO] indicator as a click.
1. Press [TEMPO].
1. Press [PATTERN] - [F3 (FUNC)] - [F5 (NAME)].
[PATTERN] lights, and the “PATTERN NAME” screen
appears.
2. Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
[TEMPO] lights, and the “TEMPO” screen appears.
2. Press [F4] to turn the [TEMPO] indicator
flashing (ON) or going off (OFF).
fig.06-Click2_70
3. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Function Buttons
3. Press [EXIT] to return to the “DRUM KIT”
screen.
[F1 (INSERT)]
A blank space is inserted at the cursor position.
[F2 (DELETE)]
Character at the cursor position is deleted.
[F3 (SPACE)]
Character at cursor position is replaced by a blank space.
[F4 (CHAR)]
Character at the cursor position changes between upper
case/lowercase alphabet, or numbers and symbols.
59
TD-20_Ref_e.book 60 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 6. Sequencer (Playback)
Setting the Click
To adjust the click level, move [GROUP FADERS] [CLICK] (p. 24).
1. Press [TEMPO] - [F1 (CLICK)].
The “CLICK SETTINGS” screen appears.
fig.06-Click5_70
2. Press [CURSOR] to select the parameter.
3. Use [+/-] or [VALUE] to make settings.
Parameter
[F1 (INST)]
Inst
Pan
Value
Description
Refer to right column.
L15–CENTER–
R15
0–127
Sound for the click
Stereo position of the
click
Amb Send
Amount of ambience
Level
for the click
You have to turn the
ambience on (p. 40).
When “---” is displayed, this level is set to
“0” automatically to prevent the click sound
from leaking.
Output
MASTER
Output destination for
+PHONES,
the click
PHONES ONLY,
You can also select
DIRECT 5,
by pressing [SETUP]
DIRECT 6,
- [F2 (OUTPUT)] (p.
DIRECT 5+6,
78).
DIRECT 7,
DIRECT 8,
DIRECT 7+8
[F2 (TIMESIG)]
Numerator: 0–13
When the numerator is
Time
Denominator:
set to “0,” no accent is
Signature
2, 4, 8, 16
added to the first beat.
Interval
1/2 (half note), 3/8 (dotted quarter note),
1/4 (quarter note), 1/8 (eighth note),
1/12 (eighth-note triplet), 1/16 (16th note)
[F3 (COUNT)]
OFF, 1 MEAS,
Adds a count in before
Count In
2 MEAS
playback.
Play
Count In
OFF, 1 MEAS,
Adds a count in before
Rec
2 MEAS
recording.
During
OFF, ON
Sets the click to play
Play
during pattern playback.
During Rec
OFF, ON
Sets the click to play
during recording.
60
Click Instruments
VOICE, CLICK, BEEP, METRONOME, CLAVES,
WOOD BLOCK, STICKS, CROSS STICK, TRIANGLE,
COWBELL, CONGA, TALKING DRUM, MARACAS,
CABASA, CUICA, AGOGO, TAMBOURINE, SNAPS,
909 SNARE, 808 COWBELL
TD-20_Ref_e.book 61 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 7. Sequencer (Recording/Editing)
Recording a Pattern [REC]
How to Record
What is played on the pads or on an external MIDI keyboard
can be recorded (Realtime Recording).
The procedure is the same when recording with pads or with
a MIDI keyboard.
Your performance will be recorded exactly as you play it,
including hi-hat control pedal movements and Positional
Sensing.
(1) Select an Empty Pattern
1. Press [PATTERN].
[PATTERN] lights, and the “PATTERN” screen appears.
fig.06-003_70
Please keep in mind that even though there are 100 user
patterns, the amount of memory available will be
determined by how much data is recorded into TD-20.
You can check the amount of memory available by
pressing [TOOLS] - [F2 (INFO)] - [F1 (MEMORY)].
2. Press [F5 (NEW)].
An empty pattern is automatically selected.
fig.07-Rec1-2_70
If all of the patterns have been used, this can’t be selected.
Delete an unneeded pattern (p. 66) before you record.
* You can also select by using [+/-] or [VALUE].
61
Chapter 7
[REC]
Storing performance data that describes every instance
where the Hi-Hat Control Pedal is used, and that
includes strike position detection rapidly consumes the
User memory.
TD-20_Ref_e.book 62 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 7. Sequencer (Recording/Editing)
(2) Set the Time Signature, the
Number of Measures, and the Tempo
1. In the “PATTERN” screen, press [F3 (FUNC)] [F1 (SETUP)].
The “PATTERN SETUP” screen appears.
fig.07-Rec2-1_70
2. Press [CURSOR] to select the parameter.
3. Use [+/-] or [VALUE] to make settings.
Parameter
Pattern Length
Time Signature
Tempo
Value
1–999
Numerator: 1–15
Denominator: 2, 4, 8, 16
20–260
Time Signature can be set on an empty pattern. You
cannot set 1/8 and 1/16–3/16.
(3) Select a MIDI Channel
Be sure that the transmit channel on your keyboard
corresponds to the MIDI channel of the part you wish to
record.
Each part has it’s own MIDI channel. The factory preset
channels are as follows:
Part
Drum Kit part
Percussion part
Melody part
Bass part
Backing 1 part
Backing 2 part
MIDI Channel
CH10
CH11
CH1
CH2
CH3
CH4
You can change the MIDI channel by pressing [SETUP] [F1 (MIDI)] - [F1 (MIDI CH)] (p. 74).
You can record the percussion part with pads by pressing
[SETUP] - [F1 (MIDI)] - [F2 (GLOBAL)] and then setting
Local Control to “ON (PERC)” (p. 75).
(4) Part Setting
If REC Mode (p. 63) is set to “Replace,” it is not necessary
to specify the Length. Recording will continue until you
press [STOP], and the number of measures recorded will
automatically become the “LENGTH” setting.
You can have a count sound (click) inserted before
recording begins by pressing [TEMPO] - [F1 (CLICK)] [F3 (COUNT)] and then setting Count In Rec (p. 60).
If you are recording from the pads,
disregard paragraphs (3) and (4) of this
section.
62
Follow the procedures described in Part Settings [F2
(PART)] (p. 54) to make settings of the parts.
TD-20_Ref_e.book 63 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 7. Sequencer (Recording/Editing)
(5) Set the Recording Method
(6) Recording
1. In the “PATTERN” screen, press [REC].
1. Press [PLAY] to begin recording.
[PLAY] flashes, and [REC] lights.
The “PATTERN REC STANDBY” screen appears, and the
click sound begins to play.
[PLAY] stops flashing and remains lit, and the
“PATTERN RECORDING” screen appears.
fig.07-Rec6-1_70
fig.07-Rec5-1_70
2. Play with pads or MIDI keyboards to record.
2. Press [CURSOR (up/down)] to select the
parameter.
3. Press [STOP] to stop recording.
[PLAY] and [REC] go off.
3. Use [+/-] or [VALUE] to make settings.
Rec Mode
Hit Pad
Start
Value
20–260
8th note–
64th note,
OFF
LOOP ALL,
LOOP 1–2,
REPLACE
OFF, ON
Description
–
See below.
See below.
When “ON,” recording
starts the instant you strike
a pad in recording standby mode. Press [F5 (HITPAD)] to turn on/off.
This function can be
used only when Local
Control (p. 75) is set to
“ON (DRUM).”
You can name the recorded pattern (p. 59).
Checking the Tones and Phrases
During Recording (Rehearsal)
The Rehearsal function temporarily suspends recording
during the recording process, allowing you to rehearse and
then quickly resume recording.
1. Start recording (p. 61).
2. While recording is underway, press [REC].
[REC] flashes, and the REHEARSAL screen appears.
Now, data from pads or keyboard cannot be recorded.
fig.07-Rehearsal_70
Quantize
Quantize is a function that corrects timing inaccuracies while
you record. Set the note value before you begin recording and
everything you play will be quantized automatically.
The value should be set to the shortest note appearing in the
phrase. When set to “OFF,” the pattern is recorded exactly as
played.
3. Press [REC] to resume recording.
[REC] lights.
* When using Tap Playback to play back a pattern you have
created, first make sure that this is not set to “OFF,” then
quantize. If set to “OFF,” then Tap Playback cannot be
executed correctly.
Rec Mode
LOOP ALL:
The entire pattern will be repeated in loop mode and you
can continually record (like overdubbing).
LOOP 1, LOOP 2:
Recording in a one or two measure loop mode.
REPLACE:
Recording will continue until you press [STOP]. Any
previously recorded data for all Parts will be erased.
63
Chapter 7
[REC]
Parameter
Tempo
Quantize
TD-20_Ref_e.book 64 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 7. Sequencer (Recording/Editing)
Editing a Pattern [F4 (EDIT)]
3. When you want to copy selected measures or
part, press [F4 (MEASURE)].
The “COPY PATTERN MEASURE” screen appears.
fig.07-Cpy4_70
You can edit user patterns.
PATTERN EDIT screen (Preset Pattern)
fig.07-PrstEdit_70
4. Press [CURSOR] to select the parameter.
5. Use [+/-] or [VALUE] to select the pattern, part,
and measures.
PATTERN EDIT screen (User Pattern)
fig.07-UserEdit_70
Src
Dst
Copying a Pattern [F1 (COPY)]
Pattern
Copysource pattern
Copy-destination pattern
Part
Copysource part
Copy-destination part
Measure
Measures to be copied (First Measure–
Last Measure)
First measure of the
copy-destination
6. Press [F5 (COPY)].
Copy the pattern as is to the User patterns.
fig.07-Cpy1
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
The confirmation screen appears.
fig.07-Cpy5_70
Src
Dst
7. Press [F5 (EXECUTE)].
You can copy selected measures of a part or pattern. Unlike
copying an entire pattern, settings such as instrument and part
volume etc. will not be copied.
* To cancel, press [F1 (CANCEL)].
fig.07-Cpy2
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Src
Dst
1. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
2. Press [F1 (COPY)].
The “COPY PATTERN” screen appears.
fig.07-Cpy3_70
• If the number of measures in the copy-source pattern and
the copy-destination pattern differ, the number of
measures in the copy-destination pattern may increase or
decrease according to this difference.
• When “ALL” is specified in copy-source part, then only
“ALL” may be specified in copy-destination part.
Additionally, if other than “ALL” is specified in copysource part, then “ALL” cannot be specified in copydestination part.
• When copying between drum kit parts and percussion
parts or backing parts, copy takes place in accord with
the predetermined correspondence between note
numbers and pads. Only note numbers assigned to pads
will be copied.
For more on note numbers and trigger inputs, refer to
Note Number (Factory Settings) (p. 96).
64
TD-20_Ref_e.book 65 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 7. Sequencer (Recording/Editing)
Connecting Two Patterns [F2
(APPEND)]
Erasing a pattern [F3 (ERASE)]
This connects two patterns to create one pattern. The pattern
specified as “Dst” will be first, and the pattern specified as
“Src” will be connected to it. The new pattern will be created
in “Dst.”
This erases the pattern. Performance data is erased, while beat,
measure length, and other settings are left intact.
fig.07-Ers1
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
fig.07-Apd1
Dst
1
2
3
Src
1
4
2
3
4
+
1
2
3
4
5
6
7
8
Dst
You can erase portions of the pattern, in measure units. The
erased portions become blank measures.
fig.07-Ers2
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
2. Press [F2 (APPEND)].
“APPEND PATTERN” screen appears.
fig.07-Apd2_70
Although the data is erased, the pattern length is
unchanged.
4. Use [+/-] or [VALUE] to select the pattern that
will come later.
1. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
Chapter 7
[REC]
3. Press [CURSOR (up)] to move the cursor to
“Src.”
2. Press [F3 (ERASE)].
The “ERASE PATTERN” screen appears.
fig.07-Ers3_70
5. Press [CURSOR (down)] to move the cursor to
“Dst.”
6. Use [+/-] or [VALUE] to select the pattern that
will come first.
7. Press [F5 (APPEND)].
The confirmation screen appears.
3. When you want to erase selected measures or
part, press [F4 (MEASURE)].
The “ERASE PATTERN MEASURE” screen appears.
fig.07-Apd3_70
fig.07-Ers4_70
8. Press [F5 (EXECUTE)].
4. Press [CURSOR (left/right)] to select the
parameter.
* To cancel, press [F1 (CANCEL)].
5. Use [+/-] or [VALUE] to select the pattern, part,
and measures.
65
TD-20_Ref_e.book 66 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 7. Sequencer (Recording/Editing)
2. Press [F4 (DELETE)].
Pattern
Pattern to be
erased
Part
Part to be
erased
Measure
Measures to be erased
(First Measure–Last Measure)
The “DELETE PATTERN” screen appears.
fig.07-Del3_70
6. Press [F5 (ERASE)].
The confirmation screen appears.
fig.07-Ers5_70
3. When you want to delete selected measures,
press [F4 (MEASURE)].
The “DELETE PATTERN MEASURE” screen appears.
fig.07-Del4_70
7. Press [F5 (EXECUTE)].
* To cancel, press [F1 (CANCEL)].
Deleting a Pattern [F4 (DELETE)]
This deletes the pattern performance, beat, measure length,
part, and all other settings, creating a empty pattern.
fig.07-Del1
1
2
3
4
5
6
7
4. Press [CURSOR (left/right)] to select the
parameter.
5. Use [+/-] or [VALUE] to select the pattern and
measures.
8
Pattern
Pattern to be deleted
Measure
Measures to be deleted
(First Measure–Last Measure)
1
6. Press [F5 (DELETE)].
You can delete unneeded measures from the pattern, then
connects the portions before and after the resulting gap.
The confirmation screen appears.
fig.07-Del5_70
fig.07-Del2
1
2
3
4
5
1
2
3
7
8
6
7
8
7. Press [F5 (EXECUTE)].
• The performance data following the deleted range is
moved forward (and the performance data for that part is
shortened).
• When all parts in the targeted range are specified,
deletion results in the pattern itself becoming shorter.
• When all measures for all parts are deleted, the pattern
itself is deleted, resulting in a pattern containing no
performance data (an empty pattern). Settings, including
beat and measure length, are restored to their initial
values as well.
1. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
66
* To cancel, press [F1 (CANCEL)].
TD-20_Ref_e.book 67 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 7. Sequencer (Recording/Editing)
Saving Patterns to a Memory Card
[F5 (CARD)]
You can use an optional CompactFlash memory card to save
pattern data.
PATTER CARD screen
fig.07-PtnCard_70
Saving a Pattern to a Memory Card
[F1 (SAVE)]
Patterns will be saved up to 100.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
3. Press [F5 (CARD)].
The CompactFlash indicator light, and the “PATTERN
CARD” screen appears.
930 (Modified)
* Never remove a CompactFlash card while the
CompactFlash indicator on the TD-20’s top panel is lit.
Doing so may corrupt the unit’s data or the data on the
CompactFlash card.
* If you insert a card being used for the first time by the TD-20,
display shows “Unformatted!” Refer to Formatting a
Memory Card [F4 (FORMAT)] (p. 72) and initialize it.
4. Press [F1 (SAVE)].
The “PATTERN SAVE” screen appears.
* Carefully insert the CompactFlash card all the way in—
until it is firmly in place.
Cards supported by TD-20 are 3.3 V CompactFlash
cards with the capacity of 16 to 512 MB.
You can check the amount of memory card available by
pressing [TOOLS] - [F2 (INFO)] - [F2 (CARD)] (p. 84).
Save/Load and Copy Functions of the TD20
5. Press [CURSOR (up)], and then use [+/-] or
[VALUE] to select the pattern you want to save.
6. Press [CURSOR (down)], and then use [+/-] or
[VALUE] to select a backup pattern to which
you want to save the pattern.
* You can select an empty backup pattern with the lowest
number by pressing [F4 (NEW)].
7. Press [F5 (SAVE)].
fig.CardImage
[CARD]
The confirmation screen appears.
[LOAD]
[SAVE]
SETUP
[COPY]
KIT
fig.07-PtnSave2_70
SETUP
KIT
INST
TD-20
fig.07-PtnSave1_70
INST
PERC
PERC
TRIG
TRIG
CHAIN
CHAIN
PATTERN
PATTERN
[LOAD]
* To cancel, press [F1 (CANCEL)].
8. Press [F5 (EXECUTE)] to save the pattern.
Backup (1–8)
[SAVE]
[PATTERN] - [EDIT] - [CARD]
PATTERN
Pattern (1–100)
CompactFlash
67
Chapter 7
[REC]
931
TD-20_Ref_e.book 68 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 7. Sequencer (Recording/Editing)
Loading a Pattern from a Memory
Card [F2 (LOAD)]
Deleting a Pattern from a Memory
Card [F3 (DELETE)]
Patterns saved on a memory card can be loaded into the TD20.
You can delete the unneeded pattern from a memory card.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
3. Press [F5 (CARD)].
The CompactFlash indicator light, and the “PATTERN
CARD” screen appears.
4. Press [F2 (LOAD)].
The “PATTERN LOAD” screen appears.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. Press [PATTERN] - [F4 (EDIT)].
The “PATTERN EDIT” screen appears.
3. Press [F5 (CARD)].
The CompactFlash indicator light, and the “PATTERN
CARD” screen appears.
4. Press [F3 (DELETE)].
The “PATTERN DELETE” screen appears.
fig.07-PtnDel1_70
fig.07-PtnLoad1_70
5. Press [CURSOR (up)], and then use [+/-] or
[VALUE] to select the backup pattern you want
to load.
6. Press [CURSOR (down)], and then use [+/-] or
[VALUE] to select the user pattern to which the
backup pattern will be copied.
5. Use [+/-] or [VALUE] to select the unneeded
backup pattern.
6. Press [F5 (DELETE)].
The confirmation screen appears.
fig.07-PtnDel2_70
7. Press [F5 (LOAD)].
The confirmation screen appears.
fig.07-PtnLoad2_70
* To cancel, press [F1 (CANCEL)].
7. Press [F5 (EXECUTE)] to delete the backup
pattern.
* To cancel, press [F1 (CANCEL)].
8. Press [F5 (EXECUTE)] to load the pattern.
68
TD-20_Ref_e.book 69 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 8. Copy Function [COPY]
You can copy drum kits, instruments, etc. to the destination of
your choice.
Copying will overwrite the data that was in the new
destination. So take caution when performing this
operation.
1. Press [COPY].
[COPY] lights, and the “COPY” screen appears. If a
CompactFlash card is inserted into the CompactFlash
card slot, the CompactFlash indicator also lights (p. 70).
4. Press [F4] or [F5].
[F4 (EXCHNG)]:
The contents of the copy-source and copy-destination are
exchanged. (This can be selected when a “USER” data is
used for the copy-source.)
[F5 (COPY)]:
The previous content of the copy-destination is
overwritten by the content of the copy-source.
The confirmation screen appears. (Example: Copying a
drum kit)
fig.08-Confirm_70
fig.08-CopyMenu_70
* To cancel, press [F1 (EXIT)].
2. Press [F1]–[F5] to select what you want to copy.
[F1 (KIT)]:
drum kit
[F2 (INST)]:
drum instrument
[F3 (PERC)]:
percussion set
[F4 (TRIG)]:
trigger bank
[F5 (CHAIN)]: drum kit chain
3. Use [CURSOR], [+/-], or [VALUE] to select the
copy-source and the copy-destination.
5. Press [F5 (EXECUTE)] to carry out the
procedure.
“EXCHNG” is convenient for changing the order of data
in a sequence.
fig.08-CopyParam_70
B
D
F
C
E
G
For details on copying a pattern, refer to p. 64.
Chapter 8
[COPY]
A
A: copy-source type (PRESET, USER, or CARD)
B: copy-source
C: copy-destination
D: backup containing the copy-source
(This appears when “CARD” is selected for the copysource type.)
E: exchange button
(This appears when “USER” is selected for the copysource type.)
F: copy-source pad
(This appears when copying a drum instrument.)
G: copy-destination pad
(This appears when copying a drum instrument.)
69
TD-20_Ref_e.book 70 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 9. Using a CompactFlash Memory Card [CARD]
You can use an optional CompactFlash memory card to save
TD-20 settings and sequencer data.
CARD MENU screen
Saving Data to a Memory
Card [F1 (SAVE)]
fig.09-CardMenu_70
All data (drum kits, percussion sets, patterns, and setup) will
be saved up to 8 sets.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
930 (Modified)
* Never remove a CompactFlash card while the
CompactFlash indicator on the TD-20’s top panel is lit.
Doing so may corrupt the unit’s data or the data on the
CompactFlash card.
931
* Carefully insert the CompactFlash card all the way in—
until it is firmly in place.
2. PRESS [CARD].
[CARD] AND the CompactFlash indicator light, and the
“CARD MENU” screen appears.
* If you insert a card being used for the first time by the TD-20,
display shows “Unformatted!” Refer to p. 72 and initialize it.
3. Press [F1 (SAVE)].
The “CARD SAVE” screen appears.
fig.09-CardSave1_70
Cards supported by TD-20 are 3.3 V CompactFlash
cards with the capacity of 16 to 512 MB.
You can check the amount of memory card available by
pressing [TOOLS] - [F2 (INFO)] - [F2 (CARD)] (p. 84).
Save/Load and Copy Functions of the TD20
fig.CardImage
5. Press [F5 (SAVE)].
fig.09-CardSave2_70
[LOAD]
[SAVE]
SETUP
[COPY]
KIT
SETUP
KIT
INST
INST
PERC
PERC
TRIG
TRIG
CHAIN
CHAIN
PATTERN
PATTERN
[LOAD]
Backup (1–8)
[SAVE]
[PATTERN] - [EDIT] - [CARD]
PATTERN
Pattern (1–100)
CompactFlash
70
* You can select an empty backup area with the lowest number
by pressing [F4 (NEW)].
The confirmation screen appears.
[CARD]
TD-20
4. Use [+/-] or [VALUE] to select a backup area to
which you want to save the data.
* To cancel, press [F1 (CANCEL)].
6. If you want to change the name of the backup
area, press [F4 (NAME)].
7. Press [F5 (EXECUTE)] to save the data.
TD-20_Ref_e.book 71 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 9. Using a CompactFlash Memory Card [CARD]
Naming a Backup [F4 (NAME)]
Each backup area can be given a name of up to 12 characters.
1. In the “CARD SAVE” confirmation screen,
press [F4 (NAME)].
The “CARD SAVE NAME” screen appears.
fig.09-CardName_70
Loading Data from a
Memory Card [F2 (LOAD)]
Data saved on a memory card can be loaded into the TD-20.
1. Insert the CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. PRESS [CARD].
[CARD] AND the CompactFlash indicator light, and the
“CARD MENU” screen appears.
2. Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
3. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
3. Press [F2 (LOAD)].
The “CARD LOAD” screen appears.
fig.09-CardLoad1_70
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position, and
characters after this point are moved to the right one
space.
[F2 (DELETE)]
Character at the cursor position is deleted, and characters
after this point are moved to the left one space.
4. Use [+/-] or [VALUE] to select the backup area
containing the data you want to load.
5. Press [F5 (LOAD)].
The confirmation screen appears.
fig.09-CardLoad2_70
[F3 (SPACE)]
Character at the cursor position is replaced by a blank
space.
[F4 (CHAR)]
Type of character at the cursor position changes between
upper case/lowercase alphabet, or numbers and
symbols.
* To cancel, press [F1 (CANCEL)].
6. Press [F5 (EXECUTE)] to load the data.
* You can also load individual kits, percussion sets, etc. from a
memory card. To do so, use the Copy function (p. 69).
Chapter 9
[CARD]
4. When you’re finished, press [F5 (SAVE)] to
return to the confirmation screen.
71
TD-20_Ref_e.book 72 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 9. Using a CompactFlash Memory Card [CARD]
Deleting Data from a
Memory Card [F3 (DELETE)]
You can delete the unneeded data from a memory card.
1. Insert the CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. PRESS [CARD].
[CARD] AND the CompactFlash indicator light, and the
“CARD MENU” screen appears.
3. Press [F3 (DELETE)].
The “CARD DELETE” screen appears.
fig.09-CardDel1_70
Formatting a Memory Card
[F4 (FORMAT)]
When a card is being used for the first time by the TD-20, you
must execute the following procedure to initialize the card.
(This prepares the card for use with the TD-20.)
When a card is initialized, all data on that card will be
lost. Make sure that it does not contain data you wish to
keep.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. PRESS [CARD].
[CARD] AND the CompactFlash indicator light, and the
“CARD MENU” screen appears.
4. Use [+/-] or [VALUE] to select the backup area
containing the unneeded data.
3. Press [F4 (FORMAT)].
The “CARD FORMAT” screen appears.
fig.09-Format1_70
5. Press [F5 (DELETE)].
The confirmation screen appears.
fig.09-CardDel2_70
4. Press [F5 (EXECUTE)].
The confirmation screen appears.
fig.09-Format2_70
* To cancel, press [F1 (CANCEL)].
6. Press [F5 (EXECUTE)] to delete the backup.
* To cancel, press [F1 (CANCEL)].
5. Press [F5 (EXECUTE)] again to start formatting.
72
TD-20_Ref_e.book 73 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 9. Using a CompactFlash Memory Card [CARD]
Checking the State of a
Memory Card [F5 (INFO)]
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20’s front
panel.
2. PRESS [CARD].
[CARD] AND the CompactFlash indicator light, and the
“CARD MENU” screen appears.
3. Press [F5 (INFO)].
The “CARD INFORMATION” screen appears.
fig.09-CardInfo_70
Backup:
number of used backup areas
Pattern:
number of saved patterns
Size:
used memory size/total memory size
4. Press [EXIT] twice (or just press [KIT]) to return
to the “DRUM KIT” screen.
The CompactFlash indicator goes off.
Chapter 9
[CARD]
For details on saving patterns, refer to Saving Patterns
to a Memory Card [F5 (CARD)] (p. 67).
73
TD-20_Ref_e.book 74 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 10. Settings for the Entire TD-20 [SETUP]
MIDI Settings and Operations
[F1 (MIDI)]
Setting the MIDI Channels for Each
Part [F1 (MIDI CH)]
For each part, you can specify the channel on which the TD-20
will receive and transmit MIDI messages.
1. Press [SETUP].
3. Press [CURSOR (up/down)] to select the
parameter.
4. Use [+/-] or [VALUE] to make settings.
Parameter
Soft Thru
Local Control
Device ID
V-LINK MIDI Ch
V-LINK Device ID
Value
OFF, ON
OFF, ON (DRUM), ON (PERC)
1–32
CH1–CH16
1–32, 128
[SETUP] lights.
2. Press [F1 (MIDI)] - [F1 (MIDI CH)].
The “MIDI CHANNEL” screen appears.
fig.10-MidiCh_70
3. Press [CURSOR (up/down)] to select the part
you wish to set.
Soft Thru
This section explains how you can use the Roland SPD-20 (a
MIDI controller) together with the TD-20’s pads to play
internal sounds and an external sound module.
When Soft Thru is set to “ON,” the messages received at MIDI
IN will also be transmitted from the MIDI OUT/THRU
connector.
fig.SoftThru.e
SPD-20
Pad or pedal
4. Press [CURSOR (left/right)] to select the
parameter.
5. Use [+/-] or [VALUE] to make settings.
Parameter
Tx/Rx
Channel
Value
OFF, ON
CH1–CH16
Description
Turns the transmitting and
receiving MIDI messages
ON or OFF.
transmit and receive channel
* Drum kit part and percussion part can be overlaid and set to
“CH10.” When a duplicate note number is received, the
instrument assigned to the drum kit part (the pad instrument)
sounds. Other note number is received, the percussion part
instrument is played.
MIDI OUT
To the MIDI IN of another
sound module or sampler
TRIGGER
INPUT
MIDI IN
* Other parts and MIDI channels cannot be overlaid.
MIDI Settings for the Entire TD-20
[F2 (GLOBAL)]
1. Press [SETUP].
[SETUP] lights.
2. Press [F1 (MIDI)] - [F2 (GLOBAL)].
The “MIDI GLOBAL” screen appears.
fig.10-MidiGlobal_70
74
TD-20
MIDI
OUT/THRU
TD-20_Ref_e.book 75 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 10. Settings for the Entire TD-20 [SETUP]
Local Control
Device ID
This is required when you want to trigger sounds in an
external sound module and/or record your performance on
an external MIDI sequencer, and NOT use the TD-20’s internal
sounds. If that is your need, then turn Local Control to “OFF.”
The trigger signals from the pads go directly to the MIDI
OUT/THRU connector.
The setting described here is necessary only when you wish to
transmit separate data to two or more TD-20 units at the same
time. Do not change this setting in any other case. (At the
factory settings, the device ID is set to “17.”)
The TD-20’s default mode is with Local Control “ON.”
If you lose track of the Device ID setting that was used
when saving data via a bulk dump, it will no longer be
possible to reload the bulk data that was saved.
fig.LocalCtrl.e
Example:
Suppose that when data was saved via bulk dump (p. 77), the
TD-20’s Device ID was set to “17.” When re-transmitting this
data back to the TD-20, it won’t receive if the Device ID is set
to something other than “17.”
Pad
Trigger Input
TD-20
fig.DeviceID.e
Transmit data
Device ID: 17
Trigger→MIDI
Converter
OUT
MIDI IN
Local Control:
OFF
MIDI OUT
IN
OUT
IN
Internal Sound Generator
Device ID: 17
External MIDI Sequenc
(Soft Thru: ON)
MIDI IN
If you make connections and record as shown, with a setting
of Local Control “ON,” duplicate notes will be re-transmitted
to the TD-20 and will not be played correctly.
System Exclusive
is not received
ON (DRUM):
ON (PERC):
The performance data from the pad is sent to the
percussion part and drum kits cannot be played. Select
this only when you record the percussion part with pads.
Device ID: 16
V-LINK MIDI Ch (V-LINK MIDI Channel)
When V-LINK function (p. 84) is on, the performance data
recorded in the backing part of the sequencer is transmitted on
this channel.
* At the factory settings, this is set to “CH16.”
When Local Control is set to “ON (PERC),” the sound
does not change if you switch drum kits because drum
kits cannot be played with pads.
V-LINK Device ID
Set this ID to match the device ID number of the Edirol DV7PR which is controlled by the TD-20. If this is set to “128,”
you can control the Edirol DV-7PR regardless of the device ID
number of it.
* At the factory settings, this is set to “128.”
75
Chapter 10
[SETUP]
The performance data from the pad is sent to the drum
kit part. Normally set to this.
TD-20_Ref_e.book 76 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 10. Settings for the Entire TD-20 [SETUP]
MIDI Messages for Detailed
Performance Expressions [F3 (CTRL)]
1. Press [SETUP].
Switching Drum Kits via MIDI
(Program Change) [F4 (PROG)]
Each drum kit/percussion set has its own program change
number.
[SETUP] lights.
2. Press [F1 (MIDI)] - [F3 (CTRL)].
The “MIDI CONTROL” screen appears.
fig.10-MidiCtrl_70
1. Press [SETUP].
[SETUP] lights.
2. Press [F1 (MIDI)] - [F4 (PROG)].
The “MIDI PROGRAM CHANGE (DRUM KIT)” or
“MIDI PROGRAM CHANGE (PERC SET)” screen
appears.
fig.10-MidiPcDrum_70
3. Press [CURSOR (up/down)] to select the
parameter.
4. Use [+/-] or [VALUE] to make settings.
Parameter
Pedal CC
Snare CC
Ride CC
Toms CC
HH Note#
Border
Value
OFF,
MODULATION(1),
BREATH(2),
FOOT(4),
EXPRESSION(11),
GENERAL1(16)–
GENERAL4(19)
0–127
Description
Control change used
for transmitting/receiving the depth to
which the hi-hat
pedal pressed
Control change used
for transmitting/receiving the strike position of the snare,
ride, and tom 1–4
See below.
* When a control change is set to be more than one parameter, an
asterisk (*) appears at the right of the unavailable parameter.
HH Note# Border
(Hi-Hat Note Number Border)
The only time you would need to change this setting is
when you are triggering an external sound module.
The note number transmitted when you strike the hi-hat will
change depending on the amount of pressure on the hi-hat
pedal. Hi-Hat Note Number Border allows you to adjust the
pedal position at which the note number switches from the
open hi-hat to the closed hi-hat.
At the factory default value (127), the closed hi-hat note
number will be transmitted only if the hi-hat pad is played
with the pedal completely depressed. If you want this note
number to be transmitted when the pedal is slightly raised, set
this to a value such as 90.
If you change the Hi-hat Note Number Border setting, the
hi-hat of a pattern that was recorded onto the internal
sequencer by playing the pads may play back in a way
that is different from the actually recorded performance.
76
fig.10-MidiPcPerc_70
3. Press [F3 (DRM KIT)], [F4 (PRC GRP)], and
[CURSOR (up/down)] to select the drum kit or
percussion set you wish to set.
[F3 (DRM KIT)]: Drum Kit
[F4 (PRC GRP)]: Percussion Set
4. Use [+/-] or [VALUE] to make settings.
The drum kits/percussion sets will switch when a Program
Change message is received from an external MIDI device.
When you switch TD-20’s drum kits/percussion sets, the
Program Change number set here is transmitted.
Turning the Reception/Transmission of
Program Changes On/Off
In the “MIDI PROGRAM CHANGE (DRUM KIT)” or “MIDI
PROGRAM CHANGE (PERC SET)” screen, pressing [F1]
turns the reception of program changes on or off, and pressing
[F2] turns the transmission on/off.
TD-20_Ref_e.book 77 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 10. Settings for the Entire TD-20 [SETUP]
Saving Data to an external MIDI
Device (Bulk Dump) [F5 (BULK)]
Saving Data
5. Start the recording process of the external
sequencer.
6. Press [F5 (EXECUTE)] to begin sending the
data.
fig.10-MidiBulk2_70
To save data, use the external sequencer as you would when
recording musical data, and perform the following steps on
the TD-20 as shown in the following diagram.
1. Connect the TD-20’s MIDI OUT connector with a
MIDI cable to the MIDI IN connector of the
external sequencer.
fig.BulkDump.e
* If you want to stop sending, press [F5 (STOP)].
7. When finished, the following screen appears.
fig.10-MidiBulk3_70
MIDI IN
Sequencer
MIDI OUT
TD-20
2. Press [SETUP].
Bulk Dump is one kind of System Exclusive message. Be
sure to use an external MIDI sequencer that is capable of
recording System Exclusive messages. In addition,
confirm that the sequencer is not set to “Do not receive
System Exclusive messages.”
[SETUP] lights.
3. Press [F1 (MIDI)] - [F5 (BULK)].
Loading Data to the TD-20
The “MIDI BULK DUMP” screen appears.
fig.10-MidiBulk1_70
At this time, all the TD-20’s current data is overwritten.
Make sure you have made the needed backup.
Transmit Data
ALL
SETUP
ALL DRUM KITS
1 DRUM KIT
ALL TRIG BANKS
1 TRIG BANK
ALL PERC
GROUPS
1 PERC GROUP
ALL PATTERNS
Description
All data, including setup, drum kits,
user percussion sets, user patterns
Trigger, pad, and other kinds of settings
All data for drum kits 1–50
Only the data for the selected drum
kit
All settings for trigger banks 1–4
Only the settings for the selected
trigger bank
All data for the user percussion sets
1–8
Only the data for the selected percussion set
All data for the user patterns 101–200
fig.BulkLoad.e
MIDI OUT
MIDI IN
Chapter 10
[SETUP]
4. Press [+/-], [VALUE], and [CURSOR (up/down)]
to select the content to be sent.
1. Connect the TD-20’s MIDI IN connector with a
MIDI cable to the MIDI OUT connector of the
external sequencer.
Sequencer
TD-20
2. Press “PLAY” on the external sequencer to
transmit the data to the TD-20.
Received data is written into the TD-20.
77
TD-20_Ref_e.book 78 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 10. Settings for the Entire TD-20 [SETUP]
Selecting Output Destinations
[F2 (OUTPUT)]
Here you can select the output destination for each TRIGGER
INPUTs, sequencer parts, and the sound input from the MIX
IN jack.
Output Destination for the Sequencer
Parts/Metronome Click/Sound Input
from MIX IN [F4 (OTHER)]
1. Press [SETUP].
[SETUP] lights.
2. Press [F3 (OUTPUT)] - [F4 (OTHER)].
Output Destination for the Drum
Instruments
The “OUTPUT ASSIGN (OTHER)” screen appears.
fig.10-OutAsgn3_70
1. Press [SETUP].
[SETUP] lights.
2. Press [F2 (OUTPUT)], and then Press [F1]–[F3]
to select the output destination jacks.
The “OUTPUT ASSIGN (MASTER)” or “OUTPUT
ASSIGN (DIRECT)” screen appears.
[F1 (MASTER)]: MASTER OUT jacks and PHONES jack
[F2 (DIR 1–4)]:
[F3 (DIR 5–8)]:
DIRECT OUT 1–4 jacks
DIRECT OUT 5–8 jacks
3. Press TRIG SELECT [1], [15], [RIM], or
[CURSOR (left/right)] to select the TRIGGER
INPUT.
You can also select by striking the pad.
4. Use [+/-], [VALUE], or [CURSOR (up/down)] to
select the output destination.
3. Press [CURSOR (left/right)] to select the
source.
AMB:
Ambience
MFX:
Multi-effects
BACK:
Backing parts of the sequencer
PERC:
Percussion part of the sequencer
CLICK:
Metronome click
MIXIN:
Sound input from the MIX IN jack
4. Use [+/-], [VALUE], or [CURSOR (up/down)] to
select the output destination.
* You can restore all output destinations to factory settings
(MASTER and PHONES) by pressing [F5 (DEFAULT)] - [F5
(EXECUTE)].
OUTPUT ASSIGN (MASTER) screen
fig.10-OutAsgn1_70
Block Diagram (p. 104)
* You can restore all output destinations to factory settings
(L+R) by pressing [F5 (DEFAULT)] - [F5 (EXECUTE)].
OUTPUT ASSIGN (DIRECT) screen
fig.10-OutAsgn2_70
* You can restore all output destinations to factory settings by
pressing [F5 (DEFAULT)] - [F5 (EXECUTE)].
78
TD-20_Ref_e.book 79 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 10. Settings for the Entire TD-20 [SETUP]
5. When setting to “USER,” press [CURSOR] to
move the cursor to “SW1” or “SW2.”
Setting the Switches
[F3 (CONTROL)]
6. Use [+/-] or [VALUE] to select the functions for
SW1 and SW2.
Using Foot Switches [F1 (FOOT SW)]
Two foot switches (BOSS FS-5U, optional) can be used with an
optional cable (PCS-31) to switch drum kits and play back
patterns.
fig.FootSw.e
PCS-31
(sold separately)
o: Functions
SW1
o (red plug)
–
KIT# INC
KIT# DEC
CHAIN# INC
CHAIN# DEC
PTN# INC
PTN# DEC
PTN PLAY
PTN STOP
STOP/PLAY
XSTICK SW
SW1
SW2
KIT# DEC
KIT# INC
CHAIN# DEC
CHAIN# INC
PTN# DEC
PTN# INC
PTN# INC
STOP/PLAY
Select from the table below.
Calls up the next kit.
Calls up the previous kit.
Calls up the next drum kit chain.
Calls up the previous drum kit chain.
Calls up the next pattern.
Calls up the previous pattern.
Plays back the pattern.
Stops the pattern.
Plays back/stops the pattern.
Switches to use/not use cross stick.
When using foot switches to switch kits in a Drum Kit
Chain (p. 82), FUNCTION should be set to “KIT
SELECT,” and you need to press the [CHAIN], so its
indicator is lit. (The Drum Kit Chain settings need to be
made beforehand.)
FS-5U
Foot Switch
FS-5U x 2 (PCS-31)
DP-2
Function
KIT SELECT
CHAIN SELECT
PATTERN SELECT
PATTERN PLAY
USER
SW2
o (white plug)
o
–: Does not function
1. Connect the foot switches to the FOOT SW jack.
2. Press [SETUP].
Chapter 10
[SETUP]
[SETUP] lights.
3. Press [F3 (CONTROL)] - [F1 (FOOT SW)].
The “FOOT SWITCH” screen appears.
fig.10-FootSw_70
4. Use [+/-] or [VALUE] to select the function for
foot switches.
79
TD-20_Ref_e.book 80 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 10. Settings for the Entire TD-20 [SETUP]
Using Pads as Switches
[F2 (PAD SW)]
Pads connected to TRIGGER INPUT 15 (AUX4) and/or 14
(AUX3) can be set to switch drum kits and play back patterns.
1. Connect the pad(s) to the TRIGGER INPUT 15
(AUX 4) and/or 14 (AUX3).
2. Press [SETUP].
[SETUP] lights.
3. Press [F3 (CONTROL)] - [F2 (PAD SW)].
The “PAD SWITCH” screen appears.
fig.10-PadSw_70
• If you don’t want sound from the pad used as a pad
switch, press [MIXER] - [F1 (VOLUME)], and set the
volume level for AUX4 and/or AUX3 to “0” (p. 37). Or
press [INST] and select “561 Off” for AUX4 and/or AUX3
(p. 31).
• When using pad switches to switch kits in a Drum Kit
Chain (p. 82), FUNCTION should be set to “KIT SELECT
1” or “KIT SELECT 2,” and you need to press the
[CHAIN], so its indicator is lit. (The Drum Kit Chain
settings need to be made beforehand.)
Other Settings [F4 (OPTION)]
Preview Button Settings
[F1 (PREVIEW)]
4. Use [+/-] or [VALUE] to select the function.
Here, the [PREVIEW] velocity can be set.
5. When setting to “USER,” press [CURSOR] to
move the cursor to “AUX3” and “AUX4.”
1. Press [SETUP].
6. Use [+/-] or [VALUE] to select the functions for
the heads and rims of AUX3 and AUX4.
2. Press [F4 (OPTION)] - [F1 (PREVIEW)].
[SETUP] lights.
The “PREVIEW” screen appears.
fig.10-Preview_70
Function
OFF
KIT SELECT1
AUX3
Head
Rim
OFF
OFF
KIT SELECT2
CHAIN SELECT1
KIT# DEC
OFF
CHAIN SELECT2
PATTERN
SELECT1
PATTERN
SELECT2
USER
CHAIN# DEC
OFF
OFF
KIT# INC
KIT# DEC
CHAIN# INC
CHAIN# DEC
PTN# INC
PTN# DEC
XSTICK SW
Turns off Pad Switch.
Calls up the next kit.
Calls up the previous kit.
Calls up the next drum kit chain.
Calls up the previous drum kit chain.
Calls up the next pattern.
Calls up the previous pattern.
Switches to use/not use cross stick.
PTN# DEC
AUX4
Head
Rim
OFF
KIT#
KIT#
INC
DEC
KIT# INC
CHAIN
CHAIN
# INC
# DEC
CHAIN# INC
PTN#
PTN#
INC
DEC
PTN# INC
Select from the table below.
3. Press [CURSOR (up/down)] to select the
parameter.
4. Use [+/-] or [VALUE] to make settings.
parameter
Dynamics
Velocity
Value
OFF,
ON
1–127
Master Effect Mode [F2 (COMP/EQ)]
You can specify which is used for the master effect (p. 43),
individual settings for each drum kit or common settings to all
kits.
1. Press [SETUP].
[SETUP] lights.
80
Description
OFF: No velocity. Level is fixed.
ON: Button responds to velocity.
Velocity when Dynamics is set to
“OFF.”
TD-20_Ref_e.book 81 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 10. Settings for the Entire TD-20 [SETUP]
2. Press [F4 (OPTION)] - [F2 (COMP/EQ)].
The “MASTER COMP/EQ MODE” screen appears.
fig.10-Master_70
1. Press [SETUP] - [F5 (F RESET)].
[SETUP] lights, and the “FACTORY RESET” screen
appears.
fig.10-Factory1_70
3. Use [+/-] or [VALUE] to make settings.
INDIVIDUAL: Master effect for each kit, individually.
GLOBAL:
Master effect common to other drum kits
is used.
2. Press [F5 (RESET)].
The confirmation screen appears.
fig.10-Factory2_70
When this is set to “GLOBAL,” “GLOBAL” appears on the
icon at the left part of the master effect setting screen.
fig.10-Master2_70
* To cancel, press [F1 (CANCEL)].
3. Press [F5 (EXECUTE)] to execute Factory
Reset.
When Factory Reset is finished, the following screen appears.
Adjusting the Display Contrast
[F5 (LCD)]
The display contrast is strongly influenced by the location of
the TD-20 and the lighting of the room it’s in. Adjust this
parameter when needed.
1. Press [SETUP].
[SETUP] lights.
2. Press [F4 (OPTION)] - [F5 (LCD)].
The “LCD CONTRAST” screen appears.
fig.10-Factory3_70
* If you do not want to adjust the VH Offset parameter, press [F1
(CANCEL)].
4. Press [F5 (ADJUST)].
The “VH OFFSET ADJUSTMENT” screen appears.
fig.05-VHOffset1_70
fig.10-Display_70
3. Use [+/-] or [VALUE] to adjust.
* You can also adjust it by holding [KIT] and turning [VALUE].
5. Loosen the clutch of the top hi-hat and let it sit
on the bottom hi-hat.
* Do NOT touch the hi-hats or the pedal.
Restoring the Factory
Settings [F5 (F RESET)]
Chapter 10
[SETUP]
6. Press [F5 (EXECUTE)].
The VH Offset parameter is set automatically.
fig.05-VHOffset2_70
This restores the TD-20 to the original factory settings
(Factory Reset).
When finished, the “DRUM KIT” screen appears.
All data and settings stored in the TD-20 are lost in
carrying out this operation. So if necessary, save your
data to a memory card or an external MIDI device before
executing the factory reset (p. 70, p. 77).
When Factory Reset is carried out, the [GROUP FADERS]
settings values are set to the maximum volume,
regardless of the slider positions.
81
TD-20_Ref_e.book 82 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 11. Drum Kit Chain [CHAIN]
Drum Kit Chain allows you to step through the drum kits of
your choice and in the order you want. The TD-20 lets you
create and store 16 different chains of up to 32 steps each.
8. Repeat steps 7 and 8 to create the drum kit
chain.
fig.11-ChainEdit2_70
fig.11-001e
32 steps
Chain 1
Kit
7
Kit
2
Kit
5
Kit
10
9. Press [EXIT].
Chain 2
The “DRUM KIT CHAIN” screen appears.
Function Buttons
Chain 16
[F1 (INSERT)]
A step with the same kit is inserted at the cursor position,
and steps after this point are moved back one place.
Creating a Drum Kit Chain
1. Press [CHAIN] to switch Drum Kit Chain on.
[CHAIN] lights, and the “DRUM KIT CHAIN” screen
appears.
fig.11-ChainEmpty_70
2. Press [F1 (EDIT)].
The “CHAIN EDIT” screen appears.
fig.11-ChainEdit1_70
3. Press [CURSOR (left)] to move the cursor to the
chain number.
4. Use [+/-] or [VALUE] to select the chain number.
5. Press [CURSOR (right)] to move the cursor to
the step (the order in which the drum kits will be
selected) in the right area of the display.
6. Press [CURSOR (up/down)] to select the step.
7. Use [+/-] or [VALUE] to select the drum kit.
82
[F2 (DELETE)]
Step at the cursor position is deleted, and steps after this
point are moved forward one place.
[F5 (NAME)]
You can name a drum kit chain.
TD-20_Ref_e.book 83 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 11. Drum Kit Chain [CHAIN]
Naming a Drum Kit Chain
[F5 (NAME)]
Each chain’s name can use up to 12 characters.
fig.11-ChainName_70
Playing with a Drum Kit
Chain
1. Press [CHAIN] to switch Drum Kit Chain on.
[CHAIN] lights.
fig.11-ChainPlay_70
1. Select the drum kit chain you want to name in
the “DRUM KIT CHAIN” screen.
2. Press [F1 (C EDIT)] - [F5 (NAME)].
The “CHAIN NAME” screen appears.
3. Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
4. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position, and
characters after this point are moved to the right one
space.
2. Press [CURSOR (up/down)] to select the chain
number to be used.
3. Use [+/-] or [VALUE] to call up the kits to be
used in each selected step in the chain.
4. When the performance is finished, press
[CHAIN] or [EXIT] to switch Drum Kit Chain off.
[CHAIN] goes off.
With the Foot Switch and Pad Switch functions, you can
use the foot switches and pads to call up drum kit chains.
For more details, refer to Using Foot Switches [F1
(FOOT SW)] (p. 79) and Using Pads as Switches [F2
(PAD SW)] (p. 80).
[F2 (DELETE)]
Character at the cursor position is deleted, and characters
after this point are moved to the left one space.
[F3 (SPACE)]
Character at the cursor position is replaced by a blank
space.
If differences in volume levels between kits is a problem,
press [MIXER] - [F4 (KIT VOL)] and adjust “Kit Volume”
(the overall kit volume).
[F4 (CHAR)]
Type of character at the cursor position changes between
upper case/lowercase alphabet, or numbers and
symbols.
Chapter 11
[CHAIN]
5. When you’re finished, press [EXIT] twice to
return to the “DRUM KIT CHAIN” screen.
83
TD-20_Ref_e.book 84 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 12. Other Functions [TOOLS]
Output Level Monitor
[F1 (MONITOR)]
1. Press [TOOLS] - [F1 (MONITOR)].
[TOOLS] lights, and the “OUTPUT MONITOR” screen
appears.
Synchronizing Images to a
TD-20 Performance
[F5 (V-LINK)]
What is V-LINK?
fig.12-Monitor_70
2. Use [+/-] or [VALUE] to select the output.
Choose from: Master, Phones, and separate stereo outs.
3. Press [EXIT] twice (or just press [KIT]) to return
to the “DRUM KIT” screen.
[TOOLS] goes off.
Checking the Current Status
[F2 (INFO)]
1. Press [TOOLS] - [F2 (INFO)].
2. Press [F1], [F2], or [F5] to display the status you
want to see.
[F1 (MEMORY)]: Information of the internal memory
V-LINK (
) is a function that allows music
and images to be performed together. By using MIDI to
connect two or more V-LINK compatible devices, you can
easily enjoy performing a wide range of visual effects that are
linked to the expressive elements of a music performance.
For example, by using the TD-20 and Edirol DV-7PR together,
you can use the pads connected to the TD-20 to switch the
Edirol DV-7PR’s images (clips/palettes).
* In order to use V-LINK with the TD-20 and Edirol DV-7PR,
you will need to make connections using an Edirol UM-1X/
UM-1SX (sold separately).
Connection Examples
* Before connecting this unit to other devices, turn off the power
to all units. This will help prevent malfunctions and/or damage
to speakers or other devices.
Use an Edirol UM-1X to connect the TD-20’s MIDI OUT
connector to the Edirol DV-7PR’s remote jack.
fig.V-LINKconnect.e
fig.12-Memory_70
Projector
Edirol DV-7PR
REMOTE
[F2 (CARD)]: Memory card information
fig.12-Card_70
Edirol UM-1X
Display
[F5 (VERSION)]: TD-20’s internal program version
fig.12-Version_70
MIDI OUT
3. Press [EXIT] twice (or just press [KIT]) to return
to the “DRUM KIT” screen.
84
TD-20
TD-20_Ref_e.book 85 ページ 2004年9月28日 火曜日 午前11時45分
Chapter 12. Other Functions [TOOLS]
Using V-LINK
Turning V-LINK On/Off
1. Press [TOOLS].
V-LINK function
Palette 1–20
Clip 1–28
Dissolve Time
[TOOLS] lights, and the “TOOLS” screen appears.
Selecting a palette
Selecting a clip
Changing the time
of the transition between clips
Transmitted
MIDI messages
Note On (*1)
Note On (*2)
Note On (*2)
(Velocity)
fig.12-Tools_70
*1
2. Press [F5 (V-LINK)] to turn the V-LINK function
ON and OFF.
fig.12-VLinkOn1_70
* Before turning V-LINK on, turn the Edirol DV-7PR’s power
on.
3. Press [KIT] or [EXIT] to display the “DRUM KIT”
screen.
When V-LINK is on, the V-LINK icon appears in the “DRUM
KIT” screen.
fig.12-VLinkOn2_70
* The V-LINK function will always be OFF when you turn the
TD-20’s power on.
V-LINK Functions that the TD-20 Can
Control and MIDI Messages
When playing a pattern by hitting a pad (Pad Pattern; p. 35),
you can assign the following functions to the note messages
recorded in the backing parts of the pattern to control the VLINK-compatible video equipment.
* The backing parts are the parts other than the drum part and
percussion part of the internal sequencer.
Palette No.
Palette 1
Palette 2
Palette 3
Palette 4
Palette 5
Palette 6
Palette 7
Palette 8
Palette 9
Palette 10
Palette 11
Palette 12
Palette 13
Palette 14
Palette 15
Palette 16
Palette 17
Palette 18
Palette 19
Palette 20
*2
Note No.
37 (C#2)
39 (D#2)
42 (F#2)
44 (G#2)
46 (A#2)
49 (C#3)
51 (D#3)
54 (F#3)
56 (G#3)
58 (A#3)
61 (C#4)
63 (D#4)
66 (F#4)
68 (G#4)
70 (A#4)
73 (C#5)
75 (D#5)
78 (F#5)
80 (G#5)
82 (A#5)
Clip No.
Clip 1
Clip 2
Clip 3
Clip 4
Clip 5
Clip 6
Clip 7
Clip 8
Clip 9
Clip 10
Clip 11
Clip 12
Clip 13
Clip 14
Clip 15
Clip 16
Clip 17
Clip 18
Clip 19
Clip 20
Clip 21
Clip 22
Clip 23
Clip 24
Clip 25
Clip 26
Clip 27
Clip 28
Note No.
36 (C2)
38 (D2)
40 (E2)
41 (F2)
43 (G2)
45 (A2)
47 (B2)
48 (C3)
50 (D3)
52 (E3)
53 (F3)
55 (G3)
57 (A3)
59 (B3)
60 (C4)
62 (D4)
64 (E4)
65 (F4)
67 (G4)
69 (A4)
71 (B4)
72 (C5)
74 (D5)
76 (E5)
77 (F5)
79 (G5)
81 (A5)
83 (B5)
* For details on clips/palettes, dissolve time, and retrigger point,
refer to the Edirol DV-7PR owner’s manual.
The TD-20 does not support the Edirol DV-7PR’s dual
stream mode.
* Set Play Type (p. 58) of the pattern to “V-LINK.”
Chapter 12
[TOOLS]
* The Performance data recorded in the backing part of the
sequencer is transmitted on V-LINK MIDI Ch (p. 75).
* Set V-LINK Device ID (p. 75) to match the device ID number
of the video equipment which is controlled by the TD-20.
85
TD-20_Ref_e.book 86 ページ 2004年9月28日 火曜日 午前11時45分
About Expansion Board
Expansion boards (optional) are cards that allow you to
upgrade the system and add new instruments and drum kits.
The bottom panel of the TD-20 has a slot that allows
expansion boards to be installed.
Install only the specified circuit board (SOUND & SYSTEM
EXPANSION BOARD for TD-20).
* Sound expansion boards for the Roland JV/XP/XV/Fantom
series cannot be used.
Cautions When Installing a
Expansion Board
How to Install a Expansion
Board
1. Always turn the TD-20 off and unplug the power
cord before attempting installation of the circuit
board (SOUND & SYSTEM EXPANSION BOARD
for TD-20).
2. Remove only the eight screws as indicated
below, and open the cover located on the
bottom of the TD-20.
fig.00-049ae
Removal screws
901
• To avoid the risk of damage to internal components that
can be caused by static electricity, please carefully observe
the following whenever you handle the board.
1
• Before you touch the board, always first grasp a metal
object (such as a water pipe), so you are sure that any
static electricity you might have been carrying has been
discharged.
2
• When handling the board, grasp it only by its edges.
Avoid touching any of the electronic components or
connectors.
5
• Save the bag in which the board was originally
shipped, and put the board back into it whenever you
need to store or transport it.
911
• Do not touch any of the printed circuit pathways or
connection terminals.
912
• Never use excessive force when installing a circuit board. If
it doesn’t fit properly on the first attempt, remove the
board and try again.
3. Check that the plastic board holders are
positioned as shown figure. Rotate them if
necessary.
fig.00-049be
Expansion board
913
• When circuit board installation is complete, double-check
your work.
914
• Always turn the unit off and unplug the power cord before
attempting installation of the circuit board (SOUND &
SYSTEM EXPANSION BOARD for TD-20).
915
• Install only the specified circuit board (SOUND & SYSTEM
EXPANSION BOARD for TD-20). Remove only the
specified screws.
86
Connector
Board holder
TD-20_Ref_e.book 87 ページ 2004年9月28日 火曜日 午前11時45分
About Expansion Board
4. While positioning the holes on the board over
the board holders, carefully insert the
connector on the board into the socket on the
TD-20. Make sure the connector is securely
connected, and that all three board holders
project through the holes.
5. Use the Installation Tool supplied with the
Expansion board to turn the holders in the
LOCK direction, so the board will be fastened in
place.
fig.00-049c
LOCK
(To remove the Expansion board, turn the board holders
in the UNLOCK direction, and lift up the board using the
provided tool. Remove the board and secure the cover
plate.)
Appendices
6. Secure the cover plate using the eight screws
removed in step 2.
87
TD-20_Ref_e.book 88 ページ 2004年9月28日 火曜日 午前11時45分
À propos des carte d’extension
(French language for Canadian Standard)
Les cartes d’extension (optionnelles) sont des cartes qui vous
permettent d’augmenter la puissance de votre système et
d’ajouter de nouveaux instruments ainsi que des batteries.
Le panneau du dessous du TD-20 a un créneau permettant
l’installation des cartes d’extension.
N’installez que la ou les carte de circuits imprimés spécifiée.
(SOUND & SYSTEM EXPANSION BOARD pour TD-20)
* Les cartes d’extension de son pour les séries JV/XP/XV/Fantom
de Roland ne peuvent être utilisées.
Précautions à prendre lors
de l’installation d’une carte
d’extension
Installation d’une carte
d’extension
1. Éteignez toujours le TD-20 et débranchez le
câble électrique avant toute tentative
d’installation de carte de circuits imprimés
(SOUND & SYSTEM EXPANSION BOARD pour
TD-20).
2. Enlevez seulement les huit vis et ouvrez la
plaque située sous le TD-20.
fig.00-049af
Vis
901 (F)
• Veuillez suivre attentivement les instructions suivantes
quand vous manipulez la carte afin d’éviter tout risque
d’endommagement des pièces internes par l’électricité
statique.
1
• Toujours toucher un objet métallique relié à la terre
(comme un tuyau par exemple) avant de manipuler la
carte pour vous décharger de l’électricité statique que
vous auriez pu accumuler.
2
• Lorsque vous manipulez la carte, la tenir par les côtés.
Évitez de toucher aux composants ou aux connecteurs.
5
• Conservez le sachet d’origine dans lequel était la carte
lors de l’envoi et remettez la carte dedans si vous devez
la ranger ou la transporter.
911(F)
• Ne pas toucher aux circuits imprimés ou aux connecteurs.
912(F)
• Ne jamais forcer lors de l’installation de la carte de circuits
imprimés. Si la carte s’ajuste mal au premier essai, enlevez
la carte et recommencez l’installation.
3. Veillez à ce que les supports en plastique pour
la carte soient positionnés tel qu’indiqué.
Faites-les pivoter si nécessaire.
fig.00-049bf
Carte d’extension
913(F)
• Quand l’installation de la carte de circuits imprimés est
terminée, revérifiez si tout est bien installé.
914(F)
• Toujours éteindre et débrancher l’appareil avant de
commencer l’installation de la carte. (SOUND & SYSTEM
EXPANSION BOARD pour TD-20).
915(F)
• N’installez que les cartes de circuits imprimes spécifiées
(SOUND & SYSTEM EXPANSION BOARD pour TD-20).
Enlevez seulement les vis indiquées.
88
Prise
Support pour la carte
TD-20_Ref_e.book 89 ページ 2004年9月28日 火曜日 午前11時45分
À propos des carte d’extension
4. Pendant que vous alignez les trous de la carte
au-dessus des supports, insérez délicatement
le connecteur sur la carte dans la prise du TD20. Assurez-vous que le connecteur est
raccordé correctement et que les trois supports
s’emboîtent bien dans les trous.
5. Pour tourner les supports en position LOCK
(verrouillé), utilisez l’outil d’installation de la
carte d’extension fournie à cet effet. De cette
façon, la carte sera bien fixée à sa place.
fig.00-049c
LOCK
(Pour enlever la carte d’extension, faites tourner les
supports dans la direction UNLOCK (déverrouillé) et
soulevez la carte en utilisant l’outil à cet effet. Retirez la
carte et remettez la plaque .)
Appendices
6. Refermez la plaque en utilisant les huit vis
enlevées à l’étape 2.
89
TD-20_Ref_e.book 90 ページ 2004年9月28日 火曜日 午前11時45分
Messages and Error Messages
This section lists the messages (error messages) that the TD-20 produces and explains the meaning of each
message, giving you the appropriate action to take.
fig.Message_70
When an indication of “ACCEPT” is shown above [F5] as in the
figure, pressing that button will close the message window.
Error Messages
Message
Backup Battery Low!
Backup NG!
MIDI Communication Error!
System Error!
Measure Maximum!
Step Maximum!
Data Overload!
Not Enough Memory!
No Card!
No Space!
No Data!
Unsupported!
Unformatted!
Card Damaged!
BULK DUMP
Checksum Error!
90
Meaning
The internal backup battery of the TD-20 (a
battery that maintains data in the user memory) has run down.
Data in the TD-20’s memory may be corrupted. The TD-20’s internal backup battery (the
battery used for saving User memory data) is
fully drained; internal data has been lost.
It is possible that the power has been turned
off for the MIDI device connected to the TD20’s MIDI IN connector.
A problem has occurred with the internal
system.
The maximum number of measures that can
be recorded to one pattern has been exceeded; no further recording or editing that adds
measures can be carried out.
The maximum number of steps that can be
recorded to one chain has been exceeded; no
further editing that adds steps can be carried
out.
Pattern contained an excessive amount of data, and as a result could not be output successfully from MIDI OUT.
Pattern recording or editing could not be carried out because there was not enough internal memory.
No card is in the memory card slot.
There are no empty space on the memory
card.
No data you request on the memory card.
A card the size of which is not supported by
TD-20 has been inserted.
A card the format of which is not supported
by TD-20 has been inserted.
The data stored on the card has been corrupted.
The checksum value of a system exclusive
message was incorrect.
Action
Contact your dealer or a nearby Roland service
center to have the battery replaced.
Contact your dealer or a nearby Roland service
center to have the battery replaced. Follow the
messages appearing on the screen to carry out
Factory Reset (p. 81); you will then be able to
use the unit temporarily.
Check the power of the connected MIDI device.
Contact your dealer or a nearby Roland service
center.
Delete unneeded measures from the pattern
being recorded or edited (p. 66).
Delete unneeded steps from the chain being
edited (p. 82).
Try eliminating a part that has too much data.
Try deleting patterns that are no longer needed
(p. 66).
Insert a memory card.
Delete unneeded data (p. 72).
–
Cards supported by TD-20 are 3.3 V CompactFlash cards with the capacity of 16 to 512 MB.
Check the card.
Format the card (p. 72).
Format the card (p. 72).
Correct the checksum value.
TD-20_Ref_e.book 91 ページ 2004年9月28日 火曜日 午前11時45分
Messages and Error Messages
Message
BULK DUMP
Receive Address Error!
BULK DUMP
Receive Data Error!
Meaning
The receive address of a system exclusive
message was incorrect.
A MIDI message was received incorrectly.
BULK DUMP
Receive Time Out!
The interval in receiving system exclusive
messages were too long.
Action
Correct the receive address.
If the same error message is displayed repeatedly, there is a problem with the MIDI messages that are being transmitted to the TD-20.
Make the interval of the data shorter.
Messages
No Empty Pattern!
MIDI Offline!
MIDI Buffer Full!
No Empty Backup!
No Empty
Backup Pattern!
Power On Too Long.
Please Turn Off!
Auto Shutdown Completed.
Please Turn Off!
Meaning
Bulk data is now being received.
Action
–
Bulk data transmission was halted.
–
You cannot record on the preset pattern.
This pattern contains no performance data; it
cannot be edited.
There are no empty patterns for recording.
A MIDI cable was disconnected. (Or communication with the external MIDI device
stopped for some reason.)
A large amount of MIDI messages were received in a short time, and could not be processed completely.
Copy the pattern onto a user pattern.
Select the other pattern that contains performance data.
Delete unneeded pattern (p. 66).
Make sure that MIDI cables have not been
pulled out or broken.
There are no empty backup area on the memory card.
There are no empty backup pattern on the
memory card.
The power remains ON for a long time.
Confirm that the external MIDI device is properly connected. If the problem persists, reduce
the amount of MIDI messages sent to the TD20.
Delete unneeded backup (p. 72).
Delete unneeded backup pattern (p. 68).
Turn the TD-20’s power off, then turn on
again.
Appendices
Message
BULK DUMP
Receiving... Please Wait.
BULK DUMP
Aborted!
Preset Pattern!
Empty Pattern!
91
TD-20_Ref_e.book 92 ページ 2004年9月28日 火曜日 午前11時45分
Drum Instrument List
No.
Name
Remark
KICK
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
92
Cartoon
Chicken
Jive
RB
Layered
Lazy
HardLow
Alley
DaFloor
Croak
Plastic
Trip
Gokigen
FX-Wah
Lo-Fi
Name
Remark
KICK ELEC
22”Birch
22”Solid
22”StdMple
22”Maple
24”Carbon
22”CbnMple
22”GT
22”TitanHp
22”Mahogny
20”Lite
22”RoseWd
22”Oak
Recording1
Recording2
Universal
BigOpen
JazzCombo1
JazzCombo2
Cannon
Roto
Booth
K
Ballad K
Swing
K
Heavy
K
Can
K
Fusion K
Latin
K
Meat
K
Pillow K
DryMed K
Dry
K
Solid
K
Reso
K
Raw
K
Vintage K
OldMple K
Hard
K
BigLow K
Hybrid K
Gabba1 K
Gabba2 K
Gabba3 K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
KICK PROCESSED
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
No.
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
58
59
60
61
62
63
64
65
66
67
68
69
70
Cosmic K
Hi-Q
K
Analog1 K
Analog2 K
Analog3 K
ClascElec1
ClascElec2
ClascElec3
ClascElec4
ClascElec5
ClascElec6
TR808 Kick
TR909 Kick
Name
Remark
SNARE BRUSH
109
110
111
112
K
K
K
K
K
K
RoundBdge S
RoundBdge SR
CoolyMple S
CoolyMple SR
70’sMetal S
70’sMetal SR
WoodBrass S
WoodBrass SR
13”Hole
S
13”Hole
SR
Aluminum S
Aluminum SR
Titanium S
Titanium SR
Skanky
S
Skanky
SR
30’sMaple S
30’sMaple SR
BrassPico S
BrassPico SR
Booth
S
Booth
SR
Studio S
Studio SR
Ballad S
Ballad SR
Swing
S
Swing
SR
Street S
Lite
S
LA Fat S
Ring
S
Whack
S
Impulse S
Cruddy1 S
Cruddy2 S
HotRod S
HotRod SR
Brush1
Brush1
Brush2
Brush2
S
SR
S
SR
*BRUSH
*BRUSH
SNARE PROCESSED
SNARE
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
No.
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*I
*I
*I
*I
*I
*I
*P
*I
*P
*P
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*I
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
*I
*X
*I *X
*I *X
*X
*X
*X
*X
*X
*X
*X
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
Basis
S
Chunk
S
ClapTailS
ClubDry S
Dump
S
HopRim1 S
HopRim2 S
HopRim3 S
LzrGate S
Pick
S
Planet S
RB
S
2Step
S
Lo-Fi
S
Round XStik
Cooly XStik
70’s
XStik
WoodBr XStik
13”
XStik
Alumi XStik
Titan XStik
Skanky XStik
30’s
XStik
Reggae XStik
Ballad XStik
Studio XStik
Swing XStik
Hard
XStik
Maple XStik
SNARE ELEC
142
143
144
145
146
147
148
149
150
ClascElec1 S
ClascElec2 S
ClascElec3 S
ClascElec4 S
ClascElec5 S
TR808 Snare
TR808 SnrRim
TR909 Snare
TR909 SnrRim
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
*X
TD-20_Ref_e.book 93 ページ 2004年9月28日 火曜日 午前11時45分
Drum Instrument List
Name
Remark
TOM
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
12”Birch
12”Birch
13”Birch
13”Birch
16”Birch
16”Birch
18”Birch
18”Birch
12”GT
12”GT
13”GT
13”GT
16”GT
16”GT
18”GT
18”GT
10”Univ
10”Univ
12”Univ
12”Univ
14”Univ
14”Univ
16”Univ
16”Univ
12”Clasc
12”Clasc
13”Clasc
13”Clasc
16”Clasc
16”Clasc
18”Clasc
18”Clasc
12”Fiber
12”Fiber
14”Fiber
14”Fiber
16”Fiber
16”Fiber
18”Fiber
18”Fiber
12”Maple
12”Maple
14”Maple
14”Maple
16”Maple
16”Maple
18”Maple
18”Maple
12”Oak
12”Oak
14”Oak
14”Oak
16”Oak
16”Oak
18”Oak
18”Oak
T1
T1R
T2
T2R
T3
T3R
T4
T4R
T1
T1R
T2
T2R
T3
T3R
T4
T4R
T1
T1R
T2
T2R
T3
T3R
T4
T4R
T1
T1R
T2
T2R
T3
T3R
T4
T4R
T1
T1R
T2
T2R
T3
T3R
T4
T4R
T1
T1R
T2
T2R
T3
T3R
T4
T4R
T1
T1R
T2
T2R
T3
T3R
T4
T4R
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
*P
No.
Name
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
8”Roto T1
8”Roto T1R
10”Roto T2
10”Roto T2R
12”Roto T3
12”Roto T3R
14”Roto T4
14”Roto T4R
16”Roto T5
16”Roto T6
18”Roto T7
18”Roto T8
18”RotoExLo1
18”RotoExLo2
Ballad T1
Ballad T2
Ballad T3
Ballad T4
Swing
T1
Swing
T2
Swing
T3
Swing
T4
Pop1
T1
Pop1
T2
Pop1
T3
Pop1
T4
Pop2
T1
Pop2
T2
Pop2
T3
Pop2
T4
Round
T1
Round
T2
Round
T3
Round
T4
80’sDry T1
80’sDry T2
80’sDry T3
80’sDry T4
90’sBig T1
90’sBig T2
90’sBig T3
90’sBig T4
90’sPower T1
90’sPower T2
90’sPower T3
90’sPower T4
OctaTom C Hi
OctaTom B
OctaTom A
OctaTom G
OctaTom F
OctaTom E
OctaTom D
OctaTom C
Mallet T1
Mallet T2
Mallet T3
Mallet T4
Brush T1
Brush T2
Brush T3
Brush T4
Remark
No.
Name
Remark
TOM ELEC
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
ClscElec1
ClscElec1
ClscElec1
ClscElec1
ClscElec2
ClscElec2
ClscElec2
ClscElec2
ClscElec3
ClscElec3
ClscElec3
ClscElec3
ClscElec4
ClscElec4
ClscElec4
ClscElec4
TR808 T1
TR808 T2
TR808 T3
TR808 T4
TR909 T1
TR909 T2
TR909 T3
TR909 T4
T1
T2
T3
T4
T1
T2
T3
T4
T1
T2
T3
T4
T1
T2
T3
T4
HI-HAT
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
14”P-HatHH
14”P-HatHHEg
13”Hatz HH
13”Hatz HHEg
14”Hatz HH
14”Hatz HHEg
14”Dark HH
14”Dark HHEg
14”Edge HH
14”Edge HHEg
TriangleHH
HandCym HH
Brush HH
CR78 HH
TR808 HH
TR909 HH
Tekno HH
Elec HH
CRASH
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
16”DarK CrBw
16”DarK CrEg
16”Thin CrBw
16”Thin CrEg
16”PaperCrBw
16”PaperCrEg
16”FsPwrCrBw
16”FsPwrCrEg
18”PowerCrBw
18”PowerCrEg
18”Med CrBw
18”Med CrEg
19”NY
CrBw
19”NY
CrEg
18”Fast CrBw
18”Fast CrEg
18”Fast CrBl
Brush
Cr
Brush
CrEg
Mallet Cr
*I
*I
*I
*I
*I
*I
*I
Appendices
No.
*I
*I
*I
93
TD-20_Ref_e.book 94 ページ 2004年9月28日 火曜日 午前11時45分
Drum Instrument List
No.
Name
Remark
SPLASH
331
332
333
334
335
336
337
338
339
340
6”SplazhSpBw
6”SplazhSpEg
8”Thin SpBw
8”Thin SpEg
8”Bell SpBw
8”Bell SpEg
8”Open SpBw
8”Open SpEg
10”Med SpBw
10”Med SpEg
12”PgyBack
12”PgyBackEg
16”Swish
16”Swish Eg
18”CB Low
18”CB Low Eg
20”U-China
China PgBack
Crash PgBack
*I
*I
*I
*I
*I
*I
RIDE
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
94
18”PRideRd
18”PRideRdBl
18”PRideRdEg
18”Bop Rd
18”Bop RdBl
18”Bop RdEg
20”HeavyRd
20”HeavyRdBl
20”HeavyRdEg
20”Med Rd
20”Med RdBl
20”Med RdEg
20”TurkyRd
20”TurkyRdBl
20”TurkyRdEg
19”NY
Rd
19”NY
RdBl
19”NY
RdEg
20”Lite Rd
20”Lite RdBl
20”Lite RdEg
22”CleanRd
22”CleanRdBl
22”CleanRdEg
18”FormuRd
18”FormuRdBl
18”FormuRdEg
20”Bell Rd
20”Bell RdBl
20”Bell RdEg
Brush
Rd
Brush
RdEg
Mallet1 Rd
Mallet2 Rd
Name
PERCUSSION
CHINA
341
342
343
344
345
346
347
348
349
No.
*P
*I
*P
*I
*P
*I
*P
*I
*P
*I
*P
*I
*P
*I
*P
*I
*P
*I
*P
*I
*I
*I
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
Bongo Hi
Bongo HiSlap
Bongo Lo
Bongo LoSlap
Conga Hi
Conga HiMute
Conga HiSlap
Conga Lo
Conga LoMute
Cajon Bass
Cajon Mute
Cajon Slap
Cowbell Hi
Cowbell Lo
Cowbell Mute
CowbellMambo
Claves
SquareBlock
Block Hi
Block Lo
Maracas
Caxixi
Shaker
Tambourine1
Tambourine2
Tambourine3
Guiro Long
Guiro Short
Timbale Hi
Timbale HiRm
Timbale Lo
TimbalePaila
Agogo Hi
Agogo Lo
Cabasa
Cuica Hi
Cuica Lo
Cuica Acc
Pandeiro
PandeiroMute
PandeiroSlap
Surdo Hi
Surdo HiMute
Surdo Lo
Surdo LoMute
Whistle
WhistleShort
VibraSlap
Tabla Na
Tabla Te
Tabla Ti
Tabla Tin
Tabla Tun
Baya Ge
Baya Gin
Baya Ka
Baya Slide
PotDrum
PotDrum Acc
PotDrum Mute
Djembe Tone
Djembe Slap
Djembe Bass
TalkingDr
TalkingDr Up
Castanet
WoodBlock
Remark
No.
Name
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
Timpani C
Timpani G
ConcertBD
ConcertBD Mt
HandCymbal
HandCymbalMt
Triangle
TriangleCls
Triangle2
Triangle2Cls
Crotale
BellTree
SleighBell
TreeChimes
ThaiGong
TinyGong
Gong
OrchestraHit
SnareRoll
ConcertSnare
SteelDrum
Celesta
Glockenspiel
Kalimba
Marimba
TubularBell
Vibraphone
Xylophone
PERC ANALOG
479
480
481
482
483
484
485
486
487
488
489
CR78Cowbell
CR78Guiro
CR78Maracas
CR78MtlBeat
CR78Tamb
TR808Clap
TR808Claves
TR808Cowbell
TR808Maracas
TR808XStick
TR909Clap
SFX
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
Hi-Q
Poa
Pyon
Picoon
Byon
Kyun
Psyun
Boom
SuperLow
TimeWarp1
TimeWarp2
Transform1
Transform2
Tramsform3
Tekno FX1
Tekno FX2
Tekno FX3
Ring FX
Drop Out
LaserGun
Spiral
Emergency
Wonderer
Remark
TD-20_Ref_e.book 95 ページ 2004年9月28日 火曜日 午前11時45分
Drum Instrument List
Name
Remark
About Remarks
OTHER
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
Click
Beep
Sticks
Sticks2
MetroBell
MetroClick
FingerSnaps
Clap
R8Slap
Motor
Engine
Glass
Burt
Boing1
Boing2
Bounce
VerbyHit
AfroStomp
Bomb!
TuningTom
ReverseCrash
ReverseChina
PhaseCrash
PhaseRide
Scratch1
Scratch2
Scratch3
Scratch4
TapeStop
TapeRewind
Voice OK
Voice Yeah
Vocoder1
Vocoder2
TeknoHit
PhillyHit
FunkHit
Bass Gliss
Guitar Gliss
GuitarScrtch
CutGt Down
CutGt Up
WahGt1 Down
WahGt1 Up
WahGt2 Down
WahGt2 Up
Sine 440Hz
For PadCheck
Off
*P (Position):
Can get various changes of the sound in
accordance with the positioning where
on the pad you hit with a stick. In rim
sounds, can get such various changes of
the sound in accordance with the depth
of the stick on the rim.
*I (Interval):
Can make the sound so smooth in
accordance with a roll or continuous
strokes with sticks.
*X (XStick):
When the Cross Stick Switch is turned
ON, it makes possible to use both “Rim
Shot” and “Cross Stick” on the rim.
*BRUSH:
Can be played using “Brush Sweep.”
About Snare/Tom
Instruments
The last letter of each instrument name
means the sound of head shot, or rim
shot.
(Example)
S:
head sound of Snare
SR:
rim sound of Snare
T1:
head sound of Tom 1
T1R: rim sound of Tom 1
About Cymbal
Instruments
The last letter of each instrument name
means the sound of bow shot, edge shot,
or bell shot.
Copyright
When you purchase the TD-20
percussion sound module from an
authorized Roland dealer, the
included sounds are licensed, not
sold, to you by Roland Corporation,
for commercial use in music
production, public performance,
broadcast, etc.
You may use any of the included
sounds in a commercial or noncommercial recording without
paying any additional license fees.
However, you must strictly adhere
to the following crediting guidelines
on any music recording that utilize
material from TD-20.
Reproduction or duplication of any
of the sound contained in the TD-20,
either as they exist on this sound
module or by any means of
reformatting, mixing, filtering, resynthesizing, processing or
otherwise editing for use in another
product or for re-sale, is strictly
prohibited without the express
written consent of Roland. All
unauthorized giving, trading,
lending, renting, re-issue, redistribution or re-sale of the sounds
included in the TD-20 are expressly
prohibited.
In Plain English: Be creative in your
application of the TD-20 sounds, and
keep this sounds for your use only.
DO NOT COPY IT.
(Example)
HH:
bow sound of hi-hat
HHEg: edge sound of hi-hat
CrBw: bow sound of crash
CrEg: edge sound of crash
Rd:
bow sound of ride
RdBl: bell sound of ride
RdEg: edge sound of ride
Appendices
No.
* Special thanks to Spectrasonics.
95
TD-20_Ref_e.book 96 ページ 2004年9月28日 火曜日 午前11時45分
Note Number (Factory Settings)
Percussion Set
Drum Kit
1. Latin Toys
Drum Kit 1–50
(Trigger Inputs)
Bass Gliss
GuitarScrtch
WahGt1 Down
WahGt1 Up
WahGt2 Down
WahGt2 Up
CR78Guiro
CR78Tamb
TR808Clap
TR808Cowbell
TR808Maracas
TR909Clap
Hi-Q
R8Slap
Scratch2
Scratch3
Sticks
Click
MetroClick
MetroBell
Clap
VibraSlap
SquareBlock
Off
Beep
Crotale
SquareBlock
6"SplazhSpEg
6"SplazhSpBw
Guiro Short
Guiro Long
Cuica Hi
Cuica Lo
Cowbell Hi
Cowbell Lo
Cowbell Lo
Cowbell Mute
Tambourine1
Tambourine2
Conga LoMute
Tambourine1
Conga Lo
Claves
Conga Hi
Claves
Bongo Lo
Claves
Bongo LoSlap
Bongo Hi
Triangle
Bongo HiSlap
SleighBell
Agogo Lo
BellTree
Tambourine1
TriangleCls
Cowbell Mute
Agogo Hi
Conga HiSlap
TreeChimes
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
(7) Closed HH Rim
(for_BrushSweep) (p. 36)
–
(11) Ride-Edge
(7) Open HH Rim
(12) AUX1
(12) AUX1 Rim
(13) AUX2
(13) AUX2 Rim
(14) AUX3
(14) AUX3 Rim
(15) AUX4
(15) AUX4 Rim
(1) Kick Rim
(1) Kick
(for_X-Stick) (p. 36)
(2) Snare
(6) Tom4 Rim
(2) Snare Rim
(6) Tom4
(7) Closed HH
(5) Tom3
(7) Pedal HH
(4) Tom2
(7) Open HH
(4) Tom2 Rim
(3) Tom1
(8) Crash1
(3) Tom1 Rim
(10) Ride
(9) Crash2 Rim
(10) Ride Rim
–
(8) Crash1 Rim
–
(9) Crash2
(5) Tom3 Rim
(11) Ride-Edge Rim
Note No.
C-1 0
1
2
3
4
5
6
7
8
9
10
11
C0 12
13
14
15
16
17
18
19
20
21
22
23
C1 24
25
26
27
28
29
30
31
32
33
34
35
C2 36
37
38
39
40
41
42
43
44
45
46
47
C3 48
49
50
51
52
53
54
55
56
57
58
59
96
TD-20_Ref_e.book 97 ページ 2004年9月28日 火曜日 午前11時45分
Note Number (Factory Settings)
Note No.
61
62
63
64
65
66
67
68
69
70
71
C5 72
73
74
75
76
77
78
79
80
81
82
83
C6 84
85
86
87
88
89
90
91
92
93
94
95
C7 96
97
98
99
100
101
102
103
104
105
106
107
C8 108
109
110
111
112
113
114
115
116
117
118
119
C9 120
121
122
123
124
125
126
127
Bongo Hi
Bongo Lo
Conga Hi
Conga HiSlap
Conga Lo
Timbale Hi
Timbale Lo
Agogo Hi
Agogo Lo
Cabasa
Maracas
WhistleShort
Whistle
Guiro Short
Guiro Long
Claves
Block Hi
Block Lo
Cuica Hi
Cuica Lo
TriangleCls
Triangle
Shaker
SleighBell
BellTree
Castanet
Surdo LoMute
Surdo Lo
Bongo HiSlap
Bongo LoSlap
Conga HiMute
Conga LoMute
PandeiroMute
Pandeiro
PandeiroSlap
TreeChimes
Crotale
Gong
Cajon Bass
Cajon Mute
Cajon Slap
CowbellMambo
SquareBlock
Caxixi
Timbale HiRm
TimbalePaila
Cuica Acc
Surdo Hi
Surdo HiMute
PotDrum
PotDrum Acc
PotDrum Mute
Djembe Tone
Djembe Slap
Djembe Bass
TalkingDr
TalkingDr Up
Tabla Na
Tabla Te
Tabla Ti
Tabla Tun
Baya Ge
Baya Gin
Baya Ka
Baya Slide
ConcertBD
HandCymbal
Off
Appendices
C4 60
• Up to eight percussion sets can be stored.
• You can change the used instruments in each percussion set.
For details, refer to Percussion Set Settings (p. 55).
97
TD-20_Ref_e.book 98 ページ 2004年9月28日 火曜日 午前11時45分
Backing Instrument List
PC
CC0 Name
VOICES
PIANO
1
19
0
ORGAN 3
2
20
0
8
16
CHURCH ORG.1
CHURCH ORG.2
CHURCH ORG.3
1
2
2
21
0
REED ORGAN
1
22
0
8
ACCORDION FR
ACCORDION IT
2
2
23
0
HARMONICA
1
0
BANDONEON
2
0
8
16
PIANO 1
PIANO 1W
PIANO 1D
1
2
1
0
8
PIANO 2
PIANO 2W
1
2
3
0
8
PIANO 3
PIANO 3W
1
2
24
4
0
8
HONKY-TONK
HONKY-TONK W
2
2
GUITAR
2
E. PIANO
5
6
0
8
24
64
65
0
64
E.PIANO 1
DETUNED EP 1
60’S E.PIANO
FM+SA EP
HARD RHODES
E.PIANO 2
BRIGHT FM EP
1
2
1
2
2
2
2
25
0
NYLON-STR.GT
1
26
0
8
64
STEEL-STR.GT
12-STR.GT
NYLON+STEEL
1
2
2
27
0
8
JAZZ GT.
HAWAIIAN GT.
28
0
8
29
8
0
8
16
24
HARPSICHORD
COUPLED HPS.
HARPSI.W
HARPSI.O
1
2
2
2
0
64
CLAV.
FUNK CLAV.
1
2
39
0
1
8
64
65
66
SYNTH BASS 1
SYNTHBASS101
SYNTH BASS 3
TB33 BS 1
TB33 BS 2
TB33 BS 3
1
1
1
1
1
1
40
0
16
64
65
66
67
SYNTH BASS 2
RUBBER BASS
SH101 BS 1
SH101 BS 2
SH101 BS 3
MODULAR BASS
2
2
1
1
1
2
ORCHESTRA
41
0
8
VIOLIN
SLOW VIOLIN
1
1
1
1
42
0
VIOLA
1
43
0
CELLO
1
CLEAN GT.
CHORUS GT.
1
2
44
0
CONTRABASS
1
0
64
65
66
67
MUTED GT.
MUTED GT.2
POP GT.
FUNK GT.
FUNK GT.2
1
2
1
1
1
45
0
TREMOLO STR
1
46
0
PIZZICATOSTR
1
47
0
HARP
1
48
0
TIMPANI
1
30
0
64
OVERDRIVE GT
FDBK.ODRV.GT
1
2
STRINGS
31
0
8
64
65
66
67
DISTORTIONGT
FEEDBACK GT.
HEAVY GT.
FDBK. HVY.GT
MUTED DIS.GT
ROCK RHYTHM
1
2
1
2
1
2
49
0
8
STRINGS
ORCHESTRA
1
2
50
0
SLOW STRINGS
1
51
0
8
GT.HARMONICS
GT. FEEDBACK
1
1
0
8
64
65
SYN.STRINGS1
SYN.STRINGS3
SYN.STRINGS4
OB STRINGS
1
2
2
2
CLAVI
7
SYN. BASS
CHROMATIC PERCUSSION
*
*
9
0
CELESTA
1
10
0
GLOCKENSPIEL
1
11
0
MUSIC BOX
1
52
0
SYN.STRINGS2
2
12
0
8
VIBRAPHONE
VIB.W
1
2
*: VELOCITY SWITCH
The tone switches at velocity 116.
53
0
32
CHOIR AAHS
CHOIR AAHS 2
1
1
54
0
VOICE OOHS
1
55
0
SYNVOX
1
56
0
ORCHESTRAHIT
2
32
13
0
MARIMBA
1
BASS
14
0
XYLOPHONE
1
33
15
0
8
9
TUBULAR-BELL
CHURCH BELL
CARILLON
1
1
1
0
SANTUR
1
16
35
ORGAN
17
18
98
34
0
8
16
32
64
65
ORGAN 1
DETUNED OR.1
60’S ORGAN 1
ORGAN 4
SC88 ORGAN 4
EVEN BAR
1
2
1
2
1
2
0
8
32
ORGAN 2
DETUNED OR.2
ORGAN 5
1
2
2
36
37
38
0
64
ACOUSTIC BS.
ELCTRC.AC.BS
2
2
0
64
65
FINGERED BS.
FUNK BASS
REGGAE BASS
1
2
2
0
64
65
PICKED BS.
MUTE PICKBS1
MUTE PICKBS2
1
1
1
0
FRETLESS BS.
BRASS
57
0
TRUMPET
1
58
0
1
TROMBONE
TROMBONE 2
1
2
1
59
0
TUBA
1
60
0
MUTEDTRUMPET
1
61
0
1
FRENCH HORN
FR.HORN 2
2
2
62
0
8
BRASS 1
BRASS 2
1
2
0
64
65
66
SLAP
SLAP
RESO
SLAP
BASS 1
BASS 3
SLAP
BASS 4
1
1
1
1
0
SLAP BASS 2
1
TD-20_Ref_e.book 99 ページ 2004年9月28日 火曜日 午前11時45分
Backing Instrument List
63
64
64
65
0
8
16
64
65
66
67
SYNTH BRASS1
SYNTH BRASS3
ANALOGBRASS1
SYNTH BRASS5
POLY BRASS
QUACK BRASS
OCTAVE BRASS
2
2
2
2
2
2
2
0
8
16
64
65
66
SYNTH BRASS2
SYNTH BRASS4
ANALOGBRASS2
SOFT BRASS
VELO BRASS 1
VELO BRASS 2
2
1
2
2
2
2
BIG & RAW
FAT & PERKY
2
2
SYN. PAD
89
0
FANTASIA
2
90
0
64
65
WARM PAD
THICK PAD
HORN PAD
1
2
2
91
0
64
POLYSYNTH
80’S POLYSYN
2
2
92
0
SPACE VOICE
1
93
0
BOWED GLASS
2
94
0
64
METAL PAD
PANNER PAD
2
2
REED
65
0
SOPRANO SAX
1
95
0
HALO PAD
2
66
0
ALTO SAX
1
96
0
64
65
SWEEP PAD
POLAR PAD
CONVERGE
1
1
1
67
0
TENOR SAX
1
68
0
BARITONE SAX
1
69
0
OBOE
1
70
0
ENGLISH HORN
1
71
0
BASSOON
1
72
0
CLARINET
1
73
0
PICCOLO
0
ICE RAIN
2
98
0
64
65
SOUNDTRACK
ANCESTRAL
PROLOGUE
2
2
2
99
0
1
CRYSTAL
SYN MALLET
2
1
1
100
0
ATMOSPHERE
2
74
0
FLUTE
1
101
0
BRIGHTNESS
2
75
0
RECORDER
1
102
0
GOBLIN
2
76
0
PAN FLUTE
1
103
77
0
BOTTLE BLOW
2
0
1
2
64
65
66
ECHO DROPS
ECHO BELL
ECHO PAN
ECHO PAN 2
BIG PANNER
RESO PANNER
1
2
2
2
2
2
0
STAR THEME
2
78
0
SHAKUHACHI
2
79
0
WHISTLE
1
80
0
OCARINA
1
SYN. LEAD
104
ETHNIC MISC
81
0
1
8
SQUARE WAVE
SQUARE
SINE WAVE
2
1
1
82
0
1
8
64
65
SAW WAVE
SAW
DOCTOR SOLO
BIG LEAD
WASPY SYNTH
83
0
84
0
105
0
1
SITAR
SITAR 2
1
2
2
1
2
2
2
106
0
BANJO
1
107
0
SHAMISEN
1
108
0
8
KOTO
TAISHO KOTO
1
2
SYN.CALLIOPE
2
109
0
KALIMBA
1
CHIFFER LEAD
2
110
0
BAGPIPE
1
0
FIDDLE
1
112
0
SHANAI
1
0
64
65
66
CHARANG
DIST. LEAD 1
DIST. LEAD 2
FUNK LEAD
2
2
2
2
111
86
0
SOLO VOX
2
113
0
TINKLE BELL
1
87
0
64
5TH SAW WAVE
BIG FIVES
2
2
114
0
AGOGO
1
115
0
STEEL DRUMS
1
85
88
0
BASS & LEAD
2
0
8
WOODBLOCK
CASTANETS
1
1
117
0
8
TAIKO
CONCERT BD
1
1
118
0
8
MELO. TOM 1
MELO. TOM 2
1
1
119
0
8
9
SYNTH DRUM
808 TOM
ELEC PERC.
1
1
1
120
0
REVERSE CYM.
1
GUITAR BASS FX
121
0
1
64
65
66
67
GT.FRETNOISE
GT.CUT NOISE
WAH BRUSH GT
GT. SLIDE
GT. SCRATCH
BASS SLIDE
1
1
1
1
1
1
122
0
1
BREATH NOISE
FL.KEY CLICK
1
1
123
0
1
2
3
5
SEASHORE
RAIN
THUNDER
WIND
BUBBLE
1
1
1
1
2
124
0
1
3
BIRD
DOG
BIRD 2
2
1
1
125
0
1
3
5
TELEPHONE 1
TELEPHONE 2
DOOR
WIND CHIMES
1
1
1
2
126
0
2
9
64
HELICOPTER
CAR-STOP
BURST NOISE
SPACE TRI.
1
1
2
1
127
0
3
APPLAUSE
PUNCH
2
1
128
0
2
3
GUN SHOT
LASERGUN
EXPLOSION
1
1
2
SFX
SYN. SFX
97
PIPE
116
PERCUSSIVE
PC:
Program number
(Instrument number)
CC0:
Value of control
change number 0
VOICES: Number of voices used
* To switch instruments from the
external MIDI device, send “0” on the
CC32# (Control Change Bank Select)
from the external MIDI device to the
TD-20.
* The value of the CC32# (Control
Change Bank Select) that the TD-20
transmits is always “0.”
99
Appendices
SYN. BRASS
TD-20_Ref_e.book 100 ページ 2004年9月28日 火曜日 午前11時45分
MIDI Implementation Chart
Date : Jan. 25, 2004
PERCUSSION SOUND MODULE (SOUND GENERATOR SECTION)
MIDI Implementation Chart
Model TD-20
Transmitted
Function...
Recognized
Basic
Channel
Default
Changed
1–16, OFF
1–16, OFF
1–16, OFF
1–16, OFF
Mode
Default
Messages
Altered
Mode 3
X
Mode 3
X
**************
**************
0–127
**************
0–127
0–127
Note
Number : True Voice
Version : 1.00
Remarks
Memorized
Velocity
Note On
Note Off
O 9nH, v = 1–127
O 8nH, v = 64
O
O
After
Touch
Key’s
Channel’s
O
X
O
X
*3
O
*4
O
O
O
O
O
O
O
O
O
O
O
O
O
*4
*1 *2 *3
*1 *2 *3
*1 *2 *3
*4
*4
*1 *2 *3
*1 *2 *3
*4
*4
*4
*4
Bank Select
Modulation
Breath Controller
Foot Controller
Data Entry
Volume
Panpot
Expression
General Purpose Controller 1–4
Hold 1
Effects 1 (Reverb Send Level)
Effects 3 (Chorus Send Level)
RPN LSB, MSB
O 0–127
0–127
*5
Program No. 1–128
**************
System Exclusive
O
O
: Song Position
System
: Song Select
Common
: Tune Request
X
X
X
X
X
X
: Clock
System
Real Time : Commands
X
X
O
X
X
Pitch Bend
0, 32
1
2
4
6, 38
7
10
11
16–19
64
91
93
100, 101
Control
Change
Program
Change
*3
O
O
O
O
X
X
X
O
O
X
X
X
X
(Pad, Pedal) *1 *2 *3
(Pad, Pedal) *1 *2 *3
(Pad, Pedal) *1 *2 *3
(Pad, Pedal) *1 *2 *3
(Pad, Pedal) *1 *2 *3
O 0–127
: True Number
*5
X
: All Sound Off
: Reset All Controllers X
Aux
X
: Local On/Off
Messages : All Notes Off
X
O
: Active Sensing
X
: System Reset
Notes
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
100
*4
O (120, 126, 127)
O
X
O (123–127)
O
X
*1 One is selected as the strike position.
*2 One is selected as the hi-hat control pedal.
*3 Drum part only.
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
*4 Backing part only.
*5 O X is selectable.
O : Yes
X : No
TD-20_Ref_e.book 101 ページ 2004年9月28日 火曜日 午前11時45分
Date : Jan. 25, 2004
PERCUSSION SOUND MODULE (SEQUENCER SECTION)
MIDI Implementation Chart
Model TD-20
Transmitted
Function...
Recognized
Basic
Channel
Default
Changed
1–16, OFF
1–16, OFF
1–16, OFF
1–16, OFF
Mode
Default
Messages
Altered
Mode 3
X
Mode 3
X
**************
**************
0–127
**************
0–127
0–127
Remarks
Memorized
Velocity
Note On
Note Off
O 9nH, v = 1–127
O 8nH, v = 64
O
O
After
Touch
Key’s
Channel’s
O
X
*3
O
X
*3
O
*4
O
*4
O
O
O
O
O
O
O
O
O
O
O
O
O
*6 *7
*1 *2 *3
*1 *2 *3
*1 *2 *3
*4 *6 *7
*6 *7 *10
*4 *6 *7
*1 *2 *3
*1 *2 *3
*4
*4 *6 *7
*4 *6 *7
*4 *6 *7
X
O
O
O
X
X
X
O
O
O
X
X
X
O 0–127
*5 *6 *7
X
Program No. 1–128
Only reception/transmission
of Bulk Data.
Pitch Bend
0, 32
1
2
4
6, 38
7
10
11
16–19
64
91
93
100, 101
Control
Change
Program
Change
: True Number
O
O
: Song Position
System
: Song Select
Common
: Tune Request
X
X
X
X
X
X
: Clock
System
Real Time : Commands
O
O
O
O
X
: All Sound Off
: Reset All Controllers X
Aux
X
: Local On/Off
Messages : All Notes Off
X
X
: Active Sensing
X
: System Reset
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
*1 *2 *3
*1 *2 *3
*4
Bank Select
Modulation
Breath Controller
Foot Controller
Data Entry
Volume
Panpot
Expression
General Purpose Controller 1–4
Hold 1
Effects 1 (Reverb Send Level)
Effects 3 (Chorus Send Level)
RPN LSB, MSB
**************
System Exclusive
Notes
*1 *2 *3
*1 *2 *3
*1 *2 *3
*1
*2
*3
*4
*5
*6
O
O
X
O (123–127)
X
X
One is selected as the strike position.
One is selected as the hi-hat control pedal.
Drum part only.
Backing part only.
O X is selectable.
Transmits when pattern is selected.
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
*8
*9
*7 Transmits when modified.
*8 Receives when Sync Mode setting is “EXTERNAL” or “AUTO.”
*9 Receives when Sync Mode setting is “EXTERNAL,” “AUTO,”
or “REMOTE.”
*10 Except drum part.
O : Yes
X : No
101
Appendices
Note
Number : True Voice
Version : 1.00
TD-20_Ref_e.book 102 ページ 2004年9月28日 火曜日 午前11時45分
Specifications
TD-20: Percussion Sound Module
Ambience Parameters
Room Type, Room Size, Wall Type, Mic Position, Room Shape
Sound Generator
Variable Drum Modeling
Mixer Parameters
Volume, Pan, Minimum Volume, Output Assign
Maximum Polyphony
64 Voices
Effect Types
Pad Equalizer (each pad)
Instruments
Pad Compressor (each pad)
Drum Instruments: 560
Multi-Effects: 14 types
Backing Instruments: 262
Master Compressor
Master Equalizer
Drum Kits
50
Drum Kit Chains
16 chains (32 steps per chain)
Instrument Parameters
V-EDIT (KICK):
Shell Depth, Beater Type, Head Type, Head Tuning, Muffling,
Snare Buzz, Mic Position
Reverb (for backing part)
Chorus (for backing part)
Percussion Sets
8
Sequencer
User Patterns: 100
Preset Patterns: 100
Parts: 6
Play Type: Oneshot, Loop, Tap
V-EDIT (SNARE):
Tempo: 20–260
Shell Material, Shell Depth, Head Type, Head Tuning,
Muffling, Strainer Adjustment, Mic Position
Resolution: 192 ticks per quarter note
V-EDIT (TOM):
Shell Depth, Head Type, Head Tuning, Muffling, Snare Buzz,
Mic Position
V-EDIT (HI-HAT):
Cymbal Size, Add Tambourine, Mic Position, Fixed Hi-Hat
V-EDIT (CYMBAL):
Recording Method: Realtime
Maximum Note Storage: approx. 20,000 Notes
Click Instruments: 20
Display
64 x 240 dots (backlit graphic LCD)
7 segments, 3 characters (LED)
Trigger Level Indicator (LED)
Cymbal Size, Sizzle Type, Sustain, Mic Position
EDIT:
Pitch, Decay
Faders
8
Preview Button
102
TD-20_Ref_e.book 103 ページ 2004年9月28日 火曜日 午前11時45分
Specifications
Connectors
Options
Trigger Input Jack x 15
Hi-Hat Control Jack (VH-12, FD-7, FD-8)
Pads (PD-7, PD-8, PD-9, PD-80, PD-80R, PD-105BK,
PD-125BK)
Master Output Jacks (L/MONO, R)
Cymbals (CY-8, CY-12H, CY-12R/C, CY-14C, CY-15R)
Direct Output Jack x 8
Kick Triggers (KD-7, KD-8, KD-80, KD-120BK)
Digital Output Jack (COAXIAL)
Hi-Hat (VH-12)
Headphones Jack (Stereo 1/4 inch phone type)
Hi-Hat Control Pedal (FD-8)
Mix in Jack (Stereo 1/4 inch phone type)
Stands (MDS-20)
MIDI Connectors (IN, OUT/THRU)
Cymbal Mount (MDY-10U)
Foot Switch Jack (1/4 inch TRS phone type)
Pad Mount (MDH-10U)
CompactFlash Card Slot
AC Inlet
Output Impedance
1.0 k ohms
Power Supply
AC 117 V, AC 230 V, AC 240 V (50/60 Hz)
AC 220 V (60 Hz)
Power Consumption
984
* A separate publication titled “MIDI Implementation” is also
available. It provides complete details concerning the way
MIDI has been implemented on this unit. If you should require
this publication (such as when you intend to carry out bytelevel programming), please contact the nearest Roland Service
Center or authorized Roland distributor.
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
16 W
Dimensions
307 (W) x 256 (D) x 105 (H) mm
12-1/8 (W) x 10-1/8 (D) x 4-3/16 (H) inches
Weight
2.9 kg / 6 lbs 7 oz
Accessories
Owner’s Manual
Appendices
Power Cord
103
TD-20_Ref_e.book 104 ページ 2004年9月28日 火曜日 午前11時45分
Rim
Head
2 SNARE
3 TOM1
:
6 TOM4
Rim
Head
Rim
Head
7 HI-HAT
Rim
Head
8 CRASH1
Rim
Head
9 CRASH2
Rim
Head
10 RIDE
11 EDGE
Rim
Head
12 AUX1
Rim
Head
13 AUX2
Rim
Head
14 AUX3
Rim
Head
15 AUX4
Rim
MIXER
/VOLUME
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
MIXER
/KIT VOL
AMBIENCE
AMB Send
KICK
AMB Send
AMB Send
SNARE
AMB Send
AMB Send
TOMS
AMB Send
AMB Send
HI-HAT
CRASH 1
CRASH 2
AMB Send
AMB Send
AMB Send
Drums
Head
1 KICK
COMP/
EQ
Kit Volume
INST
AMB Send
AMB Send
AMB Send
RIDE
AMB Send
AMB Send
AUX1
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
INST
COMP/EQ
Volume
AMB Send
AMB Send
(AUX)
Drums
AUX2
AMB Send
AMB Send
AUX3
AMB Send
AMB Send
AUX4
INST
COMP/EQ
Volume
AMB Send
Block Diagram
MIDI CC#7
(Volume)
Percussion Set
AMBIENCE
TYPE
ROOM
PATTERN/PART
/PERC/EDIT/EDIT
INST
Volume
Backing Part
Volume
MELODY
INST
Volume
BASS
INST
Volume
BACK 1
INST
Volume
INST
Volume
BACK 2
PERC
Volume
REV Send
Volume
REV Send
Volume
REV Send
Volume
REV Send
Volume
REV Send
PATTERN
/PART
/MIXER
/VOLUME
PATTERN
/PART
/BACKING
BACKING
PERC
GROUP
FADERS
PART
REVERB
Type
Time
TEMPO/CLICK/INST
Click
INST
AMB Send
CLICK
CLICK
([SHIFT] + [TEMPO])
switch with
[FADER]
TD-20 Block Diagram
104
TD-20_Ref_e.book 105 ページ 2004年9月28日 火曜日 午前11時45分
MULTI
EFFECTS
MIXER
/PAN
SETUP
/OUTPUT
/MASTER
MFX Send
MASTER
COMP/EQ
MFX Send
MFX Send
Hi
MFX Send
Md
MFX Send
MFX Send
Lo
MFX Send
MFX Send
MFX Send
SETUP
/OUTPUT
/DIRECT
MFX Send
DIGITAL
OUT
MFX Send
MFX Send
L/MONO
MFX Send
MFX Send
MASTER
MASTER
R
MFX Send
MFX Send
SETUP
/OUTPUT
/OTHER
MFX Send
DIRECT 1
MFX Send
MFX Send
DIRECT 2
MFX Send
MFX Send
DIRECT 3
MFX Send
DIRECT 4
MULTI
EFFECTS
(MFX)
DIRECT 5 (L)
DIRECT 6 (R)
PAN
CHO Send
DIRECT 7 (L)
DIRECT 8 (R)
PAN
CHO Send
CHO Send
CHO Send
CHO Send
PHONES
PHONES
Appendices
PAN
MASTER (L)
MASTER (R)
DIRECT 1
DIRECT 2
DIRECT 3
DIRECT 4
DIRECT 5 (L)
DIRECT 6 (R)
DIRECT 7 (L)
DIRECT 8 (R)
Type
Rate
Depth
MASTER OUT (L)
MASTER OUT (R)
PHONES (L)
PHONES (R)
PART
CHORUS
MIX IN
MIX IN
105
TD-20_Ref_e.book 106 ページ 2004年9月28日 火曜日 午前11時45分
Index
Symbols
+/- .................................................................. 14, 23
Numerics
3-WAY ................................................................. 48
A
Acoustic Drum Kit .............................................
Add Tambourine ...............................................
ADVANCE .........................................................
AMB SEND LEVEL ...........................................
Amb Send Level .................................................
APPEND .............................................................
32
33
48
37
60
65
B
Backing Instrument ........................................... 98
Backing Part ........................................................ 57
BANK .................................................................. 44
BASIC .................................................................. 45
Beater Type ......................................................... 33
Bell Shot ............................................................... 27
Bend Range ......................................................... 54
Block Diagram .................................................. 104
Bow Shot ....................................................... 26–27
BR MIDI .............................................................. 36
BRUSH ................................................................. 29
Brush .................................................................... 36
Brush Note No. .................................................. 36
Brush Switch ....................................................... 29
BULK ................................................................... 77
Bulk Dump ......................................................... 77
C
CARD ................................................ 14, 67, 70, 84
Card ..................................................................... 16
CC Max ................................................................ 46
CC Resolution .................................................... 46
CHAIN .................................................... 13, 82–83
Channel ............................................................... 74
CHAR ................................................ 30, 59, 71, 83
CHINA ................................................................ 34
Choke ................................................................... 27
CHORUS ............................................................. 57
Click ................................................... 25, 59–60, 78
Click Instruments ............................................... 60
COMP .................................................................. 80
CompactFlash ............................................... 16, 70
106
Connection .............................................. 18–19, 84
CONTROL .................................................... 35, 79
COPY ....................................................... 13, 64, 69
COUNT ............................................................... 60
Count In Play ..................................................... 60
Count In Rec ....................................................... 60
CRASH ................................................................ 34
Cross Stick .............................................. 26, 30, 36
crosstalk .............................................................. 47
CTRL .................................................................... 76
CURSOR ............................................................. 14
Cursor .................................................................. 23
Curve ................................................................... 45
CY-15R/14C ....................................................... 27
Cymbal .......................................................... 27, 34
D
Decay Time ......................................................... 34
DELETE ..................... 30, 59, 66, 68, 71–72, 82–83
Demo Song ......................................................... 22
Depth ................................................................... 57
Device ID ............................................................ 75
DIGITAL OUT ................................................... 15
DIRECT OUT ..................................................... 15
Display ................................................................ 13
Display Contrast .......................................... 25, 81
Drum Instrument ............................................... 92
DRUM KIT .......................................................... 14
Drum Kit ....................................................... 28, 30
Drum Kit Chain ........................................... 82–83
During Play ........................................................ 60
During Rec .......................................................... 60
Dynamics ............................................................ 80
E
Edge Shot ...................................................... 26–27
EDIT ......................................................... 32, 56, 64
Edit ....................................................................... 32
EDIT LOCK ........................................................ 31
Effect .................................................................... 57
EQ ........................................................................ 80
ERASE ................................................................. 65
Error Message .................................................... 90
EXCHNG ............................................................ 69
EXIT ..................................................................... 14
Expansion Board ................................................ 86
TD-20_Ref_e.book 107 ページ 2004年9月28日 火曜日 午前11時45分
Index
F
F RESET ............................................................... 81
Factory Reset ...................................................... 81
FADER ........................................................... 24, 37
FIXED .................................................................. 33
Fixed Hi-Hat ....................................................... 33
Foot Splash Sens ................................................. 46
FOOT SW ............................................................ 79
FOOT SWITCH .................................................. 15
Foot Switch ......................................................... 79
FORMAT ............................................................. 72
FUNC ................................................................... 29
Function Button ................................................. 23
G
Gate ...................................................................... 36
Gate Time ............................................................ 36
GLOBAL .............................................................. 74
GROUP FADERS ................................... 14, 24, 37
H
H & R ................................................. 31, 37–38, 40
HEAD .................................................................. 33
Head Shot ............................................................ 26
Head Tuning ....................................................... 33
Head Type .......................................................... 33
Headphones ........................................................ 19
HH MIDI ............................................................. 36
HH Note# Border ............................................... 76
HI-HAT ............................................................... 33
Hi-Hat ................................................ 21, 26, 35–36
Hi-Hat Ctrl Type ................................................ 46
Hit Pad Start ....................................................... 63
I
INFO .............................................................. 73, 84
INSERT ........................................ 30, 59, 71, 82–83
INST ..................................................................... 31
Inst ................................................................. 54, 60
Instrument
Drum .............................................................. 31
Instrument Name ......................................... 32, 55
Instrument Number .......................................... 55
Interval ................................................................ 60
K
Key Shift .............................................................. 54
KICK .................................................................... 33
KIT ................................................................. 14, 28
Kit Parameters .................................................... 29
Kit Tempo ........................................................... 29
KIT VOL .............................................................. 37
Kit Volume ................................................... 29, 37
L
LCD ...................................................................... 81
LED Display ....................................................... 13
LIST .......................................................... 28, 32, 56
LOAD ............................................................ 68, 71
Local Control ...................................................... 75
LOCK ................................................................... 31
LOOP ............................................................. 58, 63
M
Mask Time .......................................................... 49
MASTER ............................................................. 14
Master Effect ....................................................... 80
MASTER OUT .................................................... 15
Master Tuning .................................................... 55
Material ............................................................... 33
MEMORY ........................................................... 84
Memory Card ................................... 67–68, 70–73
Mesh Head .......................................................... 21
Message ............................................................... 91
Metronome ................................................... 25, 59
MFX SEND LEVEL ............................................ 37
MIC ...................................................................... 33
Mic Position ........................................................ 33
MIDI ...................................................... 36, 74, 100
MIDI CH ............................................................. 74
MIDI Channel .................................................... 62
MIDI IN ............................................................... 15
MIDI OUT/THRU ............................................. 15
MIN VOL ............................................................ 37
Minimum Volume ............................................. 37
MIX EDIT ............................................................ 37
MIX IN .............................................. 14–15, 19, 78
MIXER ........................................................... 37, 57
MONITOR .................................................... 29, 84
MOUNT TYPE ................................................... 47
MUFFLE .............................................................. 33
Muffling .............................................................. 33
N
NAME ................................... 30, 56, 59, 71, 82–83
Noise Cancel ....................................................... 46
Note No. .............................................................. 36
Note Number ............................................... 36, 96
O
Offset ....................................................... 21, 46–47
107
TD-20_Ref_e.book 108 ページ 2004年9月28日 火曜日 午前11時45分
Index
ONESHOT .......................................................... 58
Open Rim Shot ................................................... 26
OPTION .............................................................. 80
Other Instruments ............................................. 34
OUTPUT ............................................................. 78
Output ................................................................. 60
Output Destination ............................................ 78
Output Level ................................................ 29, 84
P
Pad ........................................................... 18, 21, 26
Pad Pattern ......................................................... 35
Pad Ptn Velocity ................................................. 35
PAD SW .............................................................. 80
Pad Type ............................................................. 44
Pan ................................................................. 37, 60
PART .................................................................... 54
Part ....................................................................... 57
PART CHORUS SEND LEVEL ........................ 57
PART PAN .......................................................... 57
PART REVERB SEND LEVEL ......................... 57
PART VOLUME ................................................. 57
Pattern ..................................................... 25, 52, 64
PATTERN EDIT ................................................. 64
Pattern Length .............................................. 58, 62
PD-125/105 ................................................... 21, 26
PDLBEND ........................................................... 35
Pedal .................................................................... 18
Pedal Bend Range .............................................. 35
Pedal CC .............................................................. 76
Pedal HH Volume ....................................... 29, 37
PERC .................................................................... 55
Percussion Instrument ................................ 55–56
Percussion Part ................................................... 55
Percussion Set ............................................... 55–56
PHONES ....................................................... 14, 16
Pitch ..................................................................... 34
Play Type ............................................................ 58
Playback Method ............................................... 58
Playing Method .................................................. 26
Position Ctrl ........................................................ 36
Positional Sensing .............................................. 27
POWER ............................................................... 15
Power ................................................................... 20
Preset Drum Kit ................................................. 25
Preset Pattern ..................................................... 51
Pressure ............................................................... 26
PREVIEW ................................................ 14, 24, 55
PROG ................................................................... 76
Program Change ................................................ 76
108
Q
Quantize .............................................................. 63
Quick Play .......................................................... 58
R
Rate ...................................................................... 57
Realtime Recording ........................................... 61
REC ...................................................................... 61
Rec Mode ............................................................ 63
Recording ...................................................... 61–63
Recording Method ............................................. 63
Rehearsal ............................................................. 63
REPLACE ............................................................ 63
Retrig Cancel ...................................................... 48
Retrigger Cancel ................................................ 48
REV/CHO .......................................................... 57
REVERB .............................................................. 57
RIDE .................................................................... 34
Ride CC ............................................................... 76
RIM ................................................................ 24, 48
Rim Gain ............................................................. 49
Rim Shot .............................................................. 26
RimShot Adjust .................................................. 49
S
SAVE ............................................................. 67, 70
SCAN ................................................................... 48
Scan Time ............................................................ 48
Sensitivity ........................................................... 45
SEQUENCER ..................................................... 14
Sequencer ...................................................... 51, 61
SETUP ..................................................... 14, 58, 74
Shallow Rim Shot .............................................. 26
SHELL ................................................................. 33
Shell Depth ......................................................... 33
SHIFT .................................................................. 14
Size ................................................................. 33–34
Sizzle Type .......................................................... 34
SNARE ................................................................ 33
Snare Buzz .......................................................... 33
Snare CC ............................................................. 76
Soft Thru ............................................................. 74
SPACE ............................................... 30, 59, 71, 83
SPLASH .............................................................. 34
Stand .................................................................... 17
stand holder ........................................................ 17
step ....................................................................... 82
Strainer Adj. ....................................................... 33
Sustain ................................................................. 34
Sync Mode .......................................................... 53
TD-20_Ref_e.book 109 ページ 2004年9月28日 火曜日 午前11時45分
Index
T
TAMB .................................................................. 33
TAP ................................................................ 58–59
Tap Ptn Mute Grp .............................................. 35
Tap Reset Time ............................................. 58–59
TEMPO ................................................................ 29
Tempo ................................................ 25, 53, 58, 62
Tension ................................................................ 21
Threshold ............................................................ 45
Time ..................................................................... 57
Time Signature ....................................... 58, 60, 62
TIMESIG .............................................................. 60
TOM ..................................................................... 33
Toms CC .............................................................. 76
TOOLS ........................................................... 13, 84
TRIG SELECT ............................................... 14, 24
TRIGGER ...................................................... 14, 44
Trigger Bank ....................................................... 44
TRIGGER INPUT ............................................... 15
Trigger Level Indicator ..................................... 13
Trigger Select ...................................................... 31
Trigger Type ....................................................... 44
Tuning ................................................................. 55
Tx Channel .......................................................... 36
Tx/Rx .................................................................. 74
U
User Pattern ........................................................ 51
V
VALUE .......................................................... 14, 23
Variation .............................................................. 55
V-EDIT ................................................................. 32
Velocity ................................................................ 80
Velocity Curve .................................................... 45
VERSION ............................................................ 84
VH-12 ....................................................... 21, 26, 47
V-LINK .............................................. 58–59, 84–85
V-LINK Device ID ............................................. 75
V-LINK MIDI Ch ............................................... 75
VOLUME ............................................................ 29
Volume ................................................................ 37
X
XSTICK ................................................................ 30
XStick Note No. .................................................. 36
XStick Thrshld .................................................... 49
XStick Volume .............................................. 29, 37
XTALK ................................................................. 47
XTALK CANCEL ............................................... 47
XTALK GROUP ................................................. 47
109
TD-20_Ref_e.book 110 ページ 2004年9月28日 火曜日 午前11時45分
Preset Drum Kit List
No. Name
1
2
3
4
5
6
7
8
9
10
VPro
Slamin’
METAL
JazzCombo
OverDrive
Titanium
RotoKit
UNIVERSE
Skanky
Brushes
No. Name
*1
*1
*2
11
12
13
14
15
16
17
18
19
20
No. Name
Spark!
>>GT>>
Antique
=BreakBeats=
Studio
Groover
*1
Mallet
Drumline
JazzGig
*1
Airtime
21
22
23
24
25
26
27
28
29
30
No. Name
Sploink!
Boogaloo
Zeppy
Arena
Maple
Shallow
Ballad
Raspy
PopReggae
BrassBiggie
*1
*1
31
32
33
34
35
36
37
38
39
40
No. Name
WetBooth
70s Record
Lite
Mellow
Stadium
TiteOctas
90s Power
FxJungle
Tekno
TR-808
*1
*1
*1
41
42
43
44
45
46
47
48
49
50
TR-909
Hex< >Drum
Cosmosis
Technology
OrchPerc
Survivor
Latin Toys
African Perc
Tabla/Sitar
UserKit
*1
*1
*1
*3
*1: A Pattern is assigned to CRASH 2. (Pad Pattern; p. 35)
*2: Brushes can be used.
*3: Parameters including volume etc. are set to standard
values. Use this when creating a kit from scratch.
Preset Pattern List
No. Name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Drums POP
Drums JAZZ
Drums BALLAD
Drums H.ROCK
Rockin’ Hard
Night Groove
Fast Track
Water Fall
Smooth Sail
Bug Juice
Strunk
Faced
4 & 7
Swing A
Swing B
Latin 4 bars
Latin 8 bars
Rockin’
Rollin’
Shufflin’
Minoplis
Grr-unge
Rockmay
Shoot!
Jammin’
Clap Happy
Happy R&B
Holiday
Cruisin’
Festival
Let’s Roll
Woa
Pop X
Purplroq
Pop’n Love
In the House
Smoove
Shuffle Bop
110
T.S Len Tempo
4/4
4/4
12/8
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
15/8
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
6/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
10
13
9
9
18
4
4
4
4
4
4
4
4
16
8
4
8
16
24
26
4
4
8
4
8
8
8
8
4
4
8
8
8
4
4
4
2
4
120
180
100
152
95
88
105
80
89
74
82
67
115
212
212
130
130
100
128
140
118
111
100
89
113
104
104
111
110
164
148
114
124
112
140
100
94
92
No. Name
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
Funky Alley
Old Soul
Brown Funk
Thick Funk
Up Shuffle
R&B Shuffle
Shuffle Grv
R&B Groove
Smooth Grv
Slow Fusion
Country Blld
6/8 Ballad
Slow
Reggae
Rastamon
Salsa 1
Salsa 2
Songo
Latin Jazz
Afro Jazz
Smooth Jazz
Modern Jazz
Blues12bar A
Blues12bar B
Surfpunk
Rockabilly
Funk Hop
Funk 5/4A
Funk 4/4B
King Strut
Krunkn’
Start & Stop
Prowl
Guttn’
Ambient
Rockin’A8bar
Rockin’B8bar
Shufflin’Itr
T.S Len Tempo
No. Name
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
6/8
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
5/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
8
8
18
12
26
16
17
12
19
15
8
21
4
8
4
17
20
16
26
22
20
28
12
12
4
24
4
2
4
4
4
4
4
4
8
8
8
8
90
114
132
102
130
112
96
80
73
85
102
50
69
122
86
115
102
109
167
194
183
136
55
55
130
192
102
86
86
84
94
112
80
68
96
100
100
140
Shufflin’A8
Shufflin’B10
4 & 7 A 2bar
4 & 7 B 2bar
Samba
Sitar Rag
Aco Bass
BrassSection
Jazz End
OrchString1
OrchString2
OrchString3
StrChord
DiscoTapBass
TrashBass
Applause
Sweep Pad 1
Sweep Pad 2
Grv Bass
Strings
Pad&Bass
Synchord1
7 Notes
12 Notes
T.S Len Tempo
4/4
4/4
15/8
15/8
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
4/4
T.S: Time Signature
Len: Pattern Length
Play Type: 1–80: LOOP
81–98: TAP
99, 100: V-LINK
(See p. 58.)
8
10
2
2
1
17
4
5
6
8
8
8
8
1
1
4
8
8
2
8
8
3
7
12
140
140
115
115
120
100
160
160
60
128
128
128
150
120
120
120
80
80
120
128
80
120
128
128
To resize thickness, move all items on the front cover
and registration marks to left or right.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
For EU Countries
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
8.
9.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
For the U.K.
WARNING:
THIS APPARATUS MUST BE EARTHED
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Danger of explosion if battery is
incorrectly replaced.
Replace only with the same or
equivalent type recommended by the
manufacturer.
Discard used batteries according to the
manufacturer’s instructions.
Apparatus containing
Lithium batteries
ADVARSEL!
VARNING
Lithiumbatteri - Eksplosionsfare ved
fejlagtig håndtering.
Udskiftning må kun ske med batteri af
samme fabrikat og type.
Levér det brugte batteri tilbage til
leverandøren.
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en
ekvivalent typ som rekommenderas av
apparattillverkaren.
Kassera använt batteri enligt
fabrikantens instruktion.
ADVARSEL
VAROITUS
Eksplosjonsfare ved feilaktig skifte av
batteri.
Benytt samme batteritype eller en
tilsvarende type anbefalt av
apparatfabrikanten.
Brukte batterier kasseres i henhold til
fabrikantens instruks joner.
Paristo voi räjähtää, jos se on
virheellisesti asennettu.
Vaihda paristo ainoastaan
laitevalmistajan suosittelemaan
tyyppiin. Hävitä käytetty paristo
valmistajan ohjeiden mukaisesti.
For EU Countries
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
2
To resize thickness, move all items on the front cover
and registration marks to left or right.
Information
AFRICA
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany
Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
REUNION
SOUTH AFRICA
That Other Music Shop(PTY)Ltd.
11 Melle St., Braamfontein,
Johannesbourg,
SOUTH AFRICA
TEL: (011) 403 4105
FAX: (011) 403 1234
Paul Bothner(PTY)Ltd.
17 Werdmuller Centre,
Main Road, Claremont 7708
SOUTH AFRICA
TEL: (021) 674 4030
PHILIPPINES
COSTA RICA
TRINIDAD
ITALY
ISRAEL
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
TEL: (02) 899 9801
JUAN Bansbach Instrumentos
Musicales
Ave.1. Calle 11, Apartado 10237,
San Jose, COSTA RICA
TEL: 258-0211
AMR Ltd
Ground Floor
Maritime Plaza
Barataria Trinidad W.I.
TEL: (868)638 6385
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
Halilit P. Greenspoon & Sons
Ltd.
8 Retzif Ha'aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
SINGAPORE
CURACAO
URUGUAY
Swee Lee Company
150 Sims Drive,
SINGAPORE 387381
TEL: 6846-3676
Zeelandia Music Center Inc.
Orionweg 30
Curacao, Netherland Antilles
TEL:(305)5926866
CRISTOFORI MUSIC PTE LTD
Blk 3014, Bedok Industrial Park E,
#02-2148, SINGAPORE 489980
TEL: 6243-9555
DOMINICAN REPUBLIC
Todo Musica S.A.
Francisco Acuna de Figueroa
1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
TAIWAN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung
Shan N.Road Sec.2, Taipei,
TAIWAN, R.O.C.
TEL: (02) 2561 3339
THAILAND
Theera Music Co. , Ltd.
330 Verng NakornKasem, Soi 2,
Bangkok 10100, THAILAND
TEL: (02) 2248821
VIETNAM
ASIA
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Saigon Music
Suite DP-8
40 Ba Huyen Thanh Quan Street
Hochiminh City, VIETNAM
TEL: (08) 930-1969
AUSTRALIA/
NEW ZEALAND
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 Anhuaxili
Chaoyang District, Beijing
100011 CHINA
TEL: (010) 6426-5050
AUSTRALIA/
NEW ZEALAND
Roland Corporation
Australia Pty.,Ltd.
Roland Shanghai Electronics
Co.,Ltd.
(GUANGZHOU OFFICE)
2/F., No.30 Si You Nan Er Jie
Yi Xiang, Wu Yang Xin Cheng,
Guangzhou 510600, CHINA
TEL: (020) 8736-0428
For Australia
Tel: (02) 9982 8266
For New Zealand
Tel: (09) 3098 715
HONG KONG
Tom Lee Music Co., Ltd.
Service Division
22-32 Pun Shan Street, Tsuen
Wan, New Territories,
HONG KONG
TEL: 2415 0911
Parsons Music Ltd.
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
INDIA
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra
Mahalaxmi Flats Compound
Off. Dr. Edwin Moses Road,
Mumbai-400011, INDIA
TEL: (022) 2493 9051
INDONESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
KOREA
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
MALAYSIA
BENTLEY MUSIC SDN BHD
140 & 142, Jalan Bukit Bintang
55100 Kuala
Lumpur,MALAYSIA
TEL: (03) 2144-3333
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
CENTRAL/LATIN
AMERICA
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
BARBADOS
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, Barbados
TEL: (246)430-1100
BRAZIL
Roland Brasil Ltda
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
COLOMBIA
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, Colombia
TEL: (574)3812529
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Santo Domingo,
Dominican Republic
TEL:(809) 683 0305
ECUADOR
Mas Musika
Rumichaca 822 y Zaruma
Guayaquil - Ecuador
TEL:(593-4)2302364
EL SALVADOR
OMNI MUSIC
75 Avenida Norte y Final
Alameda Juan Pablo II,
Edificio No.4010 San Salvador,
EL SALVADOR
TEL: 262-0788
GUATEMALA
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala
Guatemala
TEL:(502) 599-2888
HONDURAS
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
3 Ave.11 Calle S.O
San Pedro Sula, Honduras
TEL: (504) 553-2029
MARTINIQUE
Musique & Son
Z.I.Les Mangle
97232 Le Lamantin
Martinique F.W.I.
TEL: 596 596 426860
Gigamusic SARL
10 Rte De La Folie
97200 Fort De France
Martinique F.W.I.
TEL: 596 596 715222
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico
D.F. MEXICO
TEL: (55) 5668-6699
NICARAGUA
Bansbach Instrumentos
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, Nicaragua
TEL: (505)277-2557
PANAMA
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City, REP. DE
PANAMA
TEL: 315-0101
PARAGUAY
Distribuidora De
Instrumentos Musicales
J.E. Olear y ESQ. Manduvira
Asuncion PARAGUAY
TEL: (595) 21 492147
PERU
Audionet
Distribuciones Musicales SAC
Juan Fanning 530
Miraflores
Lima - Peru
TEL: (511) 4461388
VENEZUELA
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar
import
#7 zona Industrial de Turumo
Caracas, Venezuela
TEL: (212) 244-1122
EUROPE
AUSTRIA
NORWAY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: 2273 0074
POLAND
JORDAN
AMMAN Trading Agency
245 Prince Mohammad St.,
Amman 1118, JORDAN
TEL: (06) 464-1200
KUWAIT
MX MUSIC SP.Z.O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
EASA HUSAIN AL-YOUSIFI
& SONS CO.
Abdullah Salem Street,
Safat, KUWAIT
TEL: 243-6399
PORTUGAL
LEBANON
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: 22 608 00 60
Chahine S.A.L.
Gerge Zeidan St., Chahine
Bldg., Achrafieh, P.O.Box: 165857
Beirut, LEBANON
TEL: (01) 20-1441
ROMANIA
Roland Elektronische
Musikinstrumente HmbH.
Austrian Office
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni,
ROMANIA
TEL: (266) 364 609
QATAR
RUSSIA
SAUDI ARABIA
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
MuTek
3-Bogatyrskaya Str. 1.k.l
107 564 Moscow, RUSSIA
TEL: (095) 169 5043
aDawliah Universal
Electronics APL
Corniche Road, Aldossary
Bldg., 1st Floor, Alkhobar,
SAUDI ARABIA
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
TEL: (2) 666 10529
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: 3916 6200
FINLAND
Roland Scandinavia As, Filial
Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844
Norderstedt, GERMANY
TEL: (040) 52 60090
GREECE
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint,
HUNGARY
TEL: (23) 511011
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
Al Emadi Co. (Badie Studio &
Stores)
P.O. Box 62, Doha, QATAR
TEL: 4423-554
SPAIN
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: 93 308 10 00
Owner’s Manual
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
REUNION ISLAND
TEL: (0262) 218-429
When you need repair service, call your nearest Roland Service Center or authorized Roland
distributor in your country as shown below.
Owner’s Manual
We’d like to take a moment to thank you for purchasing the Roland Percussion Sound Module TD-20.
201b
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY
INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3), and “IMPORTANT NOTES”
(p. 5). These sections provide important information concerning the proper operation
of the unit. Additionally, in order to feel assured that you have gained a good grasp
of every feature provided by your new unit, Owner’s manual should be read in its
entirety. The manual should be saved and kept on hand as a convenient reference.
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
SYRIA
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
UKRAINE
TIC-TAC
Mira Str. 19/108
P.O. Box 180
295400 Munkachevo,
UKRAINE
TEL: (03131) 414-40
Technical Light & Sound
Center
Rawda, Abdul Qader Jazairi St.
Bldg. No. 21, P.O.BOX 13520,
Damascus, SYRIA
TEL: (011) 223-5384
TURKEY
Ant Muzik Aletleri Ithalat Ve
Ihracat Ltd Sti
Siraselviler Caddesi
Siraselviler Pasaji No:74/20
Taksim - Istanbul, TURKEY
TEL: (0212) 2449624
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai,
U.A.E.
TEL: (04) 3360715
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
NORTH AMERICA
CANADA
Roland Canada Music Ltd.
(Head Office)
5480 Parkwood Way
Richmond B. C., V6V 2M4
CANADA
TEL: (604) 270 6626
MIDDLE EAST
BAHRAIN
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
TEL: 211 005
CYPRUS
Radex Sound Equipment Ltd.
17, Diagorou Street, Nicosia,
CYPRUS
TEL: (022) 66-9426
IRAN
MOCO, INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
TEL: (021) 285-4169
Roland Canada Music Ltd.
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
TEL: (905) 362 9707
U. S. A.
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
TEL: (323) 890 3700
234
*
CompactFlash and
are trademarks of SanDisk Corporation and licensed by
CompactFlash association.
235
*
Roland Corporation is an authorized licensee of the CompactFlash™ and CF logo (
trademarks.
)
236
*
Fugue © 2004 Kyoto Software Research, Inc. All rights reserved.
237
As of August 20, 2004 (ROLAND)
*
V-LINK (
) is a trademark of Roland Corporation.
202
03453923
’04-10-4N
Copyright © 2004 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement