Mitsubishi Electric PROJ-WM2 project mount

PROJ-WM2 Short-Throw Projector Arm
Part #: PROJ-WM2
The PROJ-WM2 short-throw projector arm is crafted to support the Mitsubishi
XD500U-ST (XGA) and WD500U-ST (WXGA) short-throw projectors.
Designed with unique features such as a wall-mounted GearBox™ to hold
a small PC, Mac Mini or other control device (Crestron, Extron etc.), the
PROJ-WM2 offers many conveniences for both installer and end-user.
Offering more adjustability than any other projector arm on the market,
the PROJ-WM2 adjusts from 37” to 67” from the wall.
Unlike lesser models, the PROJ-WM2 does not require a stud to be located
in the center of the whiteboard/screen. It can mount to single or dual studs
(16”, 18” and 24”), as well as concrete and steel stud construction and
features integrated lateral shift for finite adjustment to center of screen.
Supports projectors up to 75 lbs.
Telescoping adjustable arm from 37”-67” from the wall
Includes wall-mounted storage box
Integrated cable management
Quick & simple installation process
Mounts to single and dual studs, steel studs and concrete
Includes universal projector mount
Ideal for interactive & non-interactive white boards
+/-16.5° tilt
+/-7.5° roll
360° yaw
Lifetime Warranty
Mitsubishi Digital Electronics America, Inc.
Presentation Products Division
9351 Jeronimo Road
Irvine, CA92618
Toll Free: 888-307-0349
Warning: This wall mount must be mounted on a
solid wall or wall studs.
Note: All mounts and accessories listed in this literature
are 3rd party products. Mitsubishi Digital Electronics is not
responsible for defects or liability associated with these products.
Universal Short-Throw Projector Arm
Model: PROJ-WM2